Inside nocow_one_range(), if the checksum cloning for data reloc inode
failed, we call btrfs_cleanup_ordered_extents() to cleanup the just
allocated ordered extents.
But unlike extent_clear_unlock_delalloc(),
btrfs_cleanup_ordered_extents() requires a length, not an inclusive end
bytenr.
This can be problematic, as the @end is normally way larger than @len.
This means btrfs_cleanup_ordered_extents() can be called on folios
out of the correct range, and if the out-of-range folio is under
writeback, we can incorrectly clear the ordered flag of the folio, and
trigger the DEBUG_WARN() inside btrfs_writepage_cow_fixup().
Fix the wrong parameter with correct length instead.
Fixes: 94f6c5c17e52 ("btrfs: move ordered extent cleanup to where they are allocated") CC: stable@vger.kernel.org # 6.15+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We call btrfs_zone_finish_one_bg() to zone finish one block group and make
room to activate another block group. Currently, we can choose a metadata
block group as a target. But, as we reserve an active metadata block group,
we no longer want to select a metadata block group. So, skip it in the
loop.
CC: stable@vger.kernel.org # 6.6+ Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we only log an error message if we can't find the block group
for a log tree extent buffer when unaccounting it (while freeing a log
tree). A missing block group means something is seriously wrong and we
end up leaking space from the metadata space info. So return -ENOENT in
case we don't find the block group.
CC: stable@vger.kernel.org # 6.12+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
Currently holes are sent as writes full of zeroes, which results in
unnecessarily using disk space at the receiving end and increasing the
stream size.
In some cases we avoid sending writes of zeroes, like during a full
send operation where we just skip writes for holes.
But for some cases we fill previous holes with writes of zeroes too, like
in this scenario:
1) We have a file with a hole in the range [2M, 3M), we snapshot the
subvolume and do a full send. The range [2M, 3M) stays as a hole at
the receiver since we skip sending write commands full of zeroes;
2) We punch a hole for the range [3M, 4M) in our file, so that now it
has a 2M hole in the range [2M, 4M), and snapshot the subvolume.
Now if we do an incremental send, we will send write commands full
of zeroes for the range [2M, 4M), removing the hole for [2M, 3M) at
the receiver.
We could improve cases such as this last one by doing additional
comparisons of file extent items (or their absence) between the parent
and send snapshots, but that's a lot of code to add plus additional CPU
and IO costs.
Since the send stream v2 already has a fallocate command and btrfs-progs
implements a callback to execute fallocate since the send stream v2
support was added to it, update the kernel to use fallocate for punching
holes for V2+ streams.
Test coverage is provided by btrfs/284 which is a version of btrfs/007
that exercises send stream v2 instead of v1, using fsstress with random
operations and fssum to verify file contents.
Link: https://github.com/kdave/btrfs-progs/issues/1001 CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we failed to insert the tree mod log operation, we are not removing the
dirty status from the allocated and dirtied extent buffer before we free
it. Removing the dirty status is needed for several reasons such as to
adjust the fs_info->dirty_metadata_bytes counter and remove the dirty
status from the respective folios. So add the missing call to
btrfs_clear_buffer_dirty().
Fixes: f61aa7ba08ab ("btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()") CC: stable@vger.kernel.org # 6.6+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During log replay, at add_inode_ref(), if we have an extref item that
contains multiple extrefs and one of them points to a directory that does
not exist in the subvolume tree, we are supposed to ignore it and process
the remaining extrefs encoded in the extref item, since each extref can
point to a different parent inode. However when that happens we just
return from the function and ignore the remaining extrefs.
The problem has been around since extrefs were introduced, in commit f186373fef00 ("btrfs: extended inode refs"), but it's hard to hit in
practice because getting extref items encoding multiple extref requires
getting a hash collision when computing the offset of the extref's
key. The offset if computed like this:
When quotas are disabled qgroup ioctls are supposed to return -ENOTCONN,
but the qgroup create ioctl stopped doing that when it races with a quota
disable operation, returning 0 instead. This change of behaviour happened
in commit 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot
creation").
The issue happens as follows:
1) Task A enters btrfs_ioctl_qgroup_create(), qgroups are enabled and so
qgroup_enabled() returns true since fs_info->quota_root is not NULL;
2) Task B enters btrfs_ioctl_quota_ctl() -> btrfs_quota_disable() and
disables qgroups, so now fs_info->quota_root is NULL;
3) Task A enters btrfs_create_qgroup() and calls btrfs_qgroup_mode(),
which returns BTRFS_QGROUP_MODE_DISABLED since quotas are disabled,
and then btrfs_create_qgroup() returns 0 to the caller, which makes
the ioctl return 0 instead of -ENOTCONN.
The check for fs_info->quota_root and returning -ENOTCONN if it's NULL
is made only after the call btrfs_qgroup_mode().
Fix this by moving the check for disabled quotas with btrfs_qgroup_mode()
into transaction.c:create_pending_snapshot(), so that we don't abort the
transaction if btrfs_create_qgroup() returns -ENOTCONN and quotas are
disabled.
Fixes: 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot creation") CC: stable@vger.kernel.org # 6.12+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
btrfs_uring_encoded_read() returns early with -ENOTTY if the uring_cmd
is issued with IO_URING_F_COMPAT but the kernel doesn't support compat
syscalls. However, this early return bypasses the syscall accounting.
Go to out_acct instead to ensure the syscall is counted.
