In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing
b_tx_status.queue. This change prevents callbacks from using already freed
skb due to anchor was not killed before freeing such skb.
With a quite rare chance, RX report might be problematic to make SW think
a packet is received on 6 GHz band even if the chip does not support 6 GHz
band actually. Since SW won't initialize stuffs for unsupported bands, NULL
dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() ->
rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it.
sk->sk_uid can be read while another thread changes its
value in sockfs_setattr().
Add sk_uid(const struct sock *sk) helper to factorize the needed
READ_ONCE() annotations, and add corresponding WRITE_ONCE()
where needed.
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://patch.msgid.link/20250620133001.4090592-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
I tried to fix the stack usage in this function a couple of years ago,
but there is still a problem with the latest gcc versions in some
configurations:
net/caif/cfctrl.c:553:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Reduce this once again, with a separate cfctrl_link_setup() function that
holds the bulk of all the local variables. It also turns out that the
param[] array that takes up a large portion of the stack is write-only
and can be left out here.
In ath12k_dp_tx_get_encap_type(), the arvif parameter is only used to
retrieve the ab pointer. In vdev delete sequence the arvif->ar could
become NULL and that would trigger kernel panic.
Since the caller ath12k_dp_tx() already has a valid ab pointer, pass it
directly to avoid panic and unnecessary dereferencing.
PC points to "ath12k_dp_tx+0x228/0x988 [ath12k]"
LR points to "ath12k_dp_tx+0xc8/0x988 [ath12k]".
The Backtrace obtained is as follows:
ath12k_dp_tx+0x228/0x988 [ath12k]
ath12k_mac_tx_check_max_limit+0x608/0x920 [ath12k]
ieee80211_process_measurement_req+0x320/0x348 [mac80211]
ieee80211_tx_dequeue+0x9ac/0x1518 [mac80211]
ieee80211_tx_dequeue+0xb14/0x1518 [mac80211]
ieee80211_tx_prepare_skb+0x224/0x254 [mac80211]
ieee80211_xmit+0xec/0x100 [mac80211]
__ieee80211_subif_start_xmit+0xc50/0xf40 [mac80211]
ieee80211_subif_start_xmit+0x2e8/0x308 [mac80211]
netdev_start_xmit+0x150/0x18c
dev_hard_start_xmit+0x74/0xc0
Fixes: e93bbd65547e ("wifi: ath12k: fix packets are sent in native wifi mode while we set raw mode") Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250606044936.3989400-1-tamizh.raja@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the budget for monitor ring is reduced during each ring entry
reaping and again when the end reason is HAL_MON_END_OF_PPDU, leading to
inefficient budget use. The below mentioned commit intended to decrement
the budget only for HAL_MON_END_OF_PPDU but did not remove the other
decrement. Fix this by eliminating the budget decrement for each ring entry
reaping, ensuring the driver always reaps one full PPDU worth of entries
from the monitor destination ring.
With previous patch [1], ath12k_reg_update_chan_list() will be called
during reg_process_self_managed_hint().
reg_process_self_managed_hint() will hold rtnl_lock all the time.
But ath12k_reg_update_chan_list() may increase the occupation time of
rtnl_lock, because when wait flag is set, wait_for_completion_timeout()
will be called during 11d/hw scan.
Should minimize the occupation time of rtnl_lock as much as possible
to avoid interfering with rest of the system. So move the update channel
list operation to a new worker, so that wait_for_completion_timeout()
won't be called with the rtnl_lock held.
During beacon miss handling, ath12k driver iterates over active virtual
interfaces (vifs) and attempts to access the radio object (ar) via
arvif->deflink->ar.
However, after commit aa80f12f3bed ("wifi: ath12k: defer vdev creation for
MLO"), arvif is linked to a radio only after vdev creation, typically when
a channel is assigned or a scan is requested.
For P2P capable devices, a default P2P interface is created by
wpa_supplicant along with regular station interfaces, these serve as dummy
interfaces for P2P-capable stations, lack an associated netdev and initiate
frequent scans to discover neighbor p2p devices. When a scan is initiated
on such P2P vifs, driver selects destination radio (ar) based on scan
frequency, creates a scan vdev, and attaches arvif to the radio. Once the
scan completes or is aborted, the scan vdev is deleted, detaching arvif
from the radio and leaving arvif->ar uninitialized.
