Removal of the DG2 pre-production workarounds has left duplicate
condition blocks in a couple places, as well as some inconsistent
platform ordering. Reshuffle and consolidate some of the workarounds to
reduce the number of condition blocks and to more consistently follow
the "newest platform first" convention. Code movement only; no
functional change.
DG2 first production steppings were C0 (for DG2-G10), B1 (for DG2-G11),
and A1 (for DG2-G12). Several workarounds that apply onto to
pre-production hardware can be dropped. Furthermore, several
workarounds that apply to all production steppings can have their
conditions simplified to no longer check the GT stepping.
v2:
- Keep Wa_16011777198 in place for now; it will be removed separately
in a follow-up patch to keep review easier.
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was : 8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize.
Fixes: 7026b1ddb6b8 ("netfilter: Pass socket pointer down through okfn().") Diagnosed-by: Eric Dumazet <edumazet@google.com> Reported-by: xingwei lee <xrivendell7@gmail.com> Reported-by: yue sun <samsun1006219@gmail.com> Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI11x1x Rev B0 devices might drop packets when receiving back to back frames
at 2.5G link speed. Change the B0 Rev device's Receive filtering Engine FIFO
threshold parameter from its hardware default of 4 to 3 dwords to prevent the
problem. Rev C0 and later hardware already defaults to 3 dwords.
Skip hook unregistration when adding or deleting devices from an
existing netdev basechain. Otherwise, commit/abort path try to
unregister hooks which not enabled.
Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain") Fixes: 7d937b107108 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
netdev basechain updates are stored in the transaction object hook list.
When setting on the table dormant flag, it iterates over the existing
hooks in the basechain. Thus, skipping the hooks that are being
added/deleted in this transaction, which leaves hook registration in
inconsistent state.
Reject table flag updates in combination with netdev basechain updates
in the same batch:
- Update table flags and add/delete basechain: Check from basechain update
path if there are pending flag updates for this table.
- add/delete basechain and update table flags: Iterate over the transaction
list to search for basechain updates from the table update path.
In both cases, the batch is rejected. Based on suggestion from Florian Westphal.
Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain") Fixes: 7d937b107108f ("netfilter: nf_tables: support for deleting devices in an existing netdev chain") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Report EOPNOTSUPP if NFT_MSG_DESTROYCHAIN is used to delete hooks in an
existing netdev basechain, thus, only NFT_MSG_DELCHAIN is allowed.
Fixes: 7d937b107108f ("netfilter: nf_tables: support for deleting devices in an existing netdev chain") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
fscache emits a lot of duplicate cookie warnings with cifs because the
index key for the fscache cookies does not include everything that the
cifs_find_inode() function does. The latter is used with iget5_locked() to
distinguish between inodes in the local inode cache.
Fix this by adding the creation time and file type to the fscache cookie
key.
Additionally, add a couple of comments to note that if one is changed the
other must be also.
Signed-off-by: David Howells <dhowells@redhat.com> Fixes: 70431bfd825d ("cifs: Support fscache indexing rewrite")
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch re-introduces protection against the size of access to stack
memory being negative; the access size can appear negative as a result
of overflowing its signed int representation. This should not actually
happen, as there are other protections along the way, but we should
protect against it anyway. One code path was missing such protections
(fixed in the previous patch in the series), causing out-of-bounds array
accesses in check_stack_range_initialized(). This patch causes the
verification of a program with such a non-sensical access size to fail.
This check used to exist in a more indirect way, but was inadvertendly
removed in a833a17aeac7.
The mlxbf_gige driver encounters a NULL pointer exception in
mlxbf_gige_open() when kdump is enabled. The sequence to reproduce
the exception is as follows:
a) enable kdump
b) trigger kdump via "echo c > /proc/sysrq-trigger"
c) kdump kernel executes
d) kdump kernel loads mlxbf_gige module
e) the mlxbf_gige module runs its open() as the
the "oob_net0" interface is brought up
f) mlxbf_gige module will experience an exception
during its open(), something like:
The exception happens because there is a pending RX interrupt before the
call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires
immediately after this request_irq() completes. The RX IRQ handler runs
"napi_schedule()" before NAPI is fully initialized via "netif_napi_add()"
and "napi_enable()", both which happen later in the open() logic.
The logic in mlxbf_gige_open() must fully initialize NAPI before any calls
to request_irq() execute.
At the start of tls_sw_recvmsg, we take a reference on the psock, and
then call tls_rx_reader_lock. If that fails, we return directly
without releasing the reference.
Instead of adding a new label, just take the reference after locking
has succeeded, since we don't need it before.
process_rx_list may not copy as many bytes as we want to the userspace
buffer, for example in case we hit an EFAULT during the copy. If this
happens, we should only count the bytes that were actually copied,
which may be 0.
