The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
The reference counting issue happens in several exception handling paths
of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the
function forgets to decrease the refcount of "smmu" increased by
arm_smmu_rpm_get(), causing a refcount leak.
Fix this issue by jumping to "out" label when those error scenarios
occur.
arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the
refcount of the "smmu" even though the return value is less than 0.
The reference counting issue happens in some error handling paths of
arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get()
fails, the caller functions forget to decrease the refcount of "smmu"
increased by arm_smmu_rpm_get(), causing a refcount leak.
Fix this issue by calling pm_runtime_resume_and_get() instead of
pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount
balanced in case of failure.
Commit f959dcd6ddfd29235030e8026471ac1b022ad2b0 (dma-direct: Fix
potential NULL pointer dereference) added a null check on the
dma_mask pointer of the kernel's device structure.
Add a dma_mask variable to the ps3_dma_region structure and set
the device structure's dma_mask pointer to point to this new variable.
Fixes runtime errors like these:
# WARNING: Fixes tag on line 10 doesn't match correct format
# WARNING: Fixes tag on line 10 doesn't match correct format
ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0
ps3flash sb_01: ps3stor_setup:193: map DMA region failed
snd_sb_qsound_destroy() contains the calls of removing the previously
created mixer controls, but it doesn't clear the pointers. As
snd_sb_qsound_destroy() itself may be repeatedly called via ioctl,
this could lead to double-free potentially.
Fix it by clearing the struct fields properly afterwards.
This test will require /dev/rtc0, the default RTC device, or one
specified by user to run. Since this default RTC is not guaranteed to
exist on all of the devices, so check its existence first, otherwise
skip this test with the kselftest skip code 4.
Without this patch this test will fail like this on a s390x zVM:
$ selftests: timers: rtcpie
$ /dev/rtc0: No such file or directory
not ok 1 selftests: timers: rtcpie # exit=22
With this patch:
$ selftests: timers: rtcpie
$ Default RTC /dev/rtc0 does not exist. Test Skipped!
not ok 9 selftests: timers: rtcpie # SKIP
Fixed up change log so "With this patch" text doesn't get dropped.
Shuah Khan <skhan@linuxfoundation.org>
Remove the hack to assign the global console_port variable at probe time.
This assumption that cons->index is -1 is wrong for systems that specify
'console=' in the cmdline (or 'stdout-path' in dts). Hence, on such system
the actual console assignment is ignored, and the first UART that happens
to be probed is used as console instead.
Move the logic to console_setup() and map the console to the correct port
through the array of available ports instead.
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
We have started to get a bunch of pointless dmamask not set warnings
that makes the output of dmesg -l err,warn hard to read with many
extra warnings:
cpcap-regulator cpcap-regulator.0: DMA mask not set
cpcap_adc cpcap_adc.0: DMA mask not set
cpcap_battery cpcap_battery.0: DMA mask not set
cpcap-charger cpcap-charger.0: DMA mask not set
cpcap-pwrbutton cpcap-pwrbutton.0: DMA mask not set
cpcap-led cpcap-led.0: DMA mask not set
cpcap-led cpcap-led.1: DMA mask not set
cpcap-led cpcap-led.2: DMA mask not set
cpcap-led cpcap-led.3: DMA mask not set
cpcap-led cpcap-led.4: DMA mask not set
cpcap-rtc cpcap-rtc.0: DMA mask not set
cpcap-usb-phy cpcap-usb-phy.0: DMA mask not set
This seems to have started with commit 4d8bde883bfb ("OF: Don't set
default coherent DMA mask"). We have the parent SPI controller use
DMA, while CPCAP driver and it's children do not. For audio, the
DMA is handled over I2S bus with the McBSP driver.
Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Ivan Jelincic <parazyd@dyne.org> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch adds/modifies MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If qedi_process_cmd_cleanup_resp finds the cmd it frees the work and sets
list_tmf_work to NULL, so qedi_tmf_work should check if list_tmf_work is
non-NULL when it wants to force cleanup.
Link: https://lore.kernel.org/r/20210525181821.7617-20-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The iscsi offload drivers are setting the shost->max_id to the max number
of sessions they support. The problem is that max_id is not the max number
of targets but the highest identifier the targets can have. To use it to
limit the number of targets we need to set it to max sessions - 1, or we
can end up with a session we might not have preallocated resources for.
If we haven't done a unbind target call we can race where
iscsi_conn_teardown wakes up the EH thread and then frees the conn while
those threads are still accessing the conn ehwait.
We can only do one TMF per session so this just moves the TMF fields from
the conn to the session. We can then rely on the
iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call
to remove the target and it's devices, and know after that point there is
no device or scsi-ml callout trying to access the session.
There are a couple places where we could free the iscsi_cls_conn while it's
still in use. This adds some helpers to get/put a refcount on the struct
and converts an exiting user. Subsequent commits will then use the helpers
to fix 2 bugs in the eh code.
While reenabling the IRQ after IRQ poll there may be a small window for the
firmware to post the replies with interrupts raised. In that case the
driver will not see the interrupts which leads to I/O timeout.
This issue only happens when there are many I/O completions on a single
reply queue. This forces the driver to switch between the interrupt and IRQ
context.
Make the driver process the reply queue one more time after enabling the
IRQ.
Consider the case where a VD is deleted and the targetID of that VD is
assigned to a newly created VD. If the sequence of deletion/addition of VD
happens very quickly there is a possibility that second event (VD add)
occurs even before the driver processes the first event (VD delete). As
event processing is done in deferred context the device list remains the
same (but targetID is re-used) so driver will not learn the VD
deletion/additon. I/Os meant for the older VD will be directed to new VD
which may lead to data corruption.