[TEST FAILURE WITH EXPERIMENTAL FEATURES]
When running test case generic/508, the test case will fail with the new
btrfs shutdown support:
generic/508 - output mismatch (see /home/adam/xfstests/results//generic/508.out.bad)
# --- tests/generic/508.out 2022-05-11 11:25:30.806666664 +0930
# +++ /home/adam/xfstests/results//generic/508.out.bad 2025-07-02 14:53:22.401824212 +0930
# @@ -1,2 +1,6 @@
# QA output created by 508
# Silence is golden
# +Before:
# +After : stat.btime = Thu Jan 1 09:30:00 1970
# +Before:
# +After : stat.btime = Wed Jul 2 14:53:22 2025
# ...
# (Run 'diff -u /home/adam/xfstests/tests/generic/508.out /home/adam/xfstests/results//generic/508.out.bad' to see the entire diff)
Ran: generic/508
Failures: generic/508
Failed 1 of 1 tests
Please note that the test case requires shutdown support, thus the test
case will be skipped using the current upstream kernel, as it doesn't
have shutdown ioctl support.
[CAUSE]
The direct cause the 0 time stamp in the log tree:
There's a race between a task disabling quotas and another running the
rescan ioctl that can result in a use-after-free of qgroup records from
the fs_info->qgroup_tree rbtree.
This happens as follows:
1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan();
2) Task B enters btrfs_quota_disable() and calls
btrfs_qgroup_wait_for_completion(), which does nothing because at that
point fs_info->qgroup_rescan_running is false (it wasn't set yet by
task A);
3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups
from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock;
4) Task A enters qgroup_rescan_zero_tracking() which starts iterating
the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock,
but task B is freeing qgroup records from that tree without holding
the lock, resulting in a use-after-free.
Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config().
Also at btrfs_qgroup_rescan() don't start the rescan worker if quotas
were already disabled.
Reported-by: cen zhang <zzzccc427@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAFRLqsV+cMDETFuzqdKSHk_FDm6tneea45krsHqPD6B3FetLpQ@mail.gmail.com/ CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the ssd_spread mount option is enabled, then we run the so called
clustered allocator for data block groups. In practice, this results in
creating a btrfs_free_cluster which caches a block_group and borrows its
free extents for allocation.
Since the introduction of allocation size classes in 6.1, there has been
a bug in the interaction between that feature and ssd_spread.
find_free_extent() has a number of nested loops. The loop going over the
allocation stages, stored in ffe_ctl->loop and managed by
find_free_extent_update_loop(), the loop over the raid levels, and the
loop over all the block_groups in a space_info. The size class feature
relies on the block_group loop to ensure it gets a chance to see a
block_group of a given size class. However, the clustered allocator
uses the cached cluster block_group and breaks that loop. Each call to
do_allocation() will really just go back to the same cached block_group.
Normally, this is OK, as the allocation either succeeds and we don't
want to loop any more or it fails, and we clear the cluster and return
its space to the block_group.
But with size classes, the allocation can succeed, then later fail,
outside of do_allocation() due to size class mismatch. That latter
failure is not properly handled due to the highly complex multi loop
logic. The result is a painful loop where we continue to allocate the
same num_bytes from the cluster in a tight loop until it fails and
releases the cluster and lets us try a new block_group. But by then, we
have skipped great swaths of the available block_groups and are likely
to fail to allocate, looping the outer loop. In pathological cases like
the reproducer below, the cached block_group is often the very last one,
in which case we don't perform this tight bg loop but instead rip
through the ffe stages to LOOP_CHUNK_ALLOC and allocate a chunk, which
is now the last one, and we enter the tight inner loop until an
allocation failure. Then allocation succeeds on the final block_group
and if the next allocation is a size mismatch, the exact same thing
happens again.
Triggering this is as easy as mounting with -o ssd_spread and then
running:
if you do the two writes + sync in a loop, you can force btrfs to spin
an excessive amount on semi-successful clustered allocations, before
ultimately failing and advancing to the stage where we force a chunk
allocation. This results in 2G of data allocated per iteration, despite
only using ~20M of data. By using a small size classed extent, the inner
loop takes longer and we can spin for longer.
The simplest, shortest term fix to unbreak this is to make the clustered
allocator size_class aware in the dumbest way, where it fails on size
class mismatch. This may hinder the operation of the clustered
allocator, but better hindered than completely broken and terribly
overallocating.
Further re-design improvements are also in the works.
Fixes: 52bb7a2166af ("btrfs: introduce size class to block group allocator") CC: stable@vger.kernel.org # 6.1+ Reported-by: David Sterba <dsterba@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During log replay, at add_inode_ref(), we return -ENOENT if our current
inode isn't found on the subvolume tree or if a parent directory isn't
found. The error comes from btrfs_iget_logging() <- btrfs_iget() <-
btrfs_read_locked_inode().
The single caller of add_inode_ref(), replay_one_buffer(), ignores an
-ENOENT error because it expects that error to mean only that a parent
directory wasn't found and that is ok.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling during
log replay") we were converting any error when getting a parent directory
to -ENOENT and any error when getting the current inode to -EIO, so our
caller would fail log replay in case we can't find the current inode.
After that commit however in case the current inode is not found we return
-ENOENT to the caller and therefore it ignores the critical fact that the
current inode was not found in the subvolume tree.
Fix this by converting -ENOENT to 0 when we don't find a parent directory,
returning -ENOENT when we don't find the current inode and making the
caller, replay_one_buffer(), not ignore -ENOENT anymore.
Fixes: 5f61b961599a ("btrfs: fix inode lookup error handling during log replay") CC: stable@vger.kernel.org # 6.16 Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before waiting for the rescan worker to finish and flushing reservations,
we clear the BTRFS_FS_QUOTA_ENABLED flag from fs_info. If we fail flushing
reservations we leave with the flag not set which is not correct since
quotas are still enabled - we must set back the flag on error paths, such
as when we fail to start a transaction, except for error paths that abort
a transaction. The reservation flushing happens very early before we do
any operation that actually disables quotas and before we start a
transaction, so set back BTRFS_FS_QUOTA_ENABLED if it fails.
Fixes: af0e2aab3b70 ("btrfs: qgroup: flush reservations during quota disable") CC: stable@vger.kernel.org # 6.12+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some reports of "unable to find chunk map for logical 2147483648
length 16384" error message appears in dmesg. This means some IOs are
occurring after a block group is removed.
