Since it's a divide-by-0 error, by tracking the code for potential
denominator issues, we've spotted 2 places in which this could happen;
so let's guard against the possibility and log in the kernel if the
condition happens. This is specially useful since some data that
fills some denominators are read from the joycon HW in some cases,
increasing the potential for flaws.
These models use 2xCS35L41amps with HDA using SPI and I2C.
Models use internal and external boost.
All models require DSD support to be added inside
cs35l41_hda_property.c
Some BYTCR x86 tablets with a rt5640 codec have the left and right channels
of their speakers swapped.
Add a new BYT_RT5640_SWAPPED_SPEAKERS quirk for this which sets
cfg-spk:swapped in the components string to let userspace know
about the swapping so that the UCM profile can configure the mixer
to correct this.
Enable this new quirk on the Medion Lifetab S10346 which has its
speakers swapped.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20231217213221.49424-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20231217213221.49424-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround
included in the EC firmware that will cause the EC to emit a "spurious"
keypress during the resume from s0i3 [1].
This series of keypress events can be observed in the kernel log on
resume.
```
atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
```
In some user flows this is harmless, but if a user has specifically
suspended the laptop and then closed the lid it will cause the laptop
to wakeup. The laptop wakes up because the ACPI SCI triggers when
the lid is closed and when the kernel sees that IRQ1 is "also" active.
The kernel can't distinguish from a real keyboard keypress and wakes the
system.
Add the model into the list of quirks to disable keyboard wakeup source.
This is intentionally only matching the production BIOS version in hopes
that a newer EC firmware included in a newer BIOS can avoid this behavior.
Other platforms may need to disable keyboard wakeup besides Cezanne,
so move the detection into amd_pmc_quirks_init() where it may be applied
to multiple platforms.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231212045006.97581-4-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
amd_pmc_wa_czn_irq1() only runs on Cezanne platforms currently but
may be extended to other platforms in the future. Rename the function
and only check platform firmware version when it's called for a Cezanne
based platform.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231212045006.97581-3-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The platform defines will be used by the quirks in the future,
so move them to the common header to allow use by both source
files.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231212045006.97581-2-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some ThinkPad systems ECFW use non-standard addresses for fan control
and reporting. This patch adds support for such ECFW so that it can report
the correct fan values.
Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At present there are ~200 usages of device_lock() in the kernel. Some of
those usages lead to "goto unlock;" patterns which have proven to be
error prone. Define a "device" guard() definition to allow for those to
be cleaned up and prevent new ones from appearing.
It possible that while the rx rb is being handled, the transport has
been stopped and re-started. In this case the tx queue pointer is not
yet initialized, which will lead to a NULL pointer dereference.
Fix it.
Masks the "DSP Virtual Mailbox 2 write" interrupt when before
issuing the hibernate command to the DSP. The interrupt is
unmasked when exiting runtime suspend as it is required for
DSP operation.
Without this change the DSP fires an interrupt when hibernating
causing the system spin between runtime suspend and runtime
resume.
Make use of the recently introduced EXPORT_GPL_DEV_PM_OPS() macro, to
conditionally export the runtime/system PM functions.
Replace the old SET_{RUNTIME,SYSTEM_SLEEP,NOIRQ_SYSTEM_SLEEP}_PM_OPS()
helpers with their modern alternatives and get rid of the now
unnecessary '__maybe_unused' annotations on all PM functions.
Additionally, use the pm_ptr() macro to fix the following errors when
building with CONFIG_PM disabled:
If a pin isn't marked as a wake source processing any interrupts is
just going to destroy battery life. The APU may wake up from a hardware
sleep state to process the interrupt but not return control to the OS.
Mask interrupt for all non-wake source pins at suspend. They'll be
re-enabled at resume.
After the laptop lid is opened, and the device resumes from S3 deep
sleep, if the user presses a keyboard key while the screen is still black,
the mouse and keyboard become unusable.
Enabling this quirk prevents this behavior from occurring.
There have been multiple reports of keyboard issues on recent laptop models
which can be worked around by setting i8042.dumbkbd, with the downside
being this breaks the capslock LED.
It seems that these issues are caused by recent laptops getting confused by
ATKBD_CMD_GETID. Rather then adding and endless growing list of quirks for
this, just skip ATKBD_CMD_GETID alltogether on laptops in translated mode.
The main goal of sending ATKBD_CMD_GETID is to skip binding to ps/2
mice/touchpads and those are never used in translated mode.