Make driver detect the deleted VD as soon as possible based on the RaidMap
update and block further I/O to that device.
Link: https://lore.kernel.org/r/20210528131307.25683-4-chandrakanth.patil@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
The sysfs handling function sdev_store_queue_depth() enforces that the sdev
queue depth cannot exceed shost can_queue. The initial sdev queue depth
comes from shost cmd_per_lun. However, the LLDD may manually set
cmd_per_lun to be larger than can_queue, which leads to an initial sdev
queue depth greater than can_queue.
Such an issue was reported in [0], which caused a hang. That has since been
fixed in commit fc09acb7de31 ("scsi: scsi_debug: Fix cmd_per_lun, set to
max_queue").
Stop this possibly happening for other drivers by capping shost cmd_per_lun
at shost can_queue.
Link: https://lore.kernel.org/r/1621434662-173079-1-git-send-email-john.garry@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver is encountering a crash in lpfc_free_iocb_list() while
performing initial attachment.
Code review found this to be an errant failure path that was taken, jumping
to a tag that then referenced structures that were uninitialized.
Fix the failure path.
Link: https://lore.kernel.org/r/20210514195559.119853-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
An 'unexpected timeout' message may be seen in a point-2-point topology.
The message occurs when a PLOGI is received before the driver is notified
of FLOGI completion. The FLOGI completion failure causes discovery to be
triggered for a second time. The discovery timer is restarted but no new
discovery activity is initiated, thus the timeout message eventually
appears.
In point-2-point, when discovery has progressed before the FLOGI completion
is processed, it is not a failure. Add code to FLOGI completion to detect
that discovery has progressed and exit the FLOGI handling (noop'ing it).
Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After commit 6c11dc060427 ("scsi: hisi_sas: Fix IRQ checks") we have the
error codes returned by platform_get_irq() ready for the propagation
upsream in interrupt_init_v1_hw() -- that will fix still broken deferred
probing. Let's propagate the error codes from devm_request_irq() as well
since I don't see the reason to override them with -ENOENT...
Link: https://lore.kernel.org/r/49ba93a3-d427-7542-d85a-b74fe1a33a73@omp.ru Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The purpose of the w1_ds2438_get_page function is to get the register
values at the page passed as the pageno parameter. However, the page0 was
hardcoded, such that the function always returned the page0 contents. Fixed
so that the function can retrieve any page.
I've explained that optional FireWire card for d.2 is also built-in to
d.2 Pro, however it's wrong. The optional card uses DM1000 ASIC and has
'Mackie DJ Mixer' in its model name of configuration ROM. On the other
hand, built-in FireWire card for d.2 Pro and d.4 Pro uses OXFW971 ASIC
and has 'd.Pro' in its model name according to manuals and user
experiences. The former card is not the card for d.2 Pro. They are similar
in appearance but different internally.
probe() error paths after runtime pm is enabled, should disable it.
remove() should not call pm_runtime_put_noidle() as there is no
matching get() to have raised the reference count. This case
has no affect a the runtime pm core protects against going negative.
Whilst here use pm_runtime_resume_and_get() to tidy things up a little.
coccicheck script didn't get this one due to complex code structure so
found by inspection.
In both the probe() error path and remove() pm_runtime_put_noidle()
is called which will decrement the runtime pm reference count.
However, there is no matching function to have raised the reference count.
Not this isn't a fix as the runtime pm core will stop the reference count
going negative anyway.
An alternative would have been to raise the count in these paths, but
it is not clear why that would be necessary.
Whilst we are here replace some boilerplate with pm_runtime_resume_and_get()
Found using coccicheck script under review at:
https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20210509113354.660190-2-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
There is an issue with the ASPM(optional) capability checking function.
A device might be attached to root complex directly, in this case,
bus->self(bridge) will be NULL, thus priv->parent_pdev is NULL.
Since alcor_pci_init_check_aspm(priv->parent_pdev) checks the PCI link's
ASPM capability and populate parent_cap_off, which will be used later by
alcor_pci_aspm_ctrl() to dynamically turn on/off device, what we can do
here is to avoid checking the capability if we are on the root complex.
This will make pdev_cap_off 0 and alcor_pci_aspm_ctrl() will simply
return when bring called, effectively disable ASPM for the device.
In ibmasm_init_one, it calls ibmasm_init_remote_input_dev().
Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are
allocated by input_allocate_device(), and assigned to
sp->remote.mouse_dev and sp->remote.keybd_dev respectively.
In the err_free_devices error branch of ibmasm_init_one,
mouse_dev and keybd_dev are freed by input_free_device(), and return
error. Then the execution runs into error_send_message error branch
of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called
to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev.
My patch add a "error_init_remote" label to handle the error of
ibmasm_init_remote_input_dev(), to avoid the uaf bugs.
We should be very careful about the register values that will be used
for division or modulo operations, althrough the possibility that the
UARTBAUD register value is zero is very low, but we had better to deal
with the "bad data" of hardware in advance to avoid division or modulo
by zero leading to undefined kernel behavior.
An srcu_struct structure that is initialized before rcu_init_geometry()
will have its srcu_node hierarchy based on CONFIG_NR_CPUS. Once
rcu_init_geometry() is called, this hierarchy is compressed as needed
for the actual maximum number of CPUs for this system.
