Both vm->xef and XE_LRC_CREATE_USER_CTX indicate in xe_lrc_init that
the context originates from userspace. However, XE_LRC_CREATE_USER_CTX
has a broader scope as it may be set even when no vm->xef is present.
The XE_BO_FLAG_PINNED_LATE_RESTORE flag can be extended to both cases,
so there is no point in handling the two cases separately.
Let's combine vm->xef and XE_LRC_CREATE_USER_CTX checks to detect
userspace context.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Suggested-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://lore.kernel.org/r/20251003162619.1984236-6-piotr.piorkowski@intel.com
drm/xe/pf: Force use user VRAM for LMEM provisioning
The LMEM assigned to VFs should be allocated from the general-purpose
VRAM pool, not from the kernel-reserved region.
Let's force the use of general-purpose VRAM for BOs intended for VFs.
drm/xe: Force user context allocations in user VRAM
In general, kernel structures should be allocated in the kernel-dedicated
VRAM region. However, userspace context data - while used by the kernel -
does not need to reside there.
Let's force the allocation of such data in the general-purpose VRAM region
accessible to userspace.
drm/xe: Introduce new BO flag XE_BO_FLAG_FORCE_USER_VRAM
When using a separate VRAM region for kernel allocations,
some kernel structures, such as context userspace data,
should not reside in the VRAM region dedicated to the kernel.
The VRAM kernel region is intended only for allocations necessary
for driver operation. Allocations created via ioctl are long-lived
and not easily evictable. If this region runs out of space,
there may not be a fallback, which could cause failures.
To prevent this, add a new BO flag that explicitly forces the BO to be
allocated in the general-purpose VRAM region accessible to userspace,
avoiding the kernel-only VRAM region.
drm/xe: Add initial support for separate kernel VRAM region on the tile
So far, kernel and userspace allocations have shared the same VRAM region.
However, in some scenarios, it may be necessary to reserve a separate
VRAM area exclusively for kernel allocations.
Let's add preliminary support for such a configuration.
v2:
- replaced for_each_bo_flag_vram with the improved
for_each_set_bo_vram_flag helper (Matthew)
- moved the VRAM flag iteration macro definition into xe_bo.c (Matthew)
- drop unused bo_flgas from bo_vram_flags_to_vram_placement (Matthew)
- use hweight32 helper in __xe_bo_fixed_placement for readability
(Matthew)
v3: remove unnecessary VRAM fixup id
Due to change in the VF migration recovery design this code
is not needed any more.
v3:
- Add commit message (Michal / Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20251002233824.203417-4-michal.wajdeczko@intel.com
Due to change in the VF migration recovery design this code
is not needed any more.
v3:
- Add commit message (Michal / Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20251002233824.203417-3-michal.wajdeczko@intel.com
Due to change in the VF migration recovery design this code
is not needed any more.
v3:
- Add commit message (Michal / Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20251002233824.203417-2-michal.wajdeczko@intel.com
Michal Wajdeczko [Tue, 30 Sep 2025 23:35:24 +0000 (01:35 +0200)]
drm/xe/pf: Synchronize VF FLR between all GTs
The PF part of the VF FLR processing shall be done after all GuCs
confirm that they finished their part VF FLR processing, otherwise
PF may start clearing VF's GGTT that other GuC may still accessing.
Michal Wajdeczko [Tue, 30 Sep 2025 23:35:23 +0000 (01:35 +0200)]
drm/xe/pf: Split VF FLR processing function
On multi-GT platforms (like PTL) we may want to run VF FLR on each
GuC (render and media) in parallel. Split our FLR function to allow
to wait for GT VF FLR completion separately.
Michal Wajdeczko [Tue, 30 Sep 2025 23:35:22 +0000 (01:35 +0200)]
drm/xe/pf: Unify VF state tracking log
By using single function that dumps VF state transition, final
logs are easier to analyze as there is always the same call site
in every debug message.
Michal Wajdeczko [Tue, 30 Sep 2025 23:35:21 +0000 (01:35 +0200)]
drm/xe/pf: Expose VF control operations over debugfs
To allow the user to control the activity of individual VFs,
expose basic VF control operations (pause, resume, stop, reset)
over the debugfs as write-only files:
Michal Wajdeczko [Tue, 30 Sep 2025 23:35:19 +0000 (01:35 +0200)]
drm/xe/pf: Add top level functions to control VFs
We already have control functions that we use to control the VF
state on the per-GT basis, but that is low level detail from the
user point of view, who rather expects VF-level functions.
For now add simple functions that just iterate over all GTs and
call per-GT control function. We will soon allow to use some of
them from the user facing interfaces like debugfs.
The allocation of the per-GT workqueue may fail and we shouldn't
ignore that. While around use drm managed allocation function
to drop our custom fini action.
drm/xe/i2c: Don't rely on d3cold.allowed flag in system PM path
In S3 and above sleep states, the device can loose power regardless of
d3cold.allowed flag. Bring up I2C controller explicitly in system PM
path to ensure its normal operation after losing power.
drm/xe/xe_late_bind_fw: Initialize uval variable in xe_late_bind_fw_num_fans()
Initialize the uval variable to 0 in xe_late_bind_fw_num_fans() to fix
a potential use of uninitialized variable warning and ensure predictable
behavior.
The variable is passed by reference to xe_pcode_read() which should
populate it on success, but initializing it to 0 provides a safe
default value and follows kernel coding best practices.
v2:
- uval = 0 which serves as both a safe default and the fallback
value when the pcode read operation fails.
v3:
- Handle MMIO failure (Rodrigo)
- The function should probably return the error and make the uval as
pointer-argument, like the pcode_read.
