The micro-USB connector on Motorola Mapphone devices can be muxed between
the SoC and the mdm6600 modem. But even when used for the SoC, configuring
the PHY with ID pin grounded will wake up the modem from idle state. Looks
like the issue is probably caused by line glitches.
We can prevent the glitches by using a previously unknown mode of the
GPIO mux to prevent the USB lines from being connected to the moden while
configuring the USB PHY, and enable the USB lines after configuring the
PHY.
Note that this only prevents waking up mdm6600 as regular USB A-host mode,
and does not help when connected to a lapdock. The lapdock specific issue
still needs to be debugged separately.
Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's typical for the QHP PHY to take slightly above 1ms to initialize,
so increase the timeout of the PHY ready check to 10ms - as already done
in the downstream PCIe driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Evan Green <evgreen@chromium.org> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Acer SW5-012 2-in-1 keyboard dock uses a Synaptics S91028 touchpad
which is connected to an ITE 8595 USB keyboard controller chip.
This keyboard has the same quirk for its rfkill / airplane mode hotkey as
other keyboards with the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds this keyboards USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementations of ops->bind_class() are merely
searching for classid and updating class in the struct tcf_result,
without invoking either of cl_ops->bind_tcf() or
cl_ops->unbind_tcf(). This breaks the design of them as qdisc's
like cbq use them to count filters too. This is why syzbot triggered
the warning in cbq_destroy_class().
In order to fix this, we have to call cl_ops->bind_tcf() and
cl_ops->unbind_tcf() like the filter binding path. This patch does
so by refactoring out two helper functions __tcf_bind_filter()
and __tcf_unbind_filter(), which are lockless and accept a Qdisc
pointer, then teaching each implementation to call them correctly.
Note, we merely pass the Qdisc pointer as an opaque pointer to
each filter, they only need to pass it down to the helper
functions without understanding it at all.
Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class") Reported-and-tested-by: syzbot+0a0596220218fcb603a8@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+63bdb6006961d8c917c6@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+03c4738ed29d5d366ddf@syzkaller.appspotmail.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Cc: stable <stable@vger.kernel.org> # 3.4 Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Fixes: 9150c3adbf24 ("CIFS: Close open handle after interrupted close") Cc: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The chelsio crypto driver is casting 'struct crypto_aead' directly to
'struct crypto_tfm', which is incorrect because the crypto_tfm isn't the
first field of 'struct crypto_aead'. Consequently, the calls to
crypto_tfm_set_flags() are modifying some other field in the struct.
Also, the driver is setting CRYPTO_TFM_RES_BAD_KEY_LEN in
->setauthsize(), not just in ->setkey(). This is incorrect since this
flag is for bad key lengths, not for bad authentication tag lengths.
Fix these bugs by removing the broken crypto_tfm_set_flags() calls from
->setauthsize() and by fixing them in ->setkey().
Fixes: 324429d74127 ("chcr: Support for Chelsio's Crypto Hardware") Cc: <stable@vger.kernel.org> # v4.9+ Cc: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support")
assumes that gyro in LSM9DS0 is the same as others with 0xd4 WAI ID,
but datasheet tells slight different story, i.e. the first scale factor
for the chip is 245 dps, and not 250 dps.
Correct this by introducing a separate settings for LSM9DS0.
Fixes: 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support")
Depends-on: 45a4e4220bf4 ("iio: gyro: st_gyro: fix L3GD20H support") Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The match data does not have to be a struct device pointer, and indeed
very often is not. Attempt to treat it as such easily results in a
crash.
For the components that are not registered, we don't know which device
is missing. Once it it is there, we can use the struct component to get
the device and whether it's bound or not.
Unbinding the bcm2835aux UART driver raises the following error if the
maximum number of 8250 UARTs is set to 1 (via the 8250.nr_uarts module
parameter or CONFIG_SERIAL_8250_RUNTIME_UARTS):
That's because bcm2835aux_serial_probe() retrieves UART line number 1
from the devicetree and stores it in data->uart.port.line, while
serial8250_register_8250_port() instead uses UART line number 0,
which is stored in data->line.
On driver unbind, bcm2835aux_serial_remove() uses data->uart.port.line,
which contains the wrong number. Fix it.
The issue does not occur if the maximum number of 8250 UARTs is >= 2.
Fixes: bdc5f3009580 ("serial: bcm2835: add driver for bcm2835-aux-uart") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.6+ Cc: Martin Sperl <kernel@martin.sperl.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/912ccf553c5258135c6d7e8f404a101ef320f0f4.1579175223.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver reporting IEEE80211_TX_STAT_ACK is not being handled
correctly. The driver should only report on TSR_TMO flag is not
set indicating no transmission errors and when not IEEE80211_TX_CTL_NO_ACK
is being requested.
Currently when the call to prism2sta_ifst fails a netdev_err error
is reported, error return variable result is set to -1 but the
function always returns 0 for success. Fix this by returning
the error value in variable result rather than 0.
