ASoC/soundwire: Intel: reset the PCMSyCM registers in hda_sdw_bpt_close
Resetting the PCMSyCM registers is required for Intel SoundWire stream. The
same procedure is done in sdw_hda_dai_hw_params() for the normal
SoundWire stream, too.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://patch.msgid.link/20260730012518.2180906-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Thu, 30 Jul 2026 08:59:14 +0000 (11:59 +0300)]
ASoC: SOF: sof-audio: Fix error path in sof_widget_setup_unlocked()
If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget
setup we would double decrement the use_count of the widget because the
sof_widget_free_unlocked() would be called twice, similarly the core_put
would be invoked twice as well.
Since the use_count and core_put() is handled within the widget_free
function we need to return without falling through the pipe_widget_free
label.
The fixes tag is picked to the last change around this part of the code
which is adequately old enough for backporting purposes.
ASoC: SOF: topology: Use acpi mach from the machine driver
The parameters may be changed by the sof_sdw machine driver is the
SOC_SDW_PCH_DMIC quirk is set. Use the mach_params from the machine
driver to ensure the sof_sdw_get_tplg_files() function select the right
function topologies.
Fixes: 2fbeff33381c ("ASoC: Intel: add sof_sdw_get_tplg_files ops") Cc: stable@vger.kernel.org Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20260730071724.22296-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Thu, 30 Jul 2026 05:48:22 +0000 (08:48 +0300)]
ASoC: SOF: ipc4-topology: Refresh copier IPC payload before widget setup
The ipc_config_data buffer for copier widgets is built once during
ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached
for reuse. For host copiers this buffer contains the copier_data with
gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes
a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link
DMA.
On suspend/resume, both host and link DMA streams are released and
re-allocated with potentially different stream tags. The underlying
copier_data and dma_config_tlv structures are correctly updated by
host_config and sdw_hda_dai_hw_params respectively. However, since the
widget list (spcm->stream[].list) persists across suspend,
sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare
never runs again to rebuild ipc_config_data. The stale cached payload
is then sent to firmware with boot-time DMA channel assignments, causing
DMA channel conflicts that lead to firmware errors and crashes.
Fix this by refreshing copier_data and dma_config_tlv portions of
ipc_config_data in sof_ipc4_widget_setup right before the IPC message
is sent. This ensures the payload always reflects the current DMA state
regardless of whether ipc_prepare ran.
For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily
inflated to include the TLV size (matching the ipc_config_data layout)
before copying, then restored, mirroring what
sof_ipc4_prepare_copier_module does when first building the buffer.
Lenovo Legion 7 15ASH11 with AMD RYZEN AI MAX+ 392 (Strix Halo, ACP
7.0) uses Realtek ALC287 series codec and no any DMIC connected by ACP.
All DMICs directly connet with ALC codec.
Without this quirk, Input Device of Gnome Sound settings shows Internal
Stereo Microphone and Digital Microphone by default. In fact, Digital
Microphone of ACP doesn't work due to no connecting with ALC287 codec,
the Internal Stereo Microphone as analog device based on snd_hda_intel
driver can work well.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the Lenovo Yoga Pro 7 15ASH11.
ASoC: sophgo: return 1 on volume change in cv1800b_adc_volume_set()
cv1800b_adc_volume_set() serves as the .put callback for the "Internal
I2S Capture Volume" control.
ALSA mixer control callbacks must return 1 when the register value is
modified, 0 if unchanged, or a negative error code on failure. Returning
0 unconditionally causes ALSA core to assume the value was unchanged,
suppressing SNDRV_CTL_EVENT_MASK_VALUE change notifications to userspace
sound servers (e.g. PipeWire/PulseAudio).
Fix this by comparing the new register value with the existing register
value. If unchanged, return 0; otherwise, write the updated value and
return 1.
ASoC: tas2781: Use correct calibration data for SINEGAIN2 register
The SINEGAIN2_REG case in cali_reg_update() references t->sin_gn[]
rather than t->sin_gn2[], causing the second pilot tone gain
calibration to be programmed with the wrong register address.
These are distinct fields in struct fct_param_address and are
populated from separate firmware parameters by the parser in
tas2781-fmwlib.c.
Mark Brown [Mon, 27 Jul 2026 17:47:11 +0000 (18:47 +0100)]
ASoC: Fix races on creation of SDCA jack detection
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Currently there exists a couple races that can result in the DAPM graph
coming up in a state that doesn't match the hardware with respect to
SDCA jack detection. This series fixes these up by adding a component
level fixup_controls helper into the asoc core and shuffling around the
IRQ requests from the SDCA side.
The core creates DAPM widgets/routes quite a long time before
it creates the associated ALSA control, and the jack detection
IRQ is currently registered in component probe. At the time of
component probe, the DAPM widgets exist, shortly after this the
DAPM routes are added. At the time the DAPM routes are added the
register value for the control is checked and the appropriate path
is connected. The existing handling in the SDCA jack IRQ handles
the case the control doesn't exist and updates the registers
directly, which works until the DAPM routes are added. After the
routes are added the DAPM graph has already set connected on a
particular DAPM path, which will not be updated until an IRQ is
received when the control is present. Thus those updates are
usually not reflected in the resulting DAPM graph which can lead
to the audio path being erroneously powered on/off.
Charles Keepax [Tue, 21 Jul 2026 14:36:36 +0000 (15:36 +0100)]
ASoC: SDCA: Move kcontrol search out of IRQ
Now that the IRQs are always registered after all the ALSA
controls are created it is possible to search for the control
at the point the IRQ is requested. Move the control search out
of the IRQ handler and do it at IRQ request time.
This also fixes a potential issue when the card was torn down
and reprobed without destroying the codec device, the kctl
pointer stored by the IRQ handler would not be updated to the
new control on the second probe.
Charles Keepax [Tue, 21 Jul 2026 14:36:35 +0000 (15:36 +0100)]
ASoC: SDCA: Switch to fixup_controls callback for IRQ registration
Currently there are some race conditions around the boot of SDCA
jack detection. The core creates DAPM widgets/routes quite a
long time before it creates the associated ALSA control, and
the jack detection IRQ is currently registered in component
probe. At the time of component probe, the DAPM widgets exist,
shortly after this the DAPM routes are added. At the time the DAPM
routes are added the register value for the control is checked
and the appropriate path is connected. The existing handling
in the SDCA jack IRQ handles the case the control doesn't exist
and updates the registers directly, which works until the DAPM
routes are added. After the routes are added the DAPM graph has
already set connected on a particular DAPM path, which will not
be updated until an IRQ is received when the control is present.
Thus those updates are usually not reflected in the resulting
DAPM graph which can lead to the audio path being erroneously
powered on/off.
Switch to the new fixup_controls callback to register the
IRQs, this is guaranteed to run after all the controls have
been created. Which means we can avoid the aforementioned race
condition and as a bonus no longer need to concern ourselves
with a case where the IRQ handler runs and the ALSA control
is unavailable.
This allowed the machine driver to take actions after all the
card controls have been added. However, there are times when a
codec driver would also want to do things like obtain references
to controls for later use, which require all the controls to be
present. Add a component level fixup_controls callback, echoing
the card level option.
Charles Keepax [Tue, 21 Jul 2026 14:36:33 +0000 (15:36 +0100)]
ASoC: SDCA: Populate IRQ data earlier
Currently, the IRQ data (attached Entity/Control/etc) is populated
as the IRQ is requested. However, this can cause issues as
occasionally the setup process wants to access specifics of
an IRQ before the IRQ is actually enabled. To facilitate this
cache all the IRQ data during sdca_irq_populate_early() and make
sdca_irq_populate() simply request the outstanding IRQs. This
also has the advantage that sdca_irq_populate() can now just
iterate through the IRQ array which is much smaller/faster than
going through every Entity in the Function for Controls.
Charles Keepax [Tue, 21 Jul 2026 14:36:31 +0000 (15:36 +0100)]
ASoC: SDCA: Add sdca_irq_cleanup_late()
The SDCA IRQs are split into two groups, those registered at bus probe
time (basically just FDL) and those registered at component time.
There currently exists only a single cleanup function, if the FDL IRQ
is freed at component time, then nothing would re-register it if the
component is probed again. But the IRQs depending on a component need
to be freed if the card is destroyed so they can't use stale
components.
Split the clean up into two functions one for the component level and
one for the bus level.
Merge tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- vfs: Preserve the ACL_DONT_CACHE state in forget_cached_acl().
ACL_DONT_CACHE is meant to be a permanent opt-out from ACL caching
which FUSE relies on for servers that don't negotiate FUSE_POSIX_ACL.
The helper replaced it with ACL_NOT_CACHED, silently re-enabling the
cache, and as fuse doesn't invalidate the cache for such servers a
properly timed get_acl() returned stale ACLs. Comes with a fuse
selftest reproducing this.
- pidfs:
- Preserve PIDFD_THREAD when a thread pidfd is reopened via
open_by_handle_at(). PIDFD_THREAD shares the O_EXCL bit which
do_dentry_open() strips after the flags have been validated, so
the reopened pidfd silently became a process pidfd. Comes with a
selftest.
- Add a pidfs_dentry_open() helper so the regular pidfd allocation
path and the file handle path share the code that forces O_RDWR
and reapplies the pidfd flags that do_dentry_open() strips.
- Handle FS_IOC32_GETVERSION in the compat ioctl path.
- Make pidfs_ino_lock static.
- iomap:
- Fix the block range calculation in ifs_clear_range_dirty() so a
partial clear doesn't drop the dirty state of blocks the range
only partially covers.
- Support invalidating partial folios so a partial truncate or hole
punch with blocksize < foliosize doesn't leave stale dirty bits
behind.