Examples of laptop models which benefit from skipping ATKBD_CMD_GETID:
* "HP Laptop 15s-fq2xxx", "HP laptop 15s-fq4xxx" and "HP Laptop 15-dy2xxx"
models the kbd stops working for the first 2 - 5 minutes after boot
(waiting for EC watchdog reset?)
* On "HP Spectre x360 13-aw2xxx" atkbd fails to probe the keyboard
* At least 9 different Lenovo models have issues with ATKBD_CMD_GETID, see:
https://github.com/yescallop/atkbd-nogetid
This has been tested on:
1. A MSI B550M PRO-VDH WIFI desktop, where the i8042 controller is not
in translated mode when no keyboard is plugged in and with a ps/2 kbd
a "AT Translated Set 2 keyboard" /dev/input/event# node shows up
2. A Lenovo ThinkPad X1 Yoga gen 8 (always has a translated set 2 keyboard)
Observed on dmesg of my laptop I see the following
output:
[ 19.898700] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[ 19.936057] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[ 19.936076] psmouse serio1: synaptics: Your touchpad (PNP: LEN0411 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 20.008901] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640
[ 20.008925] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 20.053344] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 20.397608] mousedev: PS/2 mouse device common for all mice
This patch will add its pnp id to the smbus list to
produce the setup of intertouch for the device.
As the ring buffer recording requires cmpxchg() to work, if the
architecture does not support cmpxchg in NMI, then do not do any recording
within an NMI.
KASAN report following issue. The root cause is when opening 'hist'
file of an instance and accessing 'trace_event_file' in hist_show(),
but 'trace_event_file' has been freed due to the instance being removed.
'hist_debug' file has the same problem. To fix it, call
tracing_{open,release}_file_tr() in file_operations callback to have
the ref count and avoid 'trace_event_file' being freed.
BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278
Read of size 8 at addr ffff242541e336b8 by task head/190
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If for some reason the trace_marker write does not have a nul byte for the
string, it will overflow the print:
trace_seq_printf(s, ": %s", field->buf);
The field->buf could be missing the nul byte. To prevent overflow, add the
max size that the buf can be by using the event size and the field
location.
int max = iter->ent_size - offsetof(struct print_entry, buf);
Analyzed informations from vmcore as follows:
(1) There are about 5k+ jbd2_inode in 'commit_transaction->t_inode_list';
(2) Now is processing the 855th jbd2_inode;
(3) JBD2 task has TIF_NEED_RESCHED flag;
(4) There's no pags in address_space around the 855th jbd2_inode;
(5) There are some process is doing drop caches;
(6) Mounted with 'nodioread_nolock' option;
(7) 128 CPUs;
According to informations from vmcore we know 'journal->j_list_lock' spin lock
competition is fierce. So journal_finish_inode_data_buffers() maybe process
slowly. Theoretically, there is scheduling point in the filemap_fdatawait_range_keep_errors().
However, if inode's address_space has no pages which taged with PAGECACHE_TAG_WRITEBACK,
will not call cond_resched(). So may lead to soft lockup.
journal_finish_inode_data_buffers
filemap_fdatawait_range_keep_errors
__filemap_fdatawait_range
while (index <= end)
nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end, PAGECACHE_TAG_WRITEBACK);
if (!nr_pages)
break; --> If 'nr_pages' is equal zero will break, then will not call cond_resched()
for (i = 0; i < nr_pages; i++)
wait_on_page_writeback(page);
cond_resched();
To solve above issue, add scheduling point in the journal_finish_inode_data_buffers();
2 issues have been reported on the Dell Inspiron 7352:
1. Sometimes the tablet-mode-switch stops reporting tablet-mode
change events.
Add a "VBDL" call to notify_handler() to work around this.
2. Sometimes the tablet-mode is incorrect after suspend/resume
Add a detect_tablet_mode() to resume() to fix this.
Reported-by: Arnold Gozum <arngozum@gmail.com> Closes: https://lore.kernel.org/platform-driver-x86/87271a74-c831-4eec-b7a4-1371d0e42471@gmail.com/ Tested-by: Arnold Gozum <arngozum@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20231204150601.46976-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We are seeing cases where neigh_cleanup_and_release() is called by
neigh_forced_gc() many times in a row with preemption turned off.
When running on a low powered CPU at a low CPU frequency, this has
been measured to keep preemption off for ~10 ms. That's not great on a
system with HZ=1000 which expects tasks to be able to schedule in
with ~1ms latency.
