u-boot attempts to build a Python library called pylibfdt. By default,
u-boot would attempt to use the build host's Python interpreter, which
causes numerous problems, not least of which is that it fails if the
host doesn't have the Python development package installed (complaining
about not being able to find Python.h)
Rectify this situation by including the proper build time dependencies
for pylibfdt and passing the proper arguments to make.
Ross Burton [Tue, 31 Jul 2018 17:05:41 +0000 (18:05 +0100)]
python[3]native: allow use of both native Python 2 and 3
Instead of both classes using ${PYTHON_PN} (which is set by python-dir and
python3-dir), hardcode the right values so that it is possible to inherit both
pythonnative and python3native at the same time.
If both are inherited then both native Pythons are available, but the last to be
inherited will be the one to set PYTHON.
Ross Burton [Tue, 31 Jul 2018 17:05:40 +0000 (18:05 +0100)]
meson: don't dump full error log on failure
If the configure fails then we don't really want to see hundreds of lines of
test output (this would be similar to dumping out autoconf's config.log). The
error includes the path of the full log if further debugging is required.
Andre McCurdy [Tue, 31 Jul 2018 13:57:56 +0000 (06:57 -0700)]
openssl: fix missing dependency on hostperl-runtime-native
Openssl 1.1 requires perl in order to build (just as openssl 1.0
does). The missing dependency has gone unnoticed up to now since
hostperl-runtime-native is included in ASSUME_PROVIDED.
Yi Zhao [Wed, 1 Aug 2018 06:46:38 +0000 (14:46 +0800)]
sudo: add PACKAGECONFIG for pam-wheel
The pam_wheel PAM module is used to enforce the so-called wheel group.
By default it permits root access to the system if the applicant user is
a member of the wheel group.
Add PACKAGECONFIG to enable pam_wheel module for sudo.
Richard Purdie [Tue, 31 Jul 2018 12:43:54 +0000 (12:43 +0000)]
bitbake: bblayers: Don't parse all recipes when calling add-layer
When adding multiple layers in a chain of commands, reparsing all recipes
each time can be painfully slow. Instead just parse the base configuration
which gives some confidence things worked out correctly without as much
overhead.
For the sake of simplicity consider the following example:
Assuming we have set up multiconfig builds, one for qemux86 and one for
qemuarm, named x86 and arm respectively.
Adding the following line to an image recipe (core-image-sato):
do_image[mcdepends] = "multiconfig:x86:arm:core-image-minimal:do_rootfs"
Would state that core-image-sato:do_image from x86 will depend on
core-image-minimal:do_rootfs from arm so it can be executed.
This patch makes modifications to:
- cooker: To glue both multiconfigs in one place and make sure
the dependencies can be provided.
- taskdata: To parse and add a new kind of dependency (mcdepends) to
the taskdata object.
- runqueue: To differentiate tasks from different multiconfigs,
add the specified dependencies to the corresponding tasks, and
create a working runqueue that contains tasks from both multiconfigs.
- siggen: To avoid looking for tasks from different multiconfigs on
objects where they dont belong.
The taskdata objects are still not aware of the concept of multiconfig,
so each object doesnt know which multiconfig its building, hence why
the mcdepends are added to all taskdata objects equally (we really
dont expect many of these), but the actual dependencies are added only
to the required tasks by the runqueue.
util-linux.inc: add fallocate only for class-target
Because the util-linux_2.32.bb recipe explicitely disables fallocate
for nativesdk triggering build warnings:
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux:
alternative target (sdk/usr/bin/fallocate or sdk/usr/bin/fallocate.util-linux)
does not exist, skipping...
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: NOT adding
alternative provide sdk/usr/bin/fallocate: sdk/usr/bin/fallocate.util-linux
does not exist
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: alt_link ==
alt_target: sdk/usr/bin/fallocate == sdk/usr/bin/fallocate
For the sake of simplicity consider the following example:
Assuming we have set up multiconfig builds, one for qemux86 and one for
qemuarm, named x86 and arm respectively.
Adding the following line to an image recipe (core-image-sato):
do_image[mcdepends] = "multiconfig:x86:arm:core-image-minimal:do_rootfs"
Would state that core-image-sato:do_image from x86 will depend on
core-image-minimal:do_rootfs from arm so it can be executed.
