When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.
This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.
Fixes: d8a6213d70ac ("geneve: fix header validation in geneve[6]_xmit_skb") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
tcp_v6_syn_recv_sock() calls ip6_dst_store() before
inet_sk(newsk)->pinet6 has been set up.
This means ip6_dst_store() writes over the parent (listener)
np->dst_cookie.
This is racy because multiple threads could share the same
parent and their final np->dst_cookie could be wrong.
Move ip6_dst_store() call after inet_sk(newsk)->pinet6
has been changed and after the copy of parent ipv6_pinfo.
Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Device managed panel bridge wrappers are created by calling to
drm_panel_bridge_add_typed() and registering a release handler for
clean-up when the device gets unbound.
Since the memory for this bridge is also managed and linked to the panel
device, the release function should not try to free that memory.
Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will
fail in this case and emit a warning because the panel bridge resource
is no longer on the device resources list (it has been removed from
there before the call to release handlers).
The default ndo_get_iflink() implementation returns the current ifindex
of the netdev. But the overridden nsim_get_iflink() returns 0 if the
current nsim is not linked, breaking backwards compatibility for
userspace that depend on this behaviour.
Fix the problem by returning the current ifindex if not linked to a
peer.
Fixes: 8debcf5832c3 ("netdevsim: add ndo_get_iflink() implementation") Reported-by: Yu Watanabe <watanabe.yu@gmail.com> Suggested-by: Yu Watanabe <watanabe.yu@gmail.com> Signed-off-by: David Wei <dw@davidwei.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 070246e4674b ("net: stmmac: Fix for mismatched host/device DMA
address width") added support in the stmmac driver for platform drivers
to indicate the host DMA width, but left it up to authors of the
specific platforms to indicate if their width differed from the addr64
register read from the MAC itself.
Qualcomm's EMAC4 integration supports only up to 36 bit width (as
opposed to the addr64 register indicating 40 bit width). Let's indicate
that in the platform driver to avoid a scenario where the driver will
allocate descriptors of size that is supported by the CPU which in our
case is 36 bit, but as the addr64 register is still capable of 40 bits
the device will use two descriptors as one address.
Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms") Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value,
but then it is unconditionally passed to skb_add_rx_frag() which looks
strange and could lead to null pointer dereference.
lio_vf_rep_copy_packet() call trace looks like:
octeon_droq_process_packets
octeon_droq_fast_process_packets
octeon_droq_dispatch_pkt
octeon_create_recv_info
...search in the dispatch_list...
->disp_fn(rdisp->rinfo, ...)
lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...)
In this path there is no code which sets pg_info->page to NULL.
So this check looks unneeded and doesn't solve potential problem.
But I guess the author had reason to add a check and I have no such card
and can't do real test.
In addition, the code in the function liquidio_push_packet() in
liquidio/lio_core.c does exactly the same.
Based on this, I consider the most acceptable compromise solution to
adjust this issue by moving skb_add_rx_frag() into conditional scope.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1f233f327913 ("liquidio: switchdev support for LiquidIO NIC") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is reported that commit 31a0fa0019b0 ("thermal/debugfs: Pass cooling
device state to thermal_debug_cdev_add()") causes the ACPI fan driver
to fail probing on some systems which turns out to be due to the _FST
control method returning an invalid value until _FSL is first evaluated
for the given fan. If this happens, the .get_cur_state() cooling device
callback returns an error and __thermal_cooling_device_register() fails
as uses that callback after commit 31a0fa0019b0.
Arguably, _FST should not return an invalid value even if it is
evaluated before _FSL, so this may be regarded as a platform firmware
issue, but at the same time it is not a good enough reason for failing
the cooling device registration where the initial cooling device state
is only needed to initialize a thermal debug facility.
Accordingly, modify __thermal_cooling_device_register() to avoid
calling thermal_debug_cdev_add() instead of returning an error if the
initial .get_cur_state() callback invocation fails.
Fixes: 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()") Closes: https://lore.kernel.org/linux-acpi/20240530153727.843378-1-laura.nao@collabora.com Reported-by: Laura Nao <laura.nao@collabora.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Laura Nao <laura.nao@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently hns3 ring buffer init process would hold cpu too long with big
Tx/Rx ring depth. This could cause soft lockup.
So this patch adds cond_resched() to the process. Then cpu can break to
run other tasks instead of busy looping.
Fixes: a723fb8efe29 ("net: hns3: refine for set ring parameters") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When link status change, the nic driver need to notify the roce
driver to handle this event, but at this time, the roce driver
may uninit, then cause kernel crash.
To fix the problem, when link status change, need to check
whether the roce registered, and when uninit, need to wait link
update finish.
Fixes: 45e92b7e4e27 ("net: hns3: add calling roce callback function when link status change") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the module is in SFP_MOD_ERROR, `sfp_sm_mod_remove()` will
not be run. As a consequence, `sfp_hwmon_remove()` is not getting
run either, leaving a stale `hwmon` device behind. `sfp_sm_mod_remove()`
itself checks `sfp->sm_mod_state` anyways, so this check was not
really needed in the first place.
Fixes: d2e816c0293f ("net: sfp: handle module remove outside state machine") Signed-off-by: "Csókás, Bence" <csokas.bence@prolan.hu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240605084251.63502-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
These pointers are frequently the same and memcmp does not compare the
pointers before comparing their contents so this was wasting cycles
comparing 16 KiB of memory which will always be equal.
This limit became a hard cap starting with the change referenced below.
Surface creation on the device will fail if the requested size is larger
than this limit so altering the value arbitrarily will expose modes that
are too large for the device's hard limits.
SVGA requires individual surfaces to fit within graphics memory
(max_mob_pages) which means that modes with a final buffer size that would
exceed graphics memory must be pruned otherwise creation will fail.
Additionally llvmpipe requires its buffer height and width to be a multiple
of its tile size which is 64. As a result we have to anticipate that
llvmpipe will round up the mode size passed to it by the compositor when
it creates buffers and filter modes where this rounding exceeds graphics
memory.
This fixes an issue where VMs with low graphics memory (< 64MiB) configured
with high resolution mode boot to a black screen because surface creation
fails.
Clang static checker (scan-build) warning:
o_uring/io-wq.c:line 1051, column 3
The expression is an uninitialized value. The computed value will
also be garbage.
'match.nr_pending' is used in io_acct_cancel_pending_work(), but it is
not fully initialized. Change the order of assignment for 'match' to fix
this problem.