Suggested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The connector_set contains uninitialized values when allocated with
kmalloc_array. However, in the "out" branch, the logic assumes that any
element in connector_set would be equal to NULL if failed to
initialize, which causes the bug reported by Syzbot. The fix is to use
an extra variable to keep track of how many connectors are initialized
indeed, and use that variable to decrease any refcounts in the "out"
branch.
Current jbd2 only add REQ_SYNC for descriptor block, metadata log
buffer, commit buffer and superblock buffer, the submitted IO could be
throttled by writeback throttle in block layer, that could lead to
priority inversion in some cases. The log IO looks like a kind of high
priority metadata IO, so it should not be throttled by WBT like QOS
policies in block layer, let's add REQ_SYNC | REQ_IDLE to exempt from
writeback throttle, and also add REQ_META together indicates it's a
metadata IO.
Start from ACE1.x, DOAISE is added to AC timing control
register bit 5, it combines with DOAIS to get effective
timing, and has the default value 1.
The current code fills DOAIS, DACTQE and DODS bits to a
variable initialized to zero, and updates the variable
to AC timing control register. With this operation, We
change DOAISE to 0, and force a much more aggressive
timing. The timing is even unable to form a working
waveform on SDA pin.
This patch uses read-modify-write operation for the AC
timing control register access, thus makes sure those
bits not supposed and intended to change are not touched.
Add support for a PLL rate of 292.5MHz so that the Powkiddy RGB30 panel
can run at a requested 60hz (59.96, close enough).
I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."
ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode()
we later get a wrong syscall nr. This breaks tools like execsnoop since
it relies on execve() tracepoints.
Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue.
During unwinding, unwind_done() is used as an end condition. Normally it
unwind to the user stack and then set the stack type to unknown, which
is a normal exit. When something unexpected happens in unwind process
and we cannot unwind anymore, we should set the error flag, and also set
the stack type to unknown to indicate that the unwind process can not
continue. The error flag emphasizes that the unwind process produce an
unexpected error. There is no unexpected things when we unwind the PT_REGS
in the top of IRQ stack and find out that is an user mode PT_REGS. Thus,
we should not set error flag and just set stack type to unknown.
When linked with `-pie`, GNU LD populates the `var` variable with the
pre-relocated value of `func`. However, LLVM LLD does not exhibit the
same behavior. This issue also arises with the `kernel_entry` in arch/
loongarch/kernel/head.S:
The correct kernel entry from the MS-DOS header is crucial for jumping
to vmlinux from zboot. This necessity is why the compressed relocatable
kernel compiled by Clang encounters difficulties in booting.
To address this problem, it is proposed to apply dynamic relocations to
place with `--apply-dynamic-relocs`.
It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.
Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
but the tester did not provide a Tested-by: tag] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Stop timer in the 'trigger' and 'sync_stop' callbacks since we want
the timer to be stopped before the DMA buffer is released. Otherwise,
it could trigger a kernel panic in some circumstances, for instance
when the DMA buffer is already released but the timer callback is
still running.
Fix a wrong error checking in exynos_drm_dma.c module.
In the exynos_drm_register_dma function, both arm_iommu_create_mapping()
and iommu_get_domain_for_dev() functions are expected to return NULL as
an error.
However, the error checking is performed using the statement
if(IS_ERR(mapping)), which doesn't provide a suitable error value.
So check if 'mapping' is NULL, and if it is, return -ENODEV.
Smatch reports the warning below:
drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind()
error: 'crtc' dereferencing possible ERR_PTR()
The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV),
which can not be used directly. Fix this by checking the return value
before using it.
[WHY]
Some eDP panels's ext caps don't write initial value cause the value of
dpcd_addr(0x317) is random. It means that sometimes the eDP will
clarify it is OLED, miniLED...etc cause the backlight control interface
is incorrect.
[HOW]
Add a new panel patch to remove sink ext caps(HDR,OLED...etc)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In rk3399-gru-scarlet, the bus number in the address should be 0. This is
because bus number assignment is dynamic and not known up front. For FDT,
the bus number is simply ignored.
In rk3399-gru-chromebook, the addresses are simply invalid. The first
"reg" entry must be the configuration space for the device. The entry
should be all 0s except for device/slot and function numbers. The existing
64-bit memory space (0x83000000) entries are not valid because they must
have the BAR address in the lower byte of the first cell.
Warnings for these are enabled by adding the missing 'device_type = "pci"'
for the root port node.
The reason for the hang is that nvme_reset_work occurs while nvme_scan_work
is still running. nvme_scan_work may add new ns into ctrl->namespaces
list after nvme_reset_work frozen all ns->q in ctrl->namespaces list.