This patch makes modifications to bitbake.conf to enable mcdepends, and
to sstatesig and staging.bbclass to avoid conflicts between packages from
different multiconfigs.
Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 26 Jul 2018 14:27:44 +0000 (16:27 +0200)]
oe-selftest: devtool: avoid parallel races by using temporary copy of core
Some of the devtool tests make changes to files under meta/ -
legitimately since we want these tests to be working with real recipes
and associated files. Unfortunately with the new oe-selftest
parallelisation this can break other tests if files go missing at the
wrong time (among other scenarios). To avoid this issue, simply take a
copy of the core repository and use that for these tests. (We copy the
entire repository since changing the path of meta/ influences COREBASE
and thus we need to have things like scripts/ alongside as well).
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yongxin Liu [Mon, 30 Jul 2018 09:16:32 +0000 (17:16 +0800)]
kdump: start kdump.service after basic.target
If kdump.service is set to run on boot and dump-capture kernel isn't
placed in /dev/root, kdump.service will fail to load the kernel,
since other partitions are not mounted yet. Starting kdump.service
after basic.target guarantees dump-capture kernel can be loaded in
this situation.
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
parselogs.py: ignore network interface name changing failure
The following error from systemd-udevd is not harmful. It's just
because our qemu targets are using eth0.
Error changing net interface name 'eth0' to 'enp0s3': Device or resource busy
Note that systemd is using a different network interface naming scheme
from traditional ethX naming scheme. To make this error message go away,
we could symlink /etc/udev/rules.d/80-net-setup-link.rules to /dev/null
to recover traditional naming scheme. But I'm not sure if this will
cause regression in user experience for systemd users of OE.
So just ignore this error message so that parselogs.py test case does not
fail.
oe_syslog.py: fix settings in OEHasPackage decorator
1. For test_syslog_running, we should not restrict it to run for
only busybox-syslog and sysklogd. So extend it to all syslog
providers in oe-core and meta-openembedded.
2. For test_syslog_startup_config, fix to make it depend on the
existence of busybox-syslog. The previous condition "!sysklogd
&& busybox" is incorrect, because busybox may be compiled without
syslog support, and sysklogd and busybox-syslog conflict with
each other.
Richard Purdie [Mon, 30 Jul 2018 23:02:23 +0000 (23:02 +0000)]
package.bbclass: Fix hardlink preservation issue
Recent changes broke the preservation of hardlinks during processing due to a missing index.
Fix this, reducing the size of the git recipe packages in particular (it contains many hardlinks).
Richard Purdie [Mon, 30 Jul 2018 17:00:01 +0000 (17:00 +0000)]
libtool: Fix problem with libtoolize in multilib installations
Without this patch /usr/bin/libtoolize is different for each multilib
since their host-triplets are different, despite there being no difference in
the functionality of libtoolize itself.
This change just patches out the problematic line since its just a comment for the user
in help text. Ugly but solves the problem. This fixes issues where libtool and
libXX-libtool couldn't be installed into the same system.
Richard Purdie [Mon, 30 Jul 2018 13:09:29 +0000 (13:09 +0000)]
multilib_script: Add support for multilib scripts
Whilst the package managers handle multilib ELF binaries well, they don't
handle scripts in the *bindir directories well. This adds support for
marking these up so that they can be handled using update-alternatives.
Its done this way so that non-multilib systems don't see any changes and
there is standardisation amongst the multilibs on how the alternatives are
named and prioritiesd. The priotitisation code needs to be added but this
change means there is somewhere to add it.
Recipe needs to set MULTILIB_SCRIPTS in the form <pkgname>:<scriptname>, e.g.
MULTILIB_SCRIPTS = "${PN}-dev:${bindir}/file1 ${PN}:${base_bindir}/file2"
to indicate which script files to process from which packages.
libtool is used a as a reference to stop the libtool scripts conflicting
in a multilib case and allows the kernel-devsrc change to be merged.
