In try_to_register_card(), the return value of usb_ifnum_to_if() is
passed directly to usb_interface_claimed() without a NULL check, which
will lead to a NULL pointer dereference when creating an invalid
USB audio device. Fix this by adding a check to ensure the interface
pointer is valid before passing it to usb_interface_claimed().
Fix spelling of CIP_NO_HEADER to prevent a kernel-doc warning.
Warning: amdtp-stream.h:57 Enum value 'CIP_NO_HEADER' not described in enum 'cip_flags'
Warning: amdtp-stream.h:57 Excess enum value '%CIP_NO_HEADERS' description in 'cip_flags'
The check for some lost idle pelt time should be always done when
pick_next_task_fair() fails to pick a task and not only when we call it
from the fair fast-path.
The case happens when the last running task on rq is a RT or DL task. When
the latter goes to sleep and the /Sum of util_sum of the rq is at the max
value, we don't account the lost of idle time whereas we should.
Fixes: 67692435c411 ("sched: Rework pick_next_task() slow-path") Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The vop2_plane_atomic_check() function incorrectly checks
drm_rect_width(dest) twice instead of verifying both width and height.
Fix the second condition to use drm_rect_height(dest) so that invalid
destination rectangles with height < 4 are correctly rejected.
CIK GPUs such as Hawaii appear to use PP_TABLE_V0 in which case
the shutdown temperature is hardcoded in smu7_init_dpm_defaults
and is already multiplied by 1000. The value was mistakenly
multiplied another time by smu7_get_thermal_temperature_range.
Fixes: 4ba082572a42 ("drm/amd/powerplay: export the thermal ranges of VI asics (V2)") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1676 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Stress testing the audio jack hotplug handling on a few Steam Deck units
revealed that the debounce circuit is responsible for having a negative
impact on the detection reliability, e.g. in some cases the ejection
interrupt is not fired, while in other instances it goes into a kind of
invalid state and generates a flood of misleading interrupts.
Add new entries to the DMI table introduced via commit 1bc40efdaf4a
("ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect")
and extend the quirk logic to allow bypassing the debounce circuit used
for jack detection on Valve Steam Deck LCD and OLED models.
While at it, rename existing NAU8821_JD_ACTIVE_HIGH quirk bitfield to
NAU8821_QUIRK_JD_ACTIVE_HIGH. This should help improve code readability
by differentiating from similarly named register bits.
Instead of adding yet another utility function for dealing with the
interrupt clearing register, generalize nau8821_int_status_clear_all()
by renaming it to nau8821_irq_status_clear(), whilst introducing a
second parameter to allow restricting the operation scope to a single
interrupt instead of the whole range of active IRQs.
While at it, also fix a spelling typo in the comment block.
Note this is mainly a prerequisite for subsequent patches aiming to
address some deficiencies in the implementation of the interrupt
handler. Thus the presence of the Fixes tag below is intentional, to
facilitate backporting.
The microphone detection work scheduled by a prior jack insertion
interrupt may still be in a pending state or under execution when a jack
ejection interrupt has been fired.
This might lead to a racing condition or nau8821_jdet_work() completing
after nau8821_eject_jack(), which will override the currently
disconnected state of the jack and incorrectly report the headphone or
the headset as being connected.
Cancel any pending jdet_work or wait for its execution to finish before
attempting to handle the ejection interrupt.
Proceed similarly before launching the eject handler as a consequence of
detecting an invalid insert interrupt.
There is now a new LT9211 rev. U5, which reports chip ID 0x18 0x01 0xe4 .
The previous LT9211 reported chip ID 0x18 0x01 0xe3 , which is what the
driver checks for right now. Since there is a possibility there will be
yet another revision of the LT9211 in the future, drop the last version
nibble check to allow all future revisions of the chip to work with this
driver.
This fix makes LT9211 rev. U5 work with this driver.
When adding a kprobe such as "p:probe/tcp_sendmsg _text+15392192",
arch_check_kprobe would start iterating all instructions starting from
_text until the probed address. Not only is this very inefficient, but
literal values in there (e.g. left by function patching) are
misinterpreted in a way that causes a desync.
Fix this by doing it like x86: start the iteration at the closest
preceding symbol instead of the given starting point.
Fixes: 87f48c7ccc73 ("riscv: kprobe: Fixup kernel panic when probing an illegal position") Signed-off-by: Fabian Vogt <fvogt@suse.de> Signed-off-by: Marvin Friedrich <marvin.friedrich@suse.com> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/6191817.lOV4Wx5bFT@fvogt-thinkpad Signed-off-by: Paul Walmsley <pjw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Convert `lan78xx_init_mac_address` to return error codes and handle
failures in register read and write operations. Update `lan78xx_reset`
to check for errors during MAC address initialization and propagate them
appropriately.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241209130751.703182-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8d93ff40d49d ("net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
With async crypto, we rely on tx_work to actually transmit records
once encryption completes. But while send() is running, both the
tx_lock and socket lock are held, so tx_work_handler cannot process
the queue of encrypted records, and simply reschedules itself. During
a large send(), this could last a long time, and use a lot of memory.
Transmit any pending encrypted records before restarting the main
loop of tls_sw_sendmsg_locked.
Async decryption calls tls_strp_msg_hold to create a clone of the
input skb to hold references to the memory it uses. If we fail to
allocate that clone, proceeding with async decryption can lead to
various issues (UAF on the skb, writing into userspace memory after
the recv() call has returned).
In this case, wait for all pending decryption requests.
When userspace wants to send a non-DATA record (via the
TLS_SET_RECORD_TYPE cmsg), we need to send any pending data from a
previous MSG_MORE send() as a separate DATA record. If that DATA record
is encrypted asynchronously, tls_handle_open_record will return
-EINPROGRESS. This is currently treated as an error by
tls_process_cmsg, and it will skip setting record_type to the correct
value, but the caller (tls_sw_sendmsg_locked) handles that return
value correctly and proceeds with sending the new message with an
incorrect record_type (DATA instead of whatever was requested in the
cmsg).
