Tested-by: Kiran K <kiran.k@intel.com> Fixes: f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the svc_i3c_master_probe function, &master->hj_work is bound with
svc_i3c_master_hj_work, &master->ibi_work is bound with
svc_i3c_master_ibi_work. And svc_i3c_master_ibi_work can start the
hj_work, svc_i3c_master_irq_handler can start the ibi_work.
If we remove the module which will call svc_i3c_master_remove to
make cleanup, it will free master->base through i3c_master_unregister
while the work mentioned above will be used. The sequence of operations
that may lead to a UAF bug is as follows:
DRM_MSM no longer needs DEVFREQ_GOV_SIMPLE_ONDEMAND (since commit dbd7a2a941b8 ("PM / devfreq: Fix build issues with devfreq disabled")
in linux-next), so remove that select from the DRM_MSM Kconfig file.
Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/523353/ Link: https://lore.kernel.org/r/20230220010428.16910-1-rdunlap@infradead.org
[rob: tweak commit message to make checkpatch.pl happy] Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing no-op shims for when PM_DEVFREQ (or an individual governor)
only do half the job. The governor specific config/tuning structs need
to be available to avoid compile errors in drivers using devfreq.
Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs") Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Patchwork: https://patchwork.freedesktop.org/patch/519801/ Link: https://lore.kernel.org/r/20230123153745.3185032-1-robdclark@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
svc_i3c_master_do_daa() {
...
for (i = 0; i < dev_nb; i++) {
ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
if (ret)
goto rpm_out;
}
}
If two devices (A and B) are detected in DAA and address 0xa is assigned to
device A and 0xb to device B, a failure in i3c_master_add_i3c_dev_locked()
for device A (addr: 0xa) could prevent device B (addr: 0xb) from being
registered on the bus. The I3C stack might still consider 0xb a free
address. If a subsequent Hotjoin occurs, 0xb might be assigned to Device A,
causing both devices A and B to use the same address 0xb, violating the I3C
specification.
The return value for i3c_master_add_i3c_dev_locked() should not be checked
because subsequent steps will scan the entire I3C bus, independent of
whether i3c_master_add_i3c_dev_locked() returns success.
If device A registration fails, there is still a chance to register device
B. i3c_master_add_i3c_dev_locked() can reset DAA if a failure occurs while
retrieving device information.
Cc: stable@kernel.org Fixes: 317bacf960a4 ("i3c: master: add enable(disable) hot join in sys entry") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20241002-svc-i3c-hj-v6-6-7e6e1d3569ae@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a new device hotjoins, a new dynamic address is assigned.
i3c_master_add_i3c_dev_locked() identifies that the device was previously
attached to the bus and locates the olddev.
i3c_master_add_i3c_dev_locked()
{
...
olddev = i3c_master_search_i3c_dev_duplicate(newdev);
...
if (olddev) {
...
i3c_dev_disable_ibi_locked(olddev);
^^^^^^
The olddev should not receive any commands on the i3c bus as it
does not exist and has been assigned a new address. This will
result in NACK or timeout. So remove it.
}
i3c_dev_free_ibi_locked(olddev);
^^^^^^^^
This function internally calls i3c_dev_disable_ibi_locked() function
causing to send DISEC command with old Address.
The olddev should not receive any commands on the i3c bus as it
does not exist and has been assigned a new address. This will
result in NACK or timeout. So, update the olddev->ibi->enabled
flag to false to avoid DISEC with OldAddr.
}
Include part of Ravindra Yashvant Shinde's work:
https://lore.kernel.org/linux-i3c/20240820151917.3904956-1-ravindra.yashvant.shinde@nxp.com/T/#u
Fixes: 317bacf960a4 ("i3c: master: add enable(disable) hot join in sys entry") Co-developed-by: Ravindra Yashvant Shinde <ravindra.yashvant.shinde@nxp.com> Signed-off-by: Ravindra Yashvant Shinde <ravindra.yashvant.shinde@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20241001162232.223724-1-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_DMA_ENGINE is disabled, the driver now fails to build:
drivers/tty/serial/amba-pl011.c: In function 'pl011_unthrottle_rx':
drivers/tty/serial/amba-pl011.c:1822:16: error: 'struct uart_amba_port' has no member named 'using_rx_dma'
1822 | if (uap->using_rx_dma) {
| ^~
drivers/tty/serial/amba-pl011.c:1823:20: error: 'struct uart_amba_port' has no member named 'dmacr'
1823 | uap->dmacr |= UART011_RXDMAE;
| ^~
drivers/tty/serial/amba-pl011.c:1824:32: error: 'struct uart_amba_port' has no member named 'dmacr'
1824 | pl011_write(uap->dmacr, uap, REG_DMACR);
| ^~
Add the missing #ifdef check around these field accesses, matching
what other parts of this driver do.
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an
endpoint is only assigned once. Unless the endpoint is reset, don't
clear this flag. Otherwise we may set endpoint resource again, which
prevents the driver from initiate transfer after handling a STALL or
endpoint halt to the control endpoint.
Split resume into a 3rd step to handle displays when DCC is
enabled on DCN 4.0.1. Move display after the buffer funcs
have been re-enabled so that the GPU will do the move and
properly set the DCC metadata for DCN.
v2: fix fence irq resume ordering
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some drivers require the mapped tt pages to be decrypted. In an ideal
world this would have been handled by the dma layer, but the TTM page
fault handling would have to be rewritten to able to do that.
A side-effect of the TTM page fault handling is using a dma allocation
per order (via ttm_pool_alloc_page) which makes it impossible to just
trivially use dma_mmap_attrs. As a result ttm has to be very careful
about trying to make its pgprot for the mapped tt pages match what
the dma layer thinks it is. At the ttm layer it's possible to
deduce the requirement to have tt pages decrypted by checking
whether coherent dma allocations have been requested and the system
is running with confidential computing technologies.
This approach isn't ideal but keeping TTM matching DMAs expectations
for the page properties is in general fragile, unfortunately proper
fix would require a rewrite of TTM's page fault handling.
Fixes vmwgfx with SEV enabled.
v2: Explicitly include cc_platform.h
v3: Use CC_ATTR_GUEST_MEM_ENCRYPT instead of CC_ATTR_MEM_ENCRYPT to
limit the scope to guests and log when memory decryption is enabled.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Fixes: 3bf3710e3718 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem") Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/20230926040359.3040017-1-zack@kde.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ye Li <ye.li@broadcom.com> Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently veth devices use the lstats per-CPU traffic counters, which only
cover TX traffic. veth_get_stats64() actually populates RX stats of a veth
device from its peer's TX counters, based on the assumption that a veth
device can _only_ receive packets from its peer, which is no longer true:
For example, recent CNIs (like Cilium) can use the bpf_redirect_peer() BPF
helper to redirect traffic from NIC's tc ingress to veth's tc ingress (in
a different netns), skipping veth's peer device. Unfortunately, this kind
of traffic isn't currently accounted for in veth's RX stats.