- Change the caller of this function to propagate the error
upwards if mmio failed.
Thomas Hellström [Tue, 30 Sep 2025 12:27:52 +0000 (14:27 +0200)]
drm/gpusvm, drm/xe: Fix userptr to not allow device private pages
When userptr is used on SVM-enabled VMs, a non-NULL
hmm_range::dev_private_owner value might mean that
hmm_range_fault() attempts to return device private pages.
Either that will fail, or the userptr code will not know
how to handle those.
Use NULL for hmm_range::dev_private_owner to migrate
such pages to system. In order to do that, move the
struct drm_gpusvm::device_private_page_owner field to
struct drm_gpusvm_ctx::device_private_page_owner so that
it doesn't remain immutable over the drm_gpusvm lifetime.
Colin Ian King [Wed, 24 Sep 2025 10:22:08 +0000 (11:22 +0100)]
drm/xe/xe_late_bind_fw: Fix missing initialization of variable offset
The variable offset is not being initialized, and it is only set inside
a for-loop if entry->name is the same as manifest_entry. In the case
where it is not initialized a non-zero check on offset is potentialy checking
a bogus uninitalized value. Fix this by initializing offset to zero.
Fixes: efa29317a553 ("drm/xe/xe_late_bind_fw: Extract and print version info") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250924102208.9216-1-colin.i.king@gmail.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Thomas Hellström [Mon, 29 Sep 2025 11:26:49 +0000 (13:26 +0200)]
drm/xe/bo: Fix an idle assertion for local bos
Before calling ttm_bo_populate() in the CPU fault path of a bo,
we assert that the bo is not being migrated. However, for
local bos we share the reservation object with other local bos
that might be in the process of being migrated. Also some VM
operations may attach USAGE_KERNEL fences to the common
reservation object and trigger false positives from the assert.
So remove the assert and instead wait for bo idle. This may
unnecessarily wait for idle in some cases but since we're
doing this wait later in the fault path anyway we might as
well do it here as well.
This fixes warnings like:
Sep 25 14:56:23 desky kernel: ------------[ cut here ]------------
Sep 25 14:56:23 desky kernel: xe 0000:03:00.0: [drm] Assertion `dma_resv_test_signaled(tbo->base.resv, DMA_RESV_USAGE_KERNEL) || (tbo->ttm && ttm_tt_is_populated(tbo->ttm))` failed!
platform: BATTLEMAGE subplatform: 1
graphics: Xe2_HPG 20.01 step A0
media: Xe2_HPM 13.01 step A1
Sep 25 14:56:23 desky kernel: WARNING: CPU: 6 PID: 24767 at drivers/gpu/drm/xe/xe_bo.c:1748 xe_bo_fault_migrate+0x1bb/0x300 [xe]
Sep 25 14:56:23 desky kernel: Modules linked in: cpuid dm_crypt xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 bridge stp llc xfrm_user xfr>
Sep 25 14:56:23 desky kernel: snd_soc_sdca snd_seq_midi prime_numbers coretemp snd_seq_midi_event drm_ttm_helper snd_hda_codec drm_buddy drm_exec snd_rawmidi snd_soc_core snd_hda_cor>
Sep 25 14:56:23 desky kernel: CPU: 6 UID: 1000 PID: 24767 Comm: steamwebhelper Tainted: G U W 6.17.0-rc7+ #32 PREEMPT(voluntary)
Sep 25 14:56:23 desky kernel: Tainted: [U]=USER, [W]=WARN
Sep 25 14:56:23 desky kernel: Hardware name: Micro-Star International Co., Ltd. MS-7D36/PRO Z690-P DDR4 (MS-7D36), BIOS A.A1 10/18/2022
Sep 25 14:56:23 desky kernel: RIP: 0010:xe_bo_fault_migrate+0x1bb/0x300 [xe]
Sep 25 14:56:23 desky kernel: Code: fa 64 29 f9 48 c7 c7 40 e0 d3 c1 51 48 c7 c1 c0 e3 d3 c1 52 4c 8b 45 c0 41 50 44 8b 4d c8 4d 89 e0 48 8b 55 a8 e8 25 27 95 ef <0f> 0b 48 83 c4 40 4>
Sep 25 14:56:23 desky kernel: RSP: 0000:ffffae1ca88c7b10 EFLAGS: 00010286
Sep 25 14:56:23 desky kernel: RAX: 0000000000000000 RBX: ffff8d7cfd7e6800 RCX: 0000000000000027
Sep 25 14:56:23 desky kernel: RDX: ffff8d845019cec8 RSI: 0000000000000001 RDI: ffff8d845019cec0
Sep 25 14:56:23 desky kernel: RBP: ffffae1ca88c7bc8 R08: 0000000000000000 R09: 0000000000000000
Sep 25 14:56:23 desky kernel: R10: 0000000000000000 R11: 0000000000000004 R12: ffffffffc1db1faa
Sep 25 14:56:23 desky kernel: R13: ffffffffc1db2ab4 R14: 0000000000000001 R15: ffffae1ca88c7bd8
Sep 25 14:56:23 desky kernel: FS: 00007fb1baf31940(0000) GS:ffff8d849c870000(0000) knlGS:0000000000000000
Sep 25 14:56:23 desky kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Sep 25 14:56:23 desky kernel: CR2: 00007fb1b2860020 CR3: 00000001705a9004 CR4: 0000000000772ef0
Sep 25 14:56:23 desky kernel: PKRU: 55555558
Sep 25 14:56:23 desky kernel: Call Trace:
