All EP specific resources are enabled during PERST# deassert. As a counter
operation, all resources should be disabled during PERST# assert. There is
no point in skipping that if the link was not enabled.
This will also result in enablement of the resources twice if PERST# got
deasserted again. So remove the check from qcom_pcie_perst_assert() and
disable all the resources unconditionally.
Introduce div_offset field in en_clk_desc struct in order to fix rate
divider estimation in en7523_get_div routine for slic and spi fixed
rate clocks.
Moreover, fix base_shift for crypto clock.
Fixes: 1e6273179190 ("clk: en7523: Add clock driver for Airoha EN7523 SoC") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c491bdea05d847f1f1294b94f14725d292eb95d0.1718615934.git.lorenzo@kernel.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The first problem is that they incorrectly report the parent after
commit 703db1f5da1e ("clk: qcom: rcg2: Cache CFG register updates for
parked RCGs"). That's because the cached CFG register value needs to be
populated when the clk is registered. clk_rcg2_shared_enable() writes
the cached CFG register value 'parked_cfg'. This value is initially zero
due to static initializers. If a driver calls clk_enable() before
setting a rate or parent, it will set the parent to '0' which is
(almost?) always XO, and may not reflect the parent at registration. In
the worst case, this switches the RCG from sourcing a fast PLL to the
slow crystal speed.
The second problem is that the force enable bit isn't cleared. The force
enable bit is only used during parking and unparking of shared RCGs.
Otherwise it shouldn't be set because it keeps the RCG enabled even when
all the branches on the output of the RCG are disabled (the hardware has
a feedback mechanism so that any child branches keep the RCG enabled
when the branch enable bit is set). This problem wastes power if the clk
is unused, and is harmful in the case that the clk framework disables
the parent of the force enabled RCG. In the latter case, the GDSC the
shared RCG is associated with will get wedged if the RCG's source clk is
disabled and the GDSC tries to enable the RCG to do "housekeeping" while
powering on.
Both of these problems combined with incorrect runtime PM usage in the
display driver lead to a black screen on Qualcomm sc7180 Trogdor
chromebooks. What happens is that the bootloader leaves the
'disp_cc_mdss_rot_clk' enabled and the 'disp_cc_mdss_rot_clk_src' force
enabled and parented to 'disp_cc_pll0'. The mdss driver probes and
runtime suspends, disabling the mdss_gdsc which uses the
'disp_cc_mdss_rot_clk_src' for "housekeeping". The
'disp_cc_mdss_rot_clk' is disabled during late init because the clk is
unused, but the parent 'disp_cc_mdss_rot_clk_src' is still force enabled
because the force enable bit was never cleared. Then 'disp_cc_pll0' is
disabled because it is also unused. That's because the clk framework
believes the parent of the RCG is XO when it isn't. A child device of
the mdss device (e.g. DSI) runtime resumes mdss which powers on the
mdss_gdsc. This wedges the GDSC because 'disp_cc_mdss_rot_clk_src' is
parented to 'disp_cc_pll0' and that PLL is off. With the GDSC wedged,
mdss_runtime_resume() tries to enable 'disp_cc_mdss_mdp_clk' but it
can't because the GDSC has wedged all the clks associated with the GDSC
causing clks to stay stuck off.
This leads to the following warning seen at boot and a black screen
because the display driver fails to probe.
Fix these problems by parking shared RCGs at boot. This will properly
initialize the parked_cfg struct member so that the parent is reported
properly and ensure that the clk won't get stuck on or off because the
RCG is parented to the safe source (XO).
Fixes: 703db1f5da1e ("clk: qcom: rcg2: Cache CFG register updates for parked RCGs") Reported-by: Stephen Boyd <sboyd@kernel.org> Closes: https://lore.kernel.org/r/1290a5a0f7f584fcce722eeb2a1fd898.sboyd@kernel.org Closes: https://issuetracker.google.com/319956935 Reported-by: Laura Nao <laura.nao@collabora.com> Closes: https://lore.kernel.org/r/20231218091806.7155-1-laura.nao@collabora.com Cc: Bjorn Andersson <andersson@kernel.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240502224703.103150-1-swboyd@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Allow the USB3 second and third GCC PHY pipe clocks to propagate the
rate to the pipe clocks provided by the QMP combo PHYs. The first
instance is already doing that.
On big endian architectures, it is possible to run into a memory out of
bounds pointer dereference when FCP targets are zoned.
In lpfc_prep_embed_io, the memcpy(ptr, fcp_cmnd, sgl->sge_len) is
referencing a little endian formatted sgl->sge_len value. So, the memcpy
can cause big endian systems to crash.
Redefine the *sgl ptr as a struct sli4_sge_le to make it clear that we are
referring to a little endian formatted data structure. And, update the
routine with proper le32_to_cpu macro usages.
