proc_pid_wchan() used to report kernel addresses to user space but that is
no longer the case today. Bring the comment above proc_pid_wchan() in
sync with the implementation.
Link: https://lkml.kernel.org/r/20250319210222.1518771-1-bvanassche@acm.org Fixes: b2f73922d119 ("fs/proc, core/debug: Don't expose absolute kernel addresses via wchan") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Kees Cook <kees@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
When processing tracepoints the perf python binding was parsing the
event before calling perf_mmap__consume(&md->core) in
pyrf_evlist__read_on_cpu().
But part of this event parsing was to set the perf_sample->raw_data
pointer to the payload of the event, which then could be overwritten by
other event before tracepoint fields were asked for via event.prev_comm
in a python program, for instance.
This also happened with other fields, but strings were were problems
were surfacing, as there is UTF-8 validation for the potentially garbled
data.
This ended up showing up as (with some added debugging messages):
( field 'prev_comm' ret=0x7f7c31f65110, raw_size=68 ) ( field 'prev_pid' ret=0x7f7c23b1bed0, raw_size=68 ) ( field 'prev_prio' ret=0x7f7c239c0030, raw_size=68 ) ( field 'prev_state' ret=0x7f7c239c0250, raw_size=68 ) time 14771421785867 prev_comm= prev_pid=1919907691 prev_prio=796026219 prev_state=0x303a32313175 ==>
( XXX '��' len=16, raw_size=68) ( field 'next_comm' ret=(nil), raw_size=68 ) Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 51, in <module>
main()
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 46, in main
event.next_comm,
^^^^^^^^^^^^^^^
AttributeError: 'perf.sample_event' object has no attribute 'next_comm'
When event.next_comm was asked for, the PyUnicode_FromString() python
API would fail and that tracepoint field wouldn't be available, stopping
the tools/perf/python/tracepoint.py test tool.
But, since we already do a copy of the whole event in pyrf_event__new,
just use it and while at it remove what was done in in e8968e654191390a
("perf python: Fix pyrf_evlist__read_on_cpu event consuming") because we
don't really need to wait for parsing the sample before declaring the
event as consumed.
This copy is questionable as is now, as it limits the maximum event +
sample_type and tracepoint payload to sizeof(union perf_event), this all
has been "working" because 'struct perf_event_mmap2', the largest entry
in 'union perf_event' is:
To avoid a leak if we have the python object but then something happens
and we need to return the operation, decrement the offset of the newly
created object.
Fixes: 377f698db12150a1 ("perf python: Add struct evsel into struct pyrf_event") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250312203141.285263-5-acme@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The amount of looping through the list of delegations is occasionally
leading to soft lockups. Avoid at least some loops by not requiring the
NFSv4 state manager to scan for delegations that are marked for
return-on-close. Instead, either mark them for immediate return (if
possible) or else leave it up to nfs4_inode_return_delegation_on_close()
to return them once the file is closed by the application.
Fixes: b757144fd77c ("NFSv4: Be less aggressive about returning delegations for open files") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Patch series "powerpc/crash: use generic crashkernel reservation", v3.
Commit 0ab97169aa05 ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Additionally move powerpc to use generic APIs to locate memory hole for
kexec segments while loading kdump kernel.
This patch (of 7):
kexec_elf_load() loads an ELF executable and sets the address of the
lowest PT_LOAD section to the address held by the lowest_load_addr
function argument.
To determine the lowest PT_LOAD address, a local variable lowest_addr
(type unsigned long) is initialized to UINT_MAX. After loading each
PT_LOAD, its address is compared to lowest_addr. If a loaded PT_LOAD
address is lower, lowest_addr is updated. However, setting lowest_addr to
UINT_MAX won't work when the kernel image is loaded above 4G, as the
returned lowest PT_LOAD address would be invalid. This is resolved by
initializing lowest_addr to ULONG_MAX instead.
This issue was discovered while implementing crashkernel high/low
reservation on the PowerPC architecture.
Link: https://lkml.kernel.org/r/20250131113830.925179-1-sourabhjain@linux.ibm.com Link: https://lkml.kernel.org/r/20250131113830.925179-2-sourabhjain@linux.ibm.com Fixes: a0458284f062 ("powerpc: Add support code for kexec_file_load()") Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
No need to specify the array size, let the compiler figure that out.
This addresses this compiler warning that was noticed while build
testing on fedora rawhide:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
util/units.c: In function 'unit_number__scnprintf':
util/units.c:67:24: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
67 | char unit[4] = "BKMG";
| ^~~~~~
cc1: all warnings being treated as errors
If a match was not found, then the write_raw() callback would return
the odr index, not an error. Return -EINVAL if this occurs.
To avoid similar issues in future, introduce j, a new indexing variable
rather than using ret for this purpose.
Fixes: 79de2ee469aa ("iio: accel: mma8452: claim direct mode during write raw") Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250217140135.896574-2-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Trying to record a trace on kernel with 64k pages resulted in -ENOMEM.
This happens due to a bug in calculating the number of table pages, which
returns zero. Fix the issue by rounding up.
$ perf record --kcore -e cs_etm/@tmc_etr55,cycacc,branch_broadcast/k --per-thread taskset --cpu-list 1 dd if=/dev/zero of=/dev/null
failed to mmap with 12 (Cannot allocate memory)
Fixes: 8ed536b1e283 ("coresight: catu: Add support for scatter gather tables") Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250109215348.5483-1-ilkka@os.amperecomputing.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In do_isofs_readdir() when assigning the variable
"struct iso_directory_record *de" the b_data field of the buffer_head
is accessed and an offset is added to it, the size of b_data is 2048
and the offset size is 2047, meaning
"de = (struct iso_directory_record *) (bh->b_data + offset);"
yields the final byte of the 2048 sized b_data block.
