I struggle to explain dividing an ARRAY_SIZE() by the size of an element
once again. As the latter equals to 2, only the half of EEPROM was ever
written. Drop the unexplainable division and write full ARRAY_SIZE().
Cc: stable@vger.kernel.org Fixes: 7a8685accb95 ("leds: lp8860: Introduce TI lp8860 4 channel LED driver") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20241114101402.2562878-1-alexander.sverdlin@siemens.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver generates following warning when regulator support isn't
enabled in the kernel. Fix it.
drivers/cpufreq/s3c64xx-cpufreq.c: In function 's3c64xx_cpufreq_set_target':
>> drivers/cpufreq/s3c64xx-cpufreq.c:55:22: warning: variable 'old_freq' set but not used [-Wunused-but-set-variable]
55 | unsigned int old_freq, new_freq;
| ^~~~~~~~
>> drivers/cpufreq/s3c64xx-cpufreq.c:54:30: warning: variable 'dvfs' set but not used [-Wunused-but-set-variable]
54 | struct s3c64xx_dvfs *dvfs;
| ^~~~
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501191803.CtfT7b2o-lkp@intel.com/ Cc: 5.4+ <stable@vger.kernel.org> # v5.4+ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://patch.msgid.link/236b227e929e5adc04d1e9e7af6845a46c8e9432.1737525916.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
qdisc_tree_reduce_backlog() notifies parent qdisc only if child
qdisc becomes empty, therefore we need to reduce the backlog of the
child qdisc before calling it. Otherwise it would miss the opportunity
to call cops->qlen_notify(), in the case of DRR, it resulted in UAF
since DRR uses ->qlen_notify() to maintain its active list.
Fixes: f8d4bc455047 ("net/sched: netem: account for backlog updates from child qdisc") Cc: Martin Ottens <martin.ottens@fau.de> Reported-by: Mingi Cho <mincho@theori.io> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://patch.msgid.link/20250204005841.223511-4-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
xen_hypercall_hvm(), which is used when running as a Xen PVH guest at
most only once during early boot, is clobbering %rbx. Depending on
whether the caller relies on %rbx to be preserved across the call or
not, this clobbering might result in an early crash of the system.
This can be avoided by using an already saved register instead of %rbx.
Fixes: b4845bb63838 ("x86/xen: add central hypercall functions") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Firmware deinitialization performs MMIO accesses which are not
necessary if the device has already been removed. In some cases,
these accesses happen via readx_poll_timeout_atomic which ends up
timing out, resulting in a warning at hw_atl2_utils_fw.c:112:
The GPIO drivers with latch interrupt support (typically types starting
with PCAL) have interrupt status registers to determine which particular
inputs have caused an interrupt. Unfortunately there is no atomic
operation to read these registers and clear the interrupt. Clearing the
interrupt is done by reading the input registers.
The code was reading the interrupt status registers, and then reading
the input registers. If an input changed between these two events it was
lost.
The solution in this patch is to revert to the non-latch version of
code, i.e. remembering the previous input status, and looking for the
changes. This system results in no more I2C transfers, so is no slower.
The latch property of the device still means interrupts will still be
noticed if the input changes back to its initial state.
Fixes: 44896beae605 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240606033102.2271916-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 4094871db1d6 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1d6 ("udp: only do GSO if # of segs > 1") Signed-off-by: Yan Zhai <yan@cloudflare.com> Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Disable PCIe AER on the tg3 device on system reboot on a limited
list of Dell PowerEdge systems. This prevents a fatal PCIe AER event
on the tg3 device during the ACPI _PTS (prepare to sleep) method for
S5 on those systems. The _PTS is invoked by acpi_enter_sleep_state_prep()
as part of the kernel's reboot sequence as a result of commit 38f34dba806a ("PM: ACPI: reboot: Reinstate S5 for reboot").
There was an earlier fix for this problem by commit 2ca1c94ce0b6
("tg3: Disable tg3 device on system reboot to avoid triggering AER").
But it was discovered that this earlier fix caused a reboot hang
when some Dell PowerEdge servers were booted via ipxe. To address
this reboot hang, the earlier fix was essentially reverted by commit 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF").
This re-exposed the tg3 PCIe AER on reboot problem.
This fix is not an ideal solution because the root cause of the AER
is in system firmware. Instead, it's a targeted work-around in the
tg3 driver.
Note also that the PCIe AER must be disabled on the tg3 device even
if the system is configured to use "firmware first" error handling.