* base_conditional was already removed from oe-core:
http://git.openembedded.org/openembedded-core/commit/?id=0391fcad9103abca0796a068f957d0df63ab4776
after the usage was migrated to oe.utils.conditional:
http://git.openembedded.org/openembedded-core/commit/?id=c97acbd034532895ce57c6717ed1b3ccc7900b0d
so we can handle just ".conditional" version
* add 1st parameter to variable dependencies, that way when you use
FOO = "${@oe.utils.conditional('VAR', 'VALUE', 'true', 'false')"
FOO variable will have dependency on VAR variable and you don't need
to add FOO[vardeps] += "VAR" manually every time you use
oe.utils.conditional
* this is similar to contains tracking from:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=3890
http://git.openembedded.org/bitbake/commit/?id=ed2d0a22a80299de0cfd377999950cf4b26c512e
http://git.openembedded.org/bitbake/commit/?id=0b9d117631ce909312d53b93289e61defc6be01c
but conditional is simpler, we don't need to handle the first
parameter as a set
Paul Eggleton [Thu, 26 Jul 2018 14:24:21 +0000 (16:24 +0200)]
bitbake: utils: add optional callback to edit_bblayers_conf()
Add a callback that lets you modify or remove items in addition to the
current scheme where you can only add or remove. This enables you to for
example replace a layer with a temporary copy (which is what we will use
this for first in OE's oe-selftest).
Andre McCurdy [Sat, 28 Jul 2018 20:39:23 +0000 (13:39 -0700)]
openssl_1.0: squash whitespace in CC_INFO
Squash whitespace in CC_INFO to avoid recipe whitespace changes to
CFLAG affecting the final openssl binaries (the value of CC_INFO gets
embedded in libcrypto, via buildinf.h).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Sat, 28 Jul 2018 20:39:22 +0000 (13:39 -0700)]
openssl_1.0: add PACKAGECONFIG option to control manpages
Creating the openssl manpages, which happens as part of do_install(),
can take a significant amount of time (e.g. ~50 seconds on a quad
core laptop). Provide a PACKAGECONFIG option to allow creation of the
manpages to be skipped completely if not required and inherit the
manpages class to automatically control the PACKAGECONFIG option
(based on the "api-documentation" distro feature).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Sat, 28 Jul 2018 20:39:21 +0000 (13:39 -0700)]
openssl_1.0: drop unmaintained darwin support
The fact that the darwin support only appears to consider x86 (and
not x86_64) suggests that it's not maintained or tested. In general
oe-core doesn't support building on darwin.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Sat, 28 Jul 2018 20:39:20 +0000 (13:39 -0700)]
openssl_1.0: drop obsolete exporting of AS, EX_LIBS and DIRS
Previously (when EXTRA_OEMAKE contained -e) exporting these variables
over-rode default values in the top-level openssl Makefile. However,
since -e was removed from EXTRA_OEMAKE as part of:
exporting these variables does nothing. The comment from that commit
that only AR is affected by removing -e wasn't correct, but the
effects of letting the openssl Makefile also control AS, EX_LIBS and
DIRS seem to be either benign or beneficial.
Since without -e make ignores DIRS from the environment and always
runs for all subdirs (including "test"), adding "test" to DIRS and
calling "make depend" again from do_compile_ptest() can be dropped.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Sat, 28 Jul 2018 20:39:19 +0000 (13:39 -0700)]
openssl_1.0: drop obsolete ca.patch
This patch adds a second line to the -help output of the CA.pl script
(which lists almost the same command line options as the line above
it but in a slightly different order). Although it's tagged as a
Debian backport, there's no patch like it in recent Debian patch sets
for openssl 1.0.2.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rm_work if enabled leads to some tests failing that rely on artifacts
being present. Check if rm_work.bbclass is included and show an error
and exit if it is.
ERROR: glibc-locale-2.27-r0 do_package_qa: QA Issue: glibc-locale: /glibc-binary-localedata-hy-am/usr/lib/locale/hy_AM/LC_MEASUREMENT.tmp is owned by uid 3004, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
iptables: Split the iptables modules into separate packages
By splitting the iptables modules into separate packages it is
possible to pick and choose the modules to install and thereby reduce
the total size of the installed modules.
Backwards compatibility is maintained by adding a recommendation of
iptables-modules, which is a meta package that depends on all the
generated packages.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
distutils/distutils3: do not try to fetch code during do_configure
For distutils3, any setup.py invoking will cause setup_requires
argument to trigger a code fetching. Since the following commit
applied in oe-core, code fetching occurs during do_confugire
before the do_compile.