Fixes: af20bb73ac25 ("scsi: lpfc: Add support for 32 byte CDBs") Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240628172011.25921-8-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Two missing check in virtio_net_hdr_to_skb() allowed syzbot
to crash kernels again
1. After the skb_segment function the buffer may become non-linear
(nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere
the __skb_linearize function will not be executed, then the buffer will
remain non-linear. Then the condition (offset >= skb_headlen(skb))
becomes true, which causes WARN_ON_ONCE in skb_checksum_help.
2. The struct sk_buff and struct virtio_net_hdr members must be
mathematically related.
(gso_size) must be greater than (needed) otherwise WARN_ON_ONCE.
(remainder) must be greater than (needed) otherwise WARN_ON_ONCE.
(remainder) may be 0 if division is without remainder.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller
Fixes: 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head") Signed-off-by: Denis Arefev <arefev@swemel.ru>
Message-Id: <20240613095448.27118-1-arefev@swemel.ru> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are two issues around seqpacket_allow:
1. seqpacket_allow is not initialized when socket is
created. Thus if features are never set, it will be
read uninitialized.
2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared,
then seqpacket_allow will not be cleared appropriately
(existing apps I know about don't usually do this but
it's legal and there's no way to be sure no one relies
on this).
To fix:
- initialize seqpacket_allow after allocation
- set it unconditionally in set_features
Reported-by: syzbot+6c21aeb59d0e82eb2782@syzkaller.appspotmail.com Reported-by: Jeongjun Park <aha310510@gmail.com> Fixes: ced7b713711f ("vhost/vsock: support SEQPACKET for transport"). Tested-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Cc: David S. Miller <davem@davemloft.net> Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240422100010-mutt-send-email-mst@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are two issues related to epf_ntb_epc_cleanup():
1) It should call epf_ntb_config_sspad_bar_clear()
2) The epf_ntb_bind() function should call epf_ntb_epc_cleanup()
to cleanup.
I also changed the ordering a bit. Unwinding should be done in the
mirror order from how they are allocated.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Link: https://lore.kernel.org/linux-pci/aaffbe8d-7094-4083-8146-185f4a84e8a1@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch complains about inconsistent NULL checking in vpci_scan_bus():
drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021)
Instead of printing an error message and then crashing we should return
an error code and clean up.
Also the NULL check is reversed so it prints an error for success
instead of failure.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Link: https://lore.kernel.org/linux-pci/68e0f6a4-fd57-45d0-945b-0876f2c8cb86@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the TBU driver will only probe when CONFIG_ARM_SMMU_QCOM_DEBUG
is enabled. The driver not probing would prevent the platform to reach
sync_state and the system will remain in sub-optimal power consumption
mode while waiting for all consumer drivers to probe. To address this,
let's register the TBU driver in qcom_smmu_impl_init(), so that it can
probe, but still enable its functionality only when the debug option in
Kconfig is enabled.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/r/CAA8EJppcXVu72OSo+OiYEiC1HQjP3qCwKMumOsUhcn6Czj0URg@mail.gmail.com Fixes: 414ecb030870 ("iommu/arm-smmu-qcom-debug: Add support for TBUs") Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> Link: https://lore.kernel.org/r/20240704010759.507798-1-quic_c_gdjako@quicinc.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
acpi_get_first_physical_node() can return NULL in several cases (no such
device, ACPI table error, reference count drop to 0, etc).
Existing check just emit error message, but doesn't perform return.
Then this NULL pointer is passed to devm_acpi_dev_add_driver_gpios()
where it is dereferenced.
Adjust this error handling by adding error code return.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 02527c3f2300 ("ASoC: amd: add Machine driver for Jadeite platform") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Link: https://patch.msgid.link/20240703191007.8524-1-amishin@t-argos.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instantiating a device by calling i2c_new_client_device() assumes that the
device is not already instantiated. If that is not the case, it will return
an error and generate a misleading kernel log message.
i2c i2c-0: Failed to register i2c client jc42 at 0x18 (-16)
This can be reproduced by unloading the ee1004 driver and loading it again.
Avoid this by calling i2c_new_scanned_device() instead, which returns
silently if a device is already instantiated or does not exist.
Fixes: 393bd1000f81 ("eeprom: ee1004: add support for temperature sensor") Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240629173716.20389-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This change rejects the KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 ioctls when called on a ucontrol VM.
This is necessary since ucontrol VMs have kvm->arch.gmap set to 0 and
would thus result in a null pointer dereference further in.
Memory management needs to be performed in userspace and using the
ioctls KVM_S390_UCAS_MAP and KVM_S390_UCAS_UNMAP.
Also improve s390 specific documentation for KVM_SET_USER_MEMORY_REGION
and KVM_SET_USER_MEMORY_REGION2.
rm-raid devices will occasionally trigger the following warning when
being resumed after a table load because DM_RECOVERY_RUNNING is set:
WARNING: CPU: 7 PID: 5660 at drivers/md/dm-raid.c:4105 raid_resume+0xee/0x100 [dm_raid]
The failing check is:
WARN_ON_ONCE(test_bit(MD_RECOVERY_RUNNING, &mddev->recovery));
This check is designed to make sure that the sync thread isn't
registered, but md_check_recovery can set MD_RECOVERY_RUNNING without
the sync_thread ever getting registered. Instead of checking if
MD_RECOVERY_RUNNING is set, check if sync_thread is non-NULL.
