When done from a virtual machine, instructions that touch APIC memory
must be emulated. By convention, MMIO accesses are typically performed
via io.h helpers such as readl() or writeq() to simplify instruction
emulation/decoding (ex: in KVM hosts and SEV guests) [0].
Currently, native_apic_mem_read() does not follow this convention,
allowing the compiler to emit instructions other than the MOV
instruction generated by readl(). In particular, when the kernel is
compiled with clang and run as a SEV-ES or SEV-SNP guest, the compiler
would emit a TESTL instruction which is not supported by the SEV-ES
emulator, causing a boot failure in that environment. It is likely the
same problem would happen in a TDX guest as that uses the same
instruction emulator as SEV-ES.
To make sure all emulators can emulate APIC memory reads via MOV, use
the readl() function in native_apic_mem_read(). It is expected that any
emulator would support MOV in any addressing mode as it is the most
generic and is what is usually emitted currently.
The TESTL instruction is emitted when native_apic_mem_read() is inlined
into apic_mem_wait_icr_idle(). The emulator comes from
insn_decode_mmio() in arch/x86/lib/insn-eval.c. It's not worth it to
extend insn_decode_mmio() to support more instructions since, in theory,
the compiler could choose to output nearly any instruction for such
reads which would bloat the emulator beyond reason.
Building with clang results in the following warning:
posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.
Initialize cpu_mitigations to CPU_MITIGATIONS_OFF if the kernel is built
with CONFIG_SPECULATION_MITIGATIONS=n, as the help text quite clearly
states that disabling SPECULATION_MITIGATIONS is supposed to turn off all
mitigations by default.
│ If you say N, all mitigations will be disabled. You really
│ should know what you are doing to say so.
As is, the kernel still defaults to CPU_MITIGATIONS_AUTO, which results in
some mitigations being enabled in spite of SPECULATION_MITIGATIONS=n.
A smp_rmb() has been missed in vhost_vq_avail_empty(), spotted by
Will. Otherwise, it's not ensured the available ring entries pushed
by guest can be observed by vhost in time, leading to stale available
ring entries fetched by vhost in vhost_get_vq_desc(), as reported by
Yihuang Yu on NVidia's grace-hopper (ARM64) platform.
Add the missed smp_rmb() in vhost_vq_avail_empty(). When tx_can_batch()
returns true, it means there's still pending tx buffers. Since it might
read indices, so it still can bypass the smp_rmb() in vhost_get_vq_desc().
Note that it should be safe until vq->avail_idx is changed by commit 275bf960ac697 ("vhost: better detection of available buffers").
Fixes: 275bf960ac69 ("vhost: better detection of available buffers") Cc: <stable@kernel.org> # v4.11+ Reported-by: Yihuang Yu <yihyu@redhat.com> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240328002149.1141302-2-gshan@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The modes[] array contains pointers to modes on the connectors'
mode lists, which are protected by dev->mode_config.mutex.
Thus we need to extend modes[] the same protection or by the
time we use it the elements may already be pointing to
freed/reused memory.
Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10583 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404203336.10454-2-ville.syrjala@linux.intel.com Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We use add_root_meta_rsv and sub_root_meta_rsv to track prealloc and
pertrans reservations for subvolumes when quotas are enabled. The
convert function does not properly increment pertrans after decrementing
prealloc, so the count is not accurate.
Note: we check that the fs is not read-only to mirror the logic in
qgroup_convert_meta, which checks that before adding to the pertrans rsv.
Fixes: 8287475a2055 ("btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ENA has two types of TX queues:
- queues which only process TX packets arriving from the network stack
- queues which only process TX packets forwarded to it by XDP_REDIRECT
or XDP_TX instructions
The ena_free_tx_bufs() cycles through all descriptors in a TX queue
and unmaps + frees every descriptor that hasn't been acknowledged yet
by the device (uncompleted TX transactions).
The function assumes that the processed TX queue is necessarily from
the first category listed above and ends up using napi_consume_skb()
for descriptors belonging to an XDP specific queue.
This patch solves a bug in which, in case of a VF reset, the
descriptors aren't freed correctly, leading to crashes.
Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Missing IO completions check is called every second (HZ jiffies).
This commit fixes several issues with this check:
1. Duplicate queues check:
Max of 4 queues are scanned on each check due to monitor budget.
Once reaching the budget, this check exits under the assumption that
the next check will continue to scan the remainder of the queues,
but in practice, next check will first scan the last already scanned
queue which is not necessary and may cause the full queue scan to
last a couple of seconds longer.
The fix is to start every check with the next queue to scan.
For example, on 8 IO queues:
Bug: [0,1,2,3], [3,4,5,6], [6,7]
Fix: [0,1,2,3], [4,5,6,7]
2. Unbalanced queues check:
In case the number of active IO queues is not a multiple of budget,
there will be checks which don't utilize the full budget
because the full scan exits when reaching the last queue id.
The fix is to run every TX completion check with exact queue budget
regardless of the queue id.
For example, on 7 IO queues:
Bug: [0,1,2,3], [4,5,6], [0,1,2,3]
Fix: [0,1,2,3], [4,5,6,0], [1,2,3,4]
The budget may be lowered in case the number of IO queues is less
than the budget (4) to make sure there are no duplicate queues on
the same check.