The newly added ns is not frozen, so nvme_wait_freeze will wait forever.
Unfortunately, ctrl->namespaces_rwsem is held by nvme_reset_work, so
nvme_scan_work will also wait forever. Now we are deadlocked!
Fix by marking the ctrl with say NVME_CTRL_FROZEN flag set in
nvme_start_freeze and cleared in nvme_unfreeze. Then the scan can check
it before adding the new namespace (under the namespaces_rwsem).
Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com> Reviewed-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes the smatch warning, "nvmet_ns_ana_grpid_store() warn:
potential spectre issue 'nvmet_ana_group_enabled' [w] (local cap)"
Prevent the contents of kernel memory from being leaked to user space
via speculative execution by using array_index_nospec.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A different CPU may be setting the ctrl->state value, so ensure proper
barriers to prevent optimizing to a stale state. Normally it isn't a
problem to observe the wrong state as it is merely advisory to take a
quicker path during initialization and error recovery, but seeing an old
state can report unexpected ENETRESET errors when a reset request was in
fact successful.
Reported-by: Minh Hoang <mh2022@meta.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The controller state is typically written by another CPU, so reading it
should ensure no optimizations are taken. This is a repeated pattern in
the driver, so start with adding a convenience function that returns the
controller state with READ_ONCE().
When an EEH error is encountered by a PCI adapter, the EEH driver
modifies the PCI channel's state as shown below:
enum {
/* I/O channel is in normal state */
pci_channel_io_normal = (__force pci_channel_state_t) 1,
/* I/O to channel is blocked */
pci_channel_io_frozen = (__force pci_channel_state_t) 2,
/* PCI card is dead */
pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
};
If the same EEH error then causes the tg3 driver's transmit timeout
logic to execute, the tg3_tx_timeout() function schedules a reset
task via tg3_reset_task_schedule(), which may cause a race condition
between the tg3 and EEH driver as both attempt to recover the HW via
a reset action.
EEH driver gets error event
--> eeh_set_channel_state()
and set device to one of
error state above scheduler: tg3_reset_task() get
returned error from tg3_init_hw()
--> dev_close() shuts down the interface
tg3_io_slot_reset() and
tg3_io_resume() fail to
reset/resume the device
To resolve this issue, we avoid the race condition by checking the PCI
channel state in the tg3_reset_task() function and skip the tg3 driver
initiated reset when the PCI channel is not in the normal state. (The
driver has no access to tg3 device registers at this point and cannot
even complete the reset task successfully without external assistance.)
We'll leave the reset procedure to be managed by the EEH driver which
calls the tg3_io_error_detected(), tg3_io_slot_reset() and
tg3_io_resume() functions as appropriate.
Adding the same checking in tg3_dump_state() to avoid dumping all
device registers when the PCI channel is not in the normal state.
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com> Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com> Reviewed-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix up the order that the device and negotiated features
are checked to get a more reliable difference when things
get changed.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-4-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the client driver is setting status to 0, something is
getting shutdown and possibly removed. Make sure we clear
the config_cb so that it doesn't end up crashing when
trying to call a bogus callback.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-3-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Our friendly kernel test robot has recently been pointing out
some format-truncation issues. Here's a fix for one of them.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311040109.RfgJoE7L-lkp@intel.com/ Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-2-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current driver is registering the same dais for each hdev found in the
system which results duplicated widgets to be registered and the kernel
log contains similar prints:
snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
To avoid such issue, split the dai array into HDMI and non HDMI array and
register them conditionally:
for HDMI hdev only register the dais needed for HDMI
for non HDMI hdev do not register the HDMI dais.
This is a hack around a bug exposed with the GSP code, I'm not sure
what is happening exactly, but it appears some of our flushes don't
result in proper tlb invalidation for out BAR2 and we get a BAR2
fault from GSP and it all dies.
In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.
The relation of phy clock is:
sai_pll_ref_sel
sai_pll
sai_pll_bypass
sai_pll_out
sai_pll_out_div2
earc_phy_cg
The bit 10 in TX_DPTH_CTRL register controls the TX clock rate.
If this bit is set, TX datapath clock should be = 2* TX bit rate.
If this bit is not set, TX datapath clock should be 10* TX bit rate.
As the spdif only case, we always use 2 * TX bit clock, so
this bit need to be set.
skl_platform_register() uses krealloc. When krealloc is fail,
then previous memory is not freed. The leak is also when soc
component registration failed.
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:
sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment
sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short
sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/ Signed-off-by: David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The expected name by the binding at this position is "msg" and the SoC's
manual also calls the interrupt in question "msg", so fix the rk356x dtsi
to use the correct name.