In case of all pipe clocks, there is a QMP PHY clock that is feeding them.
If, for whatever reason, the clock from the PHY is not enabled, halt bit
will not get set, and the clock controller driver will assume the clock
is stuck in a specific state. The way this is supposed to be properly
fixed is to defer the checking of the halt bit until after the PHY clock
has been initialized, but doing so complicates the clock controller
driver. In fact, since these pipe clocks are consumed by the PHY, while
the PHY is also the one providing the source, if clock gets stuck, the PHY
driver would be to blame. So instead of checking the halt bit in here,
just skip it and assume the PHY driver is handling the source clock
correctly.
After iova_bitmap_set_ahead() returns it may be at the end of the range.
Move iova_bitmap_set_ahead() earlier to avoid unnecessary attempt in
trying to pin the next pages by reusing iova_bitmap_done() check.
Fixes: 2780025e01e2 ("iommufd/iova_bitmap: Handle recording beyond the mapped pages") Link: https://lore.kernel.org/r/20240627110105.62325-7-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Matt Ochs <mochs@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
added tests covering edge cases in the boundaries of iova bitmap. Although
it used buffer sizes thinking in PAGE_SIZE (4K) as opposed to the
MOCK_PAGE_SIZE (2K) that is used in iommufd mock selftests. This meant that
isn't correctly exercising everything specifically the u32 and 4K bitmap
test cases. Fix selftests buffer sizes to be based on mock page size.
Link: https://lore.kernel.org/r/20240627110105.62325-5-joao.m.martins@oracle.com Reported-by: Kevin Tian <kevin.tian@intel.com> Closes: https://lore.kernel.org/linux-iommu/96efb6cf-a41c-420f-9673-2f0b682cac8c@oracle.com/ Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Matt Ochs <mochs@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With 64k base pages, the first 128k iova length test requires less than a
byte for a bitmap, exposing a bug in the tests that assume that bitmaps are
at least a byte.
Rather than dealing with bytes, have _test_mock_dirty_bitmaps() pass the
number of bits. The caller functions are adjusted to also use bits as well,
and converting to bytes when clearing, allocating and freeing the bitmap.
Link: https://lore.kernel.org/r/20240627110105.62325-2-joao.m.martins@oracle.com Reported-by: Matt Ochs <mochs@nvidia.com> Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Matt Ochs <mochs@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
cur_cpu_spec->cpu_name is appended to ppc_hw_desc before cur_cpu_spec
has taken on its final value. This is illustrated on pseries by
comparing the CPU name as reported at boot ("POWER8E (raw)") to the
contents of /proc/cpuinfo ("POWER8 (architected)"):
When there are rng sources registering at the hwrng core via
hwrng_register() a struct hwrng is delivered. There is a quality
field in there which is used to decide which of the registered
hw rng sources will be used by the hwrng core.
With commit 16bdbae39428 ("hwrng: core - treat default_quality as
a maximum and default to 1024") there came in a new default of
1024 in case this field is empty and all the known hw rng sources
at that time had been reworked to not fill this field and thus
use the default of 1024.
The code choosing the 'better' hw rng source during registration
of a new hw rng source has never been adapted to this and thus
used 0 if the hw rng implementation does not fill the quality field.
So when two rng sources register, one with 0 (meaning 1024) and
the other one with 999, the 999 hw rng will be chosen.
As the later invoked function hwrng_init() anyway adjusts the
quality field of the hw rng source, this adjustment is now done
during registration of this new hw rng source.
Tested on s390 with two hardware rng sources: crypto cards and
trng true random generator device driver.
Fixes: 16bdbae39428 ("hwrng: core - treat default_quality as a maximum and default to 1024") Reported-by: Christian Rund <Christian.Rund@de.ibm.com> Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
In function lpfc_xcvr_data_show, the memory allocation with kmalloc might
fail, thereby making rdp_context a null pointer. In the following context
and functions that use this pointer, there are dereferencing operations,
leading to null pointer dereference.
To fix this issue, a null pointer check should be added. If it is null,
use scnprintf to notify the user and return len.
Fixes: 479b0917e447 ("scsi: lpfc: Create a sysfs entry called lpfc_xcvr_data for transceiver info") Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com> Link: https://lore.kernel.org/r/20240621082545.449170-1-qq810974084@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If IORESOURCE_MEM "lpass-rxtx-cdc-dma-lpm" or "lpass-va-cdc-dma-lpm"
resources is not provided in Device Tree due to any error,
platform_get_resource_byname() will return NULL which is later
dereferenced. According to sound/qcom,lpass-cpu.yaml, these resources
are provided, but DT can be broken due to any error. In such cases driver
must be able to protect itself, since the DT is external data for the
driver.