Sep 25 14:56:23 desky kernel: <TASK>
Sep 25 14:56:23 desky kernel: xe_bo_cpu_fault_fastpath+0x11e/0x220 [xe]
Sep 25 14:56:23 desky kernel: xe_bo_cpu_fault+0x84/0x410 [xe]
Sep 25 14:56:23 desky kernel: ? __x64_sys_mmap+0x33/0x50
Sep 25 14:56:23 desky kernel: ? x64_sys_call+0x1b2e/0x20d0
Sep 25 14:56:23 desky kernel: ? do_syscall_64+0x9d/0x1f0
Sep 25 14:56:23 desky kernel: ? __check_object_size+0x4a/0x2e0
Sep 25 14:56:23 desky kernel: __do_fault+0x36/0x190
Sep 25 14:56:23 desky kernel: do_fault+0xcf/0x570
Sep 25 14:56:23 desky kernel: __handle_mm_fault+0x92b/0xfe0
Sep 25 14:56:23 desky kernel: ? ktime_get_mono_fast_ns+0x39/0xd0
Sep 25 14:56:23 desky kernel: handle_mm_fault+0x164/0x2c0
Sep 25 14:56:23 desky kernel: do_user_addr_fault+0x2cb/0x840
Sep 25 14:56:23 desky kernel: exc_page_fault+0x75/0x180
Sep 25 14:56:23 desky kernel: asm_exc_page_fault+0x27/0x30
Sep 25 14:56:23 desky kernel: RIP: 0033:0x7fb1bc388bb7
Sep 25 14:56:23 desky kernel: Code: 48 ff c7 48 01 fe 48 8d 54 11 80 0f 1f 84 00 00 00 00 00 c5 fe 6f 0e c5 fe 6f 56 20 c5 fe 6f 5e 40 c5 fe 6f 66 60 48 83 ee 80 <c5> fd 7f 0f c5 fd 7>
Sep 25 14:56:23 desky kernel: RSP: 002b:00007ffd7814fad8 EFLAGS: 00010207
Sep 25 14:56:23 desky kernel: RAX: 00007fb1b2860000 RBX: 0000000000000690 RCX: 00007fb1b2860000
Sep 25 14:56:23 desky kernel: RDX: 00007fb1b2860610 RSI: 0000556eda79f4c0 RDI: 00007fb1b2860020
Sep 25 14:56:23 desky kernel: RBP: 00007ffd7814fb60 R08: 0000000000000000 R09: 000000012be0e000
Sep 25 14:56:23 desky kernel: R10: 00007fb1b2860000 R11: 0000000000000246 R12: 0000556edd39a240
Sep 25 14:56:23 desky kernel: R13: 00007fb1b2dcb010 R14: 0000556eda79f420 R15: 0000000000000000
Sep 25 14:56:23 desky kernel: </TASK>
Michal Wajdeczko [Sun, 28 Sep 2025 14:00:28 +0000 (16:00 +0200)]
drm/xe/pf: Make GGTT/LMEM debugfs files per-tile
Due to initial design of the Xe debugfs, the GGTT and LMEM files
were defined on the primary GT, instead of being per-tile.
While PF provisioning code is now still maintaining GGTT and LMEM
also on the per primary-GT level, this will be refactored soon,
but we can fix debugfs layout now, as part of the new SR-IOV tree.
For backward compatibility we will provide some symlinks that can
be removed once our tools will be fully converted.
As we are making all those changes in the user facing interface,
take this as apportunity to also start replacing the "LMEM" term,
used by the SR-IOV code, with the "VRAM" term, used by Xe driver.
Michal Wajdeczko [Sun, 28 Sep 2025 14:00:26 +0000 (16:00 +0200)]
drm/xe/pf: Move SR-IOV GT debugfs files to new tree
Instead of expanding GT debugfs directories with large number of
SR-IOV files, as those are replicated per each SR-IOV function,
move them to our new debugfs tree, organized by the function.
But to avoid breaking IGT tests that use current layout, provide
symlinks which could be removed once transition period is over,
or we can we can leave them for convenience.
Michal Wajdeczko [Sun, 28 Sep 2025 14:00:25 +0000 (16:00 +0200)]
drm/xe/pf: Populate SR-IOV debugfs tree with tiles
Populate new per SR-IOV function debugfs directories with next
level directories that represent tiles. There are no files yet,
but we will continue updating that tree in upcoming patches.
Michal Wajdeczko [Sun, 28 Sep 2025 14:00:24 +0000 (16:00 +0200)]
drm/xe/pf: Create separate debugfs tree for SR-IOV files
Currently we expose debugfs files related to SR-IOV functions
together with other native files, but that approach will not
scale well as we plan to add more attributes and also expose
some of them on the per-tile basis.
Start building separate tree for SR-IOV specific debugfs files
where we can replicate similar files per every SR-IOV function:
Michal Wajdeczko [Sun, 28 Sep 2025 14:00:23 +0000 (16:00 +0200)]
drm/xe/pf: Promote PF debugfs function to its own file
In upcoming patches, we will build on the PF separate debugfs
tree for all SR-IOV related files and this new code will need
dedicated file. To minimize large diffs later, move existing
function now as-is, so any future modifications will be done
directly in target file.
Shuicheng Lin [Thu, 25 Sep 2025 02:31:46 +0000 (02:31 +0000)]
drm/xe/hw_engine_group: Fix double write lock release in error path
In xe_hw_engine_group_get_mode(), a write lock is acquired before
calling switch_mode(), which in turn invokes
xe_hw_engine_group_suspend_faulting_lr_jobs().