Addresses-Coverity: ("Unused value") Fixes: 00b3ed168508 ("Staging: add wlan-ng prism2 usb driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200114181604.390235-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the length of the socket buffer is 0xFFFFFFFF (max size for an
unsigned int), then payload_len becomes 0xFFFFFFF1 after subtracting 14
(ETH_HLEN). Then, mdp_len is set to payload_len + 16 (MDP_HDR_LEN)
which overflows and results in a value of 2. These values for
payload_len and mdp_len will pass current buffer size checks.
This patch checks if derived from skb->len sum may overflow.
The check is based on the following idea:
For any `unsigned V1, V2` and derived `unsigned SUM = V1 + V2`,
`V1 + V2` overflows iif `SUM < V1`.
VBUS should be turned off when leaving the host mode.
Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to
turn off VBUS power.
Fixes: 5f94adfeed97 ("usb: dwc3: core: refactor mode initialization to its own function") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
switched to using the generic write implementation which may combine
multiple write requests into larger transfers. This can break the IrLAP
protocol where end-of-frame is determined using the USB short packet
mechanism, for example, if multiple frames are sent in rapid succession.
Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.
This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).
Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Cc: stable <stable@vger.kernel.org> # 2.6.27 Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing endpoint sanity check to avoid dereferencing a NULL-pointer
on open() in case a device lacks a bulk-out endpoint.
Note that prior to commit f4a4cbb2047e ("USB: ir-usb: reimplement using
generic framework") the oops would instead happen on open() if the
device lacked a bulk-in endpoint and on write() if it lacked a bulk-out
endpoint.
- Missing arm64 hot(un)plug support
- Missing some vmem_altmap_offset() cleanups
- Missing sub-section hotadd support
- Missing unification of mm/hmm.c and kernel/memremap.c
-- snip --
We currently try to shrink a single zone when removing memory. We use
the zone of the first page of the memory we are removing. If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):
Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that. We now
properly shrink the zones, even if we have DIMMs whereby
- Some memory blocks fall into no zone (never onlined)
- Some memory blocks fall into multiple zones (offlined+re-onlined)
- Multiple memory blocks that fall into different zones
Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().
Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only contextual issues:
- Unrelated check_and_unmap_cpu_on_node() changes are missing.
- Unrelated walk_memory_blocks() has not been moved/refactored yet.
-- snip --
try_offline_node() is pretty much broken right now:
- The node span is updated when onlining memory, not when adding it. We
ignore memory that was mever onlined. Bad.
- We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily
trigger a kernel panic. Bad for memory that is offline but also bad
for subsection hotadd with ZONE_DEVICE, whereby the memmap of the
first PFN of a section might contain garbage.
- Sections belonging to mixed nodes are not properly considered.
As memory blocks might belong to multiple nodes, we would have to walk
all pageblocks (or at least subsections) within present sections.
However, we don't have a way to identify whether a memmap that is not
online was initialized (relevant for ZONE_DEVICE). This makes things
more complicated.
Luckily, we can piggy pack on the node span and the nid stored in memory
blocks. Currently, the node span is grown when calling
move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when
removing memory, before calling try_offline_node(). Sysfs links are
created via link_mem_sections(), e.g., during boot or when adding
memory.
If the node still spans memory or if any memory block belongs to the
nid, we don't set the node offline. As memory blocks that span multiple
nodes cannot get offlined, the nid stored in memory blocks is reliable
enough (for such online memory blocks, the node still spans the memory).
Introduce for_each_memory_block() to efficiently walk all memory blocks.
Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span
when removing ZONE_DEVICE memory to fix similar issues (access of
garbage memmaps) - until we have a reliable way to identify whether
these memmaps were properly initialized. This implies later, that once
a node had ZONE_DEVICE memory, we won't be able to set a node offline -
which should be acceptable.
Since commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") memory that is added is not
assoziated with a zone/node (memmap not initialized). The introducing
commit 60a5a19e7419 ("memory-hotplug: remove sysfs file of node")
already missed that we could have multiple nodes for a section and that
the zone/node span is updated when onlining pages, not when adding them.
I tested this by hotplugging two DIMMs to a memory-less and cpu-less
NUMA node. The node is properly onlined when adding the DIMMs. When
removing the DIMMs, the node is properly offlined.
- Missing mm/hmm.c and kernel/memremap.c unification.
-- hmm code does not need fixes (no altmap)
- Missing 7cc7867fb061 ("mm/devm_memremap_pages: enable sub-section remap")
-- snip --
Patch series "mm/memory_hotplug: Shrink zones before removing memory",
v6.
This series fixes the access of uninitialized memmaps when shrinking
zones/nodes and when removing memory. Also, it contains all fixes for
crashes that can be triggered when removing certain namespace using
memunmap_pages() - ZONE_DEVICE, reported by Aneesh.
We stop trying to shrink ZONE_DEVICE, as it's buggy, fixing it would be
more involved (we don't have SECTION_IS_ONLINE as an indicator), and
shrinking is only of limited use (set_zone_contiguous() cannot detect
the ZONE_DEVICE as contiguous).
