With `two-primaries` enabled, DRBD tries to detect "concurrent" writes
and handle write conflicts, so that even if you write to the same sector
simultaneously on both nodes, they end up with the identical data once
the writes are completed.
In handling "superseeded" writes, we forgot a kref_get,
resulting in a premature drbd_destroy_device and use after free,
and further to kernel crashes with symptoms.
Relevance: No one should use DRBD as a random data generator, and apparently
all users of "two-primaries" handle concurrent writes correctly on layer up.
That is cluster file systems use some distributed lock manager,
and live migration in virtualization environments stops writes on one node
before starting writes on the other node.
Which means that other than for "test cases",
this code path is never taken in real life.
FYI, in DRBD 9, things are handled differently nowadays. We still detect
"write conflicts", but no longer try to be smart about them.
We decided to disconnect hard instead: upper layers must not submit concurrent
writes. If they do, that's their fault.
Signed-off-by: Sarah Newman <srn@prgmr.com> Signed-off-by: Lars Ellenberg <lars@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20250627095728.800688-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Verify that number of partition maps isn't insanely high which can lead
to large allocation in udf_sb_alloc_partition_maps(). All partition maps
have to fit in the LVD which is in a single block.
Reported-by: syzbot+478f2c1a6f0f447a46bb@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzbot came up with a reproducer where a loop device block size is
changed underneath a mounted filesystem. This causes a mismatch between
the block device block size and the block size stored in the superblock
causing confusion in various places such as fs/buffer.c. The particular
issue triggered by syzbot was a warning in __getblk_slow() due to
requested buffer size not matching block device block size.
Fix the problem by getting exclusive hold of the loop device to change
its block size. This fails if somebody (such as filesystem) has already
an exclusive ownership of the block device and thus prevents modifying
the loop device under some exclusive owner which doesn't expect it.
Reported-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20250711163202.19623-2-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Clears up the warning added in 7ee3647243e5 ("migrate: Remove call to
->writepage") that occurs in various xfstests, causing "something found
in dmesg" failures.
[ 341.136573] gfs2_meta_aops does not implement migrate_folio
[ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300
Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A fuzzer test introduced corruption that ends up with a depth of 0 in
dir_e_read(), causing an undefined shift by 32 at:
index = hash >> (32 - dip->i_depth);
As calculated in an open-coded way in dir_make_exhash(), the minimum
depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is
invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time.
So we can avoid the undefined behaviour by checking for depth values
lower than the minimum in gfs2_dinode_in(). Values greater than the
maximum are already being checked for there.
Also switch the calculation in dir_make_exhash() to use ilog2() to
clarify how the depth is calculated.
Tested with the syzkaller repro.c and xfstests '-g quick'.
Reported-by: syzbot+4708579bb230a0582a57@syzkaller.appspotmail.com Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Update the nvme_tcp_start_tls() function to use dev_err() instead of
dev_dbg() when a TLS error is detected. This ensures that handshake
failures are visible by default, aiding in debugging.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Same as done for raid0, set chunk_sectors limit to appropriately set the
atomic write size limit.
Setting chunk_sectors limit in this way overrides the stacked limit
already calculated based on the bottom device limits. This is ok, as
when any bios are sent to the bottom devices, the block layer will still
respect the bottom device chunk_sectors.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20250711105258.3135198-6-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
NVMe devices from multiple vendors appear to get stuck in a reset state
that we can't get out of with an NVMe level Controller Reset. The kernel
would report these with messages that look like:
Device not ready; aborting reset, CSTS=0x1
These have historically required a power cycle to make them usable
again, but in many cases, a PCIe FLR is sufficient to restart operation
without a power cycle. Try it if the initial controller reset fails
during any nvme reset attempt.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
If smb2_create_link() is called with ReplaceIfExists set and the name
does exist then a deadlock will happen.
ksmbd_vfs_kern_path_locked() will return with success and the parent
directory will be locked. ksmbd_vfs_remove_file() will then remove the
file. ksmbd_vfs_link() will then be called while the parent is still
locked. It will try to lock the same parent and will deadlock.
This patch moves the ksmbd_vfs_kern_path_unlock() call to *before*
ksmbd_vfs_link() and then simplifies the code, removing the file_present
flag variable.
Signed-off-by: NeilBrown <neil@brown.name> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we attempt a mmap write into a NOCOW file or a prealloc extent when
there is no more available data space (or unallocated space to allocate a
new data block group) and we can do a NOCOW write (there are no reflinks
for the target extent or snapshots), we always fail due to -ENOSPC, unlike
for the regular buffered write and direct IO paths where we check that we
can do a NOCOW write in case we can't reserve data space.
touch $MNT/foobar
# Make it a NOCOW file.
chattr +C $MNT/foobar
# Add initial data to file.
xfs_io -c "pwrite -S 0xab 0 1M" $MNT/foobar
# Fill all the remaining data space and unallocated space with data.
dd if=/dev/zero of=$MNT/filler bs=4K &> /dev/null
# Overwrite the file with a mmap write. Should succeed.
xfs_io -c "mmap -w 0 1M" \
-c "mwrite -S 0xcd 0 1M" \
-c "munmap" \
$MNT/foobar
# Unmount, mount again and verify the new data was persisted.
umount $MNT
mount $DEV $MNT
od -A d -t x1 $MNT/foobar
umount $MNT
Running this:
$ ./test.sh
(...)
wrote 1048576/1048576 bytes at offset 0
1 MiB, 256 ops; 0.0008 sec (1.188 GiB/sec and 311435.5231 ops/sec)
./test.sh: line 24: 234865 Bus error xfs_io -c "mmap -w 0 1M" -c "mwrite -S 0xcd 0 1M" -c "munmap" $MNT/foobar 0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
* 1048576
Fix this by not failing in case we can't allocate data space and we can
NOCOW into the target extent - reserving only metadata space in this case.