V3:
- Fix sparse warning on improper comparison of pdev->current_state
- Adhere to netdev comment style
Fixes: 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF") Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the hotplug detect of a display is low for longer than one second
(configurable through drm_dp_cec_unregister_delay), then the CEC adapter
is unregistered since we assume the display was disconnected. If the
HPD went low for less than one second, then we check if the properties
of the CEC adapter have changed, since that indicates that we actually
switch to new hardware and we have to unregister the old CEC device and
register a new one.
Unfortunately, the test for changed properties was written poorly, and
after a new CEC capability was added to the CEC core code the test always
returned true (i.e. the properties had changed).
As a result the CEC device was unregistered and re-registered for every
HPD toggle. If the CEC remote controller integration was also enabled
(CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was
also unregistered and re-registered. As a result the input device in
/sys would keep incrementing its number, e.g.:
Since short HPD toggles are common, the number could over time get into
the thousands.
While not a serious issue (i.e. nothing crashes), it is not intended
to work that way.
This patch changes the test so that it only checks for the single CEC
capability that can actually change, and it ignores any other
capabilities, so this is now safe as well if new caps are added in
the future.
With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be
dropped as well, so that's a nice cleanup.
When the set feature attempts fails with any NVME status code set in
nvme_set_queue_count, the function still report success. Though the
numbers of queues set to 0. This is done to support controllers in
degraded state (the admin queue is still up and running but no IO
queues).
Though there is an exception. When nvme_set_features reports an host
path error, nvme_set_queue_count should propagate this error as the
connectivity is lost, which means also the admin queue is not working
anymore.
Fixes: 9a0be7abb62f ("nvme: refactor set_queue_count") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a command is queued to the final usable TRB of a ring segment, the
enqueue pointer is advanced to the subsequent link TRB and no further.
If the command is later aborted, when the abort completion is handled
the dequeue pointer is advanced to the first TRB of the next segment.
If no further commands are queued, xhci_handle_stopped_cmd_ring() sees
the ring pointers unequal and assumes that there is a pending command,
so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL.
Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell
ring likely is unnecessary too, but it's harmless. Leave it alone.
This is probably Bug 219532, but no confirmation has been received.
The issue has been independently reproduced and confirmed fixed using
a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever.
Everything continued working normally after several prevented crashes.
- The HCD address_device callback now accepts a user-defined timeout value
in milliseconds, providing better control over command execution times.
- The default timeout value for the address_device command has been set
to 5000 ms, aligning with the USB 3.2 specification. However, this
timeout can be adjusted as needed.
- The xhci_setup_device function has been updated to accept the timeout
value, allowing it to specify the maximum wait time for the command
operation to complete.
- The hub driver has also been updated to accommodate the newly added
timeout parameter during the SET_ADDRESS request.
Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.
For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.
Per the "Processor Specification Update" documentations referred by
the intel-microcode-20240312 release note, this microcode release has
fixed the issue for all affected models.
So don't disable PCID if the microcode is new enough. The precise
minimum microcode revision fixing the issue was provided by Pawan
Intel.
The F11 key on the new Lenovo Thinkpad T14 Gen 5, T16 Gen 3, and P14s
Gen 5 laptops includes a symbol showing a smartphone and a laptop
chained together. According to the user manual, it starts the Microsoft
Phone Link software used to connect to Android/iOS devices and relay
messages/calls or sync data.
As there are no suitable keycodes for this action, introduce a new one.
On a 32bit system the "keylen + sizeof(struct tipc_aead_key)" math could
have an integer wrapping issue. It doesn't matter because the "keylen"
is checked on the next line, but just to make life easier for static
analysis tools, let's re-order these conditions and avoid the integer
overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Qualcomm regulator supports two power supply modes: HPM and LPM.
Currently, the sdhci-msm.c driver does not set the load to adjust
the current for eMMC and SD. If the regulator dont't set correct
load in LPM state, it will lead to the inability to properly
initialize eMMC and SD.
Set the correct regulator current for eMMC and SD to ensure that the
device can work normally even when the regulator is in LPM.
The GHES driver overrides the panic= setting by force-rebooting the
system after a fatal hw error has been reported. The intent being that
such an error would be reported earlier.
However, this is not optimal when a hard-to-debug issue requires long
time to reproduce and when that happens, the box will get rebooted after
30 seconds and thus destroy the whole hw context of when the error
happened.
So rip out the default GHES panic timeout and honor the global one.
In the panic disabled (panic=0) case, the error will still be logged to
dmesg for later inspection and if panic after a hw error is really
required, then that can be controlled the usual way - use panic= on the
cmdline or set it in the kernel .config's CONFIG_PANIC_TIMEOUT.