Subtracting async_copy_bytes is correct in both peek and !peek cases,
because decrypted == async_copy_bytes + peeked for the peek case: peek
is always !ZC, and we can go through either the sync or async path. In
the async case, we add chunk to both decrypted and
async_copy_bytes. In the sync case, we add chunk to both decrypted and
peeked. I missed that in commit 6caaf104423d ("tls: fix peeking with
sync+async decryption").
Only MSG_PEEK needs to copy from an offset during the final
process_rx_list call, because the bytes we copied at the beginning of
tls_sw_recvmsg were left on the rx_list. In the KVEC case, we removed
data from the rx_list as we were copying it, so there's no need to use
an offset, just like in the normal case.
Currently, loopback test may be skipped when resetting, but the test
result will still show as 'PASS', because the driver doesn't set
ETH_TEST_FL_FAILED flag. Fix it by setting the flag and
initializating the value to UNEXECUTED.
Fixes: 4c8dab1c709c ("net: hns3: reconstruct function hns3_self_test") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash. This patch fixes this by taking devl_lock during initialization.
Fixes: b741269b2759 ("net: hns3: add support for registering devlink for PF") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, hns hardware supports more than 512 queues and the index limit
in hclge_comm_tqps_update_stats is wrong. So this patch removes it.
Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Locally generated IP multicast packets (such as the ones used in the
test) do not perform routing and simply egress the bound device.
However, as explained in commit 8bcfb4ae4d97 ("selftests: forwarding:
Fix failing tests with old libnet"), old versions of libnet (used by
mausezahn) do not use the "SO_BINDTODEVICE" socket option. Specifically,
the library started using the option for IPv6 sockets in version 1.1.6
and for IPv4 sockets in version 1.2. This explains why on Ubuntu - which
uses version 1.1.6 - the IPv4 overlay tests are failing whereas the IPv6
ones are passing.
Fix by specifying the source and destination MAC of the packets which
will cause mausezahn to use a packet socket instead of an IP socket.
The inclusion of io-64-nonatomic-lo-hi.h indicates that all 64bit
accesses can be replaced by pairs of nonatomic 32bit access. Fix
alignment by forcing all accesses to be 32bit on 64bit platforms.
We had various syzbot reports about tcp timers firing after
the corresponding netns has been dismantled.
Fortunately Josef Bacik could trigger the issue more often,
and could test a patch I wrote two years ago.
When TCP sockets are closed, we call inet_csk_clear_xmit_timers()
to 'stop' the timers.
inet_csk_clear_xmit_timers() can be called from any context,
including when socket lock is held.
This is the reason it uses sk_stop_timer(), aka del_timer().
This means that ongoing timers might finish much later.
For user sockets, this is fine because each running timer
holds a reference on the socket, and the user socket holds
a reference on the netns.
For kernel sockets, we risk that the netns is freed before
timer can complete, because kernel sockets do not hold
reference on the netns.
This patch adds inet_csk_clear_xmit_timers_sync() function
that using sk_stop_timer_sync() to make sure all timers
are terminated before the kernel socket is released.
Modules using kernel sockets close them in their netns exit()
handler.
Also add sock_not_owned_by_me() helper to get LOCKDEP
support : inet_csk_clear_xmit_timers_sync() must not be called
while socket lock is held.
It is very possible we can revert in the future commit 3a58f13a881e ("net: rds: acquire refcount on TCP sockets")
which attempted to solve the issue in rds only.
(net/smc/af_smc.c and net/mptcp/subflow.c have similar code)
We probably can remove the check_net() tests from
tcp_out_of_resources() and __tcp_close() in the future.
Reported-by: Josef Bacik <josef@toxicpanda.com> Closes: https://lore.kernel.org/netdev/20240314210740.GA2823176@perftesting/ Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Fixes: 8a68173691f0 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket") Link: https://lore.kernel.org/bpf/CANn89i+484ffqb93aQm1N-tjxxvb3WDKX0EbD7318RwRgsatjw@mail.gmail.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Josef Bacik <josef@toxicpanda.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/20240322135732.1535772-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e748d0fd66ab ("net: hsr: Disable promiscuous mode in
offload mode") disables promiscuous mode of slave devices
while creating an HSR interface. But while deleting the
HSR interface, it does not take care of it. It decreases the
promiscuous mode count, which eventually enables promiscuous
mode on the slave devices when creating HSR interface again.
Fix this by not decrementing the promiscuous mode count while
deleting the HSR interface when offload is enabled.