... b805cef distutils: clean the build tree in do_configure
...
Refer what do_compile did, add var-NO_FETCH_BUILD to do_configure.
Sync with distutils3, add do_configure to distutils also.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Fri, 27 Jul 2018 07:36:17 +0000 (15:36 +0800)]
python3-subunit: add it for oeqa
- It is required by oeqa, add it so that we can add nativesdk-python3-subunit
to buildtools-tarball.
- The original one is python-subunit_1.1.0.bb which is from meta-openstack
layer, I divided it into python-subunit.inc and python3-subunit_1.1.0.bb
and extended to nativesdk.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Fri, 27 Jul 2018 07:36:17 +0000 (15:36 +0800)]
python3-testtools: add it for oeqa
- It is required by oeqa, add it so that we can add nativesdk-python3-testtools
to buildtools-tarball.
- The original one is python-testtools_2.3.0.bb which is from meta-openstack
layer, I divided it into python-testtools.inc and python3-testtools_2.2.0.bb,
and extended to nativesdk.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Fri, 27 Jul 2018 06:59:25 +0000 (14:59 +0800)]
python3-extras: add it for python3-testtools
- The python3-testtools RDEPENDS on it.
- The original one is python-extras_1.0.0.bb which is from meta-openstack
layer, I divided it into python-extras.inc and python3-extras_1.0.0.bb, and
extended to nativesdk.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 27 Jul 2018 14:23:12 +0000 (15:23 +0100)]
oeqa/runtime/scanelf: remove
These tests are intended to search for bad RPATHs and text relocations, but we
do these tests at buildtime and as pax-utils is never installed in any default
images the tests are never executed.
Ross Burton [Fri, 27 Jul 2018 11:48:41 +0000 (12:48 +0100)]
usbutils: upgrade to 010
Upgrade to 010.
usbutils uses libusb1 not the older libusb-compat library.
Refresh (and submit upstream) the bashism removal for usb-devices.
Fix LICENSE as lsusb.py is GPLv2 or v3, and set per-package LICENSE fields as
appropriate. The actual license texts are missing from the 010 tarball (fixed
in git) so point at the SPDX statements in the source files instead.
Remove FILES_${PN}-dev as usbutils.pc doesn't exist anymore.
Remove lsusb.py hashbang change as this doesn't cause any problems now
(installed hashbang is /usr/bin/env python3).
Remove spurious zlib build dependency that isn't required.
Remove spurious RDEPENDS_${PN}-ptest, which doesn't exist.
Ross Burton [Thu, 26 Jul 2018 22:39:42 +0000 (23:39 +0100)]
ovmf: remove ossp-util from DEPENDS
This was added back in the meta-luv days[1] presumably under the impression that
it needs ossp-uuid but in reality we rename ossp-uuid's library and uuid.h comes
from util-linux.
The following patches are removed because problems have been fixed in this version.
0001-shadow-CVE-2017-12424
fix-installation-failure-with-subids-disabled.patch
usermod-fix-compilation-failure-with-subids-disabled.patch
CVE-2017-2616.patch
check_size_of_uid_t_and_gid_t_using_AC_CHECK_SIZEOF.patch
0001-Do-not-read-login.defs-before-doing-chroot.patch
The following patches are rebased.
0001-Disable-use-of-syslog-for-sysroot.patch
0001-useradd-copy-extended-attributes-of-home.patch
0001-useradd.c-create-parent-directories-when-necessary.patch
allow-for-setting-password-in-clear-text.patch
Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 26 Jul 2018 11:09:58 +0000 (11:09 +0000)]
package.bbclass: append to FILERPROVIDES_*/FILERDEPENDS_* variables instead of setting them
* this allows to work around some of the issues with file-rdeps
* e.g. in my case I have /usr/lib/libmali.so.0.1 which according to rpmdeps
provides only following libmali*
libmali.so(LIBMALI_1.0)
libmali.so.0.1
but many users of this link with libmali.so directly and according to
rpmdeps require libmali.so which causes file-rdeps for a lot of
recipes
* I was using simple work around to just set:
RPROVIDES_${PN} = "libmali.so libGLESv2.so libEGL.so"
but that doesn't work well with multilib, because the value gets
expanded with MLPREFIX and
RPROVIDES_${PN} = "lib32-libmali.so lib32-libGLESv2.so lib32-libEGL.so"
doesn't help at all.
