In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b28c ("intel-hid: new hid event driver for hotkeys") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When writing values to the IOP status/control register make sure those
values do not have any extraneous bits that will clear interrupt flags.
To place the SCC IOP into bypass mode would be desirable but this is not
achieved by writing IOP_DMAINACTIVE | IOP_RUN | IOP_AUTOINC | IOP_BYPASS
to the control register. Drop this ineffective register write.
Remove the flawed and unused iop_bypass() function. Make use of the
unused iop_stop() function.
Avoid this by testing the channel state before calling iop_do_send().
When sending, and iop_send_queue is empty, call iop_do_send() because
the channel is idle. If iop_send_queue is not empty, iop_do_send() will
get called later by iop_handle_send().
Currently we are not initializing the scmi clock with discrete rates
correctly. We fetch the min_rate and max_rate value only for clocks with
ranges and ignore the ones with discrete rates. This will lead to wrong
initialization of rate range when clock supports discrete rate.
Fix this by using the first and the last rate in the sorted list of the
discrete clock rates while registering the clock.
Link: https://lore.kernel.org/r/20200709081705.46084-2-sudeep.holla@arm.com Fixes: 6d6a1d82eaef7 ("clk: add support for clocks provided by SCMI") Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reported-and-tested-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
struct uclamp_rq was zeroed out entirely in assumption that in the first
call to uclamp_rq_inc() they'd be initialized correctly in accordance to
default settings.
But when next patch introduces a static key to skip
uclamp_rq_{inc,dec}() until userspace opts in to use uclamp, schedutil
will fail to perform any frequency changes because the
rq->uclamp[UCLAMP_MAX].value is zeroed at init and stays as such. Which
means all rqs are capped to 0 by default.
Fix it by making sure we do proper initialization at init without
relying on uclamp_rq_inc() doing it later.
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
always-on to fix this hang.
Fixes: 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso") Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some outputs from the RTL8723CS are connected to the PL port (BT_WAKE_AP),
which runs at 1.8V. When BT_WAKE_AP is high, the PL pin this signal is
connected to is overdriven, and the whole PL port's voltage rises
somewhat. This results in changing voltage on the R_PWM pin (PL10),
which is the cause for backlight flickering very noticeably when typing
on a Bluetooth keyboard, because backlight intensity is highly sensitive
to the voltage of the R_PWM pin.
Limit the maximum WiFi/BT I/O voltage to 1.8V to avoid overdriving
the PL port pins via BT and WiFi IO port signals. WiFi and BT
functionality is unaffected by this change.
This completely stops the backlight flicker when using bluetooth.
Fixes: 91f480d40942 ("arm64: dts: allwinner: Add initial support for Pine64 PinePhone") Signed-off-by: Ondrej Jirman <megous@megous.com> Link: https://lore.kernel.org/r/20200703194842.111845-4-megous@megous.com Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is possible that one of the channels cannot be detached
because its free channel is busy and previously queued data
has not been processed yet. On the other hand, another
channel can be successfully detached causing the monitor
work to stop.
Prevent that by rescheduling the monitor work if there are
any channels in the pending state after a detach attempt.
Fixes: 34c881745549e ("rcu: Support kfree_bulk() interface in kfree_rcu()") Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Call exynos_cpu_power_up(cpunr) unconditionally. This is needed by the
big.LITTLE cpuidle driver and has no side-effects on other code paths.
The additional soft-reset call during little core power up has been added
to properly boot all cores on the Exynos5422-based boards with secure
firmware (like Odroid XU3/XU4 family). This however broke big.LITTLE
CPUidle driver, which worked only on boards without secure firmware (like
Peach-Pit/Pi Chromebooks). Apply the workaround only when board is
running under secure firmware.
Fixes: 833b5794e330 ("ARM: EXYNOS: reset Little cores when cpu is up") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The write_tcs_reg_sync() may be called after timekeeping is suspended
so it's not OK to use ktime. The readl_poll_timeout_atomic() macro
implicitly uses ktime. This was causing a warning at suspend time.
Change to just loop 1000000 times with a delay of 1 us between loops.
This may give a timeout of more than 1 second but never less and is
safe even if timekeeping is suspended.
NOTE: I don't have any actual evidence that we need to loop here.
It's possibly that all we really need to do is just read the value
back to ensure that the pipes are cleaned and the looping/comparing is
totally not needed. I never saw the loop being needed in my tests.
However, the loop shouldn't hurt.
Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Fixes: 91160150aba0 ("soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()") Reported-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200528074530.1.Ib86e5b406fe7d16575ae1bb276d650faa144b63c@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash, if you
happen to abuse blktrace while racing to remove / add a device.