- Only set did_zero when iomap_zero_iter() actually zeroed
something.
- Guard ifs_set_range_dirty() and ifs_set_range_uptodate() against
zero-length ranges where the unsigned last-block calculation
underflows and bitmap_set() writes far beyond the ifs->state
allocation.
- Don't merge ioends with different io_private values as the merge
could leak or corrupt the private data of the individual ioends.
- exec:
- Raise bprm->have_execfd only once the binfmt_misc interpreter has
actually been opened. The flag was set as soon as a matching 'O'
or 'C' entry was found. If the interpreter open failed with
ENOEXEC the exec fell through to the next binary format with
have_execfd raised but no executable staged and begin_new_exec()
NULL derefed past the point of no return.
- Fix an unsigned loop counter wrap in transfer_args_to_stack() on
nommu. An overlong argument or environment string pushes bprm->p
below PAGE_SIZE, the stop index becomes zero, and the loop never
terminates, wrapping its counter and copying garbage from in
front of the page array into the new process stack.
- Make binfmt_elf_fdpic only honour the first PT_INTERP like
binfmt_elf does. Each additional PT_INTERP overwrote the previous
interpreter, leaking the name allocation and the interpreter file
reference together with the write denial open_exec() took,
leaving the file unwritable for as long as the system runs.
- overlayfs:
- Compare the full escaped xattr prefix including the trailing dot.
An xattr like "trusted.overlay.overlayfoo" was misclassified as
an escaped overlay xattr.
- Check read access to the copy_file_range() source with the
source's mounter credentials.
- super: Thawing a filesystem whose block device was frozen with
bdev_freeze() deadlocked. Dropping the last block layer freeze
reference from under s_umount ends up in fs_bdev_thaw() which
reacquires s_umount on the same task. Pin the superblock with an
active reference instead and call bdev_thaw() without holding
s_umount.
- procfs: Return EACCES instead of success when the ptrace access check
for namespace links fails.
- afs: Use afs_dir_get_block() rather than afs_dir_find_block() for
block 0 in afs_edit_dir_remove(), matching afs_edit_dir_add().
- Push the memcg gating of ->nr_cached_objects() down into the btrfs
and shmem callbacks instead of skipping every callback during
non-root memcg reclaim. The blanket check short-circuited XFS whose
inode reclaim hook is intentionally driven from per-memcg contexts to
free memcg-charged slab.
- eventpoll: Pin files while checking reverse paths.
Since struct file became SLAB_TYPESAFE_BY_RCU a concurrent close
could free and recycle the file under the check which then took and
dropped the f_lock of whatever live file now occupies that slot.
* tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix emergency thaw deadlock on frozen block devices
pidfs: make pidfs_ino_lock static
eventpoll: pin files while checking reverse paths
fs: push nr_cached_objects memcg gating into individual filesystems
afs: Fix afs_edit_dir_remove() to get, not find, block 0
iomap: prevent ioend merge when io_private differs
iomap: add comments for ifs_clear/set_range_dirty()
iomap: fix out-of-bounds bitmap_set() with zero-length range
iomap: fix incorrect did_zero setting in iomap_zero_iter()
iomap: support invalidating partial folios
iomap: correct the range of a partial dirty clear
fs/super: fix emergency thaw double-unlock of s_umount
pidfs: handle FS_IOC32_GETVERSION in compat ioctl
ovl: check access to copy_file_range source with src mounter creds
proc: Fix broken error paths for namespace links
pidfs: add pidfs_dentry_open() helper
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
ovl: fix trusted xattr escape prefix matching
selftests/fuse: add ACL_DONT_CACHE regression test
...
Merge tag 'regulator-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"One driver specific fix where one of the MediaTek drivers duplicated
some core code buggily, and a core fix for an ordering issue on
startup where we could end up configuring a voltage outside of
constraints due to the order in which we applied constraints"
* tag 'regulator-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: clamp voltage constraints before applying apply_uV
regulator: mt6358: use regmap helper to read fixed LDO calibration
Merge tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/etc driver fixes for 7.2-rc5 that
resolve a bunch of different reported issues. Included in here are:
- rust_binder error message reporting fix
- stratix10-svc firmware driver fixes
- mei driver fix
- intel_th hardware tracing driver fix
- comedi driver fix
- uio_hv_generic driver fix
- ntsync selftest fix
- nsm misc driver fix
- some MAINTAINER file updates
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: Update wine-devel list address
rust_binder: only print failure if error has source
intel_th: fix MSC output device reference leak
misc: nsm: pin the module while the device is open
mei: bus: access mei_device under device_lock on cleanup
misc: nsm: only unlock nsm_dev on post-lock error paths
selftests: ntsync: correct CONFIG_NTSYNC name
comedi: comedi_parport: deal with premature interrupt
uio_hv_generic: Bind to FCopy device by default
MAINTAINERS: Add Greg Kroah-Hartman to GPIB
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Merge tag 'staging-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.2-rc5. They both resolve
some reported bugs in the rtl8723bs staging driver and have been in
linux-next for over a week with no reported issues"
* tag 'staging-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
staging: rtl8723bs: fix inverted HT40 secondary channel offset
Merge tag 'trace-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Move rb_desc->nr_page_va before updating dynamic array
The rb_descr->page_va is a dynamic array counted by nr_page_va. But
the updating of the page_va[] is done before the nr_page_va is
incremented causing a build with CONFIG_UBSAN_BOUNDS to flag it as an
overflow.
Move the increment of the counted by value before the array element
is updated.
- Propagate errors from remote event bulk updates
The return value of trace_remote_enable_event() was not being checked
by remote_events_dir_enable_write() where it would silently fail.
Have it check the return value and propagate that back up to user
space.
- Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was created in 2008 before the trace_pipe had a
close callback to allow tracers to do clean up from trace_pipe open.
The trace_pipe close cleanup callback was added in 2009 but the
mmiotrace tracer was not updated. It had a hack to do the cleanup in
the read call, where it may leak if user space did not read the
entire buffer.
Add a callback to mmiotrace trace_pipe close do to the cleanup
properly.
- Fix a possible NULL pointer dereference in the mmiotrace tracer
If the mmio_pipe_open() fails to find a PCI device, it will set the
hiter->dev pointer to NULL. The read function will blindly
dereference that pointer. Fix the read call to check to see if that
pointer is populated before dereferencing it.
- Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt'
atomic variable share the same memory space in a union. The filter on
module logic only checked if the 'module' was set to determine if the
event belonged to the module. As dynamic events are always builtin,
it doesn't need the 'module' field of the structure and used a
refcount. But the module filtering logic would then mistaken these
dynamic events as a module and call module_name(event->module) on it.
Add a check to see if the event is a dynamic event and if so, do not
check it for being part of the given module.
- Reset the top level buffer in selftests before running instances
The ftracetest selftest initializes each instance before executing
the tests. But it does not reset the top level buffer. Dynamic events
are only added and removed by the top level so any left over dynamic
events will not be removed by the reset in the instances.
Left over dynamic events can cause the tests to incorrectly fail.
Reset the top level buffer before running the instances.
- Make the context_switch counter 64 bit
The code to read user space for a system call trace event or for a
trace_marker will disable migration, enable preemption, read user
space into a per CPU buffer, disable preemption and enable migration
again. It checks if the per CPU context switch counter to see if it
changed, and if it did not, it would know that the per CPU buffer was
not touched by another task.
But the save counter was 32 bit and it would compare it to the 64 bit
context_switch variable. A long running system could have the
context_switch variable greater that 1<<32 in which case the compare
will always fail. The compare will promote the 32 bit int saved value
to 64 bit and compare it to the full 64 bit counter. Since the top 32
bits of the saved value was zero, it would never match.
- Fix a use-after-free of the event_enable trigger
The event_enable trigger allows for enabling one event when another
event is triggered. When the trigger is removed, it must go through a
synchronization phase to make sure it is not triggered again. The
trigger itself is delayed by the "bulk delay" logic that was recently
added. But the code that frees the event_enable data used to rely on
the trigger code to do the synchronization. Now that the code uses
the call RCU functions (and a workqueue), that delay no longer is
there.
Add a callback private_data_free() function that allows triggers to
clean up data after the synchronization phase has completed.
- Move the module_ref counter into the delay callback
Since an event of the event_enable trigger can enable an event for a
module, it ups the module ref count for that event's module. This
prevents the event from trying to enable an event that no longer
exists and cause a use-after-free bug.
The ref counter was set back down when the trigger was removed but
not after thy synchronization phase. This could lead to the module
data being accessed after module was unloaded.
Move the module ref decrement into the private_data_free() callback
of the event_enable trigger.
- Add mutex to protect parser in ftrace filtering
The set_ftrace_filter file uses a parsing descriptor that is
allocated at open and modified by writes. If multiple threads were to
write to the descriptor at the same time, it can corrupt the parser.
Add a mutex around the modifications of the parser descriptor.
- Fix possible corruption in perf syscall tracing
The perf system call trace events can now read user space. To do so,
the reads of user space enable preemption and disables it again.
During this time that preemption is enabled, the task can migrate.
The perf event list head is assigned via a per CPU pointer. It is
done before the user space part is called. If the user space reading
migrates the task to another CPU, then the head pointer is no longer
valid.
Re-assign the head pointer after the reading of user space to keep it
using the correct data.
