When we cork messages in psock->cork, the last message triggers the
flushing will result in sending a sk_msg larger than the current
message size. In this case, in tcp_bpf_send_verdict(), 'copied' becomes
negative at least in the following case:
Therefore, it could lead to the following BUG with a proper value of
'copied' (thanks to syzbot). We should not use negative 'copied' as a
return value here.
In case of error in build_tokens_sysfs(), all the memory that has been
allocated is freed at end of this function. But then free_group() is
called which performs memory deallocation again.
Also, instead of free_group() call, there should be exit_dell_smbios_smm()
and exit_dell_smbios_wmi() calls, since there is initialization, but there
is no release of resources in case of an error.
Fix these issues by replacing free_group() call with
exit_dell_smbios_wmi() and exit_dell_smbios_smm().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 33b9ca1e53b4 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Link: https://lore.kernel.org/r/20240830065428.9544-1-amishin@t-argos.ru Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
82580 NICs have a hardware bug that makes it
necessary to write into the TSICR (TimeSync Interrupt Cause) register
to clear it:
https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/
Add a conditional so only for 82580 we write into the TSICR register,
so we don't risk losing events for other models.
Without this change, when running ptp4l with an Intel 82580 card,
I get the following output:
> timed out while polling for tx timestamp increasing tx_timestamp_timeout or
> increasing kworker priority may correct this issue, but a driver bug likely
> causes it
This goes away with this change.
This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events").
Fixes: ee14cc9ea19b ("igb: Fix missing time sync events") Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/ Tested-by: Daiwei Li <daiweili@google.com> Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Daiwei Li <daiweili@google.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0
(SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an
inbound PCIe TLP spans more than two internal AXI 128-byte bursts,
the bus may corrupt the packet payload and the corrupt data may
cause associated applications or the processor to hang.
The workaround for Errata #i2037 is to limit the maximum read
request size and maximum payload size to 128 bytes. Add workaround
for Errata #i2037 here.
The errata and workaround is applicable only to AM65x SR 1.0 and
later versions of the silicon will have this fixed.
Set the host status byte when a data completion error is encountered
otherwise the upper layer may end up using the invalid zero'ed data.
The following output was observed from scsi/sd.c prior to this fix.
After being asked about support for WPA3 for BCM43224 chipset it
was found that all it takes is setting the MFP_CAPABLE flag and
mac80211 will take care of all that is needed [1].
In several places a division by fmt->vdownsampling[p] was
missing in the sizeimage[p] calculation, causing incorrect
behavior for multiplanar formats were some planes are smaller
than the first plane.
Found by new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Avoid mounting filesystems where the partition would overflow the
32-bits used for block number. Also refuse to mount filesystems where
the partition length is so large we cannot safely index bits in a
block bitmap.
Now there is a issue is that code checks reports a warning: implicit
narrowing conversion from type 'unsigned int' to small type 'u8' (the
'keylen' variable). Fix it by removing the 'keylen' variable.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Allwinner H6 IOMMU has a bypass register, which allows to circumvent
the page tables for each possible master. The reset value for this
register is 0, which disables the bypass.
The Allwinner H616 IOMMU resets this register to 0x7f, which activates
the bypass for all masters, which is not what we want.
Always clear this register to 0, to enforce the usage of page tables,
and make this driver compatible with the H616 in this respect.
When (AF_UNIX, SOCK_STREAM) socket connect()s to a listening socket,
the listener's sk_peer_pid/sk_peer_cred are copied to the client in
copy_peercred().
Then, the client's sk_peer_pid and sk_peer_cred are always NULL, so
we need not call put_pid() and put_cred() there.
When a process accept()s connection from a unix socket
(either stream or seqpacket)
it gets the socket with the label of the connecting process.
For example, if a connecting process has a label 'foo',
the accept()ed socket will also have 'in' and 'out' labels 'foo',
regardless of the label of the listener process.
This is because kernel creates unix child sockets
in the context of the connecting process.
I do not see any obvious way for the listener to abuse
alien labels coming with the new socket, but,
to be on the safe side, it's better fix new socket labels.
Add a simple sanity check to HD-audio HDMI Channel Map controls.
Although the value might not be accepted for the actual connection, we
can filter out some bogus values beforehand, and that should be enough
for making kselftest happier.
The final bit of stats that is global is the rpc svc_stat. Move this
into the nfsd_net struct and use that everywhere instead of the global
struct. Remove the unused global struct.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have a global set of counters that we modify for all of the nfsd
operations, but now that we're exposing these stats across all network
namespaces we need to make the stats also be per-network namespace. We
already have some caching stats that are per-network namespace, so move
these definitions into the same counter and then adjust all the helpers
and users of these stats to provide the appropriate nfsd_net struct so
that the stats are maintained for the per-network namespace objects.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v5.10.y ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are running nfsd servers inside of containers with their own network
namespace, and we want to monitor these services using the stats found
in /proc. However these are not exposed in the proc inside of the
container, so we have to bind mount the host /proc into our containers
to get at this information.