For example, on 3 IO queues:
Bug: [0,1,2,0], [1,2,0,1]
Fix: [0,1,2], [0,1,2]
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Amit Bernstein <amitbern@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Small unsigned types are promoted to larger signed types in
the case of multiplication, the result of which may overflow.
In case the result of such a multiplication has its MSB
turned on, it will be sign extended with '1's.
This changes the multiplication result.
Code example of the phenomenon:
-------------------------------
u16 x, y;
size_t z1, z2;
Garbage collector does not take into account the risk of embryo getting
enqueued during the garbage collection. If such embryo has a peer that
carries SCM_RIGHTS, two consecutive passes of scan_children() may see a
different set of children. Leading to an incorrectly elevated inflight
count, and then a dangling pointer within the gc_inflight_list.
sockets are AF_UNIX/SOCK_STREAM
S is an unconnected socket
L is a listening in-flight socket bound to addr, not in fdtable
V's fd will be passed via sendmsg(), gets inflight count bumped
// V count=1 inflight=1
// GC candidate condition met
for u in gc_inflight_list:
if (total_refs == inflight_refs)
add u to gc_candidates
// gc_candidates={L, V}
for u in gc_candidates:
scan_children(u, dec_inflight)
// embryo (skb1) was not
// reachable from L yet, so V's
// inflight remains unchanged
__skb_queue_tail(L, skb1)
unix_state_unlock(L)
for u in gc_candidates:
if (u.inflight)
scan_children(u, inc_inflight_move_tail)
// V count=1 inflight=2 (!)
If there is a GC-candidate listening socket, lock/unlock its state. This
makes GC wait until the end of any ongoing connect() to that socket. After
flipping the lock, a possibly SCM-laden embryo is already enqueued. And if
there is another embryo coming, it can not possibly carry SCM_RIGHTS. At
this point, unix_inflight() can not happen because unix_gc_lock is already
taken. Inflight graph remains unaffected.
Previously, add_rule_fg would only add newly created rules from the
handle into the tree when they had a refcount of 1. On the other hand,
create_flow_handle tries hard to find and reference already existing
identical rules instead of creating new ones.
These two behaviors can result in a situation where create_flow_handle
1) creates a new rule and references it, then
2) in a subsequent step during the same handle creation references it
again,
resulting in a rule with a refcount of 2 that is not linked into the
tree, will have a NULL parent and root and will result in a crash when
the flow group is deleted because del_sw_hw_rule, invoked on rule
deletion, assumes node->parent is != NULL.
This happened in the wild, due to another bug related to incorrect
handling of duplicate pkt_reformat ids, which lead to the code in
create_flow_handle incorrectly referencing a just-added rule in the same
flow handle, resulting in the problem described above. Full details are
at [1].
This patch changes add_rule_fg to add new rules without parents into
the tree, properly initializing them and avoiding the crash. This makes
it more consistent with how rules are added to an FTE in
create_flow_handle.
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option") Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket") Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections") Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it
still means hlist_for_each_entry_rcu can return an item that got removed
from the list. The memory itself of such item is not freed thanks to RCU
but nothing guarantees the actual content of the memory is sane.
In particular, the reference count can be zero. This can happen if
ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry
from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all
references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough
timing, this can happen:
1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry.
2. Then, the whole ipv6_del_addr is executed for the given entry. The
reference count drops to zero and kfree_rcu is scheduled.
3. ipv6_get_ifaddr continues and tries to increments the reference count
(in6_ifa_hold).
4. The rcu is unlocked and the entry is freed.
5. The freed entry is returned.
Prevent increasing of the reference count in such case. The name
in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe.
The log_martians variable is only used in an #ifdef, causing a 'make W=1'
warning with gcc:
net/ipv4/route.c: In function 'ip_rt_send_redirect':
net/ipv4/route.c:880:13: error: variable 'log_martians' set but not used [-Werror=unused-but-set-variable]
Change the #ifdef to an equivalent IS_ENABLED() to let the compiler
see where the variable is used.
Fixes: 30038fc61adf ("net: ip_rt_send_redirect() optimization") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240408074219.3030256-2-arnd@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
NIX SQ mode and link backpressure configuration is required for
all platforms. But in current driver this code is wrongly placed
under specific platform check. This patch fixes the issue by
moving the code out of platform check.
syzbot is able to trigger an uninit-value in geneve_xmit() [1]
Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb->protocol.
If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol,
pskb_inet_may_pull() does nothing at all.
If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.
Add skb_vlan_inet_prepare() to perform a complete mac validation.
Use this in geneve for the moment, I suspect we need to adopt this
more broadly.
CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb") Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Phillip Potter <phil@philpotter.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported an illegal copy in xsk_setsockopt() [1]
Make sure to validate setsockopt() @optlen parameter.