On failure inside xe_hw_engine_group_suspend_faulting_lr_jobs(),
the write lock is released there, and then again in
xe_hw_engine_group_get_mode(), leading to a double release.
Fix this by keeping both acquire and release operation in
xe_hw_engine_group_get_mode().
Fixes: 770bd1d34113 ("drm/xe/hw_engine_group: Ensure safe transition between execution modes") Cc: Francois Dugast <francois.dugast@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://lore.kernel.org/r/20250925023145.1203004-2-shuicheng.lin@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Lucas De Marchi [Mon, 22 Sep 2025 19:58:33 +0000 (12:58 -0700)]
drm/xe/guc: Refactor GuC load to use poll_timeout_us()
Currently there are 2 wait loops for loading GuC: one in
xe_mmio_wait32_not() and one guc_wait_ucode(). Now that there's a
generic poll_timeout_us(), refactor the code to use that to be more
readable.
Main change in behavior is that there's no exponential wait anymore:
that is now replaced by a 10msec retry.
Lucas De Marchi [Mon, 22 Sep 2025 19:58:32 +0000 (12:58 -0700)]
drm/xe/guc: Extract function to print load error
Move the error parsing and print out of guc_wait_ucode() into a helper
to clean up the wait function. Since now the `load_done != 1` condition
has a return statement, also simplify the if/else chain.
Lucas De Marchi [Mon, 22 Sep 2025 19:58:31 +0000 (12:58 -0700)]
drm/xe/guc: Drop helper to read freq
As the forcewake is already held during GuC load, there's no need to use
a helper function to call xe_guc_pc_get_cur_freq(). Just call
xe_guc_pc_get_cur_freq_fw() directly.
Lucas De Marchi [Mon, 22 Sep 2025 19:58:30 +0000 (12:58 -0700)]
drm/xe/guc_pc: Use poll_timeout_us() for waiting
Convert wait_for_pc_state() and wait_for_act_freq_limit() to
poll_timeout_us(). This brings 2 changes in behavior: Drop the
exponential wait and fix a potential much longer sleep.
usleep_range() will wait anywhere between `wait` and `wait << 1`, so
it's not correct to assume `slept += wait`. This code is not really
accurate. Pairing this with the exponential wait increase, it could be
waiting much longer than intended.
Lucas De Marchi [Wed, 24 Sep 2025 15:27:11 +0000 (08:27 -0700)]
drm/xe/configfs: Improve doc for ctx_restore* attributes
Spell out the syntax instead of only using examples. Particularly
important the <engine-class> part since that's different than
engines_allowed and may confuse users. The same batch buffer is used for
all engines of a certain class.
Cc: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Fixes: e2a9854d806e ("drm/xe/configfs: Allow to select by class only") Link: https://lore.kernel.org/r/20250924152709.659483-4-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Lucas De Marchi [Wed, 24 Sep 2025 15:27:10 +0000 (08:27 -0700)]
drm/xe/configfs: Fix engine class parsing
If mask is NULL, only the engine class should be accepted, so the
pattern string should be completely parsed. This should fix passing e.g.
rcs0 to ctx_restore_post_bb when it's only expecting the engine class.
Reported-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Closes: https://lore.kernel.org/r/20250922155544.67712-1-jonathan.cavitt@intel.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/aNJKnrCQmL9xS9Gv@stanley.mountain Fixes: e2a9854d806e ("drm/xe/configfs: Allow to select by class only") Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20250924152709.659483-3-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Matthew Auld [Fri, 19 Sep 2025 12:20:53 +0000 (13:20 +0100)]
drm/xe/uapi: loosen used tracking restriction
Currently this is hidden behind perfmon_capable() since this is
technically an info leak, given that this is a system wide metric.
However the granularity reported here is always PAGE_SIZE aligned, which
matches what the core kernel is already willing to expose to userspace
if querying how many free RAM pages there are on the system, and that
doesn't need any special privileges. In addition other drm drivers seem
happy to expose this.
The motivation here if with oneAPI where they want to use the system
wide 'used' reporting here, so not the per-client fdinfo stats. This has
also come up with some perf overlay applications wanting this
information.
Fixes: 1105ac15d2a1 ("drm/xe/uapi: restrict system wide accounting") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Joshua Santosh <joshua.santosh.ranjan@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250919122052.420979-2-matthew.auld@intel.com
Michal Wajdeczko [Mon, 22 Sep 2025 10:12:07 +0000 (12:12 +0200)]
drm/xe/tests: Fix build break on clang 16.0.6
The following error was reported when building with clang 16.0.6:
In file included from drivers/gpu/drm/xe/xe_pci.c:1104:
>> drivers/gpu/drm/xe/tests/xe_pci.c:214:2: error: initializer \
element is not a compile-time constant
graphics_ip_xelp,
^~~~~~~~~~~~~~~~
drivers/gpu/drm/xe/tests/xe_pci.c:221:2: error: initializer \
element is not a compile-time constant
media_ip_xem,
^~~~~~~~~~~~
2 errors generated.
Fix that by explicit re-definition of pre-GMDID IPs, as there are
not so many of them.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509192041.tQwdE4DS-lkp@intel.com/ Fixes: 5bb5258e357e ("drm/xe/tests: Add pre-GMDID IP descriptors to param generators") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250922101207.192028-1-michal.wajdeczko@intel.com
Michal Wajdeczko [Fri, 19 Sep 2025 16:04:30 +0000 (18:04 +0200)]
drm/xe/debugfs: Improve .show() helper for GT-based attributes
Like we did for tile-based attributes, introduce separate show()
helper that implicitly takes an RPM reference prior to the call
to the actual print() function. This translates into some savings.
