If v4l2_ctrl_handler_setup() fails then probe() should return an error
code instead of returning success.
Fixes: cee1e3e2ef39 ("media: add video control handlers using V4L2 control framework") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKFkbATXa5fA3xj@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Wildcat Point has two SPI controllers and added one is actually second one.
Fix the numbering by adding the description of the first one.
Fixes: caba248db286 ("spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCH") Cc: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210208163816.22147-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
All of the GPLLs in the MSM8998 Global Clock Controller are Fabia PLLs
and not generic alphas: this was producing bad effects over the entire
clock tree of MSM8998, where any GPLL child clock was declaring a false
clock rate, due to their parent also showing the same.
The issue resides in the calculation of the clock rate for the specific
Alpha PLL type, where Fabia has a different register layout; switching
the MSM8998 GPLLs to the correct Alpha Fabia PLL type fixes the rate
(calculation) reading. While at it, also make these PLLs fixed since
their rate is supposed to *never* be changed while the system runs, as
this would surely crash the entire SoC.
Now all the children of all the PLLs are also complying with their
specified clock table and system stability is improved.
For unimplemented instructions or unimplemented SPRs, the 8xx triggers
a "Software Emulation Exception" (0x1000). That interrupt doesn't set
reason bits in SRR1 as the "Program Check Exception" does.
Go through emulation_assist_interrupt() to set REASON_ILLEGAL.
dlpar_configure_connector() has two problems in its handling of
ibm,configure-connector's return status:
1. When the status is -2 (busy, call again), we call
ibm,configure-connector again immediately without checking whether
to schedule, which can result in monopolizing the CPU.
2. Extended delay status (9900..9905) goes completely unhandled,
causing the configuration to unnecessarily terminate.
Fix both of these issues by using rtas_busy_delay().
The "req" struct is always added to the "wm831x->auxadc_pending" list,
but it's only removed from the list on the success path. If a failure
occurs then the "req" struct is freed but it's still on the list,
leading to a use after free.
Fixes: 78bb3688ea18 ("mfd: Support multiple active WM831x AUXADC conversions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
rxe_net.c sends packets at the IP layer with skb->data pointing at the IP
header but receives packets from a UDP tunnel with skb->data pointing at
the UDP header. On the loopback path this was not correctly accounted
for. This patch corrects for this by using sbk_pull() to strip the IP
header from the skb on received packets.
check_type_state() in rxe_recv.c is written as if the type bits in the
packet opcode were a bit mask which is not correct. This patch corrects
this code to compare all 3 type bits to the required type.
Fixes: 96415e4d3f5fdf9c ("perf symbols: Avoid unnecessary symbol loading when dso list is specified") Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210128131209.GD775562@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The list of tracepoint callbacks is managed by an array that is protected
by RCU. To update this array, a new array is allocated, the updates are
copied over to the new array, and then the list of functions for the
tracepoint is switched over to the new array. After a completion of an RCU
grace period, the old array is freed.
This process happens for both adding a callback as well as removing one.
But on removing a callback, if the new array fails to be allocated, the
callback is not removed, and may be used after it is freed by the clients
of the tracepoint.
There's really no reason to fail if the allocation for a new array fails
when removing a function. Instead, the function can simply be replaced by a
stub function that could be cleaned up on the next modification of the
array. That is, instead of calling the function registered to the
tracepoint, it would call a stub function in its place.
Consider an amba driver with a .probe but without a .remove callback (e.g.
pl061_gpio_driver). The function amba_probe() is called to bind a device
and so dev_pm_domain_attach() and others are called. As there is no remove
callback amba_remove() isn't called at unbind time however and so calling
dev_pm_domain_detach() is missed and the pm domain keeps active.
To fix this always use the core driver callbacks and handle missing amba
callbacks there. For probe refuse registration as a driver without probe
doesn't make sense.
