Given this is only relevant for BPF tail call maps, it is adding up space
and penalizing other map types. We also need to extend this with further
objects to track / compare to. Therefore, lets move this out into a separate
structure and dynamically allocate it only for BPF tail call maps.
Add a cookie to BPF maps to uniquely identify BPF maps for the timespan
when the node is up. This is different to comparing a pointer or BPF map
id which could get rolled over and reused.
It post-processes samples to find which DSO has samples. Based on that
info, it can save used DSOs in the build-ID cache directory. But for
some reason, it saves all DSOs without checking the hit mark. Skipping
unused DSOs can give some speedup especially with --buildid-mmap being
default.
On my idle machine, `time perf record -a sleep 1` goes down from 3 sec
to 1.5 sec with this change.
Fixes: e29386c8f7d71fa5 ("perf record: Add --buildid-mmap option to enable PERF_RECORD_MMAP2's build id") Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20250731070330.57116-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
scarlett2_input_select_ctl_info() sets up the string arrays allocated
via kasprintf(), but it misses NULL checks, which may lead to NULL
dereference Oops. Let's add the proper NULL check.
In dbAllocCtl(), read_metapage() increases the reference count of the
metapage. However, when dp->tree.budmin < 0, the function returns -EIO
without calling release_metapage() to decrease the reference count,
leading to a memory leak.
Add release_metapage(mp) before the error return to properly manage
the metapage reference count and prevent the leak.
Fixes: a5f5e4698f8abbb25fe4959814093fb5bfa1aa9d ("jfs: fix shift-out-of-bounds in dbSplit") Signed-off-by: Zheng Yu <zheng.yu@northwestern.edu> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We are using pci_get_domain_bus_and_slot() function to verify if
the given config directory name matches any existing PCI device,
but we missed to call matching pci_dev_put() to release reference.
While around, also change error code in case of no device match,
to make it more specific than generic formatting error.
Fixes: 16280ded45fb ("drm/xe: Add configfs to enable survivability mode") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250722141059.30707-2-michal.wajdeczko@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 0bdd05c2a82bbf2419415d012fd4f5faeca7f1af) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Zero-length AV pairs should be considered as valid target infos.
Don't skip the next AV pairs that follow them.
Cc: linux-cifs@vger.kernel.org Cc: David Howells <dhowells@redhat.com> Fixes: 0e8ae9b953bc ("smb: client: parse av pair type 4 in CHALLENGE_MESSAGE") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot
allocate a struct fb_modelist. If that happens, the modelist stays empty but
the driver continues to register. Add a check for its return value to prevent
poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var").
The `adf_ring_next()` function in the QAT debug transport interface
fails to correctly update the position index when reaching the end of
the ring elements. This triggers the following kernel warning when
reading ring files, such as
/sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:
[27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index
Ensure that the `*pos` index is incremented before returning NULL when
after the last element in the ring is found, satisfying the seq_file API
requirements and preventing the warning.
Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
QAT devices perform an additional integrity check during compression by
decompressing the output. Starting from QAT GEN4, this verification is
done in-line by the hardware. However, on GEN2 devices, the hardware
reads back the compressed output from the destination buffer and performs
a decompression operation using it as the source.
In the current QAT driver, destination buffers are always marked as
write-only. This is incorrect for QAT GEN2 compression, where the buffer
is also read during verification. Since commit 6f5dc7658094
("iommu/vt-d: Restore WO permissions on second-level paging entries"),
merged in v6.16-rc1, write-only permissions are strictly enforced, leading
to DMAR errors when using QAT GEN2 devices for compression, if VT-d is
enabled.
Mark the destination buffers as DMA_BIDIRECTIONAL. This ensures
compatibility with GEN2 devices, even though it is not required for
QAT GEN4 and later.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Fixes: cf5bb835b7c8 ("crypto: qat - fix DMA transfer direction") Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the `clk_round_rate` implementation for Versal platforms by calling
the Versal-specific divider calculation helper. The existing code used
the generic divider routine, which results in incorrect round rate.
arch/sh/Makefile defines and exports ld-bfd to be used by
arch/sh/boot/compressed/Makefile and arch/sh/boot/romimage/Makefile.
However some shells, including dash, will not pass through environment
variables whose name includes a hyphen. Usually GNU make does not use
a shell to recurse, but if e.g. $(srctree) contains '~' it will use a
shell here.