After this change the test passes:
$ ./test.sh
(...)
wrote 1048576/1048576 bytes at offset 0
1 MiB, 256 ops; 0.0007 sec (1.262 GiB/sec and 330749.3540 ops/sec) 0000000 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd
* 1048576
A test case for fstests will be added soon.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Linux IMA (Integrity Measurement Architecture) subsystem used for
secure boot, file integrity, or remote attestation cannot be a loadable
module for few reasons listed below:
o Boot-Time Integrity: IMA’s main role is to measure and appraise files
before they are used. This includes measuring critical system files during
early boot (e.g., init, init scripts, login binaries). If IMA were a
module, it would be loaded too late to cover those.
o TPM Dependency: IMA integrates tightly with the TPM to record
measurements into PCRs. The TPM must be initialized early (ideally before
init_ima()), which aligns with IMA being built-in.
o Security Model: IMA is part of a Trusted Computing Base (TCB). Making it
a module would weaken the security model, as a potentially compromised
system could delay or tamper with its initialization.
IMA must be built-in to ensure it starts measuring from the earliest
possible point in boot which inturn implies TPM must be initialised and
ready to use before IMA.
To enable integration of tpm_event_log with the IMA subsystem, the TPM
drivers (tpm_crb and tpm_crb_ffa) also needs to be built-in. However with
FF-A driver also being initialised at device initcall level, it can lead to
an initialization order issue where:
- crb_acpi_driver_init() may run before tpm_crb_ffa_driver()_init and
ffa_init()
- As a result, probing the TPM device via CRB over FFA is deferred
- ima_init() (called as a late initcall) runs before deferred probe
completes, IMA fails to find the TPM and logs the below error:
| ima: No TPM chip found, activating TPM-bypass!
Eventually it fails to generate boot_aggregate with PCR values.
Because of the above stated dependency, the ffa driver needs to initialised
before tpm_crb_ffa module to ensure IMA finds the TPM successfully when
present.
[ jarkko: reformatted some of the paragraphs because they were going past
the 75 character boundary. ]
To generate the boot_aggregate log in the IMA subsystem using TPM PCR
values, the TPM driver must be built as built-in and must be probed
before the IMA subsystem is initialized.
However, when the TPM device operates over the FF-A protocol using the
CRB interface, probing fails and returns -EPROBE_DEFER if the
tpm_crb_ffa device — an FF-A device that provides the communication
interface to the tpm_crb driver — has not yet been probed.
This issue occurs because both crb_acpi_driver_init() and
tpm_crb_ffa_driver_init() are registered with device_initcall. As a
result, crb_acpi_driver_init() may be invoked before
tpm_crb_ffa_driver_init(), which is responsible for probing the
tpm_crb_ffa device.
When this happens, IMA fails to detect the TPM device and logs the
following message:
| ima: No TPM chip found, activating TPM-bypass!
Consequently, it cannot generate the boot_aggregate log with the PCR
values provided by the TPM.
To resolve this issue, the tpm_crb_ffa_init() function explicitly
attempts to probe the tpm_crb_ffa by register tpm_crb_ffa driver so that
when tpm_crb_ffa device is created before tpm_crb_ffa_init(), probe the
tpm_crb_ffa device in tpm_crb_ffa_init() to finish probe the TPM device
completely.
This ensures that the TPM device using CRB over FF-A can be successfully
probed, even if crb_acpi_driver_init() is called first.
[ jarkko: reformatted some of the paragraphs because they were going past
the 75 character boundary. ]
The current implementation of timeout detection works in the following
way:
1. Read completion status. If completed, return the data
2. Sleep for some time (usleep_range)
3. Check for timeout using current jiffies value. Return an error if
timed out
4. Goto 1
usleep_range doesn't guarantee it's always going to wake up strictly in
(min, max) range, so such a situation is possible:
1. Driver reads completion status. No completion yet
2. Process sleeps indefinitely. In the meantime, TPM responds
3. We check for timeout without checking for the completion again.
Result is lost.
Such a situation also happens for the guest VMs: if vCPU goes to sleep
and doesn't get scheduled for some time, the guest TPM driver will
timeout instantly after waking up without checking for the completion
(which may already be in place).
Perform the completion check once again after exiting the busy loop in
order to give the device the last chance to send us some data.
Since now we check for completion in two places, extract this check into
a separate function.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Reviewed-by: Jonathan McDowell <noodles@meta.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
GCC appears to have kind of fragile inlining heuristics, in the
sense that it can change whether or not it inlines something based on
optimizations. It looks like the kcov instrumentation being added (or in
this case, removed) from a function changes the optimization results,
and some functions marked "inline" are _not_ inlined. In that case,
we end up with __init code calling a function not marked __init, and we
get the build warnings I'm trying to eliminate in the coming patch that
adds __no_sanitize_coverage to __init functions:
This problem is somewhat fragile (though using either __always_inline
or __init will deterministically solve it), but we've tripped over
this before with GCC and the solution has usually been to just use
__always_inline and move on.
For arm64 this requires forcing one ACPI function to be inlined with
__always_inline.
When the volume header contains erroneous values that do not reflect
the actual state of the filesystem, hfsplus_fill_super() assumes that
the attributes file is not yet created, which later results in hitting
BUG_ON() when hfsplus_create_attributes_file() is called. Replace this
BUG_ON() with -EIO error with a message to suggest running fsck tool.
where HFSPLUS_MAX_STRLEN is 255 bytes. The issue happens if length
of the structure instance has value bigger than 255 (for example,
65283). In such case, pointer on unicode buffer is going beyond of
the allocated memory.
The patch fixes the issue by checking the length value of
hfsplus_unistr instance and using 255 value in the case if length
value is bigger than HFSPLUS_MAX_STRLEN. Potential reason of such
situation could be a corruption of Catalog File b-tree's node.
Reported-by: Wenzhi Wang <wenzhi.wang@uwaterloo.ca> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org Reviewed-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20250710230830.110500-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reason of the issue that code doesn't check the correctness
of the requested offset and length. As a result, incorrect value
of offset or/and length could result in access out of allocated
memory.
This patch introduces is_bnode_offset_valid() method that checks
the requested offset value. Also, it introduces
check_and_correct_requested_length() method that checks and
correct the requested length (if it is necessary). These methods
are used in hfsplus_bnode_read(), hfsplus_bnode_write(),
hfsplus_bnode_clear(), hfsplus_bnode_copy(), and hfsplus_bnode_move()
with the goal to prevent the access out of allocated memory
and triggering the crash.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn> Reported-by: Jiaji Qin <jjtan24@m.fudan.edu.cn> Reported-by: Shuoran Bai <baishuoran@hrbeu.edu.cn> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Link: https://lore.kernel.org/r/20250703214804.244077-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch introduces is_bnode_offset_valid() method that checks
the requested offset value. Also, it introduces
check_and_correct_requested_length() method that checks and
correct the requested length (if it is necessary). These methods
are used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(),
hfs_bnode_copy(), and hfs_bnode_move() with the goal to prevent
the access out of allocated memory and triggering the crash.
res = hfs_find_init(HFS_SB(inode->i_sb)->ext_tree, &fd);
if (!res) {
res = __hfs_ext_cache_extent(&fd, inode, block);
hfs_find_exit(&fd);
}
return res;
}
The problem here that hfs_find_init() is trying to use
HFS_SB(inode->i_sb)->ext_tree that is not initialized yet.