Fixes: 7cfe249475fd ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210126165835.687514-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
It was observed that decompressor running on hardware implementing ARM v8.2
Load/Store Multiple Atomicity and Ordering Control (LSMAOC), say, as guest,
would stuck just after:
Uncompressing Linux... done, booting the kernel.
The reason is that it clears nTLSMD bit when disabling caches:
nTLSMD, bit [3]
When ARMv8.2-LSMAOC is implemented:
No Trap Load Multiple and Store Multiple to
Device-nGRE/Device-nGnRE/Device-nGnRnE memory.
0b0 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are trapped and
generate a stage 1 Alignment fault.
0b1 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are not trapped.
This bit is permitted to be cached in a TLB.
This field resets to 1.
Otherwise:
Reserved, RES1
So as effect we start getting traps we are not quite ready for.
Looking into history it seems that mask used for SCTLR clear came from
the similar code for ARMv4, where bit[3] is the enable/disable bit for
the write buffer. That not applicable to ARMv7 and onwards, so retire
that bit from the masks.
Fixes: 7d09e85448dfa78e3e58186c934449aaf6d49b50 ("[ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes]
1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes]
1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes]
1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes]
1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, polling a umad device will always works, even if the device was
disassociated. A disassociated device should immediately return EPOLLERR
from poll(). Otherwise userspace is endlessly hung on poll() with no idea
that the device has been removed from the system.
MAD message received by the user has EINVAL error in all flows
including when the device is disassociated. That makes it impossible
for the applications to treat such flow differently.
Change it to return EIO, so the applications will be able to perform
disassociation recovery.
The device node reference obtained with of_get_child_by_name() should be
dropped on error paths.
Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210121155914.48034-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
KEY_FLAG_KEEP is not meant to be passed to keyring_alloc() or key_alloc(),
as these only take KEY_ALLOC_* flags. KEY_FLAG_KEEP has the same value as
KEY_ALLOC_BYPASS_RESTRICTION, but fortunately only key_create_or_update()
uses it. LSMs using the key_alloc hook don't check that flag.
KEY_FLAG_KEEP is then ignored but fortunately (again) the root user cannot
write to the blacklist keyring, so it is not possible to remove a key/hash
from it.
Fix this by adding a KEY_ALLOC_SET_KEEP flag that tells key_alloc() to set
KEY_FLAG_KEEP on the new key. blacklist_init() can then, correctly, pass
this to keyring_alloc().
We can also use this in ima_mok_init() rather than setting the flag
manually.
Note that this doesn't fix an observable bug with the current
implementation but it is required to allow addition of new hashes to the
blacklist in the future without making it possible for them to be removed.
Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring") Reported-by: Mickaël Salaün <mic@linux.microsoft.com> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mickaël Salaün <mic@linux.microsoft.com>
cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Decrements the reference count of device node and its child node.
Fixes: dfe7a1b058bb ("regulator: AXP20x: Add support for regulators subsystem") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120123313.107640-1-bianpan2016@163.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
While comparing clocks between the H6 and H616, some of the M factor
ranges were found to be wrong: the manual says they are only covering
two bits [1:0], but our code had "5" in the number-of-bits field.
By writing 0xff into that register in U-Boot and via FEL, it could be
confirmed that bits [4:2] are indeed masked off, so the manual is right.
Change to number of bits in the affected clock's description.
Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210118000912.28116-1-andre.przywara@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If the device tree is incorrectly configured, and attempts to
define a "no-map" reserved memory that overlaps with the kernel
data/code, the kernel would crash quickly after boot, with no
obvious clue about the nature of the issue.
And we declare a no-map shared-dma-pool region at a fixed address
within that range:
mem_reserved: mem_region {
compatible = "shared-dma-pool";
reg = <0 0x40000000 0 0x01A00000>;
no-map;
};
To fix this, when removing memory regions at early boot (which is
what "no-map" regions do), we need to make sure that the memory
is not already reserved. If we do, __reserved_mem_reserve_reg
will throw an error:
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory
for node 'mem_region': base 0x0000000040000000, size 26 MiB
and the code that will try to use the region should also fail,
later on.