* tag 'trace-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: perf: Fix stale head for perf syscall tracing
ftrace: Add global mutex to serialize trace_parser access
tracing: Delay module ref count for "enable_event" trigger
tracing: Fix use-after-free freeing trigger private data
tracing: Fix context switch counter truncation
selftests/ftrace: Reset triggers at top level before instance loop
tracing: Fix union collision of module and refcnt for dynamic events
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
tracing: Fix resource leak on mmiotrace trace_pipe close
tracing: Propagate errors from remote event bulk updates
tracing/remotes: Fix page_va[] access before counter update in trace_remote_alloc_buffer()
Merge tag 'm68knommu-fixes-on-top-off-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
- fix broken local SoC IO accesses for ColdFire
* tag 'm68knommu-fixes-on-top-off-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: fix breakage of missed IO access update
Merge tag 'x86-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
- Disable jump/lookup tables in the x86 boot decompressor code
a bit more widely, because newer versions of LLVM started
optimizing it a bit better and introduced run-time relocations
in PIE code (Nathan Chancellor)
* tag 'x86-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Disable jump tables
Merge tag 'smp-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP debug fixes from Ingo Molnar:
- SMP-call fixes when CSD lock debugging is enabled (Chuyi Zhou)
* tag 'smp-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Make CSD lock acquisition atomic for debug mode
smp: Avoid invalid per-CPU CSD lookup with CSD lock debug
super: fix emergency thaw deadlock on frozen block devices
do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount
exclusively. If the block device was frozen via bdev_freeze() dropping
the last block layer freeze reference calls fs_bdev_thaw() which
reacquires s_umount:
The emergency thaw worker deadlocks against itself holding both
s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount,
freeze, or thaw of that filesystem and block device.
bdev_super_lock() even documents the violated requirement with
lockdep_assert_not_held(&sb->s_umount).
Acquiring bd_fsfreeze_mutex under s_umount also inverts the
bd_fsfreeze_mutex vs. s_umount ordering established by
bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer
freeze even when the recursive path isn't hit.
Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin
the superblock with an active reference instead as
filesystems_freeze_callback() does. The active reference keeps the
superblock from being shut down and so ->s_bdev stays valid without
holding s_umount. The block-layer-held freeze is dropped by
fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as
a regular unfreeze would and thaw_super_locked() handles
filesystem-level freezes as before.
The emergency thaw path has deadlocked like this in one form or
another for a long long time but the current exclusively-held
shape dates back to commit [1] where thaw_bdev() already ended in
thaw_super() with s_umount held by do_thaw_all_callback().
Merge tag 'rust-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- 'zerocopy' crates: update to v0.8.54 to fix a modpost error under
'CONFIG_CC_OPTIMIZE_FOR_SIZE=y'.
There are actually two updates in the PR: the one to v0.8.52 is
fairly large and was originally not intended for a fixes PR, but the
actual fix landed in the v0.8.54 one. Thus I included both here.
The v0.8.52 update includes two things upstream added for us:
'--cfg no_fp_fmt_parse' to avoid a local workaround, and the new
'most_traits' feature.
The good news is that, after these updates, the delta with upstream
is now trivial: only an identifier prefix change and the SPDX
parentheses.
- Fix an objtool warning by adding one more 'noreturn' function for
Rust 1.99.0 (expected 2026-10-01).
- Clean up new 'semicolon_in_expressions_from_macros' lint errors for
Rust 1.99.0 (expected 2026-10-01). The lint can be allowed, but it
will be a hard error at some point in the future anyway, so clean it
up now.
- Locally allow new 'suspicious_runtime_symbol_definitions' lint for
Rust 1.98.0 (expected 2026-08-20).
- Globally allow 'clippy::unwrap_or_default' lint since it relies on
optimizations -- under 'CONFIG_CC_OPTIMIZE_FOR_SIZE=y' it does not
work well.
'kernel' crate:
- 'time' module: fix 'Delta::as_micros_ceil()' to round negative values
correctly"
* tag 'rust-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: fix as_micros_ceil() to round correctly for negative Delta
rust: device: avoid trailing ; in printing macros
objtool/rust: add one more `noreturn` Rust function for Rust 1.99.0
rust: zerocopy: update to v0.8.54
rust: zerocopy: update to v0.8.52
rust: allow `clippy::unwrap_or_default` globally
rust: allow `suspicious_runtime_symbol_definitions` lint for Rust >= 1.98
Merge tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update header copies of kernel headers, including const.h, fs.h,
perf_event.h, gfp_types.h, kvm.h, cpufeatures.h, rtnetlink.hp,
msr-index.h, drm.h and socket.h
- Add some build files related to BPF skels to .gitignore
* tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers: Sync KVM headers with the kernel sources
tools headers: Sync UAPI linux/fs.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers: Sync UAPI drm/drm.h with kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers: Sync linux/gfp_types.h with the kernel sources
tools headers UAPI: Sync linux/rtnetlink.h with the kernel sources
tools headers UAPI: Sync linux/const.h with the kernel sources
perf bench bpf: Add missing .gitignore file
Merge tag 'loongarch-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- fix build warnings and errors
- move jump_label_init() before parse_early_param()
- retrieve CPU package ID from PPTT when available
- fix some bugs kgdb, BPF JIT and laptop platform driver bugs
* tag 'loongarch-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Explicitly reset bl_powered state when suspend
platform/loongarch: laptop: Stop setting acpi_device_class()
LoongArch: BPF: Fix memory leak in bpf_jit_free()
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
LoongArch: Fix oops during single-step debugging
LoongArch: Fix address space mismatch in kexec command line lookup
LoongArch: Retrieve CPU package ID from PPTT when available
LoongArch: Move jump_label_init() before parse_early_param()
LoongArch: Fix build errors due to wrong instructions for 32BIT
LoongArch: Increase TASK_STRUCT_OFFSET up to 2040 for 32BIT
Merge tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix a ublk recovery hang, where END_USER_RECOVERY without a
successful START_USER_RECOVERY could be satisfied by a stale
completion latch
- Fix a stack out-of-bounds read in the CDROMVOLCTRL ioctl
- MAINTAINERS email address update for Roger Pau Monne
* tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
MAINTAINERS: update my email address
cdrom: fix stack out-of-bounds read in CDROMVOLCTRL
ublk: wait on ublk_dev_ready() instead of ub->completion
Merge tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a missing ERESTARTSYS conversion in the read paths, which got
messed up back when some code consolidation was done for read
multishot support
- zcrx UAPI rename, dropping the abbreviated "notif" naming in favor of
"event" for consistency and to be less ambiguous for users. This was
added for 7.2, so let's rename it while we still can. No functional
or code changes, just a strict rename
* tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: rename notif to event
io_uring/zcrx: rename ZCRX_NOTIF_NO_BUFFERS
io_uring/zcrx: drop "notif" from stats struct names
io_uring/rw: fix missing ERESTARTSYS conversion in read paths
Steven Rostedt [Fri, 24 Jul 2026 23:32:10 +0000 (19:32 -0400)]
tracing: perf: Fix stale head for perf syscall tracing
The code that can read the user space parameters of a system call may
enable preemption and migrate. The head of the per CPU perf events list
may be pointing to the wrong CPU event if the code migrates the task.
Reassign the head pointer if the system call event called the code that
may have caused a migration.
ftrace: Add global mutex to serialize trace_parser access
In ftrace, the trace_parser structure is allocated and initialized when
a trace file is opened, and is subsequently used across write and release
handlers to parse user input.
The affected handler paths and their specific functions are:
- Open paths: ftrace_regex_open(), ftrace_graph_open()
- Write paths: ftrace_regex_write(), ftrace_graph_write()
- Release paths: ftrace_regex_release(), ftrace_graph_release()
If userspace opens a trace file descriptor and shares it across multiple
threads, concurrent write calls will race on the parser's internal state,
specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted
input or undefined behavior.
Fix this by adding a global mutex, parser_lock, to serialize all access
to trace_parser across write and release paths, preventing concurrent
corruption of parser state.
Fixes: e704eff3ff51 ("ftrace: Have set_graph_function handle multiple functions in one write") Fixes: 689fd8b65d66 ("tracing: trace parser support for function and graph") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260725024721.1983675-1-wutengda@huaweicloud.com Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Merge tag 'v7.2-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"This contains eight ksmbd fixes covering POSIX ACL handling, SMB
signing enforcement, DACL parsing and construction hardening, session
lifetime handling, and validation of malformed transform and
compressed SMB2 requests:
- preserve inherited POSIX ACL mask when creating objects.
- enforce the session signing requirement for plaintext SMB requests.
- harden DACL/ACE processing against size overflows, incomplete ACE
copies, and undersized SIDs.
- defer teardown of a previous session until NTLM authentication
succeeds.
- reject undersized encryption-transform and decompressed SMB2
requests before they can reach normal SMB2 request processing"
* tag 'v7.2-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: reject undersized decompressed SMB2 requests
ksmbd: validate minimum PDU size for transform requests
ksmbd: defer destroy_previous_session() until after NTLM authentication
ksmbd: validate ACE size against SID sub-authorities
ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL
ksmbd: bound DACL dedup walk to copied ACEs
ksmbd: enforce signing required by the session
ksmbd: preserve VFS inherited POSIX ACL mask
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Eduard Zingerman:
- Fix tcp_bpf_sendmsg() error path mistaking a concurrently-freed
sk_psock->cork for the local temporary message and freeing it again
(Chengfeng Ye)
- Reject passing scalar NULL to nonnull arg of a global subprog.
Previously the verifier did not account for the cases directly
passing scalars to a global subprog, e.g.: 'global_func(0);' would
pass even if 'global_func' argument was marked nonnull (Amery Hung)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
selftests/bpf: Test passing scalar NULL to nonnull global subprog
bpf: Reject passing scalar NULL to nonnull arg of a global subprog
Steven Rostedt [Fri, 24 Jul 2026 17:24:15 +0000 (13:24 -0400)]
tracing: Delay module ref count for "enable_event" trigger
Triggers are now delayed from freeing, but can still be triggered until
after the RCU grace period has ended. The freeing of the enable_event data
is put into the private_data_free() callback, but the put of the module
refcount is done immediately.