It will be initailized when hfs_btree_open() finishes
the execution.
The patch adds checking of tree pointer in hfs_find_init()
and it reworks the logic of hfs_btree_open() by reading
the b-tree's header directly from the volume. The read_mapping_page()
is exchanged on filemap_grab_folio() that grab the folio from
mapping. Then, sb_bread() extracts the b-tree's header
content and copy it into the folio.
Reported-by: Wenzhi Wang <wenzhi.wang@uwaterloo.ca> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250710213657.108285-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot found a race condition when kcm_unattach(psock)
and kcm_release(kcm) are executed at the same time.
kcm_unattach() is missing a check of the flag
kcm->tx_stopped before calling queue_work().
If the kcm has a reserved psock, kcm_unattach() might get executed
between cancel_work_sync() and unreserve_psock() in kcm_release(),
requeuing kcm->tx_work right before kcm gets freed in kcm_done().
Remove kcm->tx_stopped and replace it by the less
error-prone disable_work_sync().
A chain/flowtable update with duplicated devices in the same batch is
possible. Unfortunately, netdev event path only removes the first
device that is found, leaving unregistered the hook of the duplicated
device.
Check if a duplicated device exists in the transaction batch, bail out
with EEXIST in such case.
WARNING is hit when unregistering the hook:
[49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150
[49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full)
[...]
[49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150
Fixes: 78d9f48f7f44 ("netfilter: nf_tables: add devices to existing flowtable") Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a89197589c ("kthread: Default affine kthread to its preferred NUMA node") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Since ptp virtual clock is registered only under ptp physical clock, both
ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use()
to lock &ptp->n_vclocks_mux and check ptp->n_vclocks.
However, when unregistering vclocks in n_vclocks_store(), the locking
ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of
ptp_clock_unregister() called through device_for_each_child_reverse()
is a virtual clock lock.
Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are
different locks, but in lockdep, a false positive occurs because the
possibility of deadlock is determined through lock-class.
To solve this, lock subclass annotation must be added to the posix_clock
rwsem of the vclock.
Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's necessary to adjust the MAC TX clock when the linkspeed changes,
but it's noted such adjustment always fails on TH1520 SoC, and reading
back from APB glue registers that control clock generation results in
garbage, causing broken link.
With some testing, it's found a clock must be ungated for access to APB
glue registers. Without any consumer, the clock is automatically
disabled during late kernel startup. Let's get and enable it if it's
described in devicetree.
For backward compatibility with older devicetrees, probing won't fail if
the APB clock isn't found. In this case, we emit a warning since the
link will break if the speed changes.
Fixes: 33a1a01e3afa ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC") Signed-off-by: Yao Zi <ziyao@disroot.org> Tested-by: Drew Fustini <fustini@kernel.org> Reviewed-by: Drew Fustini <fustini@kernel.org> Link: https://patch.msgid.link/20250808093655.48074-4-ziyao@disroot.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
reset_gpio is claimed in mdiobus_register_device(), but it is not
released in mdiobus_unregister_device(). It is instead only
released when the whole MDIO bus is unregistered.
When a device uses the reset_gpio property, it becomes impossible
to unregister it and register it again, because the GPIO remains
claimed.
This patch resolves that issue.
Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") # see notes Reviewed-by: Andrew Lunn <andrew@lunn.ch> Cc: Csókás Bence <csokas.bence@prolan.hu>
[ csokas.bence: Resolve rebase conflict and clarify msg ] Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
TJA1103/04/20/21 support both C22 and C45 accessing methods.
The TJA11xx driver has implemented the match_phy_device() API.
However, it does not handle the C45 ID. If C45 was used to access
TJA11xx, match_phy_device() would always return false due to
phydev->phy_id only used by C22 being empty, resulting in the
generic phy driver being used for TJA11xx PHYs.
Therefore, check phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] when
using C45.
Fixes: 1b76b2497aba ("net: phy: nxp-c45-tja11xx: simplify .match_phy_device OP") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://patch.msgid.link/20250807040832.2455306-1-xiaoning.wang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc has reported that commit 85975daeaa4d ("cpuidle: menu: Avoid
discarding useful information") caused the number of wakeup interrupts
to increase on an idle system [1], which was not expected to happen
after merely allowing shallower idle states to be selected by the
governor in some cases.
However, on the system in question, all of the idle states deeper than
WFI are rejected by the driver due to a firmware issue [2]. This causes
the governor to only consider the recent interval duriation data
corresponding to attempts to enter WFI that are successful and the
recent invervals table is filled with values lower than the scheduler
tick period. Consequently, the governor predicts an idle duration
below the scheduler tick period length and avoids stopping the tick
more often which leads to the observed symptom.
Address it by modifying the governor to update the recent intervals
table also when entering the previously selected idle state fails, so
it knows that the short idle intervals might have been the minority
had the selected idle states been actually entered every time.
Syzkaller managed to trigger lock dependency in xsk_notify via
register_netdevice. As discussed in [0], using register_netdevice
in the notifiers is problematic so skip adding hamradio for ops-locked
devices.
Syzkaller managed to trigger lock dependency in xsk_notify via
register_netdevice. As discussed in [0], using register_netdevice
in the notifiers is problematic so skip adding lapbeth for ops-locked
devices.
The variable ret in icss_iep_extts_enable() was incorrectly declared
as u32, while the function returns int and may return negative error
codes. This will cause sign extension issues and incorrect error
propagation. Update ret to be int to fix error handling.
This change corrects the declaration to avoid potential type mismatch.
Page pool can have pages "directly" (locklessly) recycled to it,
if the NAPI that owns the page pool is scheduled to run on the same CPU.
To make this safe we check that the NAPI is disabled while we destroy
the page pool. In most cases NAPI and page pool lifetimes are tied
together so this happens naturally.