In preparation for the fix, use tstats (instead of lstats) to maintain
both RX and TX counters for each veth device. We'll use RX counters for
bpf_redirect_peer() traffic, and keep using TX counters for the usual
"peer-to-peer" traffic. In veth_get_stats64(), calculate RX stats by
_adding_ RX count to peer's TX count, in order to cover both kinds of
traffic.
veth_stats_rx() might need a name change (perhaps to "veth_stats_xdp()")
for less confusion, but let's leave it to another patch to keep the fix
minimal.
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20231114004220.6495-5-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Traffic redirected by bpf_redirect_peer() (used by recent CNIs like Cilium)
is not accounted for in the RX stats of supported devices (that is, veth
and netkit), confusing user space metrics collectors such as cAdvisor [0],
as reported by Youlun.
Fix it by calling dev_sw_netstats_rx_add() in skb_do_redirect(), to update
RX traffic counters. Devices that support ndo_get_peer_dev _must_ use the
@tstats per-CPU counters (instead of @lstats, or @dstats).
To make this more fool-proof, error out when ndo_get_peer_dev is set but
@tstats are not selected.
[0] Specifically, the "container_network_receive_{byte,packet}s_total"
counters are affected.
Fixes: 9aa1206e8f48 ("bpf: Add redirect_peer helper") Reported-by: Youlun Zhang <zhangyoulun@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20231114004220.6495-6-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move {l,t,d}stats allocation to the core and let netdevs pick the stats
type they need. That way the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc) - all happening in the core.
Co-developed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Cc: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20231114004220.6495-3-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 024ee930cb3c ("bpf: Fix dev's rx stats for bpf_redirect_peer traffic")
[ Note: Simplified vrf bits to reduce patch given unrelated to the fix ] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lonial found an issue that despite user- and BPF-side frozen BPF map
(like in case of .rodata), it was still possible to write into it from
a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT}
as arguments.
In check_func_arg() when the argument is as mentioned, the meta->raw_mode
is never set. Later, check_helper_mem_access(), under the case of
PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the
subsequent call to check_map_access_type() and given the BPF map is
read-only it succeeds.
The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT
when results are written into them as opposed to read out of them. The
latter indicates that it's okay to pass a pointer to uninitialized memory
as the memory is written to anyway.
However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM
just with additional alignment requirement. So it is better to just get
rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the
fixed size memory types. For this, add MEM_ALIGNED to additionally ensure
alignment given these helpers write directly into the args via *<ptr> = val.
The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>).
MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated
argument types, since in !MEM_FIXED_SIZE cases the verifier does not know
the buffer size a priori and therefore cannot blindly write *<ptr> = val.
Fixes: 57c3bb725a3d ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types") Reported-by: Lonial Con <kongln9170@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Link: https://lore.kernel.org/r/20240913191754.13290-3-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ Resolve merge conflict in include/linux/bpf.h and merge conflict in
kernel/bpf/verifier.c.] Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The remap_file_pages syscall handler calls do_mmap() directly, which
doesn't contain the LSM security check. And if the process has called
personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for
RW pages, this will actually result in remapping the pages to RWX,
bypassing a W^X policy enforced by SELinux.
So we should check prot by security_mmap_file LSM hook in the
remap_file_pages syscall handler before do_mmap() is called. Otherwise, it
potentially permits an attacker to bypass a W^X policy enforced by
SELinux.
The bypass is similar to CVE-2016-10044, which bypass the same thing via
AIO and can be found in [1].
The PoC:
$ cat > test.c
int main(void) {
size_t pagesz = sysconf(_SC_PAGE_SIZE);
int mfd = syscall(SYS_memfd_create, "test", 0);
const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE,
MAP_SHARED, mfd, 0);
unsigned int old = syscall(SYS_personality, 0xffffffff);
syscall(SYS_personality, READ_IMPLIES_EXEC | old);
syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0);
syscall(SYS_personality, old);
// show the RWX page exists even if W^X policy is enforced
int fd = open("/proc/self/maps", O_RDONLY);
unsigned char buf2[1024];
while (1) {
int ret = read(fd, buf2, 1024);
if (ret <= 0) break;
write(1, buf2, ret);
}
close(fd);
}
Link: https://project-zero.issues.chromium.org/issues/42452389 Cc: stable@vger.kernel.org Signed-off-by: Shu Han <ebpqwerty472123@gmail.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject line tweaks] Signed-off-by: Paul Moore <paul@paul-moore.com>
[ Resolve merge conflict in mm/mmap.c. ] Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for return code from avs_pcm_hw_constraints_init() in
avs_dai_fe_startup() only checks if value is different from 0. Currently
function can return positive value, change it to return 0 on success.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
I've observed KASAN on our setups and while patch itself is correct
regardless. Problem seems to be caused by recent changes to rates, as
this started happening after recent patchsets and doesn't reproduce with
those reverted
https://lore.kernel.org/linux-sound/20240905-alsa-12-24-128-v1-0-8371948d3921@baylibre.com/
https://lore.kernel.org/linux-sound/20240911135756.24434-1-tiwai@suse.de/
I've tested using Mark tree, where they are both applied and for some
reason snd_pcm_hw_constraint_minmax() started returning positive value,
while previously it returned 0. I'm bit worried if it signals some
potential deeper problem regarding constraints with above changes.
SMCCCv1.3 added a hint bit which callers can set in an SMCCC function ID
(AKA "FID") to indicate that it is acceptable for the SMCCC
implementation to discard SVE and/or SME state over a specific SMCCC
call. The kernel support for using this hint is broken and SMCCC calls
may clobber the SVE and/or SME state of arbitrary tasks, though FPSIMD
state is unaffected.
The kernel support is intended to use the hint when there is no SVE or
SME state to save, and to do this it checks whether TIF_FOREIGN_FPSTATE
is set or TIF_SVE is clear in assembly code:
| ldr <flags>, [<current_task>, #TSK_TI_FLAGS]
| tbnz <flags>, #TIF_FOREIGN_FPSTATE, 1f // Any live FP state?
| tbnz <flags>, #TIF_SVE, 2f // Does that state include SVE?
|
| 1: orr <fid>, <fid>, ARM_SMCCC_1_3_SVE_HINT
| 2:
| << SMCCC call using FID >>
This is not safe as-is:
(1) SMCCC calls can be made in a preemptible context and preemption can
result in TIF_FOREIGN_FPSTATE being set or cleared at arbitrary
points in time. Thus checking for TIF_FOREIGN_FPSTATE provides no
guarantee.