Other instances of this problem were previously fixed by commits 2bfbe7881ee0 "kbuild: Do not use hyphen in exported variable name"
and 82977af93a0d "sh: rename suffix-y to suffix_y".
Rename the variable to ld_bfd.
References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=sh4&ver=4.13%7Erc5-1%7Eexp1&stamp=1502943967&raw=0 Fixes: 7b022d07a0fd ("sh: Tidy up the ldscript output format specifier.") Signed-off-by: Ben Hutchings <benh@debian.org> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Return 0 instead of -EINVAL if function ccu_pll_recalc_rate() fails to
get correct rate entry. Follow .recalc_rate callback documentation
as mentioned in include/linux/clk-provider.h for error return value.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in> Fixes: 1b72c59db0add ("clk: spacemit: Add clock support for SpacemiT K1 SoC") Reviewed-by: Haylen Chu <heylenay@4d2.org> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://lore.kernel.org/r/aIBzVClNQOBrjIFG@bhairav-test.ee.iitb.ac.in Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
For the XCVR module on i.MX95, even though it only supports SPDIF, the
channel status needs to be obtained from RAM space, which is processed
by firmware. Firmware is necessary to trigger the FSL_XCVR_IRQ_NEW_CS
interrupt.
This change also applies for the SPDIF & ARC function on i.MX8MP which
has the firmware.
Fixes: e6a9750a346b ("ASoC: fsl_xcvr: Add suspend and resume support") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://patch.msgid.link/20250710030405.3370671-3-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no PHY for the XCVR module on i.MX93, the channel status needs
to be obtained from FSL_XCVR_RX_CS_DATA_* registers. And channel status
acknowledge (CSA) bit should be set once channel status is processed.
Fixes: e240b9329a30 ("ASoC: fsl_xcvr: Add support for i.MX93 platform") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://patch.msgid.link/20250710030405.3370671-2-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current regmap readable/writeable helper functions always
allow the Next flag and allows any Control Number. Mask the Next
flag based on SDCA_ACCESS_MODE_DUAL which is the only Mode that
supports it. Also check that the Control Number is valid for
the given control.
This patch reflects the change made to move TPS65215 from 1 GPO and 1 GPIO
to 2 GPOs and 1 GPIO. TPS65215 and TPS65219 both have 2 GPOs and 1 GPIO.
TPS65214 has 1 GPO and 1 GPIO. TPS65215 will reuse the TPS65219 GPIO
compatible string.
Fixes: 7947219ab1a2 ("mfd: tps65219: Add support for TI TPS65214 PMIC") Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com> Link: https://lore.kernel.org/r/20250527190455.169772-2-s-ramamoorthy@ti.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
FILENAME_MAX is the same as PATH_MAX (4kb) in glibc rather than
NAME_MAX's 255. Switch to using NAME_MAX and ensure the '\0' is
accounted for in the path's buffer size.
Fixes: 754baf426e09 ("perf pmu: Change aliases from list to hashmap") Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250717150855.1032526-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
FILENAME_MAX is often PATH_MAX (4kb), far more than needed for the
/proc path. Make the buffer size sufficient for the maximum integer
plus "/proc/" and "/status" with a '\0' terminator.
Mux clocks are now described with a customized ccu_mux structure
consisting of ccu_internal and ccu_common substructures, and registered
later with devm_clk_hw_register_mux_parent_data_table(). As this helper
always allocates a new clk_hw structure, it's extremely hard to use mux
clocks as parents statically by clk_hw pointers, since CCF has no
knowledge about the clk_hw structure embedded in ccu_mux.
This scheme already causes issues for clock c910, which takes a mux
clock, c910-i0, as a possible parent. With mainline U-Boot that
reparents c910 to c910-i0 at boottime, c910 is considered as an orphan
by CCF.
This patch refactors handling of mux clocks, embeds a clk_mux structure
in ccu_mux directly. Instead of calling devm_clk_hw_register_mux_*(),
we could register mux clocks on our own without allocating any new
clk_hw pointer, fixing c910 clock's issue.
Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Drew Fustini <fustini@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The do_k_string() and do_c_string() functions do essentially the same
thing which is they add a string and a comma onto the end of an existing
string. At the end, the caller will overwrite the last comma with a
newline. Later, in orangefs_kernel_debug_init(), we add a newline to
the string.
The change to do_k_string() is just cosmetic. I moved the "- 1" to
the other side of the comparison and made it "+ 1". This has no
effect on runtime, I just wanted the functions to match each other
and the rest of the file.