Adjust this issues by adding NULL return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b138706225c9 ("ASoC: qcom: Add regmap config support for codec dma driver") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Link: https://patch.msgid.link/20240605104953.12072-1-amishin@t-argos.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
BTH_ACK_MASK bit is used to indicate that an acknowledge
(for this packet) should be scheduled by the responder.
Both UC and UD QPs are unacknowledged, so don't set
BTH_ACK_MASK for UC or UD QPs.
Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Honggang LI <honggangli@163.com> Link: https://lore.kernel.org/r/20240624020348.494338-1-honggangli@163.com Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When creating a QP, one of the attributes is TS format (timestamp).
In some devices, we have a limitation that all QPs should have the same
ts_format. The ts_format is chosen based on the device's capability.
The qp_ts_format cap resides under the RoCE caps table, and the
cap will be 0 when RoCE is disabled. So when RoCE is disabled, the
value that should be queried is sq_ts_format under HCA caps.
Consider the case when the system supports REAL_TIME_TS format (0x2),
some QPs are created with REAL_TIME_TS as ts_format, and afterwards
RoCE gets disabled. When trying to construct a new QP, we can't use
the qp_ts_format, that is queried from the RoCE caps table, Since it
leads to passing 0x0 (FREE_RUNNING_TS) as the value of the qp_ts_format,
which is different than the ts_format of the previously allocated
QPs REAL_TIME_TS format (0x2).
Thus, to resolve this, read the sq_ts_format, which also reflect
the supported ts format for the QP when RoCE is disabled.
Fixes: 4806f1e2fee8 ("net/mlx5: Set QP timestamp mode to default") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Link: https://lore.kernel.org/r/32801966eb767c7fd62b8dea3b63991d5fbfe213.1718554199.git.leon@kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/infiniband/hw/mlx4/alias_GUID.c: In function ‘mlx4_ib_init_alias_guid_service’:
drivers/infiniband/hw/mlx4/alias_GUID.c:878:74: error: ‘%d’ directive
output may be truncated writing between 1 and 11 bytes into a region of
size 5 [-Werror=format-truncation=]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:63: note: directive argument in the range [-2147483641, 2147483646]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:17: note: ‘snprintf’ output
between 12 and 22 bytes into a destination of size 15
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Increase size of the name array to avoid truncated output warning.
drivers/infiniband/hw/mlx4/mad.c: In function ‘mlx4_ib_alloc_demux_ctx’:
drivers/infiniband/hw/mlx4/mad.c:2197:47: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 4
[-Werror=format-truncation=]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2197:38: note: directive argument in
the range [-2147483645, 2147483647]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2197:9: note: ‘snprintf’ output between
10 and 20 bytes into a destination of size 12
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2205:38: note: directive argument in
the range [-2147483645, 2147483647]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2213:38: note: directive argument in
the range [-2147483645, 2147483647]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:244: drivers/infiniband/hw/mlx4/mad.o] Error 1
Update wait_val fields as per the default hardware values of the GDSC as
otherwise it would lead to GDSC FSM state stuck causing power on/off
failures of the GSDC.
Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-6-adcc756a23df@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The RCG's clk src has to be parked at XO while disabling as per the
HW recommendation, hence use clk_rcg2_shared_ops to achieve the same.
Also gpu_cc_cb_clk is recommended to be kept always ON, hence use
clk_branch2_aon_ops to keep the clock always ON.
Fixes: 0afa16afc36d ("clk: qcom: add the GPUCC driver for sa8775p") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240612-sa8775p-v2-gcc-gpucc-fixes-v2-5-adcc756a23df@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The GPU clocks/GDSCs have been marked critical from the clock driver
but the GPU driver votes on these resources as per the HW requirement.
In the case where these clocks & GDSCs are left enabled, would have
power impact and also cause GPU stability/corruptions.
Fix the same by removing the CLK_IS_CRITICAL for clocks and ALWAYS_ON
flags for the GPU GDSCs.
Update the GDSC wait_val fields as per the default hardware values as
otherwise they would lead to GDSC FSM state to be stuck and causing
failures to power on/off. Also add the GDSC flags as applicable and
add support to control PCIE GDSC's using collapse vote registers.
Commit 83e824a4a595 ("mtd: spi-nor: Correct flags for Winbond w25q128")
removed the flags for non-SFDP devices. It was assumed that it wasn't in
use anymore. This wasn't true. Add the no_sfdp_flags as well as the size
again.
We add the additional flags for dual and quad read because they have
been reported to work properly by Hartmut using both older and newer
versions of this flash, the similar flashes with 64Mbit and 256Mbit
already have these flags and because it will (luckily) trigger our
legacy SFDP parsing, so newer versions with SFDP support will still get
the parameters from the SFDP tables.
The value “-ENOMEM” was assigned to the local variable “ret”
in one if branch after a devm_kzalloc() call failed at the beginning.
This error code will trigger then a pcmdevice_remove() call with a passed
null pointer so that an undesirable dereference will be performed.