[1]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420
Read of size 4 at addr ffff888028c6cde3 by task syz-executor.0/7549
The buggy address belongs to the object at ffff888028c6cde0
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 1 bytes to the right of
allocated 2-byte region [ffff888028c6cde0, ffff888028c6cde2)
Memory state around the buggy address: ffff888028c6cc80: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc ffff888028c6cd00: fa fc fc fc fa fc fc fc 00 fc fc fc 06 fc fc fc
>ffff888028c6cd80: fa fc fc fc fa fc fc fc fa fc fc fc 02 fc fc fc
^ ffff888028c6ce00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc ffff888028c6ce80: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
Fixes: 423f38329d26 ("xsk: add umem fill queue support and mmap") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: "Björn Töpel" <bjorn@kernel.org> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240404202738.3634547-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix bogus lockdep warnings if multiple u64_stats_sync variables are
initialized in the same file.
With CONFIG_LOCKDEP, seqcount_init() is a macro which declares:
static struct lock_class_key __key;
Since u64_stats_init() is a function (albeit an inline one), all calls
within the same file end up using the same instance, effectively treating
them all as a single lock-class.
Fixes: 9464ca650008 ("net: make u64_stats_init() a function") Closes: https://lore.kernel.org/netdev/ea1567d9-ce66-45e6-8168-ac40a47d1821@roeck-us.net/ Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240404075740.30682-1-petr@tesarici.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On startup, ovs-vswitchd probes different datapath features including
support for timeout policies. While probing, it tries to execute
certain operations with OVS_PACKET_ATTR_PROBE or OVS_FLOW_ATTR_PROBE
attributes set. These attributes tell the openvswitch module to not
log any errors when they occur as it is expected that some of the
probes will fail.
For some reason, setting the timeout policy ignores the PROBE attribute
and logs a failure anyway. This is causing the following kernel log
on each re-start of ovs-vswitchd:
kernel: Failed to associated timeout policy `ovs_test_tp'
Fix that by using the same logging macro that all other messages are
using. The message will still be printed at info level when needed
and will be rate limited, but with a net rate limiter instead of
generic printk one.
The nf_ct_set_timeout() itself will still print some info messages,
but at least this change makes logging in openvswitch module more
consistent.
Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20240403203803.2137962-1-i.maximets@ovn.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling a function through an incompatible pointer type causes breaks
kcfi, so clang warns about the assignment:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c:73:10: error: cast from 'void (*)(const void *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
73 | .fini = (void(*)(void *))kfree,
The valid_la is used to check the length requirements,
including special cases of Timer Status. If the length is
shorter than 5, that means no Duration Available is returned,
the message will be forced to be invalid.
However, the description of Duration Available in the spec
is that this parameter may be returned when these cases, or
that it can be optionally return when these cases. The key
words in the spec description are flexible choices.
Remove the special length check of Timer Status to fit the
spec which is not compulsory about that.
Signed-off-by: Nini Song <nini.song@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 'hci_req_sync_complete()', always free the previous sync
request state before assigning reference to a new one.
Reported-by: syzbot+39ec16ff6cc18b1d066d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=39ec16ff6cc18b1d066d Cc: stable@vger.kernel.org Fixes: f60cb30579d3 ("Bluetooth: Convert hci_req_sync family of function to new request API") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the MTU of one of an attached interface becomes too small to transmit
the local translation table then it must be resized to fit inside all
fragments (when enabled) or a single packet.
But if the MTU becomes too low to transmit even the header + the VLAN
specific part then the resizing of the local TT will never succeed. This
can for example happen when the usable space is 110 bytes and 11 VLANs are
on top of batman-adv. In this case, at least 116 byte would be needed.
There will just be an endless spam of
batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110)
in the log but the function will never finish. Problem here is that the
timeout will be halved all the time and will then stagnate at 0 and
therefore never be able to reduce the table even more.
There are other scenarios possible with a similar result. The number of
BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too
high to fit inside a packet. Such a scenario can therefore happen also with
only a single VLAN + 7 non-purgable addresses - requiring at least 120
bytes.
While this should be handled proactively when:
* interface with too low MTU is added
* VLAN is added
* non-purgeable local mac is added
* MTU of an attached interface is reduced
* fragmentation setting gets disabled (which most likely requires dropping
attached interfaces)
not all of these scenarios can be prevented because batman-adv is only
consuming events without the the possibility to prevent these actions
(non-purgable MAC address added, MTU of an attached interface is reduced).
It is therefore necessary to also make sure that the code is able to handle
also the situations when there were already incompatible system
configuration are present.
Cc: stable@vger.kernel.org Fixes: a19d3d85e1b8 ("batman-adv: limit local translation table max size") Reported-by: syzbot+a6a4b5bb3da165594cff@syzkaller.appspotmail.com Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
103a4908ad4d ("x86/head/64: Disable stack protection for head$(BITS).o")
kernel/head{32,64}.c are compiled with -fno-stack-protector to allow
a call to set_bringup_idt_handler(), which would otherwise have stack
protection enabled with CONFIG_STACKPROTECTOR_STRONG.
While sufficient for that case, there may still be issues with calls to
any external functions that were compiled with stack protection enabled
that in-turn make stack-protected calls, or if the exception handlers
set up by set_bringup_idt_handler() make calls to stack-protected
functions.
Subsequent patches for SEV-SNP CPUID validation support will introduce
both such cases. Attempting to disable stack protection for everything
in scope to address that is prohibitive since much of the code, like the
SEV-ES #VC handler, is shared code that remains in use after boot and
could benefit from having stack protection enabled. Attempting to inline
calls is brittle and can quickly balloon out to library/helper code
where that's not really an option.