Fixes: 42abc95f05bf ("io-wq: decouple work_list protection from the big wqe->lock") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20240604121242.2661244-1-suhui@nfschina.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Utilize set_bit() and test_bit() on worker->flags within io_uring/io-wq
to address potential data races.
The structure io_worker->flags may be accessed through various data
paths, leading to concurrency issues. When KCSAN is enabled, it reveals
data races occurring in io_worker_handle_work and
io_wq_activate_free_worker functions.
BUG: KCSAN: data-race in io_worker_handle_work / io_wq_activate_free_worker
write to 0xffff8885c4246404 of 4 bytes by task 49071 on cpu 28:
io_worker_handle_work (io_uring/io-wq.c:434 io_uring/io-wq.c:569)
io_wq_worker (io_uring/io-wq.c:?)
<snip>
read to 0xffff8885c4246404 of 4 bytes by task 49024 on cpu 5:
io_wq_activate_free_worker (io_uring/io-wq.c:? io_uring/io-wq.c:285)
io_wq_enqueue (io_uring/io-wq.c:947)
io_queue_iowq (io_uring/io_uring.c:524)
io_req_task_submit (io_uring/io_uring.c:1511)
io_handle_tw_list (io_uring/io_uring.c:1198)
<snip>
Line numbers against commit 18daea77cca6 ("Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/virt/kvm/kvm").
These races involve writes and reads to the same memory location by
different tasks running on different CPUs. To mitigate this, refactor
the code to use atomic operations such as set_bit(), test_bit(), and
clear_bit() instead of basic "and" and "or" operations. This ensures
thread-safe manipulation of worker flags.
Also, move `create_index` to avoid holes in the structure.
iommu_sva_bind_device() should return either a sva bond handle or an
ERR_PTR value in error cases. Existing drivers (idxd and uacce) only
check the return value with IS_ERR(). This could potentially lead to
a kernel NULL pointer dereference issue if the function returns NULL
instead of an error pointer.
In reality, this doesn't cause any problems because iommu_sva_bind_device()
only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA.
In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will
return an error, and the device drivers won't call iommu_sva_bind_device()
at all.
Fixes: 26b25a2b98e4 ("iommu: Bind process address spaces to devices") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20240528042528.71396-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzkaller hit a warning [1] in a call to implement() when trying
to write a value into a field of smaller size in an output report.
Since implement() already has a warn message printed out with the
help of hid_warn() and value in question gets trimmed with:
...
value &= m;
...
WARN_ON may be considered superfluous. Remove it to suppress future
syzkaller triggers.
The TQMx86 GPIO controller only supports falling and rising edge
triggers, but not both. Fix this by implementing a software both-edge
mode that toggles the edge type after every interrupt.
Fixes: b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller") Co-developed-by: Gregor Herburger <gregor.herburger@tq-group.com> Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/515324f0491c4d44f4ef49f170354aca002d81ef.1717063994.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
irq_set_type() should not implicitly unmask the IRQ.
All accesses to the interrupt configuration register are moved to a new
helper tqmx86_gpio_irq_config(). We also introduce the new rule that
accessing irq_type must happen while locked, which will become
significant for fixing EDGE_BOTH handling.
The TQMx86 GPIO controller uses the same register address for input and
output data. Reading the register will always return current inputs
rather than the previously set outputs (regardless of the current
direction setting). Therefore, using a RMW pattern does not make sense
when setting output values. Instead, the previously set output register
value needs to be stored as a shadow register.
As there is no reliable way to get the current output values from the
hardware, also initialize all channels to 0, to ensure that stored and
actual output values match. This should usually not have any effect in
practise, as the TQMx86 UEFI sets all outputs to 0 during boot.
Also prepare for extension of the driver to more than 8 GPIOs by using
DECLARE_BITMAP.
When reading token data from sysfs on my Inspiron 3505, the token
locations and values are wrong. This happens because match_attribute()
blindly assumes that all entries in da_tokens have an associated
entry in token_attrs.
This however is not true as soon as da_tokens[] contains zeroed
token entries. Those entries are being skipped when initialising
token_attrs, breaking the core assumption of match_attribute().
Fix this by defining an extra struct for each pair of token attributes
and use container_of() to retrieve token information.
Tested on a Dell Inspiron 3050.
Fixes: 33b9ca1e53b4 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240528204903.445546-1-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
futex_requeue_pi.c:403:17: warning: passing 'const char **' to parameter
of type 'char **' discards qualifiers in nested pointer types
[-Wincompatible-pointer-types-discards-qualifiers]
This warning fires because test_name is passed into asprintf(3), which
then changes it.
Fix this by simply removing the const qualifier. This is a local
automatic variable in a very short function, so there is not much need
to use the compiler to enforce const-ness at this scope.
Fixes: f17d8a87ecb5 ("selftests: fuxex: Report a unique test name per run of futex_requeue_pi") Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit eb50d0f250e9 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250e9 ("selftests/ftrace: Choose target function for filter test from samples") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
dentry->d_fsdata is set to NFS_FSDATA_BLOCKED while unlinking or
renaming-over a file to ensure that no open succeeds while the NFS
operation progressed on the server.
Setting dentry->d_fsdata to NFS_FSDATA_BLOCKED is done under ->d_lock
after checking the refcount is not elevated. Any attempt to open the
file (through that name) will go through lookp_open() which will take
->d_lock while incrementing the refcount, we can be sure that once the
new value is set, __nfs_lookup_revalidate() *will* see the new value and
will block.
We don't have any locking guarantee that when we set ->d_fsdata to NULL,
the wait_var_event() in __nfs_lookup_revalidate() will notice.
wait/wake primitives do NOT provide barriers to guarantee order. We
must use smp_load_acquire() in wait_var_event() to ensure we look at an
up-to-date value, and must use smp_store_release() before wake_up_var().
This patch adds those barrier functions and factors out
block_revalidate() and unblock_revalidate() far clarity.
There is also a hypothetical bug in that if memory allocation fails
(which never happens in practice) we might leave ->d_fsdata locked.
This patch adds the missing call to unblock_revalidate().
In commit 4ca9f31a2be66 ("NFSv4.1 test and add 4.1 trunking transport"),
we introduce the ability to query the NFS server for possible trunking
locations of the existing filesystem. However, we never checked the
returned file system path for these alternative locations. According
to the RFC, the server can say that the filesystem currently known
under "fs_root" of fs_location also resides under these server
locations under the following "rootpath" pathname. The client cannot
handle trunking a filesystem that reside under different location
under different paths other than what the main path is. This patch
enforces the check that fs_root path and rootpath path in fs_location
reply is the same.
