networkd: don't pull in systemd-networkd-wait-online service from systemd-networkd when enabling
networkd-wait-online should never exist in the default transaction,
unless explicitly enable or pulled in via things like NFS. However, just
enabling networkd shouldn't enable networkd-wait-online, since it's
common to use the former without the latter.
This is useful so that distros have something to base their own policy
of. It also useful to make sure that minimal installs always get useful
configuration in place.
install: introduce new DefaultInstance= field for [Install] sections
The DefaultInstance= name is used when enabling template units when only
specifying the template name, but no instance.
Add DefaultInstance=tty1 to getty@.service, so that when the template
itself is enabled an instance for tty1 is created.
This is useful so that we "systemctl preset-all" can work properly,
because we can operate on getty@.service after finding it, and the right
instance is created.
install: beef up preset logic to limit to only enable or only disable, and do all-unit preset operations
The new "systemctl preset-all" command may now be used to put all
installed units back into the enable/disable state the vendor/admin
encoded in preset files.
Also, introduce "systemctl --preset-mode=enable-only" and "systemctl
--preset-mode=disable-only" to only apply the enable or only the disable
operations of a "systemctl preset" or "systemctl preset-all" operation.
Ruediger Oertel [Fri, 13 Jun 2014 14:41:06 +0000 (16:41 +0200)]
Reset signal-mask on re-exec to init=..
Process 1 (aka init) needs to be started with an empty signal mask.
That includes the process 1 that's started after the initrd is finished.
When the initrd is using systemd (as it does with dracut based initrds)
then it is systemd that calls the real init. Normally this is systemd
again, except when the user uses for instance "init=/bin/bash" on the
kernel command line.
David Herrmann [Fri, 13 Jun 2014 16:38:15 +0000 (18:38 +0200)]
util: fix multiply-alloc helpers with size==0
Passing 0 to malloc() is not required to return NULL. Therefore, don't
bail out if "b" is 0. This is not of importance to the existing helpers,
but the upcoming realloc_multiply() requires this. To keep consistence, we
keep the same behavior for the other helpers.
David Herrmann [Thu, 12 Jun 2014 15:54:48 +0000 (17:54 +0200)]
macro: add DISABLE_WARNING_SHADOW
As it turns out, we cannot use _Pragma in compound-statements. Therefore,
constructs like MIN(MAX(a, b), x) will warn due to shadowed variable
declarations. The DISABLE_WARNING_SHADOW macro can be used to suppress
these.
Note that using UNIQUE(_var) does not work either as GCC uses the last
line of a macro-expansion for __LINE__, therefore, still causing both
macros to have the same variables. We could use different variable-names
for MIN and MAX, but that just hides the problem and still fails for
MIN(something(MIN(a, b)), c).
The only working solution is to use __COUNTER__ and pass it pre-evaluated
as extra argument to a macro to use as name-prefix. This, however, makes
all these macros much more complicated so I'll go with manual
DISABLE_WARNING_SHADOW so far.
units: drop RefuseManualStart= from a couple of update services
The only update service we really need to guard like this is
systemd-tmpfiles-setup.service since if invoked manually might create
/var/run/nologin and thus blocking the user from login. The other
services are pretty much idempotent and don't suffer by this problem,
hence let's simplify them.
/etc/mtab should die die die. It's sad enough util-linux still contains
support for it, but we don't have to partake in that charade, so let's
turn this off.
This is in-line with the fact that since years we already have been
"tainting" systemd if we detect /etc/mtab not being a symlink...
Of course, util-linux is currently broken, and still touches /etc/mtab,
weven if we pass "--no-mtab" to it:
Tom Gundersen [Sat, 14 Jun 2014 16:52:46 +0000 (18:52 +0200)]
networkd: link - flush all pending NEWLINK events before trying to match
We could still have an old interface name and/or mac address when libudev
tells us that the device is initialized, as the up-to-date info could still
be on its way from the kernel.
Tom Gundersen [Sat, 14 Jun 2014 13:38:35 +0000 (15:38 +0200)]
networkd: netdev - allow setting MACAddress in .netdev files
It may sometimes be necessary to specify the MAC address of a netdev.
Let us set the correct one from the get-go, rather than having the
kernel generate a random one, and then change it after.
os-release: define /usr/lib/os-release as fallback for /etc/os-release
The file should have been in /usr/lib/ in the first place, since it
describes the OS container in /usr (and not the configuration in /etc),
hence, let's support os-release files in /usr/lib as fallback if no
version in /etc exists, following the usual override logic.
A prior commit already enabled tmpfiles to create /etc/os-release as a
symlink to /usr/lib/os-release should it be missing, thus providing nice
compatibility with applications only checking in /etc.