Bit 6 of INPPGA (INPPGAMUTE) does not control the Aux path, it controls
the input PGA path, as can been seen from Figure 8 Input Boost Stage in
the datasheet. Update the naming of things in the driver to match this
and update the routing to also reflect this.
Handle the trace interrupt in the hardirq context, make sure the irq
core won't threaded it by declaring IRQF_NO_THREAD and userspace won't
balance it by declaring IRQF_NOBALANCING. Otherwise we may violate the
synchronization requirements of the perf core, referenced to the
change of arm-ccn PMU
commit 0811ef7e2f54 ("bus: arm-ccn: fix PMU interrupt flags").
In the interrupt handler we mainly doing 2 things:
- Copy the data from the local DMA buffer to the AUX buffer
- Commit the data in the AUX buffer
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Fixed commit description to suppress checkpatch warning ] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20231010084731.30450-3-yangyicong@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The block layer doesn't support logical block sizes smaller than 512
bytes. The nvme spec doesn't support that small either, but the driver
isn't checking to make sure the device responded with usable data.
Failing to catch this will result in a kernel bug, either from a
division by zero when stacking, or a zero length bio.
Request queue quiesce may interrupt flush sequence, and the original request
may have been marked as COMPLETE, but can't get finished because of
queue quiesce.
This way is fine from driver viewpoint, because flush sequence is block
layer concept, and it isn't related with driver.
However, driver(such as dm-rq) can call blk_mq_queue_inflight() to count &
drain inflight requests, then the wait & drain never gets done because
the completed & not-finished flush request is counted as inflight.
Fix this issue by not counting completed flush data request as inflight in
case of quiesce.
Cc: Mike Snitzer <snitzer@kernel.org> Cc: David Jeffery <djeffery@redhat.com> Cc: John Pittman <jpittman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231201085605.577730-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
These helper functions are needed for KFD to export and import DMABufs
the right way without duplicating the tracking of DMABufs associated with
GEM objects while ensuring that move notifier callbacks are working as
intended.
CC: Christian König <christian.koenig@amd.com> CC: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When compiling with gcc version 14.0.0 20231126 (experimental)
and CONFIG_FORTIFY_SOURCE=y, I've noticed the following:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/smb/client/smb2pdu.c:18:
In function 'fortify_memcpy_chk',
inlined from '__SMB2_close' at fs/smb/client/smb2pdu.c:3480:4:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/smb/client/cifssmb.c:17:
In function 'fortify_memcpy_chk',
inlined from 'CIFS_open' at fs/smb/client/cifssmb.c:1248:3:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In both cases, the fortification logic inteprets calls to 'memcpy()' as an
attempts to copy an amount of data which exceeds the size of the specified
field (i.e. more than 8 bytes from __le64 value) and thus issues an overread
warning. Both of these warnings may be silenced by using the convenient
'struct_group()' quirk.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init
'didt_rreg' and 'didt_wreg' to 'NULL'. But in func
'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT'
lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use
these two definitions won't be added for 'AMDGPU_FAMILY_SI'.
So, add null pointer judgment before calling.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lu Yao <yaolu@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
KFD_GC_VERSION was recently updated to use a new function
for IP version checks. As a result, use KFD_GC_VERSION as
the common function for all IP version checks in KFD.
Commit 1b0a151c10a6 ("blk-core: use pr_warn_ratelimited() in
bio_check_ro()") fix message storm by limit the rate, however, there
will still be lots of message in the long term. Fix it better by warn
once for each partition.
Normally within a syscall it's fine to use fdget/fdput for grabbing a
file from the file table, and it's fine within io_uring as well. We do
that via io_uring_enter(2), io_uring_register(2), and then also for
cancel which is invoked from the latter. io_uring cannot close its own
file descriptors as that is explicitly rejected, and for the cancel
side of things, the file itself is just used as a lookup cookie.
However, it is more prudent to ensure that full references are always
grabbed. For anything threaded, either explicitly in the application
itself or through use of the io-wq worker threads, this is what happens
anyway. Generalize it and use fget/fput throughout.
When looking up DMIC blob from the NHLT table and the format is 32 bits,
ignore the vbps matching for 32 bps for DMIC since some NHLT table have
the vbps as 24, some have it as 32.
The DMIC hardware supports only one type of 32 bit sample size, which is
24 bit sampling on the MSB side and bits[1:0] is used for indicating the
channel number.
projects / thirdparty / kernel / stable.git / log