Fixes: 4ca9f31a2be6 ("NFSv4.1 test and add 4.1 trunking transport") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
These clkdevs were unnecessary, because systems using this driver always
look up clocks using the devicetree. And as Russell King points out[1],
since the provided device name was truncated, lookups via clkdev would
never match.
Recently, commit 8d532528ff6a ("clkdev: report over-sized strings when
creating clkdev entries") caused clkdev registration to fail due to the
truncation, and this now prevents the driver from probing. Fix the
driver by removing the clkdev registration.
Link: https://lore.kernel.org/linux-clk/ZkfYqj+OcAxd9O2t@shell.armlinux.org.uk/ Fixes: 30b8e27e3b58 ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block") Fixes: 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries") Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/linux-clk/7eda7621-0dde-4153-89e4-172e4c095d01@roeck-us.net/ Suggested-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20240528001432.1200403-1-samuel.holland@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat`
event for defining eprobe on it. Since this `syscalls` events depend on
CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail.
Add the event file to `required` line so that the test will return
`unsupported` result.
The pcmtest driver tests use the kselftest harness which requires that
_GNU_SOURCE is defined but nothing causes it to be defined. Since the
KHDR_INCLUDES Makefile variable has had the required define added let's
use that, this should provide some futureproofing.
Fixes: daef47b89efd ("selftests: Compile kselftest headers with -D_GNU_SOURCE") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In ondemand mode, when the daemon is processing an open request, if the
kernel flags the cache as CACHEFILES_DEAD, the cachefiles_daemon_write()
will always return -EIO, so the daemon can't pass the copen to the kernel.
Then the kernel process that is waiting for the copen triggers a hung_task.
Since the DEAD state is irreversible, it can only be exited by closing
/dev/cachefiles. Therefore, after calling cachefiles_io_error() to mark
the cache as CACHEFILES_DEAD, if in ondemand mode, flush all requests to
avoid the above hungtask. We may still be able to read some of the cached
data before closing the fd of /dev/cachefiles.
Note that this relies on the patch that adds reference counting to the req,
otherwise it may UAF.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie") Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240522114308.2402121-12-libaokun@huaweicloud.com Acked-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After installing the anonymous fd, we can now see it in userland and close
it. However, at this point we may not have gotten the reference count of
the cache, but we will put it during colse fd, so this may cause a cache
UAF.
So grab the cache reference count before fd_install(). In addition, by
kernel convention, fd is taken over by the user land after fd_install(),
and the kernel should not call close_fd() after that, i.e., it should call
fd_install() after everything is ready, thus fd_install() is called after
copy_to_user() succeeds.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie") Suggested-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240522114308.2402121-10-libaokun@huaweicloud.com Acked-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Now every time the daemon reads an open request, it gets a new anonymous fd
and ondemand_id. With the introduction of "restore", it is possible to read
the same open request more than once, and therefore an object can have more
than one anonymous fd.
If the anonymous fd is not unique, the following concurrencies will result
in an fd leak:
t1 | t2 | t3
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
load->fd = fd0
ondemand_id = object_id0
------ restore ------
cachefiles_ondemand_restore
// restore REQ_A
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
load->fd = fd1
ondemand_id = object_id1
process_open_req(REQ_A)
write(devfd, ("copen %u,%llu", msg->msg_id, size))
cachefiles_ondemand_copen
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
kfree(REQ_A)
process_open_req(REQ_A)
// copen fails due to no req
// daemon close(fd1)
cachefiles_ondemand_fd_release
// set object closed
-- umount --
cachefiles_withdraw_cookie
cachefiles_ondemand_clean_object
cachefiles_ondemand_init_close_req
if (!cachefiles_ondemand_object_is_open(object))
return -ENOENT;
// The fd0 is not closed until the daemon exits.
However, the anonymous fd holds the reference count of the object and the
object holds the reference count of the cookie. So even though the cookie
has been relinquished, it will not be unhashed and freed until the daemon
exits.
In fscache_hash_cookie(), when the same cookie is found in the hash list,
if the cookie is set with the FSCACHE_COOKIE_RELINQUISHED bit, then the new
cookie waits for the old cookie to be unhashed, while the old cookie is
waiting for the leaked fd to be closed, if the daemon does not exit in time
it will trigger a hung task.
To avoid this, allocate a new anonymous fd only if no anonymous fd has
been allocated (ondemand_id == 0) or if the previously allocated anonymous
fd has been closed (ondemand_id == -1). Moreover, returns an error if
ondemand_id is valid, letting the daemon know that the current userland
restore logic is abnormal and needs to be checked.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie") Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240522114308.2402121-9-libaokun@huaweicloud.com Acked-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The err_put_fd label is only used once, so remove it to make the code
more readable. In addition, the logic for deleting error request and
CLOSE request is merged to simplify the code.
Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240522114308.2402121-6-libaokun@huaweicloud.com Acked-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4988e35e95fc ("cachefiles: never get a new anonymous fd if ondemand_id is valid") Signed-off-by: Sasha Levin <sashal@kernel.org>
The following concurrency may cause a read request to fail to be completed
and result in a hung:
t1 | t2
---------------------------------------------------------
cachefiles_ondemand_copen
req = xa_erase(&cache->reqs, id)
// Anon fd is maliciously closed.
cachefiles_ondemand_fd_release
xa_lock(&cache->reqs)
cachefiles_ondemand_set_object_close(object)
xa_unlock(&cache->reqs)
cachefiles_ondemand_set_object_open
// No one will ever close it again.
cachefiles_ondemand_daemon_read
cachefiles_ondemand_select_req
// Get a read req but its fd is already closed.
// The daemon can't issue a cread ioctl with an closed fd, then hung.
So add spin_lock for cachefiles_ondemand_info to protect ondemand_id and
state, thus we can avoid the above problem in cachefiles_ondemand_copen()
by using ondemand_id to determine if fd has been closed.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie") Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240522114308.2402121-8-libaokun@huaweicloud.com Acked-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60
Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963
When we see the request within xa_lock, req->object must not have been
freed yet, so grab the reference count of object before xa_unlock to
avoid the above issue.
Fixes: 0a7e54c1959c ("cachefiles: resend an open request if the read request's object is closed") Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240522114308.2402121-5-libaokun@huaweicloud.com Acked-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com> Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0x609/0xab0
Write of size 4 at addr ffff888109164a80 by task ondemand-04-dae/4962
This issue is caused by issuing a restore command when the daemon is still
alive, which results in a request being processed multiple times thus
triggering a UAF. So to avoid this problem, add an additional reference
count to cachefiles_req, which is held while waiting and reading, and then
released when the waiting and reading is over.
