Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Wed, 22 Jun 2016 11:52:20 +0000 (14:52 +0300)]
gtk+3: Upgrade 3.18.8 -> 3.20.6
* Remove a patch that's no longer needed (as we don't
have a problem with client side decorations anymore)
* Wayland build now depends on wayland-protocols:
Use same WAYLAND_PROTOCOLS_SYSROOT_DIR trick as weston so
protocols are found and multilib build does not break
* Add new binary gtk-query-settings to -dev package
* Rebase patches
* Modify 0003-Add-disable-opengl-configure-option.patch so
that gdkx.h really is generated whenever it changes
* Depend on wayland-protocols in gtk+3-dev if Wayland is enabled as otherwise
the pkg-config files can't be used - RB
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
gtk+3: depend on wayland-protocols if wayland enabled Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock [Wed, 22 Jun 2016 10:22:25 +0000 (11:22 +0100)]
openssl: prevent warnings from openssl-c_rehash.sh
The openssl-c_rehash.sh script reports duplicate files and files which
don't contain a certificate or CRL by echoing a WARNING to stdout.
This warning gets picked up by the log checker during rootfs and results
in several warnings getting reported to the console during an image build.
To prevent the log from being overrun by warnings related to certificates
change these messages in openssl-c_rehash.sh to be prefixed with NOTE not
WARNING.
Richard Purdie [Wed, 22 Jun 2016 06:24:16 +0000 (07:24 +0100)]
bitbake.conf: Drop BUILDSDK_LDFLAGS rpath, rpath-link
The SDK used to work differently and didn't include its own libc/loader.
In that case, these options were needed to correctly handle the different
library locations. With the modern relocatable SDK, we don't need these
options any more as the default paths in the dynamic loader are good enough.
They just given potential for errors so drop them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ting Liu [Wed, 15 Jun 2016 15:01:10 +0000 (23:01 +0800)]
u-boot: extend UBOOT_CONFIG format to support different binary name
When using UBOOT_CONFIG format, the final u-boot binary for each config
may have different names. Extend UBOOT_CONFIG format to support different
binary to be copied.
The new format is supposed to be compatible with old one as ${UBOOT_BINARY}
is copied by default, and images,binary can be empty.
An example format to specify it, in the machine, is:
UBOOT_CONFIG ??= "sdcard-ifc sdcard-qspi lpuart qspi secure-boot nor"
UBOOT_CONFIG[nor] = "ls1021atwr_nor_config,,u-boot-dtb.bin"
UBOOT_CONFIG[sdcard-ifc] = "ls1021atwr_sdcard_ifc_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[sdcard-qspi] = "ls1021atwr_sdcard_qspi_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[lpuart] = "ls1021atwr_nor_lpuart_config,,u-boot-dtb.bin"
UBOOT_CONFIG[qspi] = "ls1021atwr_qspi_config,,u-boot-dtb.bin"
UBOOT_CONFIG[secure-boot] = "ls1021atwr_nor_SECURE_BOOT_config"
Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Wed, 22 Jun 2016 03:22:42 +0000 (23:22 -0400)]
e2fsprogs: tweak mke2fs ext4 features
While e2fsprogs upgraded to 1.43, it dropped the patch
Revert-mke2fs-enable-the-metadata_csum-and-64bit-fea.patch,
we get it back and rebase for 1.43 to fix invoking grub-probe
failed.
Without the fix:
...
root@localhost:~# mkfs.ext4 /dev/sda3
[skip]
root@localhost:~# grub-probe --target=fs -d /dev/sda3
grub-probe: error: unknown filesystem.
...
After apply the fix:
...
root@localhost:~# mkfs.ext4 /dev/sda3
[skip]
root@localhost:~# grub-probe --target=fs -d /dev/sda3
ext2
...
Ross Burton [Fri, 17 Jun 2016 17:53:20 +0000 (18:53 +0100)]
gst-player: upgrade to latest HEAD
Update to the latest revision now that we have gst-plugins-bad 1.8.x which has
integrated the GstPlayer object. This upstream is now just the user interface,
so remove all redundant items from the packaging and package the binaries in PN
instead of PN-bin.