When a metadata tree node is cleaned on a zoned setup, we keep that node
still dirty and write it out not to create a write hole. However, this can
make a block group's used bytes == 0 while there is a dirty region left.
Such an unused block group is moved into the unused_bg list and processed
for removal. When the removal succeeds, the block group is removed from the
transaction->dirty_bgs list, so the unused dirty nodes in the block group
are not sent at the transaction commit time. It will be written at some
later time e.g, sync or umount, and causes "unable to find chunk map"
errors.
This can happen relatively easy on SMR whose zone size is 256MB. However,
calling do_zone_finish() on such block group returns -EAGAIN and keep that
block group intact, which is why the issue is hidden until now.
Fixes: afba2bc036b0 ("btrfs: zoned: implement active zone tracking") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we failed walking a log tree during replay, we have a missing
transaction abort to prevent committing a transaction where we didn't
fully replay all the changes from a log tree and therefore can leave the
respective subvolume tree in some inconsistent state. So add the missing
transaction abort.
CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When deciding if a zoned filesystem is reaching the threshold to reclaim
data block groups, look at the size of the filesystem not to potentially
total available size of all drives in the filesystem.
Especially if a filesystem was created with mkfs' -b option, constraining
it to only a portion of the block device, the numbers won't match and
potentially garbage collection is kicking in too late.
Fixes: 3687fcb0752a ("btrfs: zoned: make auto-reclaim less aggressive") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the devices that need their endpoints to get an
initial clear_halt, this needs to be done before
the devices can be opened. That means it needs to be
before the devices are registered.
Fixes: 15bf722e6f6c0 ("cdc-acm: Add support of ATOL FPrint fiscal printers") Cc: stable <stable@kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20250717141259.2345605-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.
I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:
1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
(tcpm_set_pd_rx is enabled again, even though it is still on)
At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.
I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.
Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)
As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:
On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.
syzbot reports a use-after-free in comedi in the below link, which is
due to comedi gladly removing the allocated async area even though poll
requests are still active on the wait_queue_head inside of it. This can
cause a use-after-free when the poll entries are later triggered or
removed, as the memory for the wait_queue_head has been freed. We need
to check there are no tasks queued on any of the subdevices' wait queues
before allowing the device to be detached by the `COMEDI_DEVCONFIG`
ioctl.
Tasks will read-lock `dev->attach_lock` before adding themselves to the
subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl
handler by write-locking `dev->attach_lock` before checking that all of
the subdevices are safe to be deleted. This includes testing for any
sleepers on the subdevices' wait queues. It remains locked until the
device has been detached. This requires the `comedi_device_detach()`
function to be refactored slightly, moving the bulk of it into new
function `comedi_device_detach_locked()`.
Note that the refactor of `comedi_device_detach()` results in
`comedi_device_cancel_all()` now being called while `dev->attach_lock`
is write-locked, which wasn't the case previously, but that does not
matter.
Thanks to Jens Axboe for diagnosing the problem and co-developing this
patch.
The current power direction of an USB-C port also influences the
power_supply's online status, so a power role change should also update
the power_supply.
Fixes an issue on some systems where plugging in a normal USB device in
for the first time after a reboot will cause upower to erroneously
consider the system to be connected to AC power.
When a card is present in the reader, the driver currently defers
autosuspend by returning -EAGAIN during the suspend callback to
trigger USB remote wakeup signaling. However, this does not guarantee
that the mmc child device has been resumed, which may cause issues if
it remains suspended while the card is accessible.
This patch ensures that all child devices, including the mmc host
controller, are explicitly resumed before returning -EAGAIN. This
fixes a corner case introduced by earlier remote wakeup handling,
improving reliability of runtime PM when a card is inserted.
Fixes: 883a87ddf2f1 ("misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection") Cc: stable@vger.kernel.org Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250711140143.2105224-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Various changes in the "ext4: better scalability for ext4 block
allocation" patch series have resulted in kunit test failures, most
notably in the test_new_blocks_simple and the test_mb_mark_used tests.
The root cause of these failures is that various in-memory ext4 data
structures were not getting initialized, and while previous versions
of the functions exercised by the unit tests didn't use these
structure members, this was arguably a test bug.
Since one of the patches in the block allocation scalability patches
is a fix which is has a cc:stable tag, this commit also has a
cc:stable tag.
The grp->bb_largest_free_order is updated regardless of whether
mb_optimize_scan is enabled. This can lead to inconsistencies between
grp->bb_largest_free_order and the actual s_mb_largest_free_orders list
index when mb_optimize_scan is repeatedly enabled and disabled via remount.
For example, if mb_optimize_scan is initially enabled, largest free
order is 3, and the group is in s_mb_largest_free_orders[3]. Then,
mb_optimize_scan is disabled via remount, block allocations occur,
updating largest free order to 2. Finally, mb_optimize_scan is re-enabled
via remount, more block allocations update largest free order to 1.
At this point, the group would be removed from s_mb_largest_free_orders[3]
under the protection of s_mb_largest_free_orders_locks[2]. This lock
mismatch can lead to list corruption.
To fix this, whenever grp->bb_largest_free_order changes, we now always
attempt to remove the group from its old order list. However, we only
insert the group into the new order list if `mb_optimize_scan` is enabled.
This approach helps prevent lock inconsistencies and ensures the data in
the order lists remains reliable.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") CC: stable@vger.kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Link: https://patch.msgid.link/20250714130327.1830534-12-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Groups with no free blocks shouldn't be in any average fragment size list.
However, when all blocks in a group are allocated(i.e., bb_fragments or
bb_free is 0), we currently skip updating the average fragment size, which
means the group isn't removed from its previous s_mb_avg_fragment_size[old]
list.
This created "zombie" groups that were always skipped during traversal as
they couldn't satisfy any block allocation requests, negatively impacting
traversal efficiency.