(2) TIF_FOREIGN_FPSTATE only indicates that the live FP/SVE/SME state in
the CPU does not belong to the current task, and does not indicate
that clobbering this state is acceptable.
When the live CPU state is clobbered it is necessary to update
fpsimd_last_state.st to ensure that a subsequent context switch will
reload FP/SVE/SME state from memory rather than consuming the
clobbered state. This and the SMCCC call itself must happen in a
critical section with preemption disabled to avoid races.
(3) Live SVE/SME state can exist with TIF_SVE clear (e.g. with only
TIF_SME set), and checking TIF_SVE alone is insufficient.
Remove the broken support for the SMCCCv1.3 SVE saving hint. This is
effectively a revert of commits:
* cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
* a7c3acca5380 ("arm64: smccc: Save lr before calling __arm_smccc_sve_check()")
... leaving behind the ARM_SMCCC_VERSION_1_3 and ARM_SMCCC_1_3_SVE_HINT
definitions, since these are simply definitions from the SMCCC
specification, and the latter is used in KVM via ARM_SMCCC_CALL_HINTS.
If we want to bring this back in future, we'll probably want to handle
this logic in C where we can use all the usual FPSIMD/SVE/SME helper
functions, and that'll likely require some rework of the SMCCC code
and/or its callers.
Fixes: cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241106160448.2712997-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflicts in <linux/arm-smccc.h> ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The logic for handling SVE traps manipulates saved FPSIMD/SVE state
incorrectly, and a race with preemption can result in a task having
TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SVE traps enabled). This has been observed to result
in warnings from do_sve_acc() where SVE traps are not expected while
TIF_SVE is set:
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
Warnings of this form have been reported intermittently, e.g.
The race can occur when the SVE trap handler is preempted before and
after manipulating the saved FPSIMD/SVE state, starting and ending on
the same CPU, e.g.
| void do_sve_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
|
| sve_init_regs() {
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| ...
| } else {
| fpsimd_to_sve(current);
| current->thread.fp_type = FP_STATE_SVE;
| }
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SVE traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Fixes: cccb78ce89c4 ("arm64/sve: Rework SVE access trap to convert state in registers") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20241030-arm64-fpsimd-foreign-flush-v1-1-bd7bd66905a2@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Netpoll will explicilty pass the polling call with a budget of 0 to
indicate it's clearing the Tx path only. For the gve_rx_poll and
gve_xdp_poll, they were mistakenly taking the 0 budget as the indication
to do all the work. Add check to avoid the rx path and xdp path being
called when budget is 0. And also avoid napi_complete_done being called
when budget is 0 for netpoll.
The origin mainline patch fix a buffer overflow issue in
amdgpu_debugfs_gprwave_read(), but it has not been introduced in kernel
6.1 and older kernels. This patch add a check in a wrong function in the
same file.
Heming Zhao [Thu, 12 Dec 2024 11:31:05 +0000 (19:31 +0800)]
ocfs2: Revert "ocfs2: fix the la space leak when unmounting an ocfs2 volume"
This reverts commit dfe6c5692fb5 ("ocfs2: fix the la space leak when
unmounting an ocfs2 volume").
In commit dfe6c5692fb5, the commit log "This bug has existed since the
initial OCFS2 code." is wrong. The correct introduction commit is 30dd3478c3cd ("ocfs2: correctly use ocfs2_find_next_zero_bit()").
The influence of commit dfe6c5692fb5 is that it provides a correct
fix for the latest kernel. however, it shouldn't be pushed to stable
branches. Let's use this commit to revert all branches that include dfe6c5692fb5 and use a new fix method to fix commit 30dd3478c3cd.
Fixes: dfe6c5692fb5 ("ocfs2: fix the la space leak when unmounting an ocfs2 volume") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BIOS images may fail to load and null checks are added before they are
used.
This fixes 6 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the probe function, it goes to 'release_mem' label and returns after
some procedure failure. But if the clocks (partial or all) have been
enabled previously, they would not be disabled in msdc_runtime_suspend,
since runtime PM is not yet enabled for this case.
That cause mmc related clocks always on during system suspend and block
suspend flow. Below log is from a SDCard issue of MT8196 chromebook, it
returns -ETIMEOUT while polling clock stable in the msdc_ungate_clock()
and probe failed, but the enabled clocks could not be disabled anyway.
Don't flush all pending DbC data requests when an endpoint halts.
An endpoint may halt and xHC DbC triggers a STALL error event if there's
an issue with a bulk data transfer. The transfer should restart once xHC
DbC receives a ClearFeature(ENDPOINT_HALT) request from the host.
Once xHC DbC restarts it will start from the TRB pointed to by dequeue
field in the endpoint context, which might be the same TRB we got the
STALL event for. Turn the TRB to a no-op in this case to make sure xHC
DbC doesn't reuse and tries to retransmit this same TRB after we already
handled it, and gave its corresponding data request back.
Other STALL events might be completely bogus.
Lukasz Bartosik discovered that xHC DbC might issue spurious STALL events
if hosts sends a ClearFeature(ENDPOINT_HALT) request to non-halted
endpoints even without any active bulk transfers.
Assume STALL event is spurious if it reports 0 bytes transferred, and
the endpoint stopped on the STALLED TRB.
Don't give back the data request corresponding to the TRB in this case.
The halted status is per endpoint. Track it with a per endpoint flag
instead of the driver invented DbC wide DS_STALLED state.
DbC remains in DbC-Configured state even if endpoints halt. There is no
Stalled state in the DbC Port state Machine (xhci section 7.6.6)
Flush completions is done either from the submit syscall or by the
task_work, both are in the context of the submitter task, and when it
goes for a single threaded rings like implied by ->task_complete, there
won't be any waiters on ->cq_wait but the master task. That means that
there can be no tasks sleeping on cq_wait while we run
__io_submit_flush_completions() and so waking up can be skipped.
Patch series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()". v2.
According to the logic of damon_va_evenly_split_region(), currently
following split case would not meet the expectation:
Suppose DAMON_MIN_REGION=0x1000,
Case: Split [0x0, 0x3000) into 2 pieces, then the result would be
acutually 3 regions:
[0x0, 0x1000), [0x1000, 0x2000), [0x2000, 0x3000)
but NOT the expected 2 regions:
[0x0, 0x1000), [0x1000, 0x3000) !!!
The root cause is that when calculating size of each split piece in
damon_va_evenly_split_region():
both the dividing and the ALIGN_DOWN may cause loss of precision, then
each time split one piece of size 'sz_piece' from origin 'start' to 'end'
would cause more pieces are split out than expected!!!