However in do_c_string(), I removed the "- 2" which allows us to print
two extra characters. I noticed this issue while reviewing the code
and I doubt affects anything in real life. My guess is that this was
double counting the comma and the newline. The "+ 1" accounts for
the newline, and the caller will delete the final comma which ensures
there is enough space for the newline.
Removing the "- 2" lets us print 2 more characters, but mainly it makes
the code more consistent and understandable for reviewers.
Fixes: 44f4641073f1 ("orangefs: clean up debugfs globals") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As per a commit from Qualcomm's downstream 6.1 kernel[0], the init
sequence is missing setting the CMN_CTRL_OVERRIDE_EN bit back to 0 at
the end, as per the 'latest' HPG revision (as of November 2023).
When enabling runtime PM for clock suppliers that also belong to a power
domain, the following crash is thrown:
error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_mux_get_parent+0x60/0x90
lr : clk_core_reparent_orphans_nolock+0x58/0xd8
Call trace:
clk_mux_get_parent+0x60/0x90
clk_core_reparent_orphans_nolock+0x58/0xd8
of_clk_add_hw_provider.part.0+0x90/0x100
of_clk_add_hw_provider+0x1c/0x38
imx95_bc_probe+0x2e0/0x3f0
platform_probe+0x70/0xd8
Enabling runtime PM without explicitly resuming the device caused
the power domain cut off after clk_register() is called. As a result,
a crash happens when the clock hardware provider is added and attempts
to access the BLK_CTL register.
Fix this by using devm_pm_runtime_enable() instead of pm_runtime_enable()
and getting rid of the pm_runtime_disable() in the cleanup path.
Fixes: 5224b189462f ("clk: imx: add i.MX95 BLK CTL clk driver") Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20250707-imx95-blk-ctl-7-1-v3-2-c1b676ec13be@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
__iomem attribute is supposed to be used only with variables holding the
MMIO pointer. But here, 'mw_addr' variable is just holding a 'void *'
returned by pci_epf_alloc_space(). So annotating it with __iomem is clearly
wrong. Hence, drop the attribute.
This also fixes the below sparse warning:
drivers/pci/endpoint/functions/pci-epf-vntb.c:524:17: warning: incorrect type in assignment (different address spaces)
drivers/pci/endpoint/functions/pci-epf-vntb.c:524:17: expected void [noderef] __iomem *mw_addr
drivers/pci/endpoint/functions/pci-epf-vntb.c:524:17: got void *
drivers/pci/endpoint/functions/pci-epf-vntb.c:530:21: warning: incorrect type in assignment (different address spaces)
drivers/pci/endpoint/functions/pci-epf-vntb.c:530:21: expected unsigned int [usertype] *epf_db
drivers/pci/endpoint/functions/pci-epf-vntb.c:530:21: got void [noderef] __iomem *mw_addr
drivers/pci/endpoint/functions/pci-epf-vntb.c:542:38: warning: incorrect type in argument 2 (different address spaces)
drivers/pci/endpoint/functions/pci-epf-vntb.c:542:38: expected void *addr
drivers/pci/endpoint/functions/pci-epf-vntb.c:542:38: got void [noderef] __iomem *mw_addr
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250709125022.22524-1-mani@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The bus->params should be restored if the stream is failed to prepare.
The issue exists since beginning. The Fixes tag just indicates the
first commit that the commit can be applied to.
/proc/cgroups lists only v1 controllers by default, however, this is
only enforced since the commit af000ce85293b ("cgroup: Do not report
unavailable v1 controllers in /proc/cgroups") and there is software in
the wild that uses content of /proc/cgroups to decide on availability of
v2 (sic) controllers.
Add a boottime param that can bring back the previous behavior for
setups where the check in the software cannot be changed and it causes
e.g. unintended OOMs.
Also, this patch takes out cgrp_v1_visible from cgroup1_subsys_absent()
guard since it's only important to check which hierarchy (v1 vs v2) the
subsys is attached to. This has no effect on the printed message but
the code is cleaner since cgrp_v1_visible is really about mounted
hierarchies, not the content of /proc/cgroups.
Link: https://lore.kernel.org/r/b26b60b7d0d2a5ecfd2f3c45f95f32922ed24686.camel@decadent.org.uk Fixes: af000ce85293b ("cgroup: Do not report unavailable v1 controllers in /proc/cgroups") Fixes: a0ab1453226d8 ("cgroup: Print message when /proc/cgroups is read on v2-only system") Signed-off-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The TCVCMAP (Traffic Class to Virtual Channel Mapping) field in the
PVC0CTL and PVC1CTL register controls how traffic classes are mapped to
virtual channels in QAT GEN6 hardware.