Thus return the appropriate error code directly.
Fixes: 1324eafd37aa ("ASoc: PCM6240: Create PCM6240 Family driver code") Signed-off-by: Hao Ge <gehao@kylinos.cn> Link: https://patch.msgid.link/20240617020954.17252-1-hao.ge@linux.dev Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
IRQ lookup functions such as those in ACPI can return error values when
an IRQ is not defined. The i2c core driver converts the error codes to a
value of 0 and the SPI bus driver passes them unaltered to client device
drivers.
The cs35l56 driver should only accept positive non-zero values as IRQ
numbers.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Link: https://msgid.link/r/20240617135338.82006-1-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In only loading RCA (Reconfigurable Architecture) binary case, no DSP
program will be working inside tas2563/tas2781, that is dsp-bypass mode,
do not support speaker protection, or audio acoustic algorithms in this
mode.
While updating the cpus node, commit 40c753993e3a ("powerpc/kexec_file:
Use current CPU info while setting up FDT") first deletes all subnodes
under the /cpus node. However, while adding sub-nodes back, it missed
adding cpus subnodes whose device_type != "cpu", such as l2-cache*,
l3-cache*, ibm,powerpc-cpu-features.
Fix this by only deleting cpus sub-nodes of device_type == "cpus" and
then adding all available nodes with device_type == "cpu".
Fixes: 40c753993e3a ("powerpc/kexec_file: Use current CPU info while setting up FDT") Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240510102235.2269496-3-sourabhjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_graph_get_next_endpoint() releases the reference to the previous
endpoint on each iteration, but when parsing fails the loop exits
early meaning the last reference is never dropped.
Fix it by dropping the refcount in the exit condition.
Fixes: d375b356e687 ("coresight: Fix support for sparsely populated ports") Signed-off-by: James Clark <james.clark@arm.com> Reported-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240529133626.90080-1-james.clark@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Static checker is complaining about the ASID possibly set uninitialized.
This only happens in case of error and this value would be ignored anyway.
A simple fix would be just to initialize the local variable to zero,
this path will only be reached on the first attach to a domain where
the CD is already initialized to zero.
This avoids having to bloat the function with an error path.
Closes: https://lore.kernel.org/linux-iommu/849e3d77-0a3c-43c4-878d-a0e061c8cd61@moroto.mountain/T/#u Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Mostafa Saleh <smostafa@google.com> Fixes: 04905c17f648 ("iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()") Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240604185218.2602058-1-smostafa@google.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure we use a DMA safe buffer (IIO_DMA_MINALIGN) for all the spi
transfers. Only relevant for writes since for reads
spi_write_then_read() is used which does not require DMA safe buffers.
Also note that for consistency, ad9467_spi_read() is also taking struct
ad9467_state as a parameter (even if not really needed).
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 1daec8cfebc2 ("clk: qcom: camcc: Add camera clock controller driver for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240531095142.9688-4-quic_tdas@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Update the force mem core bit for UFS ICE clock to force the core on signal
to remain active during halt state of the clk. When retention bit of the
clock is set the memories of the subsystem will retain the logic across
power states.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240531095142.9688-3-quic_tdas@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MCQ_OPR_OFFSET_n macro takes 'hba' in the caller context without
receiving 'hba' instance as an argument. To prevent potential bugs in
future use cases, add an argument 'hba'.
Fixes: 2468da61ea09 ("scsi: ufs: core: mcq: Configure operation and runtime interface") Cc: Asutosh Das <quic_asutoshd@quicinc.com> Signed-off-by: Minwoo Im <minwoo.im@samsung.com> Link: https://lore.kernel.org/r/20240519221457.772346-2-minwoo.im@samsung.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently we only support Vector for SMP platforms, that is, all SMP
cores have the same vlenb. If we happen to detect a mismatching vlen, it
is better to just fail bootting it up to prevent further race/scheduling
issues.
Also, move .Lsecondary_park forward and chage `tail smp_callin` into a
regular call in the early assembly. So a core would be parked right
after a return from smp_callin. Note that a successful smp_callin
does not return.
Fixes: 7017858eb2d7 ("riscv: Introduce riscv_v_vsize to record size of Vector context") Reported-by: Conor Dooley <conor.dooley@microchip.com> Closes: https://lore.kernel.org/linux-riscv/20240228-vicinity-cornstalk-4b8eb5fe5730@spud/ Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com> Link: https://lore.kernel.org/r/20240510-zve-detection-v5-2-0711bdd26c12@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Tegra194 and Tegra234 PCIe EP controllers have 64K alignment restriction
for the inbound ATU. Set the endpoint inbound ATU alignment to 64kB in the
Tegra194 PCIe driver.
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Suggested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Link: https://lore.kernel.org/linux-pci/20240508092207.337063-1-jonathanh@nvidia.com Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Avoid large backtrace, it is sufficient to warn the user that there has
been a link problem. Either the link has failed and the system is in need
of maintenance, or the link continues to work and user has been informed.