The first byte of the directory record (de_len) is then read and
found to be 31, meaning the directory record size is 31 bytes long.
The directory record is defined by the structure:
The fixed portion of this structure occupies 33 bytes. Therefore, a
valid directory record must be at least 33 bytes long
(even without considering the variable-length name field).
Since de_len is only 31, it is insufficient to contain
the complete fixed header.
The code later hits the following sanity check that
compares de_len against the sum of de->name_len and
sizeof(struct iso_directory_record):
if (de_len < de->name_len[0] + sizeof(struct iso_directory_record)) {
...
}
Since the fixed portion of the structure is
33 bytes (up to and including name_len member),
a valid record should have de_len of at least 33 bytes;
here, however, de_len is too short, and the field de->name_len
(located at offset 32) is accessed even though it lies beyond
the available 31 bytes.
This access on the corrupted isofs data triggers a KASAN uninitialized
memory warning. The fix would be to first verify that de_len is at least
sizeof(struct iso_directory_record) before accessing any
fields like de->name_len.
Reported-by: syzbot <syzbot+812641c6c3d7586a1613@syzkaller.appspotmail.com> Tested-by: syzbot <syzbot+812641c6c3d7586a1613@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=812641c6c3d7586a1613 Fixes: 2deb1acc653c ("isofs: fix access to unallocated memory when reading corrupted filesystem") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250211195900.42406-1-qasdev00@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the HMAC RFC, the authentication key
can be 0 bytes, and the hardware can handle this
scenario. Therefore, remove the incorrect validation
for this case.
Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2") Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2e4be0d011f2 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
was intended to ensure alignment of the stack pointer; but it also moved
the initialization of the "stack" variable down into the loop header.
This was likely intended as a no-op cleanup, since the commit
message does not mention it; however, this caused a behavioral change
because the value of "regs" is different between the two places.
Originally, get_stack_pointer() used the regs provided by the caller; after
that commit, get_stack_pointer() instead uses the regs at the top of the
stack frame the unwinder is looking at. Often, there are no such regs at
all, and "regs" is NULL, causing get_stack_pointer() to fall back to the
task's current stack pointer, which is not what we want here, but probably
happens to mostly work. Other times, the original regs will point to
another regs frame - in that case, the linear guess unwind logic in
show_trace_log_lvl() will start unwinding too far up the stack, causing the
first frame found by the proper unwinder to never be visited, resulting in
a stack trace consisting purely of guess lines.
Fix it by moving the "stack = " assignment back where it belongs.
If offset end up being high enough, right hand expression in functions
like sm501_gpio_set() shifted left for that number of bits, may
not fit in int type.
Just in case, fix that by using BIT() both as an option safe from
overflow issues and to make this step look similar to other gpio
drivers.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
When cur_qp isn't NULL, in order to avoid fetching the QP from
the radix tree again we check if the next cqe QP is identical to
the one we already have.
The bug however is that we are checking if the QP is identical by
checking the QP number inside the CQE against the QP number inside the
mlx5_ib_qp, but that's wrong since the QP number from the CQE is from
FW so it should be matched against mlx5_core_qp which is our FW QP
number.
Otherwise we could use the wrong QP when handling a CQE which could
cause the kernel trace below.
This issue is mainly noticeable over QPs 0 & 1, since for now they are
the only QPs in our driver whereas the QP number inside mlx5_ib_qp
doesn't match the QP number inside mlx5_core_qp.
The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693") Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
PUSH_REGS with save_ret=1 is used by interrupt entry helper functions that
initially start with a UNWIND_HINT_FUNC ORC state.
However, save_ret=1 means that we clobber the helper function's return
address (and then later restore the return address further down on the
stack); after that point, the only thing on the stack we can unwind through
is the IRET frame, so use UNWIND_HINT_IRET_REGS until we have a full
pt_regs frame.
( An alternate approach would be to move the pt_regs->di overwrite down
such that it is the final step of pt_regs setup; but I don't want to
rearrange entry code just to make unwinding a tiny bit more elegant. )
Fixes: 9e809d15d6b6 ("x86/entry: Reduce the code footprint of the 'idtentry' macro") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-1-acd774364768@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The bit index of the peripheral clock for mmc A is wrong
This was probably not a problem for mmc A as the peripheral is likely left
enabled by the bootloader.
No issues has been reported so far but it could be a problem, most likely
some form of conflict between the ethernet and mmc A clock, breaking
ethernet on init.
Use the value provided by the documentation for mmc A before this
becomes an actual problem.
The 32k clock reference a parent 'cts_slow_oscin' with a fixme note saying
that this clock should be provided by AO controller.
The HW probably has this clock but it does not exist at the moment in
any controller implementation. Furthermore, referencing clock by the global
name should be avoided whenever possible.
There is no reason to keep this hack around, at least for now.
Several clocks used by both g12a and g12b use the g12a cpu A clock hw
pointer as clock parent. This is incorrect on g12b since the parents of
cluster A cpu clock are different. Also the hw clock provided as parent to
these children is not even registered clock on g12b.
Fix the problem by reverting to the global namespace and let CCF pick
the appropriate, as it is already done for other clocks, such as
cpu_clk_trace_div.
Tegra devices have an 'sfsel' bit field that determines whether a pin
operates in SFIO (Special Function I/O) or GPIO mode. Currently,
tegra_pinctrl_gpio_disable_free() sets this bit when releasing a GPIO.