Note that since there is only one reference count for waiting, we need to
avoid the same request being completed multiple times, so we can only
complete the request if it is successfully removed from the xarray.
Fixes: e73fa11a356c ("cachefiles: add restore command to recover inflight ondemand read requests") Suggested-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240522114308.2402121-4-libaokun@huaweicloud.com Acked-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com> Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie") Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240522114308.2402121-2-libaokun@huaweicloud.com Acked-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
tools/testing/cxl/test/mem.c uses vmalloc() and vfree() but does not
include linux/vmalloc.h. Kernel v6.10 made changes that causes the
currently included headers not depend on vmalloc.h and therefore
mem.c can no longer compile. Add linux/vmalloc.h to fix compile
issue.
CC [M] tools/testing/cxl/test/mem.o
tools/testing/cxl/test/mem.c: In function ‘label_area_release’:
tools/testing/cxl/test/mem.c:1428:9: error: implicit declaration of function ‘vfree’; did you mean ‘kvfree’? [-Werror=implicit-function-declaration]
1428 | vfree(lsa);
| ^~~~~
| kvfree
tools/testing/cxl/test/mem.c: In function ‘cxl_mock_mem_probe’:
tools/testing/cxl/test/mem.c:1466:22: error: implicit declaration of function ‘vmalloc’; did you mean ‘kmalloc’? [-Werror=implicit-function-declaration]
1466 | mdata->lsa = vmalloc(LSA_SIZE);
| ^~~~~~~
| kmalloc
Fixes: 7d3eb23c4ccf ("tools/testing/cxl: Introduce a mock memory device + driver") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Link: https://lore.kernel.org/r/20240528225551.1025977-1-dave.jiang@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Building ppc64le_defconfig with GCC 14 fails with assembler errors:
CC fs/readdir.o
/tmp/ccdQn0mD.s: Assembler messages:
/tmp/ccdQn0mD.s:212: Error: operand out of domain (18 is not a multiple of 4)
/tmp/ccdQn0mD.s:226: Error: operand out of domain (18 is not a multiple of 4)
... [6 lines]
/tmp/ccdQn0mD.s:1699: Error: operand out of domain (18 is not a multiple of 4)
The 'std' instruction requires a 4-byte aligned displacement because
it is a DS-form instruction, and as the assembler says, 18 is not a
multiple of 4.
A similar error is seen with GCC 13 and CONFIG_UBSAN_SIGNED_WRAP=y.
The fix is to change the constraint on the memory operand to put_user(),
from "m" which is a general memory reference to "YZ".
The "Z" constraint is documented in the GCC manual PowerPC machine
constraints, and specifies a "memory operand accessed with indexed or
indirect addressing". "Y" is not documented in the manual but specifies
a "memory operand for a DS-form instruction". Using both allows the
compiler to generate a DS-form "std" or X-form "stdx" as appropriate.
The change has to be conditional on CONFIG_PPC_KERNEL_PREFIXED because
the "Y" constraint does not guarantee 4-byte alignment when prefixed
instructions are enabled.
Unfortunately clang doesn't support the "Y" constraint so that has to be
behind an ifdef.
Although the build error is only seen with GCC 13/14, that appears
to just be luck. The constraint has been incorrect since it was first
added.
Fixes: c20beffeec3c ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()") Cc: stable@vger.kernel.org # v5.10+ Suggested-by: Kewen Lin <linkw@gcc.gnu.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240529123029.146953-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 5c4233cc0920 ("powerpc/kdump: Split KEXEC_CORE and
CRASH_DUMP dependency"), crashing_cpu is not available without
CONFIG_CRASH_DUMP. Fix compile error on 64-BIT 85xx owing to this
change.
Fixes: 5c4233cc0920 ("powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency") Cc: stable@vger.kernel.org # v6.9+ Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Closes: https://lore.kernel.org/all/fa247ae4-5825-4dbe-a737-d93b7ab4d4b9@xenosoft.de/ Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240510080757.560159-1-hbathini@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it
is freed with dev_kfree_skb_any(). This can result in a subsequent call
to napi_get_frags returning a dangling pointer.
Fix this by clearing napi->skb before the skb is freed.
Commit 321da3dc1f3c ("scsi: sd: usb_storage: uas: Access media prior
to querying device properties") triggered a read to LBA 0 before
attempting to inquire about device characteristics. This was done
because some protocol bridge devices will return generic values until
an attached storage device's media has been accessed.
Pierre Tomon reported that this change caused problems on a large
capacity external drive connected via a bridge device. The bridge in
question does not appear to implement the READ(10) command.
Issue a READ(16) instead of READ(10) when a device has been identified
as preferring 16-byte commands (use_16_for_rw heuristic).
There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:
BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas
Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965
For full log, please look at [1].
Make the allocation at least the size of sizeof(unsigned long) so that
set_bit() and test_bit() have sufficient room for read/write operations
without overwriting unallocated memory.
Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/ Fixes: c696f7b83ede ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path") Cc: stable@vger.kernel.org Suggested-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240605085530.499432-1-leitao@debian.org Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to
the HBA if a read or write command directed at an ATA device should be
translated to an NCQ read/write command with the high prioiryt bit set
when the request uses the RT priority class and the user has enabled NCQ
priority through sysfs.
However, unlike the mpt3sas driver, the mpi3mr driver does not define
the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so
the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never
actually set and NCQ Priority cannot ever be used.
Fix this by defining these missing atributes to allow a user to check if
an ATA device supports NCQ priority and to enable/disable the use of NCQ
priority. To do this, lift the function scsih_ncq_prio_supp() out of the
mpt3sas driver and make it the generic SCSI SAS transport function
sas_ata_ncq_prio_supported(). Nothing in that function is hardware
specific, so this function can be used in both the mpt3sas driver and
the mpi3mr driver.
Reported-by: Scott McCoy <scott.mccoy@wdc.com> Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For SCSI devices supporting the Command Duration Limits feature set, the
user can enable/disable this feature use through the sysfs device attribute
"cdl_enable". This attribute modification triggers a call to
scsi_cdl_enable() to enable and disable the feature for ATA devices and set
the scsi device cdl_enable field to the user provided bool value. For SCSI
devices supporting CDL, the feature set is always enabled and
scsi_cdl_enable() is reduced to setting the cdl_enable field.
