Fix a crash when logging out from the AMI and avoid astobj2 warning messages.
When the user logout the session was being destroyed twice and the file
descriptor was being closed twice. The sessions reference counter wasn't
used in a proper way.
The 'mansession' structure was being treated as an astobj2 and we were
calling ao2_lock/ao2_unlock causing astobj2 report a warning message and
not locking the structure.
Also we were using an ugly naming convention 'destroy_session',
'session_destroy', 'free_session', ... all this "duplicated" code was merged.
This change modifies app_queue to properly generate CDR records in failure
situations.
This involves setting a proper cdr disposition coresponding to the given
failure condition and ensuring the proper information is stored in the cdr
record.
Mark Michelson [Tue, 12 May 2009 20:28:13 +0000 (20:28 +0000)]
Update spiral support in trunk and 1.6.X to match what is in 1.4.
In 1.4, a SIP spiral is treated the same way as a call forward. This
works much better than what is currently in trunk and 1.6.X. The code
in trunk and 1.6.X did not create a new call to the recipient of the spiral,
instead trying to continue the same call. In addition to just being plain
wrong, this also had the side effect of only being able to spiral calls
to other SIP channels.
With this in place, as long as call forwards are honored, SIP spirals
will work properly. This means that it will work for outbound calls
made by the Queue, Dial, and Page applications. For originated calls and
spool calls, however, the spiral will not work properly until a generic
call forward mechanism is introduced into Asterisk.
Set the invitestate to INV_CANCELLED only if we are actually sending a SIP CANCEL.
The problem was that the hangup code was setting the invitestate too early. The result of
this was that we would always send a CANCEL request, even if it was not an appropriate
time to do so (e.g. we have not yet received a provisional response for our INVITE).
Note that this same fix had been applied to trunk and the 1.6.X branches starting with
revision 155467. This is why you will see this revision being blocked from those places.
Move 300 bytes around on the stack, to make more room for an extension buffer.
This allows more concurrent extensions to be copied for a single voicemail,
without creating a possibility of upsetting existing users, where a dialplan
could run out of stack space where it had run fine before. Alternatively,
we could have allocated off the heap, but that is a larger change and would
have increased the chance for instability introduced by this change.
This is really solved starting in 1.6.0.11, as the use of an ast_str buffer
allows an unlimited number of extensions (up to available memory). We
additionally create a new warning message when the buffer length is exceeded,
permitting administrators to see an issue after the fact, whereas previously
the list was silently truncated.
(closes issue #14739)
Reported by: p_lindheimer
Patches:
20090417__bug14739.diff.txt uploaded by tilghman (license 14)
Tested by: p_lindheimer
........
Russell Bryant [Mon, 11 May 2009 22:04:40 +0000 (22:04 +0000)]
Fix some timer state corruption.
In res_timer_timerfd, handle the case that set_rate gets called while a timer
is still in continuous mode. In this case, we want to remember the configured
rate, but not actually set it until continuous mode has been disabled.
Thanks to dvossel for finding and helping to debug the problem.
Sent wrong message to clear a call we started if the other end has not responed yet.
In the state MISDN_CALLING (i.e. SETUP was sent but no answer has arrived yet),
it is not allowed to clear the call with RELEASE_COMPLETE. It must be
cleared with DISCONNECT. A RELEASE_COMPLETE is only allowed as an answer
to a SETUP. (See Q.931 ch. 5.3.2, 5.3.2.a, 5.3.2.b)
Patches:
chan-misdn-ccstate7.patch uploaded by customer.
David Vossel [Fri, 8 May 2009 20:32:51 +0000 (20:32 +0000)]
TCP not matching valid peer.
find_peer() does not find a valid peer when using pvt->recv as the sockaddr_in argument. Because of the way TCP works, the port number in pvt->recv is not what we're looking for at all. There is currently only one place that find_peer searches for a peer using the sockaddr_in argument. If the peer is not found after using pvt->recv (works for UDP since the port number will be correct), a temp sockaddr_in struct is made using the Contact header in the sip_request. This has the correct port number in it.
Make absolute paths for logger channels work properly
(Note: This is not a new feature, it was previously undocumented and broken.)
The Asterisk logger has a feature to support absolute pathnames for logger channels, but the code implementing the feature was broken. This has been fixed, and the absolute path feature is now documented in the sample logger.conf.
........
Fix Background within a Macro for FreePBX.
If the single digit DTMF is an extension in the specified context, then
go there and signal no DTMF. Otherwise, we should exit with that DTMF.