Always set record_type before handling the open record. If
tls_handle_open_record returns an error, record_type will be
ignored. If it succeeds, whether with synchronous crypto (returning 0)
or asynchronous (returning -EINPROGRESS), the caller will proceed
correctly.
If we hit an error during the main loop of tls_sw_sendmsg_locked (eg
failed allocation), we jump to send_end and immediately
return. Previous iterations may have queued async encryption requests
that are still pending. We should wait for those before returning, as
we could otherwise be reading from memory that userspace believes
we're not using anymore, which would be a sort of use-after-free.
This is similar to what tls_sw_recvmsg already does: failures during
the main loop jump to the "wait for async" code, not straight to the
unlock/return.
When asynchronous encryption is used KTLS sends out the final data at
proto->close time. This becomes problematic when the task calling
close() receives a signal. In this case it can happen that
tcp_sendmsg_locked() called at close time returns -ERESTARTSYS and the
final data is not sent.
The described situation happens when KTLS is used in conjunction with
io_uring, as io_uring uses task_work_add() to add work to the current
userspace task. A discussion of the problem along with a reproducer can
be found in [1] and [2]
Fix this by waiting for the asynchronous encryption to be completed on
the final message. With this there is no data left to be sent at close
time.
Neal reported that using neper tcp_stream with TCP_TX_DELAY
set to 50ms would often lead to flows stuck in a small cwnd mode,
regardless of the congestion control.
While tcp_stream sets TCP_TX_DELAY too late after the connect(),
it highlighted two kernel bugs.
The following heuristic in tcp_tso_should_defer() seems wrong
for large RTT:
delta = tp->tcp_clock_cache - head->tstamp;
/* If next ACK is likely to come too late (half srtt), do not defer */
if ((s64)(delta - (u64)NSEC_PER_USEC * (tp->srtt_us >> 4)) < 0)
goto send_now;
If next ACK is expected to come in more than 1 ms, we should
not defer because we prefer a smooth ACK clocking.
While blamed commit was a step in the good direction, it was not
generic enough.
Another patch fixing TCP_TX_DELAY for established flows
will be proposed when net-next reopens.
During interface toggle operations (ifdown/ifup), the driver currently
resets the local helper variable 'phy_link' to -1. This causes the link
state machine to incorrectly interpret the state as a link change event,
resulting in spurious "Link is down" messages being logged when the
interface is brought back up.
Preserve the phy_link state across interface toggles to avoid treating
the -1 sentinel value as a legitimate link state transition.
Fixes: 88131a812b16 ("amd-xgbe: Perform phy connect/disconnect at dev open/stop") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/20251010065142.1189310-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer.
After resume from S4 (hibernate), RTL8168H/RTL8111H truncates incoming
packets. Packet captures show messages like "IP truncated-ip - 146 bytes
missing!".
The issue is caused by RxConfig not being properly re-initialized after
resume. Re-initializing the RxConfig register before the chip
re-initialization sequence avoids the truncation and restores correct
packet reception.
This follows the same pattern as commit ef9da46ddef0 ("r8169: fix data
corruption issue on RTL8402").
Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E") Signed-off-by: Linmao Li <lilinmao@kylinos.cn> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20251009122549.3955845-1-lilinmao@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This sysctl is not per interface; it's global per netns.
Fixes: 292ecd9f5a94 ("doc: move seg6_flowlabel to seg6-sysctl.rst") Reported-by: Philippe Guibert <philippe.guibert@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 227619c3ff7c ("can: m_can: move runtime PM enable/disable to
m_can_platform") moved the PM runtime enable from the m_can core
driver into the m_can_platform.
That patch forgot to move the pm_runtime_disable() to
m_can_plat_remove(), so that unloading the m_can_platform driver
causes an "Unbalanced pm_runtime_enable!" error message.
Add the missing pm_runtime_disable() to m_can_plat_remove() to fix the
problem.
Cc: Patrik Flykt <patrik.flykt@linux.intel.com> Fixes: 227619c3ff7c ("can: m_can: move runtime PM enable/disable to m_can_platform") Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://patch.msgid.link/20250929-m_can-fix-state-handling-v4-1-682b49b49d9a@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit 168316db3583("dax: assert that i_rwsem is held
exclusive for writes") added lock assertions to ensure proper
locking in DAX operations. However, these assertions trigger
false-positive lockdep warnings since read lock is unnecessary
on read-only filesystems(e.g., erofs).
This patch skips the read lock assertion for read-only filesystems,
eliminating the spurious warnings while maintaining the integrity
checks for writable filesystems.
Fixes: 168316db3583 ("dax: assert that i_rwsem is held exclusive for writes") Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Reviewed-by: Friendy Su <friendy.su@sony.com> Reviewed-by: Daniel Palmer <daniel.palmer@sony.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering
the case when slots were not released during the last report.
This can be problematic if the firmware forgets to release a finger
while others are still present.
This was observed on the Synaptics DLL0945 touchpad found on the Dell
XPS 9310 and the Dell Inspiron 5406.
Fixes: 4f4001bc76fd ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While discussing solutions for the teardown problem which results from
circular dependencies between timers and workqueues, where timers schedule
work from their timer callback and workqueues arm the timers from work
items, it was discovered that the recent fix to the QCA code is incorrect.