We do not do anything for non-"no-map" regions, as memblock
explicitly allows reserved regions to overlap, and the commit
that this fixes removed the check for that precise reason.
[ qperret: fixed conflicts caused by the usage of memblock_mark_nomap ]
Fixes: 094cb98179f19b7 ("of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20210115114544.1830068-3-qperret@google.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark the memory region with NOMAP flag instead of completely removing it
from the memory blocks. That makes the FDT handling consistent with the EFI
memory map handling.
Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20210115114544.1830068-2-qperret@google.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On Intel Tangier B0 and Anniedale the interrupt line, disregarding
to have different numbers, is shared between HSU DMA and UART IPs.
Thus on such SoCs we are expecting that IRQ handler is called in
UART driver only. hsu_pci_irq was handling the spurious interrupt
from HSU DMA by returning immediately. This wastes CPU time and
since HSU DMA and HSU UART interrupt occur simultaneously they race
to be handled causing delay to the HSU UART interrupt handling.
Fix this by disabling the interrupt entirely.
Prevent invalid (0, 0) inputs to hid-core's snto32() function.
Maybe it is just the dummy device here that is causing this, but
there are hundreds of calls to snto32(0, 0). Having n (bits count)
of 0 is causing the current UBSAN trap with a shift value of
0xffffffff (-1, or n - 1 in this function).
Either of the value to shift being 0 or the bits count being 0 can be
handled by just returning 0 to the caller, avoiding the following
complex shift + OR operations:
return value & (1 << (n - 1)) ? value | (~0U << n) : value;
The CEC clock on the H6 SoC is a bit special, since it uses a fixed
pre-dividier for one source clock (the PLL), but conveys the other clock
(32K OSC) directly.
We are using a fixed predivider array for that, but fail to use the right
flag to actually activate that.
Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Reported-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210106143246.11255-1-andre.przywara@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The controller can only support up to 31 dummy cycles. If the command
requires more it falls back to using 31. This command is likely to fail
because the correct number of cycles are not waited upon. Rather than
silently issuing an incorrect command, fail loudly so the caller can get
a chance to find out the command can't be supported by the controller.
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller") Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20201222184425.7028-3-p.yadav@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "rate" parameter in meson_clk_pll_set_rate() contains the new rate.
Retrieve the old rate with clk_hw_get_rate() so we don't inifinitely try
to switch from the new rate to the same rate again.
Fixes: 7a29a869434e8b ("clk: meson: Add support for Meson clock controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201226121556.975418-2-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The v3 file capabilities have a uid field that records the filesystem
uid of the root user of the user namespace the file capabilities are
valid in.
When someone is silly enough to have the same underlying uid as the
root uid of multiple nested containers a v3 filesystem capability can
be ambiguous.
In the spirit of don't do that then, forbid writing a v3 filesystem
capability if it is ambiguous.
Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities") Reviewed-by: Andrew G. Morgan <morgan@kernel.org> Reviewed-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fs/jffs2/summary.c:794:31: warning: Use of memory after it is freed
c->summary->sum_list_head = temp->u.next;
^~~~~~~~~~~~
In jffs2_sum_write_data(), in a loop summary data is handles a node at
a time. When it has written out the node it is removed the summary list,
and the node is deleted. In the corner case when a
JFFS2_FEATURE_RWCOMPAT_COPY is seen, a call is made to
jffs2_sum_disable_collecting(). jffs2_sum_disable_collecting() deletes
the whole list which conflicts with the loop's deleting the list by parts.
To preserve the old behavior of stopping the write midway, bail out of
the loop after disabling summary collection.
Fixes: 6171586a7ae5 ("[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then assigned to a signed 64 bit integer. In the case where
l2nb is 32 or more this can lead to an overflow. Avoid this by shifting
the value 1LL instead.