Michal Wajdeczko [Fri, 19 Sep 2025 16:04:29 +0000 (18:04 +0200)]
drm/xe/debugfs: Make ggtt file per-tile
Due to initial lack of per-tile debugfs directories, the ggtt file
attribute was created as per-GT file. Fix that since now we have
proper per-tile directories.
Lucas De Marchi [Mon, 22 Sep 2025 22:11:34 +0000 (15:11 -0700)]
drm/xe/psmi: Do not return NULL
The checks for id and bo_size are impossible conditions. If they were
possible, then the caller should not be using IS_ERR(). Just replace
them with asserts which should be compiled out when not debugging and
at the same time prevent other refactors to break this assumption.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/aK1nZjyAF0s7bnHg@stanley.mountain Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250922221133.109921-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Thomas Hellström [Thu, 18 Sep 2025 14:28:48 +0000 (16:28 +0200)]
drm/xe/pm: Add lockdep annotation for the pm_block completion
Similar to how we annotate dma-fences, add lockep annotation to
the pm_block completion to ensure we don't wait for it while holding
locks that are needed in the pm notifier or in the device
suspend / resume callbacks.
Thomas Hellström [Thu, 18 Sep 2025 14:28:47 +0000 (16:28 +0200)]
drm/xe/pm: Hold the validation lock around evicting user-space bos for suspend
During pm notifier eviction we may still race with validations.
Ensure those are blocked out during eviction to ensure we have
access to as much system memory as possible.
During the suspend operation itself, we run single-threaded so that
shouldn't be a problem.
Thomas Hellström [Thu, 18 Sep 2025 09:22:07 +0000 (11:22 +0200)]
drm/xe/dma-buf: Allow pinning of p2p dma-buf
RDMA NICs typically requires the VRAM dma-bufs to be pinned in
VRAM for pcie-p2p communication, since they don't fully support
the move_notify() scheme. We would like to support that.
However allowing unaccounted pinning of VRAM creates a DOS vector
so up until now we haven't allowed it.
However with cgroups support in TTM, the amount of VRAM allocated
to a cgroup can be limited, and since also the pinned memory is
accounted as allocated VRAM we should be safe.
An analogy with system memory can be made if we observe the
similarity with kernel system memory that is allocated as the
result of user-space action and that is accounted using __GFP_ACCOUNT.
Ideally, to be more flexible, we would add a "pinned_memory",
or possibly "kernel_memory" limit to the dmem cgroups controller,
that would additionally limit the memory that is pinned in this way.
If we let that limit default to the dmem::max limit we can
introduce that without needing to care about regressions.
Considering that we already pin VRAM in this way for at least
page-table memory and LRC memory, and the above path to greater
flexibility, allow this also for dma-bufs.
v2:
- Update comments about pinning in the dma-buf kunit test
(Niranjana Vishwanathapura)
Cc: Dave Airlie <airlied@gmail.com> Cc: Simona Vetter <simona.vetter@ffwll.ch> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/20250918092207.54472-4-thomas.hellstrom@linux.intel.com
Thomas Hellström [Thu, 18 Sep 2025 09:22:05 +0000 (11:22 +0200)]
drm/xe: Don't copy pinned kernel bos twice on suspend
We were copying the bo content the bos on the list
"xe->pinned.late.kernel_bo_present" twice on suspend.
Presumingly the intent is to copy the pinned external bos on
the first pass.
This is harmless since we (currently) should have no pinned
external bos needing copy since
a) exernal system bos don't have compressed content,
b) We do not (yet) allow pinning of VRAM bos.
Still, fix this up so that we copy pinned external bos on
the first pass. We're about to allow bos pinned in VRAM.
Fixes: c6a4d46ec1d7 ("drm/xe: evict user memory in PM notifier") Cc: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v6.16+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/20250918092207.54472-2-thomas.hellstrom@linux.intel.com
Dave Airlie [Sun, 21 Sep 2025 21:42:05 +0000 (07:42 +1000)]
Merge tag 'drm-xe-next-2025-09-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Lucas De Marchi [Fri, 12 Sep 2025 21:54:51 +0000 (14:54 -0700)]
drm/xe: Fix build with CONFIG_MODULES=n
When building with CONFIG_MODULES=n, the __exit functions are dropped.
However our init functions may call them for error handling, so they are
not good candidates for the exit sections.
Fix this error reported by 0day:
ld.lld: error: relocation refers to a symbol in a discarded section: xe_configfs_exit
>>> defined in vmlinux.a(drivers/gpu/drm/xe/xe_configfs.o)
>>> referenced by xe_module.c
>>> drivers/gpu/drm/xe/xe_module.o:(init_funcs) in archive vmlinux.a
This is the only exit function using __exit. Drop it to fix the build.
Cc: Riana Tauro <riana.tauro@intel.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506092221.1FmUQmI8-lkp@intel.com/ Fixes: 16280ded45fb ("drm/xe: Add configfs to enable survivability mode") Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Link: https://lore.kernel.org/r/20250912-fix-nomodule-build-v1-1-d11b70a92516@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Lucas De Marchi [Tue, 16 Sep 2025 21:15:43 +0000 (14:15 -0700)]
drm/xe/lrc: Allow to add user commands mid context switch
Like done for post-context-restore commands, allow to add commands from
configfs in the middle of context restore. Since currently the indirect
ctx hardcodes the offset to CTX_INDIRECT_CTX_OFFSET_DEFAULT, this is
executed in the very beginning of engine context restore.