The queue API expects the following order of calls:
-> mem_alloc
alloc new pp
-> stop
napi_disable
-> start
napi_enable
-> mem_free
free old pp
Here we allocate the page pool in ->mem_alloc and free in ->mem_free.
But the NAPIs are only stopped between ->stop and ->start. We created
page_pool_disable_direct_recycling() to safely shut down the recycling
in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't
have to worry about recycling any more.
Unfortunately, the page_pool_disable_direct_recycling() is not enough
to deal with failures which necessitate freeing the _new_ page pool.
If we hit a failure in ->mem_alloc or ->stop the new page pool has
to be freed while the NAPI is active (assuming driver attaches the
page pool to an existing NAPI instance and doesn't reallocate NAPIs).
Freeing the new page pool is technically safe because it hasn't been
used for any packets, yet, so there can be no recycling. But the check
in napi_assert_will_not_race() has no way of knowing that. We could
check if page pool is empty but that'd make the check much less likely
to trigger during development.
Add page_pool_enable_direct_recycling(), pairing with
page_pool_disable_direct_recycling(). It will allow us to create the new
page pools in "disabled" state and only enable recycling when we know
the reconfig operation will not fail.
Coincidentally it will also let us re-enable the recycling for the old
pool, if the reconfig failed:
-> mem_alloc (new)
-> stop (old)
# disables direct recycling for old
-> start (new)
# fail!!
-> start (old)
# go back to old pp but direct recycling is lost :(
-> mem_free (new)
The new helper is idempotent to make the life easier for drivers,
which can operate in HDS mode and support zero-copy Rx.
The driver can call the helper twice whether there are two pools
or it has multiple references to a single pool.
Fixes: 40eca00ae605 ("bnxt_en: unlink page pool when stopping Rx queue") Tested-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When link settings are changed emac->speed is populated by
emac_adjust_link(). The link speed and other settings are then written into
the DRAM. However if both ports are brought down after this and brought up
again or if the operating mode is changed and a firmware reload is needed,
the DRAM is cleared by icssg_config(). As a result the link settings are
lost.
Fix this by calling emac_adjust_link() after icssg_config(). This re
populates the settings in the DRAM after a new firmware load.
Currently, after modifying device port mode, the np_link_ok state
is immediately checked. At this point, the device may not yet ready,
leading to the querying of an intermediate state.
This patch will poll to check if np_link is ok after
modifying device port mode, and only report np_link_fail upon timeout.
Fixes: e0306637e85d ("net: hibmcge: Add support for mac link exception handling feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the network port is down, the queue is released, and ring->len is 0.
In debugfs, hbg_get_queue_used_num() will be called,
which may lead to a division by zero issue.
This patch adds a check, if ring->len is 0,
hbg_get_queue_used_num() directly returns 0.
Currently, the hibmcge netdev acquires the rtnl_lock in
pci_error_handlers.reset_prepare() and releases it in
pci_error_handlers.reset_done().
However, in the PCI framework:
pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked -
pci_dev_save_and_disable - err_handler->reset_prepare(dev);
In pci_slot_save_and_disable_locked():
list_for_each_entry(dev, &slot->bus->devices, bus_list) {
if (!dev->slot || dev->slot!= slot)
continue;
pci_dev_save_and_disable(dev);
if (dev->subordinate)
pci_bus_save_and_disable_locked(dev->subordinate);
}
This will iterate through all devices under the current bus and execute
err_handler->reset_prepare(), causing two devices of the hibmcge driver
to sequentially request the rtnl_lock, leading to a deadlock.
Since the driver now executes netif_device_detach()
before the reset process, it will not concurrently with
other netdev APIs, so there is no need to hold the rtnl_lock now.
Therefore, this patch removes the rtnl_lock during the reset process and
adjusts the position of HBG_NIC_STATE_RESETTING to ensure
that multiple resets are not executed concurrently.
Fixes: 3f5a61f6d504f ("net: hibmcge: Add reset supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Same pattern as previous patch: do not keep the expectation object
alive via refcount, only store a cookie value and then use that
as the skip hint for dump resumption.
AFAICS this has the same issue as the one resolved in the conntrack
dumper, when we do
if (!refcount_inc_not_zero(&exp->use))
to increment the refcount, there is a chance that exp == last, which
causes a double-increment of the refcount and subsequent memory leak.
Fixes: cf6994c2b981 ("[NETFILTER]: nf_conntrack_netlink: sync expectation dumping with conntrack table dumping") Fixes: e844a928431f ("netfilter: ctnetlink: allow to dump expectation per master conntrack") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a reference count leak in ctnetlink_dump_table():
if (res < 0) {
nf_conntrack_get(&ct->ct_general); // HERE
cb->args[1] = (unsigned long)ct;
...
While its very unlikely, its possible that ct == last.
If this happens, then the refcount of ct was already incremented.
This 2nd increment is never undone.
This prevents the conntrack object from being released, which in turn
keeps prevents cnet->count from dropping back to 0.
This will then block the netns dismantle (or conntrack rmmod) as
nf_conntrack_cleanup_net_list() will wait forever.
This can be reproduced by running conntrack_resize.sh selftest in a loop.
It takes ~20 minutes for me on a preemptible kernel on average before
I see a runaway kworker spinning in nf_conntrack_cleanup_net_list.
One fix would to change this to:
if (res < 0) {
if (ct != last)
nf_conntrack_get(&ct->ct_general);
But this reference counting isn't needed in the first place.
We can just store a cookie value instead.
A followup patch will do the same for ctnetlink_exp_dump_table,
it looks to me as if this has the same problem and like
ctnetlink_dump_table, we only need a 'skip hint', not the actual
object so we can apply the same cookie strategy there as well.
Commit b40c5f4fde22 ("udp: disable inner UDP checksum offloads in
IPsec case") tried to fix checksumming in UFO when the packets are
going through IPsec, so that we can't rely on offloads because the UDP
header and payload will be encrypted.
But when doing a TCP test over VXLAN going through IPsec transport
mode with GSO enabled (esp4_offload module loaded), I'm seeing broken
UDP checksums on the encap after successful decryption.
The skbs get to udp4_ufo_fragment/__skb_udp_tunnel_segment via
__dev_queue_xmit -> validate_xmit_skb -> skb_gso_segment and at this
point we've already dropped the dst (unless the device sets
IFF_XMIT_DST_RELEASE, which is not common), so need_ipsec is false and
we proceed with checksum offload.