We continue shrinking !ZONE_DEVICE zones, however, I reduced the amount
of code to a minimum. Shrinking is especially necessary to keep
zone->contiguous set where possible, especially, on memory unplug of
DIMMs at zone boundaries.
Zones are now properly shrunk when offlining memory blocks or when
onlining failed. This allows to properly shrink zones on memory unplug
even if the separate memory blocks of a DIMM were onlined to different
zones or re-onlined to a different zone after offlining.
With an altmap, the memmap falling into the reserved altmap space are not
initialized and, therefore, contain a garbage NID and a garbage zone.
Make sure to read the NID/zone from a memmap that was initialized.
This fixes a kernel crash that is observed when destroying a namespace:
kernel BUG at include/linux/mm.h:1107!
cpu 0x1: Vector: 700 (Program Check) at [c000000274087890]
pc: c0000000004b9728: memunmap_pages+0x238/0x340
lr: c0000000004b9724: memunmap_pages+0x234/0x340
...
pid = 3669, comm = ndctl
kernel BUG at include/linux/mm.h:1107!
devm_action_release+0x30/0x50
release_nodes+0x268/0x2d0
device_release_driver_internal+0x174/0x240
unbind_store+0x13c/0x190
drv_attr_store+0x44/0x60
sysfs_kf_write+0x70/0xa0
kernfs_fop_write+0x1ac/0x290
__vfs_write+0x3c/0x70
vfs_write+0xe4/0x200
ksys_write+0x7c/0x140
system_call+0x5c/0x68
The "page_zone(pfn_to_page(pfn)" was introduced by 69324b8f4833 ("mm,
devm_memremap_pages: add MEMORY_DEVICE_PRIVATE support"), however, I
think we will never have driver reserved memory with
MEMORY_DEVICE_PRIVATE (no altmap AFAIKS).
[david@redhat.com: minimze code changes, rephrase description] Link: http://lkml.kernel.org/r/20191006085646.5768-2-david@redhat.com Fixes: 2c2a5af6fed2 ("mm, memory_hotplug: add nid parameter to arch_remove_memory") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Damian Tometzki <damian.tometzki@gmail.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't allow to offline memory block devices that belong to multiple
numa nodes. Therefore, such devices can never get removed. It is
sufficient to process a single node when removing the memory block. No
need to iterate over each and every PFN.
We already have the nid stored for each memory block. Make sure that the
nid always has a sane value.
Please note that checking for node_online(nid) is not required. If we
would have a memory block belonging to a node that is no longer offline,
then we would have a BUG in the node offlining code.
Link: http://lkml.kernel.org/r/20190719135244.15242-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The zone type check was a leftover from the cleanup that plumbed altmap
through the memory hotplug path, i.e. commit da024512a1fa "mm: pass the
vmem_altmap to arch_remove_memory and __remove_pages".
Link: http://lkml.kernel.org/r/156092352642.979959.6664333788149363039.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [ppc64] Cc: Michal Hocko <mhocko@suse.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parameter is unused, so let's drop it. Memory removal paths should
never care about zones. This is the job of memory offlining and will
require more refactorings.
Link: http://lkml.kernel.org/r/20190527111152.16324-12-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arun KS <arunks@codeaurora.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We really don't want anything during memory hotunplug to fail. We
always pass a valid memory block device, that check can go. Avoid
allocating memory and eventually failing. As we are always called under
lock, we can use a static piece of memory. This avoids having to put
the structure onto the stack, having to guess about the stack size of
callers.
Patch inspired by a patch from Oscar Salvador.
In the future, there might be no need to iterate over nodes at all.
mem->nid should tell us exactly what to remove. Memory block devices
with mixed nodes (added during boot) should properly fenced off and
never removed.
Link: http://lkml.kernel.org/r/20190527111152.16324-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arun KS <arunks@codeaurora.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Let's factor out removing of memory block devices, which is only
necessary for memory added via add_memory() and friends that created
memory block devices. Remove the devices before calling
arch_remove_memory().
This finishes factoring out memory block device handling from
arch_add_memory() and arch_remove_memory().
Link: http://lkml.kernel.org/r/20190527111152.16324-10-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Oscar Salvador <osalvador@suse.de> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only memory to be added to the buddy and to be onlined/offlined by user
space using /sys/devices/system/memory/... needs (and should have!)
memory block devices.
Factor out creation of memory block devices. Create all devices after
arch_add_memory() succeeded. We can later drop the want_memblock
parameter, because it is now effectively stale.
Only after memory block devices have been added, memory can be onlined
by user space. This implies, that memory is not visible to user space
at all before arch_add_memory() succeeded.