While handling beacon miss for station interfaces, P2P interface is also
encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter()
tries to dereference the uninitialized arvif->deflink->ar.
Fix this by verifying that vdev is created for the arvif before accessing
its ar during beacon miss handling and similar vif iterator callbacks.
==========================================================================
wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
IO hotplug add event is handled in the user space with drmgr tool.
After the device is enabled, the user space uses /sys/kernel/dlpar
interface with “dt add index <drc_index>” to update the device tree.
The kernel interface (dlpar_hp_dt_add()) finds the parent node for
the specified ‘drc_index’ from ibm,drc-info property. The recent FW
provides this property from 2017 onwards. But KVM guest code in
some releases is still using the older SLOF firmware which has
ibm,drc-indexes property instead of ibm,drc-info.
If the ibm,drc-info is not available, this patch adds changes to
search ‘drc_index’ from the indexes array in ibm,drc-indexes
property to support old FW.
Fixes: 02b98ff44a57 ("powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add") Reported-by: Kowshik Jois <kowsjois@linux.ibm.com> Signed-off-by: Haren Myneni <haren@linux.ibm.com> Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250531235002.239213-1-haren@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In function dump_xx_nlmsg(), when realloc() fails to allocate memory,
the original pointer to the buffer is overwritten with NULL. This causes
a memory leak because the previously allocated buffer becomes unreachable
without being freed.
Currently, in ieee80211_assign_beacon() mbssid count is updated as link's
bssid_indicator. mbssid count is the total number of MBSSID elements in
the beacon instead of Max BSSID indicator of the Multiple BSS set.
This will result in drivers obtaining an invalid bssid_indicator for BSSes
in a Multiple BSS set.
Fix this by updating link's bssid_indicator from MBSSID element for
Transmitting BSS and update the same for all of its Non-Transmitting BSSes.
When net_shaper_ops are enabled for MANA, netdev_ops_lock
becomes active.
MANA VF setup/teardown by netvsc follows this call chain:
netvsc_vf_setup()
dev_change_flags()
...
__dev_open() OR __dev_close()
dev_change_flags() holds the netdev mutex via netdev_lock_ops.
Meanwhile, mana_create_txq() and mana_create_rxq() in mana_open()
path call NAPI APIs (netif_napi_add_tx(), netif_napi_add_weight(),
napi_enable()), which also try to acquire the same lock, risking
deadlock.
Similarly in the teardown path (mana_close()), netif_napi_disable()
and netif_napi_del(), contend for the same lock.
Switch to the _locked variants of these APIs to avoid deadlocks
when the netdev_ops_lock is held.
Fixes: d4c22ec680c8 ("net: hold netdev instance lock during ndo_open/ndo_stop") Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-2-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Need to properly start and stop paging queues if they are present.
This is not an issue today since we don't support a paging queue
on any chips with queue reset.
Fixes: b22659d5d352 ("drm/amdgpu: switch amdgpu_sdma_reset_engine to use the new sdma function pointers") Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Running 3D applications with SVGA_FORCE_HOST_BACKED=1 or using an
ancient version of mesa was broken because the buffer was pinned in
VMW_BO_DOMAIN_SYS and could not be moved to VMW_BO_DOMAIN_MOB during
validation.
The compat_shader buffer should not pinned.
Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://lore.kernel.org/r/20250429203427.1742331-1-ian.forbes@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The netfilter hook is invoked with skb->dev for input netdevice, and
vif_dev for output netdevice. However at the point of invocation, skb->dev
is already set to vif_dev, and MR-forwarded packets are reported with
in=out:
BPF_JSET is a conditional jump and currently verifier.c:can_jump()
does not know about that. This can lead to incorrect live registers
and SCC computation.
When xsend() returns -1 (error), the check 'n < sizeof(buf)' incorrectly
treats it as success due to unsigned promotion. Explicitly check for -1
first.
Fixes: a4b7193d8efd ("selftests/bpf: Add sockmap test for redirecting partial skb data") Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Link: https://lore.kernel.org/r/20250612084208.27722-1-wangfushuai@baidu.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit ee971630f20f ("bpf: Allow some trace helpers for all prog
types") made bpf_get_cgroup_classid_curr helper available to all BPF
program types, not just networking programs.
