When saa7146_register_device and saa7146_vv_init fails, budget_av_attach
should free the resources it allocates, like the error-handling of
ttpci_budget_init does. Besides, there are two fixme comment refers to
such deallocations.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
A previous patch worked around a KASAN issue in stv0367, now a similar
problem showed up with clang:
drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than]
1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe)
Rework the stv0367_writereg() function to be simpler and mark both
register access functions as noinline_for_stack so the temporary
i2c_msg structures do not get duplicated on the stack when KASAN_STACK
is enabled.
[Syzbot reported]
BUG: KASAN: slab-use-after-free in pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35
Read of size 4 at addr ffff888113aeb0d8 by task kworker/1:1/26
[Analyze]
Task A set disconnect_flag = !0, which resulted in Task B's condition being met
and releasing mp, leading to this issue.
[Fix]
Place the disconnect_flag assignment operation after all code in pvr2_context_disconnect()
to avoid this issue.
Reported-and-tested-by: syzbot+ce750e124675d4599449@syzkaller.appspotmail.com Fixes: e5be15c63804 ("V4L/DVB (7711): pvrusb2: Fix race on module unload") Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Missing break statement in the ATOM_ARG_IMM case of a switch statement,
adds the missing break statement, ensuring that the program's control
flow is as intended.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/atom.c:323 atom_get_src_int() warn: ignoring unreachable code.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Cc: Jammy Zhou <Jammy.Zhou@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
HP ProBook x360 435 G7 using older version of firmware which doesn't
support disabling the interrupt for all commands. Hence avoid disabling
the interrupt for that particular model.
HPD sensor data is not populating properly because of wrong order of HPD
sensor structure elements. So update the order of structure elements to
match the HPD sensor data received from the firmware.
The if condition for the SM8[45]50 GPU SMMU is too large,
add the other compatible strings to the condition to only
allow the clocks for the GPU SMMU nodes.
Fixes: 4fff78dc2490 ("dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU") Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/578686/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Historically the Adreno driver has not been updating memory
configuration registers on a618 (SC7180 platform) implying that the
default configuration is fine. After the rework performed in the commit 8814455a0e54 ("drm/msm: Refactor UBWC config setting") the function
a6xx_calc_ubwc_config() still contained this shortcut and did not
calculate UBWC configuration. However the function which now actually
updates hardware registers, a6xx_set_ubwc_config(), doesn't contain such
check.
Rather than adding the check to a6xx_set_ubwc_config(), fill in the
UBWC config for a618 (based on readings from SC7180).
According to Amlogic datasheets for the SoCs supported by this driver, the
maximum bit clock rate is 100MHz.
The tdm interface allows the rates listed by the DAI driver, regardless of
the number slots or their width. However, these will impact the bit clock
rate.
Hitting the 100MHz limit is very unlikely for most use cases but it is
possible.
For example with 32 slots / 32 bits wide, the maximum rate is no longer
384kHz but ~96kHz.
Add the constraint accordingly if the component is not already active.
If it is active, the rate is already constrained by the first stream rate.
By default, when mclk-fs is not provided, the tdm-interface driver
requests an MCLK that is 4x the bit clock, SCLK.
However there is no justification for this:
* If the codec needs MCLK for its operation, mclk-fs is expected to be set
according to the codec requirements.
* If the codec does not need MCLK the minimum is 2 * SCLK, because this is
minimum the divider between SCLK and MCLK can do.
Multiplying by 4 may cause problems because the PLL limit may be reached
sooner than it should, so use 2x instead.
mtd-ram can potentially be larger than 4GB. get_bitmask_order() uses
fls() that is not guaranteed to work with values larger than 32-bit.
Specifically on aarch64 fls() returns 0 when all 32 LSB bits are clear.
Use fls64() instead.
There is SAI1, SAI2, SAI3, SAI5, SAI6, SAI7 existing in this block
control, the order is discontinuous. The definition of SAI_MCLK_SEL(n)
is not match with the usage of CLK_SAIn(n).
So define SAI##n##_MCLK_SEL separately to fix the issue.
Fixes: 6cd95f7b151c ("clk: imx: imx8mp: Add audiomix block control") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1708683351-8504-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A sync lost issue can be observed with two displays, when moving a plane
from one disabled display to an another disabled display, and then
enabling the display to which the plane was moved to. The exact
requirements for this to trigger are not clear.
