Currently when the system is trying to uninstall the ACPI interrupt
handler, it uses acpi_gbl_FADT.sci_interrupt as the IRQ number.
However, the IRQ number that the ACPI interrupt handled is installed
for comes from acpi_gsi_to_irq() and that is the number that should
be used for the handler removal.
Fix this problem by using the mapped IRQ returned from acpi_gsi_to_irq()
as appropriate.
Acked-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This adds the USB ID for the Sitecom WLA2100. The Windows 10 inf file
was checked to verify that the addition is correct.
Reported-by: Frans van de Wiel <fvdw@fvdw.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Frans van de Wiel <fvdw@fvdw.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The DMA-slave configuration depends on the whether <= 8 or > 8 bits
are transferred per word, so we need to call
atmel_spi_dma_slave_config() with the correct value.
Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The HIDP specs define an idle-timeout which automatically disconnects a
device. This has always been implemented in the HIDP layer and forced a
synchronous shutdown of the hidp-scheduler. This works just fine, but
lacks a forced disconnect on the underlying l2cap channels. This has been
broken since:
The old session-management always forced an l2cap error on the ctrl/intr
channels when shutting down. The new session-management skips this, as we
don't want to enforce channel policy on the caller. In other words, if
user-space removes an HIDP device, the underlying channels (which are
*owned* and *referenced* by user-space) are still left active. User-space
needs to call shutdown(2) or close(2) to release them.
Unfortunately, this does not work with idle-timeouts. There is no way to
signal user-space that the HIDP layer has been stopped. The API simply
does not support any event-passing except for poll(2). Hence, we restore
old behavior and force EUNATCH on the sockets if the HIDP layer is
disconnected due to idle-timeouts (behavior of explicit disconnects
remains unmodified). User-space can still call
getsockopt(..., SO_ERROR, ...)
..to retrieve the EUNATCH error and clear sk_err. Hence, the channels can
still be re-used (which nobody does so far, though). Therefore, the API
still supports the new behavior, but with this patch it's also compatible
to the old implicit channel shutdown.
Reported-by: Mark Haun <haunma@keteu.org> Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
In videobuf2 dma-contig memory type the prepare and finish ops, instead of
passing the number of entries in the original scatterlist as the "nents"
parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value
returned by dma_map_sg() was used. Albeit this has been suggested in
comments of some implementations (which have since been corrected), this
is wrong.
Fixes: 199d101efdba ("v4l: vb2-dma-contig: add prepare/finish to dma-contig allocator") Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The following warning occurs when DW SPI is compiled as a module and it's a PCI
device. On the removal stage pcibios_free_irq() is called earlier than
free_irq() due to the latter is called at managed resources free strage.
Explicitly call free_irq() at removal stage of the DW SPI driver.
Fixes: 04f421e7b0b1 (spi: dw: use managed resources) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
At ibm vtpm initialzation, tpm_ibmvtpm_probe() registers its interrupt
handler, ibmvtpm_interrupt, which calls ibmvtpm_crq_process to allocate
memory for rtce buffer. The current code uses 'GFP_KERNEL' as the
type of kernel memory allocation, which resulted a warning at
kernel/lockdep.c. This patch uses 'GFP_ATOMIC' instead so that the
allocation is high-priority and does not sleep.
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the
journaling will be aborted first and the error number will be recorded
into JBD2 superblock and, finally, the system will enter into the
panic state in "errors=panic" option. But, in the rare case, this
sequence is little twisted like the below figure and it will happen
that the system enters into panic state, which means the system reset
in mobile environment, before completion of recording an error in the
journal superblock. In this case, e2fsck cannot recognize that the
filesystem failure occurred in the previous run and the corruption
wouldn't be fixed.
"group" is the group where the backup will be placed, and is
initialized to zero in the declaration. This meant that backups for
meta_bg descriptors were erroneously written to the backup block group
descriptors in groups 1 and (desc_per_block-1).
There is a use-after-free possibility in __ext4_journal_stop() in the
case that we free the handle in the first jbd2_journal_stop() because
we're referencing handle->h_err afterwards. This was introduced in 9705acd63b125dee8b15c705216d7186daea4625 and it is wrong. Fix it by
storing the handle->h_err value beforehand and avoid referencing
potentially freed handle.
Fixes: 9705acd63b125dee8b15c705216d7186daea4625 Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
When truncating a file to a smaller size which consists of an inline
extent that is compressed, we did not discard (or made unusable) the
data between the new file size and the old file size, wasting metadata
space and allowing for the truncated data to be leaked and the data
corruption/loss mentioned below.
We were also not correctly decrementing the number of bytes used by the
inode, we were setting it to zero, giving a wrong report for callers of
the stat(2) syscall. The fsck tool also reported an error about a mismatch
between the nbytes of the file versus the real space used by the file.
Now because we weren't discarding the truncated region of the file, it
was possible for a caller of the clone ioctl to actually read the data
that was truncated, allowing for a security breach without requiring root
access to the system, using only standard filesystem operations. The
scenario is the following:
1) User A creates a file which consists of an inline and compressed
extent with a size of 2000 bytes - the file is not accessible to
any other users (no read, write or execution permission for anyone
else);
2) The user truncates the file to a size of 1000 bytes;
3) User A makes the file world readable;
4) User B creates a file consisting of an inline extent of 2000 bytes;
5) User B issues a clone operation from user A's file into its own
file (using a length argument of 0, clone the whole range);
6) User B now gets to see the 1000 bytes that user A truncated from
its file before it made its file world readbale. User B also lost
the bytes in the range [1000, 2000[ bytes from its own file, but
that might be ok if his/her intention was reading stale data from
user A that was never supposed to be public.
Note that this contrasts with the case where we truncate a file from 2000
bytes to 1000 bytes and then truncate it back from 1000 to 2000 bytes. In
this case reading any byte from the range [1000, 2000[ will return a value
of 0x00, instead of the original data.
This problem exists since the clone ioctl was added and happens both with
and without my recent data loss and file corruption fixes for the clone
ioctl (patch "Btrfs: fix file corruption and data loss after cloning
inline extents").
So fix this by truncating the compressed inline extents as we do for the
non-compressed case, which involves decompressing, if the data isn't already
in the page cache, compressing the truncated version of the extent, writing
the compressed content into the inline extent and then truncate it.