We used to use asynchronous removal of the request_queue, and with that
the issue was easier to reproduce. Now that we have reverted to
synchronous removal of the request_queue, the issue is still possible to
reproduce, its however just a bit more difficult.
We essentially run two instances of break-blktrace which add/remove
a loop device, and setup a blktrace and just never tear the blktrace
down. We do this twice in parallel. This is easily reproduced with the
script run_0004.sh from break-blktrace [0].
We can end up with two types of panics each reflecting where we
race, one a failed blktrace setup:
debugfs: Directory 'loop0' with parent 'block' already present
This crash happens because of how blktrace uses the debugfs directory
where it places its files. Upon init we always create the same directory
which would be needed by blktrace but we only do this for make_request
drivers (multiqueue) block drivers. When you race a removal of these
devices with a blktrace setup you end up in a situation where the
make_request recursive debugfs removal will sweep away the blktrace
files and then later blktrace will also try to remove individual
dentries which are already NULL. The inverse is also possible and hence
the two types of use after frees.
We don't create the block debugfs directory on init for these types of
block devices:
* request-based block driver block devices
* every possible partition
* scsi-generic
And so, this race should in theory only be possible with make_request
drivers.
We can fix the UAF by simply re-using the debugfs directory for
make_request drivers (multiqueue) and only creating the ephemeral
directory for the other type of block devices. The new clarifications
on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace
*prior* to processing a blktrace ensures the debugfs directories are
only created if no possible directory name clashes are possible.
This goes tested with:
o nvme partitions
o ISCSI with tgt, and blktracing against scsi-generic with:
o block
o tape
o cdrom
o media changer
o blktests
This patch is part of the work which disputes the severity of
CVE-2019-19770 which shows this issue is not a core debugfs issue, but
a misuse of debugfs within blktace.
Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory") Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: yu kuai <yukuai3@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.
The crypto notify call occurs with a read mutex held so you must
not do any substantial work directly. In particular, you cannot
call crypto_alloc_* as they may trigger further notifications
which may dead-lock in the presence of another writer.
This patch fixes this by postponing the work into a work queue and
taking the same lock in the module init function.
While we're at it this patch also ensures that all RCU accesses are
marked appropriately (tested with sparse).
Finally this also reveals a race condition in module param show
function as it may be called prior to the module init function.
It's fixed by testing whether crct10dif_tfm is NULL (this is true
iff the init function has not completed assuming fallback is false).
Fixes: 11dcb1037f40 ("crc-t10dif: Allow current transform to be...") Fixes: b76377543b73 ("crc-t10dif: Pick better transform if one...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.
Therefore, replace calling kfree() and call kobject_put() and add a
missing kobject_put() in the edac_device_register_sysfs_main_kobj()
error path.
The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
other Rockchip board.
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
gmac fix.
The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
other Rockchip board.
During sched domain init, we check whether non-topological SD_flags are
returned by tl->sd_flags(), if found, fire a waning and correct the
violation, but the code failed to correct the violation. Correct this.
Fixes: 143e1e28cb40 ("sched: Rework sched_domain topology definition") Signed-off-by: Peng Liu <iwtbavbm@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lkml.kernel.org/r/20200609150936.GA13060@iZj6chx1xj0e0buvshuecpZ Signed-off-by: Sasha Levin <sashal@kernel.org>
With commit:
'b7031a02ec75 ("sched/fair: Add NOHZ_STATS_KICK")'
rebalance_domains of the local cfs_rq happens before others idle cpus have
updated nohz.next_balance and its value is overwritten.
Move the update of nohz.next_balance for other idles cpus before balancing
and updating the next_balance of local cfs_rq.
Also, the nohz.next_balance is now updated only if all idle cpus got a
chance to rebalance their domains and the idle balance has not been aborted
because of new activities on the CPU. In case of need_resched, the idle
load balance will be kick the next jiffie in order to address remaining
ilb.
Be defensive against the case where the processor reports a base_freq
larger than turbo_freq (the ratio would be zero).
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance") Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/20200531182453.15254-4-ggherdovich@suse.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
There may be CPUs that support turbo boost but don't declare any turbo
ratio, i.e. their MSR_TURBO_RATIO_LIMIT is all zeroes. In that condition
scale-invariant calculations can't be performed.
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance") Suggested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Link: https://lkml.kernel.org/r/20200531182453.15254-3-ggherdovich@suse.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
The product mcnt * arch_max_freq_ratio can overflows u64.
