This small snippet of code ensures that we do something with the array
of RX software buffer descriptor elements after passing the skb to the
stack. In this case, we see if the other half of the page is reusable,
and if so, we "turn around" the buffers, making them directly usable by
enetc_refill_rx_ring() without going to enetc_new_page().
We will need to perform this kind of buffer flipping from a new code
path, i.e. from XDP_PASS. Currently, enetc_build_skb() does it there
buffer by buffer, but in a subsequent change we will stop using
enetc_build_skb() for XDP_PASS.
Assuming the VMM is QEMU. The vq->log_base is from QEMU userpace and can be
reclaimed via gfree(). As a result, this causes invalid memory writes to
QEMU userspace.
The control queue path has the same issue.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20250403063028.16045-2-dongli.zhang@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When adding folio_memcg function call in the zram module for
Android16-6.12, the following error occurs during compilation:
ERROR: modpost: "cgroup_mutex" [../soc-repo/zram.ko] undefined!
This error is caused by the indirect call to lockdep_is_held(&cgroup_mutex)
within folio_memcg. The export setting for cgroup_mutex is controlled by
the CONFIG_PROVE_RCU macro. If CONFIG_LOCKDEP is enabled while
CONFIG_PROVE_RCU is not, this compilation error will occur.
To resolve this issue, add a parallel macro CONFIG_LOCKDEP control to
ensure cgroup_mutex is properly exported when needed.
When CONFIG_NEED_DMA_MAP_STATE is not defined, dma-mapping clients might
report unused data compilation warnings for dma_unmap_*() calls
arguments. Redefine macros for those calls to let compiler to notice that
it is okay when the provided arguments are not used.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250415075659.428549-1-m.szyprowski@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The struct page->mapping, index fields are deprecated and soon to be only
available as part of a folio.
It is likely the intel_th code which sets page->mapping, index is was
implemented out of concern that some aspect of the page fault logic may
encounter unexpected problems should they not.
However, the appropriate interface for inserting kernel-allocated memory is
vm_insert_page() in a VM_MIXEDMAP. By using the helper function
vmf_insert_mixed() we can do this with minimal churn in the existing fault
handler.
By doing so, we bypass the remainder of the faulting logic. The pages are
still pinned so there is no possibility of anything unexpected being done
with the pages once established.
It would also be reasonable to pre-map everything on fault, however to
minimise churn we retain the fault handler.
We also eliminate all code which clears page->mapping on teardown as this
has now become unnecessary.
The MSU code relies on faulting to function correctly, so is by definition
dependent on CONFIG_MMU. We avoid spurious reports about compilation
failure for unsupported platforms by making this requirement explicit in
Kconfig as part of this change too.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20250331125608.60300-1-lorenzo.stoakes@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reports a data-race when accessing the event_triggered, here is the
simplified stack when the issue occurred:
==================================================================
BUG: KCSAN: data-race in virtqueue_disable_cb / virtqueue_enable_cb_delayed
write to 0xffff8881025bc452 of 1 bytes by task 3288 on cpu 0:
virtqueue_enable_cb_delayed+0x42/0x3c0 drivers/virtio/virtio_ring.c:2653
start_xmit+0x230/0x1310 drivers/net/virtio_net.c:3264
__netdev_start_xmit include/linux/netdevice.h:5151 [inline]
netdev_start_xmit include/linux/netdevice.h:5160 [inline]
xmit_one net/core/dev.c:3800 [inline]
read to 0xffff8881025bc452 of 1 bytes by interrupt on cpu 1:
virtqueue_disable_cb_split drivers/virtio/virtio_ring.c:880 [inline]
virtqueue_disable_cb+0x92/0x180 drivers/virtio/virtio_ring.c:2566
skb_xmit_done+0x5f/0x140 drivers/net/virtio_net.c:777
vring_interrupt+0x161/0x190 drivers/virtio/virtio_ring.c:2715
__handle_irq_event_percpu+0x95/0x490 kernel/irq/handle.c:158
handle_irq_event_percpu kernel/irq/handle.c:193 [inline]
value changed: 0x01 -> 0x00
==================================================================
When the data race occurs, the function virtqueue_enable_cb_delayed() sets
event_triggered to false, and virtqueue_disable_cb_split/packed() reads it
as false due to the race condition. Since event_triggered is an unreliable
hint used for optimization, this should only cause the driver temporarily
suggest that the device not send an interrupt notification when the event
index is used.
Fix this KCSAN reported data-race issue by explicitly tagging the access as
data_racy.