While at it
- use WARN_ON_ONCE instead of BUG_ON in moved unregister_memory()
- introduce find_memory_block_by_id() to search via block id
- Use find_memory_block_by_id() in init_memory_block() to catch
duplicates
Link: http://lkml.kernel.org/r/20190527111152.16324-8-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <cai@lca.pw> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want to improve error handling while adding memory by allowing to use
arch_remove_memory() and __remove_pages() even if
CONFIG_MEMORY_HOTREMOVE is not set to e.g., implement something like:
arch_add_memory()
rc = do_something();
if (rc) {
arch_remove_memory();
}
We won't get rid of CONFIG_MEMORY_HOTREMOVE for now, as it will require
quite some dependencies for memory offlining.
Link: http://lkml.kernel.org/r/20190527111152.16324-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Rob Herring <robh@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Qian Cai <cai@lca.pw> Cc: Mathieu Malaterre <malat@debian.org> Cc: Baoquan He <bhe@redhat.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All callers of arch_remove_memory() ignore errors. And we should really
try to remove any errors from the memory removal path. No more errors are
reported from __remove_pages(). BUG() in s390x code in case
arch_remove_memory() is triggered. We may implement that properly later.
WARN in case powerpc code failed to remove the section mapping, which is
better than ignoring the error completely right now.
Link: http://lkml.kernel.org/r/20190409100148.24703-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Agner <stefan@agner.ch> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Herring <robh@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Qian Cai <cai@lca.pw> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mike Travis <mike.travis@hpe.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix the below section mismatch warnings.
WARNING: vmlinux.o(.text+0x2d1f44): Section mismatch in reference from the function devm_memremap_pages_release() to the function .meminit.text:arch_remove_memory()
WARNING: vmlinux.o(.text+0x2d265c): Section mismatch in reference from the function devm_memremap_pages() to the function .meminit.text:arch_add_memory()
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Let's just warn in case a section is not valid instead of failing to
remove somewhere in the middle of the process, returning an error that
will be mostly ignored by callers.
Link: http://lkml.kernel.org/r/20190409100148.24703-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Qian Cai <cai@lca.pw> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Failing while removing memory is mostly ignored and cannot really be
handled. Let's treat errors in unregister_memory_section() in a nice way,
warning, but continuing.
Link: http://lkml.kernel.org/r/20190409100148.24703-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Qian Cai <cai@lca.pw> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The remove_memory_block() function was renamed to in commit cc292b0b4302 ("drivers/base/memory.c: rename remove_memory_block() to
remove_memory_section()").
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The input parameter 'phys_index' of memory_block_action() is actually the
section number, but not the phys_index of memory_block. This is a relic
from the past when one memory block could only contain one section.
Rename it to start_section_nr.
And also in remove_memory_section(), the 'node_id' and 'phys_device'
arguments are not used by anyone. Remove them.
Link: http://lkml.kernel.org/r/20190329144250.14315-2-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm/memory_hotplug: Better error handling when removing
memory", v1.
Error handling when removing memory is somewhat messed up right now. Some
errors result in warnings, others are completely ignored. Memory unplug
code can essentially not deal with errors properly as of now.
remove_memory() will never fail.
We have basically two choices:
1. Allow arch_remov_memory() and friends to fail, propagating errors via
remove_memory(). Might be problematic (e.g. DIMMs consisting of multiple
pieces added/removed separately).
2. Don't allow the functions to fail, handling errors in a nicer way.
It seems like most errors that can theoretically happen are really corner
cases and mostly theoretical (e.g. "section not valid"). However e.g.
aborting removal of sections while all callers simply continue in case of
errors is not nice.
If we can gurantee that removal of memory always works (and WARN/skip in
case of theoretical errors so we can figure out what is going on), we can
go ahead and implement better error handling when adding memory.
E.g. via add_memory():
arch_add_memory()
ret = do_stuff()
if (ret) {
arch_remove_memory();
goto error;
}
Handling here that arch_remove_memory() might fail is basically
impossible. So I suggest, let's avoid reporting errors while removing
memory, warning on theoretical errors instead and continuing instead of
aborting.
This patch (of 4):
__add_pages() doesn't add the memory resource, so __remove_pages()
shouldn't remove it. Let's factor it out. Especially as it is a special
case for memory used as system memory, added via add_memory() and friends.
We now remove the resource after removing the sections instead of doing it
the other way around. I don't think this change is problematic.
Missing unification of mm/hmm.c and kernel/memremap.c
-- snip --
Patch series "Do not touch pages in hot-remove path", v2.
This patchset aims for two things:
1) A better definition about offline and hot-remove stage
2) Solving bugs where we can access non-initialized pages
during hot-remove operations [2] [3].
This is achieved by moving all page/zone handling to the offline
stage, so we do not need to access pages when hot-removing memory.
This is a preparation for the following-up patches. The idea of passing
the nid is that it will allow us to get rid of the zone parameter
afterwards.
Link: http://lkml.kernel.org/r/20181127162005.15833-2-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cb5e39b8038b ("drivers: base: refactor add_memory_section() to
add_memory_block()"), add_memory_block() is introduced, which is only
invoked in memory_dev_init().