Later on, that srcu_struct structure is confused, sometimes referring
to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead
to the new num_possible_cpus() hierarchy. For example, each of its
->mynode fields continues to reference the original leaf rcu_node
structures, some of which might no longer exist. On the other hand,
srcu_for_each_node_breadth_first() traverses to the new node hierarchy.
There are at least two bad possible outcomes to this:
1) a) A callback enqueued early on an srcu_data structure (call it
*sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in
srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf
(say 3 levels).
b) The grace period ends after rcu_init_geometry() shrinks the
nodes level to a single one. srcu_gp_end() walks through the new
srcu_node hierarchy without ever reaching the old leaves so the
callback is never executed.
This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32
and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests
verification never completes and the boot hangs:
2) An srcu_struct structure that is initialized before rcu_init_geometry()
and used afterward will always have stale rdp->mynode references,
resulting in callbacks to be missed in srcu_gp_end(), just like in
the previous scenario.
This commit therefore causes init_srcu_struct_nodes to initialize the
geometry, if needed. This ensures that the srcu_node hierarchy is
properly built and distributed from the get-go.
Suggested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Uladzislau Rezki <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use devm_platform_get_and_ioremap_resource() to simplify
code and avoid a null-ptr-deref by checking 'res' in it.
[yyl: since devm_platform_get_and_ioremap_resource() is introduced
in linux-5.7, so just check the return value after calling
platform_get_resource()]
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The execution of fb_delete_videomode() is not based on the result of the
previous fbcon_mode_deleted(). As a result, the mode is directly deleted,
regardless of whether it is still in use, which may cause UAF.
==================================================================
BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \
drivers/video/fbdev/core/modedb.c:924
Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962
The following sequence can be used to trigger a UAF:
int fscontext_fd = fsopen("cgroup");
int fd_null = open("/dev/null, O_RDONLY);
int fsconfig(fscontext_fd, FSCONFIG_SET_FD, "source", fd_null);
close_range(3, ~0U, 0);
The cgroup v1 specific fs parser expects a string for the "source"
parameter. However, it is perfectly legitimate to e.g. specify a file
descriptor for the "source" parameter. The fs parser doesn't know what
a filesystem allows there. So it's a bug to assume that "source" is
always of type fs_value_is_string when it can reasonably also be
fs_value_is_file.
This assumption in the cgroup code causes a UAF because struct
fs_parameter uses a union for the actual value. Access to that union is
guarded by the param->type member. Since the cgroup paramter parser
didn't check param->type but unconditionally moved param->string into
fc->source a close on the fscontext_fd would trigger a UAF during
put_fs_context() which frees fc->source thereby freeing the file stashed
in param->file causing a UAF during a close of the fd_null.
Fix this by verifying that param->type is actually a string and report
an error if not.
In follow up patches I'll add a new generic helper that can be used here
and by other filesystems instead of this error-prone copy-pasta fix.
But fixing it in here first makes backporting a it to stable a lot
easier.
Fixes: 8d2451f4994f ("cgroup1: switch to option-by-option parsing") Reported-by: syzbot+283ce5a46486d6acdbaf@syzkaller.appspotmail.com Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@kernel.org> Cc: syzkaller-bugs <syzkaller-bugs@googlegroups.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()")
changed the allocation logic to call put_device() to perform host cleanup
with the assumption that IDA removal and stopping the kthread would
properly be performed in scsi_host_dev_release(). However, in the unlikely
case that the error handler thread fails to spawn, shost->ehandler is set
to ERR_PTR(-ENOMEM).
The error handler cleanup code in scsi_host_dev_release() will call
kthread_stop() if shost->ehandler != NULL which will always be the case
whether the kthread was successfully spawned or not. In the case that it
failed to spawn this has the nasty side effect of trying to dereference an
invalid pointer when kthread_stop() is called. The following splat provides
an example of this behavior in the wild:
When the host is using debug registers but the guest is not using them
nor is the guest in guest-debug state, the kvm code does not reset
the host debug registers before kvm_x86->run(). Rather, it relies on
the hardware vmentry instruction to automatically reset the dr7 registers
which ensures that the host breakpoints do not affect the guest.
This however violates the non-instrumentable nature around VM entry
and exit; for example, when a host breakpoint is set on vcpu->arch.cr2,
Another issue is consistency. When the guest debug registers are active,
the host breakpoints are reset before kvm_x86->run(). But when the
guest debug registers are inactive, the host breakpoints are delayed to
be disabled. The host tracing tools may see different results depending
on what the guest is doing.
To fix the problems, we clear %db7 unconditionally before kvm_x86->run()
if the host has set any breakpoints, no matter if the guest is using
them or not.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20210628172632.81029-1-jiangshanlai@gmail.com> Cc: stable@vger.kernel.org
[Only clear %db7 instead of reloading all debug registers. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ignore the guest MAXPHYADDR reported by CPUID.0x8000_0008 if TDP, i.e.
NPT, is disabled, and instead use the host's MAXPHYADDR. Per AMD'S APM:
Maximum guest physical address size in bits. This number applies only
to guests using nested paging. When this field is zero, refer to the
PhysAddrSize field for the maximum guest physical address size.
BUG: KASAN: use-after-free in kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183
Read of size 8 at addr ffff0000c03a2500 by task syz-executor083/4269
If kvm_io_bus_unregister_dev() return -ENOMEM, we already call kvm_iodevice_destructor()
inside this function to delete 'struct kvm_coalesced_mmio_dev *dev' from list
and free the dev, but kvm_iodevice_destructor() is called again, it will lead
the above issue.
Let's check the the return value of kvm_io_bus_unregister_dev(), only call
kvm_iodevice_destructor() if the return value is 0.