Addresses-Coverity: ("Uninitentional integer overflow") Fixes: b40c2e665cd5 ("fs/jfs: TRIM support for JFS Filesystem") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. This buffer is not freed before
completing the kexec system call resulting in memory leak.
Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. In error code paths this memory
is not freed resulting in memory leak.
Free the memory allocated for the IMA measurement list in
the error code paths in ima_add_kexec_buffer() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com> Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list") Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The length ('len' parameter) passed to crypto_ecdh_decode_key() is never
checked against the length encoded in the passed buffer ('buf'
parameter). This could lead to an out-of-bounds access when the passed
length is less than the encoded length.
Return value in __load_free_space_cache is not properly set after
(unlikely) memory allocation failures and 0 is returned instead.
This is not a problem for the caller load_free_space_cache because only
value 1 is considered as 'cache loaded' but for clarity it's better
to set the errors accordingly.
Fixes: a67509c30079 ("Btrfs: add a io_ctl struct and helpers for dealing with the space cache") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When channel->device_obj is non-NULL, vmbus_onoffer_rescind() could
invoke put_device(), that will eventually release the device and free
the channel object (cf. vmbus_device_release()). However, a pointer
to the object is dereferenced again later to load the primary_channel.
The use-after-free can be avoided by noticing that this load/check is
redundant if device_obj is non-NULL: primary_channel must be NULL if
device_obj is non-NULL, cf. vmbus_add_channel_work().
Fixes: 54a66265d6754b ("Drivers: hv: vmbus: Fix rescind handling") Reported-by: Juan Vazquez <juvazq@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20201209070827.29335-5-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the user passes a "level" value which is higher than 31 then that
leads to shift wrapping. The undefined behavior will lead to a
syzkaller stack dump.
Fixes: 5632708f4452 ("drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Occasionally, quota data may be corrupted detected by fsck:
Info: checkpoint state = 45 : crc compacted_summary unmount
[QUOTA WARNING] Usage inconsistent for ID 0:actual (1543036928, 762) != expected (1543032832, 762)
[ASSERT] (fsck_chk_quota_files:1986) --> Quota file is missing or invalid quota file content found.
[QUOTA WARNING] Usage inconsistent for ID 0:actual (1352478720, 344) != expected (1352474624, 344)
[ASSERT] (fsck_chk_quota_files:1986) --> Quota file is missing or invalid quota file content found.
[FSCK] Unreachable nat entries [Ok..] [0x0]
[FSCK] SIT valid block bitmap checking [Ok..]
[FSCK] Hard link checking for regular file [Ok..] [0x0]
[FSCK] valid_block_count matching with CP [Ok..] [0xdf299]
[FSCK] valid_node_count matcing with CP (de lookup) [Ok..] [0x2b01]
[FSCK] valid_node_count matcing with CP (nat lookup) [Ok..] [0x2b01]
[FSCK] valid_inode_count matched with CP [Ok..] [0x2665]
[FSCK] free segment_count matched with CP [Ok..] [0xcb04]
[FSCK] next block offset is free [Ok..]
[FSCK] fixing SIT types
[FSCK] other corrupted bugs [Fail]
The root cause is:
If we open file w/ readonly flag, disk quota info won't be initialized
for this file, however, following mmap() will force to convert inline
inode via f2fs_convert_inline_inode(), which may increase block usage
for this inode w/o updating quota data, it causes inconsistent disk quota
info.
The issue will happen in following stack:
open(file, O_RDONLY)
mmap(file)
- f2fs_convert_inline_inode
- f2fs_convert_inline_page
- f2fs_reserve_block
- f2fs_reserve_new_block
- f2fs_reserve_new_blocks
- f2fs_i_blocks_write
- dquot_claim_block
inode->i_blocks increase, but the dqb_curspace keep the size for the dquots
is NULL.
To fix this issue, let's call dquot_initialize() anyway in both
f2fs_truncate() and f2fs_convert_inline_inode() functions to avoid potential
inconsistent quota data issue.