When combining these two loops in memory_dev_init() and
add_memory_block(), they looks like this:
for (i = 0; i < NR_MEM_SECTIONS; i += sections_per_block)
for (j = i;
(j < i + sections_per_block) && j < NR_MEM_SECTIONS;
j++)
Since it is sure the (i < NR_MEM_SECTIONS) and j sits in its own memory
block, the check of (j < NR_MEM_SECTIONS) is not necessary.
This patch just removes this check.
Link: http://lkml.kernel.org/r/20181123222811.18216-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Seth Jennings <sjenning@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the information needed in sparse_add_one_section() is node id to
allocate proper memory, it is not necessary to pass its pgdat.
This patch changes the prototype of sparse_add_one_section() to pass node
id directly. This is intended to reduce misleading that
sparse_add_one_section() would touch pgdat.
Link: http://lkml.kernel.org/r/20181204085657.20472-2-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pgdat_resize_lock is used to protect pgdat's memory region information
like: node_start_pfn, node_present_pages, etc. While in function
sparse_add/remove_one_section(), pgdat_resize_lock is used to protect
initialization/release of one mem_section. This looks not proper.
These code paths are currently protected by mem_hotplug_lock currently but
should there ever be any reason for locking at the sparse layer a
dedicated lock should be introduced.
Following is the current call trace of sparse_add/remove_one_section()
The comment above the pgdat_resize_lock also mentions "Holding this will
also guarantee that any pfn_valid() stays that way.", which is true with
the current implementation and false after this patch. But current
implementation doesn't meet this comment. There isn't any pfn walkers to
take the lock so this looks like a relict from the past. This patch also
removes this comment.
[richard.weiyang@gmail.com: v4] Link: http://lkml.kernel.org/r/20181204085657.20472-1-richard.weiyang@gmail.com
[mhocko@suse.com: changelog suggestion] Link: http://lkml.kernel.org/r/20181128091243.19249-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3.
Reading through the code and studying how mem_hotplug_lock is to be used,
I noticed that there are two places where we can end up calling
device_online()/device_offline() - online_pages()/offline_pages() without
the mem_hotplug_lock. And there are other places where we call
device_online()/device_offline() without the device_hotplug_lock.
While e.g.
echo "online" > /sys/devices/system/memory/memory9/state
is fine, e.g.
echo 1 > /sys/devices/system/memory/memory9/online
Will not take the mem_hotplug_lock. However the device_lock() and
device_hotplug_lock.
E.g. via memory_probe_store(), we can end up calling
add_memory()->online_pages() without the device_hotplug_lock. So we can
have concurrent callers in online_pages(). We e.g. touch in
online_pages() basically unprotected zone->present_pages then.
Looks like there is a longer history to that (see Patch #2 for details),
and fixing it to work the way it was intended is not really possible. We
would e.g. have to take the mem_hotplug_lock in device/base/core.c, which
sounds wrong.
Summary: We had a lock inversion on mem_hotplug_lock and device_lock().
More details can be found in patch 3 and patch 6.
I propose the general rules (documentation added in patch 6):
1. add_memory/add_memory_resource() must only be called with
device_hotplug_lock.
2. remove_memory() must only be called with device_hotplug_lock. This is
already documented and holds for all callers.
3. device_online()/device_offline() must only be called with
device_hotplug_lock. This is already documented and true for now in core
code. Other callers (related to memory hotplug) have to be fixed up.
4. mem_hotplug_lock is taken inside of add_memory/remove_memory/
online_pages/offline_pages.
To me, this looks way cleaner than what we have right now (and easier to
verify). And looking at the documentation of remove_memory, using
lock_device_hotplug also for add_memory() feels natural.
This patch (of 6):
remove_memory() is exported right now but requires the
device_hotplug_lock, which is not exported. So let's provide a variant
that takes the lock and only export that one.
The lock is already held in
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
arch/powerpc/platforms/powernv/memtrace.c
Apart from that, there are not other users in the tree.
Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Juergen Gross <jgross@suse.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. It makes absolutely no sense to reset the neighbour and the
connection state after a (successful) nonblocking call of x25_connect.
This prevents any connection from being established, since the response
(call accept) cannot be processed.
2. Any further calls to x25_connect() while a call is pending should
simply return, instead of creating new Call Request (on different
logical channels).
This patch should also fix the "KASAN: null-ptr-deref Write in
x25_connect" and "BUG: unable to handle kernel NULL pointer dereference
in x25_connect" bugs reported by syzbot.
Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reported-by: syzbot+429c200ffc8772bfe070@syzkaller.appspotmail.com Reported-by: syzbot+eec0c87f31a7c3b66f7b@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This new helper function validates that unknown family and chain type
coming from userspace do not trigger an out-of-bound array access. Bail
out in case __nft_chain_type_get() returns NULL from
nft_chain_parse_hook().
The bitmap allocation did not use full unsigned long sizes
when calculating the required size and that was triggered by KASAN
as slab-out-of-bounds read in several places. The patch fixes all
of them.