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Message-Id: <20210626070304.143456-1-wangkefeng.wang@huawei.com> Cc: stable@vger.kernel.org Fixes: 5d3c4c79384a ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed", 2021-04-20) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7ef4c19d245f3dc2 ("smackfs: restrict bytes count in smackfs write
functions") missed that count > SMK_CIPSOMAX check applies to only
format == SMK_FIXED24_FMT case.
The Elgato Cam Link 4K HDMI video capture card reports to support three
different pixel formats, where the first format depends on the connected
HDMI device.
Changing the pixel format to anything besides the first pixel format
does not work:
```
$ v4l2-ctl -d /dev/video0 --try-fmt-video pixelformat=YU12
Format Video Capture:
Width/Height : 3840/2160
Pixel Format : 'NV12' (Y/CbCr 4:2:0)
Field : None
Bytes per Line : 3840
Size Image : 12441600
Colorspace : sRGB
Transfer Function : Rec. 709
YCbCr/HSV Encoding: Rec. 709
Quantization : Default (maps to Limited Range)
Flags :
```
User space applications like VLC might show an error message on the
terminal in that case:
```
libv4l2: error set_fmt gave us a different result than try_fmt!
```
Depending on the error handling of the user space applications, they
might display a distorted video, because they use the wrong pixel format
for decoding the stream.
The Elgato Cam Link 4K responds to the USB video probe
VS_PROBE_CONTROL/VS_COMMIT_CONTROL with a malformed data structure: The
second byte contains bFormatIndex (instead of being the second byte of
bmHint). The first byte is always zero. The third byte is always 1.
The firmware bug was reported to Elgato on 2020-12-01 and it was
forwarded by the support team to the developers as feature request.
There is no firmware update available since then. The latest firmware
for Elgato Cam Link 4K as of 2021-03-23 has MCU 20.02.19 and FPGA 67.
Therefore correct the malformed data structure for this device. The
change was successfully tested with VLC, OBS, and Chromium using
different pixel formats (YUYV, NV12, YU12), resolutions (3840x2160,
1920x1080), and frame rates (29.970 and 59.940 fps).
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
Fix the single zero-length control request which was using the
read-register helper, and update the helper so that zero-length reads
fail with an error message instead.
Fixes: 6a7eba24e4f0 ("V4L/DVB (8157): gspca: all subdrivers") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the USB_REQ_SYNCH_FRAME request which erroneously used
usb_sndctrlpipe().
Fixes: 27d35fc3fb06 ("V4L/DVB (10639): gspca - sq905: New subdriver.") Cc: stable@vger.kernel.org # 2.6.30 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the control requests which erroneously used usb_rcvctrlpipe().
Fixes: 8466028be792 ("V4L/DVB (8734): Initial support for AME DTV-5100 USB2.0 DVB-T") Cc: stable@vger.kernel.org # 2.6.28 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The saa6588_ioctl() function expects to get called from other kernel
functions with a 'saa6588_command' pointer, but I found nothing stops it
from getting called from user space instead, which seems rather dangerous.
The same thing happens in the davinci vpbe driver with its VENC_GET_FLD
command.
As a quick fix, add a separate .command() callback pointer for this
driver and change the two callers over to that. This change can easily
get backported to stable kernels if necessary, but since there are only
two drivers, we may want to eventually replace this with a set of more
specialized callbacks in the long run.
On Macbook 2013, resuming from suspend-to-idle or standby resulted in the
external monitor no longer being detected, a stacktrace, and errors like
this in dmesg:
pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible)
The reason is that we know how to turn power to the Thunderbolt controller
*off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power
back on. We have to rely on firmware to turn the power back on.
When going to the "suspend-to-idle" or "standby" system sleep states,
firmware is not involved either on the suspend side or the resume side, so
we can't use SXIO/SXFP/SXLF to turn the power off.
Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when
we're going to the "suspend-to-idle" or "standby" system sleep states.
Fixes: 1df5172c5c25 ("PCI: Suspend/resume quirks for Apple thunderbolt")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767 Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove_raw() in dm_btree_remove() may fail due to IO read error
(e.g. read the content of origin block fails during shadowing),
and the value of shadow_spine::root is uninitialized, but
the uninitialized value is still assign to new_root in the
end of dm_btree_remove().
For dm-thin, the value of pmd->details_root or pmd->root will become
an uninitialized value, so if trying to read details_info tree again
out-of-bound memory may occur as showed below:
general protection fault, probably for non-canonical address 0x3fdcb14c8d7520
CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6
Hardware name: QEMU Standard PC
RIP: 0010:metadata_ll_load_ie+0x14/0x30
Call Trace:
sm_metadata_count_is_more_than_one+0xb9/0xe0
dm_tm_shadow_block+0x52/0x1c0
shadow_step+0x59/0xf0
remove_raw+0xb2/0x170
dm_btree_remove+0xf4/0x1c0
dm_pool_delete_thin_device+0xc3/0x140
pool_message+0x218/0x2b0
target_message+0x251/0x290
ctl_ioctl+0x1c4/0x4d0
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0x7b/0xb0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixing it by only assign new_root when removal succeeds
Signed-off-by: Hou Tao <houtao1@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f755e85c332 ("coresight: Add helper for inserting synchronization
packets") removed trailing '\0' from barrier_pkt array and updated the
call sites like etb_update_buffer() to have proper checks for barrier_pkt
size before read but missed updating tmc_update_etf_buffer() which still
reads barrier_pkt past the array size resulting in KASAN out-of-bounds
bug. Fix this by adding a check for barrier_pkt size before accessing
like it is done in etb_update_buffer().