Instead, re-enable stack protection for head32.c/head64.c, and make the
appropriate changes to ensure the segment used for the stack canary is
initialized in advance of any stack-protected C calls.
For head64.c:
- The BSP will enter from startup_64() and call into C code
(startup_64_setup_env()) shortly after setting up the stack, which
may result in calls to stack-protected code. Set up %gs early to allow
for this safely.
- APs will enter from secondary_startup_64*(), and %gs will be set up
soon after. There is one call to C code prior to %gs being setup
(__startup_secondary_64()), but it is only to fetch 'sme_me_mask'
global, so just load 'sme_me_mask' directly instead, and remove the
now-unused __startup_secondary_64() function.
For head32.c:
- BSPs/APs will set %fs to __BOOT_DS prior to any C calls. In recent
kernels, the compiler is configured to access the stack canary at
%fs:__stack_chk_guard [1], which overlaps with the initial per-cpu
'__stack_chk_guard' variable in the initial/"master" .data..percpu
area. This is sufficient to allow access to the canary for use
during initial startup, so no changes are needed there.
[1] 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular percpu variable")
[ bp: Massage commit message. ]
Suggested-by: Joerg Roedel <jroedel@suse.de> #for 64-bit %gs set up Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220307213356.2797205-24-brijesh.singh@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:
vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0
When the sd driver revalidates host-managed SMR disks, it calls
disk_set_zoned() which changes the zone_write_granularity attribute value
to the logical block size regardless of the device type. After that, the sd
driver overwrites the value in sd_zbc_read_zone() with the physical block
size, since ZBC/ZAC requires this for host-managed disks. Between the calls
to disk_set_zoned() and sd_zbc_read_zone(), there exists a window where the
attribute shows the logical block size as the zone_write_granularity value,
which is wrong for host-managed disks. The duration of the window is from
20ms to 200ms, depending on report zone command execution time.
To avoid the wrong zone_write_granularity value between disk_set_zoned()
and sd_zbc_read_zone(), modify the value not in sd_zbc_read_zone() but
just after disk_set_zoned() call.
Fixes: a805a4fa4fa3 ("block: introduce zone_write_granularity limit") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20230306063024.3376959-1-shinichiro.kawasaki@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular
percpu variable") modified the stackprotector check on 32-bit x86 to check
if gcc supports using %fs as canary. Adjust dummy-tools gcc script to pass
this new test by returning "%fs" rather than "%gs" if it detects
-mstack-protector-guard-reg=fs on command line.
Fixes: 3fb0fdb3bbe7 ("x86/stackprotector/32: Make the canary into a regular percpu variable") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The changes are similar to those given in the commit 19b070fefd0d
("VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()").
Fix filling of the msg and msg_payload in dg_info struct, which prevents a
possible "detected field-spanning write" of memcpy warning that is issued
by the tracking mechanism __fortify_memcpy_chk.
Originally, with strict in order execution, we could complete execution
only when the queue was empty. Preempt-to-busy allows replacement of an
active request that may complete before the preemption is processed by
HW. If that happens, the request is retired from the queue, but the
queue_priority_hint remains set, preventing direct submission until
after the next CS interrupt is processed.
This preempt-to-busy race can be triggered by the heartbeat, which will
also act as the power-management barrier and upon completion allow us to
idle the HW. We may process the completion of the heartbeat, and begin
parking the engine before the CS event that restores the
queue_priority_hint, causing us to fail the assertion that it is MIN.
It is necessary for the queue_priority_hint to be lower than the next
request submission upon waking up, as we rely on the hint to decide when
to kick the tasklet to submit that first request.
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") Closes: https://gitlab.freedesktop.org/drm/intel/issues/10154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240318135906.716055-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 98850e96cf811dc2d0a7d0af491caff9f5d49c1e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PAT handling won't do the right thing in COW mappings: the first PTE (or,
in fact, all PTEs) can be replaced during write faults to point at anon
folios. Reliably recovering the correct PFN and cachemode using
follow_phys() from PTEs will not work in COW mappings.
Using follow_phys(), we might just get the address+protection of the anon
folio (which is very wrong), or fail on swap/nonswap entries, failing
follow_phys() and triggering a WARN_ON_ONCE() in untrack_pfn() and
track_pfn_copy(), not properly calling free_pfn_range().
In free_pfn_range(), we either wouldn't call memtype_free() or would call
it with the wrong range, possibly leaking memory.
To fix that, let's update follow_phys() to refuse returning anon folios,
and fallback to using the stored PFN inside vma->vm_pgoff for COW mappings
if we run into that.
We will now properly handle untrack_pfn() with COW mappings, where we
don't need the cachemode. We'll have to fail fork()->track_pfn_copy() if
the first page was replaced by an anon folio, though: we'd have to store
the cachemode in the VMA to make this work, likely growing the VMA size.
For now, lets keep it simple and let track_pfn_copy() just fail in that
case: it would have failed in the past with swap/nonswap entries already,
and it would have done the wrong thing with anon folios.
Simple reproducer to trigger the WARN_ON_ONCE() in untrack_pfn():
Currently, we don't reenable the config if freezing the device failed.