The following test case for fstests reproduces the problem. In order for
the test to pass both this fix and my previous fix for the clone ioctl
that forbids cloning a smaller inline extent into a larger one,
which is titled "Btrfs: fix file corruption and data loss after cloning
inline extents", are needed. Without that other fix the test fails in a
different way that does not leak the truncated data, instead part of
destination file gets replaced with zeroes (because the destination file
has a larger inline extent than the source).
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
# Create our test files. File foo is going to be the source of a clone operation
# and consists of a single inline extent with an uncompressed size of 512 bytes,
# while file bar consists of a single inline extent with an uncompressed size of
# 256 bytes. For our test's purpose, it's important that file bar has an inline
# extent with a size smaller than foo's inline extent.
$XFS_IO_PROG -f -c "pwrite -S 0xa1 0 128" \
-c "pwrite -S 0x2a 128 384" \
$SCRATCH_MNT/foo | _filter_xfs_io
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 256" $SCRATCH_MNT/bar | _filter_xfs_io
# Now durably persist all metadata and data. We do this to make sure that we get
# on disk an inline extent with a size of 512 bytes for file foo.
sync
# Now truncate our file foo to a smaller size. Because it consists of a
# compressed and inline extent, btrfs did not shrink the inline extent to the
# new size (if the extent was not compressed, btrfs would shrink it to 128
# bytes), it only updates the inode's i_size to 128 bytes.
$XFS_IO_PROG -c "truncate 128" $SCRATCH_MNT/foo
# Now clone foo's inline extent into bar.
# This clone operation should fail with errno EOPNOTSUPP because the source
# file consists only of an inline extent and the file's size is smaller than
# the inline extent of the destination (128 bytes < 256 bytes). However the
# clone ioctl was not prepared to deal with a file that has a size smaller
# than the size of its inline extent (something that happens only for compressed
# inline extents), resulting in copying the full inline extent from the source
# file into the destination file.
#
# Note that btrfs' clone operation for inline extents consists of removing the
# inline extent from the destination inode and copy the inline extent from the
# source inode into the destination inode, meaning that if the destination
# inode's inline extent is larger (N bytes) than the source inode's inline
# extent (M bytes), some bytes (N - M bytes) will be lost from the destination
# file. Btrfs could copy the source inline extent's data into the destination's
# inline extent so that we would not lose any data, but that's currently not
# done due to the complexity that would be needed to deal with such cases
# (specially when one or both extents are compressed), returning EOPNOTSUPP, as
# it's normally not a very common case to clone very small files (only case
# where we get inline extents) and copying inline extents does not save any
# space (unlike for normal, non-inlined extents).
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Now because the above clone operation used to succeed, and due to foo's inline
# extent not being shinked by the truncate operation, our file bar got the whole
# inline extent copied from foo, making us lose the last 128 bytes from bar
# which got replaced by the bytes in range [128, 256[ from foo before foo was
# truncated - in other words, data loss from bar and being able to read old and
# stale data from foo that should not be possible to read anymore through normal
# filesystem operations. Contrast with the case where we truncate a file from a
# size N to a smaller size M, truncate it back to size N and then read the range
# [M, N[, we should always get the value 0x00 for all the bytes in that range.
# We expected the clone operation to fail with errno EOPNOTSUPP and therefore
# not modify our file's bar data/metadata. So its content should be 256 bytes
# long with all bytes having the value 0xbb.
#
# Without the btrfs bug fix, the clone operation succeeded and resulted in
# leaking truncated data from foo, the bytes that belonged to its range
# [128, 256[, and losing data from bar in that same range. So reading the
# file gave us the following content:
#
# 0000000 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1
# *
# 0000200 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a
# *
# 0000400
echo "File bar's content after the clone operation:"
od -t x1 $SCRATCH_MNT/bar
# Also because the foo's inline extent was not shrunk by the truncate
# operation, btrfs' fsck, which is run by the fstests framework everytime a
# test completes, failed reporting the following error:
#
# root 5 inode 257 errors 400, nbytes wrong
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The VT-d specification says that "Software must enable ATS on endpoint
devices behind a Root Port only if the Root Port is reported as
supporting ATS transactions."
We walk up the tree to find a Root Port, but for integrated devices we
don't find one — we get to the host bridge. In that case we *should*
allow ATS. Currently we don't, which means that we are incorrectly
failing to use ATS for the integrated graphics. Fix that.
We should never break out of this loop "naturally" with bus==NULL,
since we'll always find bridge==NULL in that case (and now return 1).
So remove the check for (!bridge) after the loop, since it can never
happen. If it did, it would be worthy of a BUG_ON(!bridge). But since
it'll oops anyway in that case, that'll do just as well.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Currently the clone ioctl allows to clone an inline extent from one file
to another that already has other (non-inlined) extents. This is a problem
because btrfs is not designed to deal with files having inline and regular
extents, if a file has an inline extent then it must be the only extent
in the file and must start at file offset 0. Having a file with an inline
extent followed by regular extents results in EIO errors when doing reads
or writes against the first 4K of the file.
Also, the clone ioctl allows one to lose data if the source file consists
of a single inline extent, with a size of N bytes, and the destination
file consists of a single inline extent with a size of M bytes, where we
have M > N. In this case the clone operation removes the inline extent
from the destination file and then copies the inline extent from the
source file into the destination file - we lose the M - N bytes from the
destination file, a read operation will get the value 0x00 for any bytes
in the the range [N, M] (the destination inode's i_size remained as M,
that's why we can read past N bytes).
So fix this by not allowing such destructive operations to happen and
return errno EOPNOTSUPP to user space.
Currently the fstest btrfs/035 tests the data loss case but it totally
ignores this - i.e. expects the operation to succeed and does not check
the we got data loss.
