Kevin P. Fleming [Sat, 13 Jan 2007 16:45:37 +0000 (16:45 +0000)]
when building the sample greetings for maibox 1234@default during 'make samples', build a greeting for each language and file format the user selected to install with menuselect (reported by Brian Capouch on asterisk-dev)
Joshua Colp [Sat, 13 Jan 2007 06:00:24 +0000 (06:00 +0000)]
Only write a frame out to the channel if one exists. There are cases where one may not and would therefore cause the channel driver to segfault. (issue #8434 reported by slimey)
Joshua Colp [Thu, 11 Jan 2007 05:53:09 +0000 (05:53 +0000)]
Remove check for channel state as it can definitely be something other then ring, and also clean up the code a bit. This should solve the parking issues and maybe some attended transfer issues people have been seeing.
Joshua Colp [Thu, 11 Jan 2007 05:19:39 +0000 (05:19 +0000)]
Add support to see whether NAT was detected (yay symmetric RTP) and also add a check in chan_sip so that if NAT has been detected and the reinvite behind nat option has been turned off, then just do partial bridge. (issue #8655 reported by mnicholson)
Add another return value to dial_exec_full that indicates execution is going to continuing at a new extension/context/priority and to just let it slide. (issue #8598 reported by jon)
Russell Bryant [Wed, 10 Jan 2007 02:17:46 +0000 (02:17 +0000)]
Merged revisions 50227 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r50227 | russell | 2007-01-09 21:16:45 -0500 (Tue, 09 Jan 2007) | 6 lines
Make the number that represents the major version number a single digit instead
of 2. Using two digits makes it an octal number when put into version.h, which
breaks the compilation of any out of tree module that checks the version for
any version after 1.2.7 (reported by Matteo Brancaleoni on the asterisk-dev
mailing list, who gave credit to vihai for pointing it out)
The advent of realtime has enabled people to use commas in the fullname field.
This could cause an issue with sending voicemails, when the field is unquoted.
(Issue 8595)
Olle Johansson [Mon, 8 Jan 2007 14:26:14 +0000 (14:26 +0000)]
Issue #8677 - Handle failure of T.38 re-invite
This is not a fix, but adding an error message to tell the admin that
we have a bad configuration. We should not send T.38 re-invites to devices
that can't handle it (with the current architecture where you have to
hard-code t.38 support per device).
To really fix this, we need to figure out a way to tell the incoming
call that the re-invite failed, so we can signal failure on that
end and go back to the original call.
Jason Parker [Sat, 6 Jan 2007 00:24:38 +0000 (00:24 +0000)]
Save 1 whopping byte of allocated memory!
This looks like it may have been a chicken/egg scenario..
You had to call a cleanup func, because everything was allocated.
Then since you had to call a cleanup func, you were forced to allocate - ie; strdup("").
create the IAX2 processing threads as background threads so they will use smaller stacks
when we create a dynamic thread, put it on the dynamic_list right away so we don't lose track of it
Russell Bryant [Thu, 4 Jan 2007 04:33:00 +0000 (04:33 +0000)]
Fix the REALTIME() dialplan function. ast_build_string() advances the string
pointer to the position to begin the next write into the buffer. So, this
pointer can not be used to copy the contents of the string later. The
beginning of the buffer must be saved. Interestingly enough, this code could
not have ever worked. (Pointed out by Sebb on IRC, thanks!)
changed a few debugs to higher debug levels
........
r48321 | crichter | 2006-12-06 16:48:45 +0100 (Mi, 06 Dez 2006) | 1 line
added the export and import of the MISDN_ADDRESS_COMPLETE Variable to inidcate wether the extension is already completely dialed or if there might come additional digits by information elements. also added some docs for that.
........
r48467 | crichter | 2006-12-14 14:03:49 +0100 (Do, 14 Dez 2006) | 1 line
removed FIXUP state. added check for channel allocation conflict when we create a setup while the other site creates a setup on the same channel, besides the check we resolve this conflict.
........
r48552 | crichter | 2006-12-18 11:19:39 +0100 (Mo, 18 Dez 2006) | 1 line
when our PTP Partner sends us a SETUP with a preselected channel we just accept it, even when we're NT. added some checks for segfaults.
........
r48576 | crichter | 2006-12-19 14:08:51 +0100 (Di, 19 Dez 2006) | 1 line
when we reject a channel, because it's in use already, we shouldn't process the setup anymore. made the channel allocation a bit easier and more understandable, removed a few unused lines
........
r49135 | crichter | 2007-01-02 11:07:22 +0100 (Di, 02 Jan 2007) | 1 line
added check for channel ranges in the set/empty channel functions. set pmp_l1_check default to no. added misdn restart pid cli command. added cleaning of channel when we send a RELEASE_COMPLETE.