For example, virtio-mem currently doesn't support suspend+resume, and
trying to freeze the device will always fail. Afterwards, the device
will no longer respond to resize requests, because it won't get notified
about config changes.
Let's fix this by re-enabling the config if freezing fails.
Fixes: 22b7050a024d ("virtio: defer config changed notifications") Cc: <stable@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240213135425.795001-1-david@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hook unregistration is deferred to the commit phase, same occurs with
hook updates triggered by the table dormant flag. When both commands are
combined, this results in deleting a basechain while leaving its hook
still registered in the core.
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit mutex should not be released during the critical section
between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC
worker could collect expired objects and get the released commit lock
within the same GC sequence.
nf_tables_module_autoload() temporarily releases the mutex to load
module dependencies, then it goes back to replay the transaction again.
Move it at the end of the abort phase after nft_gc_seq_end() is called.
Unlike early commit path stage which triggers a call to abort, an
explicit release of the batch is required on abort, otherwise mutex is
released and commit_list remains in place.
Add WARN_ON_ONCE to ensure commit_list is empty from the abort path
before releasing the mutex.
After this patch, commit_list is always assumed to be empty before
grabbing the mutex, therefore
03c1f1ef1584 ("netfilter: Cleanup nft_net->module_list from nf_tables_exit_net()")
only needs to release the pending modules for registration.
Cc: stable@vger.kernel.org Fixes: c0391b6ab810 ("netfilter: nf_tables: missing validation from the abort path") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for
device [126f:2262], which appears to be a generic VID:PID pair used for
many SSDs based on the Silicon Motion SM2262/SM2262EN controller.
Two of my SSDs with this VID:PID pair exhibit the same behavior:
* They frequently have trouble exiting the deepest power state (5),
resulting in the entire disk unresponsive.
Verified by setting nvme_core.default_ps_max_latency_us=10000 and
observing them behaving normally.
* They produce all-zero nguid and eui64 with `nvme id-ns` command.
The offending products are:
* HP SSD EX950 1TB
* HIKVISION C2000Pro 2TB
Signed-off-by: Jiawei Fu <i@ibugone.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are some actions with value 'tmp' but 'dst_addr' is checked instead.
It is obvious that a copy-paste error was made here and the value
of variable 'tmp' should be checked here.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Replace seekdir() with rewinddir() in order to fix a localized glibc bug.
One of the glibc patches that stable Gentoo is using causes an improper
directory stream positioning bug on 32bit arm. That in turn ends up as a
floating point exception in iio_generic_buffer.
The attached patch provides a fix by using an equivalent function which
should not cause trouble for other distros and is easier to reason about
in general as it obviously always goes back to to the start.
In function ring_buffer_iter_empty(), cpu_buffer->commit_page is read
while other threads may change it. It may cause the time_stamp that read
in the next line come from a different page. Use READ_ONCE() to avoid
having to reason about compiler optimizations now and in future.
The test type "make_warnings_file" should have no mandatory configuration
parameters other than the ones required by the "build" test type, because
its purpose is to create a file with build warnings that may or may not be
used by other subsequent tests. Currently, the only way to use it as a
stand-alone test is by setting POWER_CYCLE, CONSOLE, SSH_USER,
BUILD_TARGET, TARGET_IMAGE, REBOOT_TYPE and GRUB_MENU.
Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event
when Fn + R is pressed. This is intended for use to switch between the
two refresh rates.
Allocate a new KEY_REFRESH_RATE_TOGGLE keycode for it.
Add timeout to cm_destroy_id, so that userspace can trigger any data
collection that would help in analyzing the cause of delay in destroying
the cm_id.
New noinline function helps dtrace/ebpf programs to hook on to it.
Existing functionality isn't changed except triggering a probe-able new
function at every timeout interval.
We have seen cases where CM messages stuck with MAD layer (either due to
software bug or faulty HCA), leading to cm_id getting stuck in the
following call stack. This patch helps in resolving such issues faster.
This reverts commit d52848620de00cde4a3a5df908e231b8c8868250, which was
originally put in place to work around a s2idle failure on this platform
where the NVMe device was inaccessible upon resume.
After extended testing, we found that the firmware's implementation of S3
is buggy and intermittently fails to wake up the system. We need to revert
to s2idle mode.
The NVMe issue has now been solved more precisely in the commit titled
"PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge"
When the NFS client is under extreme load the rpc_wait_queue.qlen counter
can be overflowed. Here is an instant of the backlog queue overflow in a
real world environment shown by drgn helper:
There's issue as follows When do IO fault injection test:
Quota error (device dm-3): find_block_dqentry: Quota for id 101 referenced but not present
Quota error (device dm-3): qtree_read_dquot: Can't read quota structure for id 101
Quota error (device dm-3): do_check_range: Getting block 2021161007 out of range 1-186
Quota error (device dm-3): qtree_read_dquot: Can't read quota structure for id 661
Now, ext4_write_dquot()/ext4_acquire_dquot()/ext4_release_dquot() may commit
inconsistent quota data even if process failed. This may lead to filesystem
corruption.
To ensure filesystem consistent when errors=remount-ro there is need to call
ext4_handle_error() to abort journal.