Lucas De Marchi [Tue, 16 Sep 2025 21:15:42 +0000 (14:15 -0700)]
drm/xe/lrc: Allow INDIRECT_CTX for more engine classes
Currently it's only allowed for render and compute. Going forward we
want to enable it for more engine classes. Let the XE_LRC_FLAG_INDIRECT_CTX
flag (and thus gt_engine_needs_indirect_ctx()) be the deciding factor
for its availability.
While at it, add the missing const to rcs_funcs array. Since
CTX_INDIRECT_CTX_OFFSET_DEFAULT already matches the HW default and
gt_engine_needs_indirect_ctx() only ever enables it for rcs/ccs, there
is no change in behavior, it's only preparation for future use case.
Lucas De Marchi [Tue, 16 Sep 2025 21:15:41 +0000 (14:15 -0700)]
drm/xe/configfs: Add post context restore bb
Allow the user to specify commands to execute during a context restore.
Currently it's possible to parse 2 types of actions:
- cmd: the instructions are added as is to the bb
- reg: just use the address and value, without worrying about
encoding the right LRI instruction. This is possibly the most
useful use case, so added a dedicated action for that.
This also prepares for future BBs: mid context restore and rc6 context
restore that can re-use the same parsing functions.
Lucas De Marchi [Tue, 16 Sep 2025 21:15:40 +0000 (14:15 -0700)]
drm/xe/lrc: Allow to add user commands on context switch
During validation it's useful to allows additional commands to be
executed on context switch. Fetch the commands from configfs (to be
added) and add them to the WA BB.
Lucas De Marchi [Tue, 16 Sep 2025 21:15:39 +0000 (14:15 -0700)]
drm/xe/configfs: Allow to select by class only
For a future configfs attribute, it's desirable to select by engine mask
only as the instance doesn't make sense.
Rename the function lookup_engine_mask() to lookup_engine_info() and
make it return the entry. This allows parse_engine() to still return an
item if the caller wants to allow parsing a class-only string like
"rcs", "bcs", "ccs", etc.
Matthew Schwartz [Thu, 11 Sep 2025 17:48:51 +0000 (10:48 -0700)]
drm/amd/display: Only restore backlight after amdgpu_dm_init or dm_resume
On clients that utilize AMD_PRIVATE_COLOR properties for HDR support,
brightness sliders can include a hardware controlled portion and a
gamma-based portion. This is the case on the Steam Deck OLED when using
gamescope with Steam as a client.
When a user sets a brightness level while HDR is active, the gamma-based
portion and/or hardware portion are adjusted to achieve the desired
brightness. However, when a modeset takes place while the gamma-based
portion is in-use, restoring the hardware brightness level overrides the
user's overall brightness level and results in a mismatch between what
the slider reports and the display's current brightness.
To avoid overriding gamma-based brightness, only restore HW backlight
level after boot or resume. This ensures that the backlight level is
set correctly after the DC layer resets it while avoiding interference
with subsequent modesets.
Fixes: 7875afafba84 ("drm/amd/display: Fix brightness level not retained over reboot") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551 Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guangshuo Li [Thu, 18 Sep 2025 10:57:05 +0000 (18:57 +0800)]
drm/amdgpu/atom: Check kcalloc() for WS buffer in amdgpu_atom_execute_table_locked()
kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws
remains NULL while ectx.ws_size is set, leading to a potential NULL
pointer dereference in atom_get_src_int() when accessing WS entries.
Return -ENOMEM on allocation failure to avoid the NULL dereference.
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 27 Aug 2025 09:45:45 +0000 (11:45 +0200)]
drm/amdgpu: revert to old status lock handling v3
It turned out that protecting the status of each bo_va with a
spinlock was just hiding problems instead of solving them.
Revert the whole approach, add a separate stats_lock and lockdep
assertions that the correct reservation lock is held all over the place.
This not only allows for better checks if a state transition is properly
protected by a lock, but also switching back to using list macros to
iterate over the state of lists protected by the dma_resv lock of the
root PD.
v2: re-add missing check
v3: split into two patches
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/xe/xe_late_bind_fw: Introduce debug fs node to disable late binding
Introduce a debug filesystem node to disable late binding fw reload
during the system or runtime resume. This is intended for situations
where the late binding fw needs to be loaded from user mode,
perticularly for validation purpose.
Note that xe kmd doesn't participate in late binding flow from user
space. Binary loaded from the userspace will be lost upon entering to
D3 cold hence user space app need to handle this situation.
drm/xe/xe_late_bind_fw: Load late binding firmware
Load late binding firmware
v2:
- s/EAGAIN/EBUSY/
- Flush worker in suspend and driver unload (Daniele)
v3:
- Use retry interval of 6s, in steps of 200ms, to allow
other OS components release MEI CL handle (Sasha)
v4:
- return -ENODEV if component not added (Daniele)
- parse and print status returned by csc
v5:
- Use payload to check firmware valid (Daniele)
- Obtain the RPM reference before scheduling the worker to
ensure the device remains awake until the worker completes
firmware loading (Rodrigo)
v6:
- In case of error donot re-attempt fw download (Daniele)
v7 (Rodrigo):
- Rename of mei structs and callback.