It is possible that if a module is removed that has an event that would
enable (or disable) it is still active, it can read the data of the module
after it is removed causing a use-after-free bug.
Move the trace_event_put_ref() that releases the module into the delayed
callback so that the module can not be removed until any reference to its
events are finished.
David Carlier [Fri, 24 Jul 2026 03:05:17 +0000 (04:05 +0100)]
tracing: Fix use-after-free freeing trigger private data
Commit 61d445af0a7c ("tracing: Add bulk garbage collection of freeing
event_trigger_data") moved the kfree() of event_trigger_data to a kthread
that runs tracepoint_synchronize_unregister() before freeing. That removed
the synchronization the trigger .free callbacks used to get implicitly and
inline from trigger_data_free().
event_hist_trigger_free(), event_hist_trigger_named_free() and
event_enable_trigger_free() free their satellite data (hist_data, cmd_ops,
enable_data) right after trigger_data_free() returns. With the
synchronization now deferred to the kthread, a concurrent tracepoint
handler can still reach that data through the list_del_rcu()'d trigger,
causing a use-after-free.
The histogram teardown must stay synchronous: remove_hist_vars() and
unregister_field_var_hists() have to detach a synthetic event from the
histogram before the trigger-removal write returns, otherwise a following
command races in and the synthetic-event removal fails with -EBUSY, as the
trigger-synthetic-eprobe.tc selftest catches. Make those callbacks wait
with the correct barrier - tracepoint_synchronize_unregister(), matching
the free kthread - before freeing.
The enable trigger has no such synchronous requirement, and a blocking
synchronize there would re-serialize the path that commit deliberately
deferred. Give it an optional private_data_free() callback that the free
kthread runs after its grace period, and free enable_data from there.
Link: https://patch.msgid.link/20260724030523.19081-1-devnexen@gmail.com Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Fixes: 61d445af0a7c ("tracing: Add bulk garbage collection of freeing event_trigger_data") Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Chengfeng Ye [Fri, 24 Jul 2026 10:38:56 +0000 (18:38 +0800)]
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which
drops and reacquires the socket lock. Its error path tries to decide
whether msg_tx names the local temporary message by comparing it with
the current value of psock->cork.
This comparison is unsafe when two threads send on the same socket:
Thread A Thread B
msg_tx = psock->cork
sk_msg_alloc() fails
sk_stream_wait_memory()
releases the socket lock acquires the socket lock
completes the cork
psock->cork = NULL
frees the cork
reacquires the socket lock
msg_tx != psock->cork
sk_msg_free(msg_tx)
The stale cork is therefore mistaken for the local temporary message
and freed again. KASAN reported:
BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50
Read of size 4 at addr ffff88810c908800 by task poc/90
Call Trace:
sk_msg_free+0x49/0x50
tcp_bpf_sendmsg+0x14f5/0x1cc0
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 89:
__kasan_kmalloc+0x8f/0xa0
tcp_bpf_sendmsg+0x16b3/0x1cc0
Freed by task 91:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
tcp_bpf_sendmsg+0xec3/0x1cc0
msg_tx can only name the stack-local tmp or the shared cork. Check for
tmp directly so a changed psock->cork cannot turn a shared message into
an apparent local one.
Merge tag 'drm-fixes-2026-07-25' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm pull request, small and scattered seems to be the new
normal, the ttm change is probably the largest, with xe being the
most. Alex was out this week so amdgpu is smaller and only has some
urgent fixes.
MAINTAINERS:
- update mailmap address
ttm:
- backup pages using correct order
gpusvm:
- fix mm leak on eviction
- properly zero page array in mm scanning
* tag 'drm-fixes-2026-07-25' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/amd/display: Fix missing DCE check in dm_gpureset_toggle_interrupts()
drm/amd/display: Fix flip-done timeouts on mode1 reset
Revert "drm/pagemap: Guard HPAGE_PMD_ORDER use with CONFIG_ARCH_ENABLE_THP_MIGRATION"
drm/vc4: Shut down BO cache timer before teardown
drm/tests: shmem: Set DMA mask to 64-bit in drm_gem_shmem
drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create()
drm/xe/i2c: Allow per domain unique id
drm/gma500: return errors from Oaktrail HDMI I2C reads
drm/vc4: hvs/v3d: Fix null dereference in unbind
drm/panel: fix unmet dependency bug for DRM_PANEL_HIMAX_HX83121A
drm/panel: s6e3ha8: fix unmet dependency on DRM_DISPLAY_HELPER
drm/panel: ilitek-ili9882t: fix unmet dependency for DRM_PANEL_ILITEK_ILI9882T
drm/panel: ilitek-ili9881c: do not fail probe if iovcc is absent
drm/v3d: Idle AXI transactions before disabling the clock on suspend
drm/v3d: Reach the GMP through the hub registers on V3D 7.x
mailmap: Update Maíra Canal's email address
drm/pagemap: Guard HPAGE_PMD_ORDER use with CONFIG_ARCH_ENABLE_THP_MIGRATION
drm/pagemap: Clear driver-provided PFNs from migration PFN array
drm/xe/vf: Add drm_dev guards when detaching CCS read/write buffers
accel: ethosu: Handle U85 internal chaining buffer
...
Merge tag 'ceph-for-7.2-rc5' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A bunch of assorted fixes with the majority being hardening against
malformed input and invalid data scenarios that don't happen in real
deployments but can be utilized to trigger use-after-free and similar
issues, some error path leak fixups and two patches from Max to avoid
a potential hang in __ceph_get_caps() and unintended nesting of
current->journal_info while handling replies from the MDS.
All marked for stable"
* tag 'ceph-for-7.2-rc5' of https://github.com/ceph/ceph-client:
ceph: avoid fs reclaim while using current->journal_info
ceph: add owner/capability checks for CEPH_IOC_SET_LAYOUT*
ceph: fix hanging __ceph_get_caps() with stale mds_wanted
rbd: Reset positive result codes to zero in object map update path
libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE
libceph: refresh auth->authorizer_buf{,_len} after authorizer update
ceph: fix refcount leak in ceph_readdir()
libceph: guard missing CRUSH type name lookup
libceph: remove debugfs files before client teardown
libceph: bound get_version reply decode to front len
ceph: fix writeback_count leak in write_folio_nounlock()
libceph: fix two unsafe bare decodes in decode_lockers()
ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps()
libceph: Reject monmaps advertising zero monitors
libceph: reject zero bucket types in crush_decode
libceph: Fix multiplication overflow in decode_new_up_state_weight()
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt fixes from Eric Biggers:
"A couple fixes for AI-detected bugs"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Avoid dynamic allocation in fscrypt_get_devices()
fscrypt: Add missing superblock check in find_or_insert_direct_key()
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"It's a bit all over the place, as I was hoping to fix a decade-old bug
in our seccomp handling on syscall entry and ended up collecting other
fixes in the meantime. You'll see the failed attempt (+revert) here
but I didn't want to hold off on the others any longer. Hopefully
we'll get that one squashed next week...
- Fix early_ioremap() of unaligned ACPI tables
- Remove bogus information from data abort diagnostics
- Fix kprobes recursion during single-step
- Fix incorrect constant in ESR address size fault macro
- Fix OOB page-table walk in memory hot-unplug notifier
- Fix OOB access to the linear map when retrieving an unaligned huge pte
- Fix MPAM register reset values
- Fix MPAM NULL dereference on teardown"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: make huge_ptep_get handled unaligned addresses
arm64/mm: Check the requested PFN range during memory removal
arm64: Correct value returned by ESR_ELx_FSC_ADDRSZ_nL()
arm64: kprobes: Allow reentering kprobes while single-stepping
arm64: kprobes: Only handle faults originating from XOL slot
drivers/virt: pkvm: Fix end calculation in mmio_guard_ioremap_hook()
Revert "arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates"
arm64: mm: When logging data aborts only decode Xs when ISV=1
arm64: fixmap: Allow 256K early_ioremap() at any offset
arm_mpam: guard MBWU state before adding it to garbage
arm_mpam: Fix MPAMCFG_MBW_PBM register setting
arm_mpam: Fix software reset values of MPAMCFG_PRI
arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates
Merge tag 'iommu-fixes-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Will Deacon:
"Joerg's away at the moment so I've been looking after the IOMMU tree
in his absence. In the process of doing that, I've hoovered up a
handful of fixes for the AMD and Intel drivers which address a
combination of the usual out-of-bounds/locking/leak bugs as well as
some logical issues around SVA and command completion.
AMD:
- Fix lockdep splat from nested domain allocation
- Fix nested domain leak
- Fix broken synchronisation of command completion
- Fix OOB write in "ivrs_acpihid" command-line parsing
VT-d:
- Prevent SVA for IOMMUs with non-coherent page-table walker
- Fix OOB write in PMU driver"
* tag 'iommu-fixes-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/intel: Fix out-of-bounds memset in dmar_latency_disable()
iommu/amd: Bound the early ACPI HID map
iommu/vt-d: Disallow SVA if page walk is not coherent
iommu/amd: Wait for completion instead of returning early in iommu_completion_wait()
iommu/amd: Fix nested domain leak
iommu/amd: Fix IRQ unsafe locking in gdom allocation
Usama Arif [Fri, 17 Jul 2026 17:32:52 +0000 (10:32 -0700)]
tracing: Fix context switch counter truncation
trace_user_fault_read() samples nr_context_switches_cpu() before enabling
preemption and retries the user copy if the counter changes. The helper
returns unsigned long long because rq->nr_switches is u64, but the saved
value is unsigned int.