The message from the warning can be looked up in the sources.
This makes an actual link issue less verbose.
First of all, this controller has a limitation in that the controller
driver has to assist the hardware with transition to L1 link state by
writing L1IATN to PMCTRL register, the L1 and L0 link state switching
is not fully automatic on this controller.
In case of an ASMedia ASM1062 PCIe SATA controller which does not support
ASPM, on entry to suspend or during platform pm_test, the SATA controller
enters D3hot state and the link enters L1 state. If the SATA controller
wakes up before rcar_pcie_wakeup() was called and returns to D0, the link
returns to L0 before the controller driver even started its transition to
L1 link state. At this point, the SATA controller did send an PM_ENTER_L1
DLLP to the PCIe controller and the PCIe controller received it, and the
PCIe controller did set PMSR PMEL1RX bit.
Once rcar_pcie_wakeup() is called, if the link is already back in L0 state
and PMEL1RX bit is set, the controller driver has no way to determine if
it should perform the link transition to L1 state, or treat the link as if
it is in L0 state. Currently the driver attempts to perform the transition
to L1 link state unconditionally, which in this specific case fails with a
PMSR L1FAEG poll timeout, however the link still works as it is already
back in L0 state.
Reduce this warning verbosity. In case the link is really broken, the
rcar_pcie_config_access() would fail, otherwise it will succeed and any
system with this controller and ASM1062 can suspend without generating
a backtrace.
Fixes: 84b576146294 ("PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()") Link: https://lore.kernel.org/linux-pci/20240511235513.77301-1-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If IORESOURCE_MEM is not provided in Device Tree due to
any error, resource_list_first_type() will return NULL and
pci_parse_request_of_pci_ranges() will just emit a warning.
This will cause a NULL pointer dereference. Fix this bug by adding NULL
return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
After 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), ks_pcie_v3_65_add_bus() enabled BAR 0 for both v3.65a and
v4.90a devices. On the AM654x SoC, which uses v4.90a, enabling BAR 0
causes Completion Timeouts when setting up MSI-X. These timeouts delay
boot of the AM654x by about 45 seconds.
Move the BAR 0 initialization to ks_pcie_msi_host_init(), which is only
used for v3.65a devices, and remove ks_pcie_v3_65_add_bus().
pbus_size_mem() keeps the size of the optional resources in
children_add_size. When calculating the PCI bridge window size,
calculate_memsize() lower bounds size by old_size before adding
children_add_size and performing the window size alignment. This
results in double counting for the resources in children_add_size
because old_size may be based on the previous size of the bridge
window after it has already included children_add_size (that is,
size1 in pbus_size_mem() from an earlier invocation of that
function).
As a result, on repeated remove of the bus & rescan cycles the resource
size keeps increasing when children_add_size is non-zero as can be seen
from this extract:
Instead of getting the epc_features from pci_epc_get_features() API, use
the cached pci_epf_test::epc_features value to avoid the NULL check. Since
the NULL check is already performed in pci_epf_test_bind(), having one more
check in pci_epf_test_core_init() is redundant and it is not possible to
hit the NULL pointer dereference.
Also with commit a01e7214bef9 ("PCI: endpoint: Remove "core_init_notifier"
flag"), 'epc_features' got dereferenced without the NULL check, leading to
the following false positive Smatch warning:
drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747)
Thus, remove the redundant NULL check and also use the epc_features::
{msix_capable/msi_capable} flags directly to avoid local variables.
[kwilczynski: commit log] Fixes: 5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization") Closes: https://lore.kernel.org/linux-pci/024b5826-7180-4076-ae08-57d2584cca3f@moroto.mountain Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-1-eacd54831444@linaro.org Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sorting in iio_gts_build_avail_time_table is not working as intended.
It could result in an out-of-bounds access when the time is zero.
Here are more details:
1. When the gts->itime_table[i].time_us is zero, e.g., the time
sequence is `3, 0, 1`, the inner for-loop will not terminate and do
out-of-bound writes. This is because once `times[j] > new`, the value
`new` will be added in the current position and the `times[j]` will be
moved to `j+1` position, which makes the if-condition always hold.
Meanwhile, idx will be added one, making the loop keep running without
termination and out-of-bound write.
2. If none of the gts->itime_table[i].time_us is zero, the elements
will just be copied without being sorted as described in the comment
"Sort times from all tables to one and remove duplicates".
For more details, please refer to
https://lore.kernel.org/all/6dd0d822-046c-4dd2-9532-79d7ab96ec05@gmail.com.
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com> Suggested-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Co-developed-by: Matti Vaittinen <mazziesaccount@gmail.com> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/d501ade8c1f7b202d34c6404eda423489cab1df5.1714480171.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
nfs_folio_length is unsafe to use without having the folio locked and a
check for a NULL ->f_mapping that protects against truncations and can
lead to kernel crashes. E.g. when running xfstests generic/065 with
all nfs trace points enabled.