If one group is marked as block bitmap corrupted, its free blocks cannot
be used and its free count is also deducted from the global
sbi->s_freeclusters_counter. User might be confused about the absent
free space because we can't query the information about corrupted block
groups except unreliable error messages in syslog. So add a hint to show
block bitmap corrupted groups in mb_groups.
I have a CD copy of the original Tom Clancy's Ghost Recon game from
2001. The disc mounts without error on Windows, but on Linux mounting
fails with the message "isofs_fill_super: get root inode failed". The
error originates in isofs_read_inode, which returns -EIO because de_len
is 0. The superblock on this disc appears to be intentionally corrupt as
a form of copy protection.
When the root inode is unusable, instead of giving up immediately, try
to continue with the Joliet file table. This fixes the Ghost Recon CD
and probably other copy-protected CDs too.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240208022134.451490-1-alexhenrie24@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an
unsuccessful status. In such cases, the elsiocb is not issued, the
completion is not called, and thus the elsiocb resource is leaked.
Check return value after calling lpfc_sli4_resume_rpi() and conditionally
release the elsiocb resource.
Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-3-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot is reporting sleep in atomic context in SysV filesystem [1], for
sb_bread() is called with rw_spinlock held.
A "write_lock(&pointers_lock) => read_lock(&pointers_lock) deadlock" bug
and a "sb_bread() with write_lock(&pointers_lock)" bug were introduced by
"Replace BKL for chain locking with sysvfs-private rwlock" in Linux 2.5.12.
Then, "[PATCH] err1-40: sysvfs locking fix" in Linux 2.6.8 fixed the
former bug by moving pointers_lock lock to the callers, but instead
introduced a "sb_bread() with read_lock(&pointers_lock)" bug (which made
this problem easier to hit).
Al Viro suggested that why not to do like get_branch()/get_block()/
find_shared() in Minix filesystem does. And doing like that is almost a
revert of "[PATCH] err1-40: sysvfs locking fix" except that get_branch()
from with find_shared() is called without write_lock(&pointers_lock).
If the number of provided enum IDs in a variable width config register
description does not match the expected number, the checker uses the
expected number for validating the individual enum IDs.
However, this may cause out-of-bounds accesses on the array holding the
enum IDs, leading to bogus enum_id conflict warnings. Worse, if the bug
is an incorrect bit field description (e.g. accidentally using "12"
instead of "-12" for a reserved field), thousands of warnings may be
printed, overflowing the kernel log buffer.
Fix this by limiting the enum ID check to the number of provided enum
IDs.
While input core can work with input->phys set to NULL userspace might
depend on it, so better fail probing if allocation fails. The system must
be in a pretty bad shape for it to happen anyway.
If hci_cmd_sync_complete() is triggered and skb is NULL, then
hdev->req_skb is NULL, which will cause this issue.
Reported-and-tested-by: syzbot+830d9e3fa61968246abd@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Many syzbot reports show extreme rtnl pressure, and many of them hint
that smc acquires rtnl in netns creation for no good reason [1]
This patch returns early from smc_pnet_net_init()
if there is no netdevice yet.
I am not even sure why smc_pnet_create_pnetids_list() even exists,
because smc_pnet_netdev_event() is also calling
smc_pnet_add_base_pnetid() when handling NETDEV_UP event.
The get_parent handler looks up a parent of a given dentry, this can be
either a subvolume or a directory. The search is set up with offset -1
but it's never expected to find such item, as it would break allowed
range of inode number or a root id. This means it's a corruption (ext4
also returns this error code).
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The unhandled case in btrfs_relocate_sys_chunks() loop is a corruption,
as it could be caused only by two impossible conditions:
- at first the search key is set up to look for a chunk tree item, with
offset -1, this is an inexact search and the key->offset will contain
the correct offset upon a successful search, a valid chunk tree item
cannot have an offset -1
- after first successful search, the found_key corresponds to a chunk
item, the offset is decremented by 1 before the next loop, it's
impossible to find a chunk item there due to alignment and size
constraints
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In function get_pkg_num() if fopen_or_die() succeeds it returns a file
pointer to be used. But fclose() is never called before returning from
the function.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
We claim to have the AdminQ on our irq0 and thus cpu id 0,
but we need to be sure we set the affinity hint to try to
keep it there.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the kernel crashes in a context where printk() calls always
defer printing (such as in NMI or inside a printk_safe section)
then the final panic messages will be deferred to irq_work. But
if irq_work is not available, the messages will not get printed
unless explicitly flushed. The result is that the final
"end Kernel panic" banner does not get printed.
Add one final flush after the last printk() call to make sure
the final panic messages make it out as well.
In 'ath_ant_try_scan()', (most likely) the 2nd LNA's signal
strength should be used in comparison against RSSI when
selecting first LNA as the main one. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231211172502.25202-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
To be used for adding asm functions to the ignore list. The "aw" is
needed to help the ELF section metadata match GCC-created sections.
Otherwise the linker creates duplicate sections instead of combining
them.
Add CPUID_LNX_5 to track cpufeatures' word 21, and add the appropriate
compile-time assert in KVM to prevent direct lookups on the features in
CPUID_LNX_5. KVM uses X86_FEATURE_* flags to manage guest CPUID, and so
must translate features that are scattered by Linux from the Linux-defined
bit to the hardware-defined bit, i.e. should never try to directly access
scattered features in guest CPUID.