In iscsi_if_rx func, after receiving one request through
iscsi_if_recv_msg func, iscsi_if_send_reply will be called to try to
reply to the request in a do-while loop. If the iscsi_if_send_reply
function keeps returning -EAGAIN, a deadlock will occur.
For example, a client only send msg without calling recvmsg func, then
it will result in the watchdog soft lockup. The details are given as
follows:
v4l2_vbi_format, v4l2_sliced_vbi_format and v4l2_sdr_format
have a reserved array at the end that should be zeroed by drivers
as per the V4L2 spec. Older drivers often do not do this, so just
handle this in the core.
add_ie_rates() copys rates without checking the length
in bss descriptor from remote AP.when victim connects to
remote attacker, this may trigger buffer overflow.
lbs_ibss_join_existing() copys rates without checking the length
in bss descriptor from remote IBSS node.when victim connects to
remote attacker, this may trigger buffer overflow.
Fix them by putting the length check before performing copy.
This fix addresses CVE-2019-14896 and CVE-2019-14897.
This also fix build warning of mixed declarations and code.
Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Wen Huang <huangwenabc@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :
BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544
caller is tmc_alloc_etf_buffer+0x5c/0x60
CPU: 2 PID: 2544 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x14/0x20
dump_stack+0x9c/0xc4
debug_smp_processor_id+0x10c/0x110
tmc_alloc_etf_buffer+0x5c/0x60
etm_setup_aux+0x1c4/0x230
rb_alloc_aux+0x1b8/0x2b8
perf_mmap+0x35c/0x478
mmap_region+0x34c/0x4f0
do_mmap+0x2d8/0x418
vm_mmap_pgoff+0xd0/0xf8
ksys_mmap_pgoff+0x88/0xf8
__arm64_sys_mmap+0x28/0x38
el0_svc_handler+0xd8/0x138
el0_svc+0x8/0xc
Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.
During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :
BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544
Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.
Commit 79c65d179a40e145 ("crypto: cbc - Convert to skcipher") updated
the generic CBC template wrapper from a blkcipher to a skcipher algo,
to get away from the deprecated blkcipher interface. However, as a side
effect, drivers that instantiate CBC transforms using the blkcipher as
a fallback no longer work, since skciphers can wrap blkciphers but not
the other way around. This broke the geode-aes driver.
So let's fix it by moving to the sync skcipher interface when allocating
the fallback. At the same time, align with the generic API for ECB and
CBC by rejecting inputs that are not a multiple of the AES block size.
Masato Suzuki [Mon, 27 Jan 2020 05:07:46 +0000 (14:07 +0900)]
sd: Fix REQ_OP_ZONE_REPORT completion handling
ZBC/ZAC report zones command may return less bytes than requested if the
number of matching zones for the report request is small. However, unlike
read or write commands, the remainder of incomplete report zones commands
cannot be automatically requested by the block layer: the start sector of
the next report cannot be known, and the report reply may not be 512B
aligned for SAS drives (a report zone reply size is always a multiple of
64B). The regular request completion code executing bio_advance() and
restart of the command remainder part currently causes invalid zone
descriptor data to be reported to the caller if the report zone size is
smaller than 512B (a case that can happen easily for a report of the last
zones of a SAS drive for example).
Since blkdev_report_zones() handles report zone command processing in a
loop until completion (no more zones are being reported), we can safely
avoid that the block layer performs an incorrect bio_advance() call and
restart of the remainder of incomplete report zone BIOs. To do so, always
indicate a full completion of REQ_OP_ZONE_REPORT by setting good_bytes to
the request buffer size and by setting the command resid to 0. This does
not affect the post processing of the report zone reply done by
sd_zbc_complete() since the reply header indicates the number of zones
reported.
Fixes: 89d947561077 ("sd: Implement support for ZBC devices") Cc: <stable@vger.kernel.org> # 4.19 Cc: <stable@vger.kernel.org> # 4.14 Signed-off-by: Masato Suzuki <masato.suzuki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
What I found out is that the expressions clear out the value once it is
resolved. As the variables are resolved in the order listed, when
processing:
delta=common_timestamp-$start
The $start is cleared. When it gets to "start2=$start", it errors out with
"unresolved symbol" (which is silent as this happens at the location of the
trace), and the histogram is dropped.
When processing the histogram for variable references, instead of adding a
new reference for a variable used twice, use the same reference. That way,
not only is it more efficient, but the order will no longer matter in
processing of the variables.
From Tom Zanussi:
"Just to clarify some more about what the problem was is that without
your patch, we would have two separate references to the same variable,
and during resolve_var_refs(), they'd both want to be resolved
separately, so in this case, since the first reference to start wasn't
part of an expression, it wouldn't get the read-once flag set, so would
be read normally, and then the second reference would do the read-once
read and also be read but using read-once. So everything worked and
you didn't see a problem:
from: start2=$start,delta=common_timestamp-$start
In the second case, when you switched them around, the first reference
would be resolved by doing the read-once, and following that the second
reference would try to resolve and see that the variable had already
been read, so failed as unset, which caused it to short-circuit out and
not do the trigger action to generate the synthetic event:
to: delta=common_timestamp-$start,start2=$start
With your patch, we only have the single resolution which happens
correctly the one time it's resolved, so this can't happen."