The driver previously wrote a default TCVCMAP value to this register, but
this configuration was incorrect.
Modify the TCVCMAP configuration to explicitly enable both VC0 and VC1,
and map Traffic Classes 0 to 7 → VC0 and Traffic Class 8 → VC1.
Replace FIELD_PREP() with FIELD_MODIFY() to ensure that only the intended
TCVCMAP field is updated, preserving other bits in the register. This
prevents unintended overwrites of unrelated configuration fields when
modifying TC to VC mappings.
The ZUC-256 EEA (encryption) and EIA (integrity) algorithms are not
supported on QAT GEN5 devices, as their current implementation does not
align with the NIST specification. Earlier versions of the ZUC-256
specification used a different initialization scheme, which has since
been revised to comply with the 5G specification.
Due to this misalignment with the updated specification, remove support
for ZUC-256 EEA and EIA for QAT GEN5 by masking out the ZUC-256
capability.
Fixes: fcf60f4bcf549 ("crypto: qat - add support for 420xx devices") Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Update the min, max ranges of the PLL clocks according to the latest
datasheet to be coherent in the driver. This patch solves the issues in
configuring the clocks related to peripherals with the desired frequency
within the range.
Currently we clear BH_New bit in case of error and also in the standard
ext4_write_end() handler (in block_commit_write()). However
ext4_journalled_write_end() misses this clearing and thus we are leaving
stale BH_New bits behind. Generally ext4_block_write_begin() clears
these bits before any harm can be done but in case blocksize < pagesize
and we hit some error when processing a page with these stale bits,
we'll try to zero buffers with these stale BH_New bits and jbd2 will
complain (as buffers were not prepared for writing in this transaction).
Fix the problem by clearing BH_New bits in ext4_journalled_write_end()
and WARN if ext4_block_write_begin() sees stale BH_New bits.
Reported-by: Baolin Liu <liubaolin12138@163.com> Reported-by: Zhi Long <longzhi@sangfor.com.cn> Fixes: 3910b513fcdf ("ext4: persist the new uptodate buffers in ext4_journalled_zero_new_buffers") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250709084831.23876-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
In ext4_io_end_defer_completion(), check if io_end->list_vec is empty to
avoid adding an io_end that requires no conversion to the
i_rsv_conversion_list, which in turn prevents starting an unnecessary
worker. An ext4_emergency_state() check is also added to avoid attempting
to abort the journal in an emergency state.
Additionally, ext4_put_io_end_defer() is refactored to call
ext4_io_end_defer_completion() directly instead of being open-coded.
This also prevents starting an unnecessary worker when EXT4_IO_END_FAILED
is set but data_err=abort is not enabled.
This ensures that the check in ext4_put_io_end_defer() is consistent with
the check in ext4_end_bio(). Otherwise, we might add an io_end to the
i_rsv_conversion_list and then call ext4_finish_bio(), after which the
inode could be freed before ext4_end_io_rsv_work() is called, triggering
a use-after-free issue.
Fixes: ce51afb8cc5e ("ext4: abort journal on data writeback failure if in data_err=abort mode") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250708111504.3208660-1-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current cpu.max tests (both the normal one and the nested one) are broken.
They setup cpu.max with 1000 us quota and the default period (100,000 us).
A cpu hog is run for a duration of 1s as per wall clock time. This corresponds
to 10 periods, hence an expected usage of 10,000 us. We want the measured
usage (as per cpu.stat) to be close to 10,000 us.
Previously, this approximate equality test was done by
`!values_close(usage_usec, expected_usage_usec, 95)`: if the absolute
difference between usage_usec and expected_usage_usec is greater than 95% of
their sum, then we pass. And expected_usage_usec was set to 1,000,000 us.
Mathematically, this translates to the following being true for pass:
If usage < expected_usage:
expected_usage - usage > (usage + expected_usage)*0.95
0.05*expected_usage > 1.95*usage
usage < 0.0256*expected_usage = 25,600 us
Combined,
Pass if usage < 25,600 us or > 39 s,
which makes no sense given that all we need is for usage_usec to be close to
10,000 us.
Fix this by explicitly calcuating the expected usage duration based on the
configured quota, default period, and the duration, and compare usage_usec
and expected_usage_usec using values_close() with a 10% error margin.