Make need_ipsec also check the secpath, which is not dropped on this
callpath.
This change causes traffic using GSO with SW crypto running through a
NIC capable of HW offload to no longer get segmented during
validate_xmit_xfrm, and is unrelated to the bonding use case mentioned
in the commit.
Commit 49431af6c4ef incorrectly assumes that the GSO path is only used
by HW offload, but it's also useful for SW crypto.
This patch re-enables GSO for SW crypto. It's not an exact revert to
preserve the other changes made to xfrm_dev_offload_ok afterwards, but
it reverts all of its effects.
While reverting commit f75a2804da39 ("xfrm: destroy xfrm_state
synchronously on net exit path"), I incorrectly changed
xfrm_state_flush's "proto" argument back to IPSEC_PROTO_ANY. This
reverts some of the changes in commit dbb2483b2a46 ("xfrm: clean up
xfrm protocol checks"), and leads to some states not being removed
when we exit the netns.
Pass 0 instead of IPSEC_PROTO_ANY from both xfrm_state_fini
xfrm6_tunnel_net_exit, so that xfrm_state_flush deletes all states.
smaps_hugetlb_range() handles the pte without holdling ptl, and may be
concurrenct with migration, leaing to BUG_ON in pfn_swap_entry_to_page().
The race is as follows.
As soon as we'd inserted a file reference into descriptor table, another
thread could close it. That's fine for the case when all we are doing is
returning that descriptor to userland (it's a race, but it's a userland
race and there's nothing the kernel can do about it). However, if we
follow fd_install() with any kind of access to objects that would be
destroyed on close (be it the struct file itself or anything destroyed
by its ->release()), we have a UAF.
dma_buf_fd() is a combination of reserving a descriptor and fd_install().
habanalabs export_dmabuf() calls it and then proceeds to access the
objects destroyed on close. In particular, it grabs an extra reference to
another struct file that will be dropped as part of ->release() for ours;
that "will be" is actually "might have already been".
Fix that by reserving descriptor before anything else and do fd_install()
only when everything had been set up. As a side benefit, we no longer
have the failure exit with file already created, but reference to
underlying file (as well as ->dmabuf_export_cnt, etc.) not grabbed yet;
unlike dma_buf_fd(), fd_install() can't fail.
Fixes: db1a8dd916aa ("habanalabs: add support for dma-buf exporter") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
We already called ib_drain_qp() before and that makes sure
send_done() was called with IB_WC_WR_FLUSH_ERR, but
didn't called atomic_dec_and_test(&sc->send_io.pending.count)
So we may never reach the info->send_pending == 0 condition.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 5349ae5e05fa ("smb: client: let send_done() cleanup before calling smbd_disconnect_rdma_connection()") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should call ib_dma_unmap_single() and mempool_free() before calling
smbd_disconnect_rdma_connection().
And smbd_disconnect_rdma_connection() needs to be the last function to
call as all other state might already be gone after it returns.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The charge-control subsystem in the ChromeOS EC is not strictly tied to
its USB-PD subsystem.
Since commit 7613bc0d116a ("mfd: cros_ec: Don't load charger with UCSI")
the presence of EC_FEATURE_UCSI_PPM would inhibit the probing of the
charge-control driver.
Furthermore recent versions of the EC firmware in Framework laptops
hard-disable EC_FEATURE_USB_PD to avoid probing cros-usbpd-charger,
which then also breaks cros-charge-control.
Since these values can be large, the multiplication may exceed the
maximum value of an int (INT_MAX) and overflow (Our platform did),
leading to an incorrect adist.
User-visible impact:
The memory tiering subsystem will misinterpret slow memory (like CXL)
as faster than DRAM, causing inappropriate demotion of pages from
CXL (slow memory) to DRAM (fast memory).
For example, we will see the following demotion chains from the dmesg, where
Node0,1 are DRAM, and Node2,3 are CXL node:
Demotion targets for Node 0: null
Demotion targets for Node 1: null
Demotion targets for Node 2: preferred: 0-1, fallback: 0-1
Demotion targets for Node 3: preferred: 0-1, fallback: 0-1
Change MEMTIER_ADISTANCE_DRAM to be a long constant by writing it with
the 'L' suffix. This prevents the overflow because the multiplication
will then be done in the long type which has a larger range.
Link: https://lkml.kernel.org/r/20250611023439.2845785-1-lizhijian@fujitsu.com Link: https://lkml.kernel.org/r/20250610062751.2365436-1-lizhijian@fujitsu.com Fixes: 3718c02dbd4c ("acpi, hmat: calculate abstract distance with HMAT") Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com> Acked-by: Balbir Singh <balbirs@nvidia.com> Reviewed-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
REQ_OP_ZONE_FINISH is defined as "12", which makes
op_is_write(REQ_OP_ZONE_FINISH) return false, despite the fact that a
zone finish operation is an operation that modifies a zone (transition
it to full) and so should be considered as a write operation (albeit
one that does not transfer any data to the device).
Fix this by redefining REQ_OP_ZONE_FINISH to be an odd number (13), and
redefine REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL using sequential
odd numbers from that new value.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250625093327.548866-2-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application") Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turns out that the ECDT table inside the ThinkBook 14 G7 IML
contains a valid EC description but an invalid ID string
("_SB.PC00.LPCB.EC0"). Ignoring this ECDT based on the invalid
ID string prevents the kernel from detecting the built-in touchpad,
so relax the sanity check of the ID string and only reject ECDTs
with empty ID strings.
Reported-by: Ilya K <me@0upti.me> Fixes: 7a0d59f6a913 ("ACPI: EC: Ignore ECDT tables with an invalid ID string") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Ilya K <me@0upti.me> Link: https://patch.msgid.link/20250729062038.303734-1-W_Armin@gmx.de Cc: 6.16+ <stable@vger.kernel.org> # 6.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci_bridge_d3_possible() is called from both pcie_portdrv_probe() and
pcie_portdrv_remove() to determine whether runtime power management shall
be enabled (on probe) or disabled (on remove) on a PCIe port.
The underlying assumption is that pci_bridge_d3_possible() always returns
the same value, else a runtime PM reference imbalance would occur. That
assumption is not given if the PCIe port is inaccessible on remove due to
hot-unplug: pci_bridge_d3_possible() calls pciehp_is_native(), which
accesses Config Space to determine whether the port is Hot-Plug Capable.