BUG: KASAN: global-out-of-bounds in tmc_update_etf_buffer+0x4b8/0x698
Read of size 4 at addr ffffffd05b7d1030 by task perf/2629
The buggy address belongs to the variable:
barrier_pkt+0x10/0x40
Memory state around the buggy address: ffffffd05b7d0f00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 ffffffd05b7d0f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffd05b7d1000: 00 00 00 00 00 00 fa fa fa fa fa fa 00 00 00 03
^ ffffffd05b7d1080: fa fa fa fa 00 02 fa fa fa fa fa fa 03 fa fa fa ffffffd05b7d1100: fa fa fa fa 00 00 00 00 05 fa fa fa fa fa fa fa
==================================================================
In the out_err_bus_register error branch of tpci200_pci_probe,
tpci200->info->cfg_regs is freed by tpci200_uninstall()->
tpci200_unregister()->pci_iounmap(..,tpci200->info->cfg_regs)
in the first time.
But later, iounmap() is called to free tpci200->info->cfg_regs
again.
My patch sets tpci200->info->cfg_regs to NULL after tpci200_uninstall()
to avoid the double free.
Fixes: cea2f7cdff2af ("Staging: ipack/bridges/tpci200: Use the TPCI200 in big endian mode") Cc: stable <stable@vger.kernel.org> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Link: https://lore.kernel.org/r/20210524093205.8333-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that
on systems where pid_max is configured higher than PID_MAX_DEFAULT the
ftrace record-tgid option doesn't work so well. Any tasks with PIDs
higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and
don't show up in the saved_tgids file.
In particular since systemd v243 & above configure pid_max to its
highest possible 1<<22 value by default on 64 bit systems this renders
the record-tgids option of little use.
Increase the size of tgid_map to the configured pid_max instead,
allowing it to cover the full range of PIDs up to the maximum value of
PID_MAX_LIMIT if the system is configured that way.
On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the
size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in
memory overhead sounds significant 64 bit systems are presumably best
placed to accommodate it, and since tgid_map is only allocated when the
record-tgid option is actually used presumably the user would rather it
spends sufficient memory to actually record the tgids they expect.
The size of tgid_map could also increase for CONFIG_BASE_SMALL=y
configurations, but these seem unlikely to be systems upon which people
are both configuring a large pid_max and running ftrace with record-tgid
anyway.
Of note is that we only allocate tgid_map once, the first time that the
record-tgid option is enabled. Therefore its size is only set once, to
the value of pid_max at the time the record-tgid option is first
enabled. If a user increases pid_max after that point, the saved_tgids
file will not contain entries for any tasks with pids beyond the earlier
value of pid_max.
Link: https://lkml.kernel.org/r/20210701172407.889626-2-paulburton@google.com Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks") Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Fernandes <joelaf@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Paul Burton <paulburton@google.com>
[ Fixed comment coding style ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tgid_map array records a mapping from pid to tgid, where the index
of an entry within the array is the pid & the value stored at that index
is the tgid.
The saved_tgids_next() function iterates over pointers into the tgid_map
array & dereferences the pointers which results in the tgid, but then it
passes that dereferenced value to trace_find_tgid() which treats it as a
pid & does a further lookup within the tgid_map array. It seems likely
that the intent here was to skip over entries in tgid_map for which the
recorded tgid is zero, but instead we end up skipping over entries for
which the thread group leader hasn't yet had its own tgid recorded in
tgid_map.
A minimal fix would be to remove the call to trace_find_tgid, turning:
if (trace_find_tgid(*ptr))
into:
if (*ptr)
..but it seems like this logic can be much simpler if we simply let
seq_read() iterate over the whole tgid_map array & filter out empty
entries by returning SEQ_SKIP from saved_tgids_show(). Here we take that
approach, removing the incorrect logic here entirely.
Link: https://lkml.kernel.org/r/20210630003406.4013668-1-paulburton@google.com Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks") Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Fernandes <joelaf@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Paul Burton <paulburton@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 545fbd0775ba ("rq-qos: fix missed wake-ups in rq_qos_throttle")
tried to fix a problem that a process could be sleeping in rq_qos_wait()
without anyone to wake it up. However the fix is not complete and the
following can still happen:
completes IOs, inflight
decreased
prepare_to_wait_exclusive()
prepare_to_wait_exclusive()
has_sleeper = !wq_has_single_sleeper() -> true as there are two sleepers
has_sleeper = !wq_has_single_sleeper() -> true
io_schedule() io_schedule()
Deadlock as now there's nobody to wakeup the two waiters. The logic
automatically blocking when there are already sleepers is really subtle
and the only way to make it work reliably is that we check whether there
are some waiters in the queue when adding ourselves there. That way, we
are guaranteed that at least the first process to enter the wait queue
will recheck the waiting condition before going to sleep and thus
guarantee forward progress.
Fixes: 545fbd0775ba ("rq-qos: fix missed wake-ups in rq_qos_throttle") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210607112613.25344-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's two variables being increased in that loop (i and j), and i
follows the raw data, and j follows what is being written into the buffer.
We should compare 'i' to MAX_MEMHEX_BYTES or compare 'j' to HEX_CHARS.
Otherwise, if 'j' goes bigger than HEX_CHARS, it will overflow the
destination buffer.
extcon driver for Basin Cove PMIC shadows the switch status used for dwc3
DRD to detect a change in the switch position. This change initializes the
status at probe time.
Trying to get the AB8500 charging driver working I ran into a bit
of bitrot: we haven't used the driver for a while so errors in
refactorings won't be noticed.
