If acpi_get_parent() called in acpi_video_dev_register_backlight()
fails, for example, because acpi_ut_acquire_mutex() fails inside
acpi_get_parent), this can lead to incorrect (uninitialized)
acpi_parent handle being passed to acpi_get_pci_dev() for detecting
the parent pci device.
Check acpi_get_parent() result and set parent device only in case of success.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9661e92c10a9 ("acpi: tie ACPI backlight devices to PCI devices if possible") Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Under heavy load it is likely that the controller is done
with its own task but the thread unlocking the wait is not
scheduled in time. Increasing IFC_TIMEOUT_MSECS allows the
controller to respond within allowable timeslice of 1 sec.
fsl,ifc-nand 7e800000.nand: Controller is not responding
[<804b2047>] (nand_get_device) from [<804b5335>] (nand_write_oob+0x1b/0x4a)
[<804b5335>] (nand_write_oob) from [<804a3585>] (mtd_write+0x41/0x5c)
[<804a3585>] (mtd_write) from [<804c1d47>] (ubi_io_write+0x17f/0x22c)
[<804c1d47>] (ubi_io_write) from [<804c047b>] (ubi_eba_write_leb+0x5b/0x1d0)
Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ronald Monthero <debug.penguin32@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231118083156.776887-1-debug.penguin32@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
ZynqMP GQSPI driver no longer uses spi-master framework. It had been
converted to use spi-mem framework. So remove driver dependency from
spi-master and replace it with spi-mem.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework") Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1699282435-884917-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks.
Fixes: bfd2f0d49aef ("powerpc/powernv: Get rid of old scom_controller abstraction") Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231208085937.107210-1-chentao@kylinos.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
The FPU & VMX preemption tests do not check for errors returned by the
low-level asm routines, preempt_fpu() / preempt_vsx() respectively.
That means any register corruption detected by the asm routines does not
result in a test failure.
Fix it by returning the return value of the asm routines from the
pthread child routines.
Fixes: e5ab8be68e44 ("selftests/powerpc: Test preservation of FPU and VMX regs across preemption") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231128132748.1990179-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is
not set). Fixes these build errors:
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system':
ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data'
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe':
ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver'
Fixes: 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202312010820.cmdwF5X9-lkp@intel.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201055159.8371-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
crtsavres.o is linked to modules. However, as explained in commit d0e628cd817f ("kbuild: doc: clarify the difference between extra-y
and always-y"), 'make modules' does not build extra-y.
For example, the following command fails:
$ make ARCH=powerpc LLVM=1 KBUILD_MODPOST_WARN=1 mrproper ps3_defconfig modules
[snip]
LD [M] arch/powerpc/platforms/cell/spufs/spufs.ko
ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory
make[3]: *** [scripts/Makefile.modfinal:56: arch/powerpc/platforms/cell/spufs/spufs.ko] Error 1
make[2]: *** [Makefile:1844: modules] Error 2
make[1]: *** [/home/masahiro/workspace/linux-kbuild/Makefile:350: __build_one_by_one] Error 2
make: *** [Makefile:234: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Fixes: baa25b571a16 ("powerpc/64: Do not link crtsavres.o in vmlinux") Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231120232332.4100288-1-masahiroy@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch future-proofs the kernel against linker changes that might
put the toc pointer at some location other than .got+0x8000, by
replacing __toc_start+0x8000 with .TOC. throughout. If the kernel's
idea of the toc pointer doesn't agree with the linker, bad things
happen.
prom_init.c code relocating its toc is also changed so that a symbolic
__prom_init_toc_start toc-pointer relative address is calculated
rather than assuming that it is always at toc-pointer - 0x8000. The
length calculations loading values from the toc are also avoided.
It's a little incestuous to do that with unreloc_toc picking up
adjusted values (which is fine in practice, they both adjust by the
same amount if all goes well).
I've also changed the way .got is aligned in vmlinux.lds and
zImage.lds, mostly so that dumping out section info by objdump or
readelf plainly shows the alignment is 256. This linker script
feature was added 2005-09-27, available in FSF binutils releases from
2.17 onwards. Should be safe to use in the kernel, I think.
Finally, put *(.got) before the prom_init.o entry which only needs
*(.toc), so that the GOT header goes in the correct place. I don't
believe this makes any difference for the kernel as it would for
dynamic objects being loaded by ld.so. That change is just to stop
lusers who blindly copy kernel scripts being led astray. Of course,
this change needs the prom_init.c changes.
Some notes on .toc and .got.