Reported-by: Feng Tang <feng.tang@linux.alibaba.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Feng Tang <feng.tang@linux.alibaba.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://patch.msgid.link/20250113125224.GFZ4UMiNtWIJvgpveU@fat_crate.local Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a 400KHz freq is used on this model of ELAN touchpad in Linux,
excessive smoothing (similar to when the touchpad's firmware detects
a noisy signal) is sometimes applied. As some devices' (e.g, Lenovo
V15 G4) ACPI tables specify a 400KHz frequency for this device and
some I2C busses (e.g, Designware I2C) default to a 400KHz freq,
force the speed to 100KHz as a workaround.
For future investigation: This problem may be related to the default
HCNT/LCNT values given by some busses' drivers, because they are not
specified in the aforementioned devices' ACPI tables, and because
the device works without issues on Windows at what is expected to be
a 400KHz frequency. The root cause of the issue is not known.
Signed-off-by: Randolph Ha <rha051117@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The overflow_work is using system wq to do overflow checks and updates
for PHC device timecounter, which might be overhelmed by other tasks.
But there is dedicated kthread in PTP subsystem designed for such
things. This patch changes the work queue to proper align with PTP
subsystem and to avoid overloading system work queue.
The adjfine() function acts the same way as overflow check worker,
we can postpone ptp aux worker till the next overflow period after
adjfine() was called.
syzbot is reporting too large allocation warning at tomoyo_write_control(),
for one can write a very very long line without new line character. To fix
this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE,
for practically a valid line should be always shorter than 32KB where the
"too small to fail" memory-allocation rule applies.
One might try to write a valid line that is longer than 32KB, but such
request will likely fail with -ENOMEM. Therefore, I feel that separately
returning -EINVAL when a line is longer than KMALLOC_MAX_SIZE is redundant.
There is no need to distinguish over-32KB and over-KMALLOC_MAX_SIZE.
Reported-by: syzbot+7536f77535e5210a5c76@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7536f77535e5210a5c76 Reported-by: Leo Stone <leocstone@gmail.com> Closes: https://lkml.kernel.org/r/20241216021459.178759-2-leocstone@gmail.com Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Sasha Levin <sashal@kernel.org>
In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
The card-quirk was added to limit the clock-rate for a card with UHS-mode
support, although let's respect the quirk for non-UHS mode too, to make the
behaviour consistent.
Currently tun checks the group permission even if the user have matched.
Besides going against the usual permission semantic, this has a
very interesting implication: if the tun group is not among the
supplementary groups of the tun user, then effectively no one can
access the tun device. CAP_SYS_ADMIN still can, but its the same as
not setting the tun ownership.
This patch relaxes the group checking so that either the user match
or the group match is enough. This avoids the situation when no one
can access the device even though the ownership is properly set.
Also I simplified the logic by removing the redundant inversions:
tun_not_capable() --> !tun_capable()
Signed-off-by: Stas Sergeev <stsp2@yandex.ru> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241205073614.294773-1-stsp2@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot attempts to write a buffer with a large size to a sysfs entry
with writes handled by handle_policy_update(), triggering a warning
in kmalloc.
Check the size specified for write buffers before allocating.
Reported-by: syzbot+4eb7a741b3216020043a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4eb7a741b3216020043a Signed-off-by: Leo Stone <leocstone@gmail.com>
[PM: subject tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which
leads to undefined behavior. To prevent this, cast 1 to u32 before
performing the shift, ensuring well-defined behavior.
This change explicitly avoids any potential overflow by ensuring that
the shift occurs on an unsigned 32-bit integer.
Lockdep has a set of configs used to determine the size of the static
arrays that it uses. However, the upper limit that was initially setup
for these configs is too high (30 bit shift). This equates to several
GiB of static memory for individual symbols. Using such high values
leads to linker errors:
$ make defconfig
$ ./scripts/config -e PROVE_LOCKING --set-val LOCKDEP_BITS 30
$ make olddefconfig all
[...]
ld: kernel image bigger than KERNEL_IMAGE_SIZE
ld: section .bss VMA wraps around address space
Adjust the upper limits to the maximum values that avoid these issues.
The need for anything more, likely points to a problem elsewhere. Note
that LOCKDEP_CHAINS_BITS was intentionally left out as its upper limit
had a different symptom and has already been fixed [1].
Reported-by: J. R. Okajima <hooanon05g@gmail.com> Closes: https://lore.kernel.org/all/30795.1620913191@jrobl/ [1] Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20241024183631.643450-2-cmllamas@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When steal time exceeds the measured delta when updating clock_task, we
currently try to catch up the excess in future updates.