Fixes: e748d0fd66ab ("net: hsr: Disable promiscuous mode in offload mode") Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240322100447.27615-1-r-gunasekaran@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The IO subsystem expects a driver to retry a ccw_device_start, when the
subsequent interrupt response block (irb) contains a deferred
condition code 1.
Symptoms before this commit:
On the read channel we always trigger the next read anyhow, so no
different behaviour here.
On the write channel we may experience timeout errors, because the
expected reply will never be received without the retry.
Other callers of qeth_send_control_data() may wrongly assume that the ccw
was successful, which may cause problems later.
Note that since
commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
and
commit 5ef1dc40ffa6 ("s390/cio: fix invalid -EBUSY on ccw_device_start")
deferred CC1s are much more likely to occur. See the commit message of the
latter for more background information.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Co-developed-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Link: https://lore.kernel.org/r/20240321115337.3564694-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The initial igc Tx timestamping implementation used only one register for
retrieving Tx timestamps. Commit 3ed247e78911 ("igc: Add support for
multiple in-flight TX timestamps") added support for utilizing all four of
them e.g., for multiple domain support. Remove the stale comment/FIXME.
Fixes: 3ed247e78911 ("igc: Add support for multiple in-flight TX timestamps") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change kzalloc() flags used in ixgbe_ipsec_vf_add_sa() to GFP_ATOMIC, to
avoid sleeping in IRQ context.
Dan Carpenter, with the help of Smatch, has found following issue:
The patch eda0333ac293: "ixgbe: add VF IPsec management" from Aug 13,
2018 (linux-next), leads to the following Smatch static checker
warning: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c:917 ixgbe_ipsec_vf_add_sa()
warn: sleeping in IRQ context
The call tree that Smatch is worried about is:
ixgbe_msix_other() <- IRQ handler
-> ixgbe_msg_task()
-> ixgbe_rcv_msg_from_vf()
-> ixgbe_ipsec_vf_add_sa()
Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/intel-wired-lan/db31a0b0-4d9f-4e6b-aed8-88266eb5665c@moroto.mountain Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ice driver would previously panic after suspend. This is caused
from the driver *only* calling the ice_vsi_free_q_vectors() function by
itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent
NULL pointer deref during reload") the driver has zeroed out
num_q_vectors, and only restored it in ice_vsi_cfg_def().
This further causes the ice_rebuild() function to allocate a zero length
buffer, after which num_q_vectors is updated, and then the new value of
num_q_vectors is used to index into the zero length buffer, which
corrupts memory.
The fix entails making sure all the code referencing num_q_vectors only
does so after it has been reset via ice_vsi_cfg_def().
I didn't perform a full bisect, but I was able to test against 6.1.77
kernel and that ice driver works fine for suspend/resume with no panic,
so sometime since then, this problem was introduced.
Also clean up an un-needed init of a local variable in the function
being modified.
Previously only case when queues amount is lower was covered. Implement
realloc for case when queues amount is higher than previous one. Use
krealloc() function and zero new allocated elements.
It has to be done before ice_vsi_def_cfg(), because stats element for
ring is set there.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 1cb7fdb1dfde ("ice: fix memory corruption bug with suspend and rebuild") Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the datasheet, the recipe association data is an 8-byte
little-endian value. It is described as 'Bitmap of the recipe indexes
associated with this profile', it is from 24 to 31 byte area in FW.
Therefore, it is defined to '__le64 recipe_assoc' in struct
ice_aqc_recipe_to_profile. And then fix the bitmap casting issue, as we
must never ever use castings for bitmap type.
Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Steven Zou <steven.zou@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When releasing frames from the reorder buffer, the link ID was not
included in the RX status information. This subsequently led mac80211 to
drop the frame. Change it so that the link information is set
immediately when possible so that it doesn't not need to be filled in
anymore when submitting the frame to mac80211.
Fixes: b8a85a1d42d7 ("wifi: iwlwifi: mvm: rxmq: report link ID to mac80211") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.bbbd5e9bfe80.Iec1bf5c884e371f7bc5ea2534ed9ea8d3f2c0bf6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Multi rx queue allows to spread the load of the Rx streams on different
CPUs. 9000 series required complex synchronization mechanisms from the
driver side since the hardware / firmware is not able to provide
information about duplicate packets and timeouts inside the reordering
buffer.
Users have complained that for newer devices, all those synchronization
mechanisms have caused spurious packet drops. Those packet drops
disappeared if we simplify the code, but unfortunately, we can't have
RSS enabled on 9000 series without this complex code.
Remove support for RSS on 9000 so that we can make the code much simpler
for newer devices and fix the bugs for them.
The down side of this patch is a that all the Rx path will be routed to
a single CPU, but this has never been an issue, the modern CPUs are just
fast enough to cope with all the traffic.