.toc is a compiler generated section of addresses. .got is a linker
generated section of addresses, generally built when the linker sees
R_*_*GOT* relocations. In the case of powerpc64 ld.bfd, there are
multiple generated .got sections, one per input object file. So you
can somewhat reasonably write in a linker script an input section
statement like *prom_init.o(.got .toc) to mean "the .got and .toc
section for files matching *prom_init.o". On other architectures that
doesn't make sense, because the linker generally has just one .got
section. Even on powerpc64, note well that the GOT entries for
prom_init.o may be merged with GOT entries from other objects. That
means that if prom_init.o references, say, _end via some GOT
relocation, and some other object also references _end via a GOT
relocation, the GOT entry for _end may be in the range
__prom_init_toc_start to __prom_init_toc_end and if the kernel does
something special to GOT/TOC entries in that range then the value of
_end as seen by objects other than prom_init.o will be affected. On
the other hand the GOT entry for _end may not be in the range
__prom_init_toc_start to __prom_init_toc_end. Which way it turns out
is deterministic but a detail of linker operation that should not be
relied on.
A feature of ld.bfd is that input .toc (and .got) sections matching
one linker input section statement may be sorted, to put entries used
by small-model code first, near the toc base. This is why scripts for
powerpc64 normally use *(.got .toc) rather than *(.got) *(.toc), since
the first form allows more freedom to sort.
Another feature of ld.bfd is that indirect addressing sequences using
the GOT/TOC may be edited by the linker to relative addressing. In
many cases relative addressing would be emitted by gcc for
-mcmodel=medium if you appropriately decorate variable declarations
with non-default visibility.
The original patch is here:
https://lore.kernel.org/linuxppc-dev/20210310034813.GM6042@bubble.grove.modra.org/
Signed-off-by: Alan Modra <amodra@au1.ibm.com>
[aik: removed non-relocatable which is gone in 24d33ac5b8ffb]
[aik: added <=2.24 check]
[aik: because of llvm-as, kernel_toc_addr() uses "mr" instead of global register variable] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-2-aik@ozlabs.ru
Stable-dep-of: 1b1e38002648 ("powerpc: add crtsavres.o to always-y instead of extra-y") Signed-off-by: Sasha Levin <sashal@kernel.org>
.opd section contains function descriptors used to locate
functions in the kernel. If someone is able to modify a
function descriptor he will be able to run arbitrary
kernel function instead of another.
To avoid that, move .opd section inside read-only memory.
Apparently the author of this driver expected strncat() to behave the
way that strlcat() does, which uses the size of the destination buffer
as its third argument rather than the length of the source buffer. The
result is that there is no check on the size of the allocated buffer.
Change it to strlcat().
[ bp: Trim compiler output, fixup commit message. ]
tl;dr: The num_digits() function has a theoretical overflow issue.
But it doesn't affect any actual in-tree users. Fix it by using
a larger type for one of the local variables.
Long version:
There is an overflow in variable m in function num_digits when val
is >= 1410065408 which leads to the digit calculation loop to
iterate more times than required. This results in either more
digits being counted or in some cases (for example where val is 1932683193) the value of m eventually overflows to zero and the
while loop spins forever).
Currently the function num_digits is currently only being used for
small values of val in the SMP boot stage for digit counting on the
number of cpus and NUMA nodes, so the overflow is never encountered.
However it is useful to fix the overflow issue in case the function
is used for other purposes in the future. (The issue was discovered
while investigating the digit counting performance in various
kernel helper functions rather than any real-world use-case).
The simplest fix is to make m a long long, the overhead in
multiplication speed for a long long is very minor for small values
of val less than 10000 on modern processors. The alternative
fix is to replace the multiplication with a constant division
by 10 loop (this compiles down to an multiplication and shift)
without needing to make m a long long, but this is slightly slower
than the fix in this commit when measured on a range of x86
processors).
[ dhansen: subject and changelog tweaks ]
Fixes: 646e29a1789a ("x86: Improve the printout of the SMP bootup CPU table") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20231102174901.2590325-1-colin.i.king%40gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
CCITMIN is a 12 bit field and doesn't fit in a u8, so extend it to u16.
This probably wasn't an issue previously because values higher than 255
never occurred.