For context, a large value for arch_max_freq_ratio would be 5000,
corresponding to a turbo_freq/base_freq ratio of 5 (normally it's more like
1500-2000). A large increment frequency for the MPERF counter would be 5GHz
(the base clock of all CPUs on the market today is less than that). With
these figures, a CPU would need to go without a scheduler tick for around 8
days for the u64 overflow to happen. It is unlikely, but the check is
warranted.
Under similar conditions, the difference acnt of two consecutive APERF
readings can overflow as well.
In these circumstances is appropriate to disable frequency invariant
accounting: the feature relies on measures of the clock frequency done at
every scheduler tick, which need to be "fresh" to be at all meaningful.
A note on i386: prior to version 5.1, the GCC compiler didn't have the
builtin function __builtin_mul_overflow. In these GCC versions the macro
check_mul_overflow needs __udivdi3() to do (u64)a/b, which the kernel
doesn't provide. For this reason this change fails to build on i386 if
GCC<5.1, and we protect the entire frequency invariant code behind
CONFIG_X86_64 (special thanks to "kbuild test robot" <lkp@intel.com>).
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance") Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/20200531182453.15254-2-ggherdovich@suse.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
When counting IMC uncore events on some TGL machines, an oops will be
triggered.
[ 393.101262] BUG: unable to handle page fault for address: ffffb45200e15858
[ 393.101269] #PF: supervisor read access in kernel mode
[ 393.101271] #PF: error_code(0x0000) - not-present page
Current perf uncore driver still use the IMC MAP SIZE inherited from
SNB, which is 0x6000.
However, the offset of IMC uncore counters is larger than 0x6000,
e.g. 0xd8a0.
Enlarge the IMC MAP SIZE for TGL to 0xe000.
Fixes: fdb64822443e ("perf/x86: Add Intel Tiger Lake uncore support") Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Chao Qin <chao.qin@intel.com> Link: https://lkml.kernel.org/r/1590679169-61823-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Some devices, particularly the 3DConnexion Spacemouse wireless 3D
controllers, return more than just the battery capacity in the battery
report. The Spacemouse devices return an additional byte with a device
specific field. However, hidinput_query_battery_capacity() only
requests a 2 byte transfer.
When a spacemouse is connected via USB (direct wire, no wireless dongle)
and it returns a 3 byte report instead of the assumed 2 byte battery
report the larger transfer confuses and frightens the USB subsystem
which chooses to ignore the transfer. Then after 2 seconds assume the
device has stopped responding and reset it. This can be reproduced
easily by using a wired connection with a wireless spacemouse. The
Spacemouse will enter a loop of resetting every 2 seconds which can be
observed in dmesg.
This patch solves the problem by increasing the transfer request to 4
bytes instead of 2. The fix isn't particularly elegant, but it is simple
and safe to backport to stable kernels. A further patch will follow to
more elegantly handle battery reports that contain additional data.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Darren Hart <darren@dvhart.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Tested-by: Darren Hart <dvhart@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide a helper to run task_work instead of checking and running
manually in a bunch of different spots. While doing so, also move the
task run state setting where we run the task work. Then we can move it
out of the callback helpers. This also helps ensure we only do this once
per task_work list run, not per task_work item.
Direct stderr to subprocess.STDOUT so error messages get included in the
subprocess.CalledProcessError exceptions output field. This results in
more meaningful error messages for the user.
This is already being done in the make_allyesconfig method. Do the same
for make_mrproper, make_olddefconfig, and make methods.
With this, failures on unclean trees [1] will give users an error
message that includes:
"The source tree is not clean, please run 'make ARCH=um mrproper'"
__tracepoint_string's have their string data stored in .rodata, and an
address to that data stored in the "__tracepoint_str" section. Functions
that refer to those strings refer to the symbol of the address. Compiler
optimization can replace those address references with references
directly to the string data. If the address doesn't appear to have other
uses, then it appears dead to the compiler and is removed. This can
break the /tracing/printk_formats sysfs node which iterates the
addresses stored in the "__tracepoint_str" section.
Like other strings stored in custom sections in this header, mark these
__used to inform the compiler that there are other non-obvious users of
the address, so they should still be emitted.