This helper calls __task_get_classid() which internally calls
task_cls_state() requiring rcu_read_lock_bh_held(). This works
in networking/tc context where RCU BH is held, but triggers an RCU
warning when called from other contexts like BPF syscall programs
that run under rcu_read_lock_trace():
Fix this by also accepting rcu_read_lock_held() and
rcu_read_lock_trace_held() as valid RCU contexts in the
task_cls_state() function. This ensures the helper works correctly
in all needed RCU contexts where it might be called, regular RCU,
RCU BH (for networking), and RCU trace (for BPF syscall programs).
Fixes: ee971630f20f ("bpf: Allow some trace helpers for all prog types") Reported-by: syzbot+b4169a1cfb945d2ed0ec@syzkaller.appspotmail.com Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20250611-rcu-fix-task_cls_state-v3-1-3d30e1de753f@posteo.net Closes: https://syzkaller.appspot.com/bug?extid=b4169a1cfb945d2ed0ec Signed-off-by: Sasha Levin <sashal@kernel.org>
When sending plaintext data, we initially calculated the corresponding
ciphertext length. However, if we later reduced the plaintext data length
via socket policy, we failed to recalculate the ciphertext length.
This results in transmitting buffers containing uninitialized data during
ciphertext transmission.
This causes uninitialized bytes to be appended after a complete
"Application Data" packet, leading to errors on the receiving end when
parsing TLS record.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20250609020910.397930-2-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
The netconsole driver currently registers the basic console driver
unconditionally during initialization, even when only extended targets
are configured. This results in unnecessary console registration and
performance overhead, as the write_msg() callback is invoked for every
log message only to return early when no matching targets are found.
Optimize the driver by conditionally registering console drivers based
on the actual target configuration. The basic console driver is now
registered only when non-extended targets exist, same as the extended
console. The implementation also handles dynamic target creation through
the configfs interface.
This change eliminates unnecessary console driver registrations,
redundant write_msg() callbacks for unused console types, and associated
lock contention and target list iterations. The optimization is
particularly beneficial for systems using only the most common extended
console type.
We observed an issue from the latest selftest: sockmap_redir where
sk_psock(psock->sk) != psock in the backlog. The root cause is the special
behavior in sockmap_redir - it frequently performs map_update() and
map_delete() on the same socket. During map_update(), we create a new
psock and during map_delete(), we eventually free the psock via rcu_work
in sk_psock_drop(). However, pending workqueues might still exist and not
be processed yet. If users immediately perform another map_update(), a new
psock will be allocated for the same sk, resulting in two psocks pointing
to the same sk.
When the pending workqueue is later triggered, it uses the old psock to
access sk for I/O operations, which is incorrect.
Timing Diagram:
cpu0 cpu1
map_update(sk):
sk->psock = psock1
psock1->sk = sk
map_delete(sk):
rcu_work_free(psock1)
map_update(sk):
sk->psock = psock2
psock2->sk = sk
workqueue:
wakeup with psock1, but the sk of psock1
doesn't belong to psock1
rcu_handler:
clean psock1
free(psock1)
Previously, we used reference counting to address the concurrency issue
between backlog and sock_map_close(). This logic remains necessary as it
prevents the sk from being freed while processing the backlog. But this
patch prevents pending backlogs from using a psock after it has been
stopped.
Note: We cannot call cancel_delayed_work_sync() in map_delete() since this
might be invoked in BPF context by BPF helper, and the function may sleep.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20250609025908.79331-1-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
The 4-octet EHT MCS/NSS subfield is only used for 20 MHz-only
non-AP STA. Correct the interpretation of this subfield to
prevent improper rate limitations.
rtw89_sar_set_src() may be called at driver early init phase when
applying SAR configuration via ACPI. wiphy lock is not held there.
Since the assertion was initially added for rtw89_apply_sar_common() call
path and may be helpful for other places in future changes, keep it but
move it under RTW89_FLAG_PROBE_DONE test.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 88ca3107d2ce ("wifi: rtw89: sar: add skeleton for SAR configuration via ACPI") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250604161339.119954-2-pchelkin@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
The following assertion is triggered on the rtw89 driver startup. It
looks meaningless to hold wiphy lock on the early init stage so drop the
assertion.