The following test case for fstests exercises all these cases that result
in file corruption and data loss:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
_require_btrfs_fs_feature "no_holes"
_require_btrfs_mkfs_feature "no-holes"
rm -f $seqres.full
test_cloning_inline_extents()
{
local mkfs_opts=$1
local mount_opts=$2
# File bar, the source for all the following clone operations, consists
# of a single inline extent (50 bytes).
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 50" $SCRATCH_MNT/bar \
| _filter_xfs_io
# Test cloning into a file with an extent (non-inlined) where the
# destination offset overlaps that extent. It should not be possible to
# clone the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 16K" $SCRATCH_MNT/foo \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "File foo data after clone operation:"
# All bytes should have the value 0xaa (clone operation failed and did
# not modify our file).
od -t x1 $SCRATCH_MNT/foo
$XFS_IO_PROG -c "pwrite -S 0xcc 0 100" $SCRATCH_MNT/foo | _filter_xfs_io
# Test cloning the inline extent against a file which has a hole in its
# first 4K followed by a non-inlined extent. It should not be possible
# as well to clone the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "pwrite -S 0xdd 4K 12K" $SCRATCH_MNT/foo2 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo2
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "File foo2 data after clone operation:"
# All bytes should have the value 0x00 (clone operation failed and did
# not modify our file).
od -t x1 $SCRATCH_MNT/foo2
$XFS_IO_PROG -c "pwrite -S 0xee 0 90" $SCRATCH_MNT/foo2 | _filter_xfs_io
# Test cloning the inline extent against a file which has a size of zero
# but has a prealloc extent. It should not be possible as well to clone
# the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "falloc -k 0 1M" $SCRATCH_MNT/foo3 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo3
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "First 50 bytes of foo3 after clone operation:"
# Should not be able to read any bytes, file has 0 bytes i_size (the
# clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo3
$XFS_IO_PROG -c "pwrite -S 0xff 0 90" $SCRATCH_MNT/foo3 | _filter_xfs_io
# Test cloning the inline extent against a file which consists of a
# single inline extent that has a size not greater than the size of
# bar's inline extent (40 < 50).
# It should be possible to do the extent cloning from bar to this file.
$XFS_IO_PROG -f -c "pwrite -S 0x01 0 40" $SCRATCH_MNT/foo4 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo4
# Doing IO against any range in the first 4K of the file should work.
echo "File foo4 data after clone operation:"
# Must match file bar's content.
od -t x1 $SCRATCH_MNT/foo4
$XFS_IO_PROG -c "pwrite -S 0x02 0 90" $SCRATCH_MNT/foo4 | _filter_xfs_io
# Test cloning the inline extent against a file which consists of a
# single inline extent that has a size greater than the size of bar's
# inline extent (60 > 50).
# It should not be possible to clone the inline extent from file bar
# into this file.
$XFS_IO_PROG -f -c "pwrite -S 0x03 0 60" $SCRATCH_MNT/foo5 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo5
# Reading the file should not fail.
echo "File foo5 data after clone operation:"
# Must have a size of 60 bytes, with all bytes having a value of 0x03
# (the clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo5
# Test cloning the inline extent against a file which has no extents but
# has a size greater than bar's inline extent (16K > 50).
# It should not be possible to clone the inline extent from file bar
# into this file.
$XFS_IO_PROG -f -c "truncate 16K" $SCRATCH_MNT/foo6 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo6
# Reading the file should not fail.
echo "File foo6 data after clone operation:"
# Must have a size of 16K, with all bytes having a value of 0x00 (the
# clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo6
# Test cloning the inline extent against a file which has no extents but
# has a size not greater than bar's inline extent (30 < 50).
# It should be possible to clone the inline extent from file bar into
# this file.
$XFS_IO_PROG -f -c "truncate 30" $SCRATCH_MNT/foo7 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo7
# Reading the file should not fail.
echo "File foo7 data after clone operation:"
# Must have a size of 50 bytes, with all bytes having a value of 0xbb.
od -t x1 $SCRATCH_MNT/foo7
# Test cloning the inline extent against a file which has a size not
# greater than the size of bar's inline extent (20 < 50) but has
# a prealloc extent that goes beyond the file's size. It should not be
# possible to clone the inline extent from bar into this file.
$XFS_IO_PROG -f -c "falloc -k 0 1M" \
-c "pwrite -S 0x88 0 20" \
$SCRATCH_MNT/foo8 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo8
echo "File foo8 data after clone operation:"
# Must have a size of 20 bytes, with all bytes having a value of 0x88
# (the clone operation did not modify our file).
od -t x1 $SCRATCH_MNT/foo8
_scratch_unmount
}
echo -e "\nTesting without compression and without the no-holes feature...\n"
test_cloning_inline_extents
echo -e "\nTesting with compression and without the no-holes feature...\n"
test_cloning_inline_extents "" "-o compress"
echo -e "\nTesting without compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" ""
echo -e "\nTesting with compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" "-o compress"
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Commit cb7323fffa85 ("lockd: create and use per-net NSM
RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.
E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.
1. nsm_monitor(host_X) called => NSM rpc client created,
nsm->sm_monitored bit set.
2. nsm_mointor(host-Y) called => nsm->sm_monitored already set,
we just exit. Thus in namespace B ln->nsm_clnt == NULL.
3. host X destroyed => nsm->sm_count decremented to 1
4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr
dereference of *ln->nsm_clnt
So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Writing invalid command to QSPI_SPI_CMD_REG will terminate current
transfer and de-assert the chip select. This has to be done before
calling spi_finalize_current_message(). Because
spi_finalize_current_message() will mark the end of current message
transfer and schedule the next transfer. If the chipselect is not
de-asserted before calling spi_finalize_current_message() then the next
transfer will overlap with the previous transfer leading to data
corruption.
__spi_pump_message() can be called either from kthread worker context or
directly from the calling process's context. It is possible that these
two calls can race against each other. But race is serialized by
checking whether master->cur_msg == NULL (pointer to msg being handled
by transfer_one() at present). The master->cur_msg is set to NULL when
spi_finalize_current_message() is called on that message, which means
calling spi_finalize_current_message() allows __spi_sync() to pump next
message in calling process context.
Now if spi-ti-qspi calls spi_finalize_current_message() before we
terminate transfer at hardware side, if __spi_pump_message() is called
from process context then the successive transactions can overlap.
Fix this by moving writing invalid command to QSPI_SPI_CMD_REG to
before calling spi_finalize_current_message() call.
Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
IOMMU-based dma_mmap() implementation lacked proper support for offset
parameter used in mmap call (it always assumed that mapping starts from
offset zero). This patch adds support for offset parameter to IOMMU-based
implementation.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
dma_mmap() function in IOMMU-based dma-mapping implementation lacked
a check for valid range of mmap parameters (offset and buffer size), what
might have caused access beyond the allocated buffer. This patch fixes
this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
If we fail to allocate a partition structure in the middle of the partition
creation process, the already allocated partitions are never removed, which
means they are still present in the partition list and their resources are
never freed.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The CPU_MAP register is duplicated for each CPUs at different addresses,
each instance being at a different address.
However, the code so far was using CONFIG_NR_CPUS to initialise the CPU_MAP
registers for each registers, while the SoCs embed at most 4 CPUs.
This is especially an issue with multi_v7_defconfig, where CONFIG_NR_CPUS
is currently set to 16, resulting in writes to registers that are not
CPU_MAP.
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Alignment/padding rules on AMD64 and ARM64 differs. To allow properly match
compatible ioctls on ARM64 kernels without breaking AMD64 some fields
should be aligned using compat_s64 type and in one case struct should be
unpacked.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
[hans.verkuil@cisco.com: use compat_u64 instead of compat_s64 in v4l2_input32] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
hid_connect adds various strings to the buffer but they're all
conditional. You can find circumstances where nothing would be written
to it but the kernel will still print the supposedly empty buffer with
printk. This leads to corruption on the console/in the logs.
Ensure buf is initialized to an empty string.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[dvhart: Initialize string to "" rather than assign buf[0] = NULL;] Cc: Jiri Kosina <jikos@kernel.org> Cc: linux-input@vger.kernel.org Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Sanitizing the e820 map may produce extra E820 entries which would result in
the topmost E820 entries being removed. The removed entries would typically
include the top E820 usable RAM region and thus result in the domain having
signicantly less RAM available to it.
Fix by allowing sanitize_e820_map to use the full size of the allocated E820
array.
Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[ luis: backported to 3.16:
- use 'map' instead of 'xen_e820_map_entries' ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
A test case is as the description says:
open(foobar, O_WRONLY);
sleep() --> reboot the server
close(foobar)
The bug is because in nfs4state.c in nfs4_reclaim_open_state() a few
line before going to restart, there is
clear_bit(NFS4CLNT_RECLAIM_NOGRACE, &state->flags).
NFS4CLNT_RECLAIM_NOGRACE is a flag for the client states not open
owner states. Value of NFS4CLNT_RECLAIM_NOGRACE is 4 which is the
value of NFS_O_WRONLY_STATE in nfs4_state->flags. So clearing it wipes
out state and when we go to close it, “call_close” doesn’t get set as
state flag is not set and CLOSE doesn’t go on the wire.
Signed-off-by: Olga Kornievskaia <aglo@umich.edu> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Only cpu seeing dst refcount going to 0 can safely
dereference dst->flags.
Otherwise an other cpu might already have freed the dst.
Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst") Reported-by: Greg Thelen <gthelen@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Under low memory conditions, tcp_sk_init() and icmp_sk_init()
can both iterate on all possible cpus and call inet_ctl_sock_destroy(),
with eventual NULL pointer.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
There is a race conditions between packet_notifier and packet_bind{_spkt}.
It happens if packet_notifier(NETDEV_UNREGISTER) executes between the
time packet_bind{_spkt} takes a reference on the new netdevice and the
time packet_do_bind sets po->ifindex.
In this case the notification can be missed.
If this happens during a dev_change_net_namespace this can result in the
netdevice to be moved to the new namespace while the packet_sock in the
old namespace still holds a reference on it. When the netdevice is later
deleted in the new namespace the deletion hangs since the packet_sock
is not found in the new namespace' &net->packet.sklist.
It can be reproduced with the script below.
This patch makes packet_do_bind check again for the presence of the
netdevice in the packet_sock's namespace after the synchronize_net
in unregister_prot_hook.
More in general it also uses the rcu lock for the duration of the bind
to stop dev_change_net_namespace/rollback_registered_many from
going past the synchronize_net following unlist_netdevice, so that
no NETDEV_UNREGISTER notifications can happen on the new netdevice
while the bind is executing. In order to do this some code from
packet_bind{_spkt} is consolidated into packet_do_dev.
import socket, os, time, sys
proto=7
realDev='em1'
vlanId=400
if len(sys.argv) > 1:
vlanId=int(sys.argv[1])
dev='vlan%d' % vlanId
os.system('taskset -p 0x10 %d' % os.getpid())
s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto)
os.system('ip link add link %s name %s type vlan id %d' %
(realDev, dev, vlanId))
os.system('ip netns add dummy')
pid=os.fork()
if pid == 0:
# dev should be moved while packet_do_bind is in synchronize net
os.system('taskset -p 0x20000 %d' % os.getpid())
os.system('ip link set %s netns dummy' % dev)
os.system('ip netns exec dummy ip link del %s' % dev)
s.close()
sys.exit(0)
time.sleep(.004)
try:
s.bind(('%s' % dev, proto+1))
except:
print 'Could not bind socket'
s.close()
os.system('ip netns del dummy')
sys.exit(0)
os.waitpid(pid, 0)
s.close()
os.system('ip netns del dummy')
sys.exit(0)
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
sit0 device allocates its percpu storage twice :
- One time in ipip6_tunnel_init()
- One time in ipip6_fb_tunnel_init()
Thus we leak 48 bytes per possible cpu per network namespace dismantle.
ipip6_fb_tunnel_init() can be much simpler and does not
return an error, and should be called after register_netdev()
Note that ipip6_tunnel_clone_6rd() also needs to be called
after register_netdev() (calling ipip6_tunnel_init())
Fixes: ebe084aafb7e ("sit: Use ipip6_tunnel_init as the ndo_init function.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The lt4112 is a HP branded Huawei me906e modem. Like other Huawei
modems, it does not have a fixed interface to function mapping.
Instead it uses a Huawei specific scheme: functions are mapped by
subclass and protocol.
However, the HP vendor ID is used for modems from many different
manufacturers using different schemes, so we cannot apply a generic
vendor rule like we do for the Huawei vendor ID.
Replace the previous lt4112 entry pointing to an arbitrary interface
number with a device specific subclass + protocol match.
