Junio C Hamano [Thu, 30 Jul 2020 20:20:31 +0000 (13:20 -0700)]
Merge branch 'ds/commit-graph-bloom-updates' into master
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
Junio C Hamano [Thu, 30 Jul 2020 20:20:30 +0000 (13:20 -0700)]
Merge branch 'sg/commit-graph-cleanups' into master
The changed-path Bloom filter is improved using ideas from an
independent implementation.
* sg/commit-graph-cleanups:
commit-graph: simplify write_commit_graph_file() #2
commit-graph: simplify write_commit_graph_file() #1
commit-graph: simplify parse_commit_graph() #2
commit-graph: simplify parse_commit_graph() #1
commit-graph: clean up #includes
diff.h: drop diff_tree_oid() & friends' return value
commit-slab: add a function to deep free entries on the slab
commit-graph-format.txt: all multi-byte numbers are in network byte order
commit-graph: fix parsing the Chunk Lookup table
tree-walk.c: don't match submodule entries for 'submod/anything'
githooks.txt: use correct "reference-transaction" hook name
The "reference transaction" hook was introduced in commit 6754159767
(refs: implement reference transaction hook, 2020-06-19). The name of
the hook is declared as "reference-transaction" in "refs.c" and
testcases, but the name declared in "githooks.txt" is different.
Signed-off-by: Bojun Chen <bojun.cbj@alibaba-inc.com> Reviewed-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sat, 18 Jul 2020 09:48:40 +0000 (11:48 +0200)]
t3200: don't grep for `strerror()` string
In 6b7093064a ("t3200: test for specific errors", 2020-06-15), we
learned to grep stderr to ensure that the failing `git branch`
invocations fail for the right reason. In two of these tests, we grep
for "File exists", expecting the string to show up there since config.c
calls `error_errno()`, which ends up including `strerror(errno)` in the
error message.
But as we saw in 4605a73073 ("t1091: don't grep for `strerror()`
string", 2020-03-08), there exists at least one implementation where
`strerror()` yields a slightly different string than the one we're
grepping for. In particular, these tests fail on the NonStop platform.
Similar to 4605a73073, grep for the beginning of the string instead to
avoid relying on `strerror()` behavior.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sat, 18 Jul 2020 20:17:23 +0000 (22:17 +0200)]
gitworkflows.txt: fix broken subsection underline
AsciiDoctor renders the "~~~~~~~~~" literally. That's not our intention:
it is supposed to indicate a level 2 subsection. In 828197de8f ("docs:
adjust for the recent rename of `pu` to `seen`", 2020-06-25), the length
of this section header grew by two characters but we didn't adjust the
number of ~ characters accordingly. AsciiDoc handles this discrepancy ok
and still picks this up as a subsection title, but Asciidoctor is not as
forgiving.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 17 Jul 2020 20:33:04 +0000 (13:33 -0700)]
RelNotes: update the v0 with extension situation
With the two-patch series for regression fix, to the users from 2.27
days, there is no visible behaviour change---we do not warn and fail
use of v0 repositories with newer extensions yet, so there is nothing
to note in the backward compatibility section.
Junio C Hamano [Fri, 17 Jul 2020 00:58:42 +0000 (17:58 -0700)]
Merge branch 'jn/v0-with-extensions-fix' into master
In 2.28-rc0, we corrected a bug that some repository extensions are
honored by mistake even in a version 0 repositories (these
configuration variables in extensions.* namespace were supposed to
have special meaning in repositories whose version numbers are 1 or
higher), but this was a bit too big a change.
* jn/v0-with-extensions-fix:
repository: allow repository format upgrade with extensions
Revert "check_repository_format_gently(): refuse extensions for old repositories"
Jonathan Nieder [Thu, 16 Jul 2020 06:28:18 +0000 (23:28 -0700)]
repository: allow repository format upgrade with extensions
Now that we officially permit repository extensions in repository
format v0, permit upgrading a repository with extensions from v0 to v1
as well.
For example, this means a repository where the user has set
"extensions.preciousObjects" can use "git fetch --filter=blob:none
origin" to upgrade the repository to use v1 and the partial clone
extension.
To avoid mistakes, continue to forbid repository format upgrades in v0
repositories with an unrecognized extension. This way, a v0 user
using a misspelled extension field gets a chance to correct the
mistake before updating to the less forgiving v1 format.