The "link_id" value comes from the user via debugfs. If it's larger
than BITS_PER_LONG then that would result in shift wrapping and
potentially an out of bounds access later. In fact, we can limit it
to IEEE80211_MLD_MAX_NUM_LINKS (15).
Fortunately, only root can write to debugfs files so the security
impact is minimal.
drm_panthor_gpu_info::shader_present is currently automatically offset
by 4 byte to meet Arm's 32-bit/64-bit field alignment rules, but those
constraints don't stand on 32-bit x86 and cause a mismatch when running
an x86 binary in a user emulated environment like FEX. It's also
generally agreed that uAPIs should explicitly pad their struct fields,
which we originally intended to do, but a mistake slipped through during
the submission process, leading drm_panthor_gpu_info::shader_present to
be misaligned.
This uAPI change doesn't break any of the existing users of panthor
which are either arm32 or arm64 where the 64-bit alignment of
u64 fields is already enforced a the compiler level.
Changes in v2:
- Rename the garbage field into pad0 and adjust the comment accordingly
- Add Liviu's A-b
Evaluating the requirement to use a limited RGB quantization range
involves a verification of the output format, among others, but this is
currently performed before actually computing the format, hence relying
on the old connector state.
Move the call to hdmi_is_limited_range() after hdmi_compute_config() to
ensure the verification is done on the updated output format.
Fixes: 027d43590649 ("drm/connector: hdmi: Add RGB Quantization Range to the connector state") Reviewed-by: Dmitry Baryshkov <lumag@kernel.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-1-74c9c4a8ac0c@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When moving the Sitronix DRM drivers and renaming their Kconfig symbols,
the old symbols were kept, aiming to provide a seamless migration path
when running "make olddefconfig" or "make oldconfig".
However, the old compatibility symbols are not visible. Hence unless
they are selected by another symbol (which they are not), they can never
be enabled, and no backwards compatibility is provided.
Drop the broken mechanism and the old symbols.
Fixes: 9b8f32002cddf792 ("drm/sitronix: move tiny Sitronix drivers to their own subdir") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20395b14effe5e2e05a4f0856fdcda51c410329d.1747751592.git.geert+renesas@glider.be Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We cannot use vmap_pfn() in vmap_udmabuf() as it would fail the pfn_valid()
check in vmap_pfn_apply(). This is because vmap_pfn() is intended to be
used for mapping non-struct-page memory such as PCIe BARs. Since, udmabuf
mostly works with pages/folios backed by shmem/hugetlbfs/THP, vmap_pfn()
is not the right tool or API to invoke for implementing vmap.
Previous commit missed two other places that need converting, it only
came out in tests on autobuilders now. Convert the rest of the driver.
Fixes: 68bdc4dc1130 ("MIPS: alchemy: gpio: use new line value setter callbacks") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20250727082442.13182-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The subsystem event test enables all "sched" events and makes sure there's
at least 3 different events in the output. It used to cat the entire trace
file to | wc -l, but on slow machines, that could last a very long time.
To solve that, it was changed to just read the first 100 lines of the
trace file. This can cause false failures as some events repeat so often,
that the 100 lines that are examined could possibly be of only one event.
Instead, create an awk script that looks for 3 different events and will
exit out after it finds them. This will find the 3 events the test looks
for (eventually if it works), and still exit out after the test is
satisfied and not cause slower machines to run forever.
The battery manufacturer string was incorrectly null terminated using
bat_model instead of bat_manu. This could result in an unintended
write to the wrong field and potentially incorrect behavior.
fixe the issue by correctly null terminating the bat_manu string.
Fixes: 32890b983086 ("Staging: initial version of the nvec driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250719080755.3954373-1-alok.a.tiwari@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Turns out that the AMD variant of the G1 uses different EC registers
than the Intel variant. Differentiate them and apply the correct ones
to the AMD variant.
Fixes: b369395c895b ("platform/x86: oxpec: Add support for the OneXPlayer G1") Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250718163305.159232-1-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The intel_vsec_header information for the crashlog feature is
incorrect.