It looks like the issue is that the layers are left enabled in the first
display's OVR registers. Even if the corresponding VP is disabled, it
still causes an issue, as if the disabled VP and its OVR would still be
in use, leading to the same VID being used by two OVRs. However, this is
just speculation based on testing the DSS behavior.
Experimentation shows that as a workaround, we can disable all the
layers in the OVR when disabling a VP. There should be no downside to
this, as the OVR is anyway effectively disabled if its VP is disabled,
and it seems to solve the sync lost issue.
However, there may be a bigger issue in play here, related to J721e
erratum i2097 ("DSS: Disabling a Layer Connected to Overlay May Result
in Synclost During the Next Frame"). Experimentation also shows that the
OVR's CHANNELIN field has similar issue. So we may need to revisit this
when we find out more about the core issue.
When the driver sets up the zpos property it sets the default zpos value
to the HW id of the plane. That is fine as such, but as on many DSS
versions the driver arranges the DRM planes in a different order than
the HW planes (to keep the non-scalable planes first), this leads to odd
initial zpos values. An example is J721e, where the initial zpos values
for DRM planes are 1, 3, 0, 2.
In theory the userspace should configure the zpos values properly when
using multiple planes, and in that sense the initial zpos values
shouldn't matter, but there's really no reason not to fix this and help
the userspace apps which don't handle zpos perfectly. In particular,
some versions of Weston seem to have issues dealing with the planes
with the current default zpos values.
So let's change the zpos values for the DRM planes to 0, 1, 2, 3.
Another option would be to configure the planes marked as primary planes
to zpos 0. On a two display system this would give us plane zpos values
of 0, 0, 1, 2. The end result and behavior would be very similar in this
option, and I'm not aware that this would actually help us in any way.
So, to keep the code simple, I opted for the 0, 1, 2, 3 values.
If a device is configured for data compression chaining (dcc), half of the
engines are loaded with the symmetric crypto image and the rest are loaded
with the compression image.
However, in such configuration all rings can handle compression requests.
Fix the ring to service mapping so that when a device is configured for
dcc, the ring to service mapping reports that all rings in a bank can
be used for compression.
Fixes: fcf60f4bcf54 ("crypto: qat - add support for 420xx devices") Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a device is configured for data compression chaining (dcc), half of the
engines are loaded with the symmetric crypto image and the rest are loaded
with the compression image.
However, in such configuration all rings can handle compression requests.
Fix the ring to service mapping so that when a device is configured for
dcc, the ring to service mapping reports that all rings in a bank can
be used for compression.
Fixes: a238487f7965 ("crypto: qat - fix ring to service map for QAT GEN4") Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is to fix the following warning when compiling the QAT driver
using clang scan-build:
drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c:1010:6: warning: Value stored to 'reg' during its initialization is never read [deadcode.DeadStores]
1010 | u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SSMCPPERR);
| ^~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c:1109:6: warning: Value stored to 'reg' during its initialization is never read [deadcode.DeadStores]
1109 | u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SER_ERR_SSMSH);
| ^~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 99b1c9826e48 ("crypto: qat - count QAT GEN4 errors") Signed-off-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check if delta_us is not zero and return -EINVAL if it is.
delta_us is unlikely to be zero as there is a sleep between the reads of
the two timestamps.
This is to fix the following warning when compiling the QAT driver
using clang scan-build:
drivers/crypto/intel/qat/qat_common/adf_clock.c:87:9: warning: Division by zero [core.DivideZero]
87 | temp = DIV_ROUND_CLOSEST_ULL(temp, delta_us);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: e2980ba57e79 ("crypto: qat - add measure clock frequency") Signed-off-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
drivers/crypto/intel/qat/qat_common/adf_cnv_dbgfs.c:19:9: warning: macro is not used [-Wunused-macros]
19 | #define CNV_SLICE_ERR_MASK GENMASK(7, 0)
| ^
Fixes: d807f0240c71 ("crypto: qat - add cnv_errors debugfs file") Signed-off-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
As a result of the removal of qat_zlib_deflate, some defines where not
removed. Remove them.
