KCSAN reported a data-race when accessing node->ref.
Although node->ref does not have to be accurate,
take this chance to use a more common READ_ONCE() and WRITE_ONCE()
pattern instead of data_race().
There is an existing bpf_lru_node_is_ref() and bpf_lru_node_set_ref().
This patch also adds bpf_lru_node_clear_ref() to do the
WRITE_ONCE(node->ref, 0) also.
==================================================================
BUG: KCSAN: data-race in __bpf_lru_list_rotate / __htab_lru_percpu_map_update_elem
read to 0xffff888137038deb of 1 bytes by task 11241 on cpu 0:
bpf_lru_node_set_ref kernel/bpf/bpf_lru_list.h:70 [inline]
__htab_lru_percpu_map_update_elem+0x2f1/0x820 kernel/bpf/hashtab.c:1332
bpf_percpu_hash_update+0x5e/0x90 kernel/bpf/hashtab.c:2313
bpf_map_update_value+0x2a9/0x370 kernel/bpf/syscall.c:200
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1687
bpf_map_do_batch+0x2d9/0x3d0 kernel/bpf/syscall.c:4534
__sys_bpf+0x338/0x810
__do_sys_bpf kernel/bpf/syscall.c:5096 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5094 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5094
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x01 -> 0x00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 11241 Comm: syz-executor.3 Not tainted 6.3.0-rc7-syzkaller-00136-g6a66fdd29ea1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
==================================================================
Reported-by: syzbot+ebe648a84e8784763f82@syzkaller.appspotmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20230511043748.1384166-1-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Further investigation shows that the warning is superfluous, the migration
disabled task is just going to be migrated to its current running CPU.
This is because that on load balance if the dst_cpu is not allowed by the
task, we'll re-select a new_dst_cpu as a candidate. If no task can be
balanced to dst_cpu we'll try to balance the task to the new_dst_cpu
instead. In this case when the migration disabled task is not on CPU it
only allows to run on its current CPU, load balance will select its
current CPU as new_dst_cpu and later triggers the warning above.
The new_dst_cpu is chosen from the env->dst_grpmask. Currently it
contains CPUs in sched_group_span() and if we have overlapped groups it's
possible to run into this case. This patch makes env->dst_grpmask of
group_balance_mask() which exclude any CPUs from the busiest group and
solve the issue. For balancing in a domain with no overlapped groups
the behaviour keeps same as before.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20230530082507.10444-1-yangyicong@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Both create_mapping_noalloc() and update_mapping_prot() sanity-check
their 'virt' parameter, but the check itself doesn't make much sense.
The condition used today appears to be a historical accident.
The sanity-check condition:
if ((virt >= PAGE_END) && (virt < VMALLOC_START)) {
[ ... warning here ... ]
return;
}
... can only be true for the KASAN shadow region or the module region,
and there's no reason to exclude these specifically for creating and
updateing mappings.
When arm64 support was first upstreamed in commit:
if ((virt >= VA_START) && (virt < VMALLOC_START)) {
[ ... warning here ... ]
return;
}
This appear to have been a thinko. The commit moved the linear map to
the bottom of the kernel address space, with VMALLOC_START being at the
halfway point. The old condition would warn for changes to the linear
map below this, and at the time VA_START was the end of the linear map.
Subsequently we cleaned up the naming of VA_START in commit:
if ((virt >= PAGE_END) && (virt < VMALLOC_START)) {
[ ... warning here ... ]
return;
}
Correct the condition to check against the start of the TTBR1 address
space, which is currently PAGE_OFFSET. This simplifies the logic, and
more clearly matches the "outside kernel range" message in the warning.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20230615102628.1052103-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
filter_irq_stacks() is supposed to cut entries which are related irq entries
from its call stack.
And in_irqentry_text() which is called by filter_irq_stacks()
uses __irqentry_text_start/end symbol to find irq entries in callstack.
But it doesn't work correctly as without "CONFIG_FUNCTION_GRAPH_TRACER",
arm64 kernel doesn't include gic_handle_irq which is entry point of arm64 irq
between __irqentry_text_start and __irqentry_text_end as we discussed in below link.
https://lore.kernel.org/all/CACT4Y+aReMGLYua2rCLHgFpS9io5cZC04Q8GLs-uNmrn1ezxYQ@mail.gmail.com/#t
This problem can makes unintentional deep call stack entries especially
in KASAN enabled situation as below.