Separate out the stat counters init and the proc registration, and move
the proc registration into the pernet operations entry and exit points
so that these stats can be exposed inside of network namespaces.
This is an intermediate step, this just exposes the global counters in
the network namespace. Subsequent patches will move these counters into
the per-network namespace container.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're going to merge the stats all into per network namespace in
subsequent patches, rename these nn counters to be consistent with the
rest of the stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nfsd is the only thing using this helper, and it doesn't use the private
currently. When we switch to per-network namespace stats we will need
the struct net * in order to get to the nfsd_net. Use the net as the
proc private so we can utilize this when we make the switch over.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v5.10.y ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since only one service actually reports the rpc stats there's not much
of a reason to have a pointer to it in the svc_program struct. Adjust
the svc_create_pooled function to take the sv_stats as an argument and
pass the struct through there as desired instead of getting it from the
svc_program->pg_stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v5.10.y ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A lot of places are setting a blank svc_stats in ->pg_stats and never
utilizing these stats. Remove all of these extra structs as we're not
reporting these stats anywhere.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We check for the existence of ->sv_stats elsewhere except in the core
processing code. It appears that only nfsd actual exports these values
anywhere, everybody else just has a write only copy of sv_stats in their
svc_program. Add a check for ->sv_stats before every adjustment to
allow us to eliminate the stats struct from all the users who don't
report the stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v5.10.y ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fs/nfsd/export.c: In function 'svc_export_parse':
fs/nfsd/export.c:737:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
737 | }
On my systems, svc_export_parse() has a stack frame of over 800
bytes, not 1040, but nonetheless, it could do with some reduction.
When a struct svc_export is on the stack, it's a temporary structure
used as an argument, and not visible as an actual exported FS. No
need to reserve space for export_stats in such cases.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310012359.YEw5IrK6-lkp@intel.com/ Cc: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 4b14885411f7 ("nfsd: make all of the nfsd stats per-network namespace")
[ cel: adjusted to apply to v5.10.y ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ‘export_stats_init’,
inlined from ‘svc_export_alloc’ at fs/nfsd/export.c:866:6:
fs/nfsd/export.c:337:16: warning: ‘nfsd_percpu_counters_init’ accessing 40 bytes in a region of size 0 [-Wstringop-overflow=]
337 | return nfsd_percpu_counters_init(&stats->counter, EXP_STATS_COUNTERS_NUM);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/nfsd/export.c:337:16: note: referencing argument 1 of type ‘struct percpu_counter[0]’
fs/nfsd/stats.h: In function ‘svc_export_alloc’:
fs/nfsd/stats.h:40:5: note: in a call to function ‘nfsd_percpu_counters_init’
40 | int nfsd_percpu_counters_init(struct percpu_counter counters[], int num);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 93483ac5fec6 ("nfsd: expose /proc/net/sunrpc/nfsd in net namespaces") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error paths in nfsd_svc() are needlessly complex and can result in a
final call to svc_put() without nfsd_last_thread() being called. This
results in the listening sockets not being closed properly.
The per-netns setup provided by nfsd_startup_new() and removed by
nfsd_shutdown_net() is needed precisely when there are running threads.
So we don't need nfsd_up_before. We don't need to know if it *was* up.
We only need to know if any threads are left. If none are, then we must
call nfsd_shutdown_net(). But we don't need to do that explicitly as
nfsd_last_thread() does that for us.
So simply call nfsd_last_thread() before the last svc_put() if there are
no running threads. That will always do the right thing.
Also discard:
pr_info("nfsd: last server has exited, flushing export cache\n");
It may not be true if an attempt to start the first server failed, and
it isn't particularly helpful and it simply reports normal behaviour.
Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid holding the bucket lock while freeing cache entries. This
change also caps the number of entries that are freed when the
shrinker calls to reduce the shrinker's impact on the cache's
effectiveness.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable nfsd_prune_bucket() to drop the bucket lock while calling
kfree(). Use the same pattern that Jeff recently introduced in the
NFSD filecache.
A few percpu operations are moved outside the lock since they
temporarily disable local IRQs which is expensive and does not
need to be done while the lock is held.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: c135e1269f34 ("NFSD: Refactor the duplicate reply cache shrinker") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For readability, rename to match the other helpers.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 4b14885411f7 ("nfsd: make all of the nfsd stats per-network namespace") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To reduce contention on the bucket locks, we must avoid calling
kfree() while each bucket lock is held.