This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:21:9: warning: macro is not used [-Wunused-macros]
21 | #define QAT_RFC_1950_CM_OFFSET 4
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:16:9: warning: macro is not used [-Wunused-macros]
16 | #define QAT_RFC_1950_HDR_SIZE 2
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:17:9: warning: macro is not used [-Wunused-macros]
17 | #define QAT_RFC_1950_FOOTER_SIZE 4
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:22:9: warning: macro is not used [-Wunused-macros]
22 | #define QAT_RFC_1950_DICT_MASK 0x20
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:18:9: warning: macro is not used [-Wunused-macros]
18 | #define QAT_RFC_1950_CM_DEFLATE 8
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:20:9: warning: macro is not used [-Wunused-macros]
20 | #define QAT_RFC_1950_CM_MASK 0x0f
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:23:9: warning: macro is not used [-Wunused-macros]
23 | #define QAT_RFC_1950_COMP_HDR 0x785e
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:19:9: warning: macro is not used [-Wunused-macros]
19 | #define QAT_RFC_1950_CM_DEFLATE_CINFO_32K 7
| ^
Fixes: e9dd20e0e5f6 ("crypto: qat - Remove zlib-deflate") Signed-off-by: Adam Guerin <adam.guerin@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Errors can potentially occur in the "processing" of PSP commands or
commands can be processed successfully but still return an error code in
the header.
This second case was being discarded because PSP communication worked but
the command returned an error code in the payload header.
Capture both cases and return them to the caller as -EIO for the caller
to investigate. The caller can detect the latter by looking at
`req->header->status`.
Reported-and-tested-by: Tim Van Patten <timvp@google.com> Fixes: 7ccc4f4e2e50 ("crypto: ccp - Add support for an interface for platform features") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
clang-16 warns about casting between incompatible function types:
arch/arm/crypto/sha256_glue.c:37:5: error: cast from 'void (*)(u32 *, const void *, unsigned int)' (aka 'void (*)(unsigned int *, const void *, unsigned int)') to 'sha256_block_fn *' (aka 'void (*)(struct sha256_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
37 | (sha256_block_fn *)sha256_block_data_order);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/crypto/sha512-glue.c:34:3: error: cast from 'void (*)(u64 *, const u8 *, int)' (aka 'void (*)(unsigned long long *, const unsigned char *, int)') to 'sha512_block_fn *' (aka 'void (*)(struct sha512_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
34 | (sha512_block_fn *)sha512_block_data_order);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the prototypes for the assembler functions to match the typedef.
The code already relies on the digest being the first part of the
state structure, so there is no change in behavior.
Fixes: c80ae7ca3726 ("crypto: arm/sha512 - accelerated SHA-512 using ARM generic ASM and NEON") Fixes: b59e2ae3690c ("crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the perf tool doesn't detect support for extended event types
on Apple M1/M2 systems, and will not auto-expand plain PERF_EVENT_TYPE
hardware events into per-PMU events. This is due to the detection of
extended event types not handling mandatory filters required by the
M1/M2 PMU driver.
PMU drivers and the core perf_events code can require that
perf_event_attr::exclude_* filters are configured in a specific way and
may reject certain configurations of filters, for example:
(a) Many PMUs lack support for any event filtering, and require all
perf_event_attr::exclude_* bits to be clear. This includes Alpha's
CPU PMU, and ARM CPU PMUs prior to the introduction of PMUv2 in
ARMv7,
(b) When /proc/sys/kernel/perf_event_paranoid >= 2, the perf core
requires that perf_event_attr::exclude_kernel is set.
(c) The Apple M1/M2 PMU requires that perf_event_attr::exclude_guest is
set as the hardware PMU does not count while a guest is running (but
might be extended in future to do so).
In is_event_supported(), we try to account for cases (a) and (b), first
attempting to open an event without any filters, and if this fails,
retrying with perf_event_attr::exclude_kernel set. We do not account for
case (c), or any other filters that drivers could theoretically require
to be set.
Thus is_event_supported() will fail to detect support for any events
targeting an Apple M1/M2 PMU, even where events would be supported with
perf_event_attr:::exclude_guest set.
Since commit:
82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
... we use is_event_supported() to detect support for extended types,
with the PMU ID encoded into the perf_event_attr::type. As above, on an
Apple M1/M2 system this will always fail to detect that the event is
supported, and consequently we fail to detect support for extended types
even when these are supported, as they have been since commit:
Due to this, the perf tool will not automatically expand plain
PERF_TYPE_HARDWARE events into per-PMU events, even when all the
necessary kernel support is present.