When we set members of simple nested structures in requests
we need to set "presence" bits for all the nesting layers
below. This has nothing to do with the presence type of
the last layer.
Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink") Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240321020214.1250202-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported the following uninit-value access issue [1][2]:
nci_rx_work() parses and processes received packet. When the payload
length is zero, each message type handler reads uninitialized payload
and KMSAN detects this issue. The receipt of a packet with a zero-size
payload is considered unexpected, and therefore, such packets should be
silently discarded.
This patch resolved this issue by checking payload size before calling
each message type handler codes.
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Reported-and-tested-by: syzbot+7ea9413ea6749baf5574@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+29b5ca705d2e0f4a44d2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7ea9413ea6749baf5574 [1] Closes: https://syzkaller.appspot.com/bug?extid=29b5ca705d2e0f4a44d2 [2] Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com> Reviewed-by: Jeremy Cline <jeremy@jcline.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the
generated insn reverses byte order for both high and low 32-bit words,
resuling in an incorrect swap as indicated by the jit test:
If due to a memory allocation failure mock_chain() returns NULL, it is
passed to dma_fence_enable_sw_signaling() resulting in NULL pointer
dereference there.
Call dma_fence_enable_sw_signaling() only if mock_chain() succeeds.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d62c43a953ce ("dma-buf: Enable signaling on fence for selftests") Signed-off-by: Pavel Sakharov <p.sakharov@ispras.ru> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240319231527.1821372-1-p.sakharov@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
This is caused by GCC moving memcpy() after assignments in
bpf_jit_plt(), resulting in NULL pointers being written instead of
the return and the target addresses.
Looking at the GCC internals, the reordering is allowed because the
alias analysis thinks that the memcpy() destination and the assignments'
left-hand-sides are based on different objects: new_plt and
bpf_plt_ret/bpf_plt_target respectively, and therefore they cannot
alias.
This is in turn due to a violation of the C standard:
When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object
...
From the C's perspective, bpf_plt_ret and bpf_plt are distinct objects
and cannot be subtracted. In the practical terms, doing so confuses the
GCC's alias analysis.
The code was written this way in order to let the C side know a few
offsets defined in the assembly. While nice, this is by no means
necessary. Fix the noncompliance by hardcoding these offsets.
Calling i915_gem_object_get_dma_address() from the vblank
evade critical section triggers might_sleep().
While we know that we've already pinned the framebuffer
and thus i915_gem_object_get_dma_address() will in fact
not sleep in this case, it seems reasonable to keep the
unconditional might_sleep() for maximum coverage.
So let's instead pre-populate the dma address during
fb pinning, which all happens before we enter the
vblank evade critical section.
We can use u32 for the dma address as this class of
hardware doesn't support >32bit addresses.
The bug can be triggered by sending a single amdgpu_gem_userptr_ioctl
to the AMDGPU DRM driver on any ASICs with an invalid address and size.
The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>.
For example the following code:
static void Syzkaller1(int fd)
{
struct drm_amdgpu_gem_userptr arg;
int ret;
Due to the address and size are not valid there is a failure in
amdgpu_hmm_register->mmu_interval_notifier_insert->__mmu_interval_notifier_insert->
check_shl_overflow, but we even the amdgpu_hmm_register failure we still call
amdgpu_hmm_unregister into amdgpu_gem_object_free which causes access to a bad address.
The following stack is below when the issue is reproduced when Kazan is enabled:
Include the header that defines u32.
This fixes build of 6.6.23 and 6.1.83 kernels for Alpine Linux, which
uses musl libc. I assume that GNU libc indirecly pulls in linux/types.h.
Fixes: 9707ac4fe2f5 ("tools/resolve_btfids: Refactor set sorting with types from btf_ids.h") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218647 Cc: stable@vger.kernel.org Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Tested-by: Greg Thelen <gthelen@google.com> Link: https://lore.kernel.org/r/20240328110103.28734-1-ncopa@alpinelinux.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SEV-SNP requires encrypted memory to be validated before access.
Because the ROM memory range is not part of the e820 table, it is not
pre-validated by the BIOS. Therefore, if a SEV-SNP guest kernel wishes
to access this range, the guest must first validate the range.
The current SEV-SNP code does indeed scan the ROM range during early
boot and thus attempts to validate the ROM range in probe_roms().
However, this behavior is neither sufficient nor necessary for the
following reasons:
* With regards to sufficiency, if EFI_CONFIG_TABLES are not enabled and
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK is set, the kernel will
attempt to access the memory at SMBIOS_ENTRY_POINT_SCAN_START (which
falls in the ROM range) prior to validation.