Start by refactoring nfsd_reply_cache_free_locked() into a helper
that removes an entry from the bucket (and must therefore run under
the lock) and a second helper that frees the entry (which does not
need to hold the lock).
For readability, rename the helpers nfsd_cacherep_<verb>.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: a9507f6af145 ("NFSD: Replace nfsd_prune_bucket()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f5f9d4a314da ("nfsd: move reply cache initialization into nfsd
startup") moved the initialization of the reply cache into nfsd startup,
but didn't account for the stats counters, which can be accessed before
nfsd is ever started. The result can be a NULL pointer dereference when
someone accesses /proc/fs/nfsd/reply_cache_stats while nfsd is still
shut down.
This is a regression and a user-triggerable oops in the right situation:
- non-x86_64 arch
- /proc/fs/nfsd is mounted in the namespace
- nfsd is not started in the namespace
- unprivileged user calls "cat /proc/fs/nfsd/reply_cache_stats"
Although this is easy to trigger on some arches (like aarch64), on
x86_64, calling this_cpu_ptr(NULL) evidently returns a pointer to the
fixed_percpu_data. That struct looks just enough like a newly
initialized percpu var to allow nfsd_reply_cache_stats_show to access
it without Oopsing.
Move the initialization of the per-net+per-cpu reply-cache counters
back into nfsd_init_net, while leaving the rest of the reply cache
allocations to be done at nfsd startup time.
Kudos to Eirik who did most of the legwork to track this down.
Cc: stable@vger.kernel.org # v6.3+ Fixes: f5f9d4a314da ("nfsd: move reply cache initialization into nfsd startup") Reported-and-tested-by: Eirik Fuller <efuller@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2215429 Signed-off-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 4b14885411f7 ("nfsd: make all of the nfsd stats per-network namespace") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to start the reply cache before nfsd is up and running,
and doing so means that we register a shrinker for every net namespace
instead of just the ones where nfsd is running.
Move it to the per-net nfsd startup instead.
Reported-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: ed9ab7346e90 ("nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
select_local_address() and select_signal_address() both select an
endpoint entry from the list inside an RCU protected section, but return
a reference to it, to be read later on. If the entry is dereferenced
after the RCU unlock, reading info could cause a Use-after-Free.
A simple solution is to copy the required info while inside the RCU
protected section to avoid any risk of UaF later. The address ID might
need to be modified later to handle the ID0 case later, so a copy seems
OK to deal with.
Reported-by: Paolo Abeni <pabeni@redhat.com> Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.c, because quite a bit of new code has been
added around since commit 86e39e04482b ("mptcp: keep track of local
endpoint still available for each msk"), and commit 2843ff6f36db
("mptcp: remote addresses fullmesh"). But the issue is still there.
The conflicts have been resolved using the same way: by adding a new
parameter to select_local_address() and select_signal_address(), and
use it instead of the pointer they were previously returning. The code
is simpler in this version, this conflict resolution looks safe. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pr_debug() have been added in various places in MPTCP code to help
developers to debug some situations. With the dynamic debug feature, it
is easy to enable all or some of them, and asks users to reproduce
issues with extra debug.
Many of these pr_debug() don't end with a new line, while no 'pr_cont()'
are used in MPTCP code. So the goal was not to display multiple debug
messages on one line: they were then not missing the '\n' on purpose.
Not having the new line at the end causes these messages to be printed
with a delay, when something else needs to be printed. This issue is not
visible when many messages need to be printed, but it is annoying and
confusing when only specific messages are expected, e.g.
=> a delay of 5 seconds: printed with a 10.36 ts, but after 'restart'
which was printed at the 15.76 ts.
The 'Fixes' tag here below points to the first pr_debug() used without
'\n' in net/mptcp. This patch could be split in many small ones, with
different Fixes tag, but it doesn't seem worth it, because it is easy to
re-generate this patch with this simple 'sed' command:
At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and
then attach it to the transaction's list of pending snapshots. After that
we call btrfs_commit_transaction(), and if that returns an error we jump
to 'fail' label, where we kfree() the pending snapshot structure. This can
result in a later use-after-free of the pending snapshot:
1) We allocated the pending snapshot and added it to the transaction's
list of pending snapshots;
2) We call btrfs_commit_transaction(), and it fails either at the first
call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups().
In both cases, we don't abort the transaction and we release our
transaction handle. We jump to the 'fail' label and free the pending
snapshot structure. We return with the pending snapshot still in the
transaction's list;
3) Another task commits the transaction. This time there's no error at
all, and then during the transaction commit it accesses a pointer
to the pending snapshot structure that the snapshot creation task
has already freed, resulting in a user-after-free.