This patch updates is_event_supported() to additionally try opening
events with perf_event_attr::exclude_guest set, allowing support for
events to be detected on Apple M1/M2 systems. I believe that this is
sufficient for all contemporary CPU PMU drivers, though in future it may
be necessary to check for other combinations of filter bits.
I've deliberately changed the check to not expect a specific error code
for missing filters, as today ;the kernel may return a number of
different error codes for missing filters (e.g. -EACCESS, -EINVAL, or
-EOPNOTSUPP) depending on why and where the filter configuration is
rejected, and retrying for any error is more robust.
Note that this does not remove the need for commit:
a24d9d9dc096fc0d ("perf parse-events: Make legacy events lower priority than sysfs/JSON")
... which is still necessary so that named-pmu/event/ events work on
kernels without extended type support, even if the event name happens to
be the same as a PERF_EVENT_TYPE_HARDWARE event (e.g. as is the case for
the M1/M2 PMU's 'cycles' and 'instructions' events).
Fixes: 82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Ian Rogers <irogers@google.com> Tested-by: James Clark <james.clark@arm.com> Tested-by: Marc Zyngier <maz@kernel.org> Cc: Hector Martin <marcan@marcan.st> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mike Leach <mike.leach@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240126145605.1005472-1-mark.rutland@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_parse_phandle() returns a device_node with refcount incremented, which
the callee needs to call of_node_put() on when done. We should only call
of_node_put() when the property argument is provided though as otherwise
nothing has taken a reference on the node.
Fixes: f36e789a1f8d ("mfd: altera-sysmgr: Add SOCFPGA System Manager") Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20240220115012.471689-4-peter.griffin@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_parse_phandle() returns a device_node with refcount incremented, which
the callee needs to call of_node_put() on when done. We should only call
of_node_put() when the property argument is provided though as otherwise
nothing has taken a reference on the node.
Fixes: 45330bb43421 ("mfd: syscon: Allow property as NULL in syscon_regmap_lookup_by_phandle") Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20240220115012.471689-2-peter.griffin@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch swaps SINK and SOURCE pads of the MEI CSI sub-device. While
this does change the UAPI by swapping the pads, the driver has never been
usable in upstream kernel as the Intel IPU6 driver it depends on any
functionality has not yet been merged.
mips_ejtag_fdc_encode() method expects having a first argument passed of
the "u8 **" type, meanwhile the driver passes the "const char **" type.
That causes the next build-warning:
drivers/tty/mips_ejtag_fdc.c: In function ‘mips_ejtag_fdc_console_write’:
drivers/tty/mips_ejtag_fdc.c:343:32: error: passing argument 1 of ‘mips_ejtag_fdc_encode’ from incompatible pointer type [-Werror=incompatible-pointer-types]
word = mips_ejtag_fdc_encode(&buf_ptr, &buf_len, 1);
^
drivers/tty/mips_ejtag_fdc.c:216:24: note: expected ‘const u8 ** {aka const unsigned char **}’ but argument is of type ‘const char **’
static struct fdc_word mips_ejtag_fdc_encode(const u8 **ptrs,
^~~~~~~~~~~~~~~~~~~~~
Fix it by altering the type of the pointer which is passed to the
mips_ejtag_fdc_encode() method.
Fixes: ce7cbd9a6c81 ("tty: mips_ejtag_fdc: use u8 for character pointers") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Inside tegra_fb_create(), drm_gem_object_lookup() increments ref count of
the found object. But if the following size check fails then the last
found object's ref count should be put there as the unreferencing loop
can't detect this situation.
Found by Linux Verification Center (linuxtesting.org).
Without the SGM_REG_SEL clock enabled the cpu freezes if trying to
access registers used by MT7981 clock drivers itself.
Mark SGM_REG_SEL as critical to make sure it is always enabled to
prevent freezes on boot even if the Ethernet driver which prepares
and enables the clock is not loaded or probed at a later point.
CLK_INFRA_SSPM_32K_SELF has the "f_f26m_ck" clock assigned as its parent.
This is inconsistent as the clock is part of a group that are all gates
without dividers, and this makes the kernel think it runs at 26 MHz.
After clarification from MediaTek engineers, the correct parent is
actually the system 32 KHz clock.