For example, Project Oak Stage 0 provides a minimal guest firmware
that currently meets these configuration conditions, meaning guests
booting atop Oak Stage 0 firmware encounter a problematic call chain
during dmi_setup() -> dmi_scan_machine() that results in a crash
during boot if SEV-SNP is enabled.
* With regards to necessity, SEV-SNP guests generally read garbage
(which changes across boots) from the ROM range, meaning these scans
are unnecessary. The guest reads garbage because the legacy ROM range
is unencrypted data but is accessed via an encrypted PMD during early
boot (where the PMD is marked as encrypted due to potentially mapping
actually-encrypted data in other PMD-contained ranges).
In one exceptional case, EISA probing treats the ROM range as
unencrypted data, which is inconsistent with other probing.
Continuing to allow SEV-SNP guests to use garbage and to inconsistently
classify ROM range encryption status can trigger undesirable behavior.
For instance, if garbage bytes appear to be a valid signature, memory
may be unnecessarily reserved for the ROM range. Future code or other
use cases may result in more problematic (arbitrary) behavior that
should be avoided.
While one solution would be to overhaul the early PMD mapping to always
treat the ROM region of the PMD as unencrypted, SEV-SNP guests do not
currently rely on data from the ROM region during early boot (and even
if they did, they would be mostly relying on garbage data anyways).
As a simpler solution, skip the ROM range scans (and the otherwise-
necessary range validation) during SEV-SNP guest early boot. The
potential SEV-SNP guest crash due to lack of ROM range validation is
thus avoided by simply not accessing the ROM range.
In most cases, skip the scans by overriding problematic x86_init
functions during sme_early_init() to SNP-safe variants, which can be
likened to x86_init overrides done for other platforms (ex: Xen); such
overrides also avoid the spread of cc_platform_has() checks throughout
the tree.
In the exceptional EISA case, still use cc_platform_has() for the
simplest change, given (1) checks for guest type (ex: Xen domain status)
are already performed here, and (2) these checks occur in a subsys
initcall instead of an x86_init function.
[ bp: Massage commit message, remove "we"s. ]
Fixes: 9704c07bf9f7 ("x86/kernel: Validate ROM memory before accessing when SEV-SNP is active") Signed-off-by: Kevin Loughlin <kevinloughlin@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20240313121546.2964854-1-kevinloughlin@google.com Signed-off-by: Kevin Loughlin <kevinloughlin@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As of commit d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to
update PHY info"), do discovery will send a new SMP_DISCOVER and update
phy->phy_change_count. We found that if the disk is reconnected and phy
change_count changes at this time, the disk scanning process will not be
triggered.
Therefore, call sas_set_ex_phy() to update the PHY info with the results of
the last query. And because the previous phy info will be used when calling
sas_unregister_devs_sas_addr(), sas_unregister_devs_sas_addr() should be
called before sas_set_ex_phy().
Fixes: d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to update PHY info") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240307141413.48049-3-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper to get attached_sas_addr and device type from disc_resp.
Suggested-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240307141413.48049-2-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wqe is of type lpfc_wqe128. It should be memset with the same type.
Fixes: 6c621a2229b0 ("scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20240304090649.833953-1-usama.anjum@collabora.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Justin Tee <justintee8345@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel Arrow Lake CPU uses the Meteor Lake ID with this
controller (the controller that's part of the Intel Arrow
Lake chipset (PCH) does still have unique PCI ID).
Fixes: de4b5b28c87c ("usb: dwc3: pci: add support for the Intel Arrow Lake-H") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240312115008.1748637-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was originally in x86/urgent, but was deemed wrong so got zapped.
But in the meantime, x86/urgent had been merged into x86/apic to
resolve a conflict. I didn't notice the merge so didn't zap it
from x86/apic and it managed to make it up with the x86/apic
material.
The reverted commit is known to cause some KASAN problems.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro used for MDS mitigation executes VERW with relative
addressing for the operand. This was necessary in earlier versions of
the series. Now it is unnecessary and creates a problem for backports
on older kernels that don't support relocations in alternatives.
Relocation support was added by commit 270a69c4485d ("x86/alternative:
Support relocations in alternatives"). Also asm for fixed addressing
is much cleaner than relative RIP addressing.
Simplify the asm by using fixed addressing for VERW operand.
[ dhansen: tweak changelog ]
Closes: https://lore.kernel.org/lkml/20558f89-299b-472e-9a96-171403a83bd6@suse.com/ Fixes: baf8361e5455 ("x86/bugs: Add asm helpers for executing VERW") Reported-by: Nikolay Borisov <nik.borisov@suse.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240226-verw-arg-fix-v1-1-7b37ee6fd57d%40linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when PCI error is detected, I/O is aborted manually through the
ABORT IOCB mechanism which is not guaranteed to succeed.