To fix it, count for each piece split and make sure no more than
'nr_pieces'. In addition, add above case into damon_test_split_evenly().
And add 'nr_piece == 1' check in damon_va_evenly_split_region() for better
code readability and add a corresponding kunit testcase.
This patch (of 2):
According to the logic of damon_va_evenly_split_region(), currently
following split case would not meet the expectation:
Suppose DAMON_MIN_REGION=0x1000,
Case: Split [0x0, 0x3000) into 2 pieces, then the result would be
acutually 3 regions:
[0x0, 0x1000), [0x1000, 0x2000), [0x2000, 0x3000)
but NOT the expected 2 regions:
[0x0, 0x1000), [0x1000, 0x3000) !!!
The root cause is that when calculating size of each split piece in
damon_va_evenly_split_region():
both the dividing and the ALIGN_DOWN may cause loss of precision,
then each time split one piece of size 'sz_piece' from origin 'start' to
'end' would cause more pieces are split out than expected!!!
To fix it, count for each piece split and make sure no more than
'nr_pieces'. In addition, add above case into damon_test_split_evenly().
The rtime decompression routine does not fully check bounds during the
entirety of the decompression pass and can corrupt memory outside the
decompression buffer if the compressed data is corrupted. This adds the
required check to prevent this failure mode.
Cc: stable@vger.kernel.org Signed-off-by: Kinsey Moore <kinsey.moore@oarcorp.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Kuratov [Sun, 8 Dec 2024 08:37:43 +0000 (11:37 +0300)]
KVM: x86/mmu: Ensure that kvm_release_pfn_clean() takes exact pfn from kvm_faultin_pfn()
Since 5.16 and prior to 6.13 KVM can't be used with FSDAX
guest memory (PMD pages). To reproduce the issue you need to reserve
guest memory with `memmap=` cmdline, create and mount FS in DAX mode
(tested both XFS and ext4), see doc link below. ndctl command for test:
ndctl create-namespace -v -e namespace1.0 --map=dev --mode=fsdax -a 2M
Then pass memory object to qemu like:
-m 8G -object memory-backend-file,id=ram0,size=8G,\
mem-path=/mnt/pmem/guestmem,share=on,prealloc=on,dump=off,align=2097152 \
-numa node,memdev=ram0,cpus=0-1
QEMU fails to run guest with error: kvm run failed Bad address
and there are two warnings in dmesg:
WARN_ON_ONCE(!page_count(page)) in kvm_is_zone_device_page() and
WARN_ON_ONCE(folio_ref_count(folio) <= 0) in try_grab_folio() (v6.6.63)
It looks like in the past assumption was made that pfn won't change from
faultin_pfn() to release_pfn_clean(), e.g. see
commit 4cd071d13c5c ("KVM: x86/mmu: Move calls to thp_adjust() down a level")
But kvm_page_fault structure made pfn part of mutable state, so
now release_pfn_clean() can take hugepage-adjusted pfn.
And it works for all cases (/dev/shm, hugetlb, devdax) except fsdax.
Apparently in fsdax mode faultin-pfn and adjusted-pfn may refer to
different folios, so we're getting get_page/put_page imbalance.
To solve this preserve faultin pfn in separate local variable
and pass it in kvm_release_pfn_clean().
Patch tested for all mentioned guest memory backends with tdp_mmu={0,1}.
No bug in upstream as it was solved fundamentally by
commit 8dd861cc07e2 ("KVM: x86/mmu: Put refcounted pages instead of blindly releasing pfns")
and related patch series.
Link: https://nvdimm.docs.kernel.org/2mib_fs_dax.html Fixes: 2f6305dd5676 ("KVM: MMU: change kvm_tdp_mmu_map() arguments to kvm_page_fault") Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When DISCARD frees an ITE, it does not invalidate the
corresponding ITE. In the scenario of continuous saves and
restores, there may be a situation where an ITE is not saved
but is restored. This is unreasonable and may cause restore
to fail. This patch clears the corresponding ITE when DISCARD
frees an ITE.
Cc: stable@vger.kernel.org Fixes: eff484e0298d ("KVM: arm64: vgic-its: ITT save and restore") Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
[Jing: Update with entry write helper] Signed-off-by: Jing Zhang <jingzhangos@google.com> Link: https://lore.kernel.org/r/20241107214137.428439-6-jingzhangos@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vgic_its_save_device_tables will traverse its->device_list to
save DTE for each device. vgic_its_restore_device_tables will
traverse each entry of device table and check if it is valid.
Restore if valid.
But when MAPD unmaps a device, it does not invalidate the
corresponding DTE. In the scenario of continuous saves
and restores, there may be a situation where a device's DTE
is not saved but is restored. This is unreasonable and may
cause restore to fail. This patch clears the corresponding
DTE when MAPD unmaps a device.
In all the vgic_its_save_*() functinos, they do not check whether
the data length is 8 bytes before calling vgic_write_guest_lock.
This patch adds the check. To prevent the kernel from being blown up
when the fault occurs, KVM_BUG_ON() is used. And the other BUG_ON()s
are replaced together.
Cc: stable@vger.kernel.org Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
[Jing: Update with the new entry read/write helpers] Signed-off-by: Jing Zhang <jingzhangos@google.com> Link: https://lore.kernel.org/r/20241107214137.428439-4-jingzhangos@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
udf_getblk() has a single call site. Fold it there.
Signed-off-by: Jan Kara <jack@suse.cz>
[acsjakub: backport-adjusting changes
udf_getblk() has changed between 6.1 and the backported commit, namely
in commit 541e047b14c8 ("udf: Use udf_map_block() in udf_getblk()")
Backport using the form of udf_getblk present in 6.1., that means use
udf_get_block() instead of udf_map_block() and use dummy in buffer_new()
and buffer_mapped(). ] Closes: https://syzkaller.appspot.com/bug?extid=a38e34ca637c224f4a79 Signed-off-by: Jakub Acs <acsjakub@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Align the page tracking maximum message size with the device's
capability instead of relying on PAGE_SIZE.
This adjustment resolves a mismatch on systems where PAGE_SIZE is 64K,
but the firmware only supports a maximum message size of 4K.
Now that we rely on the device's capability for max_message_size, we
must account for potential future increases in its value.
Key considerations include:
- Supporting message sizes that exceed a single system page (e.g., an 8K
message on a 4K system).
- Ensuring the RQ size is adjusted to accommodate at least 4
WQEs/messages, in line with the device specification.
The above has been addressed as part of the patch.