Reported-and-tested-by: Muri Nicanor <muri+libqmi@immerda.ch> Tested-by: Martin Hauke <mardnh@gmx.de> Fixes: bb2bdeb83fb1 ("qmi_wwan: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This is an HP-branded Sierra Wireless EM7355:
https://bugzilla.redhat.com/show_bug.cgi?id=1223646#c2
Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Ani Sinha <ani@arista.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
priv->hwts_*_en indicate if timestamping is enabled/disabled at run
time. But priv->dma_cap.time_stamp and priv->dma_cap.atime_stamp
indicates HW is support for PTPv1/PTPv2.
Signed-off-by: Phil Reid <preid@electromag.com.au> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Either of pskb_pull() or pskb_trim() may fail under low memory conditions.
If rds_tcp_data_recv() ignores such failures, the application will
receive corrupted data because the skb has not been correctly
carved to the RDS datagram size.
Avoid this by handling pskb_pull/pskb_trim failure in the same
manner as the skb_clone failure: bail out of rds_tcp_data_recv(), and
retry via the deferred call to rds_send_worker() that gets set up on
ENOMEM from rds_tcp_read_sock()
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
We don't have fraglist support in TAP_FEATURES. This will lead
software segmentation of gro skb with frag list. Fixes by having
frag list support in TAP_FEATURES.
With this patch single session of netperf receiving were restored from
about 5Gb/s to about 12Gb/s on mlx4.
Fixes a567dd6252 ("macvtap: simplify usage of tap_features") Cc: Vlad Yasevich <vyasevic@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This is decrementing the pointer, instead of the value stored in the
pointer. KASan detects it as an out of bounds reference.
Reported-by: "Berry Cheng 程君(成淼)" <chengmiao.cj@alibaba-inc.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
These functions check should_resched() before unlocking spinlock/bh-enable:
preempt_count always non-zero => should_resched() always returns false.
cond_resched_lock() worked iff spin_needbreak is set.
This patch adds argument "preempt_offset" to should_resched().
preempt_count offset constants for that:
PREEMPT_DISABLE_OFFSET - offset after preempt_disable()
PREEMPT_LOCK_OFFSET - offset after spin_lock()
SOFTIRQ_DISABLE_OFFSET - offset after local_bh_distable()
SOFTIRQ_LOCK_OFFSET - offset after spin_lock_bh()
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Graf <agraf@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: bdb438065890 ("sched: Extract the basic add/sub preempt_count modifiers") Link: http://lkml.kernel.org/r/20150715095204.12246.98268.stgit@buzz Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ luis: backported to 3.16:
- some of the changes done in preempt_mask.h instead of preempt.h
- adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
"CHECK" suggests it's only used as a comparison mask. But now it's used
further as a config-conditional preempt disabler offset. Lets
disambiguate this name.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1431441711-29753-4-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ luis: backported to 3.16:
- file rename: include/linux/{preempt.h} -> {preempt_mask.h} ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
drivers/net/ethernet/sfc/selftest.c: In function ‘efx_iterate_state’:
drivers/net/ethernet/sfc/selftest.c:388:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers]
This is because the msg[] member of struct efx_loopback_payload
is marked as 'const'. Remove that.
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
In file included from include/linux/printk.h:261:0,
from include/linux/kernel.h:13,
from include/linux/list.h:8,
from include/linux/module.h:9,
from drivers/power/bq24190_charger.c:11:
drivers/power/bq24190_charger.c: In function ‘bq24190_irq_handler_thread’:
include/linux/dynamic_debug.h:86:20: warning: ‘ss_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized]
__dynamic_dev_dbg(&descriptor, dev, fmt, \
^
drivers/power/bq24190_charger.c:1211:5: note: ‘ss_reg’ was declared here
u8 ss_reg, f_reg;
^
In file included from include/linux/printk.h:261:0,
from include/linux/kernel.h:13,
from include/linux/list.h:8,
from include/linux/module.h:9,
from drivers/power/bq24190_charger.c:11:
include/linux/dynamic_debug.h:86:20: warning: ‘f_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized]
__dynamic_dev_dbg(&descriptor, dev, fmt, \
^
drivers/power/bq24190_charger.c:1211:13: note: ‘f_reg’ was declared here
u8 ss_reg, f_reg;
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The dgnc_mgmt_ioctl() code fails to initialize the 16 _reserved bytes of
struct digi_dinfo after the ->dinfo_nboards member. Add an explicit
memset(0) before filling the structure to avoid the info leak.
Signed-off-by: Salva Peiró <speirofr@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Moritz Mühlenhoff <jmm@inutil.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Currently slhc_init() treats out-of-range values of rslots and tslots
as equivalent to 0, except that if tslots is too large it will
dereference a null pointer (CVE-2015-7799).
Add a range-check at the top of the function and make it return an
ERR_PTR() on error instead of NULL. Change the callers accordingly.
Compile-tested only.
Reported-by: 郭永刚 <guoyonggang@360.cn>
References: http://article.gmane.org/gmane.comp.security.oss.general/17908 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Moritz Mühlenhoff <jmm@inutil.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Moritz Mühlenhoff <jmm@inutil.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The internal clock of the master chip, which is usually 125MHz, is only half
(62.5MHz) for the slave chips. So we have to adjust the uartclk for all the
slave ports. Therefor we add a new function to determine if a slave chip is
present and update pci_xr17v35x_setup accordingly.
The Exar XR17V358 can also be combined with a XR17V354 chip to act as a
single 12 port chip. This works the same way as the combining two XR17V358
chips. But the reported device id then is 0x4358.
The Exar XR17V358 chip usually provides only 8 ports. But two chips can be
combined to act as a single 16 port chip. Therefor one chip is configured
as master the second as slave by connecting the mode pin to VCC (master)
or GND (slave).
Then the master chip is reporting a different device-id depending on
whether a slave is detected or not. The UARTs 8-15 are addressed from
0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to
address all 16 ports as before.
When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.
If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.
When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure. This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).
However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct. This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa249ae
"net/mlx4_core: Enable CQE/EQE stride support".
Fixes: 08ff32352d6f ('mlx4: 64-byte CQE/EQE support') Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
gre_gso_segment() chokes if SIT frames were aggregated by GRO engine.
Fixes: 61c1db7fae21e ("ipv6: sit: add GSO/TSO support") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
We can't rely on PPPOX_ZOMBIE to decide whether to clear po->pppoe_dev.