Fixes: 1eb8d61ac5c9 ("clk: mediatek: mt8183: Add back SSPM related clocks") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20240219105125.956278-1-wenst@chromium.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Per PCIe r6.1, sec 2.2.6.2 and 7.5.3.4, a Requester may not use 8-bit Tags
unless its Extended Tag Field Enable is set, but all Receivers/Completers
must handle 8-bit Tags correctly regardless of their Extended Tag Field
Enable.
Some devices do not handle 8-bit Tags as Completers, so add a quirk for
them. If we find such a device, we disable Extended Tags for the entire
hierarchy to make peer-to-peer DMA possible.
The 3ware 9650SE seems to have issues with handling 8-bit tags. Mark it as
broken.
The register bits definitions for RGB666 formats are wrong in multiple
ways: first, in the DSI_PS_SEL bits region, the Packed 18-bits RGB666
format is selected with bit 1, while the Loosely Packed one is bit 2,
and second - the definition name "LOOSELY_PS_18BIT_RGB666" is wrong
because the loosely packed format is 24 bits instead!
Either way, functions mtk_dsi_ps_control_vact() and mtk_dsi_ps_control()
do not even agree on the DSI_PS_SEL bit to set in DSI_PSCTRL: one sets
loosely packed (24) on RGB666, the other sets packed (18), and the other
way around for RGB666_PACKED.
Fixing this entire stack of issues is done in one go:
- Use the correct bit for the Loosely Packed RGB666 definition
- Rename LOOSELY_PS_18BIT_RGB666 to LOOSELY_PS_24BIT_RGB666
- Change ps_bpp_mode in mtk_dsi_ps_control_vact() to set:
- Loosely Packed, 24-bits for MIPI_DSI_FMT_RGB666
- Packed, 18-bits for MIPI_DSI_FMT_RGB666_PACKED
The panel on sc7180-trogdor-wormdingler and
sc7180-trogdor-quackingstick hasn't been coming up since commit 9e15123eca79 ("drm/msm/dsi: Stop unconditionally powering up DSI hosts
at modeset"). Let's add "prepare_prev_first" as has been done for many
other DSI panels.
In the first if statement, we're checking if 'replay' is NULL. But in
the second if statement, we're not checking if 'replay' is NULL again
before calling replay->funcs->replay_set_power_opt().
If 'replay' is NULL, this will cause a null pointer dereference.
Fixes the below found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887)
Fixes: c7ddc0a800bc ("drm/amd/display: Add Functions to enable Freesync Panel Replay") Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Suggested-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently coefficients are applied only once, since they don't change.
However, this is done before enable bit is set and thus it doesn't get
applied properly.
Fix that by applying coefficients after enable bit is set. While this
means that it will be done evey time, it doesn't bring much time
penalty.
bit_size field holds size of slice, not slice + header. Because of HW
quirks, driver can't program in just slice, but also preceding header.
But that means that currently used bit_size is wrong (too small).
Instead, just use size of whole buffer. There is no harm in doing this.
If device_register() fails in ntb_register_device(), the device name
allocated by dev_set_name() should be freed. As per the comment in
device_register(), callers should use put_device() to give up the
reference in the error path. So fix this by calling put_device() in the
error path so that the name can be freed in kobject_cleanup().
As a result of this, put_device() in the error path of
ntb_register_device() is removed and the actual error is returned.
If the ADV7511 bridge driver is compiled as a module, while DRM_MSM is
built-in, the clk_disable_unused congests with the runtime PM handling
of the DSI PHY for the clk_prepare_lock(). This causes apq8016 runner to
fail without completing any jobs ([1]). Drop the BM_CMDLINE which
duplicate the command line from the .baremetal-igt-arm64 clause and
enforce the clk_ignore_unused kernelarg instead to make apq8016 runner
work.
Smatch complains about "head->full_size - head->header_size" can
underflow. To some extent, we're always going to have to trust the
firmware a bit. However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well.
Fixes: d2458baa799f ("ASoC: SOF: ipc3-loader: Implement firmware parsing and loading") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://msgid.link/r/5593d147-058c-4de3-a6f5-540ecb96f6f8@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
arch_vmap_pud_supported() and arch_vmap_pmd_supported() are
expected to constant-fold to false when RADIX is not enabled.
Force inlining in order to avoid following failure which
leads to unexpected call of non-existing pud_set_huge() and
pmd_set_huge() on powerpc 8xx.