Once a CPU has performed 2^32 context switches, assigning the counter to
cnt discards its upper bits. The comparison after the copy promotes cnt
back to unsigned long long, but the lost bits remain zero, so it reports a
change even when the task was never scheduled out. Every retry then fails
the same way until the 100-try guard warns and the user copy is abandoned.
This affects long-running systems and workloads with high context-switch
rates. A CPU switching 1,000 times per second takes about 50 days.
Store the sampled count in unsigned long long so the full value is
preserved.
Cc: stable@vger.kernel.org Fixes: 64cf7d058a00 ("tracing: Have trace_marker use per-cpu data to read user space") Link: https://patch.msgid.link/20260717173252.3431565-1-usama.arif@linux.dev Reported-by: Breno Leitao <leitao@debian.org> Signed-off-by: Usama Arif <usama.arif@linux.dev> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
selftests/ftrace: Reset triggers at top level before instance loop
When running instance tests, 'ftracetest' creates a new ftrace instance
and runs the tests inside it. Before starting each test, it executes
'initialize_system()' to reset the ftrace state to initial-state.
However, since 'initialize_system()' is executed in the context of the
instance directory, it only cleans up triggers and filters of that
instance.
Any triggers or dynamic events left behind in the top-level instance by
previous failed top-level tests, are left completely untouched. These
top-level leftovers can cause subsequent instance-based tests to fail
or even crash the kernel.
Fix this by executing 'initialize_system()' in the top-level tracing
directory once before entering the instance loop.
Cc: stable@vger.kernel.org Link: https://patch.msgid.link/178425671889.84440.9477850701738666404.stgit@devnote2 Fixes: b5b77be812de ("selftests: ftrace: Allow some tests to be run in a tracing instance") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing: Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt'
atomic variable share the same memory space in a union. For dynamic
events, the union member is 'refcnt', which acts as an active
reference counter.
When a dynamic event (such as kprobe, uprobe, fprobe, eprobe, or
wprobe) has a non-zero reference count (e.g. due to active event
triggers or perf attachments), its 'call->module' evaluates to a
small non-zero integer instead of NULL.
When filtering or setting events for a specific module (e.g., writing
':mod:<module>' to 'set_event'), the code in
'__ftrace_set_clr_event_nolock()' and 'update_event_fields()' reads
'call->module' directly without checking whether the event is dynamic.
This causes the kernel to treat the small integer (refcnt) as a
'struct module' pointer, leading to a NULL/invalid pointer dereference
(Oops) when dereferencing the module name.
Fix this by ensuring that the 'TRACE_EVENT_FL_DYNAMIC' flag is checked
before treating 'call->module' as a valid pointer in these code paths.
Steven Rostedt [Wed, 22 Jul 2026 01:11:43 +0000 (21:11 -0400)]
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
If the mmio_pipe_open() fails to find a PCI device, the hiter->dev
will be assigned to NULL. The mmiotrace read() function dereferences the
hiter->dev if hiter exists.
Change the test of the read to not only check hiter being NULL, but also
the hiter->dev before dereferencing it.
Leo Li [Thu, 23 Jul 2026 13:44:50 +0000 (09:44 -0400)]
drm/amd/display: Fix missing DCE check in dm_gpureset_toggle_interrupts()
This line was lost when cping from amd-staging-drm-next to drm-fixes.
So add it back.
Cc: stable@vger.kernel.org Fixes: 8382cd234981 ("drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock") Reported-by: Lu Yao <yaolu@kylinos.cn> Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20260723134450.13838-1-sunpeng.li@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Merge tag 'slab-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Prevent unbounded recursion in free path with memory allocation
profiling, which has caused a stack overflow on a Meta production
host due to a 125-deep __free_slab<->kfree recursion (Harry Yoo)
- Fix type-based partitioning confusing sparse which does not know
__builtin_infer_alloc_token() (Marco Elver)
- Fix a potential memory leak in bulk freeing path on NUMA machines
(Shengming Hu)
* tag 'slab-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: silence sparse warning with type-based partitioning
mm/slab: prevent unbounded recursion in free path with new kmalloc type
lib/alloc_tag: introduce mem_alloc_profiling_permanently_disabled()
mm/slab: decouple SLAB_NO_SHEAVES from SLAB_NO_OBJ_EXT
mm/slab: fix a memory leak due to bootstrapping sheaves twice
mm/slub: fix lost local objects when bulk remote free batch fills
Leo Li [Thu, 23 Jul 2026 18:01:59 +0000 (14:01 -0400)]
drm/amd/display: Fix flip-done timeouts on mode1 reset
The vblank on/off callbacks mixed use of amdgpu_irq_get/put() and
amdgpu_dm_crtc_set_vupdate_irq() to enable and disable IRQs.
With get/put, base driver will callback into DC to disable IRQs when
refcount == 0. With set_vupdate_irq(), DC is called directly to disable
IRQs, bypassing base driver's refcount tracking.
During gpu reset, base driver can restore IRQs via
amdgpu_irq_gpu_reset_resume_helper() > amdgpu_irq_update(). So if
get/put() is not used (i.e. refcount == 0), then vupdate_irq will be
disabled.
This is problematic if DRM requests vblank on before amdgpu_irq_update()
is called: drm_vblank_on() > set_vupdate_irq() enables vupdate_irq, but
the refcount is still 0. gpu_reset_resume_helper() > irq_update() then
immediately disables it, thus leading to flip done timeouts.
This is made worse on DCN since VUPDATE_NO_LOCK is the only IRQ enabled.
Prior to 8382cd234981, a combination of GRPH_FLIP and VSTARTUP IRQs were
used, and they used get/put(). This explains why 8382cd234981 exposed
this issue.
Fix by using get/put() instead of set_vupdate_irq(). DCE is unchanged,
since it relies on unbalanced enable/disable calls based on VRR status,
and hence requires direct set_vupdate_irq(). Plus, it also uses
GRPH_FLIP and VLINE IRQs, which are properly tracked by get/put().
Cc: stable@vger.kernel.org Fixes: 8382cd234981 ("drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock") Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20260723180159.52121-1-sunpeng.li@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Zixing Liu [Fri, 24 Jul 2026 08:33:14 +0000 (16:33 +0800)]
platform/loongarch: laptop: Explicitly reset bl_powered state when suspend
On EAECIS NL60R with EC firmware version 1.11, resuming from S3 has a
very high chance (>90%) of causing the EC to lose the previous backlight
power state. When this happens, the laptop resumes normally from S3, but
the backlight remains off (when shining on the screen with a flash light,
we can see the screen contents are updating normally).
Since there is no generic way to query the EC's backlight state on
Loongson laptop platforms, assume the worst-case scenario and restart
the backlight power inside the kernel each time the system resumes.
Cc: stable@vger.kernel.org Fixes: 53c762b47f72 ("platform/loongarch: laptop: Add backlight power control support") Tested-by: Yao Zi <me@ziyao.cc> Tested-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Zixing Liu <liushuyu@aosc.io> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The driver populates acpi_device_class() which is never read afterward,
so make it stop doing that and drop the symbol defined specifically for
this purpose.
No intentional functional impact.
This change will facilitate the removal of "device_class" from "struct
acpi_device_pnp" in the future.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Pu Lehui [Fri, 24 Jul 2026 08:33:08 +0000 (16:33 +0800)]
LoongArch: BPF: Fix memory leak in bpf_jit_free()
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts and
calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory
leak of the JIT context offsets array.
So fix this by adding the missing kvfree(jit_data->ctx.offset) in
bpf_jit_free().
Reported-by: Sashiko <sashiko-bot@kernel.org> Fixes: 4ab17e762b34 ("LoongArch: BPF: Use BPF prog pack allocator") Acked-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Dave Airlie [Fri, 24 Jul 2026 08:30:23 +0000 (18:30 +1000)]
Merge tag 'drm-misc-fixes-2026-07-24' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v7.2-rc5:
- Improve damage handling in appletbdrm.
- Fix harmful fragmenting of MM by backing up TTM pages at native
page order.
- Fix timeout handling in amdxdna.
- Fix imagination locking for map/unmap operations.
- Fix mm leak in gpusvm eviction.
- Properly zero page array in gpusvm mm scanning.
- Prevent trusted shader bo's from being mapped again in vc4.
- Validate shader array size in vmwgfx.
- Fix length calculation bugs in ethosu.
- Better error handling during pagemap migration.
- Improve v3d suspend.
- Kconfig updates for some panels.
- Handle missing iovcc in ili9881c panel.
- Fix vc4 unbind.
- Add i2c error handling in gma500.
- Fix kunit tests on pp64le and s390x.
- Prevent rearming vc4 timer on shutdown.
The original author requested it to be reverted, as it conflicts with
changes in the -next branch for MM:
"I'm not sure who is doing the drm-misc-fixes PR, but if you are can
you omit this patch: https://patchwork.freedesktop.org/series/170865/
I guess this conflicts with MM changes in their next tree and it easy
enough on our side to do this slightly differently to avoid a conflict
so going to post revert + a different change. If this is already sent nbd."
bpf: Reject passing scalar NULL to nonnull arg of a global subprog
A global subprogram argument tagged __arg_nonnull is set up as a
non-nullable PTR_TO_MEM. However the verifier does not check against a
scalar NULL, leading to real NULL pointer dereference. Reject it as
well.
Fixes: 94e1c70a3452 ("bpf: support 'arg:xxx' btf_decl_tag-based hints for global subprog args") Signed-off-by: Amery Hung <ameryhung@gmail.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://patch.msgid.link/20260723221815.367797-1-ameryhung@gmail.com Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Linmao Li [Mon, 20 Jul 2026 08:44:26 +0000 (16:44 +0800)]
drm/vc4: Shut down BO cache timer before teardown
The BO cache timer callback schedules time_work, and time_work can rearm
the timer through vc4_bo_cache_free_old().
vc4_bo_cache_destroy() deletes the timer and then cancels the work, which
does not break that cycle: the work being cancelled can rearm the timer,
and the timer then queues work again after teardown.