Fixes: 79c3cf279926 ("vfio/mlx5: Init QP based resources for dirty tracking") Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Yingshun Cui <yicui@redhat.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20241205122654.235619-1-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It turns out that we can't do this, because while the old behavior of
ignoring ignorable code points was most definitely wrong, we have
case-folding filesystems with on-disk hash values with that wrong
behavior.
So now you can't look up those names, because they hash to something
different.
Of course, it's also entirely possible that in the meantime people have
created *new* files with the new ("more correct") case folding logic,
and reverting will just make other things break.
The correct solution is to not do case folding in filesystems, but
sadly, people seem to never really understand that. People still see it
as a feature, not a bug.
Reported-by: Qi Han <hanqi@vivo.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219586 Cc: Gabriel Krisman Bertazi <krisman@suse.de> Requested-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When activating a swap file we acquire the root's snapshot drew lock and
then check if the root is dead, failing and returning with -EPERM if it's
dead but without unlocking the root's snapshot lock. Fix this by adding
the missing unlock.
Fixes: 60021bd754c6 ("btrfs: prevent subvol with swapfile from being deleted") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Scheduler raises a SCHED_SOFTIRQ to trigger a load balancing event on
from the IPI handler on the idle CPU. If the SMP function is invoked
from an idle CPU via flush_smp_call_function_queue() then the HARD-IRQ
flag is not set and raise_softirq_irqoff() needlessly wakes ksoftirqd
because soft interrupts are handled before ksoftirqd get on the CPU.
Adding a trace_printk() in nohz_csd_func() at the spot of raising
SCHED_SOFTIRQ and enabling trace events for sched_switch, sched_wakeup,
and softirq_entry (for SCHED_SOFTIRQ vector alone) helps observing the
current behavior:
Use __raise_softirq_irqoff() to raise the softirq. The SMP function call
is always invoked on the requested CPU in an interrupt handler. It is
guaranteed that soft interrupts are handled at the end.
Following are the observations with the changes when enabling the same
set of events:
Commit b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
optimizes IPIs to idle CPUs in TIF_POLLING_NRFLAG mode by setting the
TIF_NEED_RESCHED flag in idle task's thread info and relying on
flush_smp_call_function_queue() in idle exit path to run the
call-function. A softirq raised by the call-function is handled shortly
after in do_softirq_post_smp_call_flush() but the TIF_NEED_RESCHED flag
remains set and is only cleared later when schedule_idle() calls
__schedule().
need_resched() check in _nohz_idle_balance() exists to bail out of load
balancing if another task has woken up on the CPU currently in-charge of
idle load balancing which is being processed in SCHED_SOFTIRQ context.
Since the optimization mentioned above overloads the interpretation of
TIF_NEED_RESCHED, check for idle_cpu() before going with the existing
need_resched() check which can catch a genuine task wakeup on an idle
CPU processing SCHED_SOFTIRQ from do_softirq_post_smp_call_flush(), as
well as the case where ksoftirqd needs to be preempted as a result of
new task wakeup or slice expiry.
In case of PREEMPT_RT or threadirqs, although the idle load balancing
may be inhibited in some cases on the ilb CPU, the fact that ksoftirqd
is the only fair task going back to sleep will trigger a newidle balance
on the CPU which will alleviate some imbalance if it exists if idle
balance fails to do so.
The need_resched() check currently in nohz_csd_func() can be tracked
to have been added in scheduler_ipi() back in 2011 via commit ca38062e57e9 ("sched: Use resched IPI to kick off the nohz idle balance")
Since then, it has travelled quite a bit but it seems like an idle_cpu()
check currently is sufficient to detect the need to bail out from an
idle load balancing. To justify this removal, consider all the following
case where an idle load balancing could race with a task wakeup:
o Since commit f3dd3f674555b ("sched: Remove the limitation of WF_ON_CPU
on wakelist if wakee cpu is idle") a target perceived to be idle
(target_rq->nr_running == 0) will return true for
ttwu_queue_cond(target) which will offload the task wakeup to the idle
target via an IPI.
In all such cases target_rq->ttwu_pending will be set to 1 before
queuing the wake function.
If an idle load balance races here, following scenarios are possible:
- The CPU is not in TIF_POLLING_NRFLAG mode in which case an actual
IPI is sent to the CPU to wake it out of idle. If the
nohz_csd_func() queues before sched_ttwu_pending(), the idle load
balance will bail out since idle_cpu(target) returns 0 since
target_rq->ttwu_pending is 1. If the nohz_csd_func() is queued after
sched_ttwu_pending() it should see rq->nr_running to be non-zero and
bail out of idle load balancing.
- The CPU is in TIF_POLLING_NRFLAG mode and instead of an actual IPI,
the sender will simply set TIF_NEED_RESCHED for the target to put it
out of idle and flush_smp_call_function_queue() in do_idle() will
execute the call function. Depending on the ordering of the queuing
of nohz_csd_func() and sched_ttwu_pending(), the idle_cpu() check in
nohz_csd_func() should either see target_rq->ttwu_pending = 1 or
target_rq->nr_running to be non-zero if there is a genuine task
wakeup racing with the idle load balance kick.
o The waker CPU perceives the target CPU to be busy
(targer_rq->nr_running != 0) but the CPU is in fact going idle and due
to a series of unfortunate events, the system reaches a case where the
waker CPU decides to perform the wakeup by itself in ttwu_queue() on
the target CPU but target is concurrently selected for idle load
balance (XXX: Can this happen? I'm not sure, but we'll consider the
mother of all coincidences to estimate the worst case scenario).
ttwu_do_activate() calls enqueue_task() which would increment
"rq->nr_running" post which it calls wakeup_preempt() which is
responsible for setting TIF_NEED_RESCHED (via a resched IPI or by
setting TIF_NEED_RESCHED on a TIF_POLLING_NRFLAG idle CPU) The key
thing to note in this case is that rq->nr_running is already non-zero
in case of a wakeup before TIF_NEED_RESCHED is set which would
lead to idle_cpu() check returning false.
In all cases, it seems that need_resched() check is unnecessary when
checking for idle_cpu() first since an impending wakeup racing with idle
load balancer will either set the "rq->ttwu_pending" or indicate a newly
woken task via "rq->nr_running".
Chasing the reason why this check might have existed in the first place,
I came across Peter's suggestion on the fist iteration of Suresh's
patch from 2011 [1] where the condition to raise the SCHED_SOFTIRQ was:
sched_ttwu_do_pending(list);
if (unlikely((rq->idle == current) &&
rq->nohz_balance_kick &&
!need_resched()))
raise_softirq_irqoff(SCHED_SOFTIRQ);
Since the condition to raise the SCHED_SOFIRQ was preceded by
sched_ttwu_do_pending() (which is equivalent of sched_ttwu_pending()) in
the current upstream kernel, the need_resched() check was necessary to
catch a newly queued task. Peter suggested modifying it to:
if (idle_cpu() && rq->nohz_balance_kick && !need_resched())
raise_softirq_irqoff(SCHED_SOFTIRQ);
where idle_cpu() seems to have replaced "rq->idle == current" check.