However, tegra_pinctrl_set_mux() can be called independently in certain
code paths where gpio_disable_free() is not invoked. In such cases, failing
to set the SFIO mode could lead to incorrect pin configurations, resulting
in functional issues for peripherals relying on SFIO.
This patch ensures that whenever set_mux() is called, the SFIO mode is
correctly set in the Mux Register if the 'sfsel' bit is present. This
prevents situations where the pin remains in GPIO mode despite being
configured for SFIO use.
The ib_post_receive_mads() function handles posting receive work
requests (WRs) to MAD QPs and is called in two cases:
1) When a MAD port is opened.
2) When a receive WQE is consumed upon receiving a new MAD.
Whereas, if MADs arrive during the port open phase, a race condition
might cause an extra WR to be posted, exceeding the QP’s capacity.
This leads to failures such as:
infiniband mlx5_0: ib_post_recv failed: -12
infiniband mlx5_0: Couldn't post receive WRs
infiniband mlx5_0: Couldn't start port
infiniband mlx5_0: Couldn't open port 1
Fix this by checking the current receive count before posting a new WR.
If the QP’s receive queue is full, do not post additional WRs.
Correct the clk_ref_usb3otg parent to fix clock control for the usb3
controller on rk3328. Verified against the rk3328 trm, the rk3228h trm,
and the rk3328 usb3 phy clock map.
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
The static code analysis tool "Coverity Scan" pointed the following
implementation details out for further development considerations:
CID 1309755: Unused value
In sw842_compress: A value assigned to a variable is never used. (CWE-563)
returned_value: Assigning value from add_repeat_template(p, repeat_count)
to ret here, but that stored value is overwritten before it can be used.
Conclusion:
Add error handling for the return value from an add_repeat_template()
call.
bpf_send_signal_common() uses preemptible() to check whether or not the
current context is preemptible. If it is preemptible, it will use
irq_work to send the signal asynchronously instead of trying to hold a
spin-lock, because spin-lock is sleepable under PREEMPT_RT.
However, preemptible() depends on CONFIG_PREEMPT_COUNT. When
CONFIG_PREEMPT_COUNT is turned off (e.g., CONFIG_PREEMPT_VOLUNTARY=y),
!preemptible() will be evaluated as 1 and bpf_send_signal_common() will
use irq_work unconditionally.
Fix it by unfolding "!preemptible()" and using "preempt_count() != 0 ||
irqs_disabled()" instead.
With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to
dereferencing `ctx->clk_data.hws` before setting
`ctx->clk_data.num = nr_clks`. Move that up to fix the crash.
UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
<snip>
Call trace:
samsung_clk_init+0x110/0x124 (P)
samsung_clk_init+0x48/0x124 (L)
samsung_cmu_register_one+0x3c/0xa0
exynos_arm64_register_cmu+0x54/0x64
__gs101_cmu_top_of_clk_init_declare+0x28/0x60
...
Fixes: e620a1e061c4 ("drivers/clk: convert VL struct to struct_size") Signed-off-by: Will McVicker <willmcvicker@google.com> Link: https://lore.kernel.org/r/20250212183253.509771-1-willmcvicker@google.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Only go into the if condition for single-PD handling when there's
actually just one power domain specified there. Otherwise it'll be an
issue in the dts and we should fail in the regular code path.
This also mirrors the latest changes in the qcom_q6v5_mss driver.
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org> Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains") Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org> Link: https://lore.kernel.org/r/20250128-pas-singlepd-v1-2-85d9ae4b0093@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mdacon has roughly the same dependencies as vgacon but expresses them
as a negative list instead of a positive list, with the only practical
difference being PowerPC/CHRP, which uses vga16fb instead of vgacon.
The CONFIG_MDA_CONSOLE description advises to only turn it on when vgacon
is also used because MDA/Hercules-only systems should be using vgacon
instead, so just change the list to enforce that directly for simplicity.
The probing was broken from 2002 to 2008, this improves on the fix
that was added then: If vgacon is a loadable module, then mdacon
cannot be built-in now, and the list of systems that support vgacon
is carried over.
Fixes: 0b9cf3aa6b1e ("mdacon messing up default vc's - set default to vc13-16 again") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “au1100fb_setmode”.
This issue was detected by using the Coccinelle software.
PCIe hotplug can operate in poll mode without interrupt handlers using a
polling kthread only. eb34da60edee ("PCI: pciehp: Disable hotplug
interrupt during suspend") failed to consider that and enables HPIE
(Hot-Plug Interrupt Enable) unconditionally when resuming the Port.
Only set HPIE if non-poll mode is in use. This makes
pcie_enable_interrupt() match how pcie_enable_notification() already
handles HPIE.
The issue is that ret is an int, recv_cnt is a u32 and the function
returns ssize_t, which is a signed long. The way that the type promotion
works is that the negative error codes are first cast to u32 and then
to signed long. The error codes end up being positive instead of
negative and the callers treat them as success.
Fixes: 81cc7e51c4f1 ("drm/mediatek: Allow commands to be sent during video mode") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202412210801.iADw0oIH-lkp@intel.com/ Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/b754a408-4f39-4e37-b52d-7706c132e27f@stanley.mountain/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a type mismatch between what CalculateDynamicMetadataParameters()
takes and what is passed to it. Currently this function accepts several
args as signed long but it's called with unsigned integers and integer. On
some systems where long is 32 bits and one of these unsigned int params is
greater than INT_MAX it may cause passing input params as negative values.
Fix this by changing these argument types from long to unsigned int and to
int respectively. Also this will align the function's definition with
similar functions in other dcn* drivers.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Firmware developers reported that Linux issues two PCIe hotplug commands in
very short intervals on an ARM server, which doesn't comply with the PCIe
spec. According to PCIe r6.1, sec 6.7.3.2, if the Command Completed event
is supported, software must wait for a command to complete or wait at
least 1 second before sending a new command.