If we're in Macro, we'll exit and seek that DTMF as the beginning of an
extension in the Macro's calling context. If we're not in Macro, then
we'll simply seek that extension in the calling context. Previously,
someone complained about the behavior as it related to the interior of a
Gosub routine, and the fix (#14011) inadvertently broke FreePBX
(#14940). This change should fix both of these situations, but with the
possible incompatibility that if a single digit extension does not exist
(but a longer extension COULD have matched), it would have previously
gone immediately to the "i" extension, but will now need to wait for a
timeout.
(closes issue #14940)
Reported by: p_lindheimer
Patches:
20090420__bug14940.diff.txt uploaded by tilghman (license 14)
Tested by: p_lindheimer
........
Tilghman Lesher [Thu, 7 May 2009 17:51:13 +0000 (17:51 +0000)]
Second result should not contain data from the first result.
(closes issue #15039)
Reported by: jims
Patches:
20090506__issue15039.diff.txt uploaded by tilghman (license 14)
Tested by: jims
Tilghman Lesher [Thu, 7 May 2009 17:13:36 +0000 (17:13 +0000)]
Send DTMF frame before playing back audio.
(closes issue #14858)
Reported by: barryf
Patches:
20090507__bug14858.diff.txt uploaded by tilghman (license 14)
Eliminate repetition of fullcontact during reconstruction.
If the fullcontact field appears in both the sippeers and the
sipregs table, then during reconstruction of the field, it will
otherwise be doubled.
(closes issue #14754)
Reported by: Alexei Gradinari
Patches:
20090506__bug14754.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen
........
Make ParkedCall application stop execution of the dialplan after hang up
Just changed park_exec to always return non-zero. I really wasn't entirely sure
at first if this was a bug. Decided it was since it would be surprising when
not using ParkedCall in the dialplan to hang up and have dialplan execution
continue.
Joshua Colp [Wed, 6 May 2009 17:38:51 +0000 (17:38 +0000)]
Fix a bug where a timer would be created but not acknowledged.
This scenario crept up if chan_iax2 was loaded with no configuration file present.
It would create a timer and tell it to go at an interval but the thread that normally
acknowledges it would not be created because no configuration file was present. The timer
will now be closed if no configuration file is present.
Tilghman Lesher [Wed, 6 May 2009 16:28:02 +0000 (16:28 +0000)]
Add numbers in Urdu, the national language of Pakistan
(closes issue #15034)
Reported by: nasirq
Patches:
ast_say_number_full_ur-patch.c uploaded by nasirq (license 772)
urdu.ods uploaded by nasirq (license 772)
Fix an incorrect assumption that certain values on the channel will always exist when they may not.
The CDR code involved with bridges wrongly assumed that the currently executing application and data
values will always exist. It is possible for this to be false when call forwarding is involved.
Revert CPC patch for now, until I decide whether or not it all should be merged into libss7/1.0 (It's still in the bug13495 branch and in libss7/trunk)
Joshua Colp [Tue, 5 May 2009 14:22:47 +0000 (14:22 +0000)]
Fix a bug with setting t38pt_udptl at the user or peer level.
If an incoming call authenticated as a user or peer and t38pt_udptl was
not set to yes in general then no UDPTL session would be present and any
T38 related things would fail. This commit changes it so that if after
authenticating T38 is enabled but no UDPTL session is present one will be
created.
Correct some flaws in the memory accounting code for stringfields and ao2 objects
Under some conditions, the memory allocation for stringfields and ao2 objects would not have supplied valid file/function names for MALLOC_DEBUG tracking, so this commit corrects that.
Properly account for memory allocated for channels and datastores
As in previous commits, when channels are allocated (with ast_channel_alloc) or datastores are allocated (with ast_datastore_alloc) properly account for the memory being owned by the caller, instead of the allocator function itself.
Ensure that string pools allocated to hold stringfields are properly accounted in MALLOC_DEBUG mode
This commit modifies the stringfield pool allocator to remember the 'owner' of the stringfield manager the pool is being allocated for, and ensures that pools allocated in the future when fields are populated are owned by that file/function.
Ensure that astobj2 memory allocations are properly accounted for when MALLOC_DEBUG is used
This commit ensures that all astobj2 allocated objects are properly accounted for in MALLOC_DEBUG mode by passing down the file/function/line information from the module/function that actually called the astobj2 allocation function.