However, this results in inaccurate run times for the future things using
clock_task, in some situations, as they end up getting additional steal
time that did not actually happen.
This is because there is a window between reading the elapsed time in
update_rq_clock() and sampling the steal time in update_rq_clock_task().
If the VCPU gets preempted between those two points, any additional
steal time is accounted to the outgoing task even though the calculated
delta did not actually contain any of that "stolen" time.
When this race happens, we can end up with steal time that exceeds the
calculated delta, and the previous code would try to catch up that excess
steal time in future clock updates, which is given to the next,
incoming task, even though it did not actually have any time stolen.
This behavior is particularly bad when steal time can be very long,
which we've seen when trying to extend steal time to contain the duration
that the host was suspended [0]. When this happens, clock_task stays
frozen, during which the running task stays running for the whole
duration, since its run time doesn't increase.
However the race can happen even under normal operation.
Ideally we would read the elapsed cpu time and the steal time atomically,
to prevent this race from happening in the first place, but doing so
is non-trivial.
Since the time between those two points isn't otherwise accounted anywhere,
neither to the outgoing task nor the incoming task (because the "end of
outgoing task" and "start of incoming task" timestamps are the same),
I would argue that the right thing to do is to simply drop any excess steal
time, in order to prevent these issues.
This BUG_ON is meant to catch backref cache problems, but these can
arise from either bugs in the backref cache or corruption in the extent
tree. Fix it to be a proper error.
Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we are trying to join the current transaction and if it's aborted,
we read its 'aborted' field after unlocking fs_info->trans_lock and
without holding any extra reference count on it. This means that a
concurrent task that is aborting the transaction may free the transaction
before we read its 'aborted' field, leading to a use-after-free.
Fix this by reading the 'aborted' field while holding fs_info->trans_lock
since any freeing task must first acquire that lock and set
fs_info->running_transaction to NULL before freeing the transaction.
This was reported by syzbot and Dmitry with the following stack traces
from KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278
Read of size 4 at addr ffff888011839024 by task kworker/u4:9/1128
The buggy address belongs to the object at ffff888011839000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 36 bytes inside of
freed 2048-byte region [ffff888011839000, ffff888011839800)
Memory state around the buggy address: ffff888011838f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888011838f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888011839000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff888011839080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888011839100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
There is a recent ML report that mounting a large fs backed by hardware
RAID56 controller (with one device missing) took too much time, and
systemd seems to kill the mount attempt.
In that case, the only error message is:
BTRFS error (device sdj): open_ctree failed
There is no reason on why the failure happened, making it very hard to
understand the reason.
At least output the error number (in the particular case it should be
-EINTR) to provide some clue.
Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/ Reported-by: Christoph Anton Mitterer <calestyo@scientia.org> Cc: stable@vger.kernel.org Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't prematurely free the command. Wait for the status completion of
the sense status. It can be freed then. Otherwise we will double-free
the command.
If the uvc_status_init() function fails to allocate the int_urb, it will
free the dev->status pointer but doesn't reset the pointer to NULL. This
results in the kfree() call in uvc_status_cleanup() trying to
double-free the memory. Fix it by resetting the dev->status pointer to
NULL after freeing it.
Fixes: a31a4055473b ("V4L/DVB:usbvideo:don't use part of buffer for USB transfer #4") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20241107235130.31372-1-laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A report in 2019 by the syzbot fuzzer was found to be connected to two
errors in the HID core associated with Resolution Multipliers. One of
the errors was fixed by commit ea427a222d8b ("HID: core: Fix deadloop
in hid_apply_multiplier."), but the other has not been fixed.
This error arises because hid_apply_multipler() assumes that every
Resolution Multiplier control is contained in a Logical Collection,
i.e., there's no way the routine can ever set multiplier_collection to
NULL. This is in spite of the fact that the function starts with a
big comment saying:
* "The Resolution Multiplier control must be contained in the same
* Logical Collection as the control(s) to which it is to be applied.
...
* If no Logical Collection is
* defined, the Resolution Multiplier is associated with all
* controls in the report."
* HID Usage Table, v1.12, Section 4.3.1, p30
*
* Thus, search from the current collection upwards until we find a
* logical collection...
The comment and the code overlook the possibility that none of the
collections found may be a Logical Collection.
The fix is to set the multiplier_collection pointer to NULL if the
collection found isn't a Logical Collection.