Reported-by: syzbot+efe683d57990864b8c8e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67c7761a.050a0220.15b4b9.0018.GAE@google.com/ Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Message-Id: <20250312130412.3516307-1-quic_zhonhan@quicinc.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Samsung UFS devices require additional time in hibern8 mode before
exiting, beyond the negotiated handshaking phase between the host and
device. Introduce a quirk to increase the PA_HIBERN8TIME parameter by
100 µs, a value derived from experiments, to ensure a proper hibernation
process.
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com> Link: https://lore.kernel.org/r/20250411121630.21330-3-quic_mapa@quicinc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
All platforms since Snapdragon 8 Gen1 (SM8450) require using 4-byte
reads to access QFPROM data. While older platforms were more than happy
with 1-byte reads, change the qfprom driver to use 4-byte reads for all
the platforms. Specify stride and word size of 4 bytes. To retain
compatibility with the existing DT and to simplify porting data from
vendor kernels, use fixup_dt_cell_info in order to bump alignment
requirements.
If NVMEM cell uses bit offset or specifies bit truncation, update
raw_len manually (following the cell->bytes update), ensuring that the
NVMEM access is still word-aligned.
Check that the NVMEM cell's raw_len is a aligned to word_size. Otherwise
Otherwise drivers might face incomplete read while accessing the last
part of the NVMEM cell.
The RK3588 has an offset into the OTP area where the readable area begins
and automatically adds this to the start address.
Other variants are very much similar to rk3588, just with a different
offset, so move that value into variant-data.
To match the size in bytes, store this value also in bytes and not in
number of blocks.
The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are
requested and configured by PHY users. The struct phy_ops APIs access the
same set of registers to configure all PHYs. Additionally, PHY settings can
be modified through sysfs or an IRQ handler. While some struct phy_ops APIs
are protected by a driver-wide mutex, others rely on individual
PHY-specific mutexes.
This approach can lead to various issues, including:
1/ the IRQ handler may interrupt PHY settings in progress, racing with
hardware configuration protected by a mutex lock
2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread
suspends to wait for the delay, another thread may try to configure
another PHY (with phy_init() + phy_power_on()); re-running the
phy_init() goes to the exact same configuration code, re-running the
same hardware configuration on the same set of registers (and bits)
which might impact the result of the msleep for the 1st configuring
thread
3/ sysfs can configure the hardware (though role_store()) and it can
still race with the phy_init()/phy_power_on() APIs calling into the
drivers struct phy_ops
To address these issues, add a spinlock to protect hardware register access
and driver private data structures (e.g., calls to
rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains
necessary as all PHY instances share common settings. With this change,
the existing mutex protection is removed and the cleanup.h helpers are
used.
While at it, to keep the code simpler, do not skip
regulator_enable()/regulator_disable() APIs in
rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the
regulators enable/disable operations are reference counted anyway.
Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration
to init") moved the IRQ request operation from probe to
struct phy_ops::phy_init API to avoid triggering interrupts (which lead to
register accesses) while the PHY clocks (enabled through runtime PM APIs)
are not active. If this happens, it results in a synchronous abort.
One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which
calls free_irq() on driver removal.
Move the IRQ request and free operations back to probe, and take the
runtime PM state into account in IRQ handler. This commit is preparatory
for the subsequent fixes in this series.
The Renesas RZ/G3S need to initialize the USB BUS before transferring data
due to hardware limitation. As the register that need to be touched for
this is in the address space of the USB PHY, and the UBS PHY need to be
initialized before any other USB drivers handling data transfer, add
support to initialize the USB BUS.
As the USB PHY is probed before any other USB drivers that enables
clocks and de-assert the reset signals and the BUS initialization is done
in the probe phase, we need to add code to de-assert reset signal and
runtime resume the device (which enables its clocks) before accessing
the registers.
As the reset signals are not required by the USB PHY driver for the other
USB PHY hardware variants, the reset signals and runtime PM was handled
only in the function that initialize the USB BUS.
The PHY initialization was done right after runtime PM enable to have
all in place when the PHYs are registered.
If navi_amd_register_client() fails, the previous i2c_dw_probe() call
should be undone by a corresponding i2c_del_adapter() call, as already done
in the remove function.
Commit 90312351fd1e ("i2c: designware: MASTER mode as separated driver")
introduced ->disable() callback but there is no real use for it. Both
i2c-designware-master.c and i2c-designware-slave.c set it to the same
i2c_dw_disable() and scope is inside the same kernel module.
That said, replace the callback by explicitly calling the i2c_dw_disable().
Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Stable-dep-of: 1cfe51ef07ca ("i2c: designware: Fix an error handling path in i2c_dw_pci_probe()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently initialization flow in i2c_dw_probe_master() skips a few steps
and has code duplication for polling mode implementation.