Ross Burton [Tue, 21 Jun 2016 18:59:16 +0000 (19:59 +0100)]
puzzles: fix Samba conflict, clean up recipe
The impetus for this was that puzzles-extra contains /usr/bin/net which
conflicts with Samba. Hopefully it's not controversial to say that Samba has
priority here, so rename the binary in this recipe to puzzles-net.
Also fix the out-of-tree build problems (just run mkfiles in ${S}) so
autotools-brokensep doesn't need to be used.
Modernise the anonymous Python block.
Use ${bindir} instead of ${prefix}/bin.
Use autotools do_install and append instead of brokenly replicating the install
logic.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 21 Jun 2016 15:20:26 +0000 (11:20 -0400)]
linux-yocto/4.1: pstate backports
Backporting the following pstate changes:
fb0153332a1f intel_pstate: Add SKY-S support 7eb5c7e382a8 intel_pstate: enable HWP per CPU d73ee41f9786 x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h> f447e3d661f7 intel_pstate: Force setting target pstate when required 7db69b864737 intel_pstate: change some inconsistent debug information 367ff9c73d83 intel_pstate: Add tsc collection and keep previous target pstate
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 21 Jun 2016 15:20:25 +0000 (11:20 -0400)]
linux-yocto/4.1: driver, mmc and power backports
Backporting the following changes from the mainline kernel for improved
power, driver core and mmc support:
x86 tsc_msr: Remove irqoff around MSR-based TSC enumeration
x86 tsc_msr: Add Airmont reference clock values
x86 tsc_msr: Correct Silvermont reference clock values
x86 tsc_msr: Update comments, expand definitions
x86 tsc_msr: Remove debugging messages
x86 tsc_msr: Identify Intel-specific code
mmc: block: Pause re-tuning while switched to the RPMB partition
mmc: block: Always switch back to main area after RPMB access
mmc: core: Add a facility to "pause" re-tuning
mmc: block: Add new ioctl to send multi commands
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
cpuidle: Do not use CPUIDLE_DRIVER_STATE_START in cpuidle.c
cpuidle: Select a different state on tick_broadcast_enter() failures
sched / idle: Call default_idle_call() from cpuidle_enter_state()
sched / idle: Call idle_set_state() from cpuidle_enter_state()
cpuidle: Fix the kerneldoc comment for cpuidle_enter_state()
sched / idle: Eliminate the "reflect" check from cpuidle_idle_call()
cpuidle: Check the sign of index in cpuidle_reflect()
sched / idle: Move the default idle call code to a separate function
powercap / RAPL: Add support for Broadwell-H
module: add extra argument for parse_params() callback
Driver core: wakeup the parent device before trying probe
base:dd - Fix for typo in comment to function driver_deferred_probe_trigger().
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 21 Jun 2016 15:20:24 +0000 (11:20 -0400)]
linux-yocto/4.1: SPI, MFD, alsa and perf backports
Backporting the following mainline support for enhanced/improved support
on BXT based platforms.
