Fix regression that changed behavior of queues when ringing a queue member.
This reverts r298596, which was to fix a highly bizarre and contrived issue
with a queue member that called into his own queue being transferred back
into his own queue. I couldn't reproduce that issue in any way. I think one
of the other recent transfer fixes actually fixed this.
Richard Mudgett [Tue, 15 Feb 2011 16:13:55 +0000 (16:13 +0000)]
No response sent for SIP CC subscribe/resubscribe request.
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
Tilghman Lesher [Mon, 14 Feb 2011 06:50:23 +0000 (06:50 +0000)]
Calling a gosub routine defined in AEL from Dial/Queue ceased to work.
A bug in AEL did not distinguish between the "s" extension generated by
AEL and an "s" extension that was required to exist by the chan_dahdi
(or another channel) that was not supplied with a starting extension.
Therefore, AEL made incorrect assumptions about what commands were
permissable in the context. This was fixed by making AEL generate a
different extension name. However, Dial and Queue make additional
assumptions about the name of the default gosub extension. Therefore,
they needed to be brought into line with a "macro" rendered by AEL (as
a gosub), without breaking traditional dialplans written without the
aid of AEL.
Alexandr Anikin [Thu, 10 Feb 2011 18:50:50 +0000 (18:50 +0000)]
Corrections for properly work with H.323v2 (older) endpoints and other
small fixes.
Interpret remote side H.225 version.
Corrections for H.323v2 endpoints:
don't start TCS and MSD before connect,
don't start TCS and MSD by accepting H.245 connection,
start TCS and MSD by StartH245 facility message.
Other fixes:
fix non zeroended remoteDisplayName issue, small fixes in call clearing
by closing H.245 connection, tcp keepalive introduced on TCP
connections (now is hardcoded, will be configurable in the future),
don't force H.245tunneling if FastStart is active, don't send Alerting
singal more than once per call.
Jason Parker [Tue, 8 Feb 2011 21:24:01 +0000 (21:24 +0000)]
Fix issue with verbose messages not showing on remote console.
This code was reworked recently, and since the logchannel list hadn't been
created yet at this point, and it was a verbose message, it was being dropped
on the floor. Now it'll continue on to where it should be handled.
Don't try to pickup a call in the middle of a masquerade
If A calls B which doesn't answer and C & D both try to do a call pickup, it is
possible for ast_pickup_call to answer the call, then fail to masquerade one of
the calls because the other one is already in the process of masquerading. This
patch checks to see if the channel is in the process of masquerading before
call before selecting it for a pickup.
Don't allow a REFER w/replaces to replace its own dialog
Asterisk currently accepts a REFER with a Refer-To with an embedded Replaces
header that matches the dialog of the REFER. This would be a situation like A
calls B, A calls C, A transfers B to A, which is just silly. This patch makes
the transfer fail instead of making Asterisk freak out and forget to hang other
channels up.
Mark Michelson [Mon, 7 Feb 2011 17:36:56 +0000 (17:36 +0000)]
Rearrange a bit of code in the generic CC recall operation.
By waiting to call the callback macro after the CC_INTERFACES,
extension, priority, and context have been set, this information
can be accessed more easily within the callback macro.
Richard Mudgett [Fri, 4 Feb 2011 18:53:06 +0000 (18:53 +0000)]
Don't send redirecting updates to the caller if the dialplan forked the call.
Each fork in the dial could be redirected and confuse the caller. For
ISDN the DivLeg1 and DivLeg3 messages would get confused because ISDN
redirects calls in sequence not in parallel.
* Also fixed a formatting inconsistency in app_dial.c and make a warning
message more useful about what frame type could not be written.
Jeff Peeler [Thu, 3 Feb 2011 23:49:28 +0000 (23:49 +0000)]
Fix SIP deadlock involving state changes.
Once again a call to pbx_builtin_getvar_helper (and pbx_builtin_setvar_helper)
has caused locking problems. Both of these functions lock the channel when
the channel argument is passed in!