Linux defaults to picking the non-working ACPI video backlight interface
on the Lenovo ThinkPad X131e (3371 AMD version).
Add a DMI quirk to pick the working native radeon_bl0 interface instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The LID0 device on the Nextbook Ares 8A tablet always reports lid
closed causing userspace to suspend the device as soon as booting
is complete.
Add a DMI quirk to disable the broken lid functionality.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Comparing purely software implementation (ref), current outdated
accelerated using crc32q instruction (NI), optimized implementations by
M. Adler (https://stackoverflow.com/questions/17645167/implementing-sse-4-2s-crc32c-in-software/17646775#17646775)
and the best one that was taken from kernel using the PCLMULQDQ
instruction (PCL).
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
posix_timer_add() tries to allocate a posix timer ID by starting from the
cached ID which was stored by the last successful allocation.
This is done in a loop searching the ID space for a free slot one by
one. The loop has to terminate when the search wrapped around to the
starting point.
But that's racy vs. establishing the starting point. That is read out
lockless, which leads to the following problem:
So CPU1 can observe a negative start value, i.e. -1, and the loop break
never happens because the condition can never be true:
if (sig->posix_timer_id == start)
break;
While this is unlikely to ever turn into an endless loop as the ID space is
huge (INT_MAX), the racy read of the start value caught the attention of
KCSAN and Dmitry unearthed that incorrectness.
Rewrite it so that all id operations are under the hash lock.
Currently, there is no limit for raid1/raid10 plugged bio. While flushing
writes, raid1 has cond_resched() while raid10 doesn't, and too many
writes can cause soft lockup.
Follow up soft lockup can be triggered easily with writeback test for
raid10 with ramdisks:
Fix the problem by adding cond_resched() to raid10 like what raid1 did.
Note that unlimited plugged bio still need to be optimized, for example,
in the case of lots of dirty pages writeback, this will take lots of
memory and io will spend a long time in plug, hence io latency is bad.
If the index allocated by idr_alloc greater than MINORMASK >> part_shift,
the device number will overflow, resulting in failure to create a block
device.
After initial start-up, the driver triggers ATI (calibration) with
the newly loaded register configuration in place. Next, the driver
polls a register field to ensure ATI completed in a timely fashion
and that the device is ready to sense.
However, communicating with the device over I2C while ATI is under-
way may induce noise in the device and cause ATI to fail. As such,
the vendor recommends not to poll the device during ATI.
To solve this problem, let the device naturally signal to the host
that ATI is complete by way of an interrupt. A completion prevents
the device from successfully probing until this happens.
As an added benefit, initial switch states are now reported in the
interrupt handler at the same time ATI status is checked. As such,
duplicate code that reports initial switch states has been removed
from iqs269_input_init().
The former logic that scaled ATI timeout and filter settling delay
is not carried forward with the new implementation, as it produces
overly conservative delays at the lower clock rate.
Rather, a single timeout that covers both clock rates is used. The
filter settling delay does not happen to be necessary and has been
removed as well.
Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/Y7RtB2T7AF9rYMjK@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Polling the device while it transitions from automatic to manual
power mode switching may keep the device from actually finishing
the transition. The process appears to time out depending on the
polling rate and the device's core clock frequency.
This is ultimately unnecessary in the first place; instead it is
sufficient to write the desired mode during initialization, then
disable automatic switching at suspend. This eliminates the need
to ensure the device is prepared for a manual change and removes
the 'suspend_mode' variable.
Similarly, polling the device while it transitions from one mode
to another under manual control may time out as well. This added
step does not appear to be necessary either, so drop it.
Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/Y7Rs+eEXlRw4Vq57@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings. The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-9-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: 18ab69c8ca56 ("Input: iqs269a - do not poll during suspend or resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
Keep this macro in line with the other ones. This makes it possible to
use them in the cases where the underlying dev_pm_ops structure is
exported.
Restore the "static" qualifier in the two drivers where the
DEFINE_SIMPLE_DEV_PM_OPS macro was used.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 18ab69c8ca56 ("Input: iqs269a - do not poll during suspend or resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
Use DEFINE_SIMPLE_DEV_PM_OPS() instead of the SIMPLE_DEV_PM_OPS()
macro, along with using pm_sleep_ptr() as this driver doesn't handle
runtime PM.