That commit fixes the obvious problem of using del_timer() instead of
del_timer_sync() and reorders the teardown calls to
destroy_workqueue(wq);
del_timer_sync(t);
This makes it less likely to explode, but it's still broken:
destroy_workqueue(wq);
/* After this point @wq cannot be touched anymore */
---> timer expires
queue_work(wq) <---- Results in a NULL pointer dereference
deep in the work queue core code.
del_timer_sync(t);
Use the new timer_shutdown_sync() function to ensure that the timers are
disarmed, no timer callbacks are running and the timers cannot be armed
again. This restores the original teardown sequence:
timer_shutdown_sync(t);
destroy_workqueue(wq);
which is now correct because the timer core silently ignores potential
rearming attempts which can happen when destroy_workqueue() drains pending
work before mopping up the workqueue.
Fixes: 72ef98445aca ("Bluetooth: hci_qca: Use del_timer_sync() before freeing") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Acked-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/all/87iljhsftt.ffs@tglx Link: https://lore.kernel.org/r/20221123201625.435907114@linutronix.de Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to make sure that a timer is not re-armed after it is stopped
before freeing, a new shutdown state is added to the timer code. The API
timer_shutdown_sync() and timer_shutdown() must be called before the
object that holds the timer can be freed.
Update the documentation to reflect this new workflow.
[ tglx: Updated to the new semantics and updated the zh_CN version ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Link: https://lore.kernel.org/r/20221110064147.712934793@goodmis.org Link: https://lore.kernel.org/r/20221123201625.375284489@linutronix.de Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
Expose new interfaces for this: timer_shutdown_sync() and timer_shutdown().
timer_shutdown_sync() has the same functionality as timer_delete_sync()
plus the NULL-ification of the timer function.
timer_shutdown() has the same functionality as timer_delete() plus the
NULL-ification of the timer function.
In both cases the rearming of the timer is prevented by silently discarding
rearm attempts due to timer->function being NULL.
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
Add a shutdown argument to the relevant internal functions which makes the
actual deactivation code set timer->function to NULL which in turn prevents
rearming of the timer.
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
Split the inner workings of try_do_del_timer_sync(), del_timer_sync() and
del_timer() into helper functions to prepare for implementing the shutdown
functionality.
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
In preparation for that replace the warnings in the relevant code paths
with checks for timer->function == NULL. If the pointer is NULL, then
discard the rearm request silently.
Add debug_assert_init() instead of the WARN_ON_ONCE(!timer->function)
checks so that debug objects can warn about non-initialized timers.
The warning of debug objects does not warn if timer->function == NULL. It
warns when timer was not initialized using timer_setup[_on_stack]() or via
DEFINE_TIMER(). If developers fail to enable debug objects and then waste
lots of time to figure out why their non-initialized timer is not firing,
they deserve it. Same for initializing a timer with a NULL function.
The timer code still has a few BUG_ON()s left which are crashing the kernel
in situations where it still can recover or simply refuse to take an
action.
Remove the one in the hotplug callback which checks for the CPU being
offline. If that happens then the whole hotplug machinery will explode in
colourful ways.
Replace the rest with WARN_ON_ONCE() and conditional returns where
appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Link: https://lore.kernel.org/r/20221123201624.769128888@linutronix.de Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new "shutdown" timer state is being added to the generic timer code. One
of the functions to change the timer into the state is called
"timer_shutdown()". This means that there can not be other functions
called "timer_shutdown()" as the timer code owns the "timer_*" name space.
Rename timer_shutdown() to evt_timer_shutdown() to avoid this conflict.
A new "shutdown" timer state is being added to the generic timer code. One
of the functions to change the timer into the state is called
"timer_shutdown()". This means that there can not be other functions
called "timer_shutdown()" as the timer code owns the "timer_*" name space.
Rename timer_shutdown() to arch_timer_shutdown() to avoid this conflict.
A new "shutdown" timer state is being added to the generic timer code. One
of the functions to change the timer into the state is called
"timer_shutdown()". This means that there can not be other functions called
"timer_shutdown()" as the timer code owns the "timer_*" name space.
Rename timer_shutdown() to spear_timer_shutdown() to avoid this conflict.
del_timer_sync() does not return the number of times it tried to delete the
timer which rearms itself. It's clearly documented:
The function returns whether it has deactivated a pending timer or not.
This part of the documentation is from 2003 where del_timer_sync() really
returned the number of deletion attempts for unknown reasons. The code
was rewritten in 2005, but the documentation was not updated.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Link: https://lore.kernel.org/r/20221123201624.452282769@linutronix.de Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
After an bind/unbind cycle, the ecm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
After an bind/unbind cycle, the rndis->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Gadget function drivers often have goto-based error handling in their
bind paths, which can be bug-prone. Refactoring these paths to use
__free() scope-based cleanup is desirable, but currently blocked.
The blocker is that usb_ep_free_request(ep, req) requires two
parameters, while the __free() mechanism can only pass a pointer to the
request itself.
Store an endpoint pointer in the struct usb_request. The pointer is
populated centrally in usb_ep_alloc_request() on every successful
allocation, making the request object self-contained.
Condition guards are found to be redundant, as the call flow is properly
managed now, as also observed in the Exynos5433 DECON driver. Since
state checking is no longer necessary, remove it.
This also fixes an issue which prevented decon_commit() from
decon_atomic_enable() due to an incorrect state change setting.
The DECON channels are not cleared properly as the windows aren't
shadow protected. When accompanied with an IOMMU, it pagefaults, and
the kernel panics.
Implement shadow protect/unprotect, along with a standalone update,
for channel clearing to properly take effect.
Remove fixed PPI lane count setup. The R-Car DSI host is capable
of operating in 1..4 DSI lane mode. Remove the hard-coded 4-lane
configuration from PPI register settings and instead configure
the PPI lane count according to lane count information already
obtained by this driver instance.
Configure TXSETR register to match PPI lane count. The R-Car V4H
Reference Manual R19UH0186EJ0121 Rev.1.21 section 67.2.2.3 Tx Set
Register (TXSETR), field LANECNT description indicates that the
TXSETR register LANECNT bitfield lane count must be configured
such, that it matches lane count configuration in PPISETR register
DLEN bitfield. Make sure the LANECNT and DLEN bitfields are
configured to match.