But since commit 4aff040bcc8d ("coresight: etm: Override TRCIDR3.CCITMIN
on errata affected cpus"), a comparison with 256 was done to enable the
errata, generating the following W=1 build error:
coresight-etm4x-core.c:1188:24: error: result of comparison of
constant 256 with expression of type 'u8' (aka 'unsigned char') is
always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (drvdata->ccitmin == 256)
Cc: stable@vger.kernel.org Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310302043.as36UFED-lkp@intel.com/ Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20231101115206.70810-1-james.clark@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ttyname buffer for the ledtrig_tty_data struct is allocated in the
sysfs ttyname_store() function. This buffer must be released on trigger
deactivation. This was missing and is thus a memory leak.
While we are at it, the TTY handler in the ledtrig_tty_data struct should
also be returned in case of the trigger deactivation call.
Add device IDs for the Brainboxes UC-203, UC-257, UC-414, UC-475,
IS-300/IS-500 and PX-263/PX-295 and define the relevant "geometry"
for the cards.
This patch requires part 1 of this series.
In the core-1 uio_unregister_device(), the device_unregister will kfree
idev when the idev->dev kobject ref is 1. But after core-1
device_unregister, put_device and before doing kfree, the core-2 may
get_device. Then:
1. After core-1 kfree idev, the core-2 will do use-after-free for idev.
2. When core-2 do uio_release and put_device, the idev will be double
freed.
To address this issue, we can get idev atomic & inc idev reference with
minor_lock.
Fixes: 57c5f4df0a5a ("uio: fix crash after the device is unregistered") Cc: stable <stable@kernel.org> Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/1703152663-59949-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mmap read lock is used during the shrinker's callback, which means
that using alloc->vma pointer isn't safe as it can race with munmap().
As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in
munmap") the mmap lock is downgraded after the vma has been isolated.
I was able to reproduce this issue by manually adding some delays and
triggering page reclaiming through the shrinker's debug sysfs. The
following KASAN report confirms the UAF:
==================================================================
BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8
Read of size 8 at addr ffff356ed50e50f0 by task bash/478
Freed by task 491:
kmem_cache_free+0x17c/0x3c8
vm_area_free_rcu_cb+0x74/0x98
rcu_core+0xa38/0x26d4
rcu_core_si+0x10/0x1c
__do_softirq+0x2fc/0xd24
Last potentially related work creation:
__call_rcu_common.constprop.0+0x6c/0xba0
call_rcu+0x10/0x1c
vm_area_free+0x18/0x24
remove_vma+0xe4/0x118
do_vmi_align_munmap.isra.0+0x718/0xb5c
do_vmi_munmap+0xdc/0x1fc
__vm_munmap+0x10c/0x278
__arm64_sys_munmap+0x58/0x7c
Fix this issue by performing instead a vma_lookup() which will fail to
find the vma that was isolated before the mmap lock downgrade. Note that
this option has better performance than upgrading to a mmap write lock
which would increase contention. Plus, mmap_write_trylock() has been
recently removed anyway.
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Cc: stable@vger.kernel.org Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20231201172212.1813387-3-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use EPOLLERR instead of POLLERR to make sure it is cast to the correct
__poll_t type. This fixes the following sparse issue:
drivers/android/binder.c:5030:24: warning: incorrect type in return expression (different base types)
drivers/android/binder.c:5030:24: expected restricted __poll_t
drivers/android/binder.c:5030:24: got int
Fixes: f88982679f54 ("binder: check for binder_thread allocation failure in binder_poll()") Cc: stable@vger.kernel.org Cc: Eric Biggers <ebiggers@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20231201172212.1813387-2-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That commit introduced the following race and can cause system hung.
md_write_start: raid5d:
// mddev->in_sync == 1
set "MD_SB_CHANGE_PENDING"
// running before md_write_start wakeup it
waiting "MD_SB_CHANGE_PENDING" cleared
>>>>>>>>> hung
wakeup mddev->thread
...
waiting "MD_SB_CHANGE_PENDING" cleared
>>>> hung, raid5d should clear this flag
but get hung by same flag.
The issue reverted commit fixing is fixed by last patch in a new way.
Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since forcibly unoptimized kprobes will be put on the freeing_list directly
in the unoptimize_kprobe(), do_unoptimize_kprobes() must continue to check
the freeing_list even if unoptimizing_list is empty.
This bug can happen if a kprobe is put in an instruction which is in the
middle of the jump-replaced instruction sequence of an optprobe, *and* the
optprobe is recently unregistered and queued on unoptimizing_list.
In this case, the optprobe will be unoptimized forcibly (means immediately)
and put it into the freeing_list, expecting the optprobe will be handled in
do_unoptimize_kprobe().
But if there is no other optprobes on the unoptimizing_list, current code
returns from the do_unoptimize_kprobe() soon and does not handle the
optprobe which is on the freeing_list. Then the optprobe will hit the
WARN_ON_ONCE() in the do_free_cleaned_kprobes(), because it is not handled
in the latter loop of the do_unoptimize_kprobe().