PPPOX_ZOMBIE can be set by pppoe_disc_rcv() even when po->pppoe_dev is
NULL. So we have no guarantee that (sk->sk_state & PPPOX_ZOMBIE) implies
(po->pppoe_dev != NULL).
Since we're releasing a PPPoE socket, we want to release the pppoe_dev
if it exists and reset sk_state to PPPOX_DEAD, no matter the previous
value of sk_state. So we can just check for po->pppoe_dev and avoid any
assumption on sk->sk_state.
Fixes: 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The IPv6 IPsec pre-encap path performs fragmentation for tunnel-mode
packets. That is, we perform fragmentation pre-encap rather than
post-encap.
A check was added later to ensure that proper MTU information is
passed back for locally generated traffic. Unfortunately this
check was performed on all IPsec packets, including transport-mode
packets.
What's more, the check failed to take GSO into account.
The end result is that transport-mode GSO packets get dropped at
the check.
This patch fixes it by moving the tunnel mode check forward as well
as adding the GSO check.
Fixes: dd767856a36e ("xfrm6: Don't call icmpv6_send on local error") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This commit is poorly justified, I can find not discusison in email,
and it clearly causes a problem.
If a device which is being recovered fails and is subsequently
re-added to an array, there could easily have been changes to the
array *before* the point where the recovery was up to. So the
recovery must start again from the beginning.
If a spare is being recovered and fails, then when it is re-added we
really should do a bitmap-based recovery up to the recovery-offset,
and then a full recovery from there. Before this reversion, we only
did the "full recovery from there" which is not corect. After this
reversion with will do a full recovery from the start, which is safer
but not ideal.
It will be left to a future patch to arrange the two different styles
of recovery.
Reported-and-tested-by: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: NeilBrown <neilb@suse.com> Fixes: 7eb418851f32 ("md: allow a partially recovered device to be hot-added to an array.") Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
After commit 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()")
__find_stripe() is called under conf->hash_locks + hash.
But handle_stripe_clean_event() calls remove_hash() under
conf->device_lock.
Under some cirscumstances the hash chain can be circuited,
and we get an infinite loop with disabled interrupts and locked hash
lock in __find_stripe(). This leads to hard lockup on multiple CPUs
and following system crash.
I was able to reproduce this behavior on raid6 over 6 ssd disks.
The devices_handle_discard_safely option should be set to enable trim
support. The following script was used:
for i in `seq 1 32`; do
dd if=/dev/zero of=large$i bs=10M count=100 &
done
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Fixes: 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()") Signed-off-by: NeilBrown <neilb@suse.com> Cc: Shaohua Li <shli@kernel.org>
[ luis: backported to 3.16: used Roman's backport to 3.14 ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
rbd requires stable pages, as it performs a crc of the page data before
they are send to the OSDs.
But since kernel 3.9 (patch 1d1d1a767206fbe5d4c69493b7e6d2a8d08cc0a0
"mm: only enforce stable page writes if the backing device requires
it") it is not assumed anymore that block devices require stable pages.
This patch sets the necessary flag to get stable pages back for rbd.
In a ceph installation that provides multiple ext4 formatted rbd
devices "bad crc" messages appeared regularly (ca 1 message every 1-2
minutes on every OSD that provided the data for the rbd) in the
OSD-logs before this patch. After this patch this messages are pretty
much gone (only ca 1-2 / month / OSD).
Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de>
[idryomov@gmail.com: require stable pages only in crc case, changelog] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[idryomov@gmail.com: backport to 3.9-3.17: context] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
So that the bl encoder will be null if the GPU does not
control the backlight.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ luis: backported to 3.16:
- change radeon_link_encoder_connector() instead of
radeon_encoder_add_backlight() ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Instead of only enabling the backlight (which seems to set it to max
brightness), just re-set the current backlight level, which also takes
care of enabling the backlight if necessary.
Only the radeon_atom_encoder_dpms_dig part tested on a Kaveri laptop,
the radeon_atom_encoder_dpms_avivo part is only compile tested.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
With this patch applied, we were the only architecture making this sort
of adjustment to the PC calculation in the unwinder. This causes
problems for ftrace, where the PC values are matched against the
contents of the stack frames in the callchain and fail to match any
records after the address adjustment.
Whilst there has been some effort to change ftrace to workaround this,
those patches are not yet ready for mainline and, since we're the odd
architecture in this regard, let's just step in line with other
architectures (like arch/arm/) for now.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
When pci_pool_alloc fails in mvs_task_prep then task->lldd_task stays
NULL but it's later used in mvs_abort_task as slot which is passed
to mvs_slot_task_free causing NULL pointer dereference.
Just return from mvs_slot_task_free when passed with NULL slot.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101891 Signed-off-by: Dāvis Mosāns <davispuh@gmail.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Commit 00d8689b85a7 ("i2c: mv64xxx: rework offload support to fix
several problems") completely reworked the offload support, but left a
debugging-related "return false" at the beginning of the
mv64xxx_i2c_can_offload() function. This has the unfortunate consequence
that offloading is in fact never used, which wasn't really the
intention.
This commit fixes that problem by removing the bogus "return false".
Fixes: 00d8689b85a7 ("i2c: mv64xxx: rework offload support to fix several problems") Signed-off-by: Hezi Shahmoon <hezi@marvell.com>
[Thomas: reworked commit log and title.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
During device assignment/deassignment the flags in the DTE
get lost, which might cause spurious faults, for example
when the device tries to access the system management range.
Fix this by not clearing the flags with the rest of the DTE.
Reported-by: G. Richard Bellamy <rbellamy@pteradigm.com> Tested-by: G. Richard Bellamy <rbellamy@pteradigm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.
Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md") Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b
which changed the return value of submit_bio_wait() to return != 0 on
error, but didn't update the caller accordingly.
Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md") Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Currently a number of Crypto API operations may fail when a signal
occurs. This causes nasty problems as the caller of those operations
are often not in a good position to restart the operation.
In fact there is currently no need for those operations to be
interrupted by user signals at all. All we need is for them to
be killable.
This patch replaces the relevant calls of signal_pending with
fatal_signal_pending, and wait_for_completion_interruptible with
wait_for_completion_killable, respectively.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Laura Abbott <labbott@redhat.com> produced a patch which lead us to
inspect symbol_put_addr(). This function has a comment claiming it
doesn't need to disable preemption around the module lookup
because it holds a reference to the module it wants to find, which
therefore cannot go away.