This issue could actually be detected by smatch, which produced the
following warning:
fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list
So fix this by not having the snapshot creation ioctl directly add the
pending snapshot to the transaction's list. Instead add the pending
snapshot to the transaction handle, and then at btrfs_commit_transaction()
we add the snapshot to the list only when we can guarantee that any error
returned after that point will result in a transaction abort, in which
case the ioctl code can safely free the pending snapshot and no one can
access it anymore.
CC: stable@vger.kernel.org # 5.10+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit a694291a6211 ("nilfs2: separate wait function from
nilfs_segctor_write") was applied, the log writing function
nilfs_segctor_do_construct() was able to issue I/O requests continuously
even if user data blocks were split into multiple logs across segments,
but two potential flaws were introduced in its error handling.
First, if nilfs_segctor_begin_construction() fails while creating the
second or subsequent logs, the log writing function returns without
calling nilfs_segctor_abort_construction(), so the writeback flag set on
pages/folios will remain uncleared. This causes page cache operations to
hang waiting for the writeback flag. For example,
truncate_inode_pages_final(), which is called via nilfs_evict_inode() when
an inode is evicted from memory, will hang.
Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared.
As a result, if the next log write involves checkpoint creation, that's
fine, but if a partial log write is performed that does not, inodes with
NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files"
list, and their data and b-tree blocks may not be written to the device,
corrupting the block mapping.
Fix these issues by uniformly calling nilfs_segctor_abort_construction()
on failure of each step in the loop in nilfs_segctor_do_construct(),
having it clean up logs and segment usages according to progress, and
correcting the conditions for calling nilfs_redirty_inodes() to ensure
that the NILFS_I_COLLECTED flag is cleared.
Link: https://lkml.kernel.org/r/20240814101119.4070-1-konishi.ryusuke@gmail.com Fixes: a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an error injection test of a routine for mount-time recovery, KASAN
found a use-after-free bug.
It turned out that if data recovery was performed using partial logs
created by dsync writes, but an error occurred before starting the log
writer to create a recovered checkpoint, the inodes whose data had been
recovered were left in the ns_dirty_files list of the nilfs object and
were not freed.
Fix this issue by cleaning up inodes that have read the recovery data if
the recovery routine fails midway before the log writer starts.
In sch_cake, we keep track of the count of active bulk flows per host,
when running in dst/src host fairness mode, which is used as the
round-robin weight when iterating through flows. The count of active
bulk flows is updated whenever a flow changes state.
This has a peculiar interaction with the hash collision handling: when a
hash collision occurs (after the set-associative hashing), the state of
the hash bucket is simply updated to match the new packet that collided,
and if host fairness is enabled, that also means assigning new per-host
state to the flow. For this reason, the bulk flow counters of the
host(s) assigned to the flow are decremented, before new state is
assigned (and the counters, which may not belong to the same host
anymore, are incremented again).
Back when this code was introduced, the host fairness mode was always
enabled, so the decrement was unconditional. When the configuration
flags were introduced the *increment* was made conditional, but
the *decrement* was not. Which of course can lead to a spurious
decrement (and associated wrap-around to U16_MAX).
AFAICT, when host fairness is disabled, the decrement and wrap-around
happens as soon as a hash collision occurs (which is not that common in
itself, due to the set-associative hashing). However, in most cases this
is harmless, as the value is only used when host fairness mode is
enabled. So in order to trigger an array overflow, sch_cake has to first
be configured with host fairness disabled, and while running in this
mode, a hash collision has to occur to cause the overflow. Then, the
qdisc has to be reconfigured to enable host fairness, which leads to the
array out-of-bounds because the wrapped-around value is retained and
used as an array index. It seems that syzbot managed to trigger this,
which is quite impressive in its own right.
This patch fixes the issue by introducing the same conditional check on
decrement as is used on increment.
The original bug predates the upstreaming of cake, but the commit listed
in the Fixes tag touched that code, meaning that this patch won't apply
before that.
Fixes: 712639929912 ("sch_cake: Make the dual modes fairer") Reported-by: syzbot+7fe7b81d602cc1e6b94d@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20240903160846.20909-1-toke@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory state around the buggy address: ffff88806461ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88806461ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888064620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^ ffff888064620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888064620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <tom@herbertland.com> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20240904144418.1162839-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In __tracing_open(), when max latency tracers took place on the cpu,
the time start of its buffer would be updated, then event entries with
timestamps being earlier than start of the buffer would be skipped
(see tracing_iter_reset()).