Opportunistically add NR_CPUID_WORDS to enum cpuid_leafs, along with a
compile-time assert in KVM's CPUID infrastructure to ensure that future
additions update cpuid_leafs along with NCAPINTS.
No functional change intended.
Fixes: 7f274e609f3d ("x86/cpufeatures: Add new word for scattered features") Cc: Sandipan Das <sandipan.das@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current MPTCP servers increment MPTcpExtMPCapableFallbackACK when they
accept non-MPC connections. As reported by Christoph, this is "surprising"
because the counter might become greater than MPTcpExtMPCapableSYNRX.
MPTcpExtMPCapableFallbackACK counter's name suggests it should only be
incremented when a connection was seen using MPTCP options, then a
fallback to TCP has been done. Let's do that by incrementing it when
the subflow context of an inbound MPC connection attempt is dropped.
Also, update mptcp_connect.sh kselftest, to ensure that the
above MIB does not increment in case a pure TCP client connects to a
MPTCP server.
Fixes: fc518953bc9c ("mptcp: add and use MIB counter infrastructure") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/449 Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-1-324a8981da48@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The srso_alias_untrain_ret() dummy thunk in the !CONFIG_MITIGATION_SRSO
case is there only for the altenative in CALL_UNTRAIN_RET to have
a symbol to resolve.
However, testing with kernels which don't have CONFIG_MITIGATION_SRSO
enabled, leads to the warning in patch_return() to fire:
missing return thunk: srso_alias_untrain_ret+0x0/0x10-0x0: eb 0e 66 66 2e
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/alternative.c:826 apply_returns (arch/x86/kernel/alternative.c:826
Put in a plain "ret" there so that gcc doesn't put a return thunk in
in its place which special and gets checked.
The original version of the mitigation would patch in the calls to the
untraining routines directly. That is, the alternative() in UNTRAIN_RET
will patch in the CALL to srso_alias_untrain_ret() directly.
However, even if commit e7c25c441e9e ("x86/cpu: Cleanup the untrain
mess") meant well in trying to clean up the situation, due to micro-
architectural reasons, the untraining routine srso_alias_untrain_ret()
must be the target of a CALL instruction and not of a JMP instruction as
it is done now.
Reshuffle the alternative macros to accomplish that.
Align system call table on 8 bytes. With sys_call_table entry size
of 8 bytes that eliminates the possibility of a system call pointer
crossing cache line boundary.
In the following sequence:
1) of_platform_depopulate()
2) of_overlay_remove()
During the step 1, devices are destroyed and devlinks are removed.
During the step 2, OF nodes are destroyed but
__of_changeset_entry_destroy() can raise warnings related to missing
of_node_put():
ERROR: memory leak, expected refcount 1 instead of 2 ...
Indeed, during the devlink removals performed at step 1, the removal
itself releasing the device (and the attached of_node) is done by a job
queued in a workqueue and so, it is done asynchronously with respect to
function calls.
When the warning is present, of_node_put() will be called but wrongly
too late from the workqueue job.
In order to be sure that any ongoing devlink removals are done before
the of_node destruction, synchronize the of_changeset_destroy() with the
devlink removals.
The commit 80dd33cf72d1 ("drivers: base: Fix device link removal")
introduces a workqueue to release the consumer and supplier devices used
in the devlink.
In the job queued, devices are release and in turn, when all the
references to these devices are dropped, the release function of the
device itself is called.
Nothing is present to provide some synchronisation with this workqueue
in order to ensure that all ongoing releasing operations are done and
so, some other operations can be started safely.
For instance, in the following sequence:
1) of_platform_depopulate()
2) of_overlay_remove()
During the step 1, devices are released and related devlinks are removed
(jobs pushed in the workqueue).
During the step 2, OF nodes are destroyed but, without any
synchronisation with devlink removal jobs, of_overlay_remove() can raise
warnings related to missing of_node_put():
ERROR: memory leak, expected refcount 1 instead of 2
Indeed, the missing of_node_put() call is going to be done, too late,
from the workqueue job execution.
Introduce device_link_wait_removal() to offer a way to synchronize
operations waiting for the end of devlink removals (i.e. end of
workqueue jobs).
Also, as a flushing operation is done on the workqueue, the workqueue
used is moved from a system-wide workqueue to a local one.
This patch addresses an issue with the Panasonic CF-SZ6's existing quirk,
specifically its headset microphone functionality. Previously, the quirk
used ALC269_FIXUP_HEADSET_MODE, which does not support the CF-SZ6's design
of a single 3.5mm jack for both mic and audio output effectively. The
device uses pin 0x19 for the headset mic without jack detection.
Following verification on the CF-SZ6 and discussions with the original
patch author, i determined that the update to
ALC269_FIXUP_ASPIRE_HEADSET_MIC is the appropriate solution. This change
is custom-designed for the CF-SZ6's unique hardware setup, which includes
a single 3.5mm jack for both mic and audio output, connecting the headset
microphone to pin 0x19 without the use of jack detection.