Instead, wait for the OS or system to notify driver to wind down I/O
through the pci_error_handlers api. Set eeh_busy flag to pause all traffic
and wait for I/O to drain.
Upon driver unload, purge_mbox flag is set and the heartbeat monitor thread
detects this flag and does not send the mailbox command down to FW with a
debug message "Error detected: purge[1] eeh[0] cmd=0x0, Exiting". This
being not a real error, change the debug message.
Coverity scan reported potential risk of double free of the pointer
ha->vp_map. ha->vp_map was freed in qla2x00_mem_alloc(), and again freed
in function qla2x00_mem_free(ha).
Assign NULL to vp_map and kfree take care of NULL.
The system was under memory stress where driver was not able to allocate an
SRB to carry out error recovery of cable pull. The failure to flush causes
upper layer to start modifying scsi_cmnd. When the system frees up some
memory, the subsequent cable pull trigger another command flush. At this
point the driver access a null pointer when attempting to DMA unmap the
SGL.
Add a check to make sure commands are flush back on session tear down to
prevent the null pointer access.
Changing of [FCP|NVME] prefer flag in flash has no effect on driver. For
device that supports both FCP + NVMe over the same connection, driver
continues to connect to this device using the previous successful login
mode.
On completion of flash update, adapter will be reset. Driver will
reset the prefer flag based on setting from flash.
Disk failed to rediscover after chip reset error injection. The chip reset
happens at the time when a PLOGI is being sent. This causes a flag to be
left on which blocks the retry. Clear the blocking flag.
Currently IOCBs are allowed to push through while chip reset could be in
progress. During chip reset the outstanding_cmds array is cleared
twice. Once when any command on this array is returned as failed and
secondly when the array is initialize to zero. If a command is inserted on
to the array between these intervals, then the command will be lost. Check
for chip reset before sending IOCB.
Check the UCSI_CCI_RESET_COMPLETE complete flag before starting
another reset. Use a UCSI_SET_NOTIFICATION_ENABLE command to clear
the flag if it is set.
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-6-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some DELL systems don't like UCSI_ACK_CC_CI commands with the
UCSI_ACK_CONNECTOR_CHANGE but not the UCSI_ACK_COMMAND_COMPLETE
bit set. The current quirk still leaves room for races because
it requires two consecutive ACK commands to be sent.
Refactor and significantly simplify the quirk to fix this:
Send a dummy command and bundle the connector change ack with the
command completion ack in a single UCSI_ACK_CC_CI command.
This removes the need to probe for the quirk.
While there define flag bits for struct ucsi_acpi->flags in ucsi_acpi.c
and don't re-use definitions from ucsi.h for struct ucsi->flags.
Fixes: f3be347ea42d ("usb: ucsi_acpi: Quirk to ack a connector change ack cmd") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-5-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a command completes the OPM must send an ack. This applies
to unsupported commands, too.
Send the required ACK for unsupported commands.
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-4-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suppose we sleep on the PPM lock after clearing the EVENT_PENDING
bit because the thread for another connector is executing a command.
In this case the command completion of the other command will still
report the connector change for our connector.
Clear the EVENT_PENDING bit under the PPM lock to avoid another
useless call to ucsi_handle_connector_change() in this case.
Fixes: c9aed03a0a68 ("usb: ucsi: Add missing ppm_lock") Cc: stable <stable@kernel.org> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-2-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added functionality to exit from L1 state by device initiation
using remote wakeup signaling, in case when function driver queuing
request while core in L1 state.
Added exiting from the clock gating mode on USB Reset Detect interrupt
if core in the clock gating mode.
Added new condition to check core in clock gating mode or no.
Fixed ISOC completion flow in DDMA mode. Added isoc
descriptor actual length value and update urb's start_frame
value.
Fixed initialization of ISOC DMA descriptors flow.
Fixes: 56f5b1cff22a ("staging: Core files for the DWC2 driver") Fixes: 20f2eb9c4cf8 ("staging: dwc2: add microframe scheduler from downstream Pi kernel") Fixes: c17b337c1ea4 ("usb: dwc2: host: program descriptor for next frame") Fixes: dc4c76e7b22c ("staging: HCD descriptor DMA support for the DWC2 driver") Fixes: 762d3a1a9cd7 ("usb: dwc2: host: process all completed urbs") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/a8b1e1711cc6cabfb45d92ede12e35445c66f06c.1708944698.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The show and store callback routines for the "disable" sysfs attribute
file in port.c acquire the device lock for the port's parent hub
device. This can cause problems if another process has locked the hub
to remove it or change its configuration:
Removing the hub or changing its configuration requires the
hub interface to be removed, which requires the port device
to be removed, and device_del() waits until all outstanding
sysfs attribute callbacks for the ports have returned. The
lock can't be released until then.