Also, use snprintf to get the quota string to write to cpu.max instead of
hardcoding the quota, ensuring a single source of truth.
Remove the check comparing user_usec and expected_usage_usec, since on running
this test modified with printfs, it's seen that user_usec and usage_usec can
regularly exceed the theoretical expected_usage_usec:
The "rec->len" value comes from the firmware. We generally do
trust firmware, but it's always better to double check. If
the length value is too large it would lead to memory corruption
when we set "data[i] = ret;"
Fixes: 217209db0204 ("watchdog: ziirave_wdt: Add support to upload the firmware.") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/3b58b453f0faa8b968c90523f52c11908b56c346.1748463049.git.dan.carpenter@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since it's not currently safe to take device_lock() in the IOMMU probe
path, that can race against really_probe() setting dev->driver before
attempting to bind. The race itself isn't so bad, since we're only
concerned with dereferencing dev->driver itself anyway, but sadly my
attempt to implement the check with minimal churn leads to a kind of
Time-of-Check to Time-of-Use (TOCTOU) issue, where dev->driver becomes
valid after to_pci_driver(NULL) is already computed, and thus the check
fails to work as intended.
Will and I both hit this with the platform bus, but the pattern here is
the same, so fix it for correctness too.
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reported-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Will McVicker <willmcvicker@google.com> Link: https://patch.msgid.link/20250425133929.646493-4-robin.murphy@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 88a678bbc34c ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250630111803.94389-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The de clock is marked with CLK_SET_RATE_PARENT, which is really not
necessary (as confirmed from experimentation) and significantly
restricts flexibility for other clocks using the same parent.
In addition the source selection (parent) field is marked as using
2 bits, when it the documentation reports that it uses 3.
Fix both issues in the de clock definition.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Paul Kocialkowski <paulk@sys-base.io> Link: https://patch.msgid.link/20250704154008.3463257-1-paulk@sys-base.io Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The calculation of journal credits in ext4_meta_trans_blocks() should
include pextents, as each extent separately may be allocated from a
different group and thus need to update different bitmap and group
descriptor block.
Fixes: 0e32d8617012 ("ext4: correct the journal credits calculations of allocating blocks") Reported-by: Jan Kara <jack@suse.cz> Closes: https://lore.kernel.org/linux-ext4/nhxfuu53wyacsrq7xqgxvgzcggyscu2tbabginahcygvmc45hy@t4fvmyeky33e/ Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Baokun Li <libaokun1@huawei.com> Link: https://patch.msgid.link/20250707140814.542883-11-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "osc_12m" fixed factor clock refers the external oscillator by
setting clk_parent_data.fw_name to osc_24m, which is obviously wrong
since no clock-names property is allowed for compatible
thead,th1520-clk-ap.
Refer the oscillator as parent by index instead.
Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks") Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Drew Fustini <fustini@kernel.org> Signed-off-by: Drew Fustini <fustini@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Tool PMUs assume that stat's process_counter_values is being used to
read the counters. Specifically they hold onto old values in
evsel->prev_raw_counts and give the cumulative count based off of this
value. Update pyrf_evsel__read to allocate counts and prev_raw_counts,
use evsel__read_counter rather than perf_evsel__read so tool PMUs are
read from not just perf_event_open events, make the returned
pyrf_counts_values contain the delta value rather than the cumulative
value.
Long names like ucsi_source_psy_USBC000:001 when prefixed with hwmon_
exceed the buffer size and the last digit is lost. This causes
confusion with similar names like ucsi_source_psy_USBC000:002. Extend
the buffer size to avoid this.
Fixes: 53cc0b351ec9 ("perf hwmon_pmu: Add a tool PMU exposing events from hwmon in sysfs") Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250710235126.1086011-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5a3e85c3c397 ("pinmux: Use sequential access to access
desc->pinmux data") tried to address the issue when two client of the
same gpio calls pinctrl_select_state() for the same functionality, was
resulting in NULL pointer issue while accessing desc->mux_owner.
However, issue was not completely fixed due to the way it was handled
and it can still result in the same NULL pointer.
The issue occurs due to the following interleaving:
This sequence leads to a state where the pin appears to be in use
(`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can
cause NULL pointer on next pin_request on the same pin.
Ensure that updates to mux_usecount and mux_owner are performed
atomically under the same lock. Only clear mux_owner when mux_usecount
reaches zero and no new owner has been assigned.