Simplify this by adding a new ACCESS_POLLING flag that is set for those
two platforms that currently use polling mode and use it to skip
interrupt handler setup.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Stable-dep-of: 1cfe51ef07ca ("i2c: designware: Fix an error handling path in i2c_dw_pci_probe()") Signed-off-by: Sasha Levin <sashal@kernel.org>
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178 Fixes: 2965e6355dcd ("drm/amd: Add Suspend/Hibernate notification callback support") Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 06f2dcc241e7e5c681f81fbc46cacdf4bfd7d6d7) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We used to take a lock in tegra186_utmi_bias_pad_power_on() but now we
have moved the lock into the caller. Unfortunately, when we moved the
lock this unlock was left behind and it results in a double unlock.
Delete it now.
Fixes: b47158fb4295 ("phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/aAjmR6To4EnvRl4G@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b15c87263a69 ("hwpoison, memory_hotplug: allow hwpoisoned pages to
be offlined) add page poison checks in do_migrate_range in order to make
offline hwpoisoned page possible by introducing isolate_lru_page and
try_to_unmap for hwpoisoned page. However folio lock must be held before
calling try_to_unmap. Add it to fix this problem.
Warning will be produced if folio is not locked during unmap:
When increasing the array size in memblock_double_array() and the slab
is not yet available, a call to memblock_find_in_range() is used to
reserve/allocate memory. However, the range returned may not have been
accepted, which can result in a crash when booting an SNP guest:
Mitigate this by calling accept_memory() on the memory range returned
before the slab is available.
Prior to v6.12, the accept_memory() interface used a 'start' and 'end'
parameter instead of 'start' and 'size', therefore the accept_memory()
call must be adjusted to specify 'start + size' for 'end' when applying
to kernels prior to v6.12.
Cc: stable@vger.kernel.org # see patch description, needs adjustments for <= 6.11 Fixes: dcdfdd40fa82 ("mm: Add support for unaccepted memory") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/da1ac73bf4ded761e21b4e4bb5178382a580cd73.1746725050.git.thomas.lendacky@amd.com Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LoongArch's toolchain may change the default code model from normal to
medium. This is unnecessary for kernel, and generates some relocations
which cannot be handled by the module loader. So explicitly specify the
code model to normal in Makefile (for Rust 'normal' is 'small').
When BPF_TRAMP_F_CALL_ORIG is enabled, the address of a bpf_tramp_image
struct on the stack is passed during the size calculation pass and
an address on the heap is passed during code generation. This may
cause a heap buffer overflow if the heap address is tagged because
emit_a64_mov_i64() will emit longer code than it did during the size
calculation pass. The same problem could occur without tag-based
KASAN if one of the 16-bit words of the stack address happened to
be all-ones during the size calculation pass. Fix the problem by
assuming the worst case (4 instructions) when calculating the size
of the bpf_tramp_image address emission.
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits.
Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64") Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Closes: https://lore.kernel.org/all/SJ0PR15MB461564D3F7E7A763498CA6A8CBDB2@SJ0PR15MB4615.namprd15.prod.outlook.com/ Link: https://lore.kernel.org/bpf/20240711151838.43469-1-puranjay@kernel.org
[Minor context change fixed.] Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nr_failed was missing the large folio splits from migrate_pages_batch()
and can cause a mismatch between migrate_pages() return value and the
number of not migrated pages, i.e., when the return value of
migrate_pages() is 0, there are still pages left in the from page list.
It will happen when a non-PMD THP large folio fails to migrate due to
-ENOMEM and is split successfully but not all the split pages are not
migrated, migrate_pages_batch() would return non-zero, but
astats.nr_thp_split = 0. nr_failed would be 0 and returned to the caller
of migrate_pages(), but the not migrated pages are left in the from page
list without being added back to LRU lists.
Fix it by adding a new nr_split counter for large folio splits and adding
it to nr_failed in migrate_page_sync() after migrate_pages_batch() is
done.
Link: https://lkml.kernel.org/r/20231017163129.2025214-1-zi.yan@sent.com Fixes: 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously firstly") Signed-off-by: Zi Yan <ziy@nvidia.com> Acked-by: Huang Ying <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory") Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com> Acked-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sri Jayaramappa <sjayaram@akamai.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the ucsi_con_mutex_lock / ucsi_con_mutex_unlock
functions to the UCSI driver. ucsi_con_mutex_lock ensures the connector
mutex is only locked if a connection is established and the partner pointer
is valid. This resolves a deadlock scenario where
ucsi_displayport_remove_partner holds con->mutex waiting for
dp_altmode_work to complete while dp_altmode_work attempts to acquire it.