Fixes: 0abd675e97e6 ("f2fs: support plain user/group quota") Signed-off-by: Daiyue Zhang <zhangdaiyue1@huawei.com> Signed-off-by: Dehe Gu <gudehe@huawei.com> Signed-off-by: Junchao Jiang <jiangjunchao1@huawei.com> Signed-off-by: Ge Qiu <qiuge@huawei.com> Signed-off-by: Yi Chen <chenyi77@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The correct mask is 0x1f8 (Bit 3-8), but due to missing BIT() 0xf (Bit
0-3) was set instead. This means setting of CPCAP_BIT_MIC1_RX_TIMESLOT0
(Bit 3) still worked (part of both masks). On the other hand the code
does not properly clear the other MIC timeslot bits. I think this
is not a problem, since they are probably initialized to 0 and not
touched by the driver anywhere else. But the mask also contains some
wrong bits, that will be cleared. Bit 0 (CPCAP_BIT_SMB_CDC) should be
safe, since the driver enforces it to be 0 anyways.
Bit 1-2 are CPCAP_BIT_FS_INV and CPCAP_BIT_CLK_INV. This means enabling
audio recording forces the codec into SND_SOC_DAIFMT_NB_NF mode, which
is obviously bad.
The bug probably remained undetected, because there are not many use
cases for routing microphone to the CPU on platforms using cpcap and
user base is small. I do remember having some issues with bad sound
quality when testing voice recording back when I wrote the driver.
It probably was this bug.
Fixes: f6cdf2d3445d ("ASoC: cpcap: new codec") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210123172945.3958622-1-sre@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.
Talitos Security Engine AESU considers any input
data size that is not a multiple of 16 bytes to be an error.
This is not a problem in general, except for Counter mode
that is a stream cipher and can have an input of any size.
Test Manager for ctr(aes) fails on 4th test vector which has
a length of 499 while all previous vectors which have a 16 bytes
multiple length succeed.
As suggested by Freescale, round up the input data length to the
nearest 16 bytes.
The Renkforce RF AC4K 300 Action Cam 4K reports invalid bFormatIndex and
bFrameIndex values when negotiating the video probe and commit controls.
The UVC descriptors report a single supported format and frame size,
with bFormatIndex and bFrameIndex both equal to 2, but the video probe
and commit controls report bFormatIndex and bFrameIndex set to 1.
The device otherwise operates correctly, but the driver rejects the
values and fails the format try operation. Fix it by ignoring the
invalid indices, and assuming that the format and frame requested by the
driver are accepted by the device.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210767 Fixes: 8a652a17e3c0 ("media: uvcvideo: Ensure all probed info is returned to v4l2") Reported-by: Till Dörges <doerges@pre-sense.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/media/platform/pxa_camera.c:1410:7: error:
‘i’ undeclared (first use in this function)
for (i = 0; i < vb->num_planes; i++)
^
The variable 'i' is missing, so declare it.
Fixes: 6f28435d1c15 ("[media] media: platform: pxa_camera: trivial move of functions") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
However, if 'risc->cpu != NULL', the memory will be freed, but never
reallocated with the bigger 'size'.
Explicitly set 'risc->cpu' to NULL, so that the reallocation is
correctly performed a few lines below.
In set_clamp(), the comments and definitions for the COLOR_DEPTH_101010
and COLOR_DEPTH_121212 cases directly contradict the code comment which
explains how this should work, whereas the COLOR_DEPTH_888 case
is consistent with the code comments. Comment says the bitmask should
be chosen to align to the top-most 10 or 12 MSB's on a 14 bit bus, but
the implementation contradicts that: 10 bit case sets a mask for 12 bpc
clamping, whereas 12 bit case sets a mask for 14 bpc clamping.
Note that during my limited testing on DCE-8.3 (HDMI deep color)
and DCE-11.2 (DP deep color), this didn't have any obvious ill
effects, neither did fixing it change anything obvious for the
better, so this fix may be inconsequential on DCE, and just
reduce the confusion of innocent bystanders when reading the code
and trying to investigate problems with 10 bpc+ output.
Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Renaming 'struct device_private' to 'struct bcm_device_private',
because it clashes with 'struct device_private' from
'drivers/base/base.h'.
While it's not a functional problem, it's causing two distinct
type hierarchies in BTF data. It also breaks build with options:
CONFIG_DEBUG_INFO_BTF=y
CONFIG_CRYPTO_DEV_BCM_SPU=y
There are two issues with this code. The first error path forgot to set
the error code and instead returns success. The second error path
doesn't clean up.
Fixes: 272b5edd3b8f ("ASoC: Add support for CS42L56 CODEC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X9NE/9nK9/TuxuL+@mwanda Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When kzalloc() fails, em28xx_uninit_usb_xfer() will free
usb_bufs->buf and set it to NULL. Thus the later access
to usb_bufs->buf[i] will lead to null pointer dereference.
Also the kfree(usb_bufs->buf) after that is redundant.
Fixes: d571b592c6206 ("media: em28xx: don't use coherent buffer for DMA transfers") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver currently reports a single supported value for
V4L2_CID_PIXEL_RATE and initializes the control's minimum value to 0,
which is very risky, as userspace might accidentally use it as divider
when calculating the time duration of a line.
Fix this by using as minimum the only supported value when registering
the control.
arch/mips/lantiq/irq.c:305:48: error: use of logical '&&' with constant
operand [-Werror,-Wconstant-logical-operand]
if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
^ ~~~~~~~~~~~~~~~~~
arch/mips/lantiq/irq.c:305:48: note: use '&' for a bitwise operation
if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
^~
&
arch/mips/lantiq/irq.c:305:48: note: remove constant to silence this
warning
if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
~^~~~~~~~~~~~~~~~~~~~
1 error generated.
Explicitly compare the constant LTQ_EBU_PCC_ISTAT against 0 to fix the
warning. Additionally, remove the unnecessary parentheses as this is a
simple conditional statement and shorthand '== 0' to '!'.
When building with clang, the following section mismatch warning occurs:
WARNING: modpost: vmlinux.o(.text+0x24490): Section mismatch in
reference from the function r4k_cache_init() to the function
.init.text:loongson2_sc_init()
This should have been fixed with commit ad4fddef5f23 ("mips: fix Section
mismatch in reference") but it was missed. Remove the improper __init
annotation like that commit did.
With the recent kmap change, some tests which were conditional on
CONFIG_DEBUG_HIGHMEM now are enabled by default.
This permit to detect a problem in sun4i-ss usage of kmap.
sun4i-ss uses two kmap via sg_miter (one for input, one for output), but
using two kmap at the same time is hard:
"the ordering has to be correct and with sg_miter that's probably hard to get
right." (quoting Tlgx)
So the easiest solution is to never have two sg_miter/kmap open at the same time.
After each use of sg_miter, I store the current index, for being able to
resume sg_miter to the right place.
The main problem with this error handling was that it didn't clean up if
i2c_add_numbered_adapter() failed. This code is pretty old, and doesn't
match with today's checkpatch.pl standards so I took the opportunity to
tidy it up a bit. I changed the NULL comparison, and removed the
WARNING message if kzalloc() fails and updated the label names.
It looks like SPARC64 requires FB_ATY_CT to build without errors,
so have FB_ATY select FB_ATY_CT if both SPARC64 and PCI are enabled
instead of using "default y if SPARC64 && PCI", which is not strong
enough to prevent build errors.
As it currently is, FB_ATY_CT can be disabled, resulting in build
errors:
According to Errata #23 "The per-CPU GbE interrupt is limited to Core
0", we can't use the per-cpu interrupt mechanism on the Armada 3700
familly.
This is correctly checked for RSS configuration, but the initial queue
mapping is still done by having the queues spread across all the CPUs in
the system, both in the init path and in the cpu_hotplug path.
Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Frequent link up/down events can happen when a Bel Fuse SFP part is
connected to the amd-xgbe device. Try to avoid the frequent link
issues by resetting the PHY as documented in Bel Fuse SFP datasheets.
Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Normally, auto negotiation and reconnect should be automatically done by
the hardware. But there seems to be an issue where auto negotiation has
to be restarted manually. This happens because of link training and so
even though still connected to the partner the link never "comes back".
This needs an auto-negotiation restart.
Also, a change in xgbe-mdio is needed to get ethtool to recognize the
link down and get the link change message. This change is only
required in a backplane connection mode.
Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sometimes mailbox commands timeout when the RX data path becomes
unresponsive. This prevents the submission of new mailbox commands to DXIO.
This patch identifies the timeout and resets the RX data path so that the
next message can be submitted properly.
Fixes: 549b32af9f7c ("amd-xgbe: Simplify mailbox interface rate change code") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Timeout reset will trigger the VIOS to unmap it automatically,
similarly as FAILVOER and MOBILITY events. If we unmap it
in the linux side, we will see errors like
"30000003: Error 4 in REQUEST_UNMAP_RSP".
So, don't call send_request_unmap for timeout reset.
Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
dma_rmb() barrier is added to load the long term buffer before copying
it to socket buffer; and dma_wmb() barrier is added to update the
long term buffer before it being accessed by VIOS (virtual i/o server).
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If PHY Revision >= 3
Copy table[i] to coef[i]
Otherwise
Set coef[i] to 0
the copy of the table to coef is currently implemented the wrong way
around, table is being updated from uninitialized values in coeff.
Fix this by swapping the assignment around.
Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration")
Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Max imm data size in cxgb4 is not similar to the max imm data size
in the chtls. This caused an mismatch in output of is_ofld_imm() of
cxgb4 and chtls. So fixed this by keeping the max wreq size of imm data
same in both chtls and cxgb4 as MAX_IMM_OFLD_TX_DATA_WR_LEN.
As cxgb4's max imm. data value for ofld packets is changed to
MAX_IMM_OFLD_TX_DATA_WR_LEN. Using the same in cxgbit also.
Fixes: 36bedb3f2e5b8 ("crypto: chtls - Inline TLS record Tx") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While commit 24adbc1676af ("tcp: fix SO_RCVLOWAT hangs with fat skbs")
fixed an issue vs too small sk_rcvbuf for given sk_rcvlowat constraint,
it missed to address issue caused by memory pressure.
1) If we are under memory pressure and socket receive queue is empty.
First incoming packet is allowed to be queued, after commit 76dfa6082032 ("tcp: allow one skb to be received per socket under memory pressure")
But we do not send EPOLLIN yet, in case tcp_data_ready() sees sk_rcvlowat
is bigger than skb length.
2) Then, when next packet comes, it is dropped, and we directly
call sk->sk_data_ready().
3) If application is using poll(), tcp_poll() will then use
tcp_stream_is_readable() and decide the socket receive queue is
not yet filled, so nothing will happen.
Even when sender retransmits packets, phases 2) & 3) repeat
and flow is effectively frozen, until memory pressure is off.
Fix is to consider tcp_under_memory_pressure() to take care
of global memory pressure or memcg pressure.
Fixes: 24adbc1676af ("tcp: fix SO_RCVLOWAT hangs with fat skbs") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Arjun Roy <arjunroy@google.com> Suggested-by: Wei Wang <weiwan@google.com> Reviewed-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
BPF end-user on Cilium slack-channel (Carlo Carraro) wants to use
bpf_fib_lookup for doing MTU-check, but *prior* to extending packet size,
by adjusting fib_params 'tot_len' with the packet length plus the expected
encap size. (Just like the bpf_check_mtu helper supports). He discovered
that for SKB ctx the param->tot_len was not used, instead skb->len was used
(via MTU check in is_skb_forwardable() that checks against netdev MTU).