To solve this issue, do not return from do_unoptimize_kprobes() immediately
even if unoptimizing_list is empty.
Moreover, this change affects another case. kill_optimized_kprobes() expects
kprobe_optimizer() will just free the optprobe on freeing_list.
So I changed it to just do list_move() to freeing_list if optprobes are on
unoptimizing list. And the do_unoptimize_kprobe() will skip
arch_disarm_kprobe() if the probe on freeing_list has gone flag.
v1.25 of pahole supports filtering out functions with multiple inconsistent
function prototypes or optimized-out parameters from the BTF representation.
These present problems because there is no additional info in BTF saying which
inconsistent prototype matches which function instance to help guide attachment,
and functions with optimized-out parameters can lead to incorrect assumptions
about register contents.
So for now, filter out such functions while adding BTF representations for
functions that have "."-suffixes (foo.isra.0) but not optimized-out parameters.
This patch assumes that below linked changes land in pahole for v1.25.
Issues with pahole filtering being too aggressive in removing functions
appear to be resolved now, but CI and further testing will confirm.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230510130241.1696561-1-alan.maguire@oracle.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ small context conflict because of not backported --lang_exclude=rust
option, which is not needed in 5.15 ] Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TongFang GMxXGxx, which needs IRQ overriding for the keyboard to work,
is also sold as the Eluktronics RP-15 which does not use the standard
TongFang GMxXGxx DMI board_name.
Add an entry for this laptop to the irq1_edge_low_force_override[] DMI
table to make the internal keyboard functional.
Reported-by: Luis Acuna <ldacuna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3823119b9c2b ("drm/crtc: Fix uninit-value bug in
drm_mode_setcrtc") was supposed to fix use of an uninitialized variable,
but introduced another.
num_connectors is only initialized if crtc_req->count_connectors > 0,
but it's used regardless. Fix it.
Fixes: 3823119b9c2b ("drm/crtc: Fix uninit-value bug in drm_mode_setcrtc") Cc: syzbot+4fad2e57beb6397ab2fc@syzkaller.appspotmail.com Cc: Ziqi Zhao <astrajoan@yahoo.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231208131238.2924571-1-jani.nikula@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_property_match_string returns an int; either an index from 0 or
greater if successful or negative on failure. Even it's very
unlikely that the DT CPU node contains multiple enable-methods
these checks should be fixed.
This patch was inspired by the work of Nick Desaulniers.
When a 'DEL_CLIENT' message is received from the remote, the corresponding
server port gets deleted. A DEL_SERVER message is then announced for this
server. As part of handling the subsequent DEL_SERVER message, the name-
server attempts to delete the server port which results in a '-ENOENT' error.
The return value from server_del() is then propagated back to qrtr_ns_worker,
causing excessive error prints.
To address this, return 0 from control_cmd_del_server() without checking the
return value of server_del(), since the above scenario is not an error case
and hence server_del() doesn't have any other error return value.
Signed-off-by: Sarannya Sasikumar <quic_sarannya@quicinc.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The IDA usually detects double-frees, but that detection failed to
consider the case when there are no nearby IDs allocated and so we have a
NULL bitmap rather than simply having a clear bit. Add some tests to the
test-suite to be sure we don't inadvertently reintroduce this problem.
Unfortunately they're quite noisy so include a message to disregard
the warnings.
Reported-by: Zhenghan Wang <wzhmmmmm@gmail.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20231217213221.49424-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It possible that while the rx rb is being handled, the transport has
been stopped and re-started. In this case the tx queue pointer is not
yet initialized, which will lead to a NULL pointer dereference.
Fix it.
After the laptop lid is opened, and the device resumes from S3 deep
sleep, if the user presses a keyboard key while the screen is still black,
the mouse and keyboard become unusable.
Enabling this quirk prevents this behavior from occurring.
There have been multiple reports of keyboard issues on recent laptop models
which can be worked around by setting i8042.dumbkbd, with the downside
being this breaks the capslock LED.
It seems that these issues are caused by recent laptops getting confused by
ATKBD_CMD_GETID. Rather then adding and endless growing list of quirks for
this, just skip ATKBD_CMD_GETID alltogether on laptops in translated mode.
The main goal of sending ATKBD_CMD_GETID is to skip binding to ps/2
mice/touchpads and those are never used in translated mode.