While we're here, make the error message for failure to upgrade the
repository format a bit shorter, and present it as an error, not a
warning.
Reported-by: Huan Huan Chen <huanhuanchen@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.repositoryFormatVersion field was introduced in ab9cb76f661
(Repository format version check., 2005-11-25), providing a welcome
bit of forward compatibility, thanks to some welcome analysis by
Martin Atukunda. The semantics are simple: a repository with
core.repositoryFormatVersion set to 0 should be comprehensible by all
Git implementations in active use; and Git implementations should
error out early instead of trying to act on Git repositories with
higher core.repositoryFormatVersion values representing new formats
that they do not understand.
A new repository format did not need to be defined until 00a09d57eb8
(introduce "extensions" form of core.repositoryformatversion,
2015-06-23). This provided a finer-grained extension mechanism for
Git repositories. In a repository with core.repositoryFormatVersion
set to 1, Git implementations can act on "extensions.*" settings that
modify how a repository is interpreted. In repository format version
1, unrecognized extensions settings cause Git to error out.
What happens if a user sets an extension setting but forgets to
increase the repository format version to 1? The extension settings
were still recognized in that case; worse, unrecognized extensions
settings do *not* cause Git to error out. So combining repository
format version 0 with extensions settings produces in some sense the
worst of both worlds.
To improve that situation, since 14c7fa269e4
(check_repository_format_gently(): refuse extensions for old
repositories, 2020-06-05) Git instead ignores extensions in v0 mode.
This way, v0 repositories get the historical (pre-2015) behavior and
maintain compatibility with Git implementations that do not know about
the v1 format. Unfortunately, users had been using this sort of
configuration and this behavior change came to many as a surprise:
- users of "git config --worktree" that had followed its advice
to enable extensions.worktreeConfig (without also increasing the
repository format version) would find their worktree configuration
no longer taking effect
- tools such as copybara[*] that had set extensions.partialClone in
existing repositories (without also increasing the repository format
version) would find that setting no longer taking effect
The behavior introduced in 14c7fa269e4 might be a good behavior if we
were traveling back in time to 2015, but we're far too late. For some
reason I thought that it was what had been originally implemented and
that it had regressed. Apologies for not doing my research when 14c7fa269e4 was under development.
Let's return to the behavior we've had since 2015: always act on
extensions.* settings, regardless of repository format version. While
we're here, include some tests to describe the effect on the "upgrade
repository version" code path.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 15 Jul 2020 23:29:43 +0000 (16:29 -0700)]
Merge branch 'ta/wait-on-aliased-commands-upon-signal' into master
When an aliased command, whose output is piped to a pager by git,
gets killed by a signal, the pager got into a funny state, which
has been corrected (again).
* ta/wait-on-aliased-commands-upon-signal:
Wait for child on signal death for aliases to externals
Wait for child on signal death for aliases to builtins
SZEDER Gábor [Fri, 10 Jul 2020 19:02:38 +0000 (21:02 +0200)]
commit-graph: fix "Collecting commits from input" progress line
To display a progress line while reading commits from standard input
and looking them up, 5b6653e523 (builtin/commit-graph.c: dereference
tags in builtin, 2020-05-13) should have added a pair of
start_delayed_progress() and stop_progress() calls around the loop
reading stdin. Alas, the stop_progress() call ended up at the wrong
place, after write_commit_graph(), which does all the commit-graph
computation and writing, and has several progress lines of its own.
Consequently, that new
Collecting commits from input: 1234
progress line is overwritten by the first progress line shown by
write_commit_graph(), and its final "done" line is shown last, after
everything is finished:
$ { sleep 3 ; git rev-list -3 HEAD ; sleep 1 ; } | ~/src/git/git commit-graph write --stdin-commits
Expanding reachable commits in commit graph: 873402, done.
Writing out commit graph in 4 passes: 100% (3493608/3493608), done.
Collecting commits from input: 3, done.
Furthermore, that stop_progress() call was added after the 'cleanup'
label, where that loop reading stdin jumps in case of an error. In
case of invalid input this then results in the "done" line shown after
the error message:
Move that stop_progress() call to the right place.
While at it, drop the unnecessary 'if (progress)' condition protecting
the stop_progress() call, because that function is prepared to handle
a NULL progress struct.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It then goes on to say that "all of the <commit> in the above
description, except in the last two forms that use '..' notations, can
be any <tree>". The "last two" actually refers to 6 and 8. This got out
of sync in commit b7e10b2ca2 ("Documentation: usage for diff combined
commits", 2020-06-12) which added item 7 to the mix.