Reported-by: syzbot+ec5f884c4a135aa0dbb9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000109c040597dc5843@google.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Peter Hutterer <peter.hutterer@who-t.net> Fixes: 5a4abb36f312 ("HID: core: process the Resolution Multiplier") Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As PD2.0 spec ("8.3.3.2.3 PE_SRC_Send_Capabilities state"), after the
Source receives the GoodCRC Message from the Sink in response to the
Source_Capabilities message, it should start the SenderResponseTimer,
after the timer times out, the state machine transitions to the
HARD_RESET state.
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Signed-off-by: Jos Wang <joswang@lenovo.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20250105135245.7493-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit reintroduces interrupt-based card detection previously
used in the rts5139 driver. This functionality was removed in commit 00d8521dcd23 ("staging: remove rts5139 driver code").
Reintroducing this mechanism fixes presence detection for certain card
readers, which with the current driver, will taken approximately 20
seconds to enter S3 as `mmc_rescan` has to be frozen.
In the case of a test that uses the special option ${KERNEL_VERSION} in one
of its settings but has no configuration available in ${OUTPUT_DIR}, for
example if it's a new empty directory, then the `make kernelrelease` call
will fail and the subroutine will chomp an empty string, silently. Fix that
by adding an empty configuration and retrying.
Cc: stable@vger.kernel.org Cc: John Hawley <warthog9@eaglescrag.net> Fixes: 5f9b6ced04a4e ("ktest: Bisecting, install modules, add logging") Link: https://lore.kernel.org/20241205-ktest_kver_fallback-v2-1-869dae4c7777@suse.com Signed-off-by: Ricardo B. Marliere <rbm@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field length description provides the length of each separated key
field in the concatenation, each field gets rounded up to 32-bits to
calculate the pipapo rule width from pipapo_init(). The set key length
provides the total size of the key aligned to 32-bits.
Register-based arithmetics still allows for combining mismatching set
key length and field length description, eg. set key length 10 and field
description [ 5, 4 ] leading to pipapo width of 12.
Cc: stable@vger.kernel.org Fixes: 3ce67e3793f4 ("netfilter: nf_tables: do not allow mismatch field size and set key length") Reported-by: Noam Rathaus <noamr@ssd-disclosure.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I noticed that once an NFSv4.1 callback operation gets a
NFS4ERR_DELAY status on CB_SEQUENCE and then the connection is lost,
the callback client loops, resending it indefinitely.
The switch arm in nfsd4_cb_sequence_done() that handles
NFS4ERR_DELAY uses rpc_restart_call() to rearm the RPC state machine
for the retransmit, but that path does not call the rpc_prepare_call
callback again. Thus cb_seq_status is set to -10008 by the first
NFS4ERR_DELAY result, but is never set back to 1 for the retransmits.
nfsd4_cb_sequence_done() thinks it's getting nothing but a
long series of CB_SEQUENCE NFS4ERR_DELAY replies.
Fixes: 7ba6cad6c88f ("nfsd: New helper nfsd4_cb_sequence_done() for processing more cb errors") Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
die executes holding the spinlock of &die.lock and unlock
it after printing the oops message.
However in the code if the notify_die() returns NOTIFY_STOP
, die() exit with returning 1 but never unlocked the spinlock.
Fix this by adding spin_unlock_irq(&die.lock) before returning.
Fixes: cf9750bae262 ("Hexagon: Provide basic debugging and system trap support.") Signed-off-by: Lin Yujun <linyujun809@huawei.com> Link: https://lore.kernel.org/r/20230522025608.2515558-1-linyujun809@huawei.com Signed-off-by: Brian Cain <bcain@quicinc.com> Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While hexagon's cmpxchg assigns an integer value to a variable of this
type.
__typeof__(*(ptr)) __oldval = 0;
Update this assignment to cast 0 to the correct type.
The original issue is easily reproduced at head with the below block,
and is absent after this change.
make LLVM=1 ARCH=hexagon defconfig
make C=1 LLVM=1 ARCH=hexagon net/ipv4/inet_diag.o
Fixes: 99a70aa051d2 ("Hexagon: Add processor and system headers") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411091538.PGSTqUBi-lkp@intel.com/ Signed-off-by: Willem de Bruijn <willemb@google.com> Tested-by: Christian Gmeiner <cgmeiner@igalia.com> Link: https://lore.kernel.org/r/20241203221736.282020-1-willemdebruijn.kernel@gmail.com Signed-off-by: Brian Cain <bcain@quicinc.com> Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a symbol that is already registered is read again from *.symref
file, __add_symbol() removes the previous one from the hash table without
freeing it.