However, for ATA devices, a drive may spin-up with the CDL feature enabled
by default. But the SCSI device cdl_enable field is always initialized to
false (CDL disabled), regardless of the actual device CDL feature
state. For ATA devices managed by libata (or libsas), libata-core always
disables the CDL feature set when the device is attached, thus syncing the
state of the CDL feature on the device and of the SCSI device cdl_enable
field. However, for ATA devices connected to a SAS HBA, the CDL feature is
not disabled on scan for ATA devices that have this feature enabled by
default, leading to an inconsistent state of the feature on the device with
the SCSI device cdl_enable field.
Avoid this inconsistency by adding a call to scsi_cdl_enable() in
scsi_cdl_check() to make sure that the device-side state of the CDL feature
set always matches the scsi device cdl_enable field state. This implies
that CDL will always be disabled for ATA devices connected to SAS HBAs,
which is consistent with libata/libsas initialization of the device.
Reported-by: Scott McCoy <scott.mccoy@wdc.com> Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240607012507.111488-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SCSI Removable Media Bit (RMB) should only be set for removable media,
where the device stays and the media changes, e.g. CD-ROM or floppy.
The ATA removable media device bit is obsoleted since ATA-8 ACS (2006),
but before that it was used to indicate that the device can have its media
removed (while the device stays).
Commit 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as
removable") introduced a change to set the RMB bit if the port has either
the eSATA bit or the hot-plug capable bit set. The reasoning was that the
author wanted his eSATA ports to get treated like a USB stick.
This is however wrong. See "20-082r23SPC-6: Removable Medium Bit
Expectations" which has since been integrated to SPC, which states that:
"""
Reports have been received that some USB Memory Stick device servers set
the removable medium (RMB) bit to one. The rub comes when the medium is
actually removed, because... The device server is removed concurrently
with the medium removal. If there is no device server, then there is no
device server that is waiting to have removable medium inserted.
Sufficient numbers of SCSI analysts see such a device:
- not as a device that supports removable medium;
but
- as a removable, hot pluggable device.
"""
The definition of the RMB bit in the SPC specification has since been
clarified to match this.
Thus, a USB stick should not have the RMB bit set (and neither shall an
eSATA nor a hot-plug capable port).
Commit dc8b4afc4a04 ("ata: ahci: don't mark HotPlugCapable Ports as
external/removable") then changed so that the RMB bit is only set for the
eSATA bit (and not for the hot-plug capable bit), because of a lot of bug
reports of SATA devices were being automounted by udisks. However,
treating eSATA and hot-plug capable ports differently is not correct.
From the AHCI 1.3.1 spec:
Hot Plug Capable Port (HPCP): When set to '1', indicates that this port's
signal and power connectors are externally accessible via a joint signal
and power connector for blindmate device hot plug.
So a hot-plug capable port is an external port, just like commit 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port")
claims.
In order to not violate the SPC specification, modify the SCSI INQUIRY
data to only set the RMB bit if the ATA device can have its media removed.
This fixes a reported problem where GNOME/udisks was automounting devices
connected to hot-plug capable ports.
Fixes: 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Thomas Weißschuh <linux@weissschuh.net> Reported-by: Thomas Weißschuh <linux@weissschuh.net> Closes: https://lore.kernel.org/linux-ide/c0de8262-dc4b-4c22-9fac-33432e5bddd3@t-8ch.de/ Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[cassel: wrote commit message] Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The margin debugfs node controls the "Enable Margin Test" field of the
lane margining operations. This field selects between either low or high
voltage margin values for voltage margin test or left or right timing
margin values for timing margin test.
According to the USB4 specification, whether or not the "Enable Margin
Test" control applies, depends on the values of the "Independent
High/Low Voltage Margin" or "Independent Left/Right Timing Margin"
capability fields for voltage and timing margin tests respectively. The
pre-existing condition enabled the debugfs node also in the case where
both low/high or left/right margins are returned, which is incorrect.
This change only enables the debugfs node in question, if the specific
required capability values are met.
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com> Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As described in commit 8f873c1ff4ca ("xhci: Blacklist using streams on the
Etron EJ168 controller"), EJ188 have the same issue as EJ168, where Streams
do not work reliable on EJ188. So apply XHCI_BROKEN_STREAMS quirk to EJ188
as well.
When multiple streams are in use, multiple TDs might be in flight when
an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for
each, to ensure everything is reset properly and the caches cleared.
Change the logic so that any N>1 TDs found active for different streams
are deferred until after the first one is processed, calling
xhci_invalidate_cancelled_tds() again from xhci_handle_cmd_set_deq() to
queue another command until we are done with all of them. Also change
the error/"should never happen" paths to ensure we at least clear any
affected TDs, even if we can't issue a command to clear the hardware
cache, and complain loudly with an xhci_warn() if this ever happens.
This problem case dates back to commit e9df17eb1408 ("USB: xhci: Correct
assumptions about number of rings per endpoint.") early on in the XHCI
driver's life, when stream support was first added.
It was then identified but not fixed nor made into a warning in commit 674f8438c121 ("xhci: split handling halted endpoints into two steps"),
which added a FIXME comment for the problem case (without materially
changing the behavior as far as I can tell, though the new logic made
the problem more obvious).
Then later, in commit 94f339147fc3 ("xhci: Fix failure to give back some
cached cancelled URBs."), it was acknowledged again.
[Mathias: commit 94f339147fc3 ("xhci: Fix failure to give back some cached
cancelled URBs.") was a targeted regression fix to the previously mentioned
patch. Users reported issues with usb stuck after unmounting/disconnecting
UAS devices. This rolled back the TD clearing of multiple streams to its
original state.]
Apparently the commit author was aware of the problem (yet still chose
to submit it): It was still mentioned as a FIXME, an xhci_dbg() was
added to log the problem condition, and the remaining issue was mentioned
in the commit description. The choice of making the log type xhci_dbg()
for what is, at this point, a completely unhandled and known broken
condition is puzzling and unfortunate, as it guarantees that no actual
users would see the log in production, thereby making it nigh
undebuggable (indeed, even if you turn on DEBUG, the message doesn't
really hint at there being a problem at all).
It took me *months* of random xHC crashes to finally find a reliable
repro and be able to do a deep dive debug session, which could all have
been avoided had this unhandled, broken condition been actually reported
with a warning, as it should have been as a bug intentionally left in
unfixed (never mind that it shouldn't have been left in at all).
> Another fix to solve clearing the caches of all stream rings with
> cancelled TDs is needed, but not as urgent.