This is wrong (and a false optimization too, preempt_disable() is really
rather cheap, and I doubt any of this is on uber critical paths,
otherwise it would've retained a pointer to the actual module anyway and
avoided the second lookup).
While its true that the module cannot go away while we hold a reference
on it, the data structure we do the lookup in very much _CAN_ change
while we do the lookup. Therefore fix the comment and add the
required preempt_disable().
Reported-by: poma <pomidorabelisima@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Fixes: a6e6abd575fc ("module: remove module_text_address()") Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
During the CT-kill exit flow, the card is powered up and partially
initialized to check if the temperature is already low enough.
Unfortunately the init bails early because the CT-kill flag is set.
Make the code bail early only for HW RF-kill, as was intended by the
author. CT-kill is self-imposed and is not really RF-kill.
Fixes: 31b8b343e019 ("iwlwifi: fix RFkill while calibrating") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
ib_send_cm_sidr_rep could sometimes erase the node from the sidr
(depending on errors in the process). Since ib_send_cm_sidr_rep is
called both from cm_sidr_req_handler and cm_destroy_id, cm_id_priv
could be either erased from the rb_tree twice or not erased at all.
Fixing that by making sure it's erased only once before freeing
cm_id_priv.
Fixes: a977049dacde ('[PATCH] IB: Add the kernel CM implementation') Signed-off-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
btree_split_beneath()'s error path had an outstanding FIXME that speaks
directly to the potential for _not_ cleaning up a previously allocated
bufio-backed block.
Fix this by releasing the previously allocated bufio block using
unlock_block().
Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Commit 4c7e309340ff ("dm btree remove: fix bug in redistribute3") wasn't
a complete fix for redistribute3().
The redistribute3 function takes 3 btree nodes and shares out the entries
evenly between them. If the three nodes in total contained
(MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting
rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in
the center.
Fix this issue by being more careful about calculating the target number
of entries for the left and right nodes.
Unit tested in userspace using this program:
https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.c
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Mapping an image with a long parent chain (e.g. image foo, whose parent
is bar, whose parent is baz, etc) currently leads to a kernel stack
overflow, due to the following recursion in the reply path:
Currently we leak parent_spec and trigger a "parent reference
underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails.
The problem is we take the !parent out_err branch and that only drops
refcounts; parent_spec that would've been freed had we called
rbd_dev_unparent() remains and triggers rbd_warn() in
rbd_dev_parent_put() - at that point we have parent_spec != NULL and
parent_ref == 0, so counter ends up being -1 after the decrement.
Redo rbd_dev_probe_parent() to fix this.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
[idryomov@gmail.com: backport to < 4.2: rbd_dev->opts] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Now you should not ask kernel to do a stupid stuff like copying 256MB in
2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin
should have a way to stop you.
We actually do have a check for fatal_signal_pending() in
generic_perform_write() which triggers in this path however because we
always succeed in writing something before the check is done, we return
value > 0 from generic_perform_write() and thus the information about
signal gets lost.
Fix the problem by doing the signal check before writing anything. That
way generic_perform_write() returns -EINTR, the error gets propagated up
and the sendfile loop terminates early.
Signed-off-by: Jan Kara <jack@suse.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Currently we do not validate rtas.entry before calling enter_rtas(). This
leads to a kernel oops when user space calls rtas system call on a powernv
platform (see below). This patch adds code to validate rtas.entry before
making enter_rtas() call.
On nv50+, we restrict the valid domains to just the one where the buffer
was originally created. However after the buffer is evicted to system
memory, we might move it back to a different domain that was not
originally valid. When sharing the buffer and retrieving its GEM_INFO
data, we still want the domain that will be valid for this buffer in a
pushbuf, not the one where it currently happens to be.
This resolves fdo#92504 and several others. These are due to suspend
evicting all buffers, making it more likely that they temporarily end up
in the wrong place.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
There are 24 EQ registers not 25, I suspect this bug came about because
the registers start at EQ1 not zero. The bug is relatively harmless as
the extra register written is an unused one.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
We received several reports of systems rebooting and powering on
after an attempted shutdown. Testing showed that setting
XHCI_SPURIOUS_WAKEUP quirk in addition to the XHCI_SPURIOUS_REBOOT
quirk allowed the system to shutdown as expected for LynxPoint-LP
xHCI controllers. Set the quirk back.
Note that the quirk was originally introduced for LynxPoint and
LynxPoint-LP just for this same reason. See:
commit 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")
It was later limited to only concern HP machines as it caused
regression on some machines, see both bug and commit:
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66171
commit 6962d914f317 ("xhci: Limit the spurious wakeup fix only to HP machines")
Later it was discovered that the powering on after shutdown
was limited to LynxPoint-LP (Haswell-ULT) and that some non-LP HP
machine suffered from spontaneous resume from S3 (which should
not be related to the SPURIOUS_WAKEUP quirk at all). An attempt
to fix this then removed the SPURIOUS_WAKEUP flag usage completely.
commit b45abacde3d5 ("xhci: no switching back on non-ULT Haswell")
Current understanding is that LynxPoint-LP (Haswell ULT) machines
need the SPURIOUS_WAKEUP quirk, otherwise they will restart, and
plain Lynxpoint (Haswell) machines may _not_ have the quirk
set otherwise they again will restart.
Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Oliver Neukum <oneukum@suse.com>
[Added more history to commit message -Mathias] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
If a host fails to wake up a isochronous SuperSpeed device from U1/U2
in time for a isoch transfer it will generate a "No ping response error"
Host will then move to the next transfer descriptor.
Handle this case in the same way as missed service errors, tag the
current TD as skipped and handle it on the next transfer event.
If the difference is big enough between the bytes asked and received
in a bulk transfer we can get a short transfer event pointing to a TRB in
the middle of the TD. We don't want to handle the TD yet as we will anyway
receive a new event for the last TRB in the TD.
Hold off from finishing the TD and removing it from the list until we
receive an event for the last TRB in the TD
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
SX_TLV controls are intended for situations where the register behind
the control has some non-zero value indicating the minimum gain
and then gains increasing from there and eventually overflowing through
zero.
Currently every CODEC implementing these controls specifies the minimum
as the non-zero value for the minimum and the maximum as the number of
gain settings available.