Examples of laptop models which benefit from skipping ATKBD_CMD_GETID:
* "HP Laptop 15s-fq2xxx", "HP laptop 15s-fq4xxx" and "HP Laptop 15-dy2xxx"
models the kbd stops working for the first 2 - 5 minutes after boot
(waiting for EC watchdog reset?)
* On "HP Spectre x360 13-aw2xxx" atkbd fails to probe the keyboard
* At least 9 different Lenovo models have issues with ATKBD_CMD_GETID, see:
https://github.com/yescallop/atkbd-nogetid
This has been tested on:
1. A MSI B550M PRO-VDH WIFI desktop, where the i8042 controller is not
in translated mode when no keyboard is plugged in and with a ps/2 kbd
a "AT Translated Set 2 keyboard" /dev/input/event# node shows up
2. A Lenovo ThinkPad X1 Yoga gen 8 (always has a translated set 2 keyboard)
As the ring buffer recording requires cmpxchg() to work, if the
architecture does not support cmpxchg in NMI, then do not do any recording
within an NMI.
KASAN report following issue. The root cause is when opening 'hist'
file of an instance and accessing 'trace_event_file' in hist_show(),
but 'trace_event_file' has been freed due to the instance being removed.
'hist_debug' file has the same problem. To fix it, call
tracing_{open,release}_file_tr() in file_operations callback to have
the ref count and avoid 'trace_event_file' being freed.
BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278
Read of size 8 at addr ffff242541e336b8 by task head/190
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If for some reason the trace_marker write does not have a nul byte for the
string, it will overflow the print:
trace_seq_printf(s, ": %s", field->buf);
The field->buf could be missing the nul byte. To prevent overflow, add the
max size that the buf can be by using the event size and the field
location.
int max = iter->ent_size - offsetof(struct print_entry, buf);
Analyzed informations from vmcore as follows:
(1) There are about 5k+ jbd2_inode in 'commit_transaction->t_inode_list';
(2) Now is processing the 855th jbd2_inode;
(3) JBD2 task has TIF_NEED_RESCHED flag;
(4) There's no pags in address_space around the 855th jbd2_inode;
(5) There are some process is doing drop caches;
(6) Mounted with 'nodioread_nolock' option;
(7) 128 CPUs;
According to informations from vmcore we know 'journal->j_list_lock' spin lock
competition is fierce. So journal_finish_inode_data_buffers() maybe process
slowly. Theoretically, there is scheduling point in the filemap_fdatawait_range_keep_errors().
However, if inode's address_space has no pages which taged with PAGECACHE_TAG_WRITEBACK,
will not call cond_resched(). So may lead to soft lockup.
journal_finish_inode_data_buffers
filemap_fdatawait_range_keep_errors
__filemap_fdatawait_range
while (index <= end)
nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end, PAGECACHE_TAG_WRITEBACK);
if (!nr_pages)
break; --> If 'nr_pages' is equal zero will break, then will not call cond_resched()
for (i = 0; i < nr_pages; i++)
wait_on_page_writeback(page);
cond_resched();
To solve above issue, add scheduling point in the journal_finish_inode_data_buffers();
We are seeing cases where neigh_cleanup_and_release() is called by
neigh_forced_gc() many times in a row with preemption turned off.
When running on a low powered CPU at a low CPU frequency, this has
been measured to keep preemption off for ~10 ms. That's not great on a
system with HZ=1000 which expects tasks to be able to schedule in
with ~1ms latency.
Suggested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The connector_set contains uninitialized values when allocated with
kmalloc_array. However, in the "out" branch, the logic assumes that any
element in connector_set would be equal to NULL if failed to
initialize, which causes the bug reported by Syzbot. The fix is to use
an extra variable to keep track of how many connectors are initialized
indeed, and use that variable to decrease any refcounts in the "out"
branch.
It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.
Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
but the tester did not provide a Tested-by: tag] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a wrong error checking in exynos_drm_dma.c module.
In the exynos_drm_register_dma function, both arm_iommu_create_mapping()
and iommu_get_domain_for_dev() functions are expected to return NULL as
an error.
However, the error checking is performed using the statement
if(IS_ERR(mapping)), which doesn't provide a suitable error value.
So check if 'mapping' is NULL, and if it is, return -ENODEV.
Smatch reports the warning below:
drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind()
error: 'crtc' dereferencing possible ERR_PTR()
The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV),
which can not be used directly. Fix this by checking the return value
before using it.
The controller state is typically written by another CPU, so reading it
should ensure no optimizations are taken. This is a repeated pattern in
the driver, so start with adding a convenience function that returns the
controller state with READ_ONCE().