In the failure case, the first PCIe hotplug command is from
get_port_device_capability(), which sends a command to disable PCIe hotplug
interrupts without waiting for its completion, and the second command comes
from pcie_enable_notification() of pciehp driver, which enables hotplug
interrupts again.
Fix this by only disabling the hotplug interrupts when the pciehp driver is
not enabled.
Per the Cadence's "PCIe Controller IP for AX14" user guide, Version
1.04, Section 9.1.7.1, "AXI Subordinate to PCIe Address Translation
Registers", Table 9.4, the bit 16 of the AXI Subordinate Address
(axi_s_awaddr) when set corresponds to MSG with data, and when not set,
to MSG without data.
However, the driver is currently doing the opposite and due to this,
the INTx is never received on the host.
So, fix the driver to reflect the documentation and also make INTx work.
Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller") Signed-off-by: Hans Zhang <18255117159@163.com> Signed-off-by: Hans Zhang <hans.zhang@cixtech.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20250214165724.184599-1-18255117159@163.com
[kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to
avoid use-after-free"), we would free the ASPM link only after the last
function on the bus pertaining to the given link was removed.
That was too late. If function 0 is removed before sibling function,
link->downstream would point to free'd memory after.
After above change, we freed the ASPM parent link state upon any function
removal on the bus pertaining to a given link.
That is too early. If the link is to a PCIe switch with MFD on the upstream
port, then removing functions other than 0 first would free a link which
still remains parent_link to the remaining downstream ports.
The resulting GPFs are especially frequent during hot-unplug, because
pciehp removes devices on the link bus in reverse order.
On that switch, function 0 is the virtual P2P bridge to the internal bus.
Free exactly when function 0 is removed -- before the parent link is
obsolete, but after all subordinate links are gone.
Link: https://lore.kernel.org/r/e12898835f25234561c9d7de4435590d957b85d9.1734924854.git.dns@arista.com Fixes: 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free") Signed-off-by: Daniel Stodden <dns@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The probe function of this driver may fail after registering the
audio platform device: in that case, the state is not getting
cleaned up, leaving this device registered.
Adding up to the mix, should the probe function of this driver
return a probe deferral for N times, we're registering up to N
audio platform devices and, again, never freeing them up.
To fix this, add a pointer to the audio platform device in the
mtk_hdmi structure, and add a devm action to unregister it upon
driver removal or probe failure.
[Why]
The RAD of sideband message printed today is incorrect.
For RAD stored within MST branch
- If MST branch LCT is 1, it's RAD array is untouched and remained as 0.
- If MST branch LCT is larger than 1, use nibble to store the up facing
port number in cascaded sequence as illustrated below:
In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port
number of one nibble.
[How]
Adjust the code by:
- RAD array items are valuable only for LCT >= 1.
- Use 0xF as the mask to replace BIT_MASK(4)
V2:
- Document how RAD is constructed (Imre)
V3:
- Adjust the comment for rad[] so kdoc formats it properly (Lyude)
Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests") Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
For 'ti,j7200-cpb-audio' compatible, there is support for only one PLL for
48k. For 11025, 22050, 44100 and 88200 sampling rates, due to absence of
J721E_CLK_PARENT_44100, we get EINVAL while running any audio application.
Add support for these rates by using the 48k parent clock and adjusting
the clock for these rates later in j721e_configure_refclk.
Fixes: 6748d0559059 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)") Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Link: https://patch.msgid.link/20250318113524.57100-1-j-choudhary@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The workaround for Dell machines to skip the pin-shutup for mic pins
introduced alc_headset_mic_no_shutup() that is replaced from the
generic snd_hda_shutup_pins() for certain codecs. The problem is that
the call is done unconditionally even if spec->no_shutup_pins is set.
This seems causing problems on other platforms like Lenovo.
This patch corrects the behavior and the driver honors always
spec->no_shutup_pins flag and skips alc_headset_mic_no_shutup() if
it's set.
The poll man page says POLLRDNORM is equivalent to POLLIN. For poll(),
it seems that if user sets pollfd with POLLRDNORM in userspace, perf_poll
will not return until timeout even if perf_output_wakeup called,
whereas POLLIN returns.
Fixes: 76369139ceb9 ("perf: Split up buffer handling from core code") Signed-off-by: Tao Chen <chen.dylane@linux.dev> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250314030036.2543180-1-chen.dylane@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
disable_irq_nosync_lockdep() disables interrupts with lockdep enabled to
avoid false positive reports by lockdep that a certain lock has not been
acquired with disabled interrupts. The user of this macros expects that
a lock can be acquried without disabling interrupts because the IRQ line
triggering the interrupt is disabled.
This triggers a warning on PREEMPT_RT because after
disable_irq_nosync_lockdep.*() the following spinlock_t now is acquired
with disabled interrupts.
On PREEMPT_RT there is no difference between spin_lock() and
spin_lock_irq() so avoiding disabling interrupts in this case works for
the two remaining callers as of today.
Don't disable interrupts on PREEMPT_RT in disable_irq_nosync_lockdep.*().
When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.
Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense. Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.
In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.
To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.
Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().
This change is based on a preliminary patch from Saravana Kannan.
Not all devices have an ACPI companion fwnode, so adev might be NULL.
This is similar to the commit cd2fd6eab480
("platform/x86: int3472: Check for adev == NULL").
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in int3402_thermal_probe().
Note, under the same directory, int3400_thermal_probe() has such a
check.