Softlockup will occur if the kernel is non-preemptible and too many
entries were skipped in the loop that reset every cpu buffer, so add
cond_resched() to avoid it.
Cc: stable@vger.kernel.org Fixes: 2f26ebd549b9a ("tracing: use timestamp to determine start of latency traces") Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mcp251x_hw_wake() function is called with the mpc_lock mutex held and
disables the interrupt handler so that no interrupts can be processed while
waking the device. If an interrupt has already occurred then waiting for
the interrupt handler to complete will deadlock because it will be trying
to acquire the same mutex.
Correct the pll postdiv shift used in clk_trion_pll_postdiv_set_rate
API. The shift value is not same for different types of plls and
should be taken from the pll's .post_div_shift member.
The existing code uses min_t(ssize_t, outarg.size, XATTR_LIST_MAX) when
parsing the FUSE daemon's response to a zero-length getxattr/listxattr
request.
On 32-bit kernels, where ssize_t and outarg.size are the same size, this is
wrong: The min_t() will pass through any size values that are negative when
interpreted as signed.
fuse_listxattr() will then return this userspace-supplied negative value,
which callers will treat as an error value.
This kind of bug pattern can lead to fairly bad security bugs because of
how error codes are used in the Linux kernel. If a caller were to convert
the numeric error into an error pointer, like so:
struct foo *func(...) {
int len = fuse_getxattr(..., NULL, 0);
if (len < 0)
return ERR_PTR(len);
...
}
then it would end up returning this userspace-supplied negative value cast
to a pointer - but the caller of this function wouldn't recognize it as an
error pointer (IS_ERR_VALUE() only detects values in the narrow range in
which legitimate errno values are), and so it would just be treated as a
kernel pointer.
I think there is at least one theoretical codepath where this could happen,
but that path would involve virtio-fs with submounts plus some weird
SELinux configuration, so I think it's probably not a concern in practice.
In the case where the aux writeback list is dropped (e.g. the pages
have been truncated or the connection is broken), the stats for
its pages and backing device info need to be updated as well.
Commit 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk") [1]
revealed the long living issue in dw_mmc.c driver, existing since the
time when it was first introduced in commit f95f3850f7a9 ("mmc: dw_mmc:
Add Synopsys DesignWare mmc host driver."), also making kernel boot
broken on platforms using dw_mmc driver with 16K or 64K pages enabled,
with this message in dmesg:
mmcblk: probe of mmc0:0001 failed with error -22
That's happening because mmc_blk_probe() fails when it calls
blk_validate_limits() consequently, which returns the error due to
failed max_segment_size check in this code:
/*
* The maximum segment size has an odd historic 64k default that
* drivers probably should override. Just like the I/O size we
* require drivers to at least handle a full page per segment.
*/
...
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
In case when IDMAC (Internal DMA Controller) is used, dw_mmc.c always
sets .max_seg_size to 4 KiB:
mmc->max_seg_size = 0x1000;
The comment in the code above explains why it's incorrect. Arnd
suggested setting .max_seg_size to .max_req_size to fix it, which is
also what some other drivers are doing:
This change is not only fixing the boot with 16K/64K pages, but also
leads to a better MMC performance. The linear write performance was
tested on E850-96 board (eMMC only), before commit [1] (where it's
possible to boot with 16K/64K pages without this fix, to be able to do
a comparison). It was tested with this command:
Unfortunately, SD card controller is not enabled in E850-96 yet, so it
wasn't possible for me to run the test on some cheap SD cards to check
this patch's impact on those. But it's possible that this change might
also reduce the writes count, thus improving SD/eMMC longevity.
All credit for the analysis and the suggested solution goes to Arnd.
Due to 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 there could be keys stored
with the wrong address type so this attempt to detect it and ignore them
instead of just failing to load all keys.
Cc: stable@vger.kernel.org Link: https://github.com/bluez/bluez/issues/875 Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org Link: https://github.com/bluez/bluez/issues/875 Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gicv2m_of_init() fails to perform an of_node_put() when
of_address_to_resource() fails, leading to a refcount leak.
Address this by moving the error handling path outside of the loop and
making it common to all failure modes.
Fixes: 4266ab1a8ff5 ("irqchip/gic-v2m: Refactor to prepare for ACPI support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240820092843.1219933-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ata_host_alloc(), if devres_alloc() fails to allocate the device host
resource data pointer, the already allocated ata_host structure is not
freed before returning from the function. This results in a potential
memory leak.
Call kfree(host) before jumping to the error handling path to ensure
that the ata_host structure is properly freed if devres_alloc() fails.