Fixes: 0fca97a29b83 ("ALSA: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk") Signed-off-by: I Gede Agastya Darma Laksana <gedeagas22@gmail.com> Cc: <stable@vger.kernel.org>
Message-ID: <20240401174602.14133-1-gedeagas22@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The myrb and myrs drivers use an odd way of implementing their sysfs files,
calling snprintf() with a fixed length of 32 bytes to print into a page
sized buffer. One of the strings is actually longer than 32 bytes, which
clang can warn about:
drivers/scsi/myrb.c:1906:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation]
drivers/scsi/myrs.c:1089:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation]
These could all be plain sprintf() without a length as the buffer is always
long enough. On the other hand, sysfs files should not be overly long
either, so just double the length to make sure the longest strings don't
get truncated here.
gcc warns about a memcpy() with overlapping pointers because of an
incorrect size calculation:
In file included from include/linux/string.h:369,
from drivers/ata/sata_sx4.c:66:
In function 'memcpy_fromio',
inlined from 'pdc20621_get_from_dimm.constprop' at drivers/ata/sata_sx4.c:962:2:
include/linux/fortify-string.h:97:33: error: '__builtin_memcpy' accessing 4294934464 bytes at offsets 0 and [16, 16400] overlaps 6442385281 bytes at offset -2147450817 [-Werror=restrict]
97 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:620:9: note: in expansion of macro '__underlying_memcpy'
620 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:665:26: note: in expansion of macro '__fortify_memcpy_chk'
665 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
include/asm-generic/io.h:1184:9: note: in expansion of macro 'memcpy'
1184 | memcpy(buffer, __io_virt(addr), size);
| ^~~~~~
The problem here is the overflow of an unsigned 32-bit number to a
negative that gets converted into a signed 'long', keeping a large
positive number.
Replace the complex calculation with a more readable min() variant
that avoids the warning.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In snd_soc_info_volsw(), mask is generated by figuring out the index of
the most significant bit set in max and converting the index to a
bitmask through bit shift 1. Unintended wraparound occurs when max is an
integer value with msb bit set. Since the bit shift value 1 is treated
as an integer type, the left shift operation will wraparound and set
mask to 0 instead of all 1's. In order to fix this, we type cast 1 as
`1ULL` to prevent the wraparound.
Fixes: 7077148fb50a ("ASoC: core: Split ops out of soc-core.c") Signed-off-by: Stephen Lee <slee08177@gmail.com> Link: https://msgid.link/r/20240326010131.6211-1-slee08177@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Several Qualcomm Bluetooth controllers lack persistent storage for the
device address and instead one can be provided by the boot firmware
using the 'local-bd-address' devicetree property.
The Bluetooth bindings clearly states that the address should be
specified in little-endian order, but due to a long-standing bug in the
Qualcomm driver which reversed the address some boot firmware has been
providing the address in big-endian order instead.
The boot firmware in SC7180 Trogdor Chromebooks is known to be affected
so mark the 'local-bd-address' property as broken to maintain backwards
compatibility with older firmware when fixing the underlying driver bug.
Note that ChromeOS always updates the kernel and devicetree in lockstep
so that there is no need to handle backwards compatibility with older
devicetrees.
Fixes: 7ec3e67307f8 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt") Cc: stable@vger.kernel.org # 5.10 Cc: Rob Clark <robdclark@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The TX queue should be serviced each time the poll function is called,
even if the full RX work budget has been consumed. This prevents
starvation of the TX queue when RX bandwidth usage is high.
When rx-udp-gro-forwarding is enabled UDP packets might be GROed when
being forwarded. If such packets might land in a tunnel this can cause
various issues and udp_gro_receive makes sure this isn't the case by
looking for a matching socket. This is performed in
udp4/6_gro_lookup_skb but only in the current netns. This is an issue
with tunneled packets when the endpoint is in another netns. In such
cases the packets will be GROed at the UDP level, which leads to various
issues later on. The same thing can happen with rx-gro-list.
We saw this with geneve packets being GROed at the UDP level. In such
case gso_size is set; later the packet goes through the geneve rx path,
the geneve header is pulled, the offset are adjusted and frag_list skbs
are not adjusted with regard to geneve. When those skbs hit
skb_fragment, it will misbehave. Different outcomes are possible
depending on what the GROed skbs look like; from corrupted packets to
kernel crashes.
One example is a BUG_ON[1] triggered in skb_segment while processing the
frag_list. Because gso_size is wrong (geneve header was pulled)
skb_segment thinks there is "geneve header size" of data in frag_list,
although it's in fact the next packet. The BUG_ON itself has nothing to
do with the issue. This is only one of the potential issues.
Looking up for a matching socket in udp_gro_receive is fragile: the
lookup could be extended to all netns (not speaking about performances)
but nothing prevents those packets from being modified in between and we
could still not find a matching socket. It's OK to keep the current
logic there as it should cover most cases but we also need to make sure
we handle tunnel packets being GROed too early.
This is done by extending the checks in udp_unexpected_gso: GSO packets
lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must
be segmented.
[1] kernel BUG at net/core/skbuff.c:4408!
RIP: 0010:skb_segment+0xd2a/0xf70
__udp_gso_segment+0xaa/0x560
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.") Fixes: 36707061d6ba ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