3 years after that statement and 14 years after the original bug was
introduced, I think it's finally time to fix it. And maybe next time
let's not leave bugs unfixed (that are actually worse than the original
bug), and let's actually get people to review kernel commits please.
Fixes xHC crashes and IOMMU faults with UAS devices when handling
errors/faults. Easiest repro is to use `hdparm` to mark an early sector
(e.g. 1024) on a disk as bad, then `cat /dev/sdX > /dev/null` in a loop.
At least in the case of JMicron controllers, the read errors end up
having to cancel two TDs (for two queued requests to different streams)
and the one that didn't get cleared properly ends up faulting the xHC
entirely when it tries to access DMA pages that have since been unmapped,
referred to by the stale TDs. This normally happens quickly (after two
or three loops). After this fix, I left the `cat` in a loop running
overnight and experienced no xHC failures, with all read errors
recovered properly. Repro'd and tested on an Apple M1 Mac Mini
(dwc3 host).
On systems without an IOMMU, this bug would instead silently corrupt
freed memory, making this a security bug (even on systems with IOMMUs
this could silently corrupt memory belonging to other USB devices on the
same controller, so it's still a security bug). Given that the kernel
autoprobes partition tables, I'm pretty sure a malicious USB device
pretending to be a UAS device and reporting an error with the right
timing could deliberately trigger a UAF and write to freed memory, with
no user action.
[Mathias: Commit message and code comment edit, original at:]
https://lore.kernel.org/linux-usb/20240524-xhci-streams-v1-1-6b1f13819bea@marcan.st/
Fixes: e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") Fixes: 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs.") Fixes: 674f8438c121 ("xhci: split handling halted endpoints into two steps") Cc: stable@vger.kernel.org Cc: security@kernel.org Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240611120610.3264502-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As described in commit c877b3b2ad5c ("xhci: Add reset on resume quirk for
asrock p67 host"), EJ188 have the same issue as EJ168, where completely
dies on resume. So apply XHCI_RESET_ON_RESUME quirk to EJ188 as well.
The transferred length is set incorrectly for cancelled bulk
transfer TDs in case the bulk transfer ring stops on the last transfer
block with a 'Stop - Length Invalid' completion code.
length essentially ends up being set to the requested length:
urb->actual_length = urb->transfer_buffer_length
Length for 'Stop - Length Invalid' cases should be the sum of all
TRB transfer block lengths up to the one the ring stopped on,
_excluding_ the one stopped on.
Fix this by always summing up TRB lengths for 'Stop - Length Invalid'
bulk cases.
This issue was discovered by Alan Stern while debugging
https://bugzilla.kernel.org/show_bug.cgi?id=218890, but does not
solve that bug. Issue is older than 4.10 kernel but fix won't apply
to those due to major reworks in that area.
Tested-by: Pierre Tomon <pierretom+12@ik.me> Cc: stable@vger.kernel.org # v4.10+ Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240611120610.3264502-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log.
The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when
trying to link a root mount point. This cannot work in practice because
this directory is mounted, but the VFS check is done after the call to
security_path_link().
Do not use source directory's d_parent when the source directory is the
mount point.
Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Cc: stable@vger.kernel.org Reported-by: syzbot+bf4903dc7e12b18ebc87@syzkaller.appspotmail.com Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER") Closes: https://lore.kernel.org/r/000000000000553d3f0618198200@google.com Link: https://lore.kernel.org/r/20240516181935.1645983-2-mic@digikod.net
[mic: Fix commit message] Signed-off-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently, suspend testing on sc7180-trogdor based devices has started
to sometimes fail with messages like this:
port a88000.serial:0.0: PM: calling pm_runtime_force_suspend+0x0/0xf8 @ 28934, parent: a88000.serial:0
port a88000.serial:0.0: PM: dpm_run_callback(): pm_runtime_force_suspend+0x0/0xf8 returns -16
port a88000.serial:0.0: PM: pm_runtime_force_suspend+0x0/0xf8 returned -16 after 33 usecs
port a88000.serial:0.0: PM: failed to suspend: error -16
I could reproduce these problems by logging in via an agetty on the
debug serial port (which was _not_ used for kernel console) and
running:
cat /var/log/messages
...and then (via an SSH session) forcing a few suspend/resume cycles.
Tracing through the code and doing some printf()-based debugging shows
that the -16 (-EBUSY) comes from the recently added
serial_port_runtime_suspend().
The idea of the serial_port_runtime_suspend() function is to prevent
the port from being _runtime_ suspended if it still has bytes left to
transmit. Having bytes left to transmit isn't a reason to block
_system_ suspend, though. If a serdev device in the kernel needs to
block system suspend it should block its own suspend and it can use
serdev_device_wait_until_sent() to ensure bytes are sent.
The DEFINE_RUNTIME_DEV_PM_OPS() used by the serial_port code means
that the system suspend function will be pm_runtime_force_suspend().
In pm_runtime_force_suspend() we can see that before calling the
runtime suspend function we'll call pm_runtime_disable(). This should
be a reliable way to detect that we're called from system suspend and
that we shouldn't look for busyness.
Fixes: 43066e32227e ("serial: port: Don't suspend if the port is still busy") Cc: stable@vger.kernel.org Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240531080914.v3.1.I2395e66cf70c6e67d774c56943825c289b9c13e4@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FIFO is 64 bytes, but the FCR is configured to fire the TX interrupt
when the FIFO is half empty (bit 3 = 0). Thus, we should only write 32
bytes when a TX interrupt occurs.
This fixes a problem observed on the PXA168 that dropped a bunch of TX
bytes during large transmissions.
Fixes: ab28f51c77cd ("serial: rewrite pxa2xx-uart to use 8250_core") Signed-off-by: Doug Brown <doug@schmorgal.com> Link: https://lore.kernel.org/r/20240519191929.122202-1-doug@schmorgal.com Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When lookahead has "consumed" some characters (la_count > 0),
n_tty_receive_buf_standard() and n_tty_receive_buf_closing() for
characters beyond the la_count are given wrong cp/fp offsets which
leads to duplicating and losing some characters.
If la_count > 0, correct buffer pointers and make count consistent too
(the latter is not strictly necessary to fix the issue but seems more
logical to adjust all variables immediately to keep state consistent).
The dynamically created mei client device (mei csi) is used as one V4L2
sub device of the whole video pipeline, and the V4L2 connection graph is
built by software node. The mei_stop() and mei_restart() will delete the
old mei csi client device and create a new mei client device, which will
cause the software node information saved in old mei csi device lost and
the whole video pipeline will be broken.