Cc: stable <stable@kernel.org> Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250424084429.3220757-2-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a kernel panic seen during release FW in a stress test
scenario where WLAN and BT FW download occurs simultaneously, and due to
a HW bug, chip sends out only 1 bootloader signatures.
When driver receives the bootloader signature, it enters FW download
mode, but since no consequtive bootloader signatures seen, FW file is
not requested.
After 60 seconds, when FW download times out, release_firmware causes a
kernel panic.
Fixes: e3c4891098c8 ("Bluetooth: btnxpuart: Handle FW Download Abort scenario") Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The page allocator tracks the number of zones that have unaccepted memory
using static_branch_enc/dec() and uses that static branch in hot paths to
determine if it needs to deal with unaccepted memory.
Borislav and Thomas pointed out that the tracking is racy: operations on
static_branch are not serialized against adding/removing unaccepted pages
to/from the zone.
WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0
The comment around the WARN() explains the problem:
/*
* Warn about the '-1' case though; since that means a
* decrement is concurrent with a first (0->1) increment. IOW
* people are trying to disable something that wasn't yet fully
* enabled. This suggests an ordering problem on the user side.
*/
The effect of this static_branch optimization is only visible on
microbenchmark.
Instead of adding more complexity around it, remove it altogether.
Link: https://lkml.kernel.org/r/20250506133207.1009676-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Fixes: dcdfdd40fa82 ("mm: Add support for unaccepted memory") Link: https://lore.kernel.org/all/20250506092445.GBaBnVXXyvnazly6iF@fat_crate.local Reported-by: Borislav Petkov <bp@alien8.de> Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Reported-by: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Mon, 19 May 2025 20:43:42 +0000 (13:43 -0700)]
x86/its: Fix build error for its_static_thunk()
Due to a likely merge resolution error of backport commit 772934d9062a
("x86/its: FineIBT-paranoid vs ITS"), the function its_static_thunk() was
placed in the wrong ifdef block, causing a build error when
CONFIG_MITIGATION_ITS and CONFIG_FINEIBT are both disabled:
The idxd_cleanup() helper cleans up perfmon, interrupts, internals and
so on. Refactor remove call with the idxd_cleanup() helper to avoid code
duplication. Note, this also fixes the missing put_device() for idxd
groups, enginces and wqs.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Cc: stable@vger.kernel.org Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20250404120217.48772-10-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory allocated for idxd is not freed if an error occurs during
idxd_pci_probe(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Cc: stable@vger.kernel.org Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Link: https://lore.kernel.org/r/20250404120217.48772-8-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory allocated for idxd is not freed if an error occurs during
idxd_alloc(). To fix it, free the allocated memory in the reverse order
of allocation before exiting the function in case of an error.
The remove call stack is missing idxd cleanup to free bitmap, ida and
the idxd_device. Call idxd_free() helper routines to make sure we exit
gracefully.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Cc: stable@vger.kernel.org Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20250404120217.48772-9-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The idxd_cleanup_internals() function only decreases the reference count
of groups, engines, and wqs but is missing the step to release memory
resources.
To fix this, use the cleanup helper to properly release the memory
resources.
Fixes: ddf742d4f3f1 ("dmaengine: idxd: Add missing cleanup for early error out in probe call") Cc: stable@vger.kernel.org Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20250404120217.48772-6-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory allocated for groups is not freed if an error occurs during
idxd_setup_groups(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Memory allocated for engines is not freed if an error occurs during
idxd_setup_engines(). To fix it, free the allocated memory in the
reverse order of allocation before exiting the function in case of an
error.
Memory allocated for wqs is not freed if an error occurs during
idxd_setup_wqs(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Currently, a local dma_cap_mask_t variable is used to store device
cap_mask within udma_of_xlate(). However, the DMA_PRIVATE flag in
the device cap_mask can get cleared when the last channel is released.
This can happen right after storing the cap_mask locally in
udma_of_xlate(), and subsequent dma_request_channel() can fail due to
mismatch in the cap_mask. Fix this by removing the local dma_cap_mask_t
variable and directly using the one from the dma_device structure.
After a recent change [1] in clang's randstruct implementation to
randomize structures that only contain function pointers, there is an
error because qede_ll_ops get randomized but does not use a designated
initializer for the first member:
drivers/net/ethernet/qlogic/qede/qede_main.c:206:2: error: a randomized struct can only be initialized with a designated initializer
206 | {
| ^
Explicitly initialize the common member using a designated initializer
to fix the build.
A warning on driver removal started occurring after commit 9dd05df8403b
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().
Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2ac515a5d74f ("mt76: mt76x02: use napi polling for tx cleanup") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A delay unit of 0 is a valid entry, thus it is not valid to check for
unused delays. Instead, check the value field; if that is zero, the
given delay is unset.
Fixes: 4426e6b4ecf6 ("spi: tegra114: Don't fail set_cs_timing when delays are zero") Cc: stable@vger.kernel.org Signed-off-by: Aaron Kling <webgeek1234@gmail.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://patch.msgid.link/20250506-spi-tegra114-fixup-v1-1-136dc2f732f3@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The response buffer for the CREATE request handled by smb311_posix_mkdir()
is leaked on the error path (goto err_free_rsp_buf) because the structure
pointer *rsp passed to free_rsp_buf() is not assigned until *after* the
error condition is checked.
As *rsp is initialised to NULL, free_rsp_buf() becomes a no-op and the leak
is instead reported by __kmem_cache_shutdown() upon subsequent rmmod of
cifs.ko if (and only if) the error path has been hit.
Pass rsp_iov.iov_base to free_rsp_buf() instead, similar to the code in
other functions in smb2pdu.c for which *rsp is assigned late.
Cc: stable@vger.kernel.org Signed-off-by: Jethro Donaldson <devel@jro.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The REPORT ZONES buffer size is currently limited by the HBA's maximum
segment count to ensure the buffer can be mapped. However, the block
layer further limits the number of iovec entries to 1024 when allocating
a bio.
To avoid allocation of buffers too large to be mapped, further restrict
the maximum buffer size to BIO_MAX_INLINE_VECS.
Replace the UIO_MAXIOV symbolic name with the more contextually
appropriate BIO_MAX_INLINE_VECS.
Fixes: b091ac616846 ("sd_zbc: Fix report zones buffer allocation") Cc: stable@vger.kernel.org Signed-off-by: Steve Siwinski <ssiwinski@atto.com> Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common
to all PHYs. There is no need to set them every time a PHY is initialized.
Set timing register only when the 1st PHY is initialized.
It has been observed on the Renesas RZ/G3S SoC that unbinding and binding
the PHY driver leads to role autodetection failures. This issue occurs when
PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt
associated with the USB2_INT_ENABLE register (as
rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called
to initialize OTG without enabling PHY interrupts.
To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in
role_store(), role_show(), and rcar_gen3_init_otg(). At the same time,
rcar_gen3_init_otg() is only called when initialization for a PHY with
interrupt bits is in progress. As a result, the
struct rcar_gen3_phy::otg_initialized is no longer needed.
If device_add() fails, do not use device_unregister() for error
handling. device_unregister() consists two functions: device_del() and
put_device(). device_unregister() should only be called after
device_add() succeeded because device_del() undoes what device_add()
does if successful. Change device_unregister() to put_device() call
before returning from the function.
As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation uses bias_pad_enable as a reference count to
manage the shared bias pad for all UTMI PHYs. However, during system
suspension with connected USB devices, multiple power-down requests for
the UTMI pad result in a mismatch in the reference count, which in turn
produces warnings such as:
The root cause was traced back to the dynamic power-down changes
introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"),
where the UTMI pad was being powered down without verifying its current
state. This unbalanced behavior led to discrepancies in the reference
count.
To rectify this issue, this patch replaces the single reference counter
with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask
corresponds to one of the four USB2 PHYs, allowing us to track each pad's
enablement status individually.
With this change:
- The bias pad is powered on only when the mask is clear.
- Each UTMI pad is powered on or down based on its corresponding bit
in the mask, preventing redundant operations.
- The overall power state of the shared bias pad is maintained
correctly during suspend/resume cycles.
The mutex used to prevent race conditions during UTMI pad enable/disable
operations has been moved from the tegra186_utmi_bias_pad_power_on/off
functions to the parent functions tegra186_utmi_pad_power_on/down. This
change ensures that there are no race conditions when updating the bitmask.
Cc: stable@vger.kernel.org Fixes: a30951d31b25 ("xhci: tegra: USB2 pad power controls") Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20250408030905.990474-1-waynec@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining
callers. Remove it.
Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vmbus_sendpacket_mpb_desc() is currently used only by the storvsc driver
and is hardcoded to create a single GPA range. To allow it to also be
used by the netvsc driver to create multiple GPA ranges, no longer
hardcode as having a single GPA range. Allow the calling driver to
specify the rangecount in the supplied descriptor.
Update the storvsc driver to reflect this new approach.
Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-2-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
init_page_array() now always creates a single page buffer array entry
for the rndis message, even if the rndis message crosses a page
boundary. As such, the number of page buffer array entries used for
the rndis message must no longer be tracked -- it is always just 1.