Use timer_shutdown_sync() instead, so the timer cannot be rearmed and the
cycle ends with cancel_work_sync().
Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Cc: stable@vger.kernel.org Signed-off-by: Linmao Li <lilinmao@kylinos.cn> Link: https://patch.msgid.link/20260720084426.1632508-1-lilinmao@kylinos.cn Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com>
Merge tag 'v7.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix leak in cifs_close_deferred_file()
- Fix resolving MacOS symlinks
- Fix stale file size in readdir
- Update git branches in MAINTAINERS file
- Fix bounds check in cifs_filldir
- Fix checks in parse_dfs_referrals()
- Fix DFS referral checks for malformed packet
* tag 'v7.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths
cifs: prevent readdir from changing file size due to stale directory metadata
smb: client: handle STATUS_STOPPED_ON_SYMLINK responses without a symlink target
Add missing git branch info for cifs and ksmbd to MAINTAINERS file
smb: client: bound dirent name against end of SMB response in cifs_filldir
smb: client: validate DFS referral PathConsumed
Charles Keepax [Wed, 22 Jul 2026 10:35:00 +0000 (11:35 +0100)]
ASoC: SDCA: Ensure that Control Range is large enough for header
When reading the Ranges structure from an SDCA Control, ensure that the
read data is large enough to encompass the required header before
accessing it.
Fixes: 64fb5af1d1bb ("ASoC: SDCA: Add parsing for Control range structures") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20260722103500.872714-5-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Wed, 22 Jul 2026 10:34:59 +0000 (11:34 +0100)]
ASoC: SDCA: Make UMP message size check more robust
If message offset was larger than the buffer length the size
check will pass incorrectly. Refactor the check such that it is
more robust to invalid sizes.
Fixes: daab108504be ("ASoC: SDCA: Add UMP buffer helper functions") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20260722103500.872714-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Wed, 22 Jul 2026 10:34:58 +0000 (11:34 +0100)]
ASoC: SDCA: Always free firmware in FDL path
In the case a disk firmware exists but is invalid and no SWFT firmware
exists fdl_load_file() will return without calling release_firmware().
Update the code to call this to ensure the firmware is released on the
error path.
Fixes: 71f7990a34cd ("ASoC: SDCA: Add FDL library for XU entities") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20260722103500.872714-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Wed, 22 Jul 2026 10:34:57 +0000 (11:34 +0100)]
ASoC: SDCA: Correct pointer passed to devm_acpi_table_put
devm_acpi_table_put() takes a struct acpi_table_header * but the value
passed in is struct acpi_table_header ** so the value passed to
acpi_put_table() is actually the pointer not the table itself.
Remove the extra reference to correct the passed value.
Fixes: c4d096c3ca42 ("ASoC: SDCA: Add SDCA FDL data parsing") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20260722103500.872714-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Merge tag 'net-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Lots of fixes, double the count even for the 'new normal'. Largely due
to my time off followed by a networking conference which distracted
most maintainers (less so the AI generators).
Including fixes from Bluetooth and WiFi.
Current release - regressions:
- wifi: mt76: fix MAC address for non OF pcie cards
Current release - new code bugs:
- mptcp: fix BUILD_BUG_ON on legacy ARM config
- wifi: cfg80211: guard optional PMSR nominal time
Previous releases - regressions:
- qrtr: ns: raise node count limit to 512, we arbitrarily picked
256 as a limit, turns out it was too low for real world deployments
- vhost-net: fix TX stall when vhost owns virtio-net header
- eth: amd-xgbe: fix MAC_AUTO_SW handling in CL37 AN
- wifi: ath12k: fix low MLO RX throughput on WCN7850
Previous releases - always broken:
- number of random AI fixes for SCTP, RDS and TIPC protocols
- more AI-looking fixes for WiFi drivers
- number of fixes for missing pointer reloading after skb pull
- vsock/virtio: collapse receive queue under memory pressure to avoid
client OOMing the host with tiny messages
- ipv4: icmp: fill flow parameters in icmp_route_lookup decoy lookup,
make sure the ICMP response routing follows the routing policy
- gro: fix double aggregation of flush-marked skbs
- ovpn: fix various refcount bugs
- tls: device: push pending open record on splice EOF
- eth: mlx5:
- use sender devcom for MPV master-up
- fix MCIA register buffer overflow on 32 dword reads"
* tag 'net-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (234 commits)
drop_monitor: perform u64_stats updates under IRQ-disabled section
drop_monitor: fix size calculations for 64-bit attributes
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
mptcp: fix BUILD_BUG_ON on legacy ARM config
selftests: mptcp: userspace_pm: fix undefined variable port
mptcp: fix stale skb->sk reference on subflow close
mptcp: pm: userspace: fix use-after-free in get_local_id
mptcp: decrement subflows counter on failed passive join
mac802154: hold an interface reference across the scan worker
sctp: don't free the ASCONF's own transport in DEL-IP processing
phonet: check register_netdevice_notifier() error in phonet_device_init()
phonet: pep: fix use-after-free in pep_get_sb()
bnge/bng_re: fix ring ID widths
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
net: airoha: fix ETS channel derivation in airoha_tc_setup_qdisc_ets()
mctp: check register_netdevice_notifier() error in mctp_device_init()
ptp: netc: explicitly clear TMR_OFF during initialization
rds: tcp: unregister sysctl before tearing down listen socket
ipv6: Change allocation flags to match rcu_read_lock section requirements
net: slip: serialize receive against buffer reallocation
...
Max Kellermann [Wed, 22 Jul 2026 11:49:31 +0000 (13:49 +0200)]
ceph: avoid fs reclaim while using current->journal_info
handle_reply() stores a `ceph_mds_request` pointer in
`current->journal_info` while filling the inode and dentry cache from
an MDS reply.
An allocation in this section can enter direct reclaim and prune
dentries from another filesystem. If this dirties an ext4 inode, ext4
starts a JBD2 transaction. JBD2 interprets the Ceph request in
`current->journal_info` as a journal handle and dereferences the
request's `r_tid` as `h_transaction`, causing a kernel crash, e.g.:
Enter a scoped NOFS allocation context and leave it after clearing
`journal_info`. This prevents filesystem reclaim from recursing into
another filesystem while the field contains Ceph-private data.
Max Kellermann [Tue, 21 Jul 2026 06:20:46 +0000 (08:20 +0200)]
ceph: add owner/capability checks for CEPH_IOC_SET_LAYOUT*
These permission checks were already missing in the initial
impementation of these ioctls. This Ceph allows any user who owns a
file descriptor to manipulate the layout of any file, even if they
don't have write permissions.
It might be a good idea to guard other ioctls with permission checks
as well or even disallow regular users (even if they own the file) to
manipulate layout settings completely, as this may be abused to DoS
the Ceph servers, but right now, I find it most urgent to have setter
checks at all.
Cc: stable@vger.kernel.org Fixes: 8f4e91dee2a2 ("ceph: ioctls") Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Reviewed-by: Xiubo Li <xiubo.li@clyso.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Max Kellermann [Mon, 6 Jul 2026 15:06:59 +0000 (17:06 +0200)]
ceph: fix hanging __ceph_get_caps() with stale mds_wanted
A reader can hang forever in __ceph_get_caps() when the client no
longer holds `FILE_RD`, but local cap state still says that the
capability is already wanted (via `mds_wanted`).
One way to trigger this is through MDS cap revocation. If another
client performs a conflicting operation, the MDS can revoke `FILE_RD`
from the reader; the next read then has to reacquire `FILE_RD`. If
the cap update that should request `FILE_RD` never reaches the MDS
after `cap->mds_wanted` was raised, the reader is left holding only
non-file caps while local `mds_wanted` still includes the file read
caps.
In that state, try_get_cap_refs() sees `need <= mds_wanted` and
returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap
update that was supposed to request `FILE_RD never reaches the MDS
after `cap->mds_wanted was` raised, no further request is sent and the
waiter can sleep indefinitely until unrelated cap traffic happens to
wake it up.
The ordering issue is that `cap->mds_wanted` is updated in
__prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually
queued for send. That makes one field serve two different meanings at
once: what this client wants, and what the client believes the MDS
already knows it wants.
A proper fix would be to split those states and track whether a cap
update is actually in flight or has been observed by the MDS.
However, simply moving the `cap->mds_wanted assignment` later would
not be sufficient: queueing the message in the messenger does not
guarantee that the MDS processed that specific wanted set, and
reconnect or message loss can still invalidate that assumption.
Fixing that properly would require a larger rework of the cap state
machine.
To allow simpler backports to stable kernels, this patch implements a
simpler workaround:
- stop waiting forever in __ceph_get_caps(); after a bounded wait,
fall back to the renew path
- make ceph_renew_caps() issue a synchronous `OPEN` request whenever
the inode still does not actually hold the wanted caps, instead of
only calling ceph_check_caps()
The extra issued-vs-wanted check in ceph_renew_caps() is necessary
because the previous test only checked whether the inode still had any
real caps at all. That is not enough after revocation: the client can
still hold something like `pLs` and yet be missing `FILE_RD`
completely. In that case, falling back to ceph_check_caps() is not
sufficient, because it still trusts `cap->mds_wanted` and may resend
nothing. By requiring `(issued & wanted) == wanted` before taking the
asynchronous path, the code only uses ceph_check_caps() when the
`wanted caps` are already actually issued. Otherwise, it sends the
synchronous `OPEN` renew.