Fixes: 2623c7a5f279 ("libata: add refcounting to ata_host") Cc: stable@vger.kernel.org Signed-off-by: Zheng Qixing <zhengqixing@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lenovo V145 is having phase inverted dmic but simply applying inverted
dmic fixups does not work. Chaining up verb fixes for ALC283 enables
inverting dmic fixup to work properly.
The Sirius notebooks have two sets of speakers 0x17 (sides) and
0x1d (top center). The side speakers are active by default but
the top speakers aren't.
This patch provides a pincfg quirk to activate the top speakers.
kernel detects that snd_pcm_suspend_all() access a freed
'snd_soc_pcm_runtime' object when the system is suspended, which
leads to a use-after-free bug:
[ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270
[ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330
The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before
making any access. So we need to always set 'substream->runtime' to NULL
everytime we kfree() it.
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF
If cgroup_sk_alloc() is called from interrupt context, then just assign the
root cgroup to skcd->cgroup. Prior to commit 8520e224f547 ("bpf, cgroups:
Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later
on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and
iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather
than re-adding the NULL-test to the fast-path we can just assign it once from
cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from
NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp
directly does /not/ change behavior for callers of sock_cgroup_ptr().
syzkaller was able to trigger a splat in the legacy netrom code base, where
the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc()
and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL
skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects
a non-NULL object. There are a few other candidates aside from netrom which
have similar pattern where in their accept-like implementation, they just call
to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the
corresponding cgroup_sk_clone() which then inherits the cgroup from the parent
socket. None of them are related to core protocols where BPF cgroup programs
are running from. However, in future, they should follow to implement a similar
inheritance mechanism.
Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID
configuration, the same issue was exposed also prior to 8520e224f547 due to
commit e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated
cgroup") which added the early in_interrupt() return back then.
Replace IS_ENABLED() with IS_REACHABLE() to substitute empty stubs for:
i2c_acpi_get_i2c_resource()
i2c_acpi_client_count()
i2c_acpi_find_bus_speed()
i2c_acpi_new_device_by_fwnode()
i2c_adapter *i2c_acpi_find_adapter_by_handle()
i2c_acpi_waive_d0_probe()
commit f17c06c6608a ("i2c: Fix conditional for substituting empty ACPI
functions") partially fixed this conditional to depend on CONFIG_I2C,
but used IS_ENABLED(), which is wrong since CONFIG_I2C is tristate.
CONFIG_ACPI is boolean but let's also change it to use IS_REACHABLE()
to future-proof it against becoming tristate.
Somehow despite testing various combinations of CONFIG_I2C and CONFIG_ACPI
we missed the combination CONFIG_I2C=m, CONFIG_ACPI=y.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: f17c06c6608a ("i2c: Fix conditional for substituting empty ACPI functions") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408141333.gYnaitcV-lkp@intel.com/ Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we want to transition transaction commits to use ext4_writepages()
for writing back ordered, add handling of page redirtying into
ext4_bio_write_page(). Also move buffer dirty bit clearing into the same
place other buffer state handling.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221207112722.22220-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UDF disk format supports in principle file sizes up to 1<<64-1. However
the file space (including holes) is described by a linked list of
extents, each of which can have at most 1GB. Thus the creation and
handling of extents gets unusably slow beyond certain point. Limit the
file size to 4TB to avoid locking up the kernel too easily.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of buffer overflow in
show_rcu_tasks_trace_gp_kthread() if counters, passed
to sprintf() are huge. Counter numbers, needed for this
are unrealistically high, but buffer overflow is still
possible.
Use snprintf() with buffer size instead of sprintf().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: edf3775f0ad6 ("rcu-tasks: Add count for idle tasks on offline CPUs") Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Vamsi Krishna Brahmajosyula <vamsi-krishna.brahmajosyula@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The issue arises because virtio is assuming it's running in NAPI context
even when it's not, such as in the netpoll case.
To resolve this, modify virtnet_poll_tx() to only set NAPI when budget
is available. Same for virtnet_poll_cleantx(), which always assumed that
it was in a NAPI context.
Fixes: df133f3f9625 ("virtio_net: bulk free tx skbs") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Heng Qi <hengqi@linux.alibaba.com> Link: https://patch.msgid.link/20240712115325.54175-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Shivani: Modified to apply on v4.19.y-v5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Let's move the SOCK_RCU_FREE part up a bit, before we are inserting
the socket into hashtables. Note, that the race is really harmless;
the bpf callers are handling this situation (where listener socket
doesn't have SOCK_RCU_FREE set) correctly, so the only
annoyance is a WARN_ONCE.
More details from Eric regarding SOCK_RCU_FREE timeline:
Commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under
synflood") added SOCK_RCU_FREE. At that time, the precise location of
sock_set_flag(sk, SOCK_RCU_FREE) did not matter, because the thread calling
__inet_hash() owns a reference on sk. SOCK_RCU_FREE was only tested
at dismantle time.