Follow the model of the XFS trace points and pass in an explіcit offset
and length. This has the additional benefit that these values can
be more accurate as some of the users touch partial folio ranges.
Fixes: eb5654b3b89d ("NFS: Enable tracing of nfs_invalidate_folio() and nfs_launder_folio()") Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In kbd_rgb_mode_store the dev_get_drvdata() call was assuming the device
data was asus_wmi when it was actually led_classdev.
This patch corrects this by making the correct chain of calls to get the
asus_wmi driver data.
Fixes: ae834a549ec1 ("platform/x86: asus-wmi: add support variant of TUF RGB") Tested-by: Denis Benato <benato.denis96@gmail.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240716011130.17464-2-luke@ljones.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor functions.
Fixes: ee756ef7491e ("perf dso: Add reference count checking and accessor functions") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yunseong Kim <yskelg@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove the unused cif_stack argument and add a protype in oplib_64.h
Commit ef3e035c3a9b ("sparc64: Fix register corruption in top-most
kernel stack frame during boot.") removed the cif_stack argument to
prom_cif init in the declaration at the caller site and the usage of it
within prom_cif_init, but not in the function signature of the function
itself.
This also fixes the following warning:
arch/sparc/prom/p1275.c:52:6: warning: no previous prototype for ‘prom_cif_init’
Fixes: ef3e035c3a9b ("sparc64: Fix register corruption in top-most kernel stack frame during boot.") Link: https://lore.kernel.org/r/20240710094155.458731-3-andreas@gaisler.com Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This code was passing the incorrect pointer to PTR_ERR_OR_ZERO() so it
always returned success. It should have been checking the array element
instead of the array itself.
Fixes: 96a2e242a5dc ("leds: flash: Add driver to support flash LED module in QCOM PMICs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/ZoWJS_epjIMCYITg@stanley.mountain Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add qxl_bo_pin_and_vmap() that pins and vmaps a buffer object in one
step. Update callers of the regular qxl_bo_vmap(). Fixes a bug where
qxl accesses an unpinned buffer object while it is being moved; such
as with the monitor-description BO. An typical error is shown below.
[ 4.303586] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65376256x16777216+0+0
[ 4.586883] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65376256x16777216+0+0
[ 4.904036] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65335296x16777216+0+0
[ 5.374347] [drm:qxl_release_from_id_locked] *ERROR* failed to find id in release_idr
Commit b33651a5c98d ("drm/qxl: Do not pin buffer objects for vmap")
removed the implicit pin operation from qxl's vmap code. This is the
correct behavior for GEM and PRIME interfaces, but the pin is still
needed for qxl internal operation.
Also add a corresponding function qxl_bo_vunmap_and_unpin() and remove
the old qxl_bo_vmap() helpers.
Future directions: BOs should not be pinned or vmapped unnecessarily.
The pin-and-vmap operation should be removed from the driver and a
temporary mapping should be established with a vmap_local-like helper.
See the client helper drm_client_buffer_vmap_local() for semantics.
v2:
- unreserve BO on errors in qxl_bo_pin_and_vmap() (Dmitry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: b33651a5c98d ("drm/qxl: Do not pin buffer objects for vmap") Reported-by: David Kaplan <david.kaplan@amd.com> Closes: https://lore.kernel.org/dri-devel/ab0fb17d-0f96-4ee6-8b21-65d02bb02655@suse.de/ Tested-by: David Kaplan <david.kaplan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Christian König <christian.koenig@amd.com> Cc: Zack Rusin <zack.rusin@broadcom.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux.dev Cc: spice-devel@lists.freedesktop.org Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708142208.194361-1-tzimmermann@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
If the extended attribute size is not a multiple of block size, the last
block in the EA inode will have uninitialized tail which will get
written to disk. We will never expose the data to userspace but still
this is not a good practice so just zero out the tail of the block as it
isn't going to cause a noticeable performance overhead.
When fast-commit needs to track ranges, it has to handle inodes that have
inlined data in a different way because ext4_fc_write_inode_data(), in the
actual commit path, will attempt to map the required blocks for the range.
However, inodes that have inlined data will have it's data stored in
inode->i_block and, eventually, in the extended attribute space.
Unfortunately, because fast commit doesn't currently support extended
attributes, the solution is to mark this commit as ineligible.
Previously in order to mark the communication with the DS server,
we tried to use NFS_CS_DS in cl_flags. However, this flag would
only be saved for the DS server and in case where DS equals MDS,
the client would not find a matching nfs_client in nfs_match_client
that represents the MDS (but is also a DS).
Instead, don't rely on the NFS_CS_DS but instead use NFS_CS_PNFS.
Fixes: 379e4adfddd6 ("NFSv4.1: fixup use EXCHGID4_FLAG_USE_PNFS_DS for DS server") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Prior to the commit identified below, call_transmit_status() would
handle -EPERM and other errors related to an unreachable server by
falling through to call_status() which added a 3-second delay and
handled the failure as a timeout.