The EDAC_MC_LAYER_CHIP_SELECT layer pertains to the rank, not the DIMM.
Fix its size to reflect the number of ranks instead of the number of DIMMs.
Also delete the unused macros IE31200_{DIMMS,RANKS}.
Fixes: 7ee40b897d18 ("ie31200_edac: Introduce the driver") Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Tested-by: Gary Wang <gary.c.wang@intel.com> Link: https://lore.kernel.org/r/20250310011411.31685-2-qiuxu.zhuo@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Subshell evaluations are not exempt from errexit, so if a command is
not available, `which` will fail and exit the script as a whole.
This causes the helpful error messages to not be printed if they are
tacked on using a `$?` comparison.
Resolve the issue by using chains of logical operators, which are not
subject to the effects of errexit.
Fixes: e37c1877ba5b1 ("scripts/selinux: modernize mdp") Signed-off-by: Tim Schumacher <tim.schumacher1@huawei.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net Signed-off-by: Sasha Levin <sashal@kernel.org>
The CONFIG_EISA menu was cleaned up in 2018, but this inadvertently
brought the option back on 64-bit machines: ISA remains guarded by
a CONFIG_X86_32 check, but EISA no longer depends on ISA.
The last Intel machines ith EISA support used a 82375EB PCI/EISA bridge
from 1993 that could be paired with the 440FX chipset on early Pentium-II
CPUs, long before the first x86-64 products.
The init_task instance of struct task_struct is statically allocated and
may not contain the full FP state for userspace. As such, limit the copy
to the valid area of both init_task and 'dst' and ensure all memory is
initialized.
Note that the FP state is only needed for userspace, and as such it is
entirely reasonable for init_task to not contain parts of it.
Fixes: 5aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20250226133136.816901-1-benjamin@sipsolutions.net
----
v2:
- Fix code if arch_task_struct_size < sizeof(init_task) by using
memcpy_and_pad.
We observed an issue that the CPU frequency can't raise up with a 100% CPU
load when NOHZ is off and the 'conservative' governor is selected.
'idle_time' can be negative if it's obtained from get_cpu_idle_time_jiffy()
when NOHZ is off. This was found and explained in commit 9485e4ca0b48
("cpufreq: governor: Fix handling of special cases in dbs_update()").
However, commit 7592019634f8 ("cpufreq: governors: Fix long idle detection
logic in load calculation") introduced a comparison between 'idle_time' and
'samling_rate' to detect a long idle interval. While 'idle_time' is
converted to int before comparison, it's actually promoted to unsigned
again when compared with an unsigned 'sampling_rate'. Hence, this leads to
wrong idle interval detection when it's in fact 100% busy and sets
policy_dbs->idle_periods to a very large value. 'conservative' adjusts the
frequency to minimum because of the large 'idle_periods', such that the
frequency can't raise up. 'Ondemand' doesn't use policy_dbs->idle_periods
so it fortunately avoids the issue.
Correct negative 'idle_time' to 0 before any use of it in dbs_update().
Fixes: 7592019634f8 ("cpufreq: governors: Fix long idle detection logic in load calculation") Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Reviewed-by: Chen Yu <yu.c.chen@intel.com> Link: https://patch.msgid.link/20250213035510.2402076-1-zhanjie9@hisilicon.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The CPU rate from clk_get_rate() may not be divisible by 1000
(e.g., 133333333). But the rate calculated from frequency(kHz) is
always divisible by 1000 (e.g., 133333000).
Comparing the rate causes a warning during CPU scaling:
"cpufreq: __target_index: Failed to change cpu frequency: -5".
When we choose to compare kHz here, the issue does not occur.
The CPA_ARRAY test always uses len[1] as numpages argument to
change_page_attr_set() although the addresses array is different each
iteration of the test loop.
Replace len[1] with len[i] to have numpages matching the addresses array.
Currently, watch_queue_set_size() modifies the pipe buffers charged to
user->pipe_bufs without updating the pipe->nr_accounted on the pipe
itself, due to the if (!pipe_has_watch_queue()) test in
pipe_resize_ring(). This means that when the pipe is ultimately freed,
we decrement user->pipe_bufs by something other than what than we had
charged to it, potentially leading to an underflow. This in turn can
cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM.
To remedy this, explicitly account for the pipe usage in
watch_queue_set_size() to match the number set via account_pipe_buffers()
(It's unclear why watch_queue_set_size() does not update nr_accounted;
it may be due to intentional overprovisioning in watch_queue_set_size()?)
Fixes: e95aada4cb93d ("pipe: wakeup wr_wait after setting max_usage") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Link: https://lore.kernel.org/r/206682a8-0604-49e5-8224-fdbe0c12b460@redhat.com Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If dev_set_name() fails, the dev_name() is null, check the return
value of dev_set_name() to avoid the null-ptr-deref.