If cppc_get_transition_latency() returns CPUFREQ_ETERNAL to indicate a
failure to retrieve the transition latency value from the platform
firmware, the CPPC cpufreq driver will use that value (converted to
microseconds) as the policy transition delay, but it is way too large
for any practical use.
Address this by making the driver use the cpufreq's default
transition latency value (in microseconds) as the transition delay
if CPUFREQ_ETERNAL is returned by cppc_get_transition_latency().
Fixes: d4f3388afd48 ("cpufreq / CPPC: Set platform specific transition_delay_us") Cc: 5.19+ <stable@vger.kernel.org> # 5.19 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Qais Yousef <qyousef@layalina.io>
[ added CPUFREQ_DEFAULT_TRANSITION_LATENCY_NS definition to include/linux/cpufreq.h ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why]
Not all renoir hardware supports secure display. If the TA is present
but the feature isn't supported it will fail to load or send commands.
This shows ERR messages to the user that make it seems like there is
a problem.
[How]
Check the resp_status of the context to see if there was an error
before trying to send any secure display commands.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1415 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Adrian Yip <adrian.ytw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The atomic variable vm_fault_info_updated is used to synchronize access to
adev->gmc.vm_fault_info between the interrupt handler and
get_vm_fault_info().
The default atomic functions like atomic_set() and atomic_read() do not
provide memory barriers. This allows for CPU instruction reordering,
meaning the memory accesses to vm_fault_info and the vm_fault_info_updated
flag are not guaranteed to occur in the intended order. This creates a
race condition that can lead to inconsistent or stale data being used.
The previous implementation, which used an explicit mb(), was incomplete
and inefficient. It failed to account for all potential CPU reorderings,
such as the access of vm_fault_info being reordered before the atomic_read
of the flag. This approach is also more verbose and less performant than
using the proper atomic functions with acquire/release semantics.
Fix this by switching to atomic_set_release() and atomic_read_acquire().
These functions provide the necessary acquire and release semantics,
which act as memory barriers to ensure the correct order of operations.
It is also more efficient and idiomatic than using explicit full memory
barriers.
Fixes: b97dfa27ef3a ("drm/amdgpu: save vm fault information for amdkfd") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
When starting relocation, at reloc_chunk_start(), if we happen to find
the flag BTRFS_FS_RELOC_RUNNING is already set we return an error
(-EINPROGRESS) to the callers, however the callers call reloc_chunk_end()
which will clear the flag BTRFS_FS_RELOC_RUNNING, which is wrong since
relocation was started by another task and still running.
Finding the BTRFS_FS_RELOC_RUNNING flag already set is an unexpected
scenario, but still our current behaviour is not correct.
Fix this by never calling reloc_chunk_end() if reloc_chunk_start() has
returned an error, which is what logically makes sense, since the general
widespread pattern is to have end functions called only if the counterpart
start functions succeeded. This requires changing reloc_chunk_start() to
clear BTRFS_FS_RELOC_RUNNING if there's a pending cancel request.
Fixes: 907d2710d727 ("btrfs: add cancellable chunk relocation support") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Investigation revealed that the inode has both flags set:
DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1
This is an invalid combination since an inode should have either:
- INLINE_DATA: data stored directly in the inode
- EXTENTS: data stored in extent-mapped blocks
Having both flags causes ext4_has_inline_data() to return true, skipping
extent tree validation in __ext4_iget(). The unvalidated out-of-order
extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer
underflow when calculating hole sizes.
Fix this by detecting this invalid flag combination early in ext4_iget()
and rejecting the corrupted inode.
When freeing metadata blocks in nojournal mode, ext4_forget() calls
bforget() to clear the dirty flag on the buffer_head and remvoe
associated mappings. This is acceptable if the metadata has not yet
begun to be written back. However, if the write-back has already started
but is not yet completed, ext4_forget() will have no effect.
Subsequently, ext4_mb_clear_bb() will immediately return the block to
the mb allocator. This block can then be reallocated immediately,
potentially causing an data corruption issue.
Fix this by clearing the buffer's dirty flag and waiting for the ongoing
I/O to complete, ensuring that no further writes to stale data will
occur.
When releasing file system metadata blocks in jbd2_journal_forget(), if
this buffer has not yet been checkpointed, it may have already been
written back, currently be in the process of being written back, or has
not yet written back. jbd2_journal_forget() calls
jbd2_journal_try_remove_checkpoint() to check the buffer's status and
add it to the current transaction if it has not been written back. This
buffer can only be reallocated after the transaction is committed.
jbd2_journal_try_remove_checkpoint() attempts to lock the buffer and
check its dirty status while holding the buffer lock. If the buffer has
already been written back, everything proceeds normally. However, there
are two issues. First, the function returns immediately if the buffer is
locked by the write-back process. It does not wait for the write-back to
complete. Consequently, until the current transaction is committed and
the block is reallocated, there is no guarantee that the I/O will
complete. This means that ongoing I/O could write stale metadata to the
newly allocated block, potentially corrupting data. Second, the function
unlocks the buffer as soon as it detects that the buffer is still dirty.
If a concurrent write-back occurs immediately after this unlocking and
before clear_buffer_dirty() is called in jbd2_journal_forget(), data
corruption can theoretically still occur.
Although these two issues are unlikely to occur in practice since the
undergoing metadata writeback I/O does not take this long to complete,
it's better to explicitly ensure that all ongoing I/O operations are
completed.
Fixes: 597599268e3b ("jbd2: discard dirty data when forgetting an un-journalled buffer") Cc: stable@kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250916093337.3161016-2-yi.zhang@huaweicloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix three refcount inconsistency issues related to `cifs_sb_tlink`.
Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be
called after successful calls to `cifs_sb_tlink()`. Three calls fail to
update refcount accordingly, leading to possible resource leaks.
Fixes: 8ceb98437946 ("CIFS: Move rename to ops struct") Fixes: 2f1afe25997f ("cifs: Use smb 2 - 3 and cifsacl mount options getacl functions") Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") Cc: stable@vger.kernel.org Signed-off-by: Shuhao Fu <sfual@cse.ust.hk> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VIRQs come in 3 flavors, per-VPU, per-domain, and global, and the VIRQs
are tracked in per-cpu virq_to_irq arrays.
Per-domain and global VIRQs must be bound on CPU 0, and
bind_virq_to_irq() sets the per_cpu virq_to_irq at registration time
Later, the interrupt can migrate, and info->cpu is updated. When
calling __unbind_from_irq(), the per-cpu virq_to_irq is cleared for a
different cpu. If bind_virq_to_irq() is called again with CPU 0, the
stale irq is returned. There won't be any irq_info for the irq, so
things break.
Make xen_rebind_evtchn_to_cpu() update the per_cpu virq_to_irq mappings
to keep them update to date with the current cpu. This ensures the
correct virq_to_irq is cleared in __unbind_from_irq().
With lazytime mount option enabled we can be switching many dirty inodes
on cgroup exit to the parent cgroup. The numbers observed in practice
when systemd slice of a large cron job exits can easily reach hundreds
of thousands or millions. The logic in inode_do_switch_wbs() which sorts
the inode into appropriate place in b_dirty list of the target wb
however has linear complexity in the number of dirty inodes thus overall
time complexity of switching all the inodes is quadratic leading to
workers being pegged for hours consuming 100% of the CPU and switching
inodes to the parent wb.
Simple reproducer of the issue:
FILES=10000
# Filesystem mounted with lazytime mount option
MNT=/mnt/
echo "Creating files and switching timestamps"
for (( j = 0; j < 50; j ++ )); do
mkdir $MNT/dir$j
for (( i = 0; i < $FILES; i++ )); do
echo "foo" >$MNT/dir$j/file$i
done
touch -a -t 202501010000 $MNT/dir$j/file*
done
wait
echo "Syncing and flushing"
sync
echo 3 >/proc/sys/vm/drop_caches
echo "Reading all files from a cgroup"
mkdir /sys/fs/cgroup/unified/mycg1 || exit
echo $$ >/sys/fs/cgroup/unified/mycg1/cgroup.procs || exit
for (( j = 0; j < 50; j ++ )); do
cat /mnt/dir$j/file* >/dev/null &
done
wait
echo "Switching wbs"
# Now rmdir the cgroup after the script exits
We need to maintain b_dirty list ordering to keep writeback happy so
instead of sorting inode into appropriate place just append it at the
end of the list and clobber dirtied_time_when. This may result in inode
writeback starting later after cgroup switch however cgroup switches are
rare so it shouldn't matter much. Since the cgroup had write access to
the inode, there are no practical concerns of the possible DoS issues.
Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
process_inode_switch_wbs_work() can be switching over 100 inodes to a
different cgroup. Since switching an inode requires counting all dirty &
under-writeback pages in the address space of each inode, this can take
a significant amount of time. Add a possibility to reschedule after
processing each inode to avoid softlockups.
Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When CONFIG_TMPFS is enabled, the initial root filesystem is a tmpfs.
By default, a tmpfs mount is limited to using 50% of the available RAM
for its content. This can be problematic in memory-constrained
environments, particularly during a kdump capture.
In a kdump scenario, the capture kernel boots with a limited amount of
memory specified by the 'crashkernel' parameter. If the initramfs is
large, it may fail to unpack into the tmpfs rootfs due to insufficient
space. This is because to get X MB of usable space in tmpfs, 2*X MB of
memory must be available for the mount. This leads to an OOM failure
during the early boot process, preventing a successful crash dump.
This patch introduces a new kernel command-line parameter,
initramfs_options, which allows passing specific mount options directly
to the rootfs when it is first mounted. This gives users control over
the rootfs behavior.
For example, a user can now specify initramfs_options=size=75% to allow
the tmpfs to use up to 75% of the available memory. This can
significantly reduce the memory pressure for kdump.
Consider a practical example:
To unpack a 48MB initramfs, the tmpfs needs 48MB of usable space. With
the default 50% limit, this requires a memory pool of 96MB to be
available for the tmpfs mount. The total memory requirement is therefore
approximately: 16MB (vmlinuz) + 48MB (loaded initramfs) + 48MB (unpacked
kernel) + 96MB (for tmpfs) + 12MB (runtime overhead) ≈ 220MB.
By using initramfs_options=size=75%, the memory pool required for the
48MB tmpfs is reduced to 48MB / 0.75 = 64MB. This reduces the total
memory requirement by 32MB (96MB - 64MB), allowing the kdump to succeed
with a smaller crashkernel size, such as 192MB.
An alternative approach of reusing the existing rootflags parameter was
considered. However, a new, dedicated initramfs_options parameter was
chosen to avoid altering the current behavior of rootflags (which
applies to the final root filesystem) and to prevent any potential
regressions.
Also add documentation for the new kernel parameter "initramfs_options"
This approach is inspired by prior discussions and patches on the topic.
Ref: https://www.lightofdawn.org/blog/?viewDetailed=00128
Ref: https://landley.net/notes-2015.html#01-01-2015
Ref: https://lkml.org/lkml/2021/6/29/783
Ref: https://www.kernel.org/doc/html/latest/filesystems/ramfs-rootfs-initramfs.html#what-is-rootfs
When servers set the C-flag in their MP_CAPABLE to tell clients not to
create subflows to the initial address and port, clients will likely not
use their other endpoints. That's because the in-kernel path-manager
uses the 'subflow' endpoints to create subflows only to the initial
address and port.