Link: https://lkml.kernel.org/r/20200730224555.2142154-2-ndesaulniers@google.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: stable@vger.kernel.org Fixes: 102c9323c35a8 ("tracing: Add __tracepoint_string() to export string pointers") Reported-by: Tim Murray <timmurray@google.com> Reported-by: Simon MacMullen <simonmacm@google.com> Suggested-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 585524081ecd ("random: random.h should include archrandom.h, not
the other way around") tries to fix a problem with recursive inclusion
of linux/random.h and arch/archrandom.h for arm64. Unfortunately, this
results in the following compile error if ARCH_RANDOM is disabled.
arch/arm64/kernel/kaslr.c: In function 'kaslr_early_init':
arch/arm64/kernel/kaslr.c:128:6: error: implicit declaration of function '__early_cpu_has_rndr'; did you mean '__early_pfn_to_nid'? [-Werror=implicit-function-declaration]
if (__early_cpu_has_rndr()) {
^~~~~~~~~~~~~~~~~~~~
__early_pfn_to_nid
arch/arm64/kernel/kaslr.c:131:7: error: implicit declaration of function '__arm64_rndr' [-Werror=implicit-function-declaration]
if (__arm64_rndr(&raw))
^~~~~~~~~~~~
The problem is that arch/archrandom.h is only included from
linux/random.h if ARCH_RANDOM is enabled. If not, __arm64_rndr() and
__early_cpu_has_rndr() are undeclared, causing the problem.
Use arch_get_random_seed_long_early() instead of arm64 specific
functions to solve the problem.
Reported-by: Qian Cai <cai@lca.pw> Fixes: 585524081ecd ("random: random.h should include archrandom.h, not the other way around") Cc: Qian Cai <cai@lca.pw> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The addition of percpu.h to the list of includes in random.h revealed
some circular dependencies on arm64 and possibly other platforms. This
include was added solely for the pseudo-random definitions, which have
nothing to do with the rest of the definitions in this file but are
still there for legacy reasons.
This patch moves the pseudo-random parts to linux/prandom.h and the
percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and
protected against recursive inclusion.
A further cleanup step would be to remove this from <linux/random.h>
entirely, and make people who use the prandom infrastructure include
just the new header file. That's a bit of a churn patch, but grepping
for "prandom_" and "next_pseudo_random32" "struct rnd_state" should
catch most users.
But it turns out that that nice cleanup step is fairly painful, because
a _lot_ of code currently seems to depend on the implicit include of
<linux/random.h>, which can currently come in a lot of ways, including
such fairly core headfers as <linux/net.h>.
So the "nice cleanup" part may or may never happen.
Fixes: 1c9df907da83 ("random: fix circular include dependency on arm64 after addition of percpu.h") Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise="
modes - log, fix, enforce - at run time, but not when IMA architecture
specific policies are enabled. Â This prevents properly labeling the
filesystem on systems where secure boot is supported, but not enabled on the
platform. Â Only when secure boot is actually enabled should these IMA
appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime
decision, based on the secure boot state of that platform.
After that, the ethernet NIC is not functional anymore even after
reloading the r8169 module. After a reboot, this is reproducible by
copying a large file over the NIC to the MMC.
For some reason this is not reproducible when files are copied to a tmpfs.
* Little background on the fixup, by Manikanta Maddireddy:
"In the internal testing with dGPU on Tegra124, CmplTO is reported by
dGPU. This happened because FIFO queue in AFI(AXI to PCIe) module
get full by upstream posted writes. Back to back upstream writes
interleaved with infrequent reads, triggers RAW violation and CmpltTO.
This is fixed by reducing the posted write credits and by changing
updateFC timer frequency. These settings are fixed after stress test.
In the current case, RTL NIC is also reporting CmplTO. These settings
seems to be aggravating the issue instead of fixing it."
Link: https://lore.kernel.org/r/20200718100710.15398-1-kwizart@gmail.com Fixes: 191cd6fb5d2c ("PCI: tegra: Add SW fixup for RAW violations") Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doing kasan pages allocation in MMU_init is too early, kernel doesn't
have access yet to the entire memory space and memblock_alloc() fails
when the kernel is a bit big.
This commit moved too much work in kasan_init(). The allocation
of shadow pages has to be moved for the reason explained in that
patch, but the allocation of page tables still need to be done
before switching to the final hash table.
First revert the incorrect commit, following patch redoes it
properly.
set/removexattr on an exported filesystem should break NFS delegations.
This is true in general, but also for the upcoming support for
RFC 8726 (NFSv4 extended attribute support). Make sure that they do.
Additionally, they need to grow a _locked variant, since callers might
call this with i_rwsem held (like the NFS server code).
Cc: stable@vger.kernel.org # v4.9+ Cc: linux-fsdevel@vger.kernel.org Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 375446df95ee ("leds: 88pm860x: Use devm_led_classdev_register") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 50154e29e5cc ("leds: lm3533: Use devm_led_classdev_register") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: eed16255d66b ("leds: da903x: Use devm_led_classdev_register") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot use devres so that
deregistration ends up being tied to the parent device, something which
leads to use-after-free on driver unbind when the class device is
released while still being registered.