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250905154953.3974335-6-badal.nilawar@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
drm/xe/xe_late_bind_fw: Initialize late binding firmware
Search for late binding firmware binaries and populate the meta data of
firmware structures.
v2 (Daniele):
- drm_err if firmware size is more than max pay load size
- s/request_firmware/firmware_request_nowarn/ as firmware will
not be available for all possible cards
v3 (Daniele):
- init firmware from within xe_late_bind_init, propagate error
- switch late_bind_fw to array to handle multiple firmware types
v4 (Daniele):
- Alloc payload dynamically, fix nits
v6 (Daniele)
- %s/MAX_PAYLOAD_SIZE/XE_LB_MAX_PAYLOAD_SIZE/
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250905154953.3974335-5-badal.nilawar@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Introduce xe_late_bind_fw to enable firmware loading for the devices,
such as the fan controller, during the driver probe. Typically,
firmware for such devices are part of IFWI flash image but can be
replaced at probe after OEM tuning.
This patch binds mei late binding component to enable firmware loading.
v2:
- Add devm_add_action_or_reset to remove the component (Daniele)
- Add INTEL_MEI_GSC check in xe_late_bind_init() (Daniele)
v3:
- Fail driver probe if late bind initialization fails,
add has_late_bind flag (Daniele)
v4:
- %s/I915_COMPONENT_LATE_BIND/INTEL_COMPONENT_LATE_BIND/
v6:
- rebased
v7:
- rebased
- In xe_late_bind_init, use drm_err when returning an error to
stop the probe (Lucas)
- Use imperative mode in commit message (Lucas)
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250905154953.3974335-4-badal.nilawar@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Introduce a new MEI client driver to support Late Binding firmware
upload/update for Intel discrete graphics platforms.
Late Binding is a runtime firmware upload/update mechanism that allows
payloads, such as fan control and voltage regulator, to be securely
delivered and applied without requiring SPI flash updates or
system reboots. This driver enables the Xe graphics driver and other
user-space tools to push such firmware blobs to the authentication
firmware via the MEI interface.
The driver handles authentication, versioning, and communication
with the authentication firmware, which in turn coordinates with
the PUnit/PCODE to apply the payload.
This is a foundational component for enabling dynamic, secure,
and re-entrant configuration updates on platforms like Battlemage.
Cc: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250905154953.3974335-3-badal.nilawar@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add a new helper function that allows MEI client drivers
to query the maximum transmission unit (MTU) for a connected
MEI client.
This is useful for clients that need to transmit large payloads,
such as firmware blobs, allowing them to determine the maximum
message size that can be safely sent before starting transmission and
size of the buffer to allocate when receiving data.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250905154953.3974335-2-badal.nilawar@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
drm/amdgpu: add missing comment for the new argument
In function 'amdgpu_vm_lock_done_list' update the comment
for the new argument 'vm'.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509180211.UAqME0zj-lkp@intel.com/ Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 17 Sep 2025 16:42:11 +0000 (12:42 -0400)]
drm/amdgpu: suspend KFD and KGD user queues for S0ix
We need to make sure the user queues are preempted so
GFX can enter gfxoff.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: David Perry <david.perry@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 17 Sep 2025 16:42:10 +0000 (12:42 -0400)]
drm/amdgpu/userq: Optimize S0ix handling
In S0i3, GFX state is retained, so it's preferrable to
preempt queues rather than unmapping them as the overhead
is lower.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: David Perry <david.perry@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDGPU_PTE_PRT_GFX12 flag is missed during pageTable rework, add it back.
Fixes: 6716a823d18d ("drm/amdgpu: rework how PTE flags are generated v3") Signed-off-by: Joe Wang <joe.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 17 Sep 2025 16:42:09 +0000 (12:42 -0400)]
drm/amdkfd: add proper handling for S0ix
When in S0i3, the GFX state is retained, so all we need to do
is stop the runlist so GFX can enter gfxoff.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: David Perry <david.perry@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 20 Aug 2025 20:04:18 +0000 (16:04 -0400)]
drm/amdgpu: remove non-DC DCE 11 code
DC has been the default for ~8 years now and supports
many things that the non-DC code does not (audio, DP MST, etc.).
No DCE 11.x IPs ever supported analog encoders so that is not
an issue. Finally drop this code.
Acked-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Mon, 15 Sep 2025 12:28:49 +0000 (20:28 +0800)]
drm/amd/pm: Enable npm metrics data
Enable npm metrics data for smu_v13_0_12
v3: Add node id check for setting NPM_CAPS (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Fri, 29 Aug 2025 04:25:54 +0000 (12:25 +0800)]
drm/amd/pm: Fetch npm data from system metrics table
Fetch npm data from system metrics table for smu_v13_0_12
v3: Remove intermittent type for npm data, remove node id check,
move npm caps check to npm_get_data function (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Wed, 27 Aug 2025 13:22:13 +0000 (21:22 +0800)]
drm/amd/pm: Add sysfs node for node power
Add sysfs node to expose node power limit for smu_v13_0_12
v2: Remove support check from visible function (Kevin)
v3: Update comments (Kevin)
Remove sysfs remove file, change format specifier
for sysfs_emit, use attribute_group.name (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Mon, 15 Sep 2025 09:53:19 +0000 (17:53 +0800)]
drm/amd/pm: Allow system metrics table in 1vf mode
Allow fetching system metrics table in 1VF mode
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Hellström [Thu, 11 Sep 2025 08:03:24 +0000 (10:03 +0200)]
drm/xe: Work around clang multiple goto-label error
When using drm_exec_retry_on_contention(), clang may consider
all labels for which we take addresses in a function as
potential retry goto targets, although strictly only one
is possible. It will then in some situations generate false
positive errors.
In this case, the compiler, for some architectures, consider the
might_lock(&m->job_mutex);
as a potential goto target from drm_exec_retry_on_contention(),
and errors.