While it's probably a good idea if all apps check both locations via a
fallback logic, it is only necessary in the early boot process, as long
as the /etc/os-release symlink has not been restored, in case we boot
with an empty /etc.
sysusers: always treat ENOENT as entry-not-found when doing NSS calls
For most NSS calls it is documented that they return NULL + errno=0 when
an entry is not found. However, in reality it appears to be common to
return NULL + errno=ENOENT, instead. Handle that correctly, and don't
consider ENOENT a systematic error.
rpm: add RPM macros to apply sysusers, sysctl, and binfmt drop-ins
With this in place RPMs can make sure that whatever they drop in is
immeidately applied, and not delayed until next reboot.
This also moves systemd-sysusers back to /usr/bin, since hardcoding the
path to /usr/lib in the macros would mean compatibility breaks in
future, should we turn sysusers into a command that is actually OK for
people to call directly. And given that that is quite likely to happen
(since it is useful to prepare images with its --root= switch), let's
just prepare for it.
rpm: don't hardcode the binary paths in the macros, rely on $PATH
this gives us a little bit more freedom to move things around later on,
as we don't hardcode the systemd paths in old RPMs that shall work with
new systemds.
int unit_file_mask(...) in ./src/shared/install.c calls
get_config_path(...) which can in 4 error cases return without setting
"ret", and thus "prefix" can be uninitialized when unit_file_mask(...)
finishes (which it does directly after the error is returned from
get_config_path(...)).
static bool enable_name_policy(...) in ./src/udev/net/link-config.c
calls proc_cmdline(...) to get "line" initialized, but
proc_cmdline(...) does not guarantee that atleast when both
conditions (detect_container(NULL) > 0) and
read_full_file(...) returned < 0.
static int killall(....) in ./src/core/killall.c tries to get "s"
initialized by calling get_process_comm(...) which calls
read_one_line_file(...) which if it fails will mean it is left
uninitialized.
It is then used in argument to strna(s) call where it is
dereferenced(!), in addition to nothing else initializing it before
the scope it is in finishes.
sd-dhcp-client: fix invalid free() in client_send_request()
static int client_send_request(...) in
./src/libsystemd-network/sd-dhcp-client.c tries to initialize
"request" by calling client_message_init(...), which has atleast
5 error cases where it can return without that happening.
This leads to the function finishing without "request" being initialized.
Tom Gundersen [Wed, 5 Mar 2014 07:13:30 +0000 (08:13 +0100)]
networkd: add dhcp server support
When enabled in [Network] it will set up a dhcp server on the interface, listening
on one of its statically configured IPv4 addresses and with a fixed size pool of
leases determined from it.
Tom Gundersen [Sat, 24 May 2014 13:48:47 +0000 (15:48 +0200)]
dhcp-network: allow UDP socket to listen on any address
For this to work nicely we need to use REUSEADDR so that more than one socket
can be open at the same time. Also, we request the ifindex to be appended
to incoming messages, so we know whence it came.
core: add new ConditionNeedsUpdate= unit condition
This new condition allows checking whether /etc or /var are out-of-date
relative to /usr. This is the counterpart for the update flag managed by
systemd-update-done.service. Services that want to be started once after
/usr got updated should use:
This makes sure that they are only run if /etc is out-of-date relative
to /usr. And that it will be executed after systemd-update-done.service
which is responsible for marking /etc up-to-date relative to the current
/usr.
ConditionNeedsUpdate= will also checks whether /etc is actually
writable, and not trigger if it isn't, since no update is possible then.
update-done: add minimal tool to manage system updates for /etc and /var, if /usr has changed
In order to support offline updates to /usr, we need to be able to run
certain tasks on next boot-up to bring /etc and /var in line with the
updated /usr. Hence, let's devise a mechanism how we can detect whether
/etc or /var are not up-to-date with /usr anymore: we keep "touch
files" in /etc/.updated and /var/.updated that are mtime-compared with
/usr. This means:
Whenever the vendor OS tree in /usr is updated, and any services that
shall be executed at next boot shall be triggered, it is sufficient to
update the mtime of /usr itself. At next boot, if /etc/.updated and/or
/var/.updated is older than than /usr (or missing), we know we have to
run the update tools once. After that is completed we need to update the
mtime of these files to the one of /usr, to keep track that we made the
necessary updates, and won't repeat them on next reboot.
A subsequent commit adds a new ConditionNeedsUpdate= condition that
allows checking on boot whether /etc or /var are outdated and need
updating.
This is an early step to allow booting up with an empty /etc, with
automatic rebuilding of the necessary cache files or user databases
therein, as well as supporting later updates of /usr that then propagate
to /etc and /var again.
We install two sysctl snippets ourselves, hence the condition will
always trigger, so no point in tryng to optimize things with this, it
just will make things slower, if anything.
projects / thirdparty / systemd.git / log