Commit 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
started checking SOCK_RCU_FREE _after_ the lookup to infer whether
the refcount has been taken care of.
Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[Resolved conflict for 5.10 and below.] Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix cgroup v1 interference when non-root cgroup v2 BPF programs are used.
Back in the days, commit bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
embedded per-socket cgroup information into sock->sk_cgrp_data and in order
to save 8 bytes in struct sock made both mutually exclusive, that is, when
cgroup v1 socket tagging (e.g. net_cls/net_prio) is used, then cgroup v2
falls back to the root cgroup in sock_cgroup_ptr() (&cgrp_dfl_root.cgrp).
The assumption made was "there is no reason to mix the two and this is in line
with how legacy and v2 compatibility is handled" as stated in bd1060a1d671.
However, with Kubernetes more widely supporting cgroups v2 as well nowadays,
this assumption no longer holds, and the possibility of the v1/v2 mixed mode
with the v2 root fallback being hit becomes a real security issue.
Many of the cgroup v2 BPF programs are also used for policy enforcement, just
to pick _one_ example, that is, to programmatically deny socket related system
calls like connect(2) or bind(2). A v2 root fallback would implicitly cause
a policy bypass for the affected Pods.
In production environments, we have recently seen this case due to various
circumstances: i) a different 3rd party agent and/or ii) a container runtime
such as [0] in the user's environment configuring legacy cgroup v1 net_cls
tags, which triggered implicitly mentioned root fallback. Another case is
Kubernetes projects like kind [1] which create Kubernetes nodes in a container
and also add cgroup namespaces to the mix, meaning programs which are attached
to the cgroup v2 root of the cgroup namespace get attached to a non-root
cgroup v2 path from init namespace point of view. And the latter's root is
out of reach for agents on a kind Kubernetes node to configure. Meaning, any
entity on the node setting cgroup v1 net_cls tag will trigger the bypass
despite cgroup v2 BPF programs attached to the namespace root.
Generally, this mutual exclusiveness does not hold anymore in today's user
environments and makes cgroup v2 usage from BPF side fragile and unreliable.
This fix adds proper struct cgroup pointer for the cgroup v2 case to struct
sock_cgroup_data in order to address these issues; this implicitly also fixes
the tradeoffs being made back then with regards to races and refcount leaks
as stated in bd1060a1d671, and removes the fallback, so that cgroup v2 BPF
programs always operate as expected.
Metadata added by bio_integrity_prep is using plain kmalloc, which leads
to random kernel memory being written media. For PI metadata this is
limited to the app tag that isn't used by kernel generated metadata,
but for non-PI metadata the entire buffer leaks kernel memory.
Fix this by adding the __GFP_ZERO flag to allocations for writes.
Fixes: 7ba1ba12eeef ("block: Block layer data integrity support") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20240613084839.1044015-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct uvc_frame and interval (u32*) are packaged together on
streaming->formats on a single contiguous allocation.
Right now they are allocated right after uvc_format, without taking into
consideration their required alignment.
This is working fine because both structures have a field with a
pointer, but it will stop working when the sizeof() of any of those
structs is not a multiple of the sizeof(void*).
Callers can pass null in filter (i.e. from returned from the function
wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is
not the case.
This fixes 4 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Now that there are no indirect calls for PI processing there is no
way to dereference a NULL pointer here. Additionally drivers now always
freeze the queue (or in case of stacking drivers use their internal
equivalent) around changing the integrity profile.
This is effectively a revert of commit 3df49967f6f1 ("block: flush the
integrity workqueue in blk_integrity_unregister").
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240613084839.1044015-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiazi Li reported that they occasionally see hash table duplicates
as evidenced by the WARN_ON() in rb_insert_bss() in this code. It
isn't clear how that happens, nor have I been able to reproduce it,
but if it does happen, the kernel crashes later, when it tries to
unhash the entry that's now not hashed.
Try to make this situation more survivable by removing the BSS from
the list(s) as well, that way it's fully leaked here (as had been
the intent in the hash insert error path), and no longer reachable
through the list(s) so it shouldn't be unhashed again later.
This patch adds robust error handling to the meson_plane_create
function in drivers/gpu/drm/meson/meson_plane.c. The function
previously lacked proper handling for potential failure scenarios
of the drm_universal_plane_init call.
Currently, Smack mirrors the label of incoming tcp/ipv4 connections:
when a label 'foo' connects to a label 'bar' with tcp/ipv4,
'foo' always gets 'foo' in returned ipv4 packets. So,
1) returned packets are incorrectly labeled ('foo' instead of 'bar')
2) 'bar' can write to 'foo' without being authorized to write.