But the disable_show() or disable_store() routine can't return
until after it has acquired the lock.
The resulting deadlock can be avoided by calling
sysfs_break_active_protection(). This will cause the sysfs core not
to wait for the attribute's callback routine to return, allowing the
removal to proceed. The disadvantage is that after making this call,
there is no guarantee that the hub structure won't be deallocated at
any moment. To prevent this, we have to acquire a reference to it
first by calling hub_get().
Create hub_get() and hub_put() routines to encapsulate the kref_get()
and kref_put() calls in hub.c. The new routines will be used by the
next patch in this series.
Among the attribute file callback routines in
drivers/usb/core/sysfs.c, the interface_authorized_store() function is
the only one which acquires a device lock on an ancestor device: It
calls usb_deauthorize_interface(), which locks the interface's parent
USB device.
The will lead to deadlock if another process already owns that lock
and tries to remove the interface, whether through a configuration
change or because the device has been disconnected. As part of the
removal procedure, device_del() waits for all ongoing sysfs attribute
callbacks to complete. But usb_deauthorize_interface() can't complete
until the device lock has been released, and the lock won't be
released until the removal has finished.
The mechanism provided by sysfs to prevent this kind of deadlock is
to use the sysfs_break_active_protection() function, which tells sysfs
not to wait for the attribute callback.
Reported-and-tested by: Yue Sun <samsun1006219@gmail.com>
Reported by: xingwei lee <xrivendell7@gmail.com>
If the device is configured for system wakeup, then make sure that the
xHCI driver knows about it and make sure to permit wakeup only at the
appropriate time.
For host mode, if the controller goes through the dwc3 code path, then a
child xHCI platform device is created. Make sure the platform device
also inherits the wakeup setting for xHCI to enable remote wakeup.
For device mode, make sure to disable system wakeup if no gadget driver
is bound. We may experience unwanted system wakeup due to the wakeup
signal from the controller PMU detecting connection/disconnection when
in low power (D3). E.g. In the case of Steam Deck, the PCI PME prevents
the system staying in suspend.
The m.u.component_create.pid field is for debugging and in the mainline
kernel it's not used anything. However, it still needs to be set to
something to prevent disclosing uninitialized stack data. Set it to
zero.
Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.") Cc: stable <stable@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/2d972847-9ebd-481b-b6f9-af390f5aabd3@moroto.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc-14 warns about this strncpy() that results in a non-terminated
string for an overflow:
In file included from include/linux/string.h:369,
from drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c:20:
In function 'strncpy',
inlined from 'create_component' at drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c:940:2:
include/linux/fortify-string.h:108:33: error: '__builtin_strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation]
Change it to strscpy_pad(), which produces a properly terminated and
zero-padded string.
Commit fc663711b944 ("scsi: core: Remove the /proc/scsi/${proc_name}
directory earlier") fixed a bug related to modules loading/unloading, by
adding a call to scsi_proc_hostdir_rm() on scsi_remove_host(). But that led
to a potential duplicate call to the hostdir_rm() routine, since it's also
called from scsi_host_dev_release(). That triggered a regression report,
which was then fixed by commit be03df3d4bfe ("scsi: core: Fix a procfs host
directory removal regression"). The fix just dropped the hostdir_rm() call
from dev_release().
But it happens that this proc directory is created on scsi_host_alloc(),
and that function "pairs" with scsi_host_dev_release(), while
scsi_remove_host() pairs with scsi_add_host(). In other words, it seems the
reason for removing the proc directory on dev_release() was meant to cover
cases in which a SCSI host structure was allocated, but the call to
scsi_add_host() didn't happen. And that pattern happens to exist in some
error paths, for example.
Syzkaller causes that by using USB raw gadget device, error'ing on
usb-storage driver, at usb_stor_probe2(). By checking that path, we can see
that the BadDevice label leads to a scsi_host_put() after a SCSI host
allocation, but there's no call to scsi_add_host() in such path. That leads
to messages like this in dmesg (and a leak of the SCSI host proc
structure):
usb-storage 4-1:87.51: USB Mass Storage device detected
proc_dir_entry 'scsi/usb-storage' already registered
WARNING: CPU: 1 PID: 3519 at fs/proc/generic.c:377 proc_register+0x347/0x4e0 fs/proc/generic.c:376
The proper fix seems to still call scsi_proc_hostdir_rm() on dev_release(),
but guard that with the state check for SHOST_CREATED; there is even a
comment in scsi_host_dev_release() detailing that: such conditional is
meant for cases where the SCSI host was allocated but there was no calls to
{add,remove}_host(), like the usb-storage case.