Therefore, when a group becomes completely full, bb_avg_fragment_size_order
is now set to -1. If the old order was not -1, a removal operation is
performed; if the new order is not -1, an insertion is performed.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") CC: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Link: https://patch.msgid.link/20250714130327.1830534-11-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When allocating IOVA the candidate range gets aligned to the target
alignment. If the range is close to ULONG_MAX then the ALIGN() can
wrap resulting in a corrupted iova.
Open code the ALIGN() using get_add_overflow() to prevent this.
This simplifies the checks as we don't need to check for length earlier
either.
Consolidate the two copies of this code under a single helper.
This bug would allow userspace to create a mapping that overlaps with some
other mapping or a reserved range.
Cc: stable@vger.kernel.org Fixes: 51fe6141f0f6 ("iommufd: Data structure to provide IOVA to PFN mapping") Reported-by: syzbot+c2f65e2801743ca64e08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/685af644.a00a0220.2e5631.0094.GAE@google.com Reviewed-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Link: https://patch.msgid.link/all/1-v1-7b4a16fc390b+10f4-iommufd_alloc_overflow_jgg@nvidia.com/ Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the SM6115 MDSS compatible to clients compatible list, as it also
needs that workaround.
Without this workaround, for example, QRB4210 RB2 which is based on
SM4250/SM6115 generates a lot of smmu unhandled context faults during
boot:
The iotlb_sync_map iommu ops allows drivers to perform necessary cache
flushes when new mappings are established. For the Intel iommu driver,
this callback specifically serves two purposes:
- To flush caches when a second-stage page table is attached to a device
whose iommu is operating in caching mode (CAP_REG.CM==1).
- To explicitly flush internal write buffers to ensure updates to memory-
resident remapping structures are visible to hardware (CAP_REG.RWBF==1).
However, in scenarios where neither caching mode nor the RWBF flag is
active, the cache_tag_flush_range_np() helper, which is called in the
iotlb_sync_map path, effectively becomes a no-op.
Despite being a no-op, cache_tag_flush_range_np() involves iterating
through all cache tags of the iommu's attached to the domain, protected
by a spinlock. This unnecessary execution path introduces overhead,
leading to a measurable I/O performance regression. On systems with NVMes
under the same bridge, performance was observed to drop from approximately
~6150 MiB/s down to ~4985 MiB/s.
Introduce a flag in the dmar_domain structure. This flag will only be set
when iotlb_sync_map is required (i.e., when CM or RWBF is set). The
cache_tag_flush_range_np() is called only for domains where this flag is
set. This flag, once set, is immutable, given that there won't be mixed
configurations in real-world scenarios where some IOMMUs in a system
operate in caching mode while others do not. Theoretically, the
immutability of this flag does not impact functionality.
We now do a weighted selection of server interfaces when allocating
new channels. The weights are decided based on the speed advertised.
The fulfilled weight for an interface is a counter that is used to
track the interface selection. It should be reset back to zero once
all interfaces fulfilling their weight.
In cifs_chan_update_iface, this reset logic was missing. As a result
when the server interface list changes, the client may not be able
to find a new candidate for other channels after all interfaces have
been fulfilled.
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed") Cc: <stable@vger.kernel.org> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the conversion done by commit e88f03230dc0 ("clk: qcom: gcc-ipq8074:
rework nss_port5/6 clock to multiple conf") a Copy-Paste error was made
for the nss_port6_tx_clk_src frequency table.
This was caused by the wrong setting of the parent in
ftbl_nss_port6_tx_clk_src that was wrongly set to P_UNIPHY1_RX instead
of P_UNIPHY2_TX.
This cause the UNIPHY2 port to malfunction when it needs to be scaled to
higher clock. The malfunction was observed with the example scenario
with an Aquantia 10G PHY connected and a speed higher than 1G (example
2.5G)
Fix the broken frequency table to restore original functionality.
Cc: stable@vger.kernel.org Fixes: e88f03230dc0 ("clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Tested-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20250522202600.4028-1-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Any zoned DM target that requires zone append emulation will use the
block layer zone write plugging. In such case, DM target drivers must
not split BIOs using dm_accept_partial_bio() as doing so can potentially
lead to deadlocks with queue freeze operations. Regular write operations
used to emulate zone append operations also cannot be split by the
target driver as that would result in an invalid writen sector value
return using the BIO sector.
In order for zoned DM target drivers to avoid such incorrect BIO
splitting, we must ensure that large BIOs are split before being passed
to the map() function of the target, thus guaranteeing that the
limits for the mapped device are not exceeded.
dm-crypt and dm-flakey are the only target drivers supporting zoned
devices and using dm_accept_partial_bio().
In the case of dm-crypt, this function is used to split BIOs to the
internal max_write_size limit (which will be suppressed in a different
patch). However, since crypt_alloc_buffer() uses a bioset allowing only
up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device
max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS
(128), must thus be respected and write BIOs split accordingly.
In the case of dm-flakey, since zone append emulation is not required,
the block layer zone write plugging is not used and no splitting of BIOs
required.
Modify the function dm_zone_bio_needs_split() to use the block layer
helper function bio_needs_zone_write_plugging() to force a call to
bio_split_to_limits() in dm_split_and_process_bio(). This allows DM
target drivers to avoid using dm_accept_partial_bio() for write
operations on zoned DM devices.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250625093327.548866-4-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for fixing device mapper zone write handling, introduce
the inline helper function bio_needs_zone_write_plugging() to test if a
BIO requires handling through zone write plugging using the function
blk_zone_plug_bio(). This function returns true for any write
(op_is_write(bio) == true) operation directed at a zoned block device
using zone write plugging, that is, a block device with a disk that has
a zone write plug hash table.
This helper allows simplifying the check on entry to blk_zone_plug_bio()
and used in to protect calls to it for blk-mq devices and DM devices.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250625093327.548866-3-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When committing new scheme parameters from the sysfs, the target_nid field
of the damos struct would not be copied. This would result in the
target_nid field to retain its original value, despite being updated in
the sysfs interface.