Here is a scenario how to see this:
* Take two machines, let's call them C and S,
with active Smack in the default state
(no settings, no rules, no labeled hosts, only builtin labels)
* At S, add Smack rule 'foo bar w'
(labels 'foo' and 'bar' are instantiated at S at this moment)
* At S, at label 'bar', launch a program
that listens for incoming tcp/ipv4 connections
* From C, at label 'foo', connect to the listener at S.
(label 'foo' is instantiated at C at this moment)
Connection succeedes and works.
* Send some data in both directions.
* Collect network traffic of this connection.
All packets in both directions are labeled with the CIPSO
of the label 'foo'. Hence, label 'bar' writes to 'foo' without
being authorized, and even without ever being known at C.
If anybody cares: exactly the same happens with DCCP.
This behavior 1st manifested in release 2.6.29.4 (see Fixes below)
and it looks unintentional. At least, no explanation was provided.
I changed returned packes label into the 'bar',
to bring it into line with the Smack documentation claims.
In some setups directories can have many (usually negative) dentries.
Hence __fsnotify_update_child_dentry_flags() function can take a
significant amount of time. Since the bulk of this function happens
under inode->i_lock this causes a significant contention on the lock
when we remove the watch from the directory as the
__fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask()
races with __fsnotify_update_child_dentry_flags() calls from
__fsnotify_parent() happening on children. This can lead upto softlockup
reports reported by users.
Fix the problem by calling fsnotify_update_children_dentry_flags() to
set PARENT_WATCHED flags only when parent starts watching children.
When parent stops watching children, clear false positive PARENT_WATCHED
flags lazily in __fsnotify_parent() for each accessed child.
Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
ucsi_register_altmode checks IS_ERR for the alt pointer and treats
NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled,
ucsi_register_displayport returns NULL which causes a NULL pointer
dereference in trace. Rather than return NULL, call
typec_port_register_altmode to register DisplayPort alternate mode
as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled.
Skip submitting URBs, when identical requests were already sent in
tweak_special_requests(). Instead call the completion handler directly
to return the result of the URB.
Even though submitting those requests twice should be harmless, there
are USB devices that react poorly to some duplicated requests.
One example is the ChipIdea controller implementation in U-Boot: The
second SET_CONFIGURATION request makes U-Boot disable and re-enable all
endpoints. Re-enabling an endpoint in the ChipIdea controller, however,
was broken until U-Boot commit b272c8792502 ("usb: ci: Fix gadget
reinit").
Address a warning about potential string truncation based on the
string buffer sizes. We can add some hints to the string format
specifier to set limits on the resulting possible string to
squelch the complaints.
When a remoteproc crashes or goes down unexpectedly this can result in
a state where locks held by the remoteproc will remain locked possibly
resulting in deadlock. This new API hwspin_lock_bust() allows
hwspinlock implementers to define a bust operation for freeing previously
acquired hwspinlocks after verifying ownership of the acquired lock.
If IORESOURCE_BUS is not provided in Device Tree it will be fabricated in
of_pci_parse_bus_range(), so NULL pointer dereference should not happen
here.
But that's hard to verify, so check for NULL anyway.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
fw_running assumes that memory can be retrieved only after alive.
This assumption is no longer true as we support dump before alive.
To avoid invalid access to the NIC, check that STATUS_DEVICE_ENABLED
bit in trans status is set before dumping instead of the prior check.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.ca07138cedeb.I090e31d3eaeb4ba19f5f84aba997ccd36927e9ac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check the input value for CUSTOM profile mode setting on legacy
SOCs. Otherwise we may use uninitalized value of input[]
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made
from __create_missing_ancestors(..) and 'ent->old' is NULL in
aa_replace_profiles(..).
In that case, it must return an error code and the code, -ENOENT represents
its state that the path of its parent is not existed yet.
Currently oem_id is defined as uint8_t[6] and casted to uint64_t*
in some use case. This would lead code scanner to complain about
access beyond. Re-define it in union to enforce 8-byte size and
alignment to avoid potential issue.
Signed-off-by: Michael Chen <michael.chen@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check the fb_channel_number range to avoid the array out-of-bounds
read error
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check the ring type value to fix the out-of-bounds
write warning
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Assign an default value to agc_btc_response in failed case
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY & HOW]
HDCP_MESSAGE_ID_INVALID (-1) is not a valid msg_id nor is it a valid
array index, and it needs checking before used.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY & HOW]
num_valid_sets needs to be checked to avoid a negative index when
accessing reader_wm_sets[num_valid_sets - 1].
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