Correct command description in test_sched.c and include asterisk/cli.h in test_skel.c, since it's highly unlikely that a test module will *not* want to provide CLI commands to execute the tests
Ensure that by default only one console channel driver is loaded
This configuration file was changed to ensure that only one console channel driver
(chan_oss) is loaded by default, but the change would only work if chan_console
was not built. Now it will work as expected; if chan_alsa or chan_console are built
and installed, they will not be loaded unless explicity requested.
Add 'bitflags'-style information elements to event framework
This patch add a new payload type for information elements, a set
of bit flags. The payload is transported as a 32-bit unsigned integer
but when matching is performed between events and subscribers,
the matching is done by using a bitwise AND instead of numeric value
comparison.
Russell Bryant [Sat, 2 May 2009 21:15:18 +0000 (21:15 +0000)]
Do a bit of code cleanup.
- convert handling of IE PLTYPEs to switch statements
- add braces to various small blocks
- remove a bit of trailing whitespace
- remove a couple of unnecessary ast_strdupa() uses
In discussions today at the Europe Asterisk Developer Meet-Up, we determined that
the event_log was used in only 9 places in the entire tree, and really was not needed
at all. The users have been converted to use LOG_NOTICE, or the messages have been
removed since other messages were already in place that provided the same information.
Fix an error in queue_log file rotation optimization code
This code was copy-and-pasted without properly changing references to event_rotate into queue_rotate, so under some conditions the log rotation would rotate queue_log even though it was not necessary.
Move static buffers to outside for loops in app_chanspy.
Similar to seanbright's commit 191422, this moves some static buffers
to be defined outside of for loops since it is undefined if memory
will be re-used or if the stack will grow with each iteration of the
loop.
........
r191629 | mmichelson | 2009-05-02 05:45:24 -0500 (Sat, 02 May 2009) | 3 lines
Kevin has informed me that thi sort of thing is not necessary.
........
Fix DTMF not being sent to other side after a partial feature match
This fixes a regression from commit 176701. The issue was that
ast_generic_bridge never exited after the feature digit timeout had elapsed,
which prevented the queued DTMF from being sent to the other side.
Fix a crash in app_queue with very long member lists.
A user reported via #asterisk that with very long lists of members, a crash
occurs in ast_strdupa, so just use a single buffer and ast_copy_string instead
of stack allocating copys of each interface name.
........
r191422 | seanbright | 2009-05-01 11:42:48 -0400 (Fri, 01 May 2009) | 7 lines
Move the defintion of the a couple arrays out of loops.
According to Kevin, it is unspecified as to whether a variable defined inside
a block is allocated once by the compiler or for each pass through the block
(loops being the only interesting case), so just define these before we get
into our loop to be sure.
........
Kevin P. Fleming [Thu, 30 Apr 2009 21:42:35 +0000 (21:42 +0000)]
Add buffer and echo canceller control to CHANNEL() dialplan function for DAHDI channels
Adds ability for CHANNEL() dialplan function, when used on DAHDI channels,
to temporarily change the number of buffers and/or the buffer policy, and also
to enable, disable, or switch the echo canceller between FAX/data and voice
modes.
Change working directory to / under certain conditions.
If backgrounding and no core will be produced, then changing the directory
won't break anything; likewise, if the CWD isn't accessible by the current
user, then a core wasn't possible anyway.
(closes issue #14831)
Reported by: chris-mac
Patches:
20090428__bug14831.diff.txt uploaded by tilghman (license 14)
20090430__bug14831.diff.txt uploaded by tilghman (license 14)
Tested by: chris-mac
David Vossel [Wed, 29 Apr 2009 21:13:43 +0000 (21:13 +0000)]
SIP option to specify outbound TLS/SSL client protocol.
chan_sip allows for outbound TLS connections, but does not allow the user to specify what protocol to use (default was SSLv2, and still is if this new option is not specified). This patch lets the user pick the SSL/TLS client method for outbound connections in sip.
Richard Mudgett [Wed, 29 Apr 2009 21:07:06 +0000 (21:07 +0000)]
Outgoing PTP redirected calls did not wait for the COLR from the redirected-to party.
For outgoing PTP redirected calls, you now need to use the inhibit(i)
option on all of the REDIRECTING statements before dialing the redirected-to
party. You still have to set the REDIRECTING(to-xxx,i) and the
REDIRECTING(from-xxx,i) values. The PTP call will update the redirecting-to
presentation when it becomes available and queue the redirecting update to
the calling channel.
Merge str_substitution branch.