spi: pxa2xx: Fix too early chipselect deassert
spi: pxa2xx: Update comment in int_transfer_complete()
spi: pxa2xx: Print actual DMA/PIO transfer mode in debug messages
spi: atmel: remove warning when !CONFIG_PM_SLEEP
spi: fix kernel-doc warnings in spi.h
spi: expose spi_master and spi_device statistics via sysfs
spi: meson: Fix module autoload for OF platform driver
spi: bcm2835: BUG: fix wrong use of PAGE_MASK
spi: bcm2835: fix overflow in calculation of transfer time
spi: bcm2835: bcm2835_dma_release() can be static
spi: bcm2835: fix kbuild compile warnings/errors and a typo
spi: bcm2835: enable dma modes for transfers meeting certain conditions
spi: bcm2835: fallback to interrupt for polling timeouts exceeding 2 jiffies
spi: spi-pxa2xx: Remove unused legacy null dma buffer and allocation for it
mfd: intel-lpss: Save register context on suspend
mfd: intel-lpss: Pass I2C configuration via properties on BXT
perf/x86: Fix time_shift in perf_event_mmap_page
perf/x86: Improve accuracy of perf/sched clock
ALSA: hda - Move send_cmd / get_response to hdac_bus_ops
ALSA: hda - Merge codec and controller helpers
ALSA: hda - moved alloc/free stream pages function to controller library
ALSA: hda - Add DSP loader to core library code
ALSA: hda - Add the controller helper codes to hda-core module
ALSA: hda - Handle error from get_response bus ops directly
Revert "ALSA: hda - fix number of devices query on hotplug"
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 21 Jun 2016 15:20:23 +0000 (11:20 -0400)]
linux-yocto/4.1: tpm2, pinctrl, powercap and watchdog backports
Backporting the following changes from the mainline kernel to enhance/add
support for tpm2, pinctrl, powercap and watchdog:
634eecdb20b watchdog: omap_wdt: fix null pointer dereference 79dcc6dabe63 Watchdog: Fix parent of watchdog_devices 94a2e8f1d47e watchdog: st_wdt: Update IP layout information to include Clocksource 3a74938a9610 watchdog: st_wdt: Add new driver for ST's LPC Watchdog fb6b94faa82c watchdog: digicolor: driver for Conexant Digicolor CX92755 SoC 22fb7b1353dd watchdog: omap_wdt: early_enable module parameter aa70c2480483 watchdog: omap_wdt: implement get_timeleft 47b7a1a5f70f watchdog: docs: omap_wdt also understands nowayout 9d833b82f706 watchdog: omap: put struct watchdog_device into driver data 87ded7189286 watchdog: omap: use watchdog_init_timeout instead of open coding it abccc104fcad watchdog: da9062: DA9062 watchdog driver 95f8b1024989 pinctrl: intel: fix offset calculation issue of register PAD_OWN 8e6606474fa0 pinctrl: intel: fix bug of register offset calculation 2423468cb317 MAINTAINERS: add new maintainer for TPM DEVICE DRIVER cf94113f05a6 sysfs: added __compat_only_sysfs_link_entry_to_kobj() cdb63d5cd801 tpm: fix missing migratable flag in sealing functionality for TPM2 95f738feaafe keys, trusted: seal/unseal with TPM 2.0 chips 92eb9052fd50 tpm: seal/unseal for TPM 2.0 d9c7bb89ec85 keys, trusted: move struct trusted_key_options to trusted-type.h a3b394e91b31 tpm: introduce tpm_buf bd68d3a21139 tpm: move the PPI attributes to character device directory. 54fb01659b83 tpm, tpm_crb: fix unaligned read of the command buffer address 0ab522f5ef11 powercap / RAPL: disable the 2nd power limit properly 9ba8c36e9ea7 thermal/powerclamp: remove cpu whitelist 2971561c8fc9 thermal/powerclamp: add cpu id for Skylake u/y cec457da34d0 thermal/powerclamp: add cpu id for denlow platform fc30ea2abdc5 thermal/powerclamp: add cpu id for skylake h/s 3eea18356747 intel powerclamp: support Knights Landing
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Mon, 20 Jun 2016 18:23:53 +0000 (15:23 -0300)]
initramfs-framework: base: Ensures /run/lock is available
Depending on the module we use, the /run/lock may be required. This
creates it as part of initial setup and thus makes it available for
every sub module.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Mon, 20 Jun 2016 18:23:52 +0000 (15:23 -0300)]
initramfs-framework: mdev: Add a runtime dependency on busybox-mdev
The mdev support relies on the mdev support inside busybox, which thus
builds the busybox-mdev package. Adding the runtime dependency ensures
its installation fails if mdev support is disabled.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linux-firmware: add iwlwifi-misc package for remaining iwlwifi firmware
Package all remaining iwlwifi firmwares that are not individually
packaged into a single package. This is distinct from the virtual
linux-firmware-iwlwifi package so that the -misc firmwares can be
installed without pulling in all other firmwares via dependencies.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 20 Jun 2016 16:37:31 +0000 (17:37 +0100)]
oeqa/targetbuild: add extra_cmds argument to run_configure
Some upstreams need more than just gnu-configize ran before ./configure works,
such as ./autogen.sh or autoreconf. Add extra_args (defaulting to
gnu-configize) so that this can be done in test cases.