Volume can have ranges that start with negative values, ex: -84dB to
+40dB. Apply correct range check in snd_soc_limit_volume before setting
the platform_max. Without this patch, for example setting a 0dB limit on
a volume range of -84dB to +40dB would fail.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When an EEH error is encountered by a PCI adapter, the EEH driver
modifies the PCI channel's state as shown below:
enum {
/* I/O channel is in normal state */
pci_channel_io_normal = (__force pci_channel_state_t) 1,
/* I/O to channel is blocked */
pci_channel_io_frozen = (__force pci_channel_state_t) 2,
/* PCI card is dead */
pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
};
If the same EEH error then causes the tg3 driver's transmit timeout
logic to execute, the tg3_tx_timeout() function schedules a reset
task via tg3_reset_task_schedule(), which may cause a race condition
between the tg3 and EEH driver as both attempt to recover the HW via
a reset action.
EEH driver gets error event
--> eeh_set_channel_state()
and set device to one of
error state above scheduler: tg3_reset_task() get
returned error from tg3_init_hw()
--> dev_close() shuts down the interface
tg3_io_slot_reset() and
tg3_io_resume() fail to
reset/resume the device
To resolve this issue, we avoid the race condition by checking the PCI
channel state in the tg3_reset_task() function and skip the tg3 driver
initiated reset when the PCI channel is not in the normal state. (The
driver has no access to tg3 device registers at this point and cannot
even complete the reset task successfully without external assistance.)
We'll leave the reset procedure to be managed by the EEH driver which
calls the tg3_io_error_detected(), tg3_io_slot_reset() and
tg3_io_resume() functions as appropriate.
Adding the same checking in tg3_dump_state() to avoid dumping all
device registers when the PCI channel is not in the normal state.
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com> Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com> Reviewed-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is a hack around a bug exposed with the GSP code, I'm not sure
what is happening exactly, but it appears some of our flushes don't
result in proper tlb invalidation for out BAR2 and we get a BAR2
fault from GSP and it all dies.
skl_platform_register() uses krealloc. When krealloc is fail,
then previous memory is not freed. The leak is also when soc
component registration failed.
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:
sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment
sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short
sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/ Signed-off-by: David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bit 6 of INPPGA (INPPGAMUTE) does not control the Aux path, it controls
the input PGA path, as can been seen from Figure 8 Input Boost Stage in
the datasheet. Update the naming of things in the driver to match this
and update the routing to also reflect this.
The block layer doesn't support logical block sizes smaller than 512
bytes. The nvme spec doesn't support that small either, but the driver
isn't checking to make sure the device responded with usable data.
Failing to catch this will result in a kernel bug, either from a
division by zero when stacking, or a zero length bio.
For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init
'didt_rreg' and 'didt_wreg' to 'NULL'. But in func
'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT'
lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use
these two definitions won't be added for 'AMDGPU_FAMILY_SI'.
So, add null pointer judgment before calling.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lu Yao <yaolu@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
debugfs_create_automount() stores a function pointer in d_fsdata,
but since commit 7c8d469877b1 ("debugfs: add support for more
elaborate ->d_fsdata") debugfs_release_dentry() will free it, now
conditionally on DEBUGFS_FSDATA_IS_REAL_FOPS_BIT, but that's not
set for the function pointer in automount. As a result, removing
an automount dentry would attempt to free the function pointer.
Luckily, the only user of this (tracing) never removes it.
Nevertheless, it's safer if we just handle the fsdata in one way,
namely either DEBUGFS_FSDATA_IS_REAL_FOPS_BIT or allocated. Thus,
change the automount to allocate it, and use the real_fops in the
data to indicate whether or not automount is filled, rather than
adding a type tag. At least for now this isn't actually needed,
but the next changes will require it.
Also check in debugfs_file_get() that it gets only called
on regular files, just to make things clearer.
Added initialization use_ack to mptcp_parse_option().
Reported-by: syzbot+b834a6b2decad004cfa1@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS appears to define a RST symbol at a high level, which clashes
with some register naming in the driver. Since there is currently
no case for running this driver on MIPS devices simply cut off the
build of this driver on MIPS.
We need more space to save WoL context. So lets allocate memory
for ax88179_data instead of using struct usbnet data field which
only supports 5 words. We continue to use the struct usbnet data
field for multicast filters. However since we no longer have the
private data stored there, we can shift it to the beginning.
Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Jeffery Miller <jefferymiller@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recent changes to count number of matching symbols when creating
a kprobe event failed to take into account kernel modules. As such, it
breaks kprobes on kernel module symbols, by assuming there is no match.
Fix this my calling module_kallsyms_on_each_symbol() in addition to
kallsyms_on_each_match_symbol() to perform a proper counting.
Link: https://lore.kernel.org/all/20231027233126.2073148-1-andrii@kernel.org/ Cc: Francis Laniel <flaniel@linux.microsoft.com> Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Fixes: b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Markus Boehme <markubo@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Making module_kallsyms_on_each_symbol generally available, so it
can be used outside CONFIG_LIVEPATCH option in following changes.
Rather than adding another ifdef option let's make the function
generally available (when CONFIG_KALLSYMS and CONFIG_MODULES
options are defined).
Cc: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20221025134148.3300700-2-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 926fe783c8a6 ("tracing/kprobes: Fix symbol counting logic by looking at modules as well") Signed-off-by: Markus Boehme <markubo@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An nftables family is merely a hollow container, its family just a
number and such not reliant on compile-time options other than nftables
support itself. Add an artificial check so attempts at using a family
the kernel can't support fail as early as possible. This helps user
space detect kernels which lack e.g. NFPROTO_INET.
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a program header was added, it moved the text section but
GEN_ELF_TEXT_OFFSET was not updated.
Fix by adding the program header size and aligning.
Fixes: babd04386b1df8c3 ("perf jit: Include program header in ELF files") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Lieven Hey <lieven.hey@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[namhyung: use "linux/kernel.h" instead to avoid build failure] Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sending Ipv6 packets in a loop via a raw socket triggers an issue where a
route is cloned by ip6_rt_cache_alloc() for each packet sent. This quickly
consumes the Ipv6 max_size threshold which defaults to 4096 resulting in
these warnings:
Implement David Aherns suggestion to remove max_size check seeing that Ipv6
has a GC to manage memory usage. Ipv4 already does not check max_size.
Here are some memory comparisons for Ipv4 vs Ipv6 with the patch:
Test by running 5 instances of a program that sends UDP packets to a raw
socket 5000000 times. Compare Ipv4 and Ipv6 performance with a similar
program.
/*
* After this, the interrupt handler may be invoked at any time
*
* tmio_mmc_irq()
* {
* __tmio_mmc_card_detect_irq()
* mmc_detect_change()
* _mmc_detect_change()
* mmc_schedule_delayed_work(&host->detect, delay);
* }
*/
When expire_timers() runs later, it warns because the MMC host structure
containing the delayed work was freed, and now contains an invalid work
function pointer.
Fix this by cancelling any pending delayed work before releasing the
MMC host structure.
When RPMB was converted to a character device, it added support for
multiple RPMB partitions (Commit 97548575bef3 ("mmc: block: Convert RPMB to
a character device").
One of the changes in this commit was transforming the variable target_part
defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed
the validation check done in mmc_blk_part_switch_pre() and
mmc_blk_part_switch_post(), so let's fix it.
Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device") Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending
HS CMD13") set HS clock (52MHz) before switching to HS mode. For this
freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9).
Then we set rx_clk_phase to 11 or 15 which is out of range and make
hardware frozen. After we send command request, no irq will be
interrupted and the mmc driver will keep to wait for request finished,
even durning rebooting.
So let's set it to Phase 90 which should work in most cases. Then let
meson_mx_sdhc_execute_tuning() to find the accurate value for data
transfer.
If this doesn't work, maybe need to define a factor in dts.
The bug happens when highest bit of holebegin is 1, suppose holebegin is
0x8000000111111000, after shift, hba would be 0xfff8000000111111, then
vma_interval_tree_foreach would look it up fail or leads to the wrong
result.
here pgoff is correctly shifted to 0x8000000111111,
but pass 0x8000000111111000 as holebegin to unmap
would then cause terrible result, as shown below:
The issue happens in Heterogeneous computing, where the device(e.g.
gpu) and host share the same virtual address space.
A simple workflow pattern which hit the issue is:
/* host */
1. userspace first mmap a file backed VA range with specified offset.
e.g. (offset=0x800..., mmap return: va_a)
2. write some data to the corresponding sys page
e.g. (va_a = 0xAABB)
/* device */
3. gpu workload touches VA, triggers gpu fault and notify the host.
/* host */
4. reviced gpu fault notification, then it will:
4.1 unmap host pages and also takes care of cpu tlb
(use unmap_mapping_range with offset=0x800...)
4.2 migrate sys page to device
4.3 setup device page table and resolve device fault.