Fixes: 1413ef638aba ("i2c: dev: Fix the race between the release of i2c_dev and cdev") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Feng Liu <Feng.Liu3@windriver.com> Signed-off-by: He Zhe <Zhe.He@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using __exit for the remove function results in the remove callback
being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
==================================================================
BUG: KASAN: slab-use-after-free in rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
Read of size 8 at addr ffff888136335380 by task kworker/6:0/140241
Last potentially related work creation:
kasan_save_stack+0x20/0x40
kasan_record_aux_stack+0x85/0x90
insert_work+0x29/0x100
__queue_work+0x34a/0x540
call_timer_fn+0x2a/0x160
expire_timers+0x5f/0x1f0
__run_timer_base.part.0+0x1b6/0x1e0
run_timer_softirq+0x8b/0xe0
handle_softirqs+0xf9/0x360
__irq_exit_rcu+0x114/0x130
sysvec_apic_timer_interrupt+0x72/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
Second to last potentially related work creation:
kasan_save_stack+0x20/0x40
kasan_record_aux_stack+0x85/0x90
insert_work+0x29/0x100
__queue_work+0x34a/0x540
call_timer_fn+0x2a/0x160
expire_timers+0x5f/0x1f0
__run_timer_base.part.0+0x1b6/0x1e0
run_timer_softirq+0x8b/0xe0
handle_softirqs+0xf9/0x360
__irq_exit_rcu+0x114/0x130
sysvec_apic_timer_interrupt+0x72/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
The buggy address belongs to the object at ffff888136335000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 896 bytes inside of
freed 2048-byte region [ffff888136335000, ffff888136335800)
commit 8a7d12d674ac ("net: usb: usbnet: fix name regression") assumed
that local addresses always came from the kernel, but some devices hand
out local mac addresses so we ended up with point-to-point devices with
a mac set by the driver, renaming to eth%d when they used to be named
usb%d.
Userspace should not rely on device name, but for the sake of stability
restore the local mac address check portion of the naming exception:
point to point devices which either have no mac set by the driver or
have a local mac handed out by the driver will keep the usb%d name.
(some USB LTE modems are known to hand out a stable mac from the locally
administered range; that mac appears to be random (different for
mulitple devices) and can be reset with device-specific commands, so
while such devices would benefit from getting a OUI reserved, we have
to deal with these and might as well preserve the existing behavior
to avoid breaking fragile openwrt configurations and such on upgrade.)
Hardware initialize of the timer counter channel does not occur on probe
thus leaving the Count in an undefined state until the first
function_write() callback is executed. Fix this by performing the proper
hardware initialization during probe.
In case the stm32_lptim_set_enable_state() fails to update CMP and ARR,
a timeout error is raised, by regmap_read_poll_timeout. It may happen,
when the lptimer runs on a slow clock, and the clock is gated only
few times during the polling.
Badly, when this happen, STM32_LPTIM_ENABLE in CR register has been set.
So the 'enable' state in sysfs wrongly lies on the counter being
correctly enabled, due to CR is read as one in stm32_lptim_is_enabled().
To fix both issues:
- enable the clock before writing CMP, ARR and polling ISR bits. It will
avoid the possible timeout error.
- clear the ENABLE bit in CR and disable the clock in the error path.
Fixes: d8958824cf07 ("iio: counter: Add support for STM32 LPTimer") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20250224170657.3368236-1-fabrice.gasnier@foss.st.com Signed-off-by: William Breathitt Gray <wbg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to
restore the original 5-tuple in case of SNAT, to be able to find the
right socket (if any). Then socket_match() can correctly check whether
the socket was transparent.
However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this
conntrack lookup, making xt_socket fail to match on the socket when the
packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6.
IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as
pods' addresses are in the fd00::/8 ULA subnet and need to be replaced
with the node's external address. Cilium leverages Envoy to enforce L7
policies, and Envoy uses transparent sockets. Cilium inserts an iptables
prerouting rule that matches on `-m socket --transparent` and redirects
the packets to localhost, but it fails to match SNATed IPv6 packets due
to that missing conntrack lookup.
Closes: https://github.com/cilium/cilium/issues/37932 Fixes: eb31628e37a0 ("netfilter: nf_tables: Add support for IPv6 NAT") Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 169f9102f9198b ("ARM: 9350/1: fault: Implement
copy_from_kernel_nofault_allowed()") added the function to check address
before use. However, for devices without MMU, addr > TASK_SIZE will
always fail. This patch move this function after the #ifdef CONFIG_MMU
statement.
Under PAN emulation when dumping backtraces from things like the
LKDTM EXEC_USERSPACE test[1], a double fault (which would hang a CPU)
would happen because of dump_instr() attempting to read a userspace
address. Make sure copy_from_kernel_nofault() does not attempt this
any more.
Closes: https://lava.sirena.org.uk/scheduler/job/497571 Link: https://lore.kernel.org/all/202401181125.D48DCB4C@keescook/ Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When MPOA_cache_impos_rcvd() receives the msg, it can trigger
Null Pointer Dereference Vulnerability if both entry and
holding_time are NULL. Because there is only for the situation
where entry is NULL and holding_time exists, it can be passed
when both entry and holding_time are NULL. If these are NULL,
the entry will be passd to eg_cache_put() as parameter and
it is referenced by entry->use code in it.
Remove PLT_QUIRK_DOUBLE_VOLUME_KEYS quirk and made it generic.
The quirk logic did not keep track of the actual previous key
so any key event occurring in less than or equal to 5ms was ignored.
Remove PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS quirk.
It had the same logic issue as the double key quirk and was actually
masking the as designed behavior of most of the headsets.
It's occurrence should be minimized with the ALSA control naming
quirk that is part of the patch set.
Many Poly/Plantronics headset families name the feature, input,
and/or output units in a such a way to produce control names
that are not recognized by user space. As such, the volume and
mute events do not get routed to the headset's audio controls.
As an example from a product family:
The microphone mute control is named
Headset Microphone Capture Switch
and the headset volume control is named
Headset Earphone Playback Volume
The quirk fixes these to become
Headset Capture Switch
Headset Playback Volume
On the off chance that command stream passed from userspace via
ioctl() call to radeon_vce_cs_parse() is weirdly crafted and
first command to execute is to encode (case 0x03000001), the function
in question will attempt to call radeon_vce_cs_reloc() with size
argument that has not been properly initialized. Specifically, 'size'
will point to 'tmp' variable before the latter had a chance to be
assigned any value.