This one is pretty self evident: use argument to the macro or we
end up with a random pointer to something else.
Cc: stable@vger.kernel.org Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Marcus Cooper <codekipper@gmail.com> Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UBIFS may occur some problems with concurrent xattr_{set|get} and
listxattr operations, such as assertion failure, memory corruption,
stale xattr value[1].
Fix it by importing a new rw-lock in @ubifs_inode to serilize write
operations on xattr, concurrent read operations are still effective,
just like ext4.
The following fixes are done for tcc sysfs interface:
- TCC is 6 bits only from bit 29-24
- TCC of 0 is valid
- When BIT(31) is set, this register is read only
- Check for invalid tcc value
- Error for negative values
When an IPMI watchdog timer is being stopped in ipmi_close() or
ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to
WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called
to install this action. The latter function ends up invoking
__ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI
request.
For IPMI 1.0, this operation results in fully stopping the watchdog timer.
For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't
stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes
that the watchdog timer has its action correctly updated to 'none' but the
timer continues to run. A problem is that IPMI firmware can then still log
an expiration event when the configured timeout is reached, which is
unexpected because the watchdog timer was requested to be stopped.
The patch fixes this problem by not setting the "don't stop" flag in
__ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which
results in stopping the watchdog timer. This makes the behaviour for
IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in
__ipmi_heartbeat() which does not allow to reset the watchdog if the
current action is WDOG_TIMEOUT_NONE as that would start the timer.
fw_cfg_showrev() is called by an indirect call in kobj_attr_show(),
which violates clang's CFI checking because fw_cfg_showrev()'s second
parameter is 'struct attribute', whereas the ->show() member of 'struct
kobj_structure' expects the second parameter to be of type 'struct
kobj_attribute'.
Fix this by converting fw_cfg_rev_attr to 'struct kobj_attribute' where
this would have been caught automatically by the incompatible pointer
types compiler warning. Update fw_cfg_showrev() accordingly.
The driver_name="tegra" is now required by the newer ALSA UCMs, otherwise
Tegra UCMs don't match by the path/name.
All Tegra machine drivers are specifying the card's name, but it has no
effect if model name is specified in the device-tree since it overrides
the card's name. We need to set the driver_name to "tegra" in order to
get a usable lookup path for the updated ALSA UCMs. The new UCM lookup
path has a form of driver_name/card_name.
The old lookup paths that are based on driver module name continue to
work as before. Note that UCM matching never worked for Tegra ASoC drivers
if they were compiled as built-in, this is fixed by supporting the new
naming scheme.
MIPS: fix "mipsel-linux-ld: decompress.c:undefined reference to `memmove'"
This is _not_ an upstream commit and just for 5.4.y only.
kernel test robot reported a 5.4.y build issue found by randconfig [1]
after backporting commit 89b158635ad7 ("lib/lz4: explicitly support
in-place decompression"") due to "undefined reference to `memmove'".
However, upstream and 5.10 LTS seem fine. After digging further,
I found commit a510b616131f ("MIPS: Add support for ZSTD-compressed
kernels") introduced memmove() occasionally and it has been included
since v5.10.
This partially cherry-picks the memmove() part of commit a510b616131f
to fix the reported build regression since we don't need the whole
patch for 5.4 LTS at all.
The stratix10-soc driver uses fpga_mgr_create() function and is therefore
responsible to call fpga_mgr_free() to release the class driver resources.
Add a missing call to fpga_mgr_free in the s10_remove() function.
Bad counter reads are experienced sometimes when bit 10 or greater rolls
over. Originally, testing showed that at least 10 lower bits would be
set to the same value during these bad reads. However, some users still
reported time skips.
Wider testing revealed that on some chips, occasionally only the lowest
9 bits would read as the anomalous value. During these reads (which
still happen only when bit 10), bit 9 would read as the correct value.
Reduce the mask by one bit to cover these cases as well.
Cc: stable@vger.kernel.org Fixes: c950ca8c35ee ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability") Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210515021439.55316-1-samuel@sholland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey and Joshua tried to solve a cpusets related hotplug problem which is
user space visible and results in unexpected behaviour for some time after
a CPU has been plugged in and the corresponding uevent was delivered.
cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a
workqueue. This is done because the cpusets code has already a lock
nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or
waiting for the work to finish with cpu_hotplug_lock held can and will
deadlock because that results in the reverse lock order.
As a consequence the uevent can be delivered before cpusets have consistent
state which means that a user space invocation of sched_setaffinity() to
move a task to the plugged CPU fails up to the point where the scheduled
work has been processed.
The same is true for CPU unplug, but that does not create user observable
failure (yet).
It's still inconsistent to claim that an operation is finished before it
actually is and that's the real issue at hand. uevents just make it
reliably observable.
Obviously the problem should be fixed in cpusets/cgroups, but untangling
that is pretty much impossible because according to the changelog of the
commit which introduced this 8 years ago:
the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and
the whole code is built around that.
So bite the bullet and invoke the relevant cpuset function, which waits for
the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and
only when tasks are not frozen by suspend/hibernate because that would
obviously wait forever.
Waiting there with cpu_add_remove_lock, which is protecting the present
and possible CPU maps, held is not a problem at all because neither work
queues nor cpusets/cgroups have any lockchains related to that lock.
Waiting in the hotplug machinery is not problematic either because there
are already state callbacks which wait for hardware queues to drain. It
makes the operations slightly slower, but hotplug is slow anyway.