Per Table 8-143. "Get Partition Info Output Payload" in CXL r3.2 section
8.2.10.9.2.1 "Get Partition Info(Opcode 4100h)", DPA 0 is a valid
address of a CXL device. However, cxl_do_ppr() considers it as an
invalid address, so that user will get an -EINVAL when user calls the
sysfs interface of the edac driver to trigger a Post Package Repair(PPR)
operation for DPA 0 on a CXL device. The correct implementation should
be checking if the input DPA is in the DPA range of the CXL device.
Fixes: be9b359e056a ("cxl/edac: Add CXL memory device soft PPR control feature") Signed-off-by: Li Ming <ming.li@zohomail.com> Tested-by: Shiju Jose <shiju.jose@huawei.com> Reviewed-by: Shiju Jose <shiju.jose@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://patch.msgid.link/20250711032357.127355-3-ming.li@zohomail.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In CXL subsystem, many functions need to check an address availability
by checking if the resource range contains the address. Providing a new
helper function cxl_resource_contains_addr() to check if the resource
range contains the input address.
Suggested-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Li Ming <ming.li@zohomail.com> Tested-by: Shiju Jose <shiju.jose@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Link: https://patch.msgid.link/20250711032357.127355-2-ming.li@zohomail.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Stable-dep-of: 03ff65c02559 ("cxl/edac: Fix wrong dpa checking for PPR operation") Signed-off-by: Sasha Levin <sashal@kernel.org>
Check pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario.
It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF in
proc_get_inode()"). Followed by AI Viro's suggestion, fix it in same
manner.
Link: https://lkml.kernel.org/r/20250607021353.1127963-1-wangzijie1@honor.com Fixes: 3f61631d47f1 ("take care to handle NULL ->proc_lseek()") Signed-off-by: wangzijie <wangzijie1@honor.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The call to rdma_uattrs_has_raw_cap() is placed in mlx5 fs.c file,
which is compiled without relation to CONFIG_INFINIBAND_USER_ACCESS.
Despite the check is used only in flows with CONFIG_INFINIBAND_USER_ACCESS=y|m,
the compilers generate the following error for CONFIG_INFINIBAND_USER_ACCESS=n
builds.
A CPU mask on the stack is broken for large values of CONFIG_NR_CPUS:
kernel/trace/preemptirq_delay_test.c: In function ‘preemptirq_delay_run’:
kernel/trace/preemptirq_delay_test.c:143:1: error: the frame size of 8512 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Freeing of filters requires to wait for both an RCU grace period as well as
a RCU task trace wait period after they have been detached from their
lists. The trace task period can be quite large so the freeing of the
filters was moved to use the call_rcu*() routines. The problem with that is
that the callback functions of call_rcu*() is done from a soft irq and can
cause latencies if the callback takes a bit of time.
The filters are freed per event in a system and the syscalls system
contains an event per system call, which can be over 700 events. Freeing 700
filters in a bottom half is undesirable.
Instead, move the freeing to use queue_rcu_work() which is done in task
context.
hr_dev->pgdir_list and hr_dev->pgdir_mutex won't be initialized if
CQ/QP record db are not enabled, but they are also needed when using
SRQ with SRQ record db enabled. Simplified the logic by always
initailizing the reosurces.
ACK_REQ_FREQ indicates the number of packets (after MTU fragmentation)
HW sends before setting an ACK request. When MTU is greater than or
equal to 1024, the current ACK_REQ_FREQ value causes HW to request an
ACK for every MTU fragment. The processing of a large number of ACKs
severely impacts HW performance when sending large size payloads.
Get message length of ack_req from FW so that we can adjust this
parameter according to different situations. There are several
constraints for ACK_REQ_FREQ:
1. mtu * (2 ^ ACK_REQ_FREQ) should not be too large, otherwise it may
cause some unexpected retries when sending large payload.
2. ACK_REQ_FREQ should be larger than or equal to LP_PKTN_INI.
3. ACK_REQ_FREQ must be equal to LP_PKTN_INI when using LDCP
or HC3 congestion control algorithm.
Fixes: 56518a603fd2 ("RDMA/hns: Modify the value of long message loopback slice") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250703113905.3597124-4-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch sets ccp_debugfs_dir to NULL after destroying it in
ccp5_debugfs_destroy, allowing the directory dentry to be
recreated when rebinding the ccp device.
Tested on AMD Ryzen 7 1700X.