This makes it possible to remove the #ifdef CONFIG_PM guard around
the suspend/resume functions.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 18ab69c8ca56 ("Input: iqs269a - do not poll during suspend or resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
- Use DEFINE_SIMPLE_DEV_PM_OPS() instead of the SIMPLE_DEV_PM_OPS()
macro. This makes it possible to remove the __maybe_unused flags
on the callback functions.
- Since we only have callbacks for suspend/resume, we can conditionally
compile the dev_pm_ops structure for when CONFIG_PM_SLEEP is enabled;
so use the pm_sleep_ptr() macro instead of pm_ptr().
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 18ab69c8ca56 ("Input: iqs269a - do not poll during suspend or resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
These new macros are very similar to their SET_*_PM_OPS() equivalent.
They however differ in the fact that the callbacks they set will always
be seen as referenced by the compiler. This means that the callback
functions don't need to be wrapped with a #ifdef CONFIG_PM guard, or
tagged with __maybe_unused, to prevent the compiler from complaining
about unused static symbols. The compiler will then simply evaluate at
compile time whether or not these symbols are dead code.
The callbacks that are only useful with CONFIG_PM_SLEEP is enabled, are
now also wrapped with a new pm_sleep_ptr() macro, which is inspired from
pm_ptr(). This is needed for drivers that use different callbacks for
sleep and runtime PM, to handle the case where CONFIG_PM is set and
CONFIG_PM_SLEEP is not.
These macros are similar to the functions they were created to replace,
with the following differences:
- They use the new macros introduced above, and as such always
reference the provided callback functions.
- They are not tagged with __maybe_unused. They are meant to be used
with pm_ptr() or pm_sleep_ptr() for DEFINE_UNIVERSAL_DEV_PM_OPS()
and DEFINE_SIMPLE_DEV_PM_OPS() respectively.
- They declare the symbol static, since every driver seems to do that
anyway; and if a non-static use-case is needed an indirection pointer
could be used.
The point of this change, is to progressively switch from a code model
where PM callbacks are all protected behind CONFIG_PM guards, to a code
model where the PM callbacks are always seen by the compiler, but
discarded if not used.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 18ab69c8ca56 ("Input: iqs269a - do not poll during suspend or resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
The pm_ptr() macro was previously conditionally defined, according to
the value of the CONFIG_PM option. This meant that the pointed structure
was either referenced (if CONFIG_PM was set), or never referenced (if
CONFIG_PM was not set), causing it to be detected as unused by the
compiler.
This worked fine, but required the __maybe_unused compiler attribute to
be used to every symbol pointed to by a pointer wrapped with pm_ptr().
We can do better. With this change, the pm_ptr() is now defined the
same, independently of the value of CONFIG_PM. It now uses the (?:)
ternary operator to conditionally resolve to its argument. Since the
condition is known at compile time, the compiler will then choose to
discard the unused symbols, which won't need to be tagged with
__maybe_unused anymore.
This pm_ptr() macro is usually used with pointers to dev_pm_ops
structures created with SIMPLE_DEV_PM_OPS() or similar macros. These do
use a __maybe_unused flag, which is now useless with this change, so it
later can be removed. However in the meantime it causes no harm, and all
the drivers still compile fine with the new pm_ptr() macro.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 18ab69c8ca56 ("Input: iqs269a - do not poll during suspend or resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
When a PCI error is encountered 6th time in an hour we
set the channel state to perm_failure and notify the
driver about the permanent failure.
However, after upstream commit 38ddc011478e ("powerpc/eeh:
Make permanently failed devices non-actionable"), EEH handler
stops calling any routine once the device is marked as
permanent failure. This issue can lead to fatal consequences
like kernel hang with certain PCI devices.
Following log is observed with lpfc driver, with and without
this change, Without this change kernel hangs, If PCI error
is encountered 6 times for a device in an hour.
Without the change
EEH: Beginning: 'error_detected(permanent failure)'
PCI 0132:60:00.0#600000: EEH: not actionable (1,1,1)
PCI 0132:60:00.1#600000: EEH: not actionable (1,1,1)
EEH: Finished:'error_detected(permanent failure)'
The control flow of eeh_handle_normal_event() is a bit tricky.