As a further complication, after b7e10b2ca2 we also have some potential
confusion around "the '..' notation". The "..[.]" in items 6 and 8 are
part of the rev notation, whereas the "..." in item 7 is manpage
language for "one or more".
Move item 6 down, i.e., to between 7 and 8, to restore the ordering.
Because 6 refers to 5 ("synonymous to the previous form") we need to
tweak the language a bit.
An added bonus of this commit is that we're trying to steer users away
from `git diff <commit>..<commit>` and moving it further down probably
doesn't hurt.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
where it says that "[t]his form is to view the results of a merge
commit" and details how "the first listed commit must be the merge
itself". But one possible instantiation of this form is `git diff
<commit> <commit>` for which the added text doesn't really apply.
Remove the brackets so that we lose this overlap between the two
descriptions. We can still use the more compact representation in the
synopsis.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Jul 2020 21:00:44 +0000 (14:00 -0700)]
Merge branch 'jn/eject-fetch-write-commit-graph-out-of-experimental' into master
"fetch.writeCommitGraph" was enabled when "feature.experimental" is
asked for, but it was found to be a bit too risky even for bold
folks in its current shape. The configuration has been ejected, at
least for now, from the "experimental" feature set.
* jn/eject-fetch-write-commit-graph-out-of-experimental:
experimental: default to fetch.writeCommitGraph=false
Junio C Hamano [Thu, 9 Jul 2020 21:00:44 +0000 (14:00 -0700)]
Merge branch 'tb/fix-persistent-shallow' into master
When "fetch.writeCommitGraph" configuration is set in a shallow
repository and a fetch moves the shallow boundary, we wrote out
broken commit-graph files that do not match the reality, which has
been corrected.
* tb/fix-persistent-shallow:
commit.c: don't persist substituted parents when unshallowing
Junio C Hamano [Thu, 9 Jul 2020 21:00:42 +0000 (14:00 -0700)]
Merge branch 'rs/line-log-until' into master
"git log -Lx,y:path --before=date" lost track of where the range
should be because it didn't take the changes made by the youngest
commits that are omitted from the output into account.
* rs/line-log-until:
revision: disable min_age optimization with line-log
Junio C Hamano [Thu, 9 Jul 2020 21:00:42 +0000 (14:00 -0700)]
Merge branch 'ra/send-email-in-reply-to-from-command-line-wins' into master
"git send-email --in-reply-to=<msg>" did not use the In-Reply-To:
header with the value given from the command line, and let it be
overridden by the value on In-Reply-To: header in the messages
being sent out (if exists).
Junio C Hamano [Thu, 9 Jul 2020 21:00:41 +0000 (14:00 -0700)]
Merge branch 'vs/completion-with-set-u' into master
The command line completion support (in contrib/) used to be
prepared to work with "set -u" but recent changes got a bit more
sloppy. This has been corrected.
Martin Ågren [Thu, 9 Jul 2020 18:24:38 +0000 (20:24 +0200)]
git-rebase.txt: fix description list separator
We don't give a "::" for the list separator, but just a single ":". This
ends up rendering literally, "--apply: Use applying strategies ...". As
a follow-on error, the list continuation, "+", also ends up rendering
literally (because we don't have a list).
This was introduced in 52eb738d6b ("rebase: add an --am option",
2020-02-15) and survived the rename in 10cdb9f38a ("rebase: rename the
two primary rebase backends", 2020-02-15).
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Thu, 9 Jul 2020 17:00:03 +0000 (19:00 +0200)]
commit-graph: fix "Writing out commit graph" progress counter
76ffbca71a (commit-graph: write Bloom filters to commit graph file,
2020-04-06) added two delayed progress lines to writing the Bloom
filter index and data chunk. This is wrong, because a single common
progress is used while writing all chunks, which is not updated while
writing these two new chunks, resulting in incomplete-looking "done"
lines:
Expanding reachable commits in commit graph: 888679, done.
Computing commit changed paths Bloom filters: 100% (888678/888678), done.
Writing out commit graph in 6 passes: 66% (3554712/5332068), done.