Fixes: 11e1bbc116a7 ("leds: lm36274: Introduce the TI LM36274 LED driver") Cc: stable <stable@vger.kernel.org> # 5.3 Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 8d3b6a4001ce ("leds: wm831x-status: Use devm_led_classdev_register") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When doing a "write" ioctl call, properly check that we have permissions
to do so before copying anything from userspace or anything else so we
can "fail fast". This includes also covering the MEMWRITE ioctl which
previously missed checking for this.
vgacon_scrollback_update() always leaves enbough room in the scrollback
buffer for the next call, but if the console size changed that room
might not actually be enough, and so we need to re-check.
The check should be in the loop since vgacon_scrollback_cur->tail is
updated in the loop and count may be more than 1 when triggered by CSI M,
as Jiri's PoC:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <fcntl.h>
int main(int argc, char** argv)
{
int fd = open("/dev/tty1", O_RDWR);
unsigned short size[3] = {25, 200, 0};
ioctl(fd, 0x5609, size); // VT_RESIZE
write(fd, "\e[1;1H", 6);
for (int i = 0; i < 30; i++)
write(fd, "\e[10M", 5);
}
It leads to various crashes as vgacon_scrollback_update writes out of
the buffer:
BUG: unable to handle page fault for address: ffffc900001752a0
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:mutex_unlock+0x13/0x30
...
Call Trace:
n_tty_write+0x1a0/0x4d0
tty_write+0x1a0/0x2e0
Or to KASAN reports:
BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed
This fixes CVE-2020-14331.
Reported-by: å¼ äº‘æµ· <zhangyunhai@nsfocus.com> Reported-by: Yang Yingliang <yangyingliang@huawei.com> Reported-by: Kyungtae Kim <kt0755@gmail.com> Fixes: 15bdab959c9b ([PATCH] vgacon: Add support for soft scrollback) Cc: stable@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Solar Designer <solar@openwall.com> Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu> Cc: Anthony Liguori <aliguori@amazon.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Yunhai Zhang <zhangyunhai@nsfocus.com> Link: https://lore.kernel.org/r/9fb43895-ca91-9b07-ebfd-808cf854ca95@nsfocus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Har har, after I moved the slab freelist pointer into the middle of the
slab, now it looks like the contents are getting poisoned. Adjust the
test to avoid the freelist pointer again.
When running `make coccicheck` in report mode using the
add_namespace.cocci file, it will fail for files that contain
MODULE_LICENSE. Those match the replacement precondition, but spatch
errors out as virtual.ns is not set.
In order to fix that, add the virtual rule nsdeps and only do search and
replace if that rule has been explicitly requested.
In order to make spatch happy in report mode, we also need a dummy rule,
as otherwise it errors out with "No rules apply". Using a script:python
rule appears unrelated and odd, but this is the shortest I could come up
with.
Adjust scripts/nsdeps accordingly to set the nsdeps rule when run trough
`make nsdeps`.
smk_write_relabel_self() frees memory from the task's credentials with
no locking, which can easily cause a use-after-free because multiple
tasks can share the same credentials structure.
Fix this by using prepare_creds() and commit_creds() to correctly modify
the task's credentials.
Reproducer for "BUG: KASAN: use-after-free in smk_write_relabel_self":
Binder is designed such that a binder_proc never has references to
itself. If this rule is violated, memory corruption can occur when a
process sends a transaction to itself; see e.g.
<https://syzkaller.appspot.com/bug?extid=09e05aba06723a94d43d>.
There is a remaining edgecase through which such a transaction-to-self
can still occur from the context of a task with BINDER_SET_CONTEXT_MGR
access:
- task A opens /dev/binder twice, creating binder_proc instances P1
and P2
- P1 becomes context manager
- P2 calls ACQUIRE on the magic handle 0, allocating index 0 in its
handle table
- P1 dies (by closing the /dev/binder fd and waiting a bit)
- P2 becomes context manager
- P2 calls ACQUIRE on the magic handle 0, allocating index 1 in its
handle table
[this triggers a warning: "binder: 1974:1974 tried to acquire
reference to desc 0, got 1 instead"]
- task B opens /dev/binder once, creating binder_proc instance P3
- P3 calls P2 (via magic handle 0) with (void*)1 as argument (two-way
transaction)
- P2 receives the handle and uses it to call P3 (two-way transaction)
- P3 calls P2 (via magic handle 0) (two-way transaction)
- P2 calls P2 (via handle 1) (two-way transaction)
And then, if P2 does *NOT* accept the incoming transaction work, but
instead closes the binder fd, we get a crash.