Break out one of the error handling paths - rather than be in an else
block, we'll make it part of the regular body of the function and put a
'goto out;' in the true limb of the if.
Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015070628.1331635-1-dja@axtens.net
Stable-dep-of: 9efcdaac36e1 ("powerpc/eeh: Set channel state after notifying the drivers") Signed-off-by: Sasha Levin <sashal@kernel.org>
4KB is the greatest alignment required by PAPR for such
buffers. rtas_data_buf used to have a __page_aligned attribute in the
arch/ppc64 days, but that was changed to __cacheline_aligned for
unknown reasons by commit 033ef338b6e0 ("powerpc: Merge rtas.c into
arch/powerpc/kernel"). That works out to 128-byte alignment
on ppc64, which isn't right.
This was found by inspection and I'm not aware of any real problems
caused by this. Either current RTAS implementations don't enforce the
alignment constraints, or rtas_data_buf is always being placed at a
4KB boundary by accident (or both, perhaps).
Use __aligned(SZ_4K) to ensure the rtas_data_buf has alignment
appropriate for all users.
At the time this was applied, EXPORT_SYMBOL_GPL() was very new, and
the exports of rtas_call() etc have remained non-GPL. As new APIs have
been added to the RTAS subsystem, their symbol exports have followed
the convention set by existing code.
However, the historical evidence is that RTAS function exports have been
added over time only to satisfy the needs of in-kernel users, and these
clients must have fairly intimate knowledge of how the APIs work to use
them safely. No out of tree users are known, and future ones seem
unlikely.
Arguably the default for RTAS symbols should have become
EXPORT_SYMBOL_GPL once it was available. Let's make it so now, and
exceptions can be evaluated as needed.
usb suspend clock has a gate shared with usb_root_clk.
Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Cc: stable@vger.kernel.org # v5.19+ Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1664549663-20364-1-git-send-email-jun.li@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
clkout1 and clkout2 allow to supply clocks from the SoC to the board,
which is used by some board designs to provide reference clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220427162131.3127303-1-l.stach@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Stable-dep-of: 5c1f7f109094 ("dt-bindings: clocks: imx8mp: Add ID for usb suspend clock") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add pixel clock for second LCDIFv3 interface. Both LCDIFv3 interfaces use
the same set of parent clock, so deduplicate imx8mp_media_disp1_pix_sels
into common imx8mp_media_disp_pix_sels and use it for both.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220313123949.207284-1-marex@denx.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Stable-dep-of: 5c1f7f109094 ("dt-bindings: clocks: imx8mp: Add ID for usb suspend clock") Signed-off-by: Sasha Levin <sashal@kernel.org>
When em485 init fails, there are two possible paths of entry:
1) uart_rs485_config (init path) that fully clears port->rs485 on
error.
2) ioctl path with a pre-existing, valid port->rs485 unto which the
kernel falls back on error and port->rs485 should therefore be
kept untouched. The temporary rs485 struct is not returned to
userspace in case of error so its flag don't matter.
...Thus SER_RS485_ENABLED clearing on error can/should be dropped.
Current DMC_DEBUG3(_MMIO(0x101090)) address is for TGL,
it is wrong for DG1. Just like commit 5bcc95ca382e
("drm/i915/dg1: Update DMC_DEBUG register"), correct
this issue for DG1 platform to avoid wrong register
being read.
If there's not enough free sections each of which consistis of large segments,
we can hit no free section for upcoming section allocation. Let's reclaim some
prefree segments by writing checkpoints.
Signed-off-by: Byungki Lee <dominicus79@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the build caused by the following changes:
- phys_addr_t is now defined in tools/include/linux/types.h
- dev_warn_once() is used in drivers/virtio/virtio_ring.c
- linux/uio.h included by vringh.h use INT_MAX defined in limits.h
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220705072249.7867-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
That don't result in any changes in the tables generated from that
header.
A table generator for setsockopt is needed, probably will be done in the
5.16 cycle.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: David S. Miller <davem@davemloft.net> Cc: Florian Westphal <fw@strlen.de> Cc: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
6b2a51ff03bf0c54 ("fscrypt: Add HCTR2 support for filename encryption")
That don't result in any changes in tooling, just causes this to be
rebuilt:
CC /tmp/build/perf-urgent/trace/beauty/sync_file_range.o
LD /tmp/build/perf-urgent/trace/beauty/perf-in.o
addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Huckleberry <nhuck@google.com> Link: https://lore.kernel.org/lkml/Yvzl8C7O1b+hf9GS@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no such trigger documented or implemented in Linux. It was a
copy & paste mistake.