Play it safe and init 'tmp' with 0, thus ensuring that
radeon_vce_cs_reloc() will catch an early error in cases like these.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 2fc5703abda2 ("drm/radeon: check VCE relocation buffer range v3") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2d52de55f9ee7aaee0e09ac443f77855989c6b68) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When some client process A call pdr_add_lookup() to add the look up for
the service and does schedule locator work, later a process B got a new
server packet indicating locator is up and call pdr_locator_new_server()
which eventually sets pdr->locator_init_complete to true which process A
sees and takes list lock and queries domain list but it will timeout due
to deadlock as the response will queued to the same qmi->wq and it is
ordered workqueue and process B is not able to complete new server
request work due to deadlock on list lock.
Fix it by removing the unnecessary list iteration as the list iteration
is already being done inside locator work, so avoid it here and just
call schedule_work() here.
pdr_get_domain_list()
pr_err("PDR: %s get domain list
txn wait failed: %d\n",
req->service_name,
ret);
Timeout error log due to deadlock:
"
PDR: tms/servreg get domain list txn wait failed: -110
PDR: service lookup for msm/adsp/sensor_pd:tms/servreg failed: -110
"
Thanks to Bjorn and Johan for letting me know that this commit also fixes
an audio regression when using the in-kernel pd-mapper as that makes it
easier to hit this race. [1]
An OGMv1 and OGMv2 packet receive processing were not only limited by the
number of bytes in the received packet but also by the nodes maximum
aggregation packet size limit. But this limit is relevant for TX and not
for RX. It must not be enforced by batadv_(i)v_ogm_aggr_packet to avoid
loss of information in case of a different limit for sender and receiver.
This has a minor side effect for B.A.T.M.A.N. IV because the
batadv_iv_ogm_aggr_packet is also used for the preprocessing for the TX.
But since the aggregation code itself will not allow more than
BATADV_MAX_AGGREGATION_BYTES bytes, this check was never triggering (in
this context) prior of removing it.
Element replace (with a socket different from the one stored) may race
with socket's close() link popping & unlinking. __sock_map_delete()
unconditionally unrefs the (wrong) element:
// set map[0] = s0
map_update_elem(map, 0, s0)
// drop fd of s0
close(s0)
sock_map_close()
lock_sock(sk) (s0!)
sock_map_remove_links(sk)
link = sk_psock_link_pop()
sock_map_unlink(sk, link)
sock_map_delete_from_link
// replace map[0] with s1
map_update_elem(map, 0, s1)
sock_map_update_elem
(s1!) lock_sock(sk)
sock_map_update_common
psock = sk_psock(sk)
spin_lock(&stab->lock)
osk = stab->sks[idx]
sock_map_add_link(..., &stab->sks[idx])
sock_map_unref(osk, &stab->sks[idx])
psock = sk_psock(osk)
sk_psock_put(sk, psock)
if (refcount_dec_and_test(&psock))
sk_psock_drop(sk, psock)
spin_unlock(&stab->lock)
unlock_sock(sk)
__sock_map_delete
spin_lock(&stab->lock)
sk = *psk // s1 replaced s0; sk == s1
if (!sk_test || sk_test == sk) // sk_test (s0) != sk (s1); no branch
sk = xchg(psk, NULL)
if (sk)
sock_map_unref(sk, psk) // unref s1; sks[idx] will dangle
psock = sk_psock(sk)
sk_psock_put(sk, psock)
if (refcount_dec_and_test())
sk_psock_drop(sk, psock)
spin_unlock(&stab->lock)
release_sock(sk)
Then close(map) enqueues bpf_map_free_deferred, which finally calls
sock_map_free(). This results in some refcount_t warnings along with
a KASAN splat [1].
Fix __sock_map_delete(), do not allow sock_map_unref() on elements that
may have been replaced.
[1]:
BUG: KASAN: slab-use-after-free in sock_map_free+0x10e/0x330
Write of size 4 at addr ffff88811f5b9100 by task kworker/u64:12/1063
The buggy address belongs to the object at ffff88811f5b9080
which belongs to the cache UNIX-STREAM of size 1984
The buggy address is located 128 bytes inside of
freed 1984-byte region [ffff88811f5b9080, ffff88811f5b9840)
Memory state around the buggy address: ffff88811f5b9000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88811f5b9080: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff88811f5b9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88811f5b9200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Disabling lock debugging due to kernel taint
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20241202-sockmap-replace-v1-3-1e88579e7bd5@rbox.co Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This aligned BR/EDR JUST_WORKS method with LE which since 92516cd97fd4
("Bluetooth: Always request for user confirmation for Just Works")
always request user confirmation with confirm_hint set since the
likes of bluetoothd have dedicated policy around JUST_WORKS method
(e.g. main.conf:JustWorksRepairing).
CVE: CVE-2024-8805 Cc: stable@vger.kernel.org Fixes: ba15a58b179e ("Bluetooth: Fix SSP acceptor just-works confirmation without MITM") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Kiran K <kiran.k@intel.com> Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.
v2:
* Add missing fix in dp_max_bpc_write (Harry Wentland)
Fixes: 918698d5c2b5 ("drm/amd/display: Return the number of bytes parsed than allocated") Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
[ Cherry-pick the fix and drop the following functions which were introduced
since 5.13 or later: dp_max_bpc_write() was introduced in commit cca912e0a6b4
("drm/amd/display: Add max bpc debugfs") dp_dsc_passthrough_set() was
introduced in commit fcd1e484c8ae ("drm/amd/display: Add debugfs entry for
dsc passthrough"). ] Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the addresses of the shmobile_smp_mpidr, shmobile_smp_fn, and
shmobile_smp_arg variables are not multiples of 4 bytes, secondary CPU
bring-up fails:
smp: Bringing up secondary CPUs ...