If the limits have not been modified to accept ADD_ADDR, the client
doesn't try to establish new subflows. If the limits accept ADD_ADDR,
the routing routes will be used to select the source IP.
The C-flag is typically set when the server is operating behind a legacy
Layer 4 load balancer, or using anycast IP address. Clients having their
different 'subflow' endpoints setup, don't end up creating multiple
subflows as expected, and causing some deployment issues.
A special case is then added here: when servers set the C-flag in the
MPC and directly sends an ADD_ADDR, this single ADD_ADDR is accepted.
The 'subflows' endpoints will then be used with this new remote IP and
port. This exception is only allowed when the ADD_ADDR is sent
immediately after the 3WHS, and makes the client switching to the 'fully
established' mode. After that, 'select_local_address()' will not be able
to find any subflows, because 'id_avail_bitmap' will be filled in
mptcp_pm_create_subflow_or_signal_addr(), when switching to 'fully
established' mode.
Fixes: df377be38725 ("mptcp: add deny_join_id0 in mptcp_options_received") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/536 Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-1-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in pm.c, because commit 498d7d8b75f1 ("mptcp: pm: remove
'_nl' from mptcp_pm_nl_is_init_remote_addr") renamed an helper in the
context, and it is not in this version. The same new code can be
applied at the same place.
Conflict in pm_kernel.c, because the modified code has been moved from
pm_netlink.c to pm_kernel.c in commit 8617e85e04bd ("mptcp: pm: split
in-kernel PM specific code"), which is not in this version. The
resolution is easy: simply by applying the patch where 'pm_kernel.c'
has been replaced 'pm_netlink.c'.
Conflict in pm_netlink.c, because commit b83fbca1b4c9 ("mptcp: pm:
reduce entries iterations on connect") is not in this version. Instead
of using the 'locals' variable (struct mptcp_pm_local *) from the new
version and embedding a "struct mptcp_addr_info", we can simply
continue to use the 'addrs' variable (struct mptcp_addr_info *).
Because commit b9d69db87fb7 ("mptcp: let the in-kernel PM use mixed
IPv4 and IPv6 addresses") is not in this version, it is also required
to pass an extra parameter to fill_local_addresses_vec(): struct
mptcp_addr_info *remote, which is available from the caller side.
Conflict in protocol.h, because commit af3dc0ad3167 ("mptcp: Remove
unused declaration mptcp_sockopt_sync()") is not in this version and
it removed one line in the context. The resolution is easy because the
new function can still be added at the same place. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With `CONFIG_TRACE_MMIO_ACCESS=y`, the `{read,write}{b,w,l,q}{_relaxed}()`
mmio accessors unconditionally call `log_{post_}{read,write}_mmio()`
helpers, which in turn call the ftrace ops for `rwmmio` trace events
This adds a performance penalty per mmio accessor call, even when
`rwmmio` events are disabled at runtime (~80% overhead on local
measurement).
Guard these with `tracepoint_enabled()`.
Signed-off-by: Varad Gautam <varadgautam@google.com> Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copy the forced type casts from the normal MMIO accessors to suppress
the sparse warnings that point out __raw_readl() returns a native endian
word (just like readl()).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stable-dep-of: 8327bd4fcb6c ("asm-generic/io.h: Skip trace helpers if rwmmio events are disabled") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to compiler optimizations like inlining, there are cases where
MMIO traces using _THIS_IP_ for caller information might not be
sufficient to provide accurate debug traces.
1) With optimizations (Seen with GCC):
In this case, _THIS_IP_ works fine and prints the caller information
since it will be inlined into the caller and we get the debug traces
on who made the MMIO access, for ex:
_THIS_IP_ will not be sufficient in this case as it will print only
the MMIO accessors itself which is of not much use since it is not
inlined as below for example:
So in order to handle this second case as well irrespective of the compiler
optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate
debug information in all these scenarios.
In certain circumstances, the ACPI handle of a data-only node may be
NULL, in which case it does not make sense to attempt to attach that
node to an ACPI namespace object, so update the code to avoid attempts
to do so.
This prevents confusing and unuseful error messages from being printed.
Also document the fact that the ACPI handle of a data-only node may be
NULL and when that happens in a code comment. In addition, make
acpi_add_nondev_subnodes() print a diagnostic message for each data-only
node with an unknown ACPI namespace scope.
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles") Cc: 6.0+ <stable@vger.kernel.org> # 6.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some places in the ACPI device properties handling code, it is
unclear why the code is what it is. Some assumptions are not documented
and some pieces of code are based on knowledge that is not mentioned
anywhere.
Add code comments explaining these things.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Stable-dep-of: baf60d5cb8bc ("ACPI: property: Do not pass NULL handles to acpi_attach_data()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Data-only subnode links following the ACPI data subnode GUID in a _DSD
package are expected to point to named objects returning _DSD-equivalent
packages. If a reference to such an object is used in the target field
of any of those links, that object will be evaluated in place (as a
named object) and its return data will be embedded in the outer _DSD
package.
For this reason, it is not expected to see a subnode link with the
target field containing a local reference (that would mean pointing
to a device or another object that cannot be evaluated in place and
therefore cannot return a _DSD-equivalent package).
Accordingly, simplify the code parsing data-only subnode links to
simply print a message when it encounters a local reference in the
target field of one of those links.