This patch fixes this issue by copying target_nid in damos_commit().
Link: https://lkml.kernel.org/r/20250709004729.17252-1-bijan311@gmail.com Fixes: 83dc7bbaecae ("mm/damon/sysfs: use damon_commit_ctx()") Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm/damon: fix misc bugs in DAMON modules".
From manual code review, I found below bugs in DAMON modules.
DAMON sample modules crash if those are enabled at boot time, via kernel
command line. A similar issue was found and fixed on DAMON non-sample
modules in the past, but we didn't check that for sample modules.
DAMON non-sample modules are not setting 'enabled' parameters accordingly
when real enabling is failed. Honggyu found and fixed[1] this type of
bugs in DAMON sample modules, and my inspection was motivated by the great
work. Kudos to Honggyu.
Finally, DAMON_RECLIAM is mistakenly losing scheme internal status due to
misuse of damon_commit_ctx(). DAMON_LRU_SORT has a similar misuse, but
fortunately it is not causing real status loss.
Fix the bugs. Since these are similar patterns of bugs that were found in
the past, it would be better to add tests or refactor the code, in future.
This patch (of 6):
If 'enable' parameter of the 'wsse' DAMON sample module is set at boot
time via the kernel command line, memory allocation is tried before the
slab is initialized. As a result kernel NULL pointer dereference BUG can
happen. Fix it by checking the initialization status.
Starting with Rust 1.88.0 (released 2025-06-26), `rustdoc` complains
about a target modifier mismatch in configurations where `-Zfixed-x18`
is passed:
error: mixing `-Zfixed-x18` will cause an ABI mismatch in crate `rust_out`
|
= help: the `-Zfixed-x18` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zfixed-x18` in this crate is incompatible with `-Zfixed-x18=` in dependency `core`
= help: set `-Zfixed-x18=` in this crate or unset `-Zfixed-x18` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=fixed-x18` to silence this error
The reason is that `rustdoc` was not passing the target modifiers when
configuring the session options, and thus it would report a mismatch
that did not exist as soon as a target modifier is used in a dependency.
We did not notice it in the kernel until now because `-Zfixed-x18` has
been a target modifier only since 1.88.0 (and it is the only one we use
so far).
The issue has been reported upstream [1] and a fix has been submitted
[2], including a test similar to the kernel case.
[ This is now fixed upstream (thanks Guillaume for the quick review),
so it will be fixed in Rust 1.90.0 (expected 2025-09-18).
- Miguel ]
Meanwhile, conditionally pass `-Cunsafe-allow-abi-mismatch=fixed-x18`
to workaround the issue on our side.
`rustdoc` can get confused when generating documentation into a folder
that contains generated files from other `rustdoc` versions.
For instance, running something like:
rustup default 1.78.0
make LLVM=1 rustdoc
rustup default 1.88.0
make LLVM=1 rustdoc
may generate errors like:
error: couldn't generate documentation: invalid template: last line expected to start with a comment
|
= note: failed to create or modify "./Documentation/output/rust/rustdoc/src-files.js"
Thus just always clean the output folder before generating the
documentation -- we are anyway regenerating it every time the `rustdoc`
target gets called, at least for the time being.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs). Reported-by: Daniel Almeida <daniel.almeida@collabora.com> Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089/topic/x/near/527201113 Reviewed-by: Tamir Duberstein <tamird@kernel.org> Link: https://lore.kernel.org/r/20250726133435.2460085-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vram block allocation flag must be cleared
before making vram reservation, otherwise reserving
addresses within the currently freed memory range
will always fail.
Fixes: c9cad937c0c5 ("drm/amdgpu: add drm buddy support to amdgpu") Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d38eaf27de1b8584f42d6fb3f717b7ec44b3a7a1) Signed-off-by: Sasha Levin <sashal@kernel.org>
We want to get rid of triggering "Frame Change" events from
frontbuffer flush calls. We are about to move using TRANS_PUSH
register for this on LunarLake and onwards. Touching TRANS_PUSH
register from fronbuffer flush would be problematic as it's written by
DSB as well.
Fix this by using intel_psr_exit when flush or invalidate is done on
LunarLake and onwards. This is not possible on AlderLake and
MeteorLake due to HW bug in PSR2 disable.
This patch is also fixing problems with cursor plane where cursor is
disappearing or duplicate cursor is seen on the screen.
collect_sample() is used to gather samples of the data in a Write op for
analysis to try and determine if the compression algorithm is likely to
achieve anything more quickly than actually running the compression
algorithm.
However, collect_sample() assumes that the data it is going to be sampling
is stored in an ITER_XARRAY-type iterator (which it now should never be)
and doesn't actually check that it is before accessing the underlying
xarray directly.
Fix this by replacing the code with a loop that just uses the standard
iterator functions to sample every other 2KiB block, skipping the
intervening ones. It's not quite the same as the previous algorithm as it
doesn't necessarily align to the pages within an ordinary write from the
pagecache.
Note that the btrfs code from which this was derived samples the inode's
pagecache directly rather than the iterator - but that doesn't necessarily
work for network filesystems if O_DIRECT is in operation.
Fixes: 94ae8c3fee94 ("smb: client: compress: LZ77 code improvements cleanup") Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use the regmap_write() for software reset in fsl_sai_config_disable would
cause the FSL_SAI_CSR_BCE bit to be cleared. Refer to
commit 197c53c8ecb34 ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
FSL_SAI_CSR_BCE should not be cleared. So need to use regmap_update_bits()
instead of regmap_write() for these bit operations.
Fixes: dc78f7e59169d ("ASoC: fsl_sai: Force a software reset when starting in consumer mode") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://patch.msgid.link/20250807020318.2143219-1-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In using CONFIG_RTC_HCTOSYS, rtc_hctosys() will sync the RTC time to the
kernel time as long as rtc_read_time() succeeds. In some power loss
situations, our supercapacitor-backed DS1342 RTC comes up with either an
unpredictable future time or the default 01/01/00 from the datasheet.