Update the VSEC header with correct sizing and count.
Since the crashlog entries are "merged" (num_entries = 2), the
separate capabilities entries must be merged as well.
Fixes: 0c45e76fcc62 ("drm/xe/vsec: Support BMG devices") Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-4-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
By definition, the Designated Vendor Specific Extended Capability
(DVSEC) revision should be 1.
Add the rev value to be correct.
Fixes: 0c45e76fcc62 ("drm/xe/vsec: Support BMG devices") Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-3-michael.j.ruhl@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
gbphy_dev_match_id() should be taking a const pointer, as the pointer
passed to it from the container_of() call was const to start with (it
was accidentally cast away with the call.) Fix this all up by correctly
marking the pointer types.
Cc: Alex Elder <elder@kernel.org> Cc: greybus-dev@lists.linaro.org Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *") Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/2025070115-reoccupy-showy-e2ad@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current SDCA Control parsing only checks the deferrable flag for
Read/Write and Dual Ranked controls. However, reads can defer as well as
writes so Read Only controls should also check for the deferrable flag.
Add the handling for this into find_sdca_entity_control().
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20250707124155.2596744-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If dpm_suspend_start() fails, dpm_resume_end() must be called to
recover devices whose suspend callbacks have been called, but this
does not happen in the KEXEC_JUMP flow's error path due to a confused
goto target label.
Address this by using the correct target label in the goto statement in
question and drop the Resume_console label that is not used any more.
Fixes: 2965faa5e03d ("kexec: split kexec_load syscall from kexec core code") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Baoquan He <bhe@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/2396879.ElGaqSPkdT@rjwysocki.net
[ rjw: Drop unused label and amend the changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In cpufreq_policy_put_kobj(), policy->rwsem is used. But in
cpufreq_policy_alloc(), if freq_qos_add_notifier() returns an error, error
path via err_kobj_remove or err_min_qos_notifier will be reached and
cpufreq_policy_put_kobj() will be called before policy->rwsem is
initialized. Thus, the calling of init_rwsem() should be moved to where
before these two error paths can be reached.
Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-3-zhenglifeng1@huawei.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cpufreq-based invariance is enabled in cpufreq_register_driver(),
but never disabled after registration fails. Move the invariance
initialization to where all other initializations have been successfully
done to solve this problem.
Fixes: 874f63531064 ("cpufreq: report whether cpufreq supports Frequency Invariance (FI)") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-2-zhenglifeng1@huawei.com
[ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the passive mode, intel_cpufreq_update_pstate() sets HWP_MIN_PERF in
accordance with the target frequency to ensure delivering adequate
performance, but it sets HWP_DESIRED_PERF to 0, so the processor has no
indication that the desired performance level is actually equal to the
floor one. This may cause it to choose a performance point way above
the desired level.
Moreover, this is inconsistent with intel_cpufreq_adjust_perf() which
actually sets HWP_DESIRED_PERF in accordance with the target performance
value.
Address this by adjusting intel_cpufreq_update_pstate() to pass
target_pstate as both the minimum and the desired performance levels
to intel_cpufreq_hwp_update().
Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Shashank Balaji <shashank.mahadasyam@sony.com> Link: https://patch.msgid.link/6173276.lOV4Wx5bFT@rjwysocki.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 96ffcdf239de ("PM / devfreq: Remove redundant governor_name from
struct devfreq") removes governor_name and uses governor->name to replace
it. But devfreq->governor may be NULL and directly using
devfreq->governor->name may cause null pointer exception. Move the check of
governor to before using governor->name.
Following warnings can be observed with CHECK_DTBS=y for the RK3528:
rk3528-pinctrl.dtsi:101.36-105.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym0-led_dpx: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:108.38-112.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym0-led_link: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:115.36-119.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym0-led_spd: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:122.36-126.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym1-led_dpx: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:129.38-133.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym1-led_link: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:136.36-140.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym1-led_spd: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:782.32-790.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-rx_bus2: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:793.32-801.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-tx_bus2: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:804.36-810.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-rgmii_clk: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:813.36-823.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-rgmii_bus: Character '_' not recommended in node name
Rename the affected nodes to fix these warnings.