Removing mei_stop()/mei_restart() during system suspend/resume can fix
the issue above and won't impact hardware actual power saving logic.
Fixes: f6085a96c973 ("mei: vsc: Unregister interrupt handler for system suspend") Cc: stable@vger.kernel.org # for 6.8+ Reported-by: Hao Yao <hao.yao@intel.com> Signed-off-by: Wentong Wu <wentong.wu@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Jason Chen <jason.z.chen@intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240527123835.522384-1-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to what fixed in Commit a6fe37f428c1 ("usb: typec: tcpm: Skip
hard reset when in error recovery"), the handling of the received Hard
Reset has to be skipped during TOGGLING state.
There could be a potential use-after-free case in
tcpm_register_source_caps(). This could happen when:
* new (say invalid) source caps are advertised
* the existing source caps are unregistered
* tcpm_register_source_caps() returns with an error as
usb_power_delivery_register_capabilities() fails
This causes port->partner_source_caps to hold on to the now freed source
caps.
Reset port->partner_source_caps value to NULL after unregistering
existing source caps.
Fixes: 230ecdf71a64 ("usb: typec: tcpm: unregister existing source caps before re-registration") Cc: stable@vger.kernel.org Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Ondrej Jirman <megi@xff.cz> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240514220134.2143181-1-amitsd@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH
workqueue"), usb_giveback_urb_bh() runs in the BH workqueue with
interrupts enabled.
Thus, the remote coverage collection section in usb_giveback_urb_bh()->
__usb_hcd_giveback_urb() might be interrupted, and the interrupt handler
might invoke __usb_hcd_giveback_urb() again.
This breaks KCOV, as it does not support nested remote coverage collection
sections within the same context (neither in task nor in softirq).
Update kcov_remote_start/stop_usb_softirq() to disable interrupts for the
duration of the coverage collection section to avoid nested sections in
the softirq context (in addition to such in the task context, which are
already handled).
The syzbot fuzzer found that the interrupt-URB completion callback in
the cdc-wdm driver was taking too long, and the driver's immediate
resubmission of interrupt URBs with -EPROTO status combined with the
dummy-hcd emulation to cause a CPU lockup:
cdc_wdm 1-1:1.0: nonzero urb status received: -71
cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes
watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625]
CPU#0 Utilization every 4s during lockup:
#1: 98% system, 0% softirq, 3% hardirq, 0% idle
#2: 98% system, 0% softirq, 3% hardirq, 0% idle
#3: 98% system, 0% softirq, 3% hardirq, 0% idle
#4: 98% system, 0% softirq, 3% hardirq, 0% idle
#5: 98% system, 1% softirq, 3% hardirq, 0% idle
Modules linked in:
irq event stamp: 73096
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline]
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994
hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline]
softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582
softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588
CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Testing showed that the problem did not occur if the two error
messages -- the first two lines above -- were removed; apparently adding
material to the kernel log takes a surprisingly large amount of time.
In any case, the best approach for preventing these lockups and to
avoid spamming the log with thousands of error messages per second is
to ratelimit the two dev_err() calls. Therefore we replace them with
dev_err_ratelimited().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Greg KH <gregkh@linuxfoundation.org> Reported-and-tested-by: syzbot+5f996b83575ef4058638@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/00000000000073d54b061a6a1c65@google.com/ Reported-and-tested-by: syzbot+1b2abad17596ad03dcff@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000f45085061aa9b37e@google.com/ Fixes: 9908a32e94de ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/40dfa45b-5f21-4eef-a8c1-51a2f320e267@rowland.harvard.edu/ Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/29855215-52f5-4385-b058-91f42c2bee18@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only the current owner of a request is allowed to write into req->flags.
Hence, the cancellation path should never touch it. Add a new field
instead of the flag, move it into the 3rd cache line because it should
always be initialised. poll_refs can move further as polling is an
involved process anyway.
It's a minimal patch, in the future we can and should find a better
place for it and remove now unused REQ_F_CANCEL_SEQ.
Fixes: 521223d7c229f ("io_uring/cancel: don't default to setting req->work.cancel_seq") Cc: stable@vger.kernel.org Reported-by: Li Shi <sl1589472800@gmail.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6827b129f8f0ad76fa9d1f0a773de938b240ffab.1718323430.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a report of io_rsrc_ref_quiesce() locking a mutex while not
TASK_RUNNING, which is due to forgetting restoring the state back after
io_run_task_work_sig() and attempts to break out of the waiting loop.
do not call blocking ops when !TASK_RUNNING; state=1 set at
[<ffffffff815d2494>] prepare_to_wait+0xa4/0x380
kernel/sched/wait.c:237
WARNING: CPU: 2 PID: 397056 at kernel/sched/core.c:10099
__might_sleep+0x114/0x160 kernel/sched/core.c:10099
RIP: 0010:__might_sleep+0x114/0x160 kernel/sched/core.c:10099
Call Trace:
<TASK>
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0xb4/0x940 kernel/locking/mutex.c:752
io_rsrc_ref_quiesce+0x590/0x940 io_uring/rsrc.c:253
io_sqe_buffers_unregister+0xa2/0x340 io_uring/rsrc.c:799
__io_uring_register io_uring/register.c:424 [inline]
__do_sys_io_uring_register+0x5b9/0x2400 io_uring/register.c:613
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd8/0x270 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6f/0x77
Some editors (like the vim variants), when seeing "trim_whitespace"
decide to do just that for all of the whitespace in the file you are
saving, even if it is not on a line that you have modified. This plays
havoc with diffs and is NOT something that should be intended.
As the "only trim whitespace on modified lines" is not part of the
editorconfig standard yet, just delete these lines from the
.editorconfig file so that we don't end up with diffs that are
automatically rejected by maintainers for containing things they
shouldn't.
Cc: Danny Lin <danny@kdrag0n.dev> Cc: Íñigo Huguet <ihuguet@redhat.com> Cc: Mickaël Salaün <mic@digikod.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Fixes: 5a602de99797 ("Add .editorconfig file for basic formatting") Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/2024061137-jawless-dipped-e789@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The change to update the permissions of the eventfs_inode had the
misconception that using the tracefs_inode would find all the
eventfs_inodes that have been updated and reset them on remount.
The problem with this approach is that the eventfs_inodes are freed when
they are no longer used (basically the reason the eventfs system exists).
When they are freed, the updated eventfs_inodes are not reset on a remount
because their tracefs_inodes have been freed.