The oscillator stop flag (OSF) is set in these scenarios due to the
power loss and can be used to determine the validity of the RTC data.
Some chip types in the ds1307 driver already have OSF handling to
determine whether .read_time provides valid RTC data or returns -EINVAL.
This change removes the clear of the OSF in .probe as the OSF needs to
be preserved to expand the OSF handling to the ds1341 chip type (note
that DS1341 and DS1342 share a datasheet).
The error occurs on the third attempt to encode extents. When function
ext_tree_prepare_commit() reallocates a larger buffer to retry encoding
extents, the "layoutupdate_pages" page array is initialized only after the
retry loop. But ext_tree_free_commitdata() is called on every iteration
and tries to put pages in the array, thus dereferencing uninitialized
pointers.
An additional problem is that there is no limit on the maximum possible
buffer_size. When there are too many extents, the client may create a
layoutcommit that is larger than the maximum possible RPC size accepted
by the server.
During testing, we observed two typical scenarios. First, one memory page
for extents is enough when we work with small files, append data to the
end of the file, or preallocate extents before writing. But when we fill
a new large file without preallocating, the number of extents can be huge,
and counting the number of written extents in ext_tree_encode_commit()
does not help much. Since this number increases even more between
unlocking and locking of ext_tree, the reallocated buffer may not be
large enough again and again.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250630183537.196479-2-sergeybashirov@gmail.com Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When there are too many block extents for a layoutcommit, they may not
all fit into the maximum-sized RPC. This patch allows the generic pnfs
code to properly handle -ENOSPC returned by the block/scsi layout driver
and trigger additional layoutcommits if necessary.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250630183537.196479-5-sergeybashirov@gmail.com Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At the end of the isect translation, disc_addr represents the physical
disk offset. Thus, end calculated from disk_addr is also a physical disk
offset. Therefore, range checking should be done using map->disk_offset,
not map->start.
Because of integer division, we need to carefully calculate the
disk offset. Consider the example below for a stripe of 6 volumes,
a chunk size of 4096, and an offset of 70000.
In blk_stack_limits(), we check that the t->chunk_sectors value is a
multiple of the t->physical_block_size value.
However, by finding the chunk_sectors value in bytes, we may overflow
the unsigned int which holds chunk_sectors, so change the check to be
based on sectors.
Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250729091448.1691334-2-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the LAN8710A datasheet (Rev. B, section 3.8.5.1), a hardware
reset is required after power-on, and the reference clock (REF_CLK) must be
established before asserting reset.
Add DMI quirk entry for Alienware systems with SKU "0CCC" to enable
proper speaker codec configuration (SOC_SDW_CODEC_SPKR).
This system requires the same audio configuration as some existing Dell systems.
Without this patch, the laptop's speakers and microphone will not work.
Several months ago, Joshua Grisham submitted a patch [1]
for several ALC298 based sound cards.
The entry for the LG gram 16 in the alc269_fixup_tbl only matches the
Subsystem ID for the 16Z90R-Q and 16Z90R-K models [2]. My 16Z90R-A has a
different Subsystem ID [3]. I'm not sure why these IDs differ, but I
speculate it's due to the NVIDIA GPU included in the 16Z90R-A model that
isn't present in the other models.
I applied the patch to the latest Arch Linux kernel and the card was
initialized as expected.
Currently elevators will record internal 'async_depth' to throttle
asynchronous requests, and they both calculate shallow_dpeth based on
sb->shift, with the respect that sb->shift is the available tags in one
word.
However, sb->shift is not the availbale tags in the last word, see
__map_depth:
For consequence, if the last word is used, more tags can be get than
expected, for example, assume nr_requests=256 and there are four words,
in the worst case if user set nr_requests=32, then the first word is
the last word, and still use bits per word, which is 64, to calculate
async_depth is wrong.
One the ohter hand, due to cgroup qos, bfq can allow only one request
to be allocated, and set shallow_dpeth=1 will still allow the number
of words request to be allocated.
Fix this problems by using shallow_depth to the whole sbitmap instead
of per word, also change kyber, mq-deadline and bfq to follow this,
a new helper __map_depth_with_shallow() is introduced to calculate
available bits in each word.
It is already called long before we may hit this cleanup code path.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Kernels configured with CONFIG_MULTIUSER=n have no cap_get_proc().
Check for ENOSYS to recognize this case, and continue on to
attempt to access the requested MSRs (such as temperature).
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
turbostat.c: In function 'parse_int_file':
turbostat.c:5567:19: error: 'PATH_MAX' undeclared (first use in this function)
5567 | char path[PATH_MAX];
| ^~~~~~~~
turbostat.c: In function 'probe_graphics':
turbostat.c:6787:19: error: 'PATH_MAX' undeclared (first use in this function)
6787 | char path[PATH_MAX];
| ^~~~~~~~
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Original-patch-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The source and destination of some strcpy operations was the same.
Split out the part of the operations that needed to be done for those
particular calls so the unnecessary copy wasn't done.
In case a menu has comment without letters/numbers (eg. characters
matching the regexp '^[^[:alpha:][:digit:]]+$', for example - or *),
hitting space will cycle through those comments, rather than
selecting/deselecting the currently-highlighted option.
This is the behaviour of hitting any letter/digit: jump to the next
option which prompt starts with that letter. The only letters that
do not behave as such are 'y' 'm' and 'n'. Prompts that start with
one of those three letters are instead matched on the first letter
that is not 'y', 'm' or 'n'.
Fix that by treating 'space' as we treat y/m/n, ie. as an action key,
not as shortcut to jump to prompt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
[masahiro: took from Buildroot, adjusted the commit subject] Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
kernel/kheaders_data.tar.xz is not updated if steps [1] - [3] are run
within the same minute.