Fixes: a31fad19ae39 ("arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250621113859.2146400-1-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MUX which either outputs DSI or 2nd channel LVDS signals is part of
the SoM. Move the pinmuxing of the GPIO used for controlling the MUX
to the SoM dtsi file.
The reference manual for the i.MX8MN states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reference manual for the i.MX8MM states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The polarity of the DE signal of the transceiver is active-high for
sending. Therefore rs485-rts-active-low is wrong and needs to be
removed to make RS485 transmissions work.
The step_after_suspend_test verifies that the system successfully
suspended and resumed by setting a timerfd and checking whether the
timer fully expired. However, this method is unreliable due to timing
races.
In practice, the system may take time to enter suspend, during which the
timer may expire just before or during the transition. As a result,
the remaining time after resume may show non-zero nanoseconds, even if
suspend/resume completed successfully. This leads to false test failures.
Replace the timer-based check with a read from
/sys/power/suspend_stats/success. This counter is incremented only
after a full suspend/resume cycle, providing a reliable and race-free
indicator.
Also remove the unused file descriptor for /sys/power/state, which
remained after switching to a system() call to trigger suspend [1].
Old revisions of the ROCK 4D board have a dedicated crystal to
supply the RTL8211F PHY's 25MHz clock input. At least some newer
revisions instead use REFCLKO25M_GMAC0_OUT. The DT already has
this half-prepared, but there are some issues:
1. The DT relies on auto-selecting the right PHY driver, which
requires that it works good enough to read the ID registers.
This does not work without the clock, which is handled by
the PHY driver. By updating the compatible to contain the
RTL8211F IDs, so that the operating system can choose the
right PHY driver without relying on a pre-powered PHY.
2. Despite the name REFCLKO25M_GMAC0_OUT could also provide a
different frequency, so ensure it is explicitly set to 25
MHz as expected by the PHY.
3. While at it switch from deprecated "enable-gpio" to standard
"enable-gpios".
When error is injected with the ERR_FORCE register, then this register
is not auto cleared on clearing the ERR_STATUS register. This causes
repeated interrupts on error injection. To fix, set the ERR_FORCE to
zero along with clearing the ERR_STATUS register after handling error.
PWM_3_DSI is used as the HDMI Hot-Plug Detect (HPD) GPIO for the Verdin
DSI-to-HDMI adapter. After the commit 33bab9d84e52 ("arm64: dts: ti:
k3-am62p: fix pinctrl settings"), the pin was incorrectly set as output
without RXACTIVE, breaking HPD detection and display functionality.
The issue was previously hidden and worked by chance before the mentioned
pinctrl fix.
Fix the pinmux configuration to correctly set PWM_3_DSI GPIO as an input.
This commit fixes a typo introduced in commit ee368a10d0df ("ARM: dts: am335x-boneblack.dts: unique gpio-line-names").
gpio0_7 is located on the P9 header on the BBB.
This was verified with a BeagleBone Black by toggling the pin and
checking with a multimeter that it corresponds to pin 42 on the P9
header.
The compiler does not know that waitid() will only ever return 0 or -1.
If waitid() would return a positive value than waitpid() would return that
same value and *status would not be initialized.
However users calling waitpid() know that the only possible return values
of it are 0 or -1. They therefore might check for errors with
'ret == -1' or 'ret < 0' and use *status otherwise. The compiler will then
warn about the usage of a potentially uninitialized variable.
$ gcc -Wall -Os -Werror -nostdlib -nostdinc -static -Iusr/include -Itools/include/nolibc/ -o /dev/null test.c
test.c: In function ‘main’:
test.c:12:9: error: ‘status’ may be used uninitialized [-Werror=maybe-uninitialized]
12 | printf("status %x\n", status);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
test.c:6:18: note: ‘status’ was declared here
6 | int ret, status;
| ^~~~~~
cc1: all warnings being treated as errors
Avoid the warning by normalizing waitid() errors to '-1' in waitpid().