This preserves the existing asynchronous fast path when the wanted
caps are already issued, avoids changing cap-state semantics, and
fixes the hang by guaranteeing that a stalled waiter eventually
retries through a path that does not rely on the stale `mds_wanted`
state.
[ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to
mds_client.h, formatting ]
Cc: stable@vger.kernel.org Fixes: 0a454bdd501a ("ceph: reorganize __send_cap for less spinlock abuse") Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Reviewed-by: Alex Markuze <amarkuze@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
rbd: Reset positive result codes to zero in object map update path
In a reply message to an RBD request, a positive result code indicates
a data payload, which is not allowed for writes. While
rbd_osd_req_callback() already resets a positive result code for writes
to zero, rbd_object_map_callback() does not. This allows a corrupted
reply to an object map update to trigger the rbd_assert(*result < 0) in
__rbd_obj_handle_request(). This happens, because
rbd_object_map_callback() calls rbd_obj_handle_request() ->
__rbd_obj_handle_request() and passes this positive result code. From
__rbd_obj_handle_request(), rbd_obj_advance_write() is called, which
leaves the positive result code unchanged and returns true. Therefore,
the if(done && *result) branch is executed in __rbd_obj_handle_request()
and the assertion triggers.
This patch fixes the issue by adjusting the logic in the
rbd_object_map_callback() path. A positive result code for an object map
update is now reset to zero (similar to rbd_osd_req_callback()), and the
message is subsequently handled the same way as if the result code was
zero from the beginning. Additionally, a WARN_ON_ONCE() is added for
this case.
Cc: stable@vger.kernel.org Fixes: 22e8bd51bb04 ("rbd: support for object-map and fast-diff") Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiang Mei [Tue, 9 Jun 2026 04:40:09 +0000 (21:40 -0700)]
libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE
__decode_pg_temp() decodes an user-controlled length but only rejects
values large enough to overflow the allocation; it does not bound it to
CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and
apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size
on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends
an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack
out-of-bounds write.
An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer
entries at decode time. The bound is well below the old overflow threshold, so
it also covers the allocation-size overflow the previous check guarded against.
BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds
Write of size 4 ... by task exploit
kasan_report (mm/kasan/report.c:595)
ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833)
calc_target (net/ceph/osd_client.c:1638)
__submit_request (net/ceph/osd_client.c:2394)
ceph_osdc_start_request (net/ceph/osd_client.c:2490)
ceph_osdc_call (net/ceph/osd_client.c:5164)
rbd_dev_image_probe (drivers/block/rbd.c:6899)
do_rbd_add (drivers/block/rbd.c:7138)
...
kernel BUG at net/ceph/osdmap.c:2670!
[ idryomov: do the same in __decode_pg_upmap_items() ]
Cc: stable@vger.kernel.org Fixes: a303bb0e5834 ("libceph: introduce and switch to decode_pg_mapping()") Reported-by: Weiming Shi <bestswngs@gmail.com> Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei <xmei5@asu.edu> Reviewed-by: Alex Markuze <amarkuze@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Shuangpeng Bai [Mon, 29 Jun 2026 17:14:22 +0000 (13:14 -0400)]
libceph: refresh auth->authorizer_buf{,_len} after authorizer update
ceph_x_create_authorizer() caches au->buf->vec.iov_base and
au->buf->vec.iov_len in struct ceph_auth_handshake. These
cached values are then used by the messenger connect code when
sending the authorizer.
ceph_x_update_authorizer() can rebuild the authorizer when a newer
service ticket is available. If the rebuilt authorizer no longer
fits in the existing buffer, ceph_x_build_authorizer() drops its
reference to au->buf and allocates a new one. If this is the final
reference, ceph_buffer_put() frees the old ceph_buffer and its
vec.iov_base, but auth->authorizer_buf still points at that freed
memory.
A subsequent msgr1 reconnect can therefore queue the stale pointer
and trigger a KASAN slab-use-after-free in _copy_from_iter() while
tcp_sendmsg() copies the authorizer.
Refresh auth->authorizer_buf and auth->authorizer_buf_len after a
successful authorizer rebuild so the messenger sends the current
buffer.
WenTao Liang [Thu, 11 Jun 2026 14:40:07 +0000 (22:40 +0800)]
ceph: fix refcount leak in ceph_readdir()
The ceph_readdir() function allocates a ceph_mds_request via
ceph_mdsc_create_request() and stores it in dfi->last_readdir. In
the directory entry processing loop, if the entry's offset is less
than ctx->pos or if the inode pointer is unexpectedly NULL, the
function returns -EIO without releasing the reference held by
dfi->last_readdir, causing a refcount leak.
Fix this by adding ceph_mdsc_put_request(dfi->last_readdir) before
returning on these error paths. Also set dfi->last_readdir to NULL
for safety, matching the cleanup done at the normal exit.
Cc: stable@vger.kernel.org Fixes: af9ffa6df7e3 ("ceph: add support to readdir for encrypted names") Signed-off-by: WenTao Liang <vulab@iscas.ac.cn> Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com> Reviewed-by: Alex Markuze <amarkuze@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Zhao Zhang [Fri, 19 Jun 2026 07:40:03 +0000 (15:40 +0800)]
libceph: guard missing CRUSH type name lookup
Localized read selection can walk a parent bucket whose name exists in
the CRUSH map while its type has no matching entry in type_names.
get_immediate_parent() then dereferences a NULL type_cn and passes an
invalid pointer into strcmp(), causing a null-ptr-deref.
Skip such malformed parent buckets unless both the bucket name and type
name metadata are present. This keeps malformed hierarchy data from
crashing locality lookup and safely falls back to "not local".
[ idryomov: add WARN_ON_ONCE ]
Cc: stable@vger.kernel.org Fixes: 117d96a04f00 ("libceph: support for balanced and localized reads") Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Assisted-by: Codex:GPT-5.4 Signed-off-by: Zhao Zhang <zzhan461@ucr.edu> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Douya Le [Mon, 15 Jun 2026 06:31:06 +0000 (14:31 +0800)]
libceph: remove debugfs files before client teardown
ceph_destroy_client() tears down the monitor client before removing
the per-client debugfs files. A concurrent read of the monmap debugfs
file can enter monmap_show() after ceph_monc_stop() has freed
monc->monmap, triggering a use-after-free.
Remove the debugfs files before stopping the OSD and monitor clients.
debugfs_remove() drains active handlers and prevents new accesses, so
the debugfs callbacks can no longer race the rest of client teardown.
Douya Le [Sun, 7 Jun 2026 09:35:49 +0000 (17:35 +0800)]
libceph: bound get_version reply decode to front len
handle_get_version_reply() uses msg->front_alloc_len as the decode
boundary for MON_GET_VERSION_REPLY. That is the size of the reused
reply buffer, not the number of bytes actually received.
A truncated reply can therefore pass ceph_decode_need() and decode the
second u64 from stale tail bytes left in the buffer by an earlier
message, causing an uninitialized memory read.
Use msg->front.iov_len as the receive-side decode boundary, matching
other libceph reply handlers and limiting decoding to the bytes that
were actually read from the wire.
Wentao Liang [Thu, 4 Jun 2026 02:19:51 +0000 (02:19 +0000)]
ceph: fix writeback_count leak in write_folio_nounlock()
write_folio_nounlock() increments fsc->writeback_count to track
in-flight writeback operations. On several error paths where the
function returns early (folio lookup failure, snapshot context
allocation failure, and writepages submission failure), the function
returns without calling atomic_long_dec_return() to decrement the
counter.
Each leaked increment keeps the counter above zero, which can prevent
the filesystem from cleanly unmounting or suspending writes.
Add atomic_long_dec_return() calls on all error paths that currently
return without decrementing the counter.
Cc: stable@vger.kernel.org Fixes: d55207717ded ("ceph: add encryption support to writepage and writepages") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pavitra Jha [Tue, 2 Jun 2026 04:17:35 +0000 (00:17 -0400)]
libceph: fix two unsafe bare decodes in decode_lockers()
decode_lockers() in cls_lock_client.c contains two bare decode operations
that allow a malicious or compromised OSD to trigger slab-out-of-bounds
reads:
1. ceph_decode_32(p) at the num_lockers field has no preceding bounds
check. ceph_start_decoding() accepts struct_len=0 as valid -- the
internal ceph_decode_need(p, end, 0, bad) always passes -- so when an
OSD sends struct_len=0, ceph_start_decoding() returns success with
p == end. The immediately following bare ceph_decode_32(p) then reads
4 bytes past the validated buffer boundary. The garbage value is
passed directly to kzalloc_objs() as the locker count.
The sibling function decode_watchers() in osd_client.c already uses
ceph_decode_32_safe() after its own ceph_start_decoding() call.
decode_lockers() was the only site using the bare variant.
2. ceph_decode_8(p) after the decode_locker() loop has no preceding
bounds check. If an OSD crafts num_lockers such that the loop
advances p exactly to end, the subsequent bare ceph_decode_8(p) reads
one byte past the validated buffer boundary. The result is passed
directly into *type, which is used as a lock type discriminator by
callers, giving an OSD-controlled one-byte OOB read with direct
influence over the lock type field.
Fix both by replacing bare operations with their safe variants:
ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers,
err_inval)
ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type,
err_free_lockers)
The goto targets differ intentionally:
err_inval: is a new label returning -EINVAL directly. It is used for
the pre-allocation failure path where *lockers is not yet allocated
and must not be passed to ceph_free_lockers().
err_free_lockers: is the existing label. It is used for the
post-allocation failure path where *lockers is allocated and must
be freed.
ret is set to -EINVAL before ceph_decode_8_safe() so that
err_free_lockers returns the correct error code on bounds violation.
Without this, err_free_lockers would return a stale ret value (0 from
the successful decode_locker() loop), silently swallowing the error.