This means when the info callback subtracts the minimum value from the
maximum value to calculate the number of gain levels available it is
actually under reporting the available levels. This patch fixes this
issue by adding a new snd_soc_info_volsw_sx callback that does not
subtract the minimum value.
Fixes: 1d99f2436d0d ("ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV") Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Tested-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
[ luis: backported to 3.16:
- file rename: sound/soc/soc-ops.c -> sound/soc/soc-core.c ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
When multiple GOP devices exists, but none of them implements
ConOut, the code should just choose the first GOP (according to
the comments). But currently 'fb_base' will refer to the last GOP,
while other parameters to the first GOP, which will likely
result in a garbled display.
I can reliably reproduce this bug using my ASRock Z87M Extreme4
motherboard with CSM and integrated GPU disabled, and two PCIe
video cards (NVidia GT640 and GTX980), booting from efi-stub
(booting from grub works fine). On the primary display the
ASRock logo remains and on the secondary screen it is garbled
up completely.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1444659236-24837-2-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Pinning a userptr onto the hardware raises interesting questions about
the lifetime of such a surface as the framebuffer extends that life
beyond the client's address space. That is the hardware will need to
keep scanning out from the backing storage even after the client wants
to remap its address space. As the hardware pins the backing storage,
the userptr becomes invalid and this raises a WARN when the clients
tries to unmap its address space. The situation can be even more
complicated when the buffer is passed between processes, between a
client and display server, where the lifetime and hardware access is
even more confusing. Deny it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
0° Kelvin is actually −273.15°C, not -272.15°C. Fix the temperature offset.
Also improve the comment explaining the calculation.
Reported-by: Janusz Użycki <j.uzycki@elpromaelectronics.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
xen-blkfront will crash if the check to talk_to_blkback()
in blkback_changed()(XenbusStateInitWait) returns an error.
The driver data is freed and info is set to NULL. Later during
the close process via talk_to_blkback's call to xenbus_dev_fatal()
the null pointer is passed to and dereference in blkfront_closing.
Signed-off-by: Cathy Avery <cathy.avery@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
DSA expects the host_dev pointer to be the device structure associated
with the MDIO bus controller driver. First commit breaking that was c3a07134e6aa ("mv643xx_eth: convert to use the Marvell Orion MDIO
driver"), and then, it got completely under the radar for a while.
Reported-by: Frans van de Wiel <fvdw@fvdw.eu> Fixes: c3a07134e6aa ("mv643xx_eth: convert to use the Marvell Orion MDIO driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The MODULE_FIRMWARE() for 3160 should be using the 7260 version as
it's done in the device configuration struct instead of referencing
IWL3160_UCODE_API_OK which doesn't even exist.
Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The code to send the RX PN data (for each TID) to the firmware
has a devastating bug: it overwrites the data for TID 0 with
all the TID data, leaving the remaining TIDs zeroed. This will
allow replays to actually be accepted by the firmware, which
could allow waking up the system.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The code to send the RX PN data (for each TID) to the firmware
has a devastating bug: it overwrites the data for TID 0 with
all the TID data, leaving the remaining TIDs zeroed. This will
allow replays to actually be accepted by the firmware, which
could allow waking up the system.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
"num_read" is in byte units but we are write u16s so we end up write
twice as much as intended.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
ath9k inserts padding between the 802.11 header and the data area (to
align it). Since it didn't declare this extra required headroom, this
led to some nasty issues like randomly dropped packets in some setups.
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name
is freed twice: once in rbd_dev_probe_parent() and then in its caller
rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to
handle parent images).
rbd_dev_probe_parent() is responsible for probing the parent, so it
shouldn't muck with clone's fields.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This commit checks for the URB_ZERO_PACKET flag and creates an extra
zero-length td if the urb transfer length is a multiple of the endpoint's
max packet length.
I've done some extensive history digging across libdrm, mesa and
xf86-video-{intel,nouveau,ati}. The only potential user of this with
kms drivers I could find was ttmtest, which once used drmGetLock
still. But that mistake was quickly fixed up. Even the intel xvmc
library (which otherwise was really good with using dri1 stuff in kms
mode) managed to never take the hw lock for dri2 (and hence kms).
Hence it should be save to unconditionally disallow this.
Cc: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Peter Antoine <peter.antoine@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Commit 8eb934591f8b ("btrfs: check unsupported filters in balance
arguments") adds a jump to exit label out_bargs in case the argument
check fails. At this point in addition to the bargs memory, the
memory for struct btrfs_balance_control has already been allocated.
Ownership of bctl is passed to btrfs_balance() in the good case,
thus the memory is not freed due to the introduced jump. Make sure
that the memory gets freed in any case as necessary. Detected by
Coverity CID 1328378.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
ACPI SSCN/FMCN methods were originally added because then the platform can
provide the most accurate HCNT/LCNT values to the driver. However, this
seems not to be true for Dell Inspiron 7348 where using these causes the
touchpad to fail in boot:
i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
i2c_designware INT3433:00: controller timed out
The values received from ACPI are (in fast mode):
HCNT: 72
LCNT: 160
this translates to following timings (input clock is 100MHz on Broadwell):
tHIGH: 720 ns (spec min 600 ns)
tLOW: 1600 ns (spec min 1300 ns)
Bus period: 2920 ns (assuming 300 ns tf and tr)
Bus speed: 342.5 kHz
Both tHIGH and tLOW are within the I2C specification.
The calculated values when ACPI parameters are not used are (in fast mode):
HCNT: 87
LCNT: 159
which translates to:
tHIGH: 870 ns (spec min 600 ns)
tLOW: 1590 ns (spec min 1300 ns)
Bus period 3060 ns (assuming 300 ns tf and tr)
Bus speed 326.8 kHz
These values are also within the I2C specification.
Since both ACPI and calculated values meet the I2C specification timing
requirements it is hard to say why the touchpad does not function properly
with the ACPI values except that the bus speed is higher in this case (but
still well below the max 400kHz).
Solve this by adding DMI quirk to the driver that disables using ACPI
parameters on this particulare machine.
Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The core may register clients attached to this master which may use
funtionality from the master. So, RuntimePM must be enabled before, otherwise
this will fail.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
projects / thirdparty / kernel / stable.git / log