Link: https://lore.kernel.org/r/20200116154216.58ca08eb@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers") Reviewed-by: Tom Zanuss <zanussi@kernel.org> Tested-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Have create_var_ref() manage the hist trigger's var_ref list, rather
than having similar code doing it in multiple places. This cleans up
the code and makes sure var_refs are always accounted properly.
Also, document the var_ref-related functions to make what their
purpose clearer.
Since every var ref for a trigger has an entry in the var_ref[] array,
use that to destroy the var_refs, instead of piecemeal via the field
expressions.
This allows us to avoid having to keep and treat differently separate
lists for the action-related references, which future patches will
remove.
If FIFO Underrun, Byte Count Mismatch, Excessive Collision, or
Excessive Deferral (if enabled) errors occur, transmission ceases.
In this situation, the chip asserts a TXER interrupt rather than TXDN.
But the handler for the TXDN is the only way that the transmit queue
gets restarted. Hence, an aborted transmission can result in a watchdog
timeout.
This problem can be reproduced on congested link, as that can result in
excessive transmitter collisions. Another way to reproduce this is with
a FIFO Underrun, which may be caused by DMA latency.
In event of a TXER interrupt, prevent a watchdog timeout by restarting
transmission.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This bit [TXP] must not be set if a Load CAM operation is in
progress (LCAM is set). The SONIC will lock up if both bits are
set simultaneously.
Testing has shown that the driver sometimes attempts to set LCAM
while TXP is set. Avoid this by waiting for command completion
before and after giving the LCAM command.
After issuing the Load CAM command, poll for !SONIC_CR_LCAM rather than
SONIC_INT_LCD, because the SONIC_CR_TXP bit can't be used until
!SONIC_CR_LCAM.
When in reset mode, take the opportunity to reset the CAM Enable
register.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid this by giving the Stop Timer command earlier than later.
Secondly, the loop that waits for the Read RRA command to complete has
the break condition inverted. That's why the for loop iterates until
its termination condition. Call the helper for this instead.
Finally, give the Receiver Enable command after clearing interrupts,
not before, to avoid the possibility of losing an interrupt.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure the SONIC's DMA engine is idle before altering the transmit
and receive descriptors. Add a helper for this as it will be needed
again.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As soon as the driver is finished with a receive buffer it allocs a new
one and overwrites the corresponding RRA entry with a new buffer pointer.
Problem is, the buffer pointer is split across two word-sized registers.
It can't be updated in one atomic store. So this operation races with the
chip while it stores received packets and advances its RRP register.
This could result in memory corruption by a DMA write.
Avoid this problem by adding buffers only at the location given by the
RWP register, in accordance with the National Semiconductor datasheet.
Re-factor this code into separate functions to calculate a RRA pointer
and to update the RWP.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After sonic_tx_timeout() calls sonic_init(), it can happen that
sonic_rx() will subsequently encounter a receive descriptor with no
flags set. Remove the comment that says that this can't happen.
When giving a receive descriptor to the SONIC, clear the descriptor
status field. That way, any rx descriptor with flags set can only be
a newly received packet.
Don't process a descriptor without the LPKT bit set. The buffer is
still in use by the SONIC.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The while loop in sonic_rx() traverses the rx descriptor ring. It stops
when it reaches a descriptor that the SONIC has not used. Each iteration
advances the EOL flag so the SONIC can keep using more descriptors.
Therefore, the while loop has no definite termination condition.
The algorithm described in the National Semiconductor literature is quite
different. It consumes descriptors up to the one with its EOL flag set
(which will also have its "in use" flag set). All freed descriptors are
then returned to the ring at once, by adjusting the EOL flags (and link
pointers).
Adopt the algorithm from datasheet as it's simpler, terminates quickly
and avoids a lot of pointless descriptor EOL flag changes.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SONIC can sometimes advance its rx buffer pointer (RRP register)
without advancing its rx descriptor pointer (CRDA register). As a result
the index of the current rx descriptor may not equal that of the current
rx buffer. The driver mistakenly assumes that they are always equal.
This assumption leads to incorrect packet lengths and possible packet
duplication. Avoid this by calling a new function to locate the buffer
corresponding to a given descriptor.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tx_aborted_errors statistic should count packets flagged with EXD,
EXC, FU, or BCM bits because those bits denote an aborted transmission.
That corresponds to the bitmask 0x0446, not 0x0642. Use macros for these
constants to avoid mistakes. Better to leave out FIFO Underruns (FU) as
there's a separate counter for that purpose.
Don't lump all these errors in with the general tx_errors counter as
that's used for tx timeout events.
On the rx side, don't count RDE and RBAE interrupts as dropped packets.
These interrupts don't indicate a lost packet, just a lack of resources.