Use the common 'struct progress' instance while writing the Bloom
filter chunks as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Thu, 9 Jul 2020 16:54:32 +0000 (18:54 +0200)]
commit-graph: fix progress of reachable commits
To display a progress line while iterating over all refs, d335ce8f24 (commit-graph.c: show progress of finding reachable
commits, 2020-05-13) should have added a pair of
start_delayed_progress() and stop_progress() calls around a
for_each_ref() invocation. Alas, the stop_progress() call ended up at
the wrong place, after write_commit_graph(), which does all the
commit-graph computation and writing, and has several progress lines
of its own. Consequently, that new
Collecting referenced commits: 123
progress line is overwritten by the first progress line shown by
write_commit_graph(), and its final "done" line is shown last, after
everything is finished:
Move that stop_progress() call to the right place.
While at it, drop the unnecessary 'if (data.progress)' condition
protecting the stop_progress() call, because that function is prepared
to handle a NULL progress struct.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 11179eb311 ("entry.c: check if file exists after checkout",
2017-10-05) we started checking the result of the lstat() call done
after writing a file, to avoid writing garbage to the corresponding
cache entry. However, the code skips calling lstat() if it's possible
to use fstat() when it still has the file descriptor open. And when
calling fstat() we don't do the same error checking. To fix that, let
the callers of fstat_output() know when fstat() fails. In this case,
write_entry() will try to use lstat() and properly report an error if
that fails as well.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 7 Jul 2020 06:20:39 +0000 (23:20 -0700)]
experimental: default to fetch.writeCommitGraph=false
The fetch.writeCommitGraph feature makes fetches write out a commit
graph file for the newly downloaded pack on fetch. This improves the
performance of various commands that would perform a revision walk and
eventually ought to be the default for everyone. To prepare for that
future, it's enabled by default for users that set
feature.experimental=true to experience such future defaults.
Alas, for --unshallow fetches from a shallow clone it runs into a
snag: by the time Git has fetched the new objects and is writing a
commit graph, it has performed a revision walk and r->parsed_objects
contains information about the shallow boundary from *before* the
fetch. The commit graph writing code is careful to avoid writing a
commit graph file in shallow repositories, but the new state is not
shallow, and the result is that from that point on, commands like "git
log" make use of a newly written commit graph file representing a
fictional history with the old shallow boundary.
We could fix this by making the commit graph writing code more careful
to avoid writing a commit graph that could have used any grafts or
shallow state, but it is possible that there are other pieces of
mutated state that fetch's commit graph writing code may be relying
on. So disable it in the feature.experimental configuration.
Google developers have been running in this configuration (by setting
fetch.writeCommitGraph=false in the system config) to work around this
bug since it was discovered in April. Once the fix lands, we'll
enable fetch.writeCommitGraph=true again to give it some early testing
before rolling out to a wider audience.
In other words:
- this patch only affects behavior with feature.experimental=true
- it makes feature.experimental match the configuration Google has
been using for the last few months, meaning it would leave users in
a better tested state than without it
- this should improve testing for other features guarded by
feature.experimental, by making feature.experimental safer to use
Reported-by: Jay Conrod <jayconrod@google.com> Helped-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 8 Jul 2020 21:10:53 +0000 (17:10 -0400)]
commit.c: don't persist substituted parents when unshallowing
Since 37b9dcabfc (shallow.c: use '{commit,rollback}_shallow_file',
2020-04-22), Git knows how to reset stat-validity checks for the
$GIT_DIR/shallow file, allowing it to change between a shallow and
non-shallow state in the same process (e.g., in the case of 'git fetch
--unshallow').
However, when $GIT_DIR/shallow changes, Git does not alter or remove any
grafts (nor substituted parents) in memory.
This comes up in a "git fetch --unshallow" with fetch.writeCommitGraph
set to true. Ordinarily in a shallow repository (and before 37b9dcabfc,
even in this case), commit_graph_compatible() would return false,
indicating that the repository should not be used to write a
commit-graphs (since commit-graph files cannot represent a shallow
history). But since 37b9dcabfc, in an --unshallow operation that check
succeeds.
Thus even though the repository isn't shallow any longer (that is, we
have all of the objects), the in-core representation of those objects
still has munged parents at the shallow boundaries. When the
commit-graph write proceeds, we use the incorrect parentage, producing
wrong results.
There are two ways for a user to work around this: either (1) set
'fetch.writeCommitGraph' to 'false', or (2) drop the commit-graph after
unshallowing.