Armin Kuster [Tue, 14 Jun 2016 21:50:22 +0000 (14:50 -0700)]
tzdata: update to 2016e
Changes affecting future time stamps
Africa/Cairo observes DST in 2016 from July 7 to the end of October.
Guess October 27 and 24:00 transitions. (Thanks to Steffen Thorsen.)
For future years, guess April's last Thursday to October's last
Thursday except for Ramadan.
Changes affecting past time stamps
Locations while uninhabited now use '-00', not 'zzz', as a
placeholder time zone abbreviation. This is inspired by Internet
RFC 3339 and is more consistent with numeric time zone
abbreviations already used elsewhere. The change affects several
arctic and antarctic locations, e.g., America/Cambridge_Bay before
1920 and Antarctica/Troll before 2005.
Asia/Baku's 1992-09-27 transition from +04 (DST) to +04 (non-DST) was
at 03:00, not 23:00 the previous day. (Thanks to Michael Deckers.)
Armin Kuster [Tue, 14 Jun 2016 21:50:21 +0000 (14:50 -0700)]
tzcode: update to 2016e
V2: typo in title (jet lagged)
Changes to code
zic now outputs a dummy transition at time 2**31 - 1 in zones
whose POSIX-style TZ strings contain a '<'. This mostly works
around Qt bug 53071 <https://bugreports.qt.io/browse/QTBUG-53071>.
(Thanks to Zhanibek Adilbekov for reporting the Qt bug.)
Changes affecting documentation and commentary
tz-link.htm says why governments should give plenty of notice for
time zone or DST changes, and refers to Matt Johnson's blog post.
tz-link.htm mentions Tzdata for Elixir. (Thanks to Matt Johnson.)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 20 Jun 2016 12:13:09 +0000 (13:13 +0100)]
bitbake.conf: don't set CCACHE_DIR to $HOME by default
If the user hasn't inherited ccache.bbclass then CCACHE_DIR is set to $HOME.
This was to work around a bug (#2554) for some users where if ccache < 3.1.10
(released 2014-10-19) was installed and enabled by default (i.e. /usr/bin/gcc is
a symlink to ccache) and ccache.bbclass wasn't being inherited then autogen
would fail to build because it sets $HOME to /dev/null during the build and
ccache (prior to 3.1.10) would always create CCACHE_DIR even if it was disabled.
As the default is $HOME/.ccache, this results in ccache attempting to create
/dev/null/.ccache.
However there was a mistake in this assignment of CCACHE_DIR - it should be
$HOME/.ccache - as ccache will do cleanup inside CCACHE_DIR which will result in
it deleting $HOME/tmp. In the future when we can assume that everyone has
ccache 3.1.10 onwards this assignment can be deleted, but as of now we still
support OpenSUSE 13.2 which ships with 3.1.9 so fix the assignment to be
$HOME/.ccache.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matthew Campbell [Tue, 14 Jun 2016 21:34:18 +0000 (17:34 -0400)]
openssh: fix init script restart with read-only-rootfs
restart in the init script uses the check_config() function which doesn't have
the $SSHD_OPTS passed through. This causes it to check the wrong config (and
fail when read-only-rootfs is enabled.
Signed-off-by: Matthew Campbell <mcampbell@izotope.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 15 Jun 2016 14:52:52 +0000 (15:52 +0100)]
autotools: ensure Makefile exists in do_compile
If a recipe is using the autotools class then presumably it is using Makefiles.
However the default do_compile() is forgiving and silently handles a missing
makefile, which means that if a recipe is using a hand-coded static Makefile
(e.g. git) but doesn't use brokensep the recipe will fail in do_install.
To make debugging this easier, override do_compile in autotools so that it fails
if a Makefile isn't present.
Ross Burton [Wed, 15 Jun 2016 11:01:23 +0000 (12:01 +0100)]
oeqa: fix hasPackage, add hasPackageMatch
hasPackage() was looking for the string provided as an RE substring in the
manifest, which resulted in a large number of false positives (i.e. libgtkfoo
would match "gtk+").
Rewrite the manifest loader to parse the files into a proper data structure,
change hasPackage to do full string matches, and add hasPackageMatch which does
RE substring matches.