Since that commit, call_transmit_status() falls through to
handle_bind(). For UDP this moves straight on to handle_connect() and
handle_transmit() so we immediately retransmit - and likely get the same
error.
This results in an indefinite loop in __rpc_execute() which triggers a
soft-lockup warning.
For the errors that indicate an unreachable server,
call_transmit_status() should fall back to call_status() as it did
before. This cannot cause the thundering herd that the previous patch
was avoiding, as the call_status() will insert a delay.
Fixes: ed7dc973bd91 ("SUNRPC: Prevent thundering herd when the socket is not connected") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Avoid FastReg operations getting MW_BIND_ERR after a reconnect.
rpcrdma_reqs_reset() is called on transport tear-down to get each
rpcrdma_req back into a clean state.
MRs on req->rl_registered are waiting for a FastReg, are already
registered, or are waiting for invalidation. If the transport is
being torn down when reqs_reset() is called, the matching LocalInv
might never be posted. That leaves these MR registered /and/ on
req->rl_free_mrs, where they can be re-used for the next
connection.
Since xprtrdma does not keep specific track of the MR state, it's
not possible to know what state these MRs are in, so the only safe
thing to do is release them immediately.
Fixes: 5de55ce951a1 ("xprtrdma: Release in-flight MRs on disconnect") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once")
changed the memory allocation of 'tll' to consolidate it into a single
allocation, introducing an incorrect size calculation.
In particular, the allocation for the array of pointers was converted
into a single-pointer allocation.
sizeof(tll->ch_clk[nch]) returns the size of a single pointer instead of
the expected nch pointers.
This bug went unnoticed because the allocation size was small enough to
fit within the minimum size of a memory allocation for this particular
case [1].
The complete allocation can still be done at once with the struct_size
macro, which comes in handy for structures with a trailing flexible
array.
Fix the memory allocation to obtain the original size again.
If a queue is already assigned to the hardware, then a newly submitted
job can start straight away without waiting for the tick. However in
this case the devfreq infrastructure isn't notified that the GPU is
busy. By the time the tick happens the job might well have finished and
no time will be accounted for the GPU being busy.
Fix this by recording the GPU as busy directly in queue_run_job() in the
case where there is a CSG assigned and therefore we just ring the
doorbell.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240703155646.80928-1-steven.price@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
For scenarios, when source change is followed by VIDIOC_STREAMOFF
on output plane, driver should discard any queued OUTPUT
buffers, which are not decoded or dequeued.
Flush with HFI_FLUSH_INPUT does not have any actual impact.
So, fix it, by invoking HFI_FLUSH_ALL, which will flush all
queued buffers.
The new --per-cluster option was added recently but it forgot to update
the aggr_header fields which are used for --metric-only option. And it
resulted in a segfault due to NULL string in fputs().
Fixes: cbc917a1b03b ("perf stat: Support per-cluster aggregation") Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20240628000604.1296808-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drm_edid_to_sad() might return an error or just zero. If that is the
case, we must not free the SADs because there was no allocation in
the first place.
Fixes: dab12fa8d2bd ("drm/mediatek/dp: fix memory leak on ->get_edid callback audio detection") Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20240604083337.1879188-1-mwalle@kernel.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mtk_find_possible_crtcs() assumes that the main path will always have
the CRTC with id 0, the ext id 1 and the third id 2. This is only true
if the paths are all available. But paths are optional (see also
comment in mtk_drm_kms_init()), e.g. the main path might not be enabled
or available at all. Then the CRTC IDs will shift one up, e.g. ext will
be 0 and the third path will be 1.
To fix that, dynamically calculate the IDs by the presence of the paths.
While at it, make the return code a signed one and return -ENODEV if no
path is found and handle the error in the callers.
Fixes: 5aa8e7647676 ("drm/mediatek: dpi/dsi: Change the getting possible_crtc way") Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Michael Walle <mwalle@kernel.org> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240606092122.2026313-1-mwalle@kernel.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When doing fast_commit replay an infinite loop may occur due to an
uninitialized extent_status struct. ext4_ext_determine_insert_hole() does
not detect the replay and calls ext4_es_find_extent_range(), which will
return immediately without initializing the 'es' variable.
Because 'es' contains garbage, an integer overflow may happen causing an
infinite loop in this function, easily reproducible using fstest generic/039.
This commit fixes this issue by unconditionally initializing the structure
in function ext4_es_find_extent_range().
Thanks to Zhang Yi, for figuring out the real problem!
Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Link: https://patch.msgid.link/20240515082857.32730-1-luis.henriques@linux.dev Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
DRM core code cannot call into DRM helper code, as this would lead to
circular references in the modular case. Hence drop the selection of
DRM_KMS_HELPER. It was unused anyway, as v10 switched from using
the DRM format helpers to its own color format conversion, cfr. commit 9544309775c3 ("drm/panic: Add support for color format conversion").
Remove the unneeded include of <drm/drm_format_helper.h>.
projects / thirdparty / kernel / stable.git / log