One way to fix this would be to reset the parsed object pool entirely
(flushing the cache and thus preventing subsequent reads from modifying
their parents) after unshallowing. That would produce a problem when
callers have a now-stale reference to the old pool, and so this patch
implements a different approach. Instead, attach a new bit to the pool,
'substituted_parent', which indicates if the repository *ever* stored a
commit which had its parents modified (i.e., the shallow boundary
prior to unshallowing).
This bit needs to be sticky because all reads subsequent to modifying a
commit's parents are unreliable when unshallowing. Modify the check in
'commit_graph_compatible' to take this bit into account, and correctly
avoid generating commit-graphs in this case, thus solving the bug.
Helped-by: Derrick Stolee <dstolee@microsoft.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Reported-by: Jay Conrod <jayconrod@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 8 Jul 2020 04:38:19 +0000 (00:38 -0400)]
diff: check for merge bases before assigning sym->base
In symdiff_prepare(), we iterate over the set of parsed objects to pick
out any symmetric differences, including the left, right, and base
elements. We assign the results into pointers in a "struct symdiff", and
then complain if we didn't find a base, like so:
sym->left = rev->pending.objects[lpos].name;
sym->right = rev->pending.objects[rpos].name;
sym->base = rev->pending.objects[basepos].name;
if (basecount == 0)
die(_("%s...%s: no merge base"), sym->left, sym->right);
But the least lines are backwards. If basecount is 0, then basepos will
be -1, and we will access memory outside of the pending array. This
isn't usually that big a deal, since we don't do anything besides a
single pointer-sized read before exiting anyway, but it does violate the
C standard, and of course memory-checking tools like ASan complain.
Let's put the basecount check first. Note that we haveto split it from
the other assignments, since the die() relies on sym->left and
sym->right having been assigned (this isn't strictly necessary, but is
easier to read than dereferencing the pending array again).
Reported-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wait for child on signal death for aliases to externals
When we are running an alias to an external command, we want to wait for
that process to exit even after receiving ^C which normally kills the
git process. This is useful when the process is ignoring SIGINT (which
e.g. pagers often do), and then we don't want it to be killed.
Having an alias which invokes a pager is probably not common, but it can
be useful e.g. if you have an alias to a git command which uses a
subshell as one of the arguments (in which case you have to use an
external command, not an alias to a builtin).
This patch is similar to the previous commit, but the previous commit
fixed this only for aliases to builtins, while this commit does the same
for aliases to external commands. In addition to waiting after clean
like the previous commit, this also enables cleaning the child (that was
already enabled for aliases to builtins before the previous commit),
because wait_after_clean relies on it. Lastly, while the previous commit
fixed a regression, I don't think this has ever worked properly.
Signed-off-by: Trygve Aaberge <trygveaa@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wait for child on signal death for aliases to builtins
When you hit ^C all the processes in the tree receives it. When a git
command uses a pager, git ignores this and waits until the pager quits.
However, when using an alias there is an additional process in the tree
which didn't ignore the signal. That caused it to exit which in turn
caused the pager to exit. This fixes that for aliases to builtins.
This was originally fixed in 46df6906 (execv_dashed_external: wait
for child on signal death, 2017-01-06), but was broken by ee4512ed
(trace2: create new combined trace facility, 2019-02-22) and then b9140840 (git: avoid calling aliased builtins via their dashed form,
2019-07-29).
Signed-off-by: Trygve Aaberge <trygveaa@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 7 Jul 2020 05:09:18 +0000 (22:09 -0700)]
Merge branch 'dl/test-must-fail-fixes-5'
The effort to avoid using test_must_fail on non-git command continues.
* dl/test-must-fail-fixes-5:
lib-submodule-update: pass 'test_must_fail' as an argument
lib-submodule-update: prepend "git" to $command
lib-submodule-update: consolidate --recurse-submodules
lib-submodule-update: add space after function name
Junio C Hamano [Tue, 7 Jul 2020 05:09:17 +0000 (22:09 -0700)]
Merge branch 'jk/fast-export-anonym-alt'
"git fast-export --anonymize" learned to take customized mapping to
allow its users to tweak its output more usable for debugging.