Ross Burton [Fri, 17 Jun 2016 12:13:33 +0000 (13:13 +0100)]
xcb-proto: use python3 instead of python2
We previously patched configure to stop looking around for a Python to use, and
to use the Python binary and install paths that we specify. Now that we depend
on Python 3 its possible that bitbake is being built on a machine without Python
2 installed, so hardcode the python3 interpreter instead.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Thu, 16 Jun 2016 19:11:25 +0000 (12:11 -0700)]
sdk-manual: Updated configure.ac file in helloworld example.
The file was named 'configure.in' and was slightly different than
what it needed to be in order to work. The file needs to be named
'configure.ac' and have slightly different contents. Fixed both.
Scott Rifenbark [Tue, 14 Jun 2016 18:39:31 +0000 (11:39 -0700)]
dev-manual: Updated Runtime Testing for Package Installation
Fixes [YOCTO #9672]
Updated the "Exporting Tests" section to reflect the proper
local.conf settings.
Added a new section "Installing Packages in the DUT Without the
Package Manager" that describes how to use a JSON file to accomplish
package installation on a Device Under Test without a package
manager.
Scott Rifenbark [Tue, 7 Jun 2016 22:28:26 +0000 (15:28 -0700)]
ref-manual: Edits to UPSTREAM_CHECK_* variables.
Fixes [YOCTO #9671]
Applied some review comments to these three variables.
Edits to be sure to qualify that the variables only to recipes
who inherit the distrodata class.
Edited the sections in the "Working with Packages" section
beginning with the "Build Considerations" section with text
received from Daniela Placencia.
Order is not preserved in dict() and this code depends on the order of
these lists of package architectures used when multilibs are enabled.
This caused 'random' breakage where sometimes the correct order was present
and sometimes it wasn't.
Use collections.OrderedDict() to avoid this problem.
Kudos to Bill Randle and Alejandro Hernandez who did most of the work debugging
this, I simply took the problem they identified and wrote a patch to fix it.
This unblocks the M1 build but this code needs auditing as there are clearly
other ordering issues (e.g. the set() usage).
Ed Bartosh [Mon, 20 Jun 2016 11:00:52 +0000 (14:00 +0300)]
bitbake: cooker: clean up EvertWriter
Restructured EventWriter code to make it more readable:
- got rid of init_file method as it's called only once
- renamed exception variable e -> err
- renamed event variable e -> evt
- simplified main 'if' structure of send method
Ed Bartosh [Mon, 20 Jun 2016 11:00:51 +0000 (14:00 +0300)]
bitbake: cooker: replace EventLogWriteHandler with namedtuple
class EventLogWriteHandler is a simple wrapper class with only one
class member. Replacing it with namedtuple makes code less nested and more
readable.
Ed Bartosh [Mon, 20 Jun 2016 11:00:48 +0000 (14:00 +0300)]
bitbake: cooker: move EventLogWriteHandler to the top module level
EventLogWriteHandler object was created and used in
BBCooker.initConfigurationData.
This causes creation of multiple EventLogWriteHandler objects
and results in duplicated entries in the output event file
as BBCooker.initConfigurationData is called multiple times.
Added eventlogfile parameter to EventLogWriteHandler to avoid using
global variable DEFAULT_EVENTFILE.
Moved EventLogWriteHandler to the module level.
Created EventLogWriteHandler object in BBCooker.__init__ to ensure that only
one handler object is created.
Jose Pardeiro [Fri, 17 Jun 2016 15:01:17 +0000 (17:01 +0200)]
cmake.bbclass: set the modules directory correctly
The CMake recipes contain a mismatch between the environmental variable
which defines where the Modules are installed and the location where they
actually are. This patch fixes the environmental variable to point to the
proper folder defined according to the cmake version.
Ed Bartosh [Fri, 17 Jun 2016 15:47:23 +0000 (18:47 +0300)]
pseudo: remove rpath from libpseudo.so
Setting rpath causes clash of host and sdk libc and makes
pseudo to crash with relocation error: libpthread.so.0:
symbol __libc_vfork, version GLIBC_PRIVATE not defined
in file libc.so.6 with link time reference
Removing rpath fixes this as it makes pseudo to use only host
pthread and libc.
useradd-staticids.bbclass: Allow missing UIDs/GIDs to generate warnings
Previously when USERADD_ERROR_DYNAMIC was set to "1", an exception was
raised if no numeric UID/GID could be determined for a user/group. Now
it is possible to set it to either "error", which results in the old
behavior, or "warn" in which case a warning is issued instead.