When a lack of resources results in a lost packet, this gets reported
in the rx_missed_errors counter (along with RFO events).
Don't double-count rx_frame_errors and rx_crc_errors.
Don't use the general rx_errors counter for events that already have
special counters.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver accesses descriptor memory which is simultaneously accessed by
the chip, so the compiler must not be allowed to re-order CPU accesses.
sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should
have done so too but was overlooked.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The chip can change a packet's descriptor status flags at any time.
However, an active interrupt flag gets cleared rather late. This
allows a race condition that could theoretically lose an interrupt.
Fix this by clearing asserted interrupt flags immediately.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The netif_stop_queue() call in sonic_send_packet() races with the
netif_wake_queue() call in sonic_interrupt(). This causes issues
like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out".
Fix this by disabling interrupts when accessing tx_skb[] and next_tx.
Update a comment to clarify the synchronization properties.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just as commit 0566e40ce7 ("tracing: initcall: Ordered comparison of
function pointers"), this patch fixes another remaining one in xen.h
found by clang-9.
In file included from arch/x86/xen/trace.c:21:
In file included from ./include/trace/events/xen.h:475:
In file included from ./include/trace/define_trace.h:102:
In file included from ./include/trace/trace_events.h:473:
./include/trace/events/xen.h:69:7: warning: ordered comparison of function \
pointers ('xen_mc_callback_fn_t' (aka 'void (*)(void *)') and 'xen_mc_callback_fn_t') [-Wordered-compare-function-pointers]
__field(xen_mc_callback_fn_t, fn)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/trace/trace_events.h:421:29: note: expanded from macro '__field'
^
./include/trace/trace_events.h:407:6: note: expanded from macro '__field_ext'
is_signed_type(type), filter_type); \
^
./include/linux/trace_events.h:554:44: note: expanded from macro 'is_signed_type'
^
Fixes: c796f213a6934 ("xen/trace: add multicall tracing") Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iscsit_close_connection() calls isert_wait_conn(). Due to commit e9d3009cb936 both functions call target_wait_for_sess_cmds() although that
last function should be called only once. Fix this by removing the
target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling
isert_wait_conn() after target_wait_for_sess_cmds().
Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session"). Link: https://lore.kernel.org/r/20200116044737.19507-1-bvanassche@acm.org Reported-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
in0 thresholds are written to the in2 thresholds registers
in2 thresholds to in3 thresholds
in3 thresholds to in4 thresholds
in4 thresholds to in0 thresholds
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could be used by a
malicious device (or USB descriptor fuzzer) to trigger a NULL-pointer
dereference.
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could lead to the
driver binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-3-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could lead to the
driver binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 162f98dea487 ("Input: gtco - fix crash on detecting device without endpoints") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-5-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting the vibrator enable_mask is not implemented correctly:
For regmap_update_bits(map, reg, mask, val) we give in either
regs->enable_mask or 0 (= no-op) as mask and "val" as value.
But "val" actually refers to the vibrator voltage control register,
which has nothing to do with the enable_mask.
So we usually end up doing nothing when we really wanted
to enable the vibrator.
We want to set or clear the enable_mask (to enable/disable the vibrator).
Therefore, change the call to always modify the enable_mask
and set the bits only if we want to enable the vibrator.
For SDHCIv3+ with programmable clock mode, minimal clock frequency is
still base clock / max(divider). Minimal programmable clock frequency is
always greater than minimal divided clock frequency. Without this patch,
SDHCI uses out-of-spec initial frequency when multiplier is big enough:
mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz
[for 480 MHz source clock divided by 1024]
The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode.
Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode") Cc: <stable@vger.kernel.org> # 4f6aa3264af4: mmc: tegra: Only advertise UHS modes if IO regulator is present Cc: <stable@vger.kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230()
...
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1
...
[<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8)
[<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90)
[<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c)
[<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230)
[<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444)
[<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8)
[<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358)
[<c0885a67>] (start_kernel) from [<00308095>] (0x308095)
---[ end trace cb88537fdc8fa200 ]---
ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60
actual: 44:f2:e1:36
ftrace record flags: 0
(0) expected tramp: c03143e9
Scenario 2, ARMv4T
==================
ftrace: allocating 14435 entries in 43 pages
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1
Hardware name: Cirrus Logic EDB9302 Evaluation Board
[<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c)
[<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30)
[<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104)
[<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c)
[<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310)
[<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4)
[<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410)
[<c04cef4c>] (start_kernel) from [<00000000>] ( (null))
---[ end trace 0506a2f5dae6b341 ]---
ftrace failed to modify
[<c000c350>] perf_trace_sys_exit+0x5c/0xe8
actual: 1e:ff:2f:e1
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c000fb24
The analysis for this problem has been already performed previously,
refer to the link below.
Fix the above problems by allowing only selected reloc types in
__mcount_loc. The list itself comes from the legacy recordmcount.pl
script.
Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/ Cc: stable@vger.kernel.org Fixes: ed60453fa8f8 ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