When a symbol is removed from the hash table, it must be freed along
with its ->name and ->defn members. However, sym->name cannot be freed
because it is sometimes shared with node->string, but not always. If
sym->name and node->string share the same memory, free(sym->name) could
lead to a double-free bug.
To resolve this issue, always assign a strdup'ed string to sym->name.
The memory leaks in Test Case 1 and 2 have existed since the introduction
of genksyms into the kernel tree. [1]
The memory leak in Test Case 3 was introduced by commit 5dae9a550a74
("genksyms: allow to ignore symbol checksum changes").
When multiple init_declarators are reduced to an init_declarator_list,
the decl_spec must be duplicated. Otherwise, the following Test Case 4
would result in a double-free bug.
[Test Case 4]
$ cat foo.c
#include <linux/export.h>
extern int foo, bar;
int foo, bar;
EXPORT_SYMBOL(foo);
In this case, 'foo' and 'bar' share the same decl_spec, 'int'. It must
be unshared before being passed to add_symbol().
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to sh_eth_close, sh_eth_open and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
bgmac allocates new replacement buffer before handling each received
frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
time. Ideally bgmac should just respect currently set MTU but it isn't
the case right now. For now just revert back to the old limited frame
size.
This change bumps NAT masquerade speed by ~95%.
Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for
page_frag_alloc_align()"), the bgmac driver fails to open its network
interface successfully and runs out of memory in the following call
stack:
So in that case we do indeed have offset + fragsz (40192) > size (32768)
and so we would eventually return NULL. Reverting to the older 1500
bytes MTU allows the network driver to be usable again.
Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[florian: expand commit message about recent commits] Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
sk_err is set when a (connectible) connect() fails. Effectively, this makes
an otherwise still healthy SS_UNCONNECTED socket impossible to use for any
subsequent connection attempts.
Clear sk_err upon trying to establish a connection.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-2-1cf57065b770@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
libtraceevent parses and returns an array of argument fields, sometimes
larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr",
idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6
elements max, creating an out-of-bounds access. This runtime error is
found by UBsan. The error message:
$ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1
builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]'
#0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966
#1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110
#2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436
#3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897
#4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335
#5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502
#6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351
#7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404
#8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448
#9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556
#10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
#11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360
#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6)
dm is netdev private data and it cannot be
used after free_netdev() call. Using dm after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
This is similar to the issue fixed in commit ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove").
This bug is detected by our static analysis tool.
Fixes: cf9e60aa69ae ("net: davicom: Fix regulator not turned off on driver removal") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> CC: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20250123214213.623518-1-chenyuan0y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In hibernation_platform_enter(), the code did not check the
return value of syscore_suspend(), potentially leading to a
situation where syscore_resume() would be called even if
syscore_suspend() failed. This could cause unpredictable
behavior or system instability.
Modify the code sequence in question to properly handle errors returned
by syscore_suspend(). If an error occurs in the suspend path, the code
now jumps to label 'Enable_irqs' skipping the syscore_resume() call and
only enabling interrupts after setting the system state to SYSTEM_RUNNING.
syzbot found that calling mr_mfc_uses_dev() for unres entries
would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif
alias to "struct sk_buff_head unresolved", which contain two pointers.
This code never worked, lets remove it.
[1]
Unable to handle kernel paging request at virtual address ffff5fff2d536613
KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f]
Modules linked in:
CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline]
pc : mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334
lr : mr_mfc_uses_dev net/ipv4/ipmr_base.c:289 [inline]
lr : mr_table_dump+0x694/0x8b0 net/ipv4/ipmr_base.c:334
Call trace:
mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] (P)
mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 (P)
mr_rtm_dumproute+0x254/0x454 net/ipv4/ipmr_base.c:382
ipmr_rtm_dumproute+0x248/0x4b4 net/ipv4/ipmr.c:2648
rtnl_dump_all+0x2e4/0x4e8 net/core/rtnetlink.c:4327
rtnl_dumpit+0x98/0x1d0 net/core/rtnetlink.c:6791
netlink_dump+0x4f0/0xbc0 net/netlink/af_netlink.c:2317
netlink_recvmsg+0x56c/0xe64 net/netlink/af_netlink.c:1973
sock_recvmsg_nosec net/socket.c:1033 [inline]
sock_recvmsg net/socket.c:1055 [inline]
sock_read_iter+0x2d8/0x40c net/socket.c:1125
new_sync_read fs/read_write.c:484 [inline]
vfs_read+0x740/0x970 fs/read_write.c:565
ksys_read+0x15c/0x26c fs/read_write.c:708
Fixes: cb167893f41e ("net: Plumb support for filtering ipv4 and ipv6 multicast route dumps") Reported-by: syzbot+5cfae50c0e5f2c500013@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/678fe2d1.050a0220.15cac.00b3.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250121181241.841212-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Implement cleanup of descriptors in the TSO error path of
fec_enet_txq_submit_tso(). The cleanup
- Unmaps DMA buffers for data descriptors skipping TSO header
- Clears all buffer descriptors
- Handles extended descriptors by clearing cbd_esc when enabled
When unload hclge driver, it tries to disable sriov first for each
ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at
the time, because it removes all the ae_dev nodes, and it may cause
oops.