/* device */
5. gpu workload continued, it accessed va_a and got 0xAABB.
6. gpu workload continued, it wrote 0xBBCC to va_a.
/* host */
7. userspace access va_a, as expected, it will:
7.1 trigger cpu vm fault.
7.2 driver handling fault to migrate gpu local page to host.
8. userspace then could correctly get 0xBBCC from va_a
9. done
But in step 4.1, if we hit the bug this patch mentioned, then userspace
would never trigger cpu fault, and still get the old value: 0xAABB.
Since commit aa49c90894d0 ("i2c: core: Run atomic i2c xfer when
!preemptible"), the whole reboot/power off sequence on non-preempt kernels
is using atomic i2c xfer, as !preemptible() always results to 1.
During device_shutdown(), the i2c might be used a lot and not all busses
have implemented an atomic xfer handler. This results in a lot of
avoidable noise, like:
[ 12.687169] No atomic I2C transfer handler for 'i2c-0'
[ 12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118
...
Fix this by allowing non-atomic xfer when the interrupts are enabled, as
it was before.
kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate
indirect calls. However, int3_emulate_call always assumes the size of
the call to be 5 bytes when calculating the return address. This is
incorrect for register-based indirect calls in x86, which can be either
2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime,
the incorrect return address causes control flow to land onto the wrong
place after return -- possibly not a valid instruction boundary. This
can lead to a panic like the following:
The emulation incorrectly sets the return address to be ffffffff8102ed9d
+ 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next
mov. This in turn causes incorrect subsequent instruction decoding and
eventually triggers the page fault above.
Instead of invoking int3_emulate_call, perform push and jmp emulation
directly in kprobe_emulate_call_indirect. At this point we can obtain
the instruction size from p->ainsn.size so that we can calculate the
correct return address.
Link: https://lore.kernel.org/all/20240102233345.385475-1-jinghao7@illinois.edu/ Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Cc: stable@vger.kernel.org Signed-off-by: Jinghao Jia <jinghao7@illinois.edu> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VIA VT6306/6307/6308 provides PCI interface compliant to 1394 OHCI. When
the hardware is combined with Asmedia ASM1083/1085 PCIe-to-PCI bus bridge,
it appears that accesses to its 'Isochronous Cycle Timer' register (offset
0xf0 on PCI memory space) often causes unexpected system reboot in any
type of AMD Ryzen machine (both 0x17 and 0x19 families). It does not
appears in the other type of machine (AMD pre-Ryzen machine, Intel
machine, at least), or in the other OHCI 1394 hardware (e.g. Texas
Instruments).
The issue explicitly appears at a commit dcadfd7f7c74 ("firewire: core:
use union for callback of transaction completion") added to v6.5 kernel.
It changed 1394 OHCI driver to access to the register every time to
dispatch local asynchronous transaction. However, the issue exists in
older version of kernel as long as it runs in AMD Ryzen machine, since
the access to the register is required to maintain bus time. It is not
hard to imagine that users experience the unexpected system reboot when
generating bus reset by plugging any devices in, or reading the register
by time-aware application programs; e.g. audio sample processing.
This commit suppresses the unexpected system reboot in the combination of
hardware. It avoids the access itself. As a result, the software stack can
not provide the hardware time anymore to unit drivers, userspace
applications, and nodes in the same IEEE 1394 bus. It brings apparent
disadvantage since time-aware application programs require it, while
time-unaware applications are available again; e.g. sbp2.
A process may map only some of the pages in a folio, and might be missed
if it maps the poisoned page but not the head page. Or it might be
unnecessarily hit if it maps the head page, but not the poisoned page.
Link: https://lkml.kernel.org/r/20231218135837.3310403-3-willy@infradead.org Fixes: 7af446a841a2 ("HWPOISON, hugetlb: enable error handling path for hugepage") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "locked-in-memory size" limit per process can be non-multiple of
page_size. The mmap() fails if we try to allocate locked-in-memory with
same size as the allowed limit if it isn't multiple of the page_size
because mmap() rounds off the memory size to be allocated to next multiple
of page_size.
Fix this by flooring the length to be allocated with mmap() to the
previous multiple of the page_size.
This was getting triggered on KernelCI regularly because of different
ulimit settings which wasn't multiple of the page_size. Find logs
here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
The bug in was present from the time test was first added.
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. However, it was never implemented in
__sock_cmsg_send thus breaking SO_TIMESTAMPING cmsg for platforms using
SO_TIMESTAMPING_NEW.
projects / thirdparty / kernel / stable.git / log