An inaccessible port returns "all ones", which is converted to "all
zeroes" by pcie_capability_read_dword(). Hence the port no longer seems
Hot-Plug Capable on remove even though it was on probe.
The resulting runtime PM ref imbalance causes warning messages such as:
Avoid the Config Space access (and thus the runtime PM ref imbalance) by
caching the Hot-Plug Capable bit in struct pci_dev.
The struct already contains an "is_hotplug_bridge" flag, which however is
not only set on Hot-Plug Capable PCIe ports, but also Conventional PCI
Hot-Plug bridges and ACPI slots. The flag identifies bridges which are
allocated additional MMIO and bus number resources to allow for hierarchy
expansion.
The kernel is somewhat sloppily using "is_hotplug_bridge" in a number of
places to identify Hot-Plug Capable PCIe ports, even though the flag
encompasses other devices. Subsequent commits replace these occurrences
with the new flag to clearly delineate Hot-Plug Capable PCIe ports from
other kinds of hotplug bridges.
Document the existing "is_hotplug_bridge" and the new "is_pciehp" flag
and document the (non-obvious) requirement that pci_bridge_d3_possible()
always returns the same value across the entire lifetime of a bridge,
including its hot-removal.
If the BIOS sets a _PPC frequency limit upfront, it will fail to take
effect due to a call ordering issue. Namely, freq_qos_update_request()
is called before freq_qos_add_request() for the given request causing
the constraint update to be ignored. The call sequence in question is
as follows:
Address this by adding an acpi_processor_get_platform_limit() call
to acpi_processor_ppc_init(), after the perflib_req activation via
freq_qos_add_request(), which causes the initial _PPC limit to be
picked up as appropriate. However, also ensure that the _PPC limit
will not be picked up in the cases when the cpufreq driver does not
call acpi_processor_register_performance() by adding a pr->performance
check to the related_cpus loop in acpi_processor_ppc_init().
Fixes: d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier") Signed-off-by: Jiayi Li <lijiayi@kylinos.cn> Link: https://patch.msgid.link/20250721032606.3459369-1-lijiayi@kylinos.cn
[ rjw: Consolidate pr-related checks in acpi_processor_ppc_init() ]
[ rjw: Subject and changelog adjustments ] Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 2d8b39a62a5d ACPI: processor: Avoid NULL pointer dereferences at init time Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 3000ce3c52f8 cpufreq: Use per-policy frequency QoS Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: a1bb46c36ce3 ACPI: processor: Add QoS requests for all CPUs Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The _CRS resources in many cases want to have ResourceSource field
to be a type of ACPI String. This means that to compile properly
we need to enclosure the name path into double quotes. This will
in practice defer the interpretation to a run-time stage, However,
this may be interpreted differently on different OSes and ACPI
interpreter implementations. In particular ACPICA might not correctly
recognize the leading '^' (caret) character and will not resolve
the relative name path properly. On top of that, this piece may be
used in SSDTs which are loaded after the DSDT and on itself may also
not resolve relative name paths outside of their own scopes.
With this all said, fix documentation to use fully-qualified name
paths always to avoid any misinterpretations, which is proven to
work.
Fixes: 8eb5c87a92c0 ("i2c: add ACPI support for I2C mux ports") Reported-by: Yevhen Kondrashyn <e.kondrashyn@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250710170225.961303-1-andriy.shevchenko@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sysctl_nr_open is set to a very high value (for example, 1073741816
as set by systemd), processes attempting to use file descriptors near
the limit can trigger massive memory allocation attempts that exceed
INT_MAX, resulting in a WARNING in mm/slub.c:
WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288
This happens because kvmalloc_array() and kvmalloc() check if the
requested size exceeds INT_MAX and emit a warning when the allocation is
not flagged with __GFP_NOWARN.
Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a
process calls dup2(oldfd, 1073741880), the kernel attempts to allocate:
- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes
- Multiple bitmaps: ~400MB
- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)
Reproducer:
1. Set /proc/sys/fs/nr_open to 1073741816:
# echo 1073741816 > /proc/sys/fs/nr_open
2. Run a program that uses a high file descriptor:
#include <unistd.h>
#include <sys/resource.h>
int main() {
struct rlimit rlim = {1073741824, 1073741824};
setrlimit(RLIMIT_NOFILE, &rlim);
dup2(2, 1073741880); // Triggers the warning
return 0;
}
3. Observe WARNING in dmesg at mm/slub.c:5027
systemd commit a8b627a introduced automatic bumping of fs.nr_open to the
maximum possible value. The rationale was that systems with memory
control groups (memcg) no longer need separate file descriptor limits
since memory is properly accounted. However, this change overlooked
that:
1. The kernel's allocation functions still enforce INT_MAX as a maximum
size regardless of memcg accounting
2. Programs and tests that legitimately test file descriptor limits can
inadvertently trigger massive allocations
3. The resulting allocations (>8GB) are impractical and will always fail
systemd's algorithm starts with INT_MAX and keeps halving the value
until the kernel accepts it. On most systems, this results in nr_open
being set to 1073741816 (0x3ffffff8), which is just under 1GB of file
descriptors.
While processes rarely use file descriptors near this limit in normal
operation, certain selftests (like
tools/testing/selftests/core/unshare_test.c) and programs that test file
descriptor limits can trigger this issue.
Fix this by adding a check in alloc_fdtable() to ensure the requested
allocation size does not exceed INT_MAX. This causes the operation to
fail with -EMFILE instead of triggering a kernel warning and avoids the
impractical >8GB memory allocation request.
Fixes: 9cfe015aa424 ("get rid of NR_OPEN and introduce a sysctl_nr_open") Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/20250629074021.1038845-1-sashal@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Restore the len >= 288 condition on using the AVX implementation, which
was incidentally removed by commit 318c53ae02f2 ("crypto: x86/poly1305 -
Add block-only interface"). This check took into account the overhead
in key power computation, kernel-mode "FPU", and tail handling
associated with the AVX code. Indeed, restoring this check slightly
improves performance for len < 256 as measured using poly1305_kunit on
an "AMD Ryzen AI 9 365" (Zen 5) CPU:
While the optimal threshold for this CPU might be slightly lower than
288 (see the len == 256 case), other CPUs would need to be tested too,
and these sorts of benchmarks can underestimate the true cost of
kernel-mode "FPU". Therefore, for now just restore the 288 threshold.