Remove the rmsg_pgcnt field and use "1" where the value is needed.
Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-5-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Starting with commit dca5161f9bd0 ("hv_netvsc: Check status in
SEND_RNDIS_PKT completion message") in the 6.3 kernel, the Linux
driver for Hyper-V synthetic networking (netvsc) occasionally reports
"nvsp_rndis_pkt_complete error status: 2".[1] This error indicates
that Hyper-V has rejected a network packet transmit request from the
guest, and the outgoing network packet is dropped. Higher level
network protocols presumably recover and resend the packet so there is
no functional error, but performance is slightly impacted. Commit dca5161f9bd0 is not the cause of the error -- it only added reporting
of an error that was already happening without any notice. The error
has presumably been present since the netvsc driver was originally
introduced into Linux.
The root cause of the problem is that the netvsc driver in Linux may
send an incorrectly formatted VMBus message to Hyper-V when
transmitting the network packet. The incorrect formatting occurs when
the rndis header of the VMBus message crosses a page boundary due to
how the Linux skb head memory is aligned. In such a case, two PFNs are
required to describe the location of the rndis header, even though
they are contiguous in guest physical address (GPA) space. Hyper-V
requires that two rndis header PFNs be in a single "GPA range" data
struture, but current netvsc code puts each PFN in its own GPA range,
which Hyper-V rejects as an error.
The incorrect formatting occurs only for larger packets that netvsc
must transmit via a VMBus "GPA Direct" message. There's no problem
when netvsc transmits a smaller packet by copying it into a pre-
allocated send buffer slot because the pre-allocated slots don't have
page crossing issues.
After commit 14ad6ed30a10 ("net: allow small head cache usage with
large MAX_SKB_FRAGS values") in the 6.14-rc4 kernel, the error occurs
much more frequently in VMs with 16 or more vCPUs. It may occur every
few seconds, or even more frequently, in an ssh session that outputs a
lot of text. Commit 14ad6ed30a10 subtly changes how skb head memory is
allocated, making it much more likely that the rndis header will cross
a page boundary when the vCPU count is 16 or more. The changes in
commit 14ad6ed30a10 are perfectly valid -- they just had the side
effect of making the netvsc bug more prominent.
Current code in init_page_array() creates a separate page buffer array
entry for each PFN required to identify the data to be transmitted.
Contiguous PFNs get separate entries in the page buffer array, and any
information about contiguity is lost.
Fix the core issue by having init_page_array() construct the page
buffer array to represent contiguous ranges rather than individual
pages. When these ranges are subsequently passed to
netvsc_build_mpb_array(), it can build GPA ranges that contain
multiple PFNs, as required to avoid the error "nvsp_rndis_pkt_complete
error status: 2". If instead the network packet is sent by copying
into a pre-allocated send buffer slot, the copy proceeds using the
contiguous ranges rather than individual pages, but the result of the
copying is the same. Also fix rndis_filter_send_request() to construct
a contiguous range, since it has its own page buffer array.
This change has a side benefit in CoCo VMs in that netvsc_dma_map()
calls dma_map_single() on each contiguous range instead of on each
page. This results in fewer calls to dma_map_single() but on larger
chunks of memory, which should reduce contention on the swiotlb.
Since the page buffer array now contains one entry for each contiguous
range instead of for each individual page, the number of entries in
the array can be reduced, saving 208 bytes of stack space in
netvsc_xmit() when MAX_SKG_FRAGS has the default value of 17.
netvsc currently uses vmbus_sendpacket_pagebuffer() to send VMBus
messages. This function creates a series of GPA ranges, each of which
contains a single PFN. However, if the rndis header in the VMBus
message crosses a page boundary, the netvsc protocol with the host
requires that both PFNs for the rndis header must be in a single "GPA
range" data structure, which isn't possible with
vmbus_sendpacket_pagebuffer(). As the first step in fixing this, add a
new function netvsc_build_mpb_array() to build a VMBus message with
multiple GPA ranges, each of which may contain multiple PFNs. Use
vmbus_sendpacket_mpb_desc() to send this VMBus message to the host.
There's no functional change since higher levels of netvsc don't
maintain or propagate knowledge of contiguous PFNs. Based on its
input, netvsc_build_mpb_array() still produces a separate GPA range
for each PFN and the behavior is the same as with
vmbus_sendpacket_pagebuffer(). But the groundwork is laid for a
subsequent patch to provide the necessary grouping.
Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-3-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
smp_store_mb() inserts memory barrier after storing operation.
It is different with what the comment is originally aiming so Null
pointer dereference can be happened if memory update is reordered.