........
r49303 | crichter | 2007-01-03 09:24:00 +0100 (Mi, 03 Jan 2007) | 9 lines
* Added check for bridging in misdn_call to avoid setting echocancellation
when 2 mISDN channels are involved and when bridging is set. That lead
to a kernel panic before under different situations, because we switched
about 2 times between hardware bridging and echocancelation
* readded MISDN_URATE variable which got lost before, this should make app_v110
work again
* fixed typo
Joshua Colp [Wed, 3 Jan 2007 01:19:53 +0000 (01:19 +0000)]
Check pvt structure presence before passing to send_command. This gets rid of the irritating message about a packet without pvt structure. This happens because the scheduled item is getting cancelled at almost the exact moment it is getting executed.
Steve Murphy [Tue, 2 Jan 2007 22:30:53 +0000 (22:30 +0000)]
This is a slight modification to Josh's edits for #8579; both files edited were the produced by flex; so the source files need to be changed instead, and the generated files regenerated.
check specifically for VLDTMF and transcoding support in the system's Zaptel installation, and make only the modules that need those features dependent on them (this will allow building the other Zaptel-using parts of Asterisk against older versions of Zaptel or those on other platforms that haven't caught up yet to the Linux version)
revert this change until a better solution can be found... 'env -i' was not being used properly, but even when changed to do so, this process fails during cross-compilation because the menuselect build still sees 'CC' as set to the cross-compiler
Joshua Colp [Sat, 30 Dec 2006 18:19:57 +0000 (18:19 +0000)]
Use asprintf to build the channel names instead of custom function. I believe the custom function is doing some things that are not portable across all implementations. (issue #8570 reported by hterag & issue #8692 reported by nicolasg)
Joshua Colp [Sat, 30 Dec 2006 05:46:57 +0000 (05:46 +0000)]
If the Packet2Packet bridge is being broken because of a masquerade then attempt to read a frame in so the masquerade actually happens. Otherwise weirdness will occur. (issue #8696 reported by kjotte)
Joshua Colp [Wed, 27 Dec 2006 22:28:46 +0000 (22:28 +0000)]
ast_copy_string is not available when LOW_MEMORY is used and things are being built in the utils directory, so we need to resort to the old method of strncpy. (issue #8579 reported by mottano)
Kevin P. Fleming [Wed, 27 Dec 2006 21:08:30 +0000 (21:08 +0000)]
move extern declaration for this option to a header file where it belongs
provide an initial value for 'languageprefix' option, instead of relying on randomness to provide a useful value
Kevin P. Fleming [Wed, 27 Dec 2006 18:29:13 +0000 (18:29 +0000)]
allow 'show memory' and 'show memory summary' to distinguish memory allocations that were done for caching purposes, so they don't look like memory leaks
Olle Johansson [Wed, 27 Dec 2006 16:49:45 +0000 (16:49 +0000)]
Issue #8575 - Buggy cisco MWI support.
Normally we try not to change our software for bugs in other devices. But in
this case, the Cisco phones are so widespread so we try to implement a fix while
waiting for a bugfix from Cisco.
Olle Johansson [Wed, 27 Dec 2006 16:31:55 +0000 (16:31 +0000)]
- Make sure handle_common_options return 1 when we found a common option
- Move uncommon (only global) option away from handle_common_options
Reported by rizzo. Thanks!
Joshua Colp [Tue, 26 Dec 2006 05:20:08 +0000 (05:20 +0000)]
Get rid of a needless memory allocation and only create a conference structure in find_conf_realtime if data was read from realtime. (issue #8669 reported by robl)
Joshua Colp [Tue, 26 Dec 2006 04:31:58 +0000 (04:31 +0000)]
Add an API call that initializes an RTP structure. We need this because chan_sip is cheeky and uses a temporary RTP structure for codec purposes, and the API calls that are used rely on the lock. (Pointed out on asterisk-dev by Andy Wang)
Russell Bryant [Mon, 25 Dec 2006 05:21:20 +0000 (05:21 +0000)]
Merged revisions 48955 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r48955 | russell | 2006-12-25 00:19:48 -0500 (Mon, 25 Dec 2006) | 6 lines
Fix an error introduced by copying and pasting the handling of the >= operator
for the MATH function. If a single equal sign was used as an operator, the
function would treat it is as if it were the >= operator. Now, it properly
handles it as an invalid operator.
(issue #8665, patch by tempest1)
projects / thirdparty / asterisk.git / log