Fixes: 0c89abf5ab3f ("tools/nolibc: implement waitpid() in terms of waitid()") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20250707-nolibc-waitpid-uninitialized-v1-1-dcd4e70bcd8f@linutronix.de Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The get_pd_power_uw() function can crash with a NULL pointer dereference
when em_cpu_get() returns NULL. This occurs when a CPU becomes impossible
during runtime, causing get_cpu_device() to return NULL, which propagates
through em_cpu_get() and leads to a crash when em_span_cpus() dereferences
the NULL pointer.
Add a NULL check after em_cpu_get() and return 0 if unavailable,
matching the existing fallback behavior in __dtpm_cpu_setup().
Fixes: eb82bace8931 ("powercap/drivers/dtpm: Scale the power with the load") Signed-off-by: Sivan Zohar-Kotzer <sivany32@gmail.com> Link: https://patch.msgid.link/20250701221355.96916-1-sivany32@gmail.com
[ rjw: Drop an excess empty code line ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While the code "looks" correct, the compiler has no way to know that
doing "fun" pointer math like this really isn't a write off the end of
the structure as there is no hint anywhere that the structure has data
at the end of it.
This causes the following build warning:
In function 'fortify_memset_chk',
inlined from 'ctx_fire_notification.isra' at drivers/misc/vmw_vmci/vmci_context.c:254:3:
include/linux/fortify-string.h:480:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
480 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So revert it for now and it can come back in the future in a "sane" way
that either correctly makes the structure know that there is trailing
data, OR just the payload structure is properly referenced and zeroed
out.
Fixes: bfb4cf9fb97e ("vmci: Prevent the dispatching of uninitialized payloads") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Lizhi Xu <lizhi.xu@windriver.com> Link: https://lore.kernel.org/r/20250703171021.0aee1482@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Because pps_cdev_poll() returns unconditionally EPOLLIN,
a user space program that calls select/poll get always an immediate data
ready-to-read response. As a result the intended use to wait until next
data becomes ready does not work.
User space snippet:
struct pollfd pollfd = {
.fd = open("/dev/pps0", O_RDONLY),
.events = POLLIN|POLLERR,
.revents = 0 };
while(1) {
poll(&pollfd, 1, 2000/*ms*/); // returns immediate, but should wait
if(revents & EPOLLIN) { // always true
struct pps_fdata fdata;
memset(&fdata, 0, sizeof(memdata));
ioctl(PPS_FETCH, &fdata); // currently fetches data at max speed
}
}
Lets remember the last fetch event counter and compare this value
in pps_cdev_poll() with most recent event counter
and return 0 if they are equal.
The reproducer executes the host's unlocked_ioctl call in two different
tasks. When init_context fails, the struct vmci_event_ctx is not fully
initialized when executing vmci_datagram_dispatch() to send events to all
vm contexts. This affects the datagram taken from the datagram queue of
its context by another task, because the datagram payload is not initialized
according to the size payload_size, which causes the kernel data to leak
to the user space.
Before dispatching the datagram, and before setting the payload content,
explicitly set the payload content to 0 to avoid data leakage caused by
incomplete payload initialization.
Reword and expand the invariant documentation for `MiscDeviceRegistration`
to clarify what it means for the inner device to be "registered".
It expands to explain:
- `inner` points to a `miscdevice` registered via `misc_register`.
- This registration stays valid for the entire lifetime of the object.
- Deregistration is guaranteed on `Drop`, via `misc_deregister`.
In the error paths after fb_info structure is successfully allocated,
the memory allocated in fb_deferred_io_init() for info->pagerefs is not
freed. Fix that by adding the cleanup function on the error path.
The introduction of a padding field in the gpib_board_info_ioctl is
showing up as initialized data on the stack frame being copyied back
to userspace in function board_info_ioctl. The simplest fix is to
initialize the entire struct to zero to ensure all unassigned padding
fields are zero'd before being copied back to userspace.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Fixes: 9dde4559e939 ("staging: gpib: Add GPIB common core driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250623220958.280424-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current code should be safe as the PDE widget only registers for the
two events handled in the switch statement. However, it is causing a
smatch warning and also is a little fragile to future code changes, add
a default case to avoid the warning and make the code more robust.