This ensures that state is consistent before returning from a hotplug
up/down operation. It's still inconsistent during the operation, but that's
a different story.
Add a large comment which explains why this is done and why this is not a
dump ground for the hack of the day to work around half thought out locking
schemes. Document also the implications vs. hotplug operations and
serialization or the lack of it.
Thanks to Alexy and Joshua for analyzing why this temporary
sched_setaffinity() failure happened.
DIPM is unsupported or broken on sunxi. Trying to enable the power
management policy med_power_with_dipm on an Allwinner A20 SoC based board
leads to immediate I/O errors and the attached SATA disk disappears from
the /dev filesystem. A reset (power cycle) is required to make the SATA
controller or disk work again. The A10 and A20 SoC data sheets and manuals
don't mention DIPM at all [1], so it's fair to assume that it's simply not
supported. But even if it was, it should be considered broken and best be
disabled in the ahci_sunxi driver.
While initializing an UHS-I SD card, the mmc core first tries to switch to
1.8V I/O voltage, before it continues to change the settings for the bus
speed mode.
However, the current behaviour in the mmc core is inconsistent and doesn't
conform to the SD spec. More precisely, an SD card that supports UHS-I must
set both the SD_OCR_CCS bit and the SD_OCR_S18R bit in the OCR register
response. When switching to 1.8V I/O the mmc core correctly checks both of
the bits, but only the SD_OCR_S18R bit when changing the settings for bus
speed mode.
Rather than actually fixing the code to confirm to the SD spec, let's
deliberately deviate from it by requiring only the SD_OCR_S18R bit for both
parts. This enables us to support UHS-I for SDSC cards (outside spec),
which is actually being supported by some existing SDSC cards. Moreover,
this fixes the inconsistent behaviour.
It might be that something goes wrong during tuning so the MMC core will
immediately trigger a retune. In our case it was:
- we sent a tuning block
- there was an error so we need to send an abort cmd to the eMMC
- the abort cmd had a CRC error
- retune was set by the MMC core
This lead to a vicious circle causing a performance regression of 75%.
So, clear retuning flags before we enable retuning to start with a known
cleared state.
Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624151616.38770-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an eMMC device is being run in HS400 mode, any access to the
RPMB device will cause the error message "mmc1: Invalid UHS-I mode
selected". This happens as a result of tuning being disabled before
RPMB access and then re-enabled after the RPMB access is complete.
When tuning is re-enabled, the system has to switch from HS400
to HS200 to do the tuning and then back to HS400. As part of
sequence to switch from HS400 to HS200 the system is temporarily
put into HS mode. When switching to HS mode, sdhci_get_preset_value()
is called and does not have support for HS mode and prints the warning
message and returns the preset for SDR12. The fix is to add support
for MMC and SD HS modes to sdhci_get_preset_value().
This can be reproduced on any system running eMMC in HS400 mode
(not HS400ES) by using the "mmc" utility to run the following
command: "mmc rpmb read-counter /dev/mmcblk0rpmb".
Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 52983382c74f ("mmc: sdhci: enhance preset value function") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624163045.33651-1-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting the cap without the modifier list is very confusing to
userspace. Fix that by listing the ones we support explicitly.
Stable backport so that userspace can rely on this working in a
reasonable way, i.e. that the cap set implies IN_FORMATS is available.
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-5-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
It was slightly inconsistently though, since planes with only linear
modifier support haven't listed that explicitly. Fix that, and cc:
stable to allow userspace to rely on this. Again don't backport
further than where Paul's patch got added.
[Why]
This hasn't been well tested and leads to complete system hangs on DCN1
based systems, possibly others.
The system hang can be reproduced by gesturing the video on the YouTube
Android app on ChromeOS into full screen.
[How]
Reject atomic commits with non-zero drm_plane_state.src_x or src_y values.
v2:
- Add code comment describing the reason we're rejecting non-zero
src_x and src_y
- Drop gerrit Change-Id
- Add stable CC
- Based on amd-staging-drm-next
v3: removed trailing whitespace
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Cc: nicholas.kazlauskas@amd.com Cc: amd-gfx@lists.freedesktop.org Cc: alexander.deucher@amd.com Cc: Roman.Li@amd.com Cc: hersenxs.wu@amd.com Cc: danny.wang@amd.com Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add device HID AMDI0031 to the AMD GPIO controller driver match table.
This controller can be found on Microsoft Surface Laptop 4 devices and
seems similar enough that we can just copy the existing AMDI0030 entry.
commit cf6d100dd238 ("drm/rockchip: dsi: add dual mipi support") added
this devcnt field and call to component_del(). However, these both
appear to be erroneous changes left over from an earlier version of the
patch. In the version merged, nothing ever modifies devcnt, meaning
component_del() runs unconditionally and in addition to the
component_del() calls in dw_mipi_dsi_rockchip_host_detach(). The second
call fails to delete anything and produces a warning in dmesg.
If we look at the previous version of the patch[1], however, we see that
it had logic to calculate devcnt and call component_add() in certain
situations. This was removed in v6, and the fact that the deletion code
was not appears to have been an oversight.
Navi series GPUs have 2 SIMDs per CU (and then 2 CUs per WGP).