Even back then, the idle_cpu() check would have been sufficient to catch
a new task being enqueued. Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") overloads the interpretation of
TIF_NEED_RESCHED for TIF_POLLING_NRFLAG idling, remove the
need_resched() check in nohz_csd_func() to raise SCHED_SOFTIRQ based
on Peter's suggestion.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20241119054432.6405-3-kprateek.nayak@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If PREEMPT_RT is enabled, report_lock is a sleeping spinlock and must not
be locked when IRQs are disabled. However, KASAN reports may be triggered
in such contexts. For example:
char *s = kzalloc(1, GFP_KERNEL);
kfree(s);
local_irq_disable();
char c = *s; /* KASAN report here leads to spin_lock() */
local_irq_enable();
Make report_spinlock a raw spinlock to prevent rescheduling when
PREEMPT_RT is enabled.
KASAN suppresses reports for bad accesses done by the KASAN reporting
code. The reporting code might access poisoned memory for reporting
purposes.
Software KASAN modes do this by suppressing reports during reporting via
current->kasan_depth, the same way they suppress reports during accesses
to poisoned slab metadata.
Hardware Tag-Based KASAN does not use current->kasan_depth, and instead
resets pointer tags for accesses to poisoned memory done by the reporting
code.
Despite that, a recursive report can still happen:
1. On hardware with faulty MTE support. This was observed by Weizhao
Ouyang on a faulty hardware that caused memory tags to randomly change
from time to time.
2. Theoretically, due to a previous MTE-undetected memory corruption.
A recursive report can happen via:
1. Accessing a pointer with a non-reset tag in the reporting code, e.g.
slab->slab_cache, which is what Weizhao Ouyang observed.
2. Theoretically, via external non-annotated routines, e.g. stackdepot.
To resolve this issue, resetting tags for all of the pointers in the
reporting code and all the used external routines would be impractical.
Instead, disable tag checking done by the CPU for the duration of KASAN
reporting for Hardware Tag-Based KASAN.
Without this fix, Hardware Tag-Based KASAN reporting code might deadlock.
[andreyknvl@google.com: disable preemption instead of migration, fix comment typo] Link: https://lkml.kernel.org/r/d14417c8bc5eea7589e99381203432f15c0f9138.1680114854.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/59f433e00f7fa985e8bf9f7caf78574db16b67ab.1678491668.git.andreyknvl@google.com Fixes: 2e903b914797 ("kasan, arm64: implement HW_TAGS runtime") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Weizhao Ouyang <ouyangweizhao@zeku.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: e30a0361b851 ("kasan: make report_lock a raw spinlock") Signed-off-by: Sasha Levin <sashal@kernel.org>
WARNING: CPU: 0 PID: 16 at io_uring/tctx.c:51 __io_uring_free+0xfa/0x140 io_uring/tctx.c:51
which is the
WARN_ON_ONCE(!xa_empty(&tctx->xa));
sanity check in __io_uring_free() when a io_uring_task is going through
its final put. The syzbot test case includes injecting memory allocation
failures, and it very much looks like xa_store() can fail one of its
memory allocations and end up with ->head being non-NULL even though no
entries exist in the xarray.
Until this issue gets sorted out, work around it by attempting to
iterate entries in our xarray, and WARN_ON_ONCE() if one is found.
SG2044 relys on an internal divisor when calculating bitrate, which
means a wrong clock for the most common bitrates. So add a quirk for
this uart device to skip the set rate call and only relys on the
internal UART divisor.
On my device reading entirety of /sys/devices/pnp0/00:03/cmos_nvram0/nvmem
takes about 9 msec during which time interrupts are off on the CPU that
does the read and the thread that performs the read can not be migrated
or preempted by another higher priority thread (RT or not).
Allow readers and writers be preempted by taking and releasing rtc_lock
spinlock for each individual byte read or written rather than once per
read/write request.
Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before
reading data from the EEPROM.
The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing
of the op-code/address from the host to the EEPROM and the reading of
the actual data from the EEPROM.
More info can be found on page 6 of the AT93C46 datasheet (linked below).
Similar notes are found in other 93xx6 datasheets.
In summary the read operation for a 93Cx6 EEPROM is:
Write to EEPROM: 110[A5-A0] (9 bits)
Read from EEPROM: 0[D15-D0] (17 bits)
Where:
110 is the start bit and READ OpCode
[A5-A0] is the address to read from
0 is a "dummy bit" preceding the actual data
[D15-D0] is the actual data.
Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy
bit should be clocked out on the last address bit clock cycle meaning it
should be discarded naturally.
However, depending on the hardware configuration sometimes this dummy
bit is not discarded. This is the case with Exar PCI UARTs which require
an extra clock cycle between sending the address and reading the data.
On some powermacs `escc` nodes are missing `#size-cells` properties,
which is deprecated and now triggers a warning at boot since commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells
handling").
As powermacs boot via prom_init it's possible to add the missing
properties to the device tree during boot, avoiding the warning. Note
that `escc-legacy` nodes are also missing `#size-cells` properties, but
they are skipped by the macio driver, so leave them alone.
Depends-on: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241126025710.591683-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on
deprecated #address-cells/#size-cells handling"):
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0
Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0
The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe
port nodes for ls7a"), which has fixed the issue for ls2k (despite its
subject mentions ls7a).
Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
It has been found that the (non-vendor issued) ACPI ID for Lite-On
LTR303 is present in Microsoft catalog. Add it to the list of the
supported devices.
When completion of a USB transaction results in an error condition, this
bit is set by the Host/Device Controller. This bit is set along with the
USBINT bit, if the TD on which the error interrupt occurred also had its
interrupt on complete (IOC) bit set.
UI is set only when IOC set. Add checking UEI to fix miss call
isr_tr_complete_handler() when IOC have not set and transfer error happen.
Acked-by: Peter Chen <peter.chen@kernel.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20240926022906.473319-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit bab1c299f3945ffe79 ("LoongArch: Fix sleeping in atomic context in
setup_tlb_handler()") changes the gfp flag from GFP_KERNEL to GFP_ATOMIC
for alloc_pages_node(). However, for PREEMPT_RT kernels we can still get
a "sleeping in atomic context" error:
This is because in PREEMPT_RT kernels normal spinlocks are replaced by
rt spinlocks and rt_spin_lock() will cause sleeping. Fix it by disabling
NUMA optimization completely for PREEMPT_RT kernels.