In function 'pud_huge_tests',
inlined from 'debug_vm_pgtable' at mm/debug_vm_pgtable.c:1399:2:
./arch/powerpc/include/asm/vmalloc.h:9:33: warning: inlining failed in call to 'arch_vmap_pud_supported.isra': call is unlikely and code size would grow [-Winline]
9 | #define arch_vmap_pud_supported arch_vmap_pud_supported
| ^~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/vmalloc.h:10:20: note: in expansion of macro 'arch_vmap_pud_supported'
10 | static inline bool arch_vmap_pud_supported(pgprot_t prot)
| ^~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/vmalloc.h:9:33: note: called from here
9 | #define arch_vmap_pud_supported arch_vmap_pud_supported
mm/debug_vm_pgtable.c:458:14: note: in expansion of macro 'arch_vmap_pud_supported'
458 | if (!arch_vmap_pud_supported(args->page_prot) ||
| ^~~~~~~~~~~~~~~~~~~~~~~
clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:
sound/soc/meson/t9015.c:274:4: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
274 | (void(*)(void *))clk_disable_unprepare,
The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.
clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:
sound/soc/meson/aiu.c:243:12: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
243 | (void(*)(void *))clk_disable_unprepare,
The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.
Counts were switched from the scaled saved value form to the
aggregated count to avoid double accounting. When this happened the
removing of scaling for a count should have been removed, however, it
wasn't and this wasn't observed as it normally doesn't matter because
a counter's scale is 1. A problem was observed with RAPL events that
are scaled.
Fixes: 37cc8ad77cf8 ("perf metric: Directly use counts rather than saved_value") Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Kaige Ye <ye@kaige.org> Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240209204947.3873294-5-irogers@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Cycles is recognized as part of a hard coded metric in stat-shadow.c,
it may call print_metric_only with a NULL fmt string leading to a
segfault. Handle the NULL fmt explicitly.
Fixes: 088519f318be ("perf stat: Move the display functions to stat-display.c") Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Kaige Ye <ye@kaige.org> Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240209204947.3873294-4-irogers@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Events in metrics cannot use '/' as a separator, it would be
recognized as a divide, so they use '@'. The '@' is recognized in the
metricgroups code and changed to '/', do the same in the has_event
function so that the parsing is only tried without the @s.
Fixes: 4a4a9bf9075f ("perf expr: Add has_event function") Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Kaige Ye <ye@kaige.org> Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240209204947.3873294-3-irogers@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL
before the call to dc_enable_dmub_notifications(), check
beforehand to ensure there will not be a possible NULL-ptr-deref
there.
Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop
CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in
'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy().
Clean up by combining them all under one 'if'.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the topology calls for two interfaces on the current fixed topology
of 2 DSC blocks, or uses 1 DSC block for a single interface (e.g. SC7280
with only one DSC block), there should be no merging of DSC output.
This is already represented by the return value of
dpu_encoder_use_dsc_merge(), but not yet used to correctly configure
this flag.
Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577067/ Link: https://lore.kernel.org/r/20240204-dpu-dsc-multiplex-v1-1-080963233c52@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently INTF_CFG2_DATA_HCTL_EN is coupled with the enablement
of widebus but this is incorrect because we should be enabling
this bit independent of widebus except for cases where compression
is enabled in one pixel per clock mode.
Fix this by making the condition checks more explicit and enabling
INTF_CFG2_DATA_HCTL_EN for all other cases when supported by DPU.
The child_process for addr2line sets in and out to -1 so that pipes
get created. It is the caller's responsibility to close the pipes,
finish_command doesn't do it. Add the missed closes.
Fixes: b3801e791231 ("perf srcline: Simplify addr2line subprocess") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Tom Rix <trix@redhat.com> Cc: llvm@lists.linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240201001504.1348511-8-irogers@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit in Fixes changed the logic on how resources are released and
introduced a new switchtec_exit_pci() that need to be called explicitly in
order to undo a corresponding switchtec_init_pci().
This was done in the remove function, but not in the probe.
Dquots pointed to from i_dquot arrays in inodes are protected by
dquot_srcu. Annotate them as such and change .get_dquots callback to
return properly annotated pointer to make sparse happy.