Signed-off-by: Hyejeong Choi <hjeong.choi@samsung.com> Fixes: a590d0fdbaa5 ("dma-buf: Update reservation shared_count after adding the new fence") CC: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250513020638.GA2329653@au1-maretx-p37.eng.sarc.samsung.com Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Microdia JP001 does not support reading the sample rate which leads to
many lines of "cannot get freq at ep 0x84".
This patch adds the USB ID to quirks.c and avoids those error messages.
usb 7-4: New USB device found, idVendor=0c45, idProduct=636b, bcdDevice= 1.00
usb 7-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 7-4: Product: JP001
usb 7-4: Manufacturer: JP001
usb 7-4: SerialNumber: JP001
usb 7-4: 3:1: cannot get freq at ep 0x84
A user reported on the Arch Linux Forums that their device is emitting
the following message in the kernel journal, which is fixed by adding
the quirk as submitted in this patch:
> kernel: usb 1-2: current rate 8436480 is different from the runtime rate 48000
There also is an entry for this product line added long time ago.
Their specific device has the following ID:
$ lsusb | grep Audio
Bus 001 Device 002: ID 1101:0003 EasyPass Industrial Co., Ltd Audioengine D1
The function snd_es1968_capture_open() calls the function
snd_pcm_hw_constraint_pow2(), but does not check its return
value. A proper implementation can be found in snd_cx25821_pcm_open().
Add error handling for snd_pcm_hw_constraint_pow2() and propagate its
error code.
The original PPTT code had a bug where the processor subtable length
was not correctly validated when encountering a truncated
acpi_pptt_processor node.
Commit 7ab4f0e37a0f4 ("ACPI PPTT: Fix coding mistakes in a couple of
sizeof() calls") attempted to fix this by validating the size is as
large as the acpi_pptt_processor node structure. This introduced a
regression where the last processor node in the PPTT table is ignored
if it doesn't contain any private resources. That results errors like:
ACPI PPTT: PPTT table found, but unable to locate core XX (XX)
ACPI: SPE must be homogeneous
Furthermore, it fails in a common case where the node length isn't
equal to the acpi_pptt_processor structure size, leaving the original
bug in a modified form.
Correct the regression by adjusting the loop termination conditions as
suggested by the bug reporters. An additional check performed after
the subtable node type is detected, validates the acpi_pptt_processor
node is fully contained in the PPTT table. Repeating the check in
acpi_pptt_leaf_node() is largely redundant as the node is already
known to be fully contained in the table.
The case where a final truncated node's parent property is accepted,
but the node itself is rejected should not be considered a bug.
Fixes: 7ab4f0e37a0f4 ("ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls") Reported-by: Maximilian Heyne <mheyne@amazon.de> Closes: https://lore.kernel.org/linux-acpi/20250506-draco-taped-15f475cd@mheyne-amazon/ Reported-by: Yicong Yang <yangyicong@hisilicon.com> Closes: https://lore.kernel.org/linux-acpi/20250507035124.28071-1-yangyicong@huawei.com/ Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Maximilian Heyne <mheyne@amazon.de> Cc: All applicable <stable@vger.kernel.org> # 7ab4f0e37a0f4: ACPI PPTT: Fix coding mistakes ... Link: https://patch.msgid.link/20250508023025.1301030-1-jeremy.linton@arm.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's expected that we'll encounter temporary exceptions
during aux transactions. Adjust logging from drm_info to
drm_dbg_dp to prevent flooding with unnecessary log messages.
Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250513032026.838036-1-Wayne.Lin@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9a9c3e1fe5256da14a0a307dff0478f90c55fc8c) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why]
Now forcing aux->transfer to return 0 when incomplete AUX write is
inappropriate. It should return bytes have been transferred.
[How]
aux->transfer is asked not to change original msg except reply field of
drm_dp_aux_msg structure. Copy the msg->buffer when it's write request,
and overwrite the first byte when sink reply 1 byte indicating partially
written byte number. Then we can return the correct value without
changing the original msg.
Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ac37f0dcd2e0b729fa7b5513908dc8ab802b540) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arch_uprobe_skip_sstep() returns true if instruction was emulated, that
is to say, there is no need to single step for the emulated instructions.
regs->csr_era will point to the destination address directly after the
exception, so the resume_era related code is redundant, just remove them.
When executing the "perf probe" and "perf stat" test cases about some
cryptographic algorithm, the output shows that "Trace/breakpoint trap".
This is because it uses the software singlestep breakpoint for uprobes
on LoongArch, and no need to use the hardware singlestep. So just remove
the related function call to user_{en,dis}able_single_step() for uprobes
on LoongArch.