This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'default-off' does not match '^cpu[0-9]*$'
'default-off' does not match '^hci[0-9]+-power$'
'default-off' does not match '^mmc[0-9]+$'
'default-off' does not match '^phy[0-9]+tx$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
fwnode_get_property_reference_args() may not be called with args argument
NULL on ACPI, OF already supports this. Add the missing NULL checks and
document this.
The purpose is to be able to count the references.
Fixes: 977d5ad39f3e ("ACPI: Convert ACPI reference args to generic fwnode reference args") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231109101010.1329587-2-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dgpu_disable attribute was not documented, this adds the
required documentation.
Fixes: 98829e84dc67 ("asus-wmi: Add dgpu disable method") Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20220812222509.292692-2-luke@ljones.dev Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
clk-provider.h:269: warning: Function parameter or member 'recalc_rate' not described in 'clk_ops'
clk-provider.h:468: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:468: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:482: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:482: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:687: warning: Function parameter or member 'flags' not described in 'clk_divider'
clk-provider.h:1164: warning: Function parameter or member 'flags' not described in 'clk_fractional_divider'
clk-provider.h:1164: warning: Function parameter or member 'approximation' not described in 'clk_fractional_divider'
clk-provider.h:1213: warning: Function parameter or member 'flags' not described in 'clk_multiplier'
Fixes: 9fba738a53dd ("clk: add duty cycle support") Fixes: b2476490ef11 ("clk: introduce the common clock framework") Fixes: 2d34f09e79c9 ("clk: fixed-rate: Add support for specifying parents via DT/pointers") Fixes: f5290d8e4f0c ("clk: asm9260: use parent index to link the reference clock") Fixes: 9d9f78ed9af0 ("clk: basic clock hardware types") Fixes: e2d0e90fae82 ("clk: new basic clk type for fractional divider") Fixes: f2e0a53271a4 ("clk: Add a basic multiplier clock") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230930221428.18463-1-rdunlap@infradead.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The siw_connect can go to err in below after cep is allocated successfully:
1. If siw_cm_alloc_work returns failure. In this case socket is not
assoicated with cep so siw_cep_put can't be called by siw_socket_disassoc.
We need to call siw_cep_put twice since cep->kref is increased once after
it was initialized.
2. If siw_cm_queue_work can't find a work, which means siw_cep_get is not
called in siw_cm_queue_work, so cep->kref is increased twice by siw_cep_get
and when associate socket with cep after it was initialized. So we need to
call siw_cep_put three times (one in siw_socket_disassoc).
3. siw_send_mpareqrep returns error, this scenario is similar as 2.
So we need to remove one siw_cep_put in the error path.
Such property simply doesn't exist (is not documented or used anywhere).
This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: usb@d000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede)
algorithms for performing authentication and encryption, respectively.
This causes the tests to fail when fips=1 is set, since these algorithms
are not allowed in FIPS mode. Therefore, switch from hmac(md5) and
cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant.
Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Magali Lemes <magali.lemes@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When neither LANTIQ nor MIPS_MALTA is set, 'physical_memsize' is not
declared. This causes the build to fail with:
mips-linux-ld: arch/mips/kernel/vpe-mt.o: in function `vpe_run':
arch/mips/kernel/vpe-mt.c:(.text.vpe_run+0x280): undefined reference to `physical_memsize'
LANTIQ is not using 'physical_memsize' and MIPS_MALTA's use of it is
self-contained in mti-malta/malta-dtshim.c.
Use of physical_memsize in vpe-mt.c appears to be unused, so eliminate
this loader mode completely and require VPE programs to be compiled with
DFLT_STACK_SIZE and DFLT_HEAP_SIZE defined.