Solve it by preventing the context manager from using ACQUIRE on ref 0.
There shouldn't be any legitimate reason for the context manager to do
that.
Additionally, print a warning if someone manages to find another way to
trigger a transaction-to-self bug in the future.
The drm/omap driver was fixed to correct an issue where using a
divider of 32 breaks the DSS despite the TRM stating 32 is a valid
number. Through experimentation, it appears that 31 works, and
it is consistent with the value used by the drm/omap driver.
This patch fixes the divider for fbdev driver instead of the drm.
Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb") Cc: <stable@vger.kernel.org> #4.5+ Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Rob Clark <robdclark@gmail.com>
[b.zolnierkie: mark patch as applicable to stable 4.5+ (was 4.9+)] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630182636.439015-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check upon `num_rsp` is insufficient. A malformed event packet with a
large `num_rsp` number makes hci_extended_inquiry_result_evt() go out
of bounds. Fix it.
The variable authmode can be uninitialized. The danger would be if
it equals to _WPA_IE_ID_ (0xdd) or _WPA2_IE_ID_ (0x33). We can avoid
this by setting it to zero instead. This is the approach that was
used in the rtl8723bs driver.
Fixes: 7b464c9fa5cc ("staging: r8188eu: Add files for new driver - part 4") Co-developed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200728072153.9202-1-dinghao.liu@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when firmware fails to load we should not call unregister_netdev()
this patch fixes a race condition between rtl871x_load_fw_cb() and
r871xu_dev_remove() and fixes the bug reported by syzbot
syzbot report [1] describes a deadlock when write operation against an
ashmem fd executed at the time when ashmem is shrinking its cache results
in the following lock sequence:
kswapd takes fs_reclaim and then inode_lock while generic_perform_write
takes inode_lock and then fs_reclaim. However ashmem does not support
writing into backing shmem with a write syscall. The only way to change
its content is to mmap it and operate on mapped memory. Therefore the race
that lockdep is warning about is not valid. Resolve this by introducing a
separate lockdep class for the backing shmem inodes.
Some ioctls via OSS sequencer API may race and lead to UAF when the
port create and delete are performed concurrently, as spotted by a
couple of syzkaller cases. This patch is an attempt to address it by
serializing the ioctls with the existing register_mutex.
Basically OSS sequencer API is an obsoleted interface and was designed
without much consideration of the concurrency. There are very few
applications with it, and the concurrent performance isn't asked,
hence this "big hammer" approach should be good enough.
When the ZxR headphone gain control was added, the ca0132_switch_get
function was not updated, which meant that the changes to the control
state were not saved when entering/exiting alsamixer.
There are several Loongson-3 based laptops produced by CZC or Lemote,
they use alc269/alc662 codecs and need specific pin-tables, this patch
add their pin-tables.
This reverts commit 9a6418487b56 ("ALSA: hda: call runtime_allow()
for all hda controllers").
The reverted patch already introduced some regressions on some
machines:
- on gemini-lake machines, the error of "azx_get_response timeout"
happens in the hda driver.
- on the machines with alc662 codec, the audio jack detection doesn't
work anymore.
I've confirmed that the ASMedia ASM1142 has the same problem as the
ASM2142/ASM3142, in that it too reports that it supports 64-bit DMA
addresses when in fact it does not. As with the ASM2142/ASM3142, this
can cause problems on systems where the upper bits matter, and adding
the XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue.
Not all ASMedia host controllers have a device ID that matches its part
number. #define some of these IDs to make it clearer at a glance which
chips require what quirks.
In previous patches that added support for new iowarrior devices, the
handling of the report size was not done correct.
Fix that up and update the copyright date for the driver
Reworked from an original patch written by Christoph Jung.
Fixes: bab5417f5f01 ("USB: misc: iowarrior: add support for the 100 device") Fixes: 5f6f8da2d7b5 ("USB: misc: iowarrior: add support for the 28 and 28L devices") Fixes: 461d8deb26a7 ("USB: misc: iowarrior: add support for 2 OEMed devices") Cc: stable <stable@kernel.org> Reported-by: Christoph Jung <jung@codemercs.com> Link: https://lore.kernel.org/r/20200726094939.1268978-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba
laptop, it changed product ID to 0x9062 when entering QDL mode:
usb 2-4: new high-speed USB device number 78 using xhci_hcd
usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: EM7305
usb 2-4: Manufacturer: Sierra Wireless, Incorporated
The upgrade could complete after running
# echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id
qcserial 2-4:1.0: Qualcomm USB modem converter detected
usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0
Add missing setup_xfer_req() call in ufshcd_issue_devman_upiu_cmd() in
ufs-bsg path. Relocate existing setup_xfer_req() calls to a common place,
i.e., ufshcd_send_command(), to simplify the driver.