For backwards compatibility reasons, it is still possible to set
USERADD_ERROR_DYNAMIC to "1" and get an exception in case of failure.
useradd-staticids.bbclass: Restore failure on missing UIDs/GIDs
A regression was introduced with commit 3149319a whereby setting
USERADD_ERROR_DYNAMIC no longer resulted in an error for users and
groups that were missing numeric UIDs and GIDs but were not mentioned
at all in any passwd or groups file.
Ross Burton [Fri, 17 Jun 2016 12:13:34 +0000 (13:13 +0100)]
packagegroup-self-hosted: add back Python 2
Some recipes depend on Python 2 being present (eg glib and ncurses) so until
they've all been migrated to Python 3 we should continue to ship Python 2 in the
self-hosted packagegroup.
Juro Bystricky [Thu, 16 Jun 2016 20:32:23 +0000 (13:32 -0700)]
build-appliance-image: Install network components
Explicitly add network components into Build Appliance image,
do not rely on packagegroup-self-hosted to pull them in.
Network related dependencies were removed from packagegroup-self-hosted.
Andrew Bradford [Thu, 9 Jun 2016 13:44:08 +0000 (09:44 -0400)]
bitbake: fetch2/perforce: Rework to support SRCREV and P4CONFIG
In recipes which use the perforce fetcher, enable use of SRCREV to
specify any of: ${AUTOREV}, changelist number, p4date, or label. This
is more in-line with how the other fetchers work for source control
systems.
Allow p4 to use the P4CONFIG env variable to define the server URL,
username, and password if not provided in a recipe.
This does change existing perforce fetcher usage by recipes and will
likely need those recipes which use the perforce fetcher to be updated.
No recipes in oe-core use the perforce fetcher.
Stephano Cetola [Fri, 10 Jun 2016 17:56:38 +0000 (10:56 -0700)]
bitbake: fetch2: fix unpacking of deb packages
Python 3 changed the return value of check_output to binary rather than
a string. This fix decodes the binary before calling splitlines, which
requires a string.
Elliot Smith [Thu, 16 Jun 2016 14:02:00 +0000 (15:02 +0100)]
bitbake: toaster: fix typo which causes table searches to fail
The iterator used to create a search query refers to a
variable "x" which isn't set, causing an "'x' is not defined" error
and preventing table searches (on non-ToasterTables) from working.
Use the "field" variable instead, which contains the name of the
field to add to the query.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Fri, 10 Jun 2016 11:58:17 +0000 (14:58 +0300)]
bitbake: bitbake: fix wrong usage of format_exc
First parameter of traceback.format_exc is a 'limit' - a number
of stracktraces to format.
Passing exception object to format_exc is incorrect, but it works in
Python 2 as this code from traceback module works:
while tb is not None and (limit is None or n < limit):
Comparing integer counter n with the exception object in Python 2
always results in True. However, in Python 3 it throws exception:
TypeError: unorderable types: int() < <Exception type>()
As format_exc is used in except block of handling another
exception this can cause hard to find and debug bugs.
This packagegroup previously included oprofileui-server which indirectly
depended on binutils-symlinks. Since the removal of oprofileui-server
binutils-symlinks wasn't pulled in, which makes a packagegroup apparently for
development on the target fairly useless (and also broke QA).
Andre McCurdy [Tue, 14 Jun 2016 22:51:06 +0000 (15:51 -0700)]
directfb: fix client->gfx_state initialisation
Shortly before the DirectFB 1.7.7 release, an optimisation was added
to CoreGraphicsStateClient_Init() to avoid creating an extended
Graphics State object if it will not later be required:
4d422fb Client: Create extended Graphics State object when needed for later usage
Unfortunately the client->gfx_state variable used to track the
extended Graphics State object is not initialised, which can lead to
crashes etc due to creation of the Graphics State object erroneously
being skipped.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