Moreover, since acpi_nondev_subnode_data_ok() would only have one
caller after the change above, fold it into that caller.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0jVeSrDO6hrZhKgRZrH=FpGD4vNUjFD8hV9WwN9TLHjzQ@mail.gmail.com/ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Stable-dep-of: baf60d5cb8bc ("ACPI: property: Do not pass NULL handles to acpi_attach_data()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to commit b52da4054ee0 ("ipmi: Rework user message limit handling"),
i_ipmi_request() used to increase the user reference counter if the receive
message is provided by the caller of IPMI API functions. This is no longer
the case. However, ipmi_free_recv_msg() is still called and decreases the
reference counter. This results in the reference counter reaching zero,
the user data pointer is released, and all kinds of interesting crashes are
seen.
Fix the problem by increasing user reference counter if the receive message
has been provided by the caller.
This patch required quite a bit of work to backport due to a number
of unrelated changes that do not make sense to backport. This has
been run against my test suite and passes all tests.
The limit on the number of user messages had a number of issues,
improper counting in some cases and a use after free.
Restructure how this is all done to handle more in the receive message
allocation routine, so all refcouting and user message limit counts
are done in that routine. It's a lot cleaner and safer.
Reported-by: Gilles BULOZ <gilles.buloz@kontron.com> Closes: https://lore.kernel.org/lkml/aLsw6G0GyqfpKs2S@mail.minyard.net/ Fixes: 8e76741c3d8b ("ipmi: Add a limit on the number of users that may use IPMI") Cc: <stable@vger.kernel.org> # 4.19 Signed-off-by: Corey Minyard <corey@minyard.net> Tested-by: Gilles BULOZ <gilles.buloz@kontron.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[BUG]
With my local branch to enable bs > ps support for btrfs, sometimes I
hit the following ASSERT() inside submit_one_sector():
ASSERT(block_start != EXTENT_MAP_HOLE);
Please note that it's not yet possible to hit this ASSERT() in the wild
yet, as it requires btrfs bs > ps support, which is not even in the
development branch.
But on the other hand, there is also a very low chance to hit above
ASSERT() with bs < ps cases, so this is an existing bug affect not only
the incoming bs > ps support but also the existing bs < ps support.
[CAUSE]
Firstly that ASSERT() means we're trying to submit a dirty block but
without a real extent map nor ordered extent map backing it.
Furthermore with extra debugging, the folio triggering such ASSERT() is
always larger than the fs block size in my bs > ps case.
(8K block size, 4K page size)
After some more debugging, the ASSERT() is trigger by the following
sequence:
extent_writepage()
| We got a 32K folio (4 fs blocks) at file offset 0, and the fs block
| size is 8K, page size is 4K.
| And there is another 8K folio at file offset 32K, which is also
| dirty.
| So the filemap layout looks like the following:
|
| "||" is the filio boundary in the filemap.
| "//| is the dirty range.
|
| 0 8K 16K 24K 32K 40K
| |////////| |//////////////////////||////////|
|
|- writepage_delalloc()
| |- find_lock_delalloc_range() for [0, 8K)
| | Now range [0, 8K) is properly locked.
| |
| |- find_lock_delalloc_range() for [16K, 40K)
| | |- btrfs_find_delalloc_range() returned range [16K, 40K)
| | |- lock_delalloc_folios() locked folio 0 successfully
| | |
| | | The filemap range [32K, 40K) got dropped from filemap.
| | |
| | |- lock_delalloc_folios() failed with -EAGAIN on folio 32K
| | | As the folio at 32K is dropped.
| | |
| | |- loops = 1;
| | |- max_bytes = PAGE_SIZE;
| | |- goto again;
| | | This will re-do the lookup for dirty delalloc ranges.
| | |
| | |- btrfs_find_delalloc_range() called with @max_bytes == 4K
| | | This is smaller than block size, so
| | | btrfs_find_delalloc_range() is unable to return any range.
| | \- return false;
| |
| \- Now only range [0, 8K) has an OE for it, but for dirty range
| [16K, 32K) it's dirty without an OE.
| This breaks the assumption that writepage_delalloc() will find
| and lock all dirty ranges inside the folio.
|
|- extent_writepage_io()
|- submit_one_sector() for [0, 8K)
| Succeeded
|
|- submit_one_sector() for [16K, 24K)
Triggering the ASSERT(), as there is no OE, and the original
extent map is a hole.
Please note that, this also exposed the same problem for bs < ps
support. E.g. with 64K page size and 4K block size.
If we failed to lock a folio, and falls back into the "loops = 1;"
branch, we will re-do the search using 64K as max_bytes.
Which may fail again to lock the next folio, and exit early without
handling all dirty blocks inside the folio.
[FIX]
Instead of using the fixed size PAGE_SIZE as @max_bytes, use
@sectorsize, so that we are ensured to find and lock any remaining
blocks inside the folio.
And since we're here, add an extra ASSERT() to
before calling btrfs_find_delalloc_range() to make sure the @max_bytes is
at least no smaller than a block to avoid false negative.
Cc: stable@vger.kernel.org # 5.15+ Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
[ adapted folio terminology and API calls to page-based equivalents ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Testing has shown that reading multiple registers at once (for 10-bit
ADC values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for us.
This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.
Fixes: 6bac0606fdba ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250804133240.312383-1-hansg@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The max_register = 128 setting in the regmap config is not valid.
The Intel Dollar Cove TI PMIC has an eeprom unlock register at address 0x88
and a number of EEPROM registers at 0xF?. Increase max_register to 0xff so
that these registers can be accessed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20241208150028.325349-1-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 64e0d839c589 ("mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be
NULL even after EPF initialization. Then it is prudent to check that
they have non-NULL values before releasing the channels. Add the checks
in pci_epf_test_clean_dma_chan().
Without the checks, NULL pointer dereferences happen and they can lead
to a kernel panic in some cases:
Remove a surplus return statement from the void function that has been
added in the commit commit 8353813c88ef ("PCI: endpoint: Enable DMA
tests for endpoints with DMA capabilities").
Especially, as an empty return statements at the end of a void functions
serve little purpose.