CPU1: failed to come online
CPU2: failed to come online
CPU3: failed to come online
smp: Brought up 1 node, 1 CPU
Fix this by adding the missing alignment directive.
Fix race between rmmod and /proc/XXX's inode instantiation.
The bug is that pde->proc_ops don't belong to /proc, it belongs to a
module, therefore dereferencing it after /proc entry has been registered
is a bug unless use_pde/unuse_pde() pair has been used.
use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops
never changes so information necessary for inode instantiation can be
saved _before_ proc_register() in PDE itself and used later, avoiding
pde->proc_ops->... dereference.
[adobriyan@gmail.com: don't do 2 atomic ops on the common path] Link: https://lkml.kernel.org/r/3d25ded0-1739-447e-812b-e34da7990dcf@p183 Fixes: 778f3dd5a13c ("Fix procfs compat_ioctl regression") Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error path when atmci_configure_dma() set dma fails in atmci driver
does not correctly disable the clock.
Add the missing clk_disable_unprepare() to the error path for pair with
clk_prepare_enable().
Fixes: 467e081d23e6 ("mmc: atmel-mci: use probe deferring if dma controller is not ready yet") Signed-off-by: Gu Bowen <gubowen5@huawei.com> Acked-by: Aubin Constans <aubin.constans@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250225022856.3452240-1-gubowen5@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The V3D driver still relies on `drm_sched_increase_karma()` and
`drm_sched_resubmit_jobs()` for resubmissions when a timeout occurs.
The function `drm_sched_increase_karma()` marks the job as guilty, while
`drm_sched_resubmit_jobs()` sets an error (-ECANCELED) in the DMA fence of
that guilty job.
Because of this, we must check whether the job’s DMA fence has been
flagged with an error before executing the job. Otherwise, the same guilty
job may be resubmitted indefinitely, causing repeated GPU resets.
This patch adds a check for an error on the job's fence to prevent running
a guilty job that was previously flagged when the GPU timed out.
Note that the CPU and CACHE_CLEAN queues do not require this check, as
their jobs are executed synchronously once the DRM scheduler starts them.
Cc: stable@vger.kernel.org Fixes: d223f98f0209 ("drm/v3d: Add support for compute shader dispatch.") Fixes: 1584f16ca96e ("drm/v3d: Add support for submitting jobs to the TFU.") Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250313-v3d-gpu-reset-fixes-v4-1-c1e780d8e096@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the GTA04A5 writing a reset command to the gyroscope causes IRQ
storms because NACK IRQs are enabled and therefore triggered but not
acked.
Sending a reset command to the gyroscope by
i2cset 1 0x69 0x14 0xb6
with an additional debug print in the ISR (not the thread) itself
causes
[ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00
[ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1
[ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110)
[ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010)
[ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
repeating till infinity
[...]
(0x2 = NACK, 0x100 = Bus free, which is not enabled)
Apparently no other IRQ bit gets set, so this stalls.
Do not ignore enabled interrupts and make sure they are acked.
If the NACK IRQ is not needed, it should simply not enabled, but
according to the above log, caring about it is necessary unless
the Bus free IRQ is enabled and handled. The assumption that is
will always come with a ARDY IRQ, which was the idea behind
ignoring it, proves wrong.
It is true for simple reads from an unused address.
To still avoid the i2cdetect trouble which is the reason for
commit c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"),
avoid doing much about NACK in omap_i2c_xfer_data() which is used
by both IRQ mode and polling mode, so also the false detection fix
is extended to polling usage and IRQ storms are avoided.
By changing this, the hardirq handler is not needed anymore to filter
stuff.
The mentioned gyro reset now just causes a -ETIMEDOUT instead of
hanging the system.
Previous commit 8b5c171bb3dc ("neigh: new unresolved queue limits")
introduces new netlink attribute NDTPA_QUEUE_LENBYTES to represent
approximative value for deprecated QUEUE_LEN. However, it forgot to add
the associated nla_policy in nl_ntbl_parm_policy array. Fix it with one
simple NLA_U32 type policy.
Fixes: 8b5c171bb3dc ("neigh: new unresolved queue limits") Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://patch.msgid.link/20250315165113.37600-1-linma@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While creating a new IPv6, we could get a weird -ENOMEM when
RTA_NH_ID is set and either of the conditions below is true:
1) CONFIG_IPV6_SUBTREES is enabled and rtm_src_len is specified
2) nexthop_get() fails
e.g.)
# strace ip -6 route add fe80::dead:beef:dead:beef nhid 1 from ::
recvmsg(3, {msg_iov=[{iov_base=[...[
{error=-ENOMEM, msg=[... [...]]},
[{nla_len=49, nla_type=NLMSGERR_ATTR_MSG}, "Nexthops can not be used with so"...]
]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
Let's set err explicitly after ip_fib_metrics_init() in
ip6_route_info_create().
Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250312013854.61125-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything
when it fails.
Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh")
moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init()
but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in
case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak.
Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the
error path.
Note that we can remove the fib6_nh_release() call in nh_create_ipv6()
later in net-next.git.
Fixes: 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250312010333.56001-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Driver runs a for-loop when allocating bt pages and mapping them with
buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated,
it may require a considerable loop count. This will lead to soft lockup:
Add a cond_resched() to fix soft lockup during these loops. In order not
to affect the allocation performance of normal-size buffer, set the loop
count of a 100GB MR as the threshold to call cond_resched().
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing") Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250311084857.3803665-3-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