In this case, the suspected problem (the backtrace makes it impossible to tell)
was the private being locked in sip_set_rtp_peer and then:
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper
(Traced to verify that the fix was only required in 1.8 and later.)
When a call involves a local channel (like SIP -> Local -> SIP), the hangup
cause was not being set. This resulted in SIP channels sometimes getting a
503 error instead of a 486 when the far side sent a busy. In Asterisk 1.8+
this also can cause issues with CCSS that involve a local channel. This patch
sets the hangupcause for one side of the local channel to the other in
local_hangup for outbound calls.
........
................
Set exception on channel in parking thread when POLLPRI event detected.
This is done just to make the code be equivalent to the old select code. As
noted in 303106 the same issue was already fixed in this branch, but the
exception was not set on the channel in the case of POLLPRI. The reason that
this did not cause a problem here is because in 122923 the check in __ast_read
to check the exception flag was removed.
* Include the null terminator in the buffer length. When the frame is
queued it is copied. If the null terminator is not part of the frame
buffer length, the receiver could see garbage appended onto it.
* Add channel lock protection with ast_sendtext().
* Fixed AMI SendText action ast_sendtext() return value check.
........
................
Andrew Latham [Tue, 1 Feb 2011 18:02:06 +0000 (18:02 +0000)]
doc/tex dir removed, but corresponding entries still exists
Update README, CHANGES, and Makefile. Direct users to
http://wiki.asterisk.org for documentation or to the
AST.txt and AST.pdf included in the tarball.
(closes issue #18443)
Reported by: bas
Patches:
changes.diff uploaded by lathama (license 1028)
readme.diff uploaded by lathama (license 1028)
Tested by: lathama bas
Prevent a crash when dialing a technology with no destination (ex: Dial(SIP/))
chan_iax2 and other channel drivers already had code to prevent this. The
attempt that app_dial was making to prevent it was not correct, so I fixed that.
Tilghman Lesher [Mon, 31 Jan 2011 06:41:36 +0000 (06:41 +0000)]
Change mutex tracking so that it only consumes memory in the core mutex object when it's actually being used.
This reduces the overall size of a mutex which was 3016 bytes before this back
down to 216 bytes (this is on 64-bit Linux with a glibc-implemented mutex).
The exactness of the numbers here may vary slightly based upon how mutexes are
implemented on a platform, but the long and short of it is that prior to this
commit, chan_iax2 held down 98MB of memory on a 64-bit system for nothing more
than a table of 32767 locks. After this commit, the same table occupies a mere
7MB of memory.
Andrew Latham [Sun, 30 Jan 2011 00:11:56 +0000 (00:11 +0000)]
Add Function and Application Relationships to documentation
Add and extend the see-also sections to the documentation for applications
and functions in an effort to expand the online documentation of the wiki.
Also check for and update any links to moved documentation in the doc folder.
When we pass the S() or L() options to MeetMe, make sure that we honor C as well.
Without this patch, if the user was kicked from the conference via the S() or L()
mechanism, we would just hang up on them even if we also passed C (continue in
dialplan when kicked). With this patch we honor the C flag in those cases.
Make sure that we unref the correct object when ejecting the most recent caller.
Currently, when we kick the last user to enter, we decrement our own reference
count which results in a crash when we kick another user or when we exit the
conference ourselves.
This will fix #18225 in 1.8 and trunk, but that particular bug does not exist in
1.6.2.
Don't leak references if we can't create a pseudo channel for mixing in MeetMe.
If there was a problem allocating a pseudo channel when building our meetme, we
weren't destroying our user container or destroying the mutexes that we created.
........
r304682 | seanbright | 2011-01-28 17:38:05 -0500 (Fri, 28 Jan 2011) | 2 lines
Revert part of the previous commit that snuck in.
........
Fix default prefix=/usr regression on non-Linux systems.
This partially reverts a change made in branches/1.4/ r267759, which will
cause issue #17013 to be reopened. This issue was pointed out by a user
on #asterisk, who helpfully discovered that paths were being set incorrectly.