Fixes: 9050d50e2244 ("MIPS: lantiq: Set physical_memsize") Fixes: 1a2a6d7e8816 ("MIPS: APRP: Split VPE loader into separate files.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202302030625.2g3E98sY-lkp@intel.com/ Cc: Dengcheng Zhu <dzhu@wavecomp.com> Cc: John Crispin <john@phrozen.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: "Steven J. Hill" <Steven.Hill@imgtec.com> Cc: Qais Yousef <Qais.Yousef@imgtec.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When MIPS_CPS=y, MIPS_CPS_PM is not set, HOTPLUG_CPU is not set, and
KEXEC=y, cps_shutdown_this_cpu() attempts to call cps_pm_enter_state(),
which is not built when MIPS_CPS_PM is not set.
Conditionally execute the else branch based on CONFIG_HOTPLUG_CPU
to remove the build error.
This build failure is from a randconfig file.
mips-linux-ld: arch/mips/kernel/smp-cps.o: in function `$L162':
smp-cps.c:(.text.cps_kexec_nonboot_cpu+0x31c): undefined reference to `cps_pm_enter_state'
Fixes: 1447864bee4c ("MIPS: kexec: CPS systems to halt nonboot CPUs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dengcheng Zhu <dzhu@wavecomp.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again. read_24x7_sys_info()
ignores this, allowing transient failures in reporting processor
module information.
Move the RTAS call into a coventional rtas_busy_delay()-based loop,
along with the parsing of results on success.
In the previous commits that added CLK_OPS_PARENT_ENABLE, support for
this flag was only added to rate change operations (rate setting and
reparent) and disabling unused subtree. It was not added to the
clock gate related operations. Any hardware driver that needs it for
these operations will either see bogus results, or worse, hang.
This has been seen on MT8192 and MT8195, where the imp_ii2_* clk
drivers set this, but dumping debugfs clk_summary would cause it
to hang.
Prepare parent on prepare and enable parent on enable dependencies are
already handled automatically by the core as part of its sequencing.
Whether the case for "enable parent on prepare" should be supported by
this flag or not is not clear, and thus ignored for now.
This change solely fixes the handling of clk_core_is_enabled, i.e.
enabling the parent clock when reading the hardware state. Unfortunately
clk_core_is_enabled is called in a variety of places, sometimes with
the enable clock already held. To avoid deadlocking, the core will
ignore readouts and just return false if CLK_OPS_PARENT_ENABLE is set
but the parent isn't currently enabled.
Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)") Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20230103092330.494102-1-wenst@chromium.org Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The gdsc_init() function will rewrite the CLK_DIS_WAIT field while
registering the GDSC (writing the value 0x2 by default). This will
override the setting done in the driver's probe function.
Set cx_gdsc.clk_dis_wait_val to 8 to follow the intention of the probe
function.
The gdsc_init() function will rewrite the CLK_DIS_WAIT field while
registering the GDSC (writing the value 0x2 by default). This will
override the setting done in the driver's probe function.
Set cx_gdsc.clk_dis_wait_val to 8 to follow the intention of the probe
function.
pnv_ioda_setup_pe_res() calls opal to map a resource with a PE. However,
the code assumes the resource is allocated and it uses the resource
address to find out the segment(s) which need to be mapped to the
PE. In the unlikely case where the resource hasn't been allocated, the
computation for the segment number is garbage, which can lead to
invalid memory access and potentially a kernel crash, such as:
Hitting the problem is not that easy. It was seen with a (semi-bogus)
PCI device with a class code of 0. The generic PCI framework doesn't
allocate resources in such a case.
The patch is simply skipping resources which are still flagged with
IORESOURCE_UNSET.
We don't have the problem with 64-bit mem resources, as the address of
the resource is checked to be within the range of the 64-bit mmio
window. See pnv_ioda_reserve_dev_m64_pe() and pnv_pci_is_m64().
To discard false readings, one should use "ti,penirq-recheck-delay-usecs".
Checking get_pendown_state() at the beginning, most of the time fails
causing malfunctioning.
Controllers that report pressure (e.g. ADS7846) use 5 commands and the
correct sequence is READ_X, READ_Y, READ_Z1, READ_Z2, PWRDOWN.
Controllers that don't report pressure (e.g. ADS7845/ADS7843) use only 3
commands and the correct sequence should be READ_X, READ_Y, PWRDOWN. But
the sequence sent was incorrect: READ_X, READ_Y, READ_Z1.
Fix this by setting the third (and last) command to PWRDOWN.