Link: https://lore.kernel.org/r/20200706060707.32608-3-stanley.chu@mediatek.com Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 2 Aug 2020 18:23:51 +0000 (11:23 -0700)]
Merge tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- clean the generated moc file for xconfig
- fix xconfig bugs, and revert some bad commits
* tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove redundant FORCE definition in scripts/Makefile.modpost
kconfig: qconf: remove wrong ConfigList::firstChild()
Revert "kconfig: qconf: don't show goback button on splitMode"
Revert "kconfig: qconf: Change title for the item window"
kconfig: qconf: remove "goBack" debug message
kconfig: qconf: use delete[] instead of delete to free array
kconfig: qconf: compile moc object separately
kconfig: qconf: use if_changed for qconf.moc rule
modpost: explain why we can't use strsep
Linus Torvalds [Sun, 2 Aug 2020 17:41:00 +0000 (10:41 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and strengthening the validity checks on inputs from new
userspace APIs.
Now I know why I shouldn't prepare pull requests on the weekend, it's
hard to concentrate if your son is shouting about his latest Minecraft
builds in your ear. Fortunately all the patches were ready and I just
had to check the test results..."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM
KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
KVM: arm64: Don't inherit exec permission across page-table levels
KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions
KVM: nVMX: check for invalid hdr.vmx.flags
KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE
selftests: kvm: do not set guest mode flag
This function returns the first child object, but the returned pointer
is not compatible with (ConfigItem *).
Commit cc1c08edccaf ("kconfig: qconf: don't show goback button on
splitMode") uncovered this issue because using the pointer from this
function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411)
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
Linus Torvalds [Sat, 1 Aug 2020 20:08:50 +0000 (13:08 -0700)]
Merge tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Fix libtraceevent build with binutils 2.35
- Fix memory leak in process_dynamic_array_len in libtraceevent
- Fix 'perf test 68' zstd compression for s390
- Fix record failure when mixed with ARM SPE event
* tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
libtraceevent: Fix build with binutils 2.35
perf tools: Fix record failure when mixed with ARM SPE event
perf tests: Fix test 68 zstd compression for s390
tools lib traceevent: Fix memory leak in process_dynamic_array_len
Taehee Yoo [Sat, 1 Aug 2020 07:07:50 +0000 (07:07 +0000)]
vxlan: fix memleak of fdb
When vxlan interface is deleted, all fdbs are deleted by vxlan_flush().
vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains
all-zeros-mac because it is deleted by vxlan_uninit().
But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac
and default vni.
So, the fdb, which contains both all-zeros-mac and non-default vni
will not be deleted.
Test commands:
ip link add vxlan0 type vxlan dstport 4789 external
ip link set vxlan0 up
bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \
src_vni 10000 self permanent
ip link del vxlan0
Fixes: 3ad7a4b141eb ("vxlan: support fdb and learning in COLLECT_METADATA mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 1 Aug 2020 17:11:42 +0000 (10:11 -0700)]
Merge tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single last minute pin control fix to the Qualcomm driver fixing
missing dual edge PCH interrupts"
* tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180
Maxim Levitsky reports 'make xconfig' crashes since that commit
(https://lkml.org/lkml/2020/7/18/411)
Or, the following is simple test code that makes it crash:
menu "Menu"
config FOO
bool "foo"
default y
menuconfig BAR
bool "bar"
depends on FOO
endmenu
Select the Split View mode, and double-click "bar" in the right
window, then you will see Segmentation fault.
When 'last' is not set for symbolMode, the following code in
ConfigList::updateList() calls firstChild().
item = last ? last->nextSibling() : firstChild();
However, the pointer returned by ConfigList::firstChild() does not
seem to be compatible with (ConfigItem *), which seems another bug.
I'd rather want to reconsider whether hiding the goback icon is the
right thing to do.
In the following test code, the Split View shows "Menu2" and "Menu3"
in the right window. You can descend into "Menu3", but there is no way
to ascend back to "Menu2" from "Menu3".
menu "Menu1"
config FOO
bool "foo"
default y
menu "Menu2"
depends on FOO
menu "Menu3"
config BAZ
bool "baz"
endmenu
endmenu
endmenu
It is true that the goback button is currently not functional due to
yet another bug, but hiding the problem is not the right way to go.