A deadlock may happen since the i3c_master_register() acquires
&i3cbus->lock twice. See the log below.
Use i3cdev->desc->info instead of calling i3c_device_info() to
avoid acquiring the lock twice.
v2:
- Modified the title and commit message
============================================
WARNING: possible recursive locking detected
6.11.0-mainline
--------------------------------------------
init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock
but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register
other info that might help us debug this:
Possible unsafe locking scenario:
Wangxun FF5xxx NICs are similar to SFxxx, RP1000 and RP2000 NICs. They may
be multi-function devices, but they do not advertise an ACS capability.
But the hardware does isolate FF5xxx functions as though it had an ACS
capability and PCI_ACS_RR and PCI_ACS_CR were set in the ACS Control
register, i.e., all peer-to-peer traffic is directed upstream instead of
being routed internally.
Add ACS quirk for FF5xxx NICs in pci_quirk_wangxun_nic_acs() so the
functions can be in independent IOMMU groups.
The "bus" and "cxl_bus" reset methods reset a device by asserting Secondary
Bus Reset on the bridge leading to the device. These only work if the
device is the only device below the bridge.
Add a sysfs 'reset_subordinate' attribute on bridges that can assert
Secondary Bus Reset regardless of how many devices are below the bridge.
This resets all the devices below a bridge in a single command, including
the locking and config space save/restore that reset methods normally do.
This may be the only way to reset devices that don't support other reset
methods (ACPI, FLR, PM reset, etc).
Some computers with CPUs that lack Thunderbolt features use discrete
Thunderbolt chips to add Thunderbolt functionality. These Thunderbolt
chips are located within the chassis; between the Root Port labeled
ExternalFacingPort and the USB-C port.
These Thunderbolt PCIe devices should be labeled as fixed and trusted, as
they are built into the computer. Otherwise, security policies that rely on
those flags may have unintended results, such as preventing USB-C ports
from enumerating.
Detect the above scenario through the process of elimination.
1) Integrated Thunderbolt host controllers already have Thunderbolt
implemented, so anything outside their external facing Root Port is
removable and untrusted.
Detect them using the following properties:
- Most integrated host controllers have the "usb4-host-interface"
ACPI property, as described here:
- Integrated Thunderbolt PCIe Root Ports before Alder Lake do not
have the "usb4-host-interface" ACPI property. Identify those by
their PCI IDs instead.
2) If a Root Port does not have integrated Thunderbolt capabilities, but
has the "ExternalFacingPort" ACPI property, that means the
manufacturer has opted to use a discrete Thunderbolt host controller
that is built into the computer.
This host controller can be identified by virtue of being located
directly below an external-facing Root Port that lacks integrated
Thunderbolt. Label it as trusted and fixed.
Everything downstream from it is untrusted and removable.
The "ExternalFacingPort" ACPI property is described here:
https://learn.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-externally-exposed-pcie-root-ports
Link: https://lore.kernel.org/r/20240910-trust-tbt-fix-v5-1-7a7a42a5f496@chromium.org Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Esther Shimanovich <eshimanovich@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when
the ring is being stopped. Depending on timing between ring stop request
completion, interrupt handler removal and code execution this may lead
to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run
after the io_data pointer is set to NULL in hci_dma_cleanup().
Prevent this my masking the ring interrupts before ring stop request.
creating a large files during checkpoint disable until it runs out of
space and then delete it, then remount to enable checkpoint again, and
then unmount the filesystem triggers the f2fs_bug_on as below:
The root cause is: creating large files during disable checkpoint
period results in not enough free segments, so when writing back root
inode will failed in f2fs_enable_checkpoint. When umount the file
system after enabling checkpoint, the root inode is dirty in
f2fs_evict_inode function, which triggers BUG_ON. The steps to
reproduce are as follows:
dd if=/dev/zero of=f2fs.img bs=1M count=55
mount f2fs.img f2fs_dir -o checkpoint=disable:10%
dd if=/dev/zero of=big bs=1M count=50
sync
rm big
mount -o remount,checkpoint=enable f2fs_dir
umount f2fs_dir
Let's redirty inode when there is not free segments during checkpoint
is disable.
Signed-off-by: Qi Han <hanqi@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch makes the dot parser used by dot2c and dot2k slightly more
robust, namely:
* allows parsing files with the gv extension (GraphViz)
* correctly parses edges with any indentation
* used to work only with a single character (e.g. '\t')
Additionally it fixes a couple of warnings reported by pylint such as
wrong indentation and comparison to False instead of `not ...`
Like commit f1f047bd7ce0 ("smb: client: Fix -Wstringop-overflow issues"),
adjust the memcpy() destination address to be based off the surrounding
object rather than based off the 4-byte "Protocol" member. This avoids a
build-time warning when compiling under CONFIG_FORTIFY_SOURCE with GCC 15:
In function 'fortify_memcpy_chk',
inlined from 'CIFSSMBSetPathInfo' at ../fs/smb/client/cifssmb.c:5358:2:
../include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
571 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When nd_dax is NULL, nd_pfn is consequently NULL as well. Nevertheless,
it is inadvisable to perform pointer arithmetic or address-taking on a
NULL pointer.
Introduce the nd_dax_devinit() function to enhance the code's logic and
improve its readability.
Most drives rewind the tape when the device is reset. Reading and writing
are not allowed until something is done to make the tape position match the
user's expectation (e.g., rewind the tape). Add MTIOCGET and MTLOAD to
operations allowed after reset. MTIOCGET is modified to not touch the tape
if pos_unknown is non-zero. The tape location is known after MTLOAD.
There is NULL pointer issue observed if from Process A where hid device
being added which results in adding a led_cdev addition and later a
another call to access of led_cdev attribute from Process B can result
in NULL pointer issue.
Use mutex led_cdev->led_access to protect access to led->cdev and its
attribute inside brightness_show() and max_brightness_show() and also
update the comment for mutex that it should be used to protect the led
class device fields.
Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with
ufs_hba_variant_ops::set_dma_mask. Update the Renesas driver
accordingly. This patch enables supporting other configurations than
32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org Reviewed-by: Avri Altman <Avri.Altman@wdc.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For no forced preemption model kernel, in the scenario where the
expander is connected to 12 high performance SAS SSDs, the following
call trace may occur:
This is because in the hisi_sas driver, both the hardware interrupt
handler and the interrupt thread are executed on the same CPU. In the
performance test scenario, function irq_wait_for_interrupt() will always
return 0 if lots of interrupts occurs and the CPU will be continuously
consumed. As a result, the CPU cannot run the watchdog thread. When the
watchdog time exceeds the specified time, call trace occurs.