This fixes the following checkpatch.pl script warning:
WARNING: void function return statements are not generally useful
#296: FILE: drivers/pci/endpoint/functions/pci-epf-test.c:296:
+ return;
+}
Link: https://lore.kernel.org/r/tencent_F250BEE2A65745A524E2EFE70CF615CA8F06@qq.com Signed-off-by: Wang Jiang <jiangwang@kylinos.cn>
[kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Stable-dep-of: 85afa9ea122d ("PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crash> struct trace_event_call ffffaf015340e528
struct trace_event_call {
...
perf_events = 0xffff0ad5fa89f088, //this value is correct, but x21 = 0
...
}
Race Condition Analysis:
The race occurs between kprobe activation and perf_events initialization:
CPU0 CPU1
==== ====
perf_kprobe_init
perf_trace_event_init
tp_event->perf_events = list;(1)
tp_event->class->reg (2)← KPROBE ACTIVE
Debug exception triggers
...
kprobe_dispatcher
kprobe_perf_func (tk->tp.flags & TP_FLAG_PROFILE)
head = this_cpu_ptr(call->perf_events)(3)
(perf_events is still NULL)
Problem:
1. CPU0 executes (1) assigning tp_event->perf_events = list
2. CPU0 executes (2) enabling kprobe functionality via class->reg()
3. CPU1 triggers and reaches kprobe_dispatcher
4. CPU1 checks TP_FLAG_PROFILE - condition passes (step 2 completed)
5. CPU1 calls kprobe_perf_func() and crashes at (3) because
call->perf_events is still NULL
CPU1 sees that kprobe functionality is enabled but does not see that
perf_events has been assigned.
Add pairing read and write memory barriers to guarantee that if CPU1
sees that kprobe functionality is enabled, it must also see that
perf_events has been assigned.
Patch series "Squashfs: performance improvement and a sanity check".
This patchset adds an additional sanity check when reading regular file
inodes, and adds support for SEEK_DATA/SEEK_HOLE lseek() whence values.
This patch (of 2):
Add an additional sanity check when reading regular file inodes.
A regular file if the file size is an exact multiple of the filesystem
block size cannot have a fragment. This is because by definition a
fragment block stores tailends which are not a whole block in size.
The device minor should not be cleared after the device is released.
Fixes: 9e14868dc952 ("media: mc: Clear minor number reservation at unregistration time") Cc: stable@vger.kernel.org Reported-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=031d0cfd7c362817963f Tested-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ moved clear_bit from media_devnode_release callback to media_devnode_unregister before put_device ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When completing emulation of instruction that generated a userspace exit
for I/O, don't recheck L1 intercepts as KVM has already finished that
phase of instruction execution, i.e. has already committed to allowing L2
to perform I/O. If L1 (or host userspace) modifies the I/O permission
bitmaps during the exit to userspace, KVM will treat the access as being
intercepted despite already having emulated the I/O access.
Pivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation.
Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the
intended "recipient") can reach the code in question. gp_interception()'s
use is mutually exclusive with is_guest_mode(), and
complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with
EMULTYPE_SKIP.
The bad behavior was detected by a syzkaller program that toggles port I/O
interception during the userspace I/O exit, ultimately resulting in a WARN
on vcpu->arch.pio.count being non-zero due to KVM no completing emulation
of the I/O instruction.
wcd934x_codec_parse_data() contains a device reference count leak in
of_slim_get_device() where device_find_child() increases the reference
count of the device but this reference is not properly decreased in
the success path. Add put_device() in wcd934x_codec_parse_data() and
add devm_add_action_or_reset() in the probe function, which ensures
that the reference count of the device is correctly managed.
Memory leak in regmap_init_slimbus() as the allocated regmap is not
released when the device is removed. Using devm_regmap_init_slimbus()
instead of regmap_init_slimbus() to ensure automatic regmap cleanup on
device removal.
Calling path: of_slim_get_device() -> of_find_slim_device() ->
device_find_child(). As comment of device_find_child() says, 'NOTE:
you will need to drop the reference with put_device() after use.'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://patch.msgid.link/20250923065212.26660-1-make24@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with clang-17 and older show an instance of
-Wframe-larger-than (which breaks the build with CONFIG_WERROR=y):
Introduce acpi_gbl_use_global_lock, which allows to skip the Global Lock
initialization. This is useful for systems without Global Lock (such as
loong_arch), so as to avoid error messages during boot phase:
ACPI Error: Could not enable global_lock event (20240827/evxfevnt-182)
ACPI Error: No response from Global Lock hardware, disabling lock (20240827/evglock-59)
Link: https://github.com/acpica/acpica/commit/463cb0fe Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzkaller found a path where ext4_xattr_inode_update_ref() reads an EA
inode refcount that is already <= 0 and then applies ref_change (often
-1). That lets the refcount underflow and we proceed with a bogus value,
triggering errors like:
EXT4-fs error: EA inode <n> ref underflow: ref_count=-1 ref_change=-1
EXT4-fs warning: ea_inode dec ref err=-117
Make the invariant explicit: if the current refcount is non-positive,
treat this as on-disk corruption, emit ext4_error_inode(), and fail the
operation with -EFSCORRUPTED instead of updating the refcount. Delete the
WARN_ONCE() as negative refcounts are now impossible; keep error reporting
in ext4_error_inode().
This prevents the underflow and the follow-on orphan/cleanup churn.
Currently, our handling of metadata is _ambiguous_ in some scenarios,
that is, we end up returning unknown if the range only covers the
mapping partially.
This is because earlier in ext4_getfsmap_meta_helper, we end up ignoring
any extent that starts before our queried range, but overlaps it. While
the man page [1] is a bit ambiguous on this, this fix makes the output
make more sense since we are anyways returning an "unknown" extent. This
is also consistent to how XFS does it:
projects / thirdparty / kernel / stable.git / log