Restore the SIMD usability check and base conversion that were removed
by commit 318c53ae02f2 ("crypto: x86/poly1305 - Add block-only
interface").
This safety check is cheap and is well worth eliminating a footgun.
While the Poly1305 functions should not be called when SIMD registers
are unusable, if they are anyway, they should just do the right thing
instead of corrupting random tasks' registers and/or computing incorrect
MACs. Fixing this is also needed for poly1305_kunit to pass.
Just use irq_fpu_usable() instead of the original crypto_simd_usable(),
since poly1305_kunit won't rely on crypto_simd_disabled_for_test.
Make fscrypt no longer use Crypto API drivers for non-inline crypto
engines, even when the Crypto API prioritizes them over CPU-based code
(which unfortunately it often does). These drivers tend to be really
problematic, especially for fscrypt's workload. This commit has no
effect on inline crypto engines, which are different and do work well.
Specifically, exclude drivers that have CRYPTO_ALG_KERN_DRIVER_ONLY or
CRYPTO_ALG_ALLOCATES_MEMORY set. (Later, CRYPTO_ALG_ASYNC should be
excluded too. That's omitted for now to keep this commit backportable,
since until recently some CPU-based code had CRYPTO_ALG_ASYNC set.)
There are two major issues with these drivers: bugs and performance.
First, these drivers tend to be buggy. They're fundamentally much more
error-prone and harder to test than the CPU-based code. They often
don't get tested before kernel releases, and even if they do, the crypto
self-tests don't properly test these drivers. Released drivers have
en/decrypted or hashed data incorrectly. These bugs cause issues for
fscrypt users who often didn't even want to use these drivers, e.g.:
These drivers have also similarly caused issues for dm-crypt users,
including data corruption and deadlocks. Since Linux v5.10, dm-crypt
has disabled most of them by excluding CRYPTO_ALG_ALLOCATES_MEMORY.
Second, these drivers tend to be *much* slower than the CPU-based code.
This may seem counterintuitive, but benchmarks clearly show it. There's
a *lot* of overhead associated with going to a hardware driver, off the
CPU, and back again. To prove this, I gathered as many systems with
this type of crypto engine as I could, and I measured synchronous
encryption of 4096-byte messages (which matches fscrypt's workload):
So, there was no case in which the crypto engine was even *close* to
being faster. On the first three, which have AES instructions in the
CPU, the CPU was 30 to 55 times faster (!). Even on STM32MP157F-DK2
which has a Cortex-A7 CPU that doesn't have AES instructions, AES was
over 4 times faster on the CPU. And Adiantum encryption, which is what
actually should be used on CPUs like that, was over 17 times faster.
Other justifications that have been given for these non-inline crypto
engines (almost always coming from the hardware vendors, not actual
users) don't seem very plausible either:
- The crypto engine throughput could be improved by processing
multiple requests concurrently. Currently irrelevant to fscrypt,
since it doesn't do that. This would also be complex, and unhelpful
in many cases. 2 of the 4 engines I tested even had only one queue.
- Some of the engines, e.g. STM32, support hardware keys. Also
currently irrelevant to fscrypt, since it doesn't support these.
Interestingly, the STM32 driver itself doesn't support this either.
- Free up CPU for other tasks and/or reduce energy usage. Not very
plausible considering the "short" message length, driver overhead,
and scheduling overhead. There's just very little time for the CPU
to do something else like run another task or enter low-power state,
before the message finishes and it's time to process the next one.
- Some of these engines resist power analysis and electromagnetic
attacks, while the CPU-based crypto generally does not. In theory,
this sounds great. In practice, if this benefit requires the use of
an off-CPU offload that massively regresses performance and has a
low-quality, buggy driver, the price for this hardening (which is
not relevant to most fscrypt users, and tends to be incomplete) is
just too high. Inline crypto engines are much more promising here,
as are on-CPU solutions like RISC-V High Assurance Cryptography.
Using device_find_child() to locate a probed virtual-device-port node
causes a device refcount imbalance, as device_find_child() internally
calls get_device() to increment the device’s reference count before
returning its pointer. vdc_port_mpgroup_check() directly returns true
upon finding a matching device without releasing the reference via
put_device(). We should call put_device() to decrement refcount.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 3ee70591d6c4 ("sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Link: https://lore.kernel.org/r/20250719075856.3447953-1-make24@iscas.ac.cn Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO") 691efbedc60d ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO") 2ff906994b6c ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO") 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
In init_cpu_fullname(), a constant pointer to "model" property is
retrieved. It's later modified by the strsep() function, which is
illegal and corrupts kernel's FDT copy. This is shown by dmesg,
OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
Create a mutable copy of the model property and do in-place operations
on the mutable copy instead. loongson_sysconf.cpuname lives across the
kernel lifetime, thus manually releasing isn't necessary.
Also move the of_node_put() call for the root node after the usage of
its property, since of_node_put() decreases the reference counter thus
usage after the call is unsafe.
Cc: stable@vger.kernel.org Fixes: 44a01f1f726a ("LoongArch: Parsing CPU-related information from DTS") Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now relocate_new_kernel_size is a .long value, which means 32bit, so its
high 32bit is undefined. This causes memcpy((void *)reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size) in machine_kexec_prepare()
access out of range memories in some cases, and then end up with an ADE
exception.
So make relocate_new_kernel_size be a .quad value, which means 64bit, to
avoid such errors.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and easier to
reason about.
The extra pass of bpf_int_jit_compile() skips JIT context initialization
which essentially skips offset calculation leaving out_offset = -1, so
the jmp_offset in emit_bpf_tail_call is calculated by
"#define jmp_offset (out_offset - (cur_offset))"
is a negative number, which is wrong. The final generated assembly are
as follow.
Like s390 and the jailhouse hypervisor, LoongArch's PCI architecture allows
passing isolated PCI functions to a guest OS instance. So it is possible
that there is a multi-function device without function 0 for the host or
guest.
Allow probing such functions by adding a IS_ENABLED(CONFIG_LOONGARCH) case
in the hypervisor_isolated_pci_functions() helper.
This is similar to commit 189c6c33ff42 ("PCI: Extend isolated function
probing to s390").
When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.
Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.