This is what we propose here and with that, the error path of usb-storage
does not trigger the warning anymore.
Reported-by: syzbot+c645abf505ed21f931b5@syzkaller.appspotmail.com Fixes: be03df3d4bfe ("scsi: core: Fix a procfs host directory removal regression") Cc: stable@vger.kernel.org Cc: Bart Van Assche <bvanassche@acm.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Link: https://lore.kernel.org/r/20240313113006.2834799-1-gpiccoli@igalia.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop
management") introduced the manage_system_start_stop scsi_device flag to
allow libata to indicate to the SCSI disk driver that nothing should be
done when resuming a disk on system resume. This change turned the
execution of sd_resume() into a no-op for ATA devices on system
resume. While this solved deadlock issues during device resume, this change
also wrongly removed the execution of opal_unlock_from_suspend(). As a
result, devices with TCG OPAL locking enabled remain locked and
inaccessible after a system resume from sleep.
To fix this issue, introduce the SCSI driver resume method and implement it
with the sd_resume() function calling opal_unlock_from_suspend(). The
former sd_resume() function is renamed to sd_resume_common() and modified
to call the new sd_resume() function. For non-ATA devices, this result in
no functional changes.
In order for libata to explicitly execute sd_resume() when a device is
resumed during system restart, the function scsi_resume_device() is
introduced. libata calls this function from the revalidation work executed
on devie resume, a state that is indicated with the new device flag
ATA_DFLAG_RESUMING. Doing so, locked TCG OPAL enabled devices are unlocked
on resume, allowing normal operation.
The dreamcastcard->timer could schedule the spu_dma_work and the
spu_dma_work could also arm the dreamcastcard->timer.
When the snd_pcm_substream is closing, the aica_channel will be
deallocated. But it could still be dereferenced in the worker
thread. The reason is that del_timer() will return directly
regardless of whether the timer handler is running or not and
the worker could be rescheduled in the timer handler. As a result,
the UAF bug will happen. The racy situation is shown below:
In order to mitigate this bug and other possible corner cases,
call mod_timer() conditionally in run_spu_dma(), then implement
PCM sync_stop op to cancel both the timer and worker. The sync_stop
op will be called from PCM core appropriately when needed.
Fixes: 198de43d758c ("[ALSA] Add ALSA support for the SEGA Dreamcast PCM device") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Message-ID: <20240326094238.95442-1-duoming@zju.edu.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's possible the migration file is accessed after reset when it has
been cleaned up, especially when it's initiated by the device. This is
because the driver doesn't rip out the filep when cleaning up it only
frees the related page structures and sets its local struct
pds_vfio_lm_file pointer to NULL. This can cause a NULL pointer
dereference, which is shown in the example below during a restore after
a device initiated reset:
Add a disabled flag to the driver's struct pds_vfio_lm_file that gets
set during cleanup. Then make sure to check the flag when the migration
file is accessed via its file_operations. By default this flag will be
false as the memory for struct pds_vfio_lm_file is kzalloc'd, which means
the struct pds_vfio_lm_file is enabled and accessible. Also, since the
file_operations and driver's migration file cleanup happen under the
protection of the same pds_vfio_lm_file.lock, using this flag is thread
safe.
Fixes: 8512ed256334 ("vfio/pds: Always clear the save/restore FDs on reset") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Link: https://lore.kernel.org/r/20240308182149.22036-2-brett.creeley@amd.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
Not clearing the memory select bits prior to OPTC disable can cause DSC
corruption issues when attempting to reuse a memory instance for another
OPTC that enables ODM.
[How]
Clear the memory select bits prior to disabling an OPTC.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
If an OPP is used for a different OPTC without first being disconnected
from the previous OPTC, unexpected behaviour can occur. This also
applies to phantom pipes, which is what the current logic missed.
[How]
Disconnect OPPs from OPTC for phantom pipes before disabling OTG master.
Also move the disconnection to before the OTG master disable, since the
register is double buffered.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: b4e05bb1dec5 ("drm/amd/display: Clear OPTC mem select on disable") Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
Under some circumstances, disabling an OPTC and attempting to reclaim
its OPP(s) for a different OPTC could cause a hang/underflow due to OPPs
not being properly disconnected from the disabled OPTC.
[How]
Ensure that all OPPs are unassigned from an OPTC when it gets disabled.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: b4e05bb1dec5 ("drm/amd/display: Clear OPTC mem select on disable") Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