Work around that by moving the xe_validate / drm_exec
transaction to a separate function.
v2:
- New commit message based on analysis of Nathan Chancellor
Fixes: 59eabff2a352 ("drm/xe: Convert xe_bo_create_pin_map() for exhaustive eviction") Cc: Matthew Brost <matthew.brost@intel.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509101853.nDmyxTEM-lkp@intel.com/ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build Link: https://lore.kernel.org/r/20250911080324.180307-1-thomas.hellstrom@linux.intel.com
Michal Wajdeczko [Tue, 16 Sep 2025 17:00:29 +0000 (19:00 +0200)]
drm/xe/sysfs: Simplify sysfs registration
Instead of manually maintaining each sysfs file define and use
attribute groups and register them using device managed function.
Then use is_visible() to filter-out unsupported attributes.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250916170029.3313-3-michal.wajdeczko@intel.com
Michal Wajdeczko [Tue, 16 Sep 2025 17:00:28 +0000 (19:00 +0200)]
drm/xe/vf: Don't expose sysfs attributes not applicable for VFs
VFs can't read BMG_PCIE_CAP(0x138340) register nor access PCODE
(already guarded by the info.skip_pcode flag) so we shouldn't
expose attributes that require any of them to avoid errors like:
Fixes: 0e414bf7ad01 ("drm/xe: Expose PCIe link downgrade attributes") Fixes: cdc36b66cd41 ("drm/xe: Expose fan control and voltage regulator version") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Lukasz Laguna <lukasz.laguna@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250916170029.3313-2-michal.wajdeczko@intel.com
Shuicheng Lin [Thu, 11 Sep 2025 17:31:40 +0000 (17:31 +0000)]
drm/xe/madvise: Fix ioctl argument check
It is "preferred_mem_loc" instead of "atomic" for the ATTR_PREFERRED_LOC
path.
Also include 2 minor changes with no functional impact.
1. Remove the redundant "attr.atomic_access" assignment.
2. Replace down_read_interruptible() with
xe_svm_notifier_lock_interruptible() to pair with
xe_svm_notifier_unlock().
Fixes: ada7486c5668 ("drm/xe: Implement madvise ioctl for xe") Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://lore.kernel.org/r/20250911173139.1405878-2-shuicheng.lin@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Shuicheng Lin [Thu, 11 Sep 2025 03:14:06 +0000 (03:14 +0000)]
drm/xe: Misc refine for svm
These changes should have no functional impact.
1. Correct typo of "operation"in macro range_debug().
2. Combine 2 spin_lock() call in xe_svm_garbage_collector() into 1.
3. Drop redundant preferred_region_is_vram check in
xe_svm_range_needs_migrate_to_vram().
4. Combine the devmem_possible check in xe_svm_handle_pagefault().
need_vram includes the IS_DGFX() check, so there is no change for
.devmem_only.
v2: revert !ctx.devmem_only change (Matt)
v3: rebase code and refine commit message.
v4: rebase code and refine commit message.
Michal Wajdeczko [Tue, 16 Sep 2025 17:16:45 +0000 (19:16 +0200)]
drm/xe/tests: Add pre-GMDID IP descriptors to param generators
Recently introduced kunit parameter generators were based on
the existing arrays which have only GDMID-based IPs and didn't
take into account IP definitions from pre-GMDID era.
Add test only arrays with pre-GMDID IPs (as those will not change)
and extend param generators to start iterating over them.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250916171645.3335-1-michal.wajdeczko@intel.com
Dave Airlie [Wed, 17 Sep 2025 06:09:24 +0000 (16:09 +1000)]
Merge tag 'drm-rust-next-2025-09-16' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v6.18
Alloc
- Add BorrowedPage type and AsPageIter trait
- Implement Vmalloc::to_page() and VmallocPageIter
- Implement AsPageIter for VBox and VVec
DMA & Scatterlist
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and struct sg_table
DRM
- In the DRM GEM module, simplify overall use of generics, add
DriverFile type alias and drop Object::SIZE.
Nova (Core)
- Various register!() macro improvements (paving the way for lifting
it to common driver infrastructure)
- Minor VBios fixes and refactoring
- Minor firmware request refactoring
- Advance firmware boot stages; process Booter and patch its
signature, process GSP and GSP bootloader
- Switch development fimrware version to r570.144
- Add basic firmware bindings for r570.144
- Move GSP boot code to its own module
- Clean up and take advantage of pin-init features to store most of
the driver's private data within a single allocation
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Nova (DRM)
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Pin-Init
- Merge pin-init PR from Benno
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code
*/},` & make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via
a `let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Rust
- Various methods for AsBytes and FromBytes traits
Tyr
- Initial Rust driver skeleton for ARM Mali GPUs.
- It can power up the GPU, query for GPU metatdata through MMIO and
provide the metadata to userspace via DRM device IOCTL (struct
drm_panthor_dev_query).
Since the PXP start comes after __xe_exec_queue_init() has completed,
we need to cleanup what was done in that function in case of a PXP
start error.
__xe_exec_queue_init calls the submission backend init() function,
so we need to introduce an opposite for that. Unfortunately, while
we already have a fini() function pointer, it performs other
operations in addition to cleaning up what was done by the init().
Therefore, for clarity, the existing fini() has been renamed to
destroy(), while a new fini() has been added to only clean up what was
done by the init(), with the latter being called by the former (via
xe_exec_queue_fini).
Fixes: 72d479601d67 ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://lore.kernel.org/r/20250909221240.3711023-3-daniele.ceraolospurio@intel.com
projects / thirdparty / kernel / linux.git / log