But we can't simply use hnae3_common_lock for this. Because in the
process flow of pci_disable_sriov(), it will trigger the remove flow
of VF, which will also take hnae3_common_lock.
To fixes it, introduce a new mutex to protect the unload process.
Clearing slab cache will free all znode in memory and make
c->zroot.znode = NULL, then dumping tnc tree will access
c->zroot.znode which cause null pointer dereference.
The nvmem interface supports variable buffer sizes, while the regmap
interface operates with fixed-size storage. If an nvmem client uses a
buffer size less than 4 bytes, regmap_read will write out of bounds
as it expects the buffer to point at an unsigned int.
Fix this by using an intermediary unsigned int to hold the value.
When skb needs GSO and wrap around happens, if xo->seq.low (seqno of
the first skb segment) is before the last seq number but oseq (seqno
of the last segment) is after it, xo->seq.low is still bigger than
replay_esn->oseq while oseq is smaller than it, so the update of
replay_esn->oseq_hi is missed for this case wrap around because of
the change in the cited commit.
For example, if sending a packet with gso_segs=3 while old
replay_esn->oseq=0xfffffffe, we calculate:
xo->seq.low = 0xfffffffe + 1 = 0x0xffffffff
oseq = 0xfffffffe + 3 = 0x1
(oseq < replay_esn->oseq) is true, but (xo->seq.low <
replay_esn->oseq) is false, so replay_esn->oseq_hi is not incremented.
To fix this issue, change the outer checking back for the update of
replay_esn->oseq_hi. And add new checking inside for the update of
packet's oseq_hi.
Fixes: 4b549ccce941 ("xfrm: replay: Fix ESN wrap around for GSO") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
dereference_symbol_descriptor() needs to obtain the module pointer
belonging to pointer in order to resolve that pointer.
The returned mod pointer is obtained under RCU-sched/ preempt_disable()
guarantees and needs to be used within this section to ensure that the
module is not removed in the meantime.
Extend the preempt_disable() section to also cover
dereference_module_function_descriptor().
Fixes: 04b8eb7a4ccd9 ("symbol lookup: introduce dereference_symbol_descriptor()") Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Helge Deller <deller@gmx.de> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20250108090457.512198-2-bigeasy@linutronix.de Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While running fstests generic/329, the kernel workqueue
quota_release_workfn is dead looping in calling ocfs2_release_dquot().
The ocfs2 state is already readonly but ocfs2_release_dquot wants to
start a transaction but fails and returns.
=====================================================================
[ 2918.123602 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
[ 2918.124034 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:765
ERROR: status = -30
[ 2918.124452 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:795
ERROR: status = -30
[ 2918.124883 ][ T275 ] (kworker/u135:1,275,11):ocfs2_start_trans:357
ERROR: status = -30
[ 2918.125276 ][ T275 ] OCFS2: abort (device dm-0): ocfs2_start_trans:
Detected aborted journal
[ 2918.125710 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
=====================================================================
ocfs2_release_dquot() is much like dquot_release(), which is called by
ext4 to handle similar situation. So here fix it by marking the dquot as
inactive like what dquot_release() does.
Link: https://lkml.kernel.org/r/20250106140653.92292-1-glass.su@suse.com Fixes: 9e33d69f553a ("ocfs2: Implementation of local and global quota file handling") Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rcar_pcie_parse_outbound_ranges() uses the devm_request_mem_region()
macro to request a needed resource. A string variable that lives on the
stack is then used to store a dynamically computed resource name, which
is then passed on as one of the macro arguments. This can lead to
undefined behavior.
Depending on the current contents of the memory, the manifestations of
errors may vary. One possible output may be as follows:
In very rare cases, if no NULL-terminator is found in memory, the system
might crash because the string iterator will overrun which can lead to
access of unmapped memory above the stack.