Anyway, Segmentation fault is fatal. Revert the offending commit for
now, and we should find the right solution.
The change to ConfigList::updateSelection() is strange too.
When you click the split view icon for the first time, the titles in
both windows show "Option". After you click something in the right
window, the title suddenly changes to "Item".
ConfigList::updateSelection() is not the right place to do this,
at least. It was not a good idea, I think.
Regenerate qconf.moc when the moc command is changed.
This also allows 'make mrproper' to clean it up. Previously, it was
not cleaned up because 'clean-files += qconf.moc' was missing.
Now 'make mrproper' correctly cleans it up because files listed in
'targets' are cleaned.
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).
The main changes are:
1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.
2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
btf_vmlinux is available, from Peilin Ye.
3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.
4) Fix a cgroup sockopt verifier test by specifying expected attach type,
from Jean-Philippe Brucker.
Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb7feb ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a0511c7 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.
Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:
int btf_resolve_helper_id(struct bpf_verifier_log *log,
const struct bpf_func_proto *fn, int arg)
{
int id;
if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
return -EINVAL;
id = fn->btf_id[arg];
if (!id || id > btf_vmlinux->nr_types)
return -EINVAL;
return id;
}
Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Fix policy matching with mark and mask on userspace interfaces.
From Xin Long.
2) Several fixes for the new ESP in TCP encapsulation.
From Sabrina Dubroca.
3) Fix crash when the hold queue is used. The assumption that
xdst->path and dst->child are not a NULL pointer only if dst->xfrm
is not a NULL pointer is true with the exception of using the
hold queue. Fix this by checking for hold queue usage before
dereferencing xdst->path or dst->child.
4) Validate pfkey_dump parameter before sending them.
From Mark Salyzyn.
5) Fix the location of the transport header with ESP in UDPv6
encapsulation. From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Peilin Ye [Thu, 30 Jul 2020 19:20:26 +0000 (15:20 -0400)]
rds: Prevent kernel-infoleak in rds_notify_queue_get()
rds_notify_queue_get() is potentially copying uninitialized kernel stack
memory to userspace since the compiler may leave a 4-byte hole at the end
of `cmsg`.
In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which
unfortunately does not always initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org Fixes: f037590fff30 ("rds: fix a leak of kernel memory") Fixes: bdbe6fbc6a2f ("RDS: recv.c") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/sched: The error lable position is corrected in ct_init_module
Exchange the positions of the err_tbl_init and err_register labels in
ct_init_module function.
Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: liujian <liujian56@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some I2C core improvements to prevent NULL pointer usage and a
MAINTAINERS update"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: slave: add sanity check when unregistering
i2c: slave: improve sanity check when registering
MAINTAINERS: Update GENI I2C maintainers list
i2c: also convert placeholder function to return errno
Merge tag 'powerpc-5.8-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Fix a bug introduced by the changes we made to lockless page table
walking this cycle.
When using the hash MMU, and perf with callchain recording, we can
deadlock if the PMI interrupts a hash fault, and the callchain
recording then takes a hash fault on the same page.
Thanks to Nicholas Piggin, Aneesh Kumar K.V, Anton Blanchard, and
Athira Rajeev"
* tag 'powerpc-5.8-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/hash: Fix hash_preload running with interrupts enabled
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main one is to fix the build after Willy's per-cpu entropy changes
this week. Although that was already resolved elsewhere, the arm64 fix
here is useful cleanup anyway.
Other than that, we've got a fix for building with Clang's integrated
assembler and a fix to make our IPv4 checksumming robust against
invalid header lengths (this only seems to be triggerable by injected
errors).
- Fix build breakage due to circular headers
- Fix build regression when using Clang's integrated assembler
- Fix IPv4 header checksum code to deal with invalid length field
- Fix broken path for Arm PMU entry in MAINTAINERS"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
MAINTAINERS: Include drivers subdirs for ARM PMU PROFILING AND DEBUGGING entry
arm64: csum: Fix handling of bad packets
arm64: Drop unnecessary include from asm/smp.h
arm64/alternatives: move length validation inside the subsection
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- avoid invoking overflow handler for uaccess watchpoints
- fix incorrect clock_gettime64 availability
- fix EFI crash in create_mapping_late()
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8988/1: mmu: fix crash in EFI calls due to p4d typo in create_mapping_late()
ARM: 8987/1: VDSO: Fix incorrect clock_gettime64
ARM: 8986/1: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
projects / thirdparty / kernel / stable.git / log