The headers_md5 variable stores the MD5 hash of the 'ls -l' output
for all header files. This hash value is used to determine whether
kheaders_data.tar.xz needs to be rebuilt. However, 'ls -l' prints the
modification times with minute-level granularity. If a file is modified
within the same minute and its size remains the same, the MD5 hash does
not change.
To reliably detect file modifications, this commit rewrites
kernel/gen_kheaders.sh to output header dependencies to
kernel/.kheaders_data.tar.xz.cmd. Then, Make compares the timestamps
and reruns kernel/gen_kheaders.sh when necessary. This is the standard
mechanism used by Make and Kbuild.
The on_treeview2_cursor_changed() handler is connected to both the left
and right tree views, but it hardcodes model2 (the GtkTreeModel of the
right tree view). This is incorrect. Get the associated model from the
view.
During BMC firmware upgrades on live systems, the ipmi_msghandler
generates excessive "BMC returned incorrect response" warnings
while the BMC is temporarily offline. This can flood system logs
in large deployments.
Replace dev_warn() with dev_warn_ratelimited() to throttle these
warnings and prevent log spam during BMC maintenance operations.
MLX cap pg_track_log_max_msg_size consists of 5 bits, value of which is
used as power of 2 for max_msg_size. This can lead to multiplication
overflow between max_msg_size (u32) and integer constant, and afterwards
incorrect value is being written to rq_size.
Fix this issue by extending integer constant to u64 type.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc09e ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd56
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/ Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix target_parse_pr_out_transport_id() to return a string representing
the transport ID in a human-readable format (e.g., naa.xxxxxxxx...) for
various SCSI protocol types (SAS, FCP, SRP, SBP).
Previously, the function returned a pointer to the raw binary buffer,
which was incorrectly compared against human-readable strings, causing
comparisons to fail. Now, the function writes a properly formatted
string into a buffer provided by the caller. The output format depends
on the transport protocol:
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
A large DMA mapping request can loop through dma address pinning for
many pages. In cases where THP can not be used, the repeated vmf_insert_pfn can
be costly, so let the task reschedule as need to prevent CPU stalls. Failure to
do so has potential harmful side effects, like increased memory pressure
as unrelated rcu tasks are unable to make their reclaim callbacks and
result in OOM conditions.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20250715184622.3561598-1-kbusch@meta.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
strcpy() performs no bounds checking and can lead to buffer overflows if
the input string exceeds the destination buffer size. This patch replaces
it with strncpy(), and null terminates the input string.
If a console printer is interrupted during panic, it will never
be able to reacquire ownership in order to perform and cleanup.
That in itself is not a problem, since the non-panic CPU will
simply quiesce in an endless loop within nbcon_reacquire_nobuf().
However, in this state, platforms that do not support a true NMI
to interrupt the quiesced CPU will not be able to shutdown that
CPU from within panic(). This then causes problems for such as
being unable to load and run a kdump kernel.
Fix this by allowing non-panic CPUs to reacquire ownership using
a direct acquire. Then the non-panic CPUs can successfullyl exit
the nbcon_reacquire_nobuf() loop and the console driver can
perform any necessary cleanup. But more importantly, the CPU is
no longer quiesced and is free to process any interrupts
necessary for panic() to shutdown the CPU.
All other forms of acquire are still not allowed for non-panic
CPUs since it is safer to have them avoid gaining console
ownership that is not strictly necessary.
Reported-by: Michael Kelley <mhklinux@outlook.com> Closes: https://lore.kernel.org/r/SN6PR02MB4157A4C5E8CB219A75263A17D46DA@SN6PR02MB4157.namprd02.prod.outlook.com Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250606185549.900611-1-john.ogness@linutronix.de Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Let's return errors caught by the generic checks. This fixes generic/494 where
it expects to see EBUSY by setattr_prepare instead of EINVAL by f2fs for active
swapfile.
An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop.
This patch fixes an issue where the touchpad cursor movement becomes
slow on the Dell Precision 5560. Force the touchpad freq to 100khz
as a workaround.
Tested on Dell Precision 5560 with 6.14 to 6.14.6. Cursor movement
is now smooth and responsive.
Signed-off-by: fangzhong.zhou <myth5@myth5.com>
[wsa: kept sorting and removed unnecessary parts from commit msg] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
x_table_lookup currently does stacking during label_parse() if the
target specifies a stack but its only caller ensures that it will
never be used with stacking.
Refactor to slightly simplify the code in x_to_label(), this
also fixes a long standing problem where x_to_labels check on stacking
is only on the first element to the table option list, instead of
the element that is found and used.
Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This follows the established practice and fixes a build failure for me:
security/apparmor/file.c: In function ‘__file_sock_perm’:
security/apparmor/file.c:544:24: error: unused variable ‘sock’ [-Werror=unused-variable]
544 | struct socket *sock = (struct socket *) file->private_data;
| ^~~~
Due to the semantics of iterate_devices(), the current code allows a
request-based dm table as long as it includes one request-stackable
device. It is supposed to only allow tables where there are no
non-request-stackable devices.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
'I3C_BCR_HDR_CAP' is still spec v1.0 and has been renamed to 'advanced
capabilities' in v1.1 onwards. The ST pressure sensor LPS22DF does not
have HDR, but has the 'advanced cap' bit set. The core still wants to
get additional information using the CCC 'GETHDRCAP' (or GETCAPS in v1.1
onwards). Not all controllers support this CCC and will notify the upper
layers about it. For instantiating the device, we can ignore this
unsupported CCC as standard communication will work. Without this patch,
the device will not be instantiated at all.
When using AppArmor profiles inside an unprivileged container,
the link operation observes an unshifted ouid.