Fix this by using fib_params 'tot_len' for MTU check. If not provided (e.g.
zero) then keep existing TC behaviour intact. Notice that 'tot_len' for MTU
check is done like XDP code-path, which checks against FIB-dst MTU.
V16:
- Revert V13 optimization, 2nd lookup is against egress/resulting netdev
V13:
- Only do ifindex lookup one time, calling dev_get_by_index_rcu().
V10:
- Use same method as XDP for 'tot_len' MTU check
Fixes: 4c79579b44b1 ("bpf: Change bpf_fib_lookup to return lookup status") Reported-by: Carlo Carraro <colrack@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/161287789444.790810.15247494756551413508.stgit@firesoul Signed-off-by: Sasha Levin <sashal@kernel.org>
The multiplication of the u32 variables tx_time and estimated_retx is
performed using a 32 bit multiplication and the result is stored in
a u64 result. This has a potential u32 overflow issue, so avoid this
by casting tx_time to a u64 to force a 64 bit multiply.
Addresses-Coverity: ("Unintentional integer overflow") Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of a common event for rx and tx queue the event should be
regarded to be spurious if no rx and no tx requests are pending.
Unfortunately the condition for testing that is wrong causing to
decide a event being spurious if no rx OR no tx requests are
pending.
Fix that plus using local variables for rx/tx pending indicators in
order to split function calls and if condition.
Fixes: 23025393dbeb3b ("xen/netback: use lateeoi irq binding") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
A TX queue can potentially immediately timeout after it is stopped
and the last TX timestamp on that queue was more than 5 seconds ago with
carrier still up. Prevent these intermittent false TX timeouts
by bringing down carrier first before calling netif_tx_disable().
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If set_link_state() fails for any reason, we still cleanup the adapter
state and cannot recover from a partial close anyway. So set the adapter
to CLOSED state. That way if a new soft/hard reset is processed, the
adapter will remain in the CLOSED state until the next ibmvnic_open().
Fixes: 01d9bd792d16 ("ibmvnic: Reorganize device close") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reported-by: Abdul Haleem <abdhalee@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
For double-checked locking in bpf_common_lru_push_free(), node->type is
read outside the critical section and then re-checked under the lock.
However, concurrent writes to node->type result in data races.
For example, the following concurrent access was observed by KCSAN:
write to 0xffff88801521bc22 of 1 bytes by task 10038 on cpu 1:
__bpf_lru_node_move_in kernel/bpf/bpf_lru_list.c:91
__local_list_flush kernel/bpf/bpf_lru_list.c:298
...
read to 0xffff88801521bc22 of 1 bytes by task 10043 on cpu 0:
bpf_common_lru_push_free kernel/bpf/bpf_lru_list.c:507
bpf_lru_push_free kernel/bpf/bpf_lru_list.c:555
...
Fix the data races where node->type is read outside the critical section
(for double-checked locking) by marking the access with READ_ONCE() as
well as ensuring the variable is only accessed once.
Fixes: 3a08c2fd7634 ("bpf: LRU List") Reported-by: syzbot+3536db46dfa58c573458@syzkaller.appspotmail.com Reported-by: syzbot+516acdb03d3e27d91bcd@syzkaller.appspotmail.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210209112701.3341724-1-elver@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC
SNOOP block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupt in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.
To prevent this issue, all LPC sub-nodes should enable LCLK
individually so this patch adds clock control logic into the LPC
SNOOP driver.
Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com> Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com> Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Building with the clang integrated assembler produces a couple of
errors for the s3c24xx fiq support:
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:52:2: error: instruction 'subne' can not set flags, but 's' suffix specified
subnes pc, lr, #4 @@ return, still have work to do
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:64:1: error: invalid symbol redefinition
s3c24xx_spi_fiq_txrx:
There are apparently two problems: one with extraneous or duplicate
labels, and one with old-style opcode mnemonics. Stefan Agner has
previously fixed other problems like this, but missed this particular
file.
projects / thirdparty / kernel / stable.git / log