To truly understand what was wrong, one should run:
svn diff --force -c<this revision> configure
........
................
This patch modifies chan_sip to route responses to the address the request came from. It also modifies chan_sip to respect the maddr parameter in the Via header.
Per the man page, setvbuf() must be called before any other operation on an open file.
We use setvbuf() to associate a buffer with a stream, but we have already written
to the open file. This works (by chance) on Linux, but fails on other platforms,
such as OpenSolaris.
DTMF attended transfers sometimes fail for no apparent reason.
The loop in feature_request_and_dial() can exit when Party C has answered
without processing an AST_CONTROL_ANSWER. Also sometimes an
AST_CONTROL_ANSWER never happens even though Party C has answered.
Don't hangup Party C if he is up or we receive an AST_CONTROL_ANSWER.
........
................
In the case of an attended transfer (A calls B, A atxfers to C) where
A becomes unreachable before replying to Asterisk's BYE, Asterisk can
sometimes retransmit the BYE indefinitely. This is because
__sip_autodestruct tests p->refer && !ast_test_flag(&p->flags[0],
SIP_ALREADYGONE and will then transmit a BYE. When this BYE times out,
it will not ever be marked as ALREADYGONE, so when __sip_autodestruct
is called again, we end up starting the cycle over.
This patch adds a call to sip_alreadygone(pkt->owner) in retrans_pkt
in the case of a BYE that has timed out. This should prevent Asterisk
from trying to transmit new BYE messages in the future.
Sending out unnecessary PROCEEDING messages breaks overlap dialing.
Issue #16789 was a good idea. Unfortunately, it breaks overlap dialing
through Asterisk. There is not enough information available at this point
to know if dialing is complete. The ast_exists_extension(),
ast_matchmore_extension(), and ast_canmatch_extension() calls are not
adequate to detect a dial through extension pattern of "_9!".
Workaround is to use the dialplan Proceeding() application early in
non-dial through extensions.
* Effectively revert issue #16789.
* Allow outgoing overlap dialing to hear dialtone and other early media.
A PROGRESS "inband-information is now available" message is now sent after
the SETUP_ACKNOWLEDGE message for non-digital calls. An
AST_CONTROL_PROGRESS is now generated for incoming SETUP_ACKNOWLEDGE
messages for non-digital calls.
* Handling of the AST_CONTROL_CONGESTION in chan_dahdi/sig_pri was
inconsistent with the cause codes.
* Added better protection from sending out of sequence messages by
combining several flags into a single enum value representing call
progress level.
(closes issue #18509)
Reported by: wimpy
Patches:
issue18509_early_media_v1.8_v3.patch uploaded by rmudgett (license 664)
Expanded upon issue18509_early_media_v1.8_v3.patch to include analog
and SS7 because of backporting requirements.
Tested by: wimpy, rmudgett
........
................
A previous change was made to account for when the number of voicemail messages
exceeds the max limit to be handled properly, but it caused gaps in the messages
to not be properly handled. This has now been resolved.
In later non 1.4 branches, it appears that resequencing wasn't even occurring
due from what appears and accidental code removal.
Russell Bryant [Mon, 24 Jan 2011 20:51:37 +0000 (20:51 +0000)]
Merged revisions 303548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303548 | russell | 2011-01-24 14:49:53 -0600 (Mon, 24 Jan 2011) | 38 lines
Merged revisions 303546 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303546 | russell | 2011-01-24 14:32:21 -0600 (Mon, 24 Jan 2011) | 31 lines
Fix channel redirect out of MeetMe() and other issues with channel softhangup.
Mantis issue #18585 reports that a channel redirect out of MeetMe() stopped
working properly. This issue includes a patch that resolves the issue by
removing a call to ast_check_hangup() from app_meetme.c. I left that in my
patch, as it doesn't need to be there. However, the rest of the patch fixes
this problem with or without the change to app_meetme.