* jk/fast-export-anonym-alt:
fast-export: use local array to store anonymized oid
fast-export: anonymize "master" refname
fast-export: allow seeding the anonymized mapping
fast-export: add a "data" callback parameter to anonymize_str()
fast-export: move global "idents" anonymize hashmap into function
fast-export: use a flex array to store anonymized entries
fast-export: stop storing lengths in anonymized hashmaps
fast-export: tighten anonymize_mem() interface to handle only strings
fast-export: store anonymized oids as hex strings
fast-export: use xmemdupz() for anonymizing oids
t9351: derive anonymized tree checks from original repo
"git difftool" has trouble dealing with paths added to the index
with the intent-to-add bit.
* js/diff-files-i-t-a-fix-for-difftool:
difftool -d: ensure that intent-to-add files are handled correctly
diff-files --raw: show correct post-image of intent-to-add files
Junio C Hamano [Tue, 7 Jul 2020 05:09:17 +0000 (22:09 -0700)]
Merge branch 'js/default-branch-name'
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
Junio C Hamano [Tue, 7 Jul 2020 05:09:17 +0000 (22:09 -0700)]
Merge branch 'bc/http-push-flagsfix'
The code to push changes over "dumb" HTTP had a bad interaction
with the commit reachability code due to incorrect allocation of
object flag bits, which has been corrected.
* bc/http-push-flagsfix:
http-push: ensure unforced pushes fail when data would be lost
Junio C Hamano [Tue, 7 Jul 2020 05:09:16 +0000 (22:09 -0700)]
Merge branch 'js/pu-to-seen'
The documentation and some tests have been adjusted for the recent
renaming of "pu" branch to "seen".
* js/pu-to-seen:
tests: reference `seen` wherever `pu` was referenced
docs: adjust the technical overview for the rename `pu` -> `seen`
docs: adjust for the recent rename of `pu` to `seen`
Junio C Hamano [Tue, 7 Jul 2020 05:09:14 +0000 (22:09 -0700)]
Merge branch 'bc/sha-256-cvs-svn-updates'
CVS/SVN interface have been prepared for SHA-256 transition
* bc/sha-256-cvs-svn-updates:
git-cvsexportcommit: port to SHA-256
git-cvsimport: port to SHA-256
git-cvsserver: port to SHA-256
git-svn: set the OID length based on hash algorithm
perl: make SVN code hash independent
perl: make Git::IndexInfo work with SHA-256
perl: create and switch variables for hash constants
t/lib-git-svn: make hash size independent
t9101: make hash independent
t9104: make hash size independent
t9100: make test work with SHA-256
t9108: make test hash independent
t9168: make test hash independent
t9109: make test hash independent
Junio C Hamano [Tue, 7 Jul 2020 05:09:13 +0000 (22:09 -0700)]
Merge branch 'ak/commit-graph-to-slab'
A few fields in "struct commit" that do not have to always be
present have been moved to commit slabs.
* ak/commit-graph-to-slab:
commit-graph: minimize commit_graph_data_slab access
commit: move members graph_pos, generation to a slab
commit-graph: introduce commit_graph_data_slab
object: drop parsed_object_pool->commit_count
Junio C Hamano [Tue, 7 Jul 2020 05:09:13 +0000 (22:09 -0700)]
Merge branch 'en/sparse-status'
"git status" learned to report the status of sparse checkout.
* en/sparse-status:
git-prompt: include sparsity state as well
git-prompt: document how in-progress operations affect the prompt
wt-status: show sparse checkout status as well
Junio C Hamano [Tue, 7 Jul 2020 05:09:13 +0000 (22:09 -0700)]
Merge branch 'bc/sha-256-part-2'
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
René Scharfe [Sat, 4 Jul 2020 12:56:32 +0000 (14:56 +0200)]
revision: disable min_age optimization with line-log
If one of the options --before, --min-age or --until is given,
limit_list() filters out younger commits early on. Line-log needs all
those commits to trace the movement of line ranges, though. Skip this
optimization if both are used together.
Reported-by: Мария Долгополова <dolgopolovamariia@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool -d: ensure that intent-to-add files are handled correctly
In https://github.com/git-for-windows/git/issues/2677, a `git difftool
-d` problem was reported. The underlying cause was a bug in `git
diff-files --raw` that we just fixed: it reported intent-to-add files
with the empty _tree_ as the post-image OID, when we need to show
an all-zero (or, "null") OID instead, to indicate to the caller that
they have to look at the worktree file.