To fix it, add cond_resched() to execute the watchdog thread.
Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-8-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
glibc commit 21571ca0d703 ("Linux: Add the sched_setattr
and sched_getattr functions") now also provides 'struct sched_attr'
and sched_setattr() which collide with the ones from rtla.
In file included from src/trace.c:11:
src/utils.h:49:8: error: redefinition of ‘struct sched_attr’
49 | struct sched_attr {
| ^~~~~~~~~~
In file included from /usr/include/bits/sched.h:60,
from /usr/include/sched.h:43,
from /usr/include/tracefs/tracefs.h:10,
from src/trace.c:4:
/usr/include/linux/sched/types.h:98:8: note: originally defined here
98 | struct sched_attr {
| ^~~~~~~~~~
Define 'struct sched_attr' conditionally, similar to what strace did:
https://lore.kernel.org/all/20240930222913.3981407-1-raj.khem@gmail.com/
and rename rtla's version of sched_setattr() to avoid collision.
Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref)
to use optimized implementation and ease register pressure around
the primitive for targets that implement optimized variant.
In preparation for allowing system call enter/exit instrumentation to
handle page faults, make sure that ftrace can handle this change by
explicitly disabling preemption within the ftrace system call tracepoint
probes to respect the current expectations within ftrace ring buffer
code.
This change does not yet allow ftrace to take page faults per se within
its probe, but allows its existing probes to adapt to the upcoming
change.
Cc: Michael Jeanson <mjeanson@efficios.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: bpf@vger.kernel.org Cc: Joel Fernandes <joel@joelfernandes.org> Link: https://lore.kernel.org/20241009010718.2050182-3-mathieu.desnoyers@efficios.com Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When PINCTRL_IMX_SCU was selected by PINCTRL_IMX8DXL or PINCTRL_IMX8QM
combined with COMPILE_TEST on a non-arm platforms, the IMX_SCU
dependency could not be enabled.
The ndev->npinfo pointer in __netpoll_setup() is RCU-protected but is being
accessed directly for a NULL check. While no RCU read lock is held in this
context, we should still use proper RCU primitives for consistency and
correctness.
Replace the direct NULL check with rcu_access_pointer(), which is the
appropriate primitive when only checking for NULL without dereferencing
the pointer. This function provides the necessary ordering guarantees
without requiring RCU read-side protection.
Commit 51183d233b5a ("net/neighbor: Update neigh_dump_info for strict
data checking") added strict checking. The err variable is not cleared,
so if we find no table to dump we will return the validation error even
if user did not want strict checking.
I think the only way to hit this is to send an buggy request, and ask
for a table which doesn't exist, so there's no point treating this
as a real fix. I only noticed it because a syzbot repro depended on it
to trigger another bug.
Since '1 << rocker_port->pport' may be undefined for port >= 32,
cast the left operand to 'unsigned long long' like it's done in
'rocker_port_set_enable()' above. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
The ordering in hdmi_codec_get_ch_alloc_table_idx() results in
wrong channel allocation for a number of cases, e.g. when ELD
reports FL|FR|LFE|FC|RL|RR or FL|FR|LFE|FC|RL|RR|RC|RLC|RRC:
ca_id 0x01 with speaker mask FL|FR|LFE is selected instead of
ca_id 0x03 with speaker mask FL|FR|LFE|FC for 4 channels
and
ca_id 0x04 with speaker mask FL|FR|RC gets selected instead of
ca_id 0x0b with speaker mask FL|FR|LFE|FC|RL|RR for 6 channels
Fix this by reordering the channel allocation list with most
specific speaker masks at the top.
This fixes not checking if skb really contains an ACL header otherwise
the code may attempt to access some uninitilized/invalid memory past the
valid skb->data.
Reported-by: syzbot+6ea290ba76d8c1eb1ac2@syzkaller.appspotmail.com Tested-by: syzbot+6ea290ba76d8c1eb1ac2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6ea290ba76d8c1eb1ac2 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
qca8k_phy_eth_command() is used to probe the child MDIO bus while the
parent MDIO is locked. This causes lockdep splat, reporting a possible
deadlock. It is not an actually deadlock, because different locks are
used. By making use of mutex_lock_nested() we can avoid this false
positive.
This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.
The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added for each original SKB if tailroom isn't enough to hold tail_pad.
At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop"
in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return
NULL and this causes the oops.
The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle
the worst-case.
Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464
additional bytes of memory.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900.
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver needs to set the correct max_segment_size;
otherwise debug_dma_map_sg() will complain about the
over-mapping of the AMDGPU sg length as following:
It seems that many webcams have buggy firmware and don't expose the
mic capture volume with the proper resolution. We have workarounds in
mixer.c, but judging from the numbers, those can be better managed as
global quirk flags.
Under sriov, host driver will save and restore vf pci cfg space during
reset. And during device init, under sriov, pci_restore_state happens after
fullaccess released, and it can have race condition with mmio protection
enable from host side leading to missing interrupts.
So skip amdgpu_device_cache_pci_state for sriov.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock
otherwise, there's a possible deadlock scenario when
dma debug API is called holding rq_lock():
CPU1 situation can happen when it extending radix tree and
it tries to wake up kswapd via wake_all_kswapd().
CPU2 situation can happen while perf_event_task_sched_out()
(i.e. dma sync operation is called while deleting perf_event using
etm and etr tmc which are Arm Coresight hwtracing driver backends).
To remove this possible situation, call dma_entry_free() after
put_hash_bucket() in check_unmap().
Reported-by: Denis Nikitin <denik@chromium.org> Closes: https://lists.linaro.org/archives/list/coresight@lists.linaro.org/thread/2WMS7BBSF5OZYB63VT44U5YWLFP5HL6U/#RWM6MLQX5ANBTEQ2PRM7OXCBGCE6NPWU Signed-off-by: Levi Yun <yeoreum.yun@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Port this change to vega20_ih.c:
commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts")
Original commit message:
"Why:
Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit
if RB_ENABLE is not set.
How to fix:
Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set.
The RB_ENABLE bit is required to be set, together with
WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit
would clear the RB_OVERFLOW."
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
drm_sched_job_init() has no control over how users allocate struct
drm_sched_job. Unfortunately, the function can also not set some struct
members such as job->sched.
This could theoretically lead to UB by users dereferencing the struct's
pointer members too early.
It is easier to debug such issues if these pointers are initialized to
NULL, so dereferencing them causes a NULL pointer exception.
Accordingly, drm_sched_entity_init() does precisely that and initializes
its struct with memset().
Initialize parameter "job" to 0 in drm_sched_job_init().
projects / thirdparty / kernel / stable.git / log