-EINVAL is correct for both failure paths. The data received from the
OSD is structurally malformed. -ENOMEM would misrepresent the failure
class to callers and to stable@ backporters triaging error paths.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition).
[ idryomov: trim changelog, formatting ]
Cc: stable@vger.kernel.org Fixes: d4ed4a530562 ("libceph: support for lock.lock_info") Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Bryam Vargas [Fri, 29 May 2026 00:37:24 +0000 (00:37 +0000)]
ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps()
ceph_handle_caps() reads snap_trace_len from the wire-format
ceph_mds_caps header and uses it unconditionally to build a fake
end pointer (snaptrace + snaptrace_len) that is later handed to
ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case:
snaptrace = h + 1;
snaptrace_len = le32_to_cpu(h->snap_trace_len);
p = snaptrace + snaptrace_len;
...
case CEPH_CAP_OP_IMPORT:
if (snaptrace_len) {
...
if (ceph_update_snap_trace(mdsc, snaptrace,
snaptrace + snaptrace_len,
false, &realm)) { ... }
ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm
from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad)
with the attacker-supplied fake end e == snaptrace + snaptrace_len.
With snaptrace_len == 0xFFFFFFFF the bound check is trivially
satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past
the legitimate msg->front buffer, and ri->num_snaps /
ri->num_prior_parent_snaps then drive further out-of-bounds
reads of the encoded snap arrays.
The eleven msg_version >= 2 .. msg_version >= 12 decoder blocks
above the op switch each catch this OOB through their
ceph_decode_*_safe() / ceph_decode_need() helpers, but they sit
behind a hdr.version-gated if, so a malicious or compromised
MDS that sets msg->hdr.version = 1 reaches the IMPORT path with
no version-gated decoder having validated snap_trace_len. The
shape has been present since ceph_handle_caps() was introduced.
Validate snap_trace_len against the message front buffer before
consuming it, using the canonical ceph_decode_need() / ceph_has_room()
helper. The helper bounds the length with subtraction (n <= end - p,
guarded by end >= p) rather than pointer addition, so it is wrap-safe
for the attacker-controlled u32 length on 32-bit builds where
p + snap_trace_len could overflow the address space. This matches the
rest of the ceph decode path (e.g. the pool_ns_len check a few lines
below), and the existing goto bad cleanup already covers this exit
path.
Raphael Zimmer [Fri, 29 May 2026 07:42:57 +0000 (09:42 +0200)]
libceph: Reject monmaps advertising zero monitors
A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a
monitor to the client. This monmap contains information about the
existing monitors in the cluster. Currently, a monmap indicating that
there are zero monitors in the cluster is treated as valid. However, it
is impossible to have zero monitors in the cluster and still receive a
valid monmap from a monitor. Therefore, such a monmap must be corrupted
and should be treated as invalid. Furthermore, a monmap with a monitor
count of zero can subsequently crash the client when attempting to open
a session with a monitor in __open_session(). This happens because the
"BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is
triggered.
This patch extends a check in ceph_monmap_decode() to also reject
arriving mon_maps with num_mon == 0 rather than only with
num_mon > CEPH_MAX_MON.
[ idryomov: drop "log output for unusual values of num_mon" part ]
Douya Le [Fri, 29 May 2026 08:11:44 +0000 (16:11 +0800)]
libceph: reject zero bucket types in crush_decode
CRUSH bucket type 0 is reserved for devices. The mapper relies on
that invariant and uses type 0 to identify leaf devices.
If crush_decode() accepts a bucket with type 0, a malformed CRUSH map
can make the mapper treat a negative bucket ID as a device and pass it
to is_out(), which then indexes the OSD weight array with a negative
value.
Reject zero bucket types while decoding the CRUSH map so the invalid
state never reaches the mapper.
Raphael Zimmer [Wed, 27 May 2026 14:06:17 +0000 (16:06 +0200)]
libceph: Fix multiplication overflow in decode_new_up_state_weight()
If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted
osdmap, out-of-bounds memory accesses may occur in
decode_new_up_state_weight(). This happens because the bounds check for
the new_state part is based on calculating its length depending on a len
value read from the incoming message. This calculation may overflow
leading to an incorrect bounds check. Subsequently, out-of-bounds reads
may occur when decoding this part.
This patch switches the multiplication to use check_mul_overflow() to
abort processing the osdmap if an overflow occurred. Therefore,
osdmaps/messages containing large values for len that result in a
multiplication overflow are treated as invalid.
====================
drop_monitor: take care of 32bit kernels
This series fixes two drop_monitor issues on 32-bit architectures:
- Patch 1 uses nla_total_size_64bit() for PC and TIMESTAMP attributes to
account for alignment padding added by nla_put_u64_64bit(), avoiding
potential skb_over_panic() crashes.
- Patch 2 moves u64_stats updates before spin_unlock_irqrestore(), ensuring
local interrupts are disabled to prevent seqcount corruption from nested
interrupts in probe context.
====================
Eric Dumazet [Wed, 22 Jul 2026 14:17:43 +0000 (14:17 +0000)]
drop_monitor: perform u64_stats updates under IRQ-disabled section
In net_dm_packet_trace_kfree_skb_hit() and net_dm_hw_trap_packet_probe(),
u64_stats_update_begin() / u64_stats_inc() / u64_stats_update_end() were
called after spin_unlock_irqrestore(&...drop_queue.lock, flags), when local
IRQs had already been re-enabled.
Tracepoint probes can execute in IRQ or softirq context. On 32-bit
architectures, u64_stats_update_begin() disables preemption but not interrupts,
relying on seqcount writes. If a nested interrupt occurs on the same CPU during
the 64-bit stats update, the reentrant seqcount update can corrupt the
seqcount state or stats value.
Fix this by performing the 64-bit per-CPU stats update before releasing
drop_queue.lock via spin_unlock_irqrestore(), ensuring local interrupts remain
disabled during the u64_stats update.
Fixes: e9feb58020f9 ("drop_monitor: Expose tail drop counter") Fixes: 5e58109b1ea4 ("drop_monitor: Add support for packet alert mode for hardware drops") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260722141743.3266924-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 22 Jul 2026 14:17:42 +0000 (14:17 +0000)]
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations.
Fixes: ca30707dee2b ("drop_monitor: Add packet alert mode") Fixes: 5e58109b1ea4 ("drop_monitor: Add support for packet alert mode for hardware drops") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260722141743.3266924-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yehyeong Lee [Wed, 22 Jul 2026 12:28:17 +0000 (21:28 +0900)]
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code
the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload
before overwriting it with skb_copy_bits().
skb_put() reserves nla_total_size(payload_len), i.e. the header plus the
NLA_ALIGN() padding, but only payload_len bytes are copied in. When
payload_len is not a multiple of 4 the 1-3 padding bytes are never
initialized and are leaked to user space inside the netlink message.
KMSAN confirms the leak for the software path when the packet payload
length is not 4-byte aligned:
BUG: KMSAN: kernel-infoleak in _copy_to_iter
_copy_to_iter
__skb_datagram_iter
skb_copy_datagram_iter
netlink_recvmsg
sock_recvmsg
__sys_recvfrom
Uninit was created at:
kmem_cache_alloc_node_noprof
__alloc_skb
net_dm_packet_work
Bytes 173-175 of 176 are uninitialized
Use __nla_reserve(), which sets up the attribute header and zeroes the
padding, instead of open coding the attribute construction.
Fixes: ca30707dee2b ("drop_monitor: Add packet alert mode") Fixes: 5e58109b1ea4 ("drop_monitor: Add support for packet alert mode for hardware drops") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr> Link: https://patch.msgid.link/20260722122817.5548-1-yhlee@isslab.korea.ac.kr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 0-day bot managed to find kernel configs that cause build failures,
e.g. when using the StrongARM SA1100 target (ARMv4).
On such legacy ARM architecture, all structures are apparently aligned
to 32 bits, causing build issue here. Indeed, on such architecture,
'flags' size is not equivalent to sizeof(u16) as expected, but to
sizeof(u32).
Instead, use memset(). It was not used before to ensure a simple clear
operation was used by the compiler. But at the end, it shouldn't matter,
and the compiler should optimise this to the same operation with or
without memset() when -O above 0 is used. So let's switch to memset() to
fix this issue, and reduce this complexity.
Fixes: 5e939544f9d2 ("mptcp: fix uninit-value in mptcp_established_options") Cc: stable@vger.kernel.org Suggested-by: Frank Ranner <frank.ranner@intel.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202605312026.Srgsz7Tp-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202607031100.upQfRZTM-lkp@intel.com/ Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260722-net-mptcp-misc-fixes-7-2-rc5-v1-5-6fb595bc86ef@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: mptcp: userspace_pm: fix undefined variable port
In make_connection(), the variable "port" is used but never defined.
This leads to an empty argument being passed to wait_local_port_listen(),
causing "printf: : invalid number" errors:
# INFO: Init
# 01 Created network namespaces ns1, ns2 [ OK ]
# INFO: Make connections
# ./../lib.sh: line 651: printf: : invalid number
# 02 Established IPv4 MPTCP Connection ns2 => ns1 [ OK ]
# INFO: Connection info: 10.0.1.2:59516 -> 10.0.1.1:50002
# ./../lib.sh: line 651: printf: : invalid number
# 03 Established IPv6 MPTCP Connection ns2 => ns1 [ OK ]
Fix it by using the correctly defined variable "app_port", which holds the
appropriate port number for the connection.
Fixes: 39348f5f2f13 ("selftests: mptcp: wait for port instead of sleep") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260722-net-mptcp-misc-fixes-7-2-rc5-v1-4-6fb595bc86ef@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / thirdparty / linux.git / log