(tested with LXD and Incus)
For example, root inside container and uid 1000000 outside, with
`owner /root/link l,` profile entry for ln:
/root$ touch chain && ln chain link
==> dmesg
apparmor="DENIED" operation="link" class="file"
namespace="root//lxd-feet_<var-snap-lxd-common-lxd>" profile="linkit"
name="/root/link" pid=1655 comm="ln" requested_mask="l" denied_mask="l"
fsuid=1000000 ouid=0 [<== should be 1000000] target="/root/chain"
Fix by mapping inode uid of old_dentry in aa_path_link() rather than
using it directly, similarly to how it's mapped in __file_path_perm()
later in the file.
Signed-off-by: Gabriel Totev <gabriel.totev@zetier.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In using CONFIG_RTC_HCTOSYS, rtc_hctosys() will sync the RTC time to the
kernel time as long as rtc_read_time() succeeds. In some power loss
situations, our supercapacitor-backed DS1342 RTC comes up with either an
unpredictable future time or the default 01/01/00 from the datasheet.
The oscillator stop flag (OSF) is set in these scenarios due to the
power loss and can be used to determine the validity of the RTC data.
This change expands the oscillator stop flag (OSF) handling that has
already been implemented for some chips to the ds1341 chip (DS1341 and
DS1342 share a datasheet). This handling manages the validity of the RTC
data in .read_time and .set_time based on the OSF.
LKP found a random config which failed to build because IO accessors
were not defined:
In file included from drivers/i3c/master.c:21:
drivers/i3c/internals.h: In function 'i3c_writel_fifo':
>> drivers/i3c/internals.h:35:9: error: implicit declaration of function 'writesl' [-Werror=implicit-function-declaration]
Add the proper header to where the IO accessors are used.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507150208.BZDzzJ5E-lkp@intel.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250717120046.9022-2-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Passing a module name longer than MODULE_NAME_LEN to the delete_module
syscall results in its silent truncation. This really isn't much of
a problem in practice, but it could theoretically lead to the removal of an
incorrect module. It is more sensible to return ENAMETOOLONG or ENOENT in
such a case.
Update the syscall to return ENOENT, as documented in the delete_module(2)
man page to mean "No module by that name exists." This is appropriate
because a module with a name longer than MODULE_NAME_LEN cannot be loaded
in the first place.
Fix Smatch-detected error:
drivers/md/dm-zoned-target.c:1073 dmz_iterate_devices()
error: uninitialized symbol 'r'.
Smatch detects a possible use of the uninitialized variable 'r' in
dmz_iterate_devices() because if dmz->nr_ddevs is zero, the loop is
skipped and 'r' is returned without being set, leading to undefined
behavior.
Initialize 'r' to 0 before the loop. This ensures that if there are no
devices to iterate over, the function still returns a defined value.
The sdw_dev_lock protects the SoundWire driver callbacks against
the probed flag, which is used to skip the callbacks if the
driver gets removed. For more information see commit bd29c00edd0a
("soundwire: revisit driver bind/unbind and callbacks").
However, this lock is a frequent source of mutex inversions.
Many audio operations eventually hit the hardware resulting in a
SoundWire callback, this means that typically the driver has the
locking order ALSA/ASoC locks -> sdw_dev_lock. Conversely, the IRQ
comes in directly from the SoundWire hardware, but then will often
want to access ALSA/ASoC, such as updating something in DAPM or
an ALSA control. This gives the other lock order sdw_dev_lock ->
ALSA/ASoC locks.
When the IRQ handling was initially added to SoundWire this was
through a callback mechanism. As such it required being covered by
the lock because the callbacks are part of the sdw_driver structure
and are thus present regardless of if the driver is currently
probed.
Since then a newer mechanism using the IRQ framework has been
added, which is currently covered by the same lock but this isn't
actually required. Handlers for the IRQ framework are registered in
probe and should by released during remove, thus the IRQ framework
will have already unbound the IRQ before the slave driver is
removed. Avoid the aforementioned mutex inversion by moving the
handle_nested_irq call outside of the sdw_dev_lock.
During pm_prepare callback, pm_request_resume() delays SoundWire manager D0
entry sequence. Synchronize runtime resume sequence for amd_manager
instance prior to invoking child devices resume sequence for both the amd
power modes(ClockStop Mode and Power off mode).
Change the power_mode_mask check and use pm_runtime_resume() in
amd_pm_prepare() callback.
Since the sibling data is filled after the priv->clks[] array entry is
populated, the first clock that is probed and has a sibling will
temporarily behave as its own sibling until its actual sibling is
populated. To avoid any issues, postpone updating priv->clks[] until after
the sibling is populated.
To implement VIDIOC_QUERYCTRL, we need to know the minimum, maximum,
step and flags of the control. For some of the controls, this involves
querying the actual hardware.
Some non-compliant cameras produce errors when we query them. These
error can be triggered every time, sometimes, or when other controls do
not have the "right value". Right now, we populate that error to userspace.
When an error happens, the v4l2 framework does not copy the v4l2_queryctrl
struct to userspace. Also, userspace apps are not ready to handle any
other error than -EINVAL.
One of the main usecases of VIDIOC_QUERYCTRL is enumerating the controls
of a device. This is done using the V4L2_CTRL_FLAG_NEXT_CTRL flag. In
that usecase, a non-compliant control will make it almost impossible to
enumerate all controls of the device.
A control with an invalid max/min/step/flags is better than non being
able to enumerate the rest of the controls.
This patch:
- Retries for an extra attempt to read the control, to avoid spurious
errors. More attempts do not seem to produce better results in the
tested hardware.
- Makes VIDIOC_QUERYCTRL return 0 for -EIO errors.
- Introduces a warning in dmesg so we can have a trace of what has happened
and sets the V4L2_CTRL_FLAG_DISABLED.
- Makes sure we keep returning V4L2_CTRL_FLAG_DISABLED for all the next
attempts to query that control (other operations have the same
functionality as now).
Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250502-uvc-eaccess-v8-1-0b8b58ac1142@chromium.org Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
projects / thirdparty / kernel / stable.git / log