Fixes: 3cdbe346ed3f ("crypto: ccp - Add debugfs entries for CCP information") Signed-off-by: Mengbiao Xiong <xisme1998@gmail.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Fixes: c957f8b3e2e5 ("crypto: inside-secure - avoid unmapping DMA memory that was not mapped") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The __snp_alloc_firmware_pages() helper allocates pages in the firmware
state (alloc + rmpupdate). In case of failed rmpupdate, it tries
reclaiming pages with already changed state. This requires calling
the PSP firmware and since there is sev_cmd_mutex to guard such calls,
the helper takes a "locked" parameter so specify if the lock needs to
be held.
Most calls happen from snp_alloc_firmware_page() which executes without
the lock. However
commit 24512afa4336 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled")
switched sev_fw_alloc() from alloc_pages() (which does not call the PSP) to
__snp_alloc_firmware_pages() (which does) but did not account for the fact
that sev_fw_alloc() is called from __sev_platform_init_locked()
(via __sev_platform_init_handle_tmr()) and executes with the lock held.
Add a "locked" parameter to __snp_alloc_firmware_pages().
Make sev_fw_alloc() use the new parameter to prevent potential deadlock in
rmp_mark_pages_firmware() if rmpupdate() failed.
Fixes: 24512afa4336 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled") Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Pratik R. Sampat <prsampat@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
hns_roce_clear_extdb_list_info() will eventually do some HW
configurations through FW, and they need to be cleared by
calling hns_roce_function_clear() when the initialization
fails.
Fixes: 7e78dd816e45 ("RDMA/hns: Clear extended doorbell info before using") Signed-off-by: wenglianfa <wenglianfa@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250703113905.3597124-3-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
rsv_qp may be double destroyed in error flow, first in free_mr_init(),
and then in hns_roce_exit(). Fix it by moving the free_mr_init() call
into hns_roce_v2_init().
The pll1_d8 clock is enabled by the boot loader, and is ultimately a
parent for numerous clocks, including those used by APB and AXI buses.
Guodong Xu discovered that this clock got disabled while responding to
getting -EPROBE_DEFER when requesting a reset controller.
The needed clock (CLK_DMA, along with its parents) had already been
enabled. To respond to the probe deferral return, the CLK_DMA clock
was disabled, and this led to parent clocks also reducing their enable
count. When the enable count for pll1_d8 was decremented it became 0,
which caused it to be disabled. This led to a system hang.
Marking that clock critical resolves this by preventing it from being
disabled.
Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to
be supplied for a CCU_FACTOR_GATE clock.
Fixes: 1b72c59db0add ("clk: spacemit: Add clock support for SpacemiT K1 SoC") Signed-off-by: Alex Elder <elder@riscstar.com> Tested-by: Guodong Xu <guodong@riscstar.com> Reviewed-by: Haylen Chu <heylenay@4d2.org> Link: https://lore.kernel.org/r/20250612224856.1105924-1-elder@riscstar.com Signed-off-by: Yixun Lan <dlan@gentoo.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The work_atoms should be freed after use. Add free_work_atoms() to
make sure to release all. It should use list_splice_init() when merging
atoms to prevent accessing invalid pointers.
Fixes: b1ffe8f3e0c96f552 ("perf sched: Finish latency => atom rename and misc cleanups") Reviewed-by: Ian Rogers <irogers@google.com> Tested-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250703014942.1369397-8-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In many perf sched subcommand saves priv data structure in the thread
but it forgot to free them. As it's an opaque type with 'void *', it
needs to register that knows how to free the data. In this case, just
regular 'free()' is fine.
Fixes: 04cb4fc4d40a5bf1 ("perf thread: Allow tools to register a thread->priv destructor") Reviewed-by: Ian Rogers <irogers@google.com> Tested-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250703014942.1369397-3-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The parse_options_subcommand() allocates the usage string based on the
given subcommands. So it should reach the end of the function to free
the string to prevent memory leaks.
Fixes: 1a5efc9e13f357ab ("libsubcmd: Don't free the usage string") Reviewed-by: Ian Rogers <irogers@google.com> Tested-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250703014942.1369397-2-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Infineon SEMPER flash family does not support E9h opcode as Exit 4-byte
mode (EX4B). Therefore, params->set_4byte_addr_mode is not determined by
BFPT parse. Fixup it up by introducing vendor specific EX4B opcode (B8h)
and function.