In case imx_register_uart_clocks return early, the imx_uart_clocks
memory will be no freed. So execute kfree always to avoid memory leak.
Fixes: 379c9a24cc23 ("clk: imx: Fix reparenting of UARTs not associated with stdout") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230104110032.1220721-2-peng.fan@oss.nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When the code flow arrives at printing the error message in
cpg_mssr_resume_noirq(), we know for sure that we are not running on an
RZ/A Soc, as the code checked for that before.
ADS7845 doesn't support pressure.
Avoid the following error reported by libinput-list-devices:
"ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE".
If cpg_mssr_common_init() fails after assigning priv to global variable
cpg_mssr_priv, it deallocates priv, but cpg_mssr_priv keeps dangling
pointer that potentially can be used later.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
The time the device takes to deassert its RDY output following an
I2C stop condition scales with the core clock frequency.
To prevent level-triggered interrupts from being reasserted after
the interrupt handler returns, increase the time before returning
to account for the worst-case delay (~140 us) plus margin.
Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/Y7Rs484ypy4dab5G@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unless it is being done as part of servicing a soft reset interrupt,
configuring channels on-the-fly (as is the case when writing to the
ati_trigger attribute) may cause GPIO3 (which reflects the state of
touch for a selected channel) to be inadvertently asserted.
To solve this problem, follow the vendor's recommendation and write
all channel configuration as well as the REDO_ATI register field as
part of a single block write. This ensures the device has been told
to re-calibrate itself following an I2C stop condition, after which
sensing resumes and GPIO3 may be asserted.
Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/Y7Rs8GyV7g0nF5Yy@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.
Currently, the driver does not call fwnode_handle_put() on nested
event nodes. This patch solves this problem by adding the missing
instances of fwnode_handle_put().
As part of this change, the logic which parses each channel's key
code is gently refactored in order to reduce the number of places
from which fwnode_handle_put() is called.
Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/Y7Rsx68k/gvDVXAt@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On the QCS404 platform the driver for the Global Clock Controller
doens't define gpll0_out_aux and gpll4_out_aux clocks, so it's not
possible to use them as parents. Remove entries for these clocks.
Note: backporting this patch to earlier kernels would also require a
previous patch which switches the gcc driver to use ARRAY_SIZE for
parent data arrays.
32K usb suspend clock gate is shared with usb_root_clk, this
shared clock gate was initially defined only for usb suspend
clock, usb suspend clk is kept on while system is active or
system sleep with usb wakeup enabled, so usb root clock is
fine with this situation; with the commit cf7f3f4fa9e5
("clk: imx8mp: fix usb_root_clk parent"), this clock gate is
changed to be for usb root clock, but usb root clock will
be off while usb is suspended, so usb suspend clock will be
gated too, this cause some usb functionalities will not work,
so define this clock to be a shared clock gate to conform with
the real HW status.
Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Cc: stable@vger.kernel.org # v5.19+ Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1664549663-20364-2-git-send-email-jun.li@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the introduction of the subflow ULP diag interface, the
dump callback accessed all the subflow data with lockless.
We need either to annotate all the read and write operation accordingly,
or acquire the subflow socket lock. Let's do latter, even if slower, to
avoid a diffstat havoc.
Fixes: 5147dfb50832 ("mptcp: allow dumping subflow context to userspace") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility that usb_role_switch device is unregistered before
the user put usb_role_switch. In this case, the user may still want to
get/set_role() since the user can't sense the changes of usb_role_switch.
This will add a flag to show if usb_role_switch is already registered and
avoid unwanted behaviors.
Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches")
cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240129093739.2371530-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current design, usb role class driver will get usb_role_switch parent's
module reference after the user get usb_role_switch device and put the
reference after the user put the usb_role_switch device. However, the
parent device of usb_role_switch may be removed before the user put the
usb_role_switch. If so, then, NULL pointer issue will be met when the user
put the parent module's reference.
This will save the module pointer in structure of usb_role_switch. Then,
we don't need to find module by iterating long relations.
Fixes: 5c54fcac9a9d ("usb: roles: Take care of driver module reference counting")
cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240129093739.2371530-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is observed sometimes when tethering is used over NCM with Windows 11
as host, at some instances, the gadget_giveback has one byte appended at
the end of a proper NTB. When the NTB is parsed, unwrap call looks for
any leftover bytes in SKB provided by u_ether and if there are any pending
bytes, it treats them as a separate NTB and parses it. But in case the
second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that
were parsed properly in the first NTB and saved in rx_list are dropped.