Reported-by: Petro Pavlov <petro.pavlov@vastdata.com> Fixes: c44c5eeb2c02 ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR") Cc: stable@vger.kernel.org Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().
Reported-by: lei lu <llfamsec@gmail.com> Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/ Fixes: d20c11d86d8f ("nfsd: Protect session creation and client confirm using client_lock") Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently FILEID_IS_DIR is raised in fh_flags which is wrong.
Raise it in handle->handle_type were it's supposed to be.
Link: https://lore.kernel.org/20250624-work-pidfs-fhandle-v2-1-d02a04858fe3@kernel.org Fixes: c374196b2b9f ("fs: name_to_handle_at() support for "explicit connectable" file handles") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Make sure to drop the references to the IEP OF node and device taken by
of_parse_phandle() and of_find_device_by_node() when looking up IEP
devices during probe.
Drop the bogus additional reference taken on successful lookup so that
the device is released correctly by icss_iep_put().
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Cc: stable@vger.kernel.org # 6.6 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reference count to the WED devices has already been incremented when
looking them up using of_find_device_by_node() so drop the bogus
additional reference taken during probe.
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Cc: stable@vger.kernel.org # 5.19 Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-5-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the references to the IERB OF node and platform device
taken by of_parse_phandle() and of_find_device_by_node() during probe.
Fixes: e7d48e5fbf30 ("net: enetc: add a mini driver for the Integrated Endpoint Register Block") Cc: stable@vger.kernel.org # 5.13 Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-3-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.
Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 21b688dabecb ("net: phy: micrel: Cable Diag feature for lan8814
phy") introduced cable_test support for the LAN8814 that reuses parts of
the KSZ886x logic and introduced the cable_diag_reg and pair_mask
parameters to account for differences between those chips.
However, it did not update the ksz8081_type struct, so those members are
now 0, causing no pairs to be tested in ksz886x_cable_test_get_status
and ksz886x_cable_test_wait_for_completion to poll the wrong register
for the affected PHYs (Basic Control/Reset, which is 0 in normal
operation) and exit immediately.
Fix this by setting both struct members accordingly.
netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:
rmem < READ_ONCE(sk->sk_rcvbuf)
to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:
rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)
The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
(t=26000 jiffies g=230833 q=259957)
NMI backtrace for cpu 0
CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
Call Trace:
<IRQ>
dump_stack lib/dump_stack.c:120
nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
update_process_times kernel/time/timer.c:1953
tick_sched_handle kernel/time/tick-sched.c:227
tick_sched_timer kernel/time/tick-sched.c:1399
__hrtimer_run_queues kernel/time/hrtimer.c:1652
hrtimer_interrupt kernel/time/hrtimer.c:1717
__sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
</IRQ>
While .led_blink_set() would previously put an LED into an unconditional
permanently blinking state, the offending commit now uses same operation
to (also?) set the blink timing of the netdev trigger when offloading.
This breaks many if not all of the existing PHY drivers which offer
offloading LED operations, as those drivers would just put the LED into
blinking state after .led_blink_set() has been called.
Unfortunately the change even made it into stable kernels for unknown
reasons, so it should be reverted there as well.
Driver in probe() updates each of 'reg_field' with 'reg_base':
for (i = 0; i < REG_MAX_COUNT; i++)
regs[i].reg += reg_base;
'reg_field' array (under variable 'regs' above) is statically allocated,
thus each re-bind would add another 'reg_base' leading to bogus
register addresses. Constify the local 'reg_field' array and duplicate
it in probe to solve this.
Fixes: 96a2e242a5dc ("leds: flash: Add driver to support flash LED module in QCOM PMICs") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250529063335.8785-2-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instance 1:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.
Cc: stable@vger.kernel.org Fixes: 10af0273a35a ("gpio: mlxbf3: only get IRQ for device instance 0") Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/8d2b630c71b3742f2c74242cf7d602706a6108e6.1754928650.git.davthompson@nvidia.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 20117cf426b6 ("gpio: pxa: Make irq_chip immutableas")
as it caused a regression on samsung coreprimevelte and we've not been
able to fix it so far.
The gpio-mlxbf2 driver interfaces with four GPIO controllers,
device instances 0-3. There are two IRQ resources shared between
the four controllers, and they are found in the ACPI table for
instances 0 and 3. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instances 1 and 2:
mlxbf2_gpio MLNXBF22:01: error -ENXIO: IRQ index 0 not found
According to the "GPIO Expander Map / Table" section of the J722S EVM
Schematic within the Evaluation Module Design Files package [0], the
GPIO Pin P05 located on the GPIO Expander 1 (I2C0/0x23) has to be pulled
down to select the Type-C interface. Since commit under Fixes claims to
enable the Type-C interface, update the property within "p05-hog" from
"output-high" to "output-low", thereby switching from the Type-A
interface to the Type-C interface.
[0]: https://www.ti.com/lit/zip/sprr495
Cc: stable@vger.kernel.org Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20250623100657.4082031-1-s-vadapalli@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quote from the virtio specification chapter 4.2.2.2:
"For the device-specific configuration space, the driver MUST use 8 bit
wide accesses for 8 bit wide fields, 16 bit wide and aligned accesses
for 16 bit wide fields and 32 bit wide and aligned accesses for 32 and
64 bit wide fields."
Commit 34331d7beed7 ("smb: client: fix first command failure during
re-negotiation") addressed a race condition by updating lstrp before
entering negotiate state. However, this approach may have some unintended
side effects.
The lstrp field is documented as "when we got last response from this
server", and updating it before actually receiving a server response
could potentially affect other mechanisms that rely on this timestamp.
For example, the SMB echo detection logic also uses lstrp as a reference
point. In scenarios with frequent user operations during reconnect states,
the repeated calls to cifs_negotiate_protocol() might continuously
update lstrp, which could interfere with the echo detection timing.
Additionally, commit 266b5d02e14f ("smb: client: fix race condition in
negotiate timeout by using more precise timing") introduced a dedicated
neg_start field specifically for tracking negotiate start time. This
provides a more precise solution for the original race condition while
preserving the intended semantics of lstrp.
Since the race condition is now properly handled by the neg_start
mechanism, the lstrp update in cifs_negotiate_protocol() is no longer
necessary and can be safely removed.
Fixes: 266b5d02e14f ("smb: client: fix race condition in negotiate timeout by using more precise timing") Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