Fixes: 2c8b3a8e6aa8 ("ASoC: SDCA: Create DAPM widgets and routes from DisCo") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20250624122844.2761627-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The binary attribute const changes recently for the sram driver were
made in a way that hid the fact that we would be casting a const pointer
to a non-const one. So explicitly make the cast so that it is obvious
and preserve the const pointer in the sram_reserve_cmp() function.
The stm32_spi_probe function now includes a check to ensure that the
pointer returned by of_device_get_match_data is not NULL before
accessing its members. This resolves a warning where a potential NULL
pointer dereference could occur when accessing cfg->has_device_mode.
Before accessing the 'has_device_mode' member, we verify that 'cfg' is
not NULL. If 'cfg' is NULL, an error message is logged.
This change ensures that the driver does not attempt to access
configuration data if it is not available, thus preventing a potential
system crash due to a NULL pointer dereference.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310191831.MLwx1c6x-lkp@intel.com/ Fixes: fee681646fc8 ("spi: stm32: disable device mode with st,stm32f4-spi compatible") Link: https://patch.msgid.link/20250616-spi-upstream-v1-2-7e8593f3f75d@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root-cause of this is the IRQF_NO_THREAD flag used by the intel-pinctrl
code. Setting IRQF_NO_THREAD requires all interrupt handlers for GPIO ISRs
to use raw-spinlocks only since normal spinlocks can sleep in PREEMPT-RT
kernels and with IRQF_NO_THREAD the interrupt handlers will always run in
an atomic context [1].
vsc_tp_isr() calls wake_up(&tp->xfer_wait), which uses a regular spinlock,
breaking the raw-spinlocks only rule for Intel GPIO ISRs.
Make vsc_tp_isr() run as threaded ISR instead of as hard ISR to fix this.
The event_notify callback in some cases calls vsc_tp_xfer(), which checks
tp->assert_cnt and waits for it through the tp->xfer_wait wait-queue.
And tp->assert_cnt is increased and the tp->xfer_wait queue is woken o
from the interrupt handler.
So the interrupt handler which is running the event callback is waiting for
itself to signal that it can continue.
This happens to work because the event callback runs from the threaded
ISR handler and while that is running the hard ISR handler will still
get called a second / third time for further interrupts and it is the hard
ISR handler which does the atomic_inc() and wake_up() calls.
But having the threaded ISR handler wait for its own interrupt to trigger
again is not how a threaded ISR handler is supposed to be used.
Move the running of the event callback from a threaded interrupt handler
to a workqueue since a threaded ISR should not wait for events from its
own interrupt.
This is a preparation patch for moving the atomic_inc() and wake_up() calls
to the threaded ISR handler, which is necessary to fix a locking issue.
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Signed-off-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250623085052.12347-9-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make mei_vsc_remove() properly unset the callback to avoid a dead callback
sticking around after probe errors or unbinding of the platform driver.
Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device") Signed-off-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250623085052.12347-8-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mei_vsc_hw_reset() gets called from mei_start() and mei_stop() in
the latter case we do not need to re-init the VSC by calling vsc_tp_init().
mei_stop() only happens on shutdown and driver unbind. On shutdown we
don't need to load + boot the firmware and if the driver later is
bound to the device again then mei_start() will do another reset.
The intr_enable flag is true when called from mei_start() and false on
mei_stop(). Skip vsc_tp_init() when intr_enable is false.
This avoids unnecessarily uploading the firmware, which takes 11 seconds.
This change reduces the poweroff/reboot time by 11 seconds.
Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device") Signed-off-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250623085052.12347-3-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix memory leak and call ucsi_destroy() from the driver's remove
function and probe's error path in order to remove debugfs files and
free the memory. Also call yoga_c630_ec_unregister_notify() in the
probe's error path.
After a recent restructuring of the ITS mitigation, RSB stuffing can no longer
be enabled in eIBRS+Retpoline mode. Before ITS, retbleed mitigation only
allowed stuffing when eIBRS was not enabled. This was perfectly fine since
eIBRS mitigates retbleed.
However, RSB stuffing mitigation for ITS is still needed with eIBRS. The
restructuring solely relies on retbleed to deploy stuffing, and does not allow
it when eIBRS is enabled. This behavior is different from what was before the
restructuring. Fix it by allowing stuffing in eIBRS+retpoline mode also.
projects / thirdparty / kernel / stable.git / log