This branch adds additional methods to dialplan functions, whereby the result
buffers are now dynamic buffers, which can be expanded to the size of any
result. No longer are variable substitutions limited to 4095 bytes of data.
In addition, the common case of needing buffers much smaller than that will
enable substitution to only take up the amount of memory actually needed.
The existing variable substitution routines are still available, but users
of those API calls should transition to using the dynamic-buffer APIs.
Reviewboard: http://reviewboard.digium.com/r/174/
David Vossel [Wed, 29 Apr 2009 14:39:48 +0000 (14:39 +0000)]
Consistent SSL/TLS options across conf files
ast_tls_read_conf() is a new api call for handling SSL/TLS options across all conf files. Before this change, SSL/TLS options were not consistent. http.conf and manager.conf required the 'ssl' prefix while sip.conf used options with the 'tls' prefix. While the options had different names in different conf files, they all did the exact same thing. Now, instead of mixing 'ssl' or 'tls' prefixes to do the same thing depending on what conf file you're in, all SSL/TLS options use the 'tls' prefix. For example. 'sslenable' in http.conf and manager.conf is now 'tlsenable' which matches what already existed in sip.conf. Since this has the potential to break backwards compatibility, previous options containing the 'ssl' prefix still work, but they are no longer documented in the sample.conf files. The change is noted in the CHANGES file though.
Kevin P. Fleming [Tue, 28 Apr 2009 14:12:09 +0000 (14:12 +0000)]
Remove Makefile rules for bison and flex sources
We never, ever want these files to processed automatically, because we store the output files in Subversion and users should never need to rebuild them.
Richard Mudgett [Mon, 27 Apr 2009 20:03:49 +0000 (20:03 +0000)]
Make PTP DivertingLegInformation3 message behavior closer to the specifications.
* Wait for a DivertingLegInformation3 message after receiving a
DivertingLegInformation1 message to complete the redirecting-to information
before queuing a redirecting update to the other channel.
* A DivertingLegInformation2 message should be responded to with a
DivertingLegInformation3 when the COLR is determined. If the call
could or does experience another redirection, you should manually
determine the COLR to send to the switch by setting REDIRECTING(to-pres)
to the COLR and setting REDIRECTING(to-num) = ${EXTEN}.
* A DivertingLegInformation2 message must have an original called number
if the redirection count is greater than one. Since Asterisk does
not keep track of this information, we can only indicate that the
number is not available due to interworking.
Fix 'inconsistent line endings' when autoconf 2.63 is used
Attempt to make configure script regeneration 'safe' using autoconf 2.63, which embeds a bare CR into the script, thus making Subversion complain about inconsistent line endings
This commit changes the MIME type of the configure script to be 'binary' thus making Subversion no longer inspect line endings, and as a bonus 'svn diff' will no longer try to generate diff output for it, which is not generally useful anyway.
........
Resolve a crash in res_smdi when used with chan_dahdi.
When chan_dahdi goes to get an SMDI message, it provides no search criteria.
It just grabs the next message that arrives. This code was written with the
SMDI dialplan functions in mind, since that is now the preferred method of
using SMDI. However, this broke support of it being used from chan_dahdi.
Mark Michelson [Mon, 27 Apr 2009 16:37:51 +0000 (16:37 +0000)]
Allow for a position to be specified when entering a queue.
This would allow for one to add a caller to a specific place in the
queue instead of just placing the caller in the back every time. To help
facilitate some interesting manipulations, a new channel variable called
QUEUEPOSITION has been added. When a caller is removed from a queue, his
position in that queue is stored in the QUEUEPOSITION variable. One such
strategy an administrator can employ is to allow for the removal of a caller
from one queue followed by the insertion of the same caller into a separate
queue in the same position.
Fix a bug where we tried to send events out when no sessions container was present.
This commit stops a warning message (user_data is NULL) from getting output when
manager events get sent before manager is initialized. This happens because manager
is initialized *after* modules are loaded and the act of loading modules triggers
manager events.
David Vossel [Fri, 24 Apr 2009 21:22:31 +0000 (21:22 +0000)]
TLS/SSL private key option
Adds option to specify a private key .pem file when configuring TLS or SSL in AMI, HTTP, and SIP. Before this, the certificate file was used for both the public and private key. It is possible for this file to hold both, but most configurations allow for a separate private key file to be specified. Clarified in .conf files how these options are to be used. The current conf files do not explain how the private key is handled at all, so without knowledge of Asterisk's TLS implementation, it would be hard to know for sure what was going on or how to set it up.
projects / thirdparty / asterisk.git / log