Instead, since the events directory eventfs_inode always has a
tracefs_inode pointing to it (it is not freed when finished), and the
events directory has a link to all its children, have the
eventfs_remount() function only operate on the events eventfs_inode and
have it descend into its children updating their uid and gids.
Reset nr_hugepages to zero before the start of the test.
If a non-zero number of hugepages is already set before the start of the
test, the following problems arise:
- The probability of the test getting OOM-killed increases. Proof:
The test wants to run on 80% of available memory to prevent OOM-killing
(see original code comments). Let the value of mem_free at the start
of the test, when nr_hugepages = 0, be x. In the other case, when
nr_hugepages > 0, let the memory consumed by hugepages be y. In the
former case, the test operates on 0.8 * x of memory. In the latter,
the test operates on 0.8 * (x - y) of memory, with y already filled,
hence, memory consumed is y + 0.8 * (x - y) = 0.8 * x + 0.2 * y > 0.8 *
x. Q.E.D
- The probability of a bogus test success increases. Proof: Let the
memory consumed by hugepages be greater than 25% of x, with x and y
defined as above. The definition of compaction_index is c_index = (x -
y)/z where z is the memory consumed by hugepages after trying to
increase them again. In check_compaction(), we set the number of
hugepages to zero, and then increase them back; the probability that
they will be set back to consume at least y amount of memory again is
very high (since there is not much delay between the two attempts of
changing nr_hugepages). Hence, z >= y > (x/4) (by the 25% assumption).
Therefore, c_index = (x - y)/z <= (x - y)/y = x/y - 1 < 4 - 1 = 3
hence, c_index can always be forced to be less than 3, thereby the test
succeeding always. Q.E.D
Link: https://lkml.kernel.org/r/20240521074358.675031-4-dev.jain@arm.com Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory") Signed-off-by: Dev Jain <dev.jain@arm.com> Cc: <stable@vger.kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sri Jayaramappa <sjayaram@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: fb9293b6b015 ("selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation") Signed-off-by: Sasha Levin <sashal@kernel.org>
tl;dr: CPUs with CPUID.80000008H but without CPUID.01H:EDX[CLFSH]
will end up reporting cache_line_size()==0 and bad things happen.
Fill in a default on those to avoid the problem.
Long Story:
The kernel dies a horrible death if c->x86_cache_alignment (aka.
cache_line_size() is 0. Normally, this value is populated from
c->x86_clflush_size.
Right now the code is set up to get c->x86_clflush_size from two
places. First, modern CPUs get it from CPUID. Old CPUs that don't
have leaf 0x80000008 (or CPUID at all) just get some sane defaults
from the kernel in get_cpu_address_sizes().
The vast majority of CPUs that have leaf 0x80000008 also get
->x86_clflush_size from CPUID. But there are oddballs.
Intel Quark CPUs[1] and others[2] have leaf 0x80000008 but don't set
CPUID.01H:EDX[CLFSH], so they skip over filling in ->x86_clflush_size:
So they: land in get_cpu_address_sizes() and see that CPUID has level
0x80000008 and jump into the side of the if() that does not fill in
c->x86_clflush_size. That assigns a 0 to c->x86_cache_alignment, and
hilarity ensues in code like:
To fix this, always provide a sane value for ->x86_clflush_size.
Big thanks to Andy Shevchenko for finding and reporting this and also
providing a first pass at a fix. But his fix was only partial and only
worked on the Quark CPUs. It would not, for instance, have worked on
the QEMU config.
1. https://raw.githubusercontent.com/InstLatx64/InstLatx64/master/GenuineIntel/GenuineIntel0000590_Clanton_03_CPUID.txt
2. You can also get this behavior if you use "-cpu 486,+clzero"
in QEMU.
[ dhansen: remove 'vp_bits_from_cpuid' reference in changelog
because bpetkov brutally murdered it recently. ]
If the socket type is SOCK_STREAM or SOCK_SEQPACKET, unix_release_sock()
checks the length of the peer socket's recvq under unix_state_lock().
However, unix_stream_read_generic() calls skb_unlink() after releasing
the lock. Also, for SOCK_SEQPACKET, __skb_try_recv_datagram() unlinks
skb without unix_state_lock().
Thues, unix_state_lock() does not protect qlen.
Let's use skb_queue_empty_lockless() in unix_release_sock().
Once sk->sk_state is changed to TCP_LISTEN, it never changes.
unix_accept() takes advantage of this characteristics; it does not
hold the listener's unix_state_lock() and only acquires recvq lock
to pop one skb.
It means unix_state_lock() does not prevent the queue length from
changing in unix_stream_connect().
Thus, we need to use unix_recvq_full_lockless() to avoid data-race.
Now we remove unix_recvq_full() as no one uses it.
Note that we can remove READ_ONCE() for sk->sk_max_ack_backlog in
unix_recvq_full_lockless() because of the following reasons:
(1) For SOCK_DGRAM, it is a written-once field in unix_create1()
(2) For SOCK_STREAM and SOCK_SEQPACKET, it is changed under the
listener's unix_state_lock() in unix_listen(), and we hold
the lock in unix_stream_connect()
unix_poll() and unix_dgram_poll() read sk->sk_state locklessly and
calls unix_writable() which also reads sk->sk_state without holding
unix_state_lock().
Let's use READ_ONCE() in unix_poll() and unix_dgram_poll() and pass
it to unix_writable().
While at it, we remove TCP_SYN_SENT check in unix_dgram_poll() as
that state does not exist for AF_UNIX socket since the code was added.
Fixes: 1586a5877db9 ("af_unix: do not report POLLOUT on listeners") Fixes: 3c73419c09a5 ("af_unix: fix 'poll for write'/ connected DGRAM sockets") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a SOCK_DGRAM socket connect()s to another socket, the both sockets'
sk->sk_state are changed to TCP_ESTABLISHED so that we can register them
to BPF SOCKMAP.
When the socket disconnects from the peer by connect(AF_UNSPEC), the state
is set back to TCP_CLOSE.
Then, the peer's state is also set to TCP_CLOSE, but the update is done
locklessly and unconditionally.
Let's say socket A connect()ed to B, B connect()ed to C, and A disconnects
from B.
After the first two connect()s, all three sockets' sk->sk_state are
TCP_ESTABLISHED:
So, when a socket disconnects from the peer, we should not set TCP_CLOSE to
the peer if the peer is connected to yet another socket, and this must be
done under unix_state_lock().
Note that we use WRITE_ONCE() for sk->sk_state as there are many lockless
readers. These data-races will be fixed in the following patches.
Fixes: 83301b5367a9 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