[YOCTO #9217] Many unsolveable QA warnings from build-deps and file-rdeps
While native building, there is a parallel failure
[snip]
|: && mkdir -p doc && ./pre-inst-env /usr/bin/env perl
../automake-1.16.1/doc/help2man --output=doc/aclocal-1.16.1
aclocal-1.16
|help2man: can't get `--help' info from aclocal-1.16
|Try `--no-discard-stderr' if option outputs to stderr
Makefile:3693: recipe for target 'doc/aclocal-1.16.1' failed
[snip]
Richard Purdie [Thu, 26 Jul 2018 12:03:46 +0000 (12:03 +0000)]
selftest/wic: Fix/cleanup class setup code
The code was using Wic instead of WicTestCase for image_is_ready and
native_sysroot which was confusing some tests. Fix image_is_ready.
For native_sysroot, convert the only user to just run the call itself
as there is no point in executing this for all the other tests which
don't use the value.
Whilst here, move _get_image_env_path to the base class alongside
its parent variabe and fix it to use WicTestCase.
Daniel Díaz [Wed, 25 Jul 2018 18:35:34 +0000 (13:35 -0500)]
glibc: Avoid multilibbing on wordsize.h
Once another header #includes <bits/wordsize.h>, there is a
potential recursion going on because the
multilib_header_wrapper.h #includes <bits/wordsize.h> again!
This should not happen because an __arm__ (32-bits) or an
__aarch64__ (64-bits) environment guarantees that we will
be getting the correct definition, but when building against
a different target (like BPF), recursion is what happens.
This can be seen, for instance, when building eBPF programs
from the kernel with `clang -target bpf', such as the ones
located in linux/tools/testing/selftests/bpf/.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Tue, 24 Jul 2018 02:38:52 +0000 (19:38 -0700)]
openssl_1.0: avoid running make twice for target do_compile()
Currently target builds call make twice as part of do_compile(). It
appears to be an accidental side effect of needing to only pass
CC_INFO on the make command line for target builds, since CC_INFO is
only referenced by the reproducible build patches.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Tue, 24 Jul 2018 02:38:50 +0000 (19:38 -0700)]
openssl_1.0: fix cryptodev-linux PACKAGECONFIG support
Since openssl isn't an autotools recipe, defining cryptodev-linux
related config options via PACKAGECONFIG hasn't worked correctly
since PACKAGECONFIG_CONFARGS stopped being automatically appended to
EXTRA_OECONF in 2016:
The issue appears to have been hidden as the flags are also hardcoded
in CFLAG - and therefore always enabled, regardless of the state of
the PACKAGECONFIG option. Fix by passing both EXTRA_OECONF and
PACKAGECONFIG_CONFARGS when running the openssl Configure script.
Although the openssl 1.1 recipe doesn't contain any PACKAGECONFIG
options yet, pre-emptively make the same fix there too.
Also only enable cryptodev-linux by default for target builds (based
on the historical comments in the recipe, that seems to have been the
original intention).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add packageconfigs for gl, libde265, lcms2, openh264, tinyalsa, ttml,
webrtc, webrtcdsp
* Remove unnecessary gstglconfig.h line, since that file is no longer
part of -bad (it is in -base now)
* Update EXTRA_OECONF flags, since new plugins got added to -bad
* Add ttml to the default packageconfigs since its dependencies are
all in oe-core
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Leaving -Wcross out of the bbnote version of the autoreconf command
seems to be a long standing inconsistency (dating back to the very
first commit in oe-core) but there's no obvious reason to do so.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-efi support on arm is enabled as below
commit:
commit 65f9fb788371a9a08e3b0e6febecb9cc2aaeefe7
Author: Kristian Amlie <kristian.amlie@northern.tech>
Date: Tue Jul 10 16:07:12 2018 +0200
grub-efi: Provide target architecture for 32-bit ARM.
* But it fails on arm as below:
| grub-mkimage: error: cannot open `./grub-core//serial.mod': No such file or directory.
Set GRUBPLATFORM_arm = "efi" to fix the above error
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