The key difference between what happens before and after this patch is the
effect of the END_OF_Q control frame. After END_OF_Q is hit in ast_read(),
ast_read() will return NULL. With the ast_check_hangup() removed, app_meetme
sees this which causes it to exit as intended. Checking ast_check_hangup()
caused app_meetme to exit earlier in the process, and the target of the
redirect saw the condition where ast_read() returned NULL.
Removing ast_check_hangup() works around the issue in app_meetme, but doesn't
solve the issue if another application did the same thing. There are also
other edge cases where if an application finishes at the same time that a
redirect happens, the target of the redirect will think that the channel hung
up. So, I made some changes in pbx.c to resolve it at a deeper level. There
are already places that unset the SOFTHANGUP_ASYNCGOTO flag in an attempt to
abort the hangup process. My patch extends this to remove the END_OF_Q frame
from the channel's read queue, making the "abort hangup" more complete. This
same technique was used in every place where a softhangup flag was cleared.
Some values configured in chan_dahdi.conf were able to leak in to users.conf
configuration. This was surprising users, and potentially setting non-sane
"defaults".
Some values configured in chan_dahdi.conf were able to leak in to users.conf
configuration. This was surprising users, and potentially setting non-sane
"defaults".
Tony Mountifield pointed out an error I had in my patch. I was a bit too aggressive
on changing 'seconds' to 'milliseconds'. So I decided to do some additioanl testing
and have no changed just the appropriate lines. One line says milliseconds, and the
other says seconds. Probably should change this to be either just seconds or
milliseconds, but I've spent too much time on this already :)
CC_INTERFACES does not get built correctly with local channels.
If local channels are used with CCSS, CC_INTERFACES gets garbage prepended
to it so the CC recall fails. Also CC_INTERFACES gets "&(null)" appended
to it.
* Initialize the buffer to eliminate the prepended garbage.
* Filter out the empty interface strings to eliminate the latter.
* Added a diagnostic message if the CC_INTERFACES is ever empty.
main/features: Use POLLPRI when waiting for events on parked channels.
This change resolves a regression in the 1.6.2 when converting from
select to poll. The DAHDI timers use POLLPRI to indicate that the timer
fired, but features was not waiting for that flag. The result was no
audio for MOH when a call was parked and res_timing_dahdi was in use.
This patch is slightly modified from the one on the mantis issue. It does
not set an exception on the channel if the POLLPRI flag is set.
Option L() is milliseconds, not seconds.
> Change the verbose output of option L() to say milliseconds and not seconds
> as the value is in milliseconds.
>
> (closes issue #18264)
> Reported by: jacco
> Patches:
> app_dial_patch.txt uploaded by lmadsen (license 10)
........
Russell Bryant [Wed, 19 Jan 2011 22:35:15 +0000 (22:35 +0000)]
Resolve a memory leak with the manager interface is disabled.
The intent of this check as it stands in previous versions of Asterisk was to
check if there are any active sessions. If there were no sessions, then the
function would return immediately and not bother with queueing up the manager
event to be processed. Since the conversion of storing sessions in an astobj2
container, this check will always pass. I changed it to go back to checking
what was intended.
The side effect of this was that if the AMI is disabled, the manager event
queue is populated anyway, but the code that runs to clear out the queue
never runs. A producer with no consumer is a bad thing.
DTMF transfer plays the wrong sounds for wrong number or other call failure.
* Set the default for features.conf.sample xferfailsound option to "beeperr"
as documented instead of "pbx-invalid" and corrected the use of it in DTMF
blind transfer (#1).
* Improved DTMF blind transfer handling of wrong numbers.
Most of the concerns in this issue were taken care of by the patch for
issue 17999: Issues with DTMF triggered attended transfers.
When we ast_safe_fork() with a non-zero argument, we're expected to reap our
own zombies. On a zero argument, however, the zombies are only reaped when
there aren't any non-zero forked children alive. At other times, we
accumulate zombies. This code is forward ported from res_agi in 1.4, so that
forked children are always reaped, thus preventing an accumulation of zombie
processes.
projects / thirdparty / asterisk.git / log