In this case, the giveback is of 1025 bytes and block length is 1024.
The rest 1 byte (which is 0x00) won't be parsed resulting in drop of
all datagrams in rx_list.
Same is case with packets of size 2048:
[002] d..1 7828.557948: dwc3_gadget_giveback: ep1out:
req 0000000011dfd96e length 2049/16384 zsI ==> 0
[002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342
[002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800
Lecroy shows one byte coming in extra confirming that the byte is coming
in from PC:
According to Windows driver, no ZLP is needed if wBlockLength is non-zero,
because the non-zero wBlockLength has already told the function side the
size of transfer to be expected. However, there are in-market NCM devices
that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize.
To deal with such devices, it pads an extra 0 at end so the transfer is no
longer multiple of wMaxPacketSize.
Driver append an additional zero packet request when queue a packet, which
length mod max packet size is 0. When transfer complete, run to line 831,
usb_gadget_giveback_request() will free this requestion. 836 condition is
true, so cdns3_gadget_ep_free_request() free this request again.
Add check at line 829, skip call usb_gadget_giveback_request() if it is
additional zero length packet request. Needn't call
usb_gadget_giveback_request() because it is allocated in this driver.
Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cadence have several controllers from 0x000403xx family but current
driver suuport detecting only one with DID equal 0x0004034E.
It causes that if someone uses different CDNSP controller then driver
will use incorrect version and register space.
Patch fix this issue.
cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20240215121609.259772-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
host.c file has some parts of code that were introduced for CDNS3 driver
and should not be used with CDNSP driver.
This patch blocks using these parts of codes by CDNSP driver.
These elements include:
- xhci_plat_cdns3_xhci object
- cdns3 specific XECP_PORT_CAP_REG register
- cdns3 specific XECP_AUX_CTRL_REG1 register
cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20240206104018.48272-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't go through soft-disconnection sequence if the controller hasn't
started. Otherwise, there will be timeout and warning reports from the
soft-disconnection flow.
There is infrastructure to rewrite return thunks to point to any
random thunk one desires, unwrap that from CALL_THUNKS, which up to
now was the sole user of that.
[ bp: Make the thunks visible on 32-bit and add ifdeffery for the
32-bit builds. ]
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Cc: stable@vger.kernel.org Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20240205102337.439002-1-alexander.sverdlin@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original
intent.
Fixes: 9d4c75800f61 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()") Cc: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Tom Parkin <tparkin@katalix.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While calculating the hardware interrupt number for a MSI interrupt, the
higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI
domain number gets truncated because of the shifted value casting to return
type of pci_domain_nr() which is 'int'. This for example is resulting in
same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0.
To address this cast the PCI domain number to 'irq_hw_number_t' before left
shifting it to calculate the hardware interrupt number.
Please note that this fixes the issue only on 64-bit systems and doesn't
change the behavior for 32-bit systems i.e. the 32-bit systems continue to
have the issue. Since the issue surfaces only if there are too many PCIe
controllers in the system which usually is the case in modern server
systems and they don't tend to run 32-bit kernels.
Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vgic_get_irq() may not return a valid descriptor if there is no ITS that
holds a valid translation for the specified INTID. If that is the case,
it is safe to silently ignore it and continue processing the LPI pending
table.
It is possible that an LPI mapped in a different ITS gets unmapped while
handling the MOVALL command. If that is the case, there is no state that
can be migrated to the destination. Silently ignore it and continue
migrating other LPIs.
Cc: stable@vger.kernel.org Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20240221092732.4126848-3-oliver.upton@linux.dev Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.
This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".
Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".
Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.
Link: https://linux-hardware.org/?computer=AC4301C0542A Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet") Closes: https://github.com/onitake/gsl-firmware/issues/91 Cc: stable@vger.kernel.org Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was said that authenticated encryption could produce invalid tag when
the data that is being encrypted is modified [1]. So, fix this problem by
copying the data into the clone bio first and then encrypt them inside the
clone bio.
This may reduce performance, but it is needed to prevent the user from
corrupting the device by writing data with O_DIRECT and modifying them at
the same time.
projects / thirdparty / kernel / stable.git / log