Thus, fix this by replacing outbound_name with the name of the previously
requested resource. With the changes applied, the output will be as
follows:
imx_media_add_of_subdevs() calls of_parse_phandle() and passes the
obtained node to imx_media_of_add_csi(). The passed node is used in
v4l2_async_nf_add_fwnode(), which increments the refcount of the node.
Therefore, while the current implementation only releases the node when
imx_media_of_add_csi() fails, but should always release it. Call
of_node_put() right after imx_media_of_add_csi().
Fixes: dee747f88167 ("media: imx: Don't register IPU subdevs/links if CSI port missing") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
In am654_hbmc_platform_driver, .remove() and the error path of .probe()
do not decrement the refcount of an OF node obtained by
of_get_next_child(). Fix this by adding of_node_put() calls.
Now we return VB2_BUF_STATE_DONE for valid and invalid frames. Propagate
the correct value, so the user can know if the frame is valid or not via
struct v4l2_buffer->flags.
Reported-by: Hans de Goede <hdegoede@redhat.com> Closes: https://lore.kernel.org/linux-media/84b0f212-cd88-46bb-8e6f-b94ec3eccba6@redhat.com Fixes: 6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241218-uvc-deprecate-v2-1-ab814139e983@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The devm_pci_epc_destroy() comment says destroys the EPC device, but it
does not actually do that since devres_destroy() does not call
devm_pci_epc_release(), and it also can not fully undo what the API
devm_pci_epc_create() does, so it is faulty.
Fortunately, the faulty API has not been used by current kernel tree. Use
devres_release() instead of devres_destroy() so the EPC device will be
released.
Link: https://lore.kernel.org/r/20241210-pci-epc-core_fix-v3-1-4d86dd573e4b@quicinc.com Fixes: 5e8cb4033807 ("PCI: endpoint: Add EP core layer to enable EP controller and EP functions") Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
lme2510_int_read is not atomically called so use GFP_KERNEL for
usb_alloc_urb and usb_submit_urb which is the first in the chain
of interrupt submissions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: a2836d3fe220 ("media: lmedm04: Handle errors for lme2510_int_read") Signed-off-by: Sasha Levin <sashal@kernel.org>
dss_of_port_get_parent_device() leaks an OF node reference when i >= 2
and struct device_node *np is present. Since of_get_next_parent()
obtains a reference of the returned OF node, call of_node_put() before
returning NULL.
This was found by an experimental verifier that I am developing, and no
runtime test was able to be performed due to that lack of actual
devices.
Fix following validation error:
arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: cir@10013000: $nodename:0: 'cir@10013000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
Fixes: 91044f38dae7 ("arm: dts: mt7623: add ir nodes to the mt7623.dtsi file") Cc: linux-media@vger.kernel.org Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20240617094634.23173-1-zajec5@gmail.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SM8250 platform uses PM8150 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 9ff8b0591fcf ("arm64: dts: qcom: sm8250: use the right clock-freqency for sleep-clk") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-13-e9b08fbeadd3@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MSM8994 platform uses PM8994/6 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
The MSM8916 platform uses PM8916 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It is also not listed in the MT6397
regulator bindings. Having them present produces a whole bunch of
validation errors:
Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 689b937bedde ("arm64: dts: mediatek: add mt8173 elm and hana board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241211052427.4178367-4-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It is also not listed in the MT6397
regulator bindings. Having them present produces a whole bunch of
validation errors:
Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 16ea61fc5614 ("arm64: dts: mt8173-evb: Add PMIC support") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241211052427.4178367-3-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len + sizeof(struct
cpl_pass_accept_req) + sizeof(struct rss_header)" addition could have an
integer wrapping bug. Use size_add() to prevent this.
Fixes: 1cab775c3e75 ("RDMA/cxgb4: Fix LE hash collision bug for passive open connection") Link: https://patch.msgid.link/r/86b404e1-4a75-4a35-a34e-e3054fa554c7@stanley.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch generates the following false error report:
drivers/infiniband/hw/mlx4/main.c:393 mlx4_ib_del_gid() error: uninitialized symbol 'gids'.
Traditionally, we are not changing kernel code and asking people to fix
the tools. However in this case, the fix can be done by simply rearranging
the code to be more clear.
The Android DTB for the related MT8167 reserves 0x30000. This is likely
correct for MT8516 Android devices as well, and there's never any harm
in reserving 64KiB more.
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516") Signed-off-by: Val Packett <val@packett.cool> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241204190524.21862-5-val@packett.cool Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the clock-div property from the pumpkin board dtsi to the SoC's
since it belongs to the SoC itself and is required on other devices.
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516") Signed-off-by: Val Packett <val@packett.cool> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241204190524.21862-4-val@packett.cool Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