The NV enum headers incorrectly listed this as 4, which later meant
we were incorrectly reporting the number of SIMDs in the HSA
topology. This could cause problems down the line for user-space
applications that want to launch a fixed amount of work to each
SIMD.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A change in clang 13 results in the __lwsync macro being defined as
__builtin_ppc_lwsync, which emits 'lwsync' or 'msync' depending on what
the target supports. This breaks the build because of -Werror in
arch/powerpc, along with thousands of warnings:
In file included from arch/powerpc/kernel/pmc.c:12:
In file included from include/linux/bug.h:5:
In file included from arch/powerpc/include/asm/bug.h:109:
In file included from include/asm-generic/bug.h:20:
In file included from include/linux/kernel.h:12:
In file included from include/linux/bitops.h:32:
In file included from arch/powerpc/include/asm/bitops.h:62:
arch/powerpc/include/asm/barrier.h:49:9: error: '__lwsync' macro redefined [-Werror,-Wmacro-redefined]
#define __lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
^
<built-in>:308:9: note: previous definition is here
#define __lwsync __builtin_ppc_lwsync
^
1 error generated.
Undefine this macro so that the runtime patching introduced by
commit 2d1b2027626d ("powerpc: Fixup lwsync at runtime") continues to
work properly with clang and the build no longer breaks.
The powerpc kernel is not prepared to handle exec faults from kernel.
Especially, the function is_exec_fault() will return 'false' when an
exec fault is taken by kernel, because the check is based on reading
current->thread.regs->trap which contains the trap from user.
For instance, when provoking a LKDTM EXEC_USERSPACE test,
current->thread.regs->trap is set to SYSCALL trap (0xc00), and
the fault taken by the kernel is not seen as an exec fault by
set_access_flags_filter().
Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix
with autonuma") made it clear and handled it properly. But later on
commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute
faults") removed that handling, introducing test based on error_code.
And here is the problem, because on the 603 all upper bits of SRR1
get cleared when the TLB instruction miss handler bails out to ISI.
Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy
search_exception_tables() verification"), an exec fault from kernel
at a userspace address was indirectly caught by the lack of entry for
that address in the exception tables. But after that commit the
kernel mainly relies on KUAP or on core mm handling to catch wrong
user accesses. Here the access is not wrong, so mm handles it.
It is a minor fault because PAGE_EXEC is not set,
set_access_flags_filter() should set PAGE_EXEC and voila.
But as is_exec_fault() returns false as explained in the beginning,
set_access_flags_filter() bails out without setting PAGE_EXEC flag,
which leads to a forever minor exec fault.
As the kernel is not prepared to handle such exec faults, the thing to
do is to fire in bad_kernel_fault() for any exec fault taken by the
kernel, as it was prior to commit d3ca587404b3.
Memory sanitizer warns if a write is performed where the memory being
read for the write is uninitialized. Avoid this warning by initializing
the memory.
Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200912053725.1405857-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Annotate the firmware files CCP might need using MODULE_FIRMWARE().
This will get them included into an initrd when CCP is also included
there. Otherwise the CCP module will not find its firmware when loaded
before the root-fs is mounted.
This can cause problems when the pre-loaded SEV firmware is too old to
support current SEV and SEV-ES virtualization features.
Fixes: e93720606efd ("crypto: ccp - Allow SEV firmware to be chosen based on Family and Model") Cc: stable@vger.kernel.org # v4.20+ Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When initializing a no-key name, fscrypt_fname_disk_to_usr() sets the
minor_hash to 0 if the (major) hash is 0.
This doesn't make sense because 0 is a valid hash code, so we shouldn't
ignore the filesystem-provided minor_hash in that case. Fix this by
removing the special case for 'hash == 0'.
This is an old bug that appears to have originated when the encryption
code in ext4 and f2fs was moved into fs/crypto/. The original ext4 and
f2fs code passed the hash by pointer instead of by value. So
'if (hash)' actually made sense then, as it was checking whether a
pointer was NULL. But now the hashes are passed by value, and
filesystems just pass 0 for any hashes they don't have. There is no
need to handle this any differently from the hashes actually being 0.
It is difficult to reproduce this bug, as it only made a difference in
the case where a filename's 32-bit major hash happened to be 0.
However, it probably had the largest chance of causing problems on
ubifs, since ubifs uses minor_hash to do lookups of no-key names, in
addition to using it as a readdir cookie. ext4 only uses minor_hash as
a readdir cookie, and f2fs doesn't use minor_hash at all.
Fixes: 0b81d0779072 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto") Cc: <stable@vger.kernel.org> # v4.6+ Link: https://lore.kernel.org/r/20210527235236.2376556-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang's integrated assembler only accepts these instructions when the
cpu is set to mips32r5. With this change, we can assemble
malta_defconfig with Clang via `make LLVM_IAS=1`.
Link: https://github.com/ClangBuiltLinux/linux/issues/763 Reported-by: Dmitry Golovin <dima@golovin.in> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cause of the problem is as follows:
1. when cat /sys/devices/system/memory/memory0/valid_zones,
test_pages_in_a_zone() will be called.
2. test_pages_in_a_zone() finds the zone according to stat_pfn = 0.
The smallest pfn of the numa node in the mips architecture is 128,
and the page corresponding to the previous 0~127 pfn is not
initialized (page->flags is 0xFFFFFFFF)
3. The nid and zonenum obtained using page_zone(pfn_to_page(0)) are out
of bounds in the corresponding array,
&NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)],
access to the out-of-bounds zone member variables appear abnormal,
resulting in Oops.
Therefore, it is necessary to keep the page between 0 and the minimum
pfn to prevent Oops from appearing.
The first chunk in a packet is ensured to be present at the beginning of
sctp_rcv(), as a packet needs to have at least 1 chunk. But the second
one, may not be completely available and ch->length can be over
uninitialized memory.
Fix here is by only trying to walk on the next chunk if there is enough to
hold at least the header, and then proceed with the ch->length validation
that is already there.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