The symptom of that problem shown by `git difftool` was this:
error: unable to read sha1 file of <path> (<empty-tree-OID>)
error: could not write '<filename>'
Make sure that the reported `difftool` problem stays fixed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-files --raw: show correct post-image of intent-to-add files
The documented behavior of `git diff-files --raw` is to display
[...] 0{40} if creation, unmerged or "look at work tree".
on the right hand (i.e. postimage) side. This happens for files that
have unstaged modifications, and for files that are unmodified but
stat-dirty.
For intent-to-add files, we used to show the empty blob's hash instead.
In c26022ea8f5 (diff: convert diff_addremove to struct object_id,
2017-05-30), we made that worse by inadvertently changing that to the
hash of the empty tree.
Let's make the behavior consistent with files that have unstaged
modifications (which applies to intent-to-add files, too) by showing
all-zero values also for intent-to-add files.
Accordingly, this patch adjusts the expectations set by the regression
test introduced in feea6946a5b (diff-files: treat "i-t-a" files as
"not-in-index", 2020-06-20).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git send-email --in-reply-to= fails to override In-Reply-To email headers,
if they're present in the output of format-patch, even when explicitly
told to do so by the option --no-thread, which breaks the contract of the
command line switch option, per its man page.
"
--in-reply-to=<identifier>
Make the first mail (or all the mails with --no-thread) appear as
a reply to the given Message-Id, which avoids breaking threads to
provide a new patch series.
"
This patch fixes the aformentioned issue, by bringing --in-reply-to's old
overriding behavior back.
The test was donated by Carlo Marcelo Arenas Belón.
Signed-off-by: Rafael Aquini <aquini@redhat.com> Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cat-file: add missing [=<format>] to usage/synopsis
When displaying cat-file usage, the fact that a <format> can
be specified is only visible when lookling at the --batch and
--batch-check options which are shown like this:
--batch[=<format>] show info and content of objects fed from the standard input
--batch-check[=<format>]
show info about objects fed from the standard input
It seems more coherent and improves discovery to also show it
on the usage line.
In the documentation the DESCRIPTION tells us that "The output
format can be overridden using the optional <format> argument",
but we can't see the <format> argument in the SYNOPSIS above
the description which is confusing.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ville Skyttä [Mon, 29 Jun 2020 18:59:45 +0000 (21:59 +0300)]
completion: nounset mode fixes
Accessing unset variables results an errors when the shell is in
nounset/-u mode. This fixes the cases I've come across while using git
completion in a shell running in that mode for a while. It's hard to
tell if this is the complete set, but at least it improves things.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 1 Jul 2020 13:27:30 +0000 (13:27 +0000)]
commit-graph: check all leading directories in changed path Bloom filters
The file 'dir/subdir/file' can only be modified if its leading
directories 'dir' and 'dir/subdir' are modified as well.
So when checking modified path Bloom filters looking for commits
modifying a path with multiple path components, then check not only
the full path in the Bloom filters, but all its leading directories as
well. Take care to check these paths in "deepest first" order,
because it's the full path that is least likely to be modified, and
the Bloom filter queries can short circuit sooner.
This can significantly reduce the average false positive rate, by
about an order of magnitude or three(!), and can further speed up
pathspec-limited revision walks. The table below compares the average
false positive rate and runtime of
git rev-list HEAD -- "$path"
before and after this change for 5000+ randomly* selected paths from
each repository:
Average false Average Average
positive rate runtime runtime
before after before after difference
------------------------------------------------------------------
git 3.220% 0.7853% 0.0558s 0.0387s -30.6%
linux 2.453% 0.0296% 0.1046s 0.0766s -26.8%
tensorflow 2.536% 0.6977% 0.0594s 0.0420s -29.2%
*Path selection was done with the following pipeline:
git ls-tree -r --name-only HEAD | sort -R | head -n 5000
The improvements in runtime are much smaller than the improvements in
average false positive rate, as we are clearly reaching diminishing
returns here. However, all these timings depend on that accessing
tree objects is reasonably fast (warm caches). If we had a partial
clone and the tree objects had to be fetched from a promisor remote,
e.g.:
then checking all leading path component can reduce the runtime from
over an hour to a few seconds (and this is with the clone and the
promisor on the same machine).
This adjusts the tracing values in t4216-log-bloom.sh, which provides a
concrete way to notice the improvement.