The kcore loading creates a set of list nodes that have reference
counted references to maps of the kcore. The list node freeing in the
success path wasn't releasing the maps, add the missing puts. It is
unclear why this leak was being missed by leak sanitizer.
Fixes: 83720209961f ("perf map: Move map list node into symbol") Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250624190326.2038704-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently perf aborts when it finds an invalid command. I guess it
depends on the environment as I have some custom commands in the path.
$ perf bad-command
perf: 'bad-command' is not a perf-command. See 'perf --help'.
Aborted (core dumped)
It's because the exclude_cmds() in libsubcmd has a use-after-free when
it removes some entries. After copying one to another entry, it keeps
the pointer in the both position. And the next copy operation will free
the later one but it's the same entry in the previous one.
For example, let's say cmds = { A, B, C, D, E } and excludes = { B, E }.
ci cj ei cmds-name excludes
-----------+--------------------
0 0 0 | A B : cmp < 0, ci == cj
1 1 0 | B B : cmp == 0
2 1 1 | C E : cmp < 0, ci != cj
At this point, it frees cmds->names[1] and cmds->names[1] is assigned to
cmds->names[2].
3 2 1 | D E : cmp < 0, ci != cj
Now it frees cmds->names[2] but it's the same as cmds->names[1]. So
accessing cmds->names[1] will be invalid.
This makes the subcmd tests succeed.
$ perf test subcmd
69: libsubcmd help tests :
69.1: Load subcmd names : Ok
69.2: Uniquify subcmd names : Ok
69.3: Exclude duplicate subcmd names : Ok
Fixes: 4b96679170c6 ("libsubcmd: Avoid SEGV/use-after-free when commands aren't excluded") Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250701201027.1171561-3-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The .pylintrc file was introduced by commit 02df8e3b333c ("docs: add a
.pylintrc file with sys path for docs scripts") to provide Python path
configuration for documentation scripts. However, the generic ".*" rule
in .gitignore causes this tracked file to be ignored, leading to warnings
during kernel builds.
Add !.pylintrc to the exception list to explicitly allow this
configuration file to be tracked by git, consistent with other
development tool configuration files like .clang-format and .rustfmt.toml.
This resolves the build warning:
.pylintrc: warning: ignored by one of the .gitignore files
Fixes: 02df8e3b333c ("docs: add a .pylintrc file with sys path for docs scripts") Signed-off-by: WangYuli <wangyuli@uniontech.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/1A357750FF71847E+20250623071933.311947-1-wangyuli@uniontech.com Signed-off-by: Sasha Levin <sashal@kernel.org>
GCC compiler v8.5.0 is not happy about printing
into a too short buffer (when build with `make W=1`):
drivers/leds/leds-pca955x.c:696:5: note: 'snprintf' output between 2 and 11 bytes into a destination of size 8
Unfortunately this is a false positive from the old GCC versions,
but we may still improve the code by using '%hhu' format specifier
and reduce buffer size by 4 bytes.
Fixes: bd3d14932923 ("leds: pca955x: Avoid potential overflow when filling default_label") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506282159.TXfvorYl-lkp@intel.com/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250630093906.1715800-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails. Due to this
when a process is running using Podman, it fails to modify
the QP.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails. Due to this
when a process is running using Podman, it fails to create
the devx object.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
This driver can optionally use the v4l2_flash infrastructure, but fails to
link built=in if that is in a loadable module:
ld.lld-21: error: undefined symbol: v4l2_flash_release
>>> referenced by leds-tps6131x.c:792 (drivers/leds/flash/leds-tps6131x.c:792)
Add the usual Kconfig dependency for it, still allowing it to be built when
CONFIG_V4L2_FLASH_LED_CLASS is disabled.
Fixes: b338a2ae9b31 ("leds: tps6131x: Add support for Texas Instruments TPS6131X flash LED driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20250620114440.4080938-1-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails. Due to this
when a process is running using Podman, it fails to create
the QP.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails. Due to this
when a process is running using Podman, it fails to create
the QP.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails. Due to this
when a process is running using Podman, it fails to create
the anchor.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails. Due to this
when a process is running using Podman, it fails to create
the flow.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
Currently, the capability check is done in the default
init_user_ns user namespace. When a process runs in a
non default user namespace, such check fails. Due to this
when a process is running using Podman, it fails to create
the flow resource.
Since the RDMA device is a resource within a network namespace,
use the network namespace associated with the RDMA device to
determine its owning user namespace.
projects / thirdparty / kernel / stable.git / log