Fixes: b9ba6f94b238 ("quota: remove dqptr_sem") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Dquot pointers in i_dquot array in the inode are protected by
dquot_srcu. Annotate the array pointers with __rcu, perform the locked
dereferences with srcu_dereference_check() instead of plain reads, and
set the array elements with rcu_assign_pointer().
Fixes: b9ba6f94b238 ("quota: remove dqptr_sem") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402061900.rTuYDlo6-lkp@intel.com/ Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
If dquot_free_inode(or other routines) checks inode's quota pointers (1)
before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer
dereference will be triggered.
So let's fix it by using a temporary pointer to avoid this issue.
Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240202081852.2514092-1-wangjianjian3@huawei.com>
Stable-dep-of: 179b8c97ebf6 ("quota: Fix rcu annotations of inode dquot pointers") Signed-off-by: Sasha Levin <sashal@kernel.org>
Trying to toggle the resets in a rapid fashion can lead to the changes
not actually arriving at the clock controller block when we expect them
to. This was observed at least on SM8250.
Read back the value after regmap_update_bits to ensure write completion.
The issue arises when the array 'adev->vcn.vcn_config' is accessed
before checking if the index 'adev->vcn.num_vcn_inst' is within the
bounds of the array.
The fix involves moving the bounds check before the array access. This
ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array
before it is used as an index.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use.
Fixes: a0ccc717c4ab ("drm/amdgpu/discovery: validate VCN and SDMA instances") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MT8192 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.
Drop the bogus setting.
Fixes: d32f38f2a8fc ("pinctrl: mediatek: Add pinctrl driver for mt8192") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240131071910.3950450-2-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MT8186 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.
Drop the bogus setting.
Fixes: 8b483bda1e46 ("pinctrl: add pinctrl driver on mt8186") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240131071910.3950450-1-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed
in several error-handling paths. However, *pdvbdev is not set to NULL
after dvbdev's deallocation, causing use-after-frees in many places,
for example, in the following call chain:
When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in
dvb_register_device) could point to memory that had been freed in
dvb_register_device. Thereafter, this pointer is transferred to
kref_put and triggering a use-after-free.
According to the datasheets, the ESMT chips in question will return a 5
byte long identification code where the last 3 bytes are the JEDEC
continuation codes (7Fh). Although, I would have expected 4 continuation
codes as Powerchip Semiconductor (C8h, corresponding to the parameter
page data) is located in bank 5 of the JEDEC database.
By matching the full 5 bytes we can avoid clashes with GigaDevice NAND
flashes.
This fix allows the MT7688-based GARDENA smart Gateway to boot again.
Fixes: aa08bf187f32 ("mtd: spinand: esmt: add support for F50D2G41KA") Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com> Reviewed-by: Martin Kurbanov <mmkurbanov@salutedevices.com> Tested-by: Martin Kurbanov <mmkurbanov@salutedevices.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240125200108.24374-3-ezra@easyb.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
The port@0 node doesn't define any extra properties in the port or endpoint
nodes, so the $ref should be to "/properties/port" instead as it restricts
extra properties.
Fixes: 0f82ffa9a295 ("media: dt-bindings: media: i2c: Add bindings for TW9900") Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity
but isn't freed in its following error-handling paths. This patch
adds such deallocation to prevent memleak of entity->name.
Fixes: be2fff656322 ("media: add helpers for memory-to-memory media controller") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
In tpg_alloc, resources should be deallocated in each and every
error-handling paths, since they are allocated in for statements.
Otherwise there would be memleaks because tpg_free is called only when
tpg_alloc return 0.
Fixes: 63881df94d3e ("[media] vivid: add the Test Pattern Generator") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Static analyzers generate alerts for an unchecked call to
`media_device_register()`. However, in this case, the device will work
reliably without the media controller API.
Add a comment above the call to prevent future unnecessary changes.
When building perf with BPF skels we either copy the minimalistic
tools/perf/util/bpf_skel/vmlinux/vmlinux.h or use bpftool to generate a
vmlinux from BTF, storing the result in $(SKEL_OUT)/vmlinux.h.
We need to remove that when doing a 'make -C tools/perf clean', fix it.
Fixes: b7a2d774c9c5a9a3 ("perf build: Add ability to build with a generated vmlinux.h") Reviewed-by: Ian Rogers <irogers@google.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: bpf@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/Zbz89KK5wHfZ82jv@x1 Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