Helped-by: Taylor Blau <me@ttaylorr.com> Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 1 Jul 2020 13:27:29 +0000 (13:27 +0000)]
revision: empty pathspecs should not use Bloom filters
The prepare_to_use_bloom_filter() method was not intended to be called
on an empty pathspec. However, 'git log -- .' and 'git log' are subtly
different: the latter reports all commits while the former will simplify
commits that do not change the root tree.
This means that the path used to construct the bloom_key might be empty,
and that value is not added to the Bloom filter during construction.
That means that the results are likely incorrect!
To resolve the issue, be careful about the length of the path and stop
filling Bloom filters. To be completely sure we do not use them, drop
the pointer to the bloom_filter_settings from the commit-graph. That
allows our test to look at the trace2 logs to verify no Bloom filter
statistics are reported.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 1 Jul 2020 13:27:27 +0000 (13:27 +0000)]
commit-graph: check chunk sizes after writing
In my experience while experimenting with new commit-graph chunks,
early versions of the corresponding new write_commit_graph_my_chunk()
functions are, sadly but not surprisingly, often buggy, and write more
or less data than they are supposed to, especially if the chunk size
is not directly proportional to the number of commits. This then
causes all kinds of issues when reading such a bogus commit-graph
file, raising the question of whether the writing or the reading part
happens to be buggy this time.
Let's catch such issues early, already when writing the commit-graph
file, and check that each write_graph_chunk_*() function wrote the
amount of data that it was expected to, and what has been encoded in
the Chunk Lookup table. Now that all commit-graph chunks are written
in a loop we can do this check in a single place for all chunks, and
any chunks added in the future will get checked as well.
Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 1 Jul 2020 13:27:26 +0000 (13:27 +0000)]
commit-graph: simplify chunk writes into loop
In write_commit_graph_file() we now have one block of code filling the
array of 'struct chunk_info' with the IDs and sizes of chunks to be
written, and an other block of code calling the functions responsible
for writing individual chunks. In case of optional chunks like Extra
Edge List an Base Graphs List there is also a condition checking
whether that chunk is necessary/desired, and that same condition is
repeated in both blocks of code. Other, newer chunks have similar
optional conditions.
Eliminate these repeated conditions by storing the function pointers
responsible for writing individual chunks in the 'struct chunk_info'
array as well, and calling them in a loop to write the commit-graph
file. This will open up the possibility for a bit of foolproofing in
the following patch.
Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 1 Jul 2020 13:27:25 +0000 (13:27 +0000)]
commit-graph: unify the signatures of all write_graph_chunk_*() functions
Update the write_graph_chunk_*() helper functions to have the same
signature:
- Return an int error code from all these functions.
write_graph_chunk_base() already has an int error code, now the
others will have one, too, but since they don't indicate any
error, they will always return 0.
- Drop the hash size parameter of write_graph_chunk_oids() and
write_graph_chunk_data(); its value can be read directly from
'the_hash_algo' inside these functions as well.
This opens up the possibility for further cleanups and foolproofing in
the following two patches.
Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changed-path Bloom filters were released in v2.27.0, but have a
significant drawback. A user can opt-in to writing the changed-path
filters using the "--changed-paths" option to "git commit-graph write"
but the next write will drop the filters unless that option is
specified.
This becomes even more important when considering the interaction with
gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of
features.experimental). These config options trigger commit-graph writes
that the user did not signal, and hence there is no --changed-paths
option available.
Allow a user that opts-in to the changed-path filters to persist the
property of "my commit-graph has changed-path filters" automatically. A
user can drop filters using the --no-changed-paths option.
In the process, we need to be extremely careful to match the Bloom
filter settings as specified by the commit-graph. This will allow future
versions of Git to customize these settings, and the version with this
change will persist those settings as commit-graphs are rewritten on
top.
Use the trace2 API to signal the settings used during the write, and
check that output in a test after manually adjusting the correct bytes
in the commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_bloom_filter() method is a bit complicated in some parts where
it does not need to be. In particular, it needs to return a NULL filter
only when compute_if_not_present is zero AND the filter data cannot be
loaded from a commit-graph file. This currently happens by accident
because the commit-graph does not load changed-path Bloom filters from
an existing commit-graph when writing a new one. This will change in a
later patch.
Also clean up some style issues while we are here.
One side-effect of returning a NULL filter is that the filters that are
reported as "too large" will now be reported as NULL insead of length
zero. This case was not properly covered before, so add a test. Further,
remote the counting of the zero-length filters from revision.c and the
trace2 logs.
Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