How to reproduce:
Please make sure CONFIG_UPROBE_EVENTS is set and openssl supports sm2
algorithm, then execute the following command.
cd tools/perf && make
./perf probe -x /usr/lib64/libcrypto.so BN_mod_mul_montgomery
./perf stat -e probe_libcrypto:BN_mod_mul_montgomery openssl speed sm2
Fix MAX_REG_OFFSET calculation, make it point to the last register
in 'struct pt_regs' and not to the marker itself, which could allow
regs_get_register() to return an invalid offset.
Save and restore CSR.CNTC for hibernation which is similar to suspend.
For host this is unnecessary because sched clock is ensured continuous,
but for kvm guest sched clock isn't enough because rdtime.d should also
be continuous.
When CONFIG_PREEMPT_COUNT is not configured (i.e. CONFIG_PREEMPT_NONE/
CONFIG_PREEMPT_VOLUNTARY), preempt_disable() / preempt_enable() merely
acts as a barrier(). However, in these cases cond_resched() can still
trigger a context switch and modify the CSR.EUEN, resulting in do_fpu()
exception being activated within the kernel-fpu critical sections, as
demonstrated in the following path:
This patch is similar to commit d02198550423a0b (x86/fpu: Improve crypto
performance by making kernel-mode FPU reliably usable in softirqs). It
uses local_bh_disable() instead of preempt_disable() for non-RT kernels
so it can avoid the cond_resched() issue, and also extend the kernel-fpu
application scenarios to the softirq context.
UDF maintains total length of all extents in i_lenExtents. Generally we
keep extent lengths (and thus i_lenExtents) block aligned because it
makes the file appending logic simpler. However the standard mandates
that the inode size must match the length of all extents and thus we
trim the last extent when closing the file. To catch possible bugs we
also verify that i_lenExtents matches i_size when evicting inode from
memory. Commit b405c1e58b73 ("udf: refactor udf_next_aext() to handle
error") however broke the code updating i_lenExtents and thus
udf_evict_inode() ended up spewing lots of errors about incorrectly
sized extents although the extents were actually sized properly. Fix the
updating of i_lenExtents to silence the errors.
Fixes: b405c1e58b73 ("udf: refactor udf_next_aext() to handle error") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* The analysis is flawed and it's unclear what problem is being
fixed. There is no difference between wait_event_freezable_timeout()
and wait_event_timeout() with respect to device interrupts. And of
course "the interrupt notifying the finish of an operation happens
during wait_event_freezable_timeout()" -- that's how it's supposed
to work.
* The link at the "Closes:" tag appears to be an unrelated
use-after-free in idxd.
* It introduces a regression: dmatest threads are meant to be
freezable and this change breaks that.
See discussion here:
https://lore.kernel.org/dmaengine/878qpa13fe.fsf@AUSNATLYNCH.amd.com/
If there are still layout segments in the layout plh_return_lsegs list
after a layout return, we should be resetting the state to ensure they
eventually get returned as well.
Fixes: 68f744797edd ("pNFS: Do not free layout segments that are marked for return") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver is susceptible to a form of the bug explained in commit c26a2c2ddc01 ("gianfar: Fix TX timestamping with a stacked DSA driver")
and in Documentation/networking/timestamping.rst section "Other caveats
for MAC drivers", specifically it timestamps any skb which has
SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled
in adapter->hwtstamp_config.tx_type.
Evaluate the proper TX timestamping condition only once on the TX
path (in tsnep_xmit_frame_ring()) and store the result in an additional
TX entry flag. Evaluate the new TX entry flag in the TX confirmation path
(in tsnep_tx_poll()).
This way SKBTX_IN_PROGRESS is set by the driver as required, but never
evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set
by a stacked DSA driver and evaluating it would lead to unwanted
timestamps.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250514195657.25874-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The tsnep network controller is able to extend the descriptor directly
with data to be transmitted. In this case no TX data DMA address is
necessary. Instead of the TX data DMA address the TX data buffer is
placed at the end of the descriptor.
The descriptor is read with a 64 bytes DMA read by the tsnep network
controller. If the sum of descriptor data and TX data is less than or
equal to 64 bytes, then no additional DMA read is necessary to read the
TX data. Therefore, it makes sense to inline small fragments up to this
limit within the descriptor ring.
Inlined fragments need to be copied to the descriptor ring. On the other
hand DMA mapping is not necessary. At most 40 bytes are copied, so
copying should be faster than DMA mapping.
For A53 1.2 GHz copying takes <100ns and DMA mapping takes >200ns. So
inlining small fragments should result in lower CPU load. Performance
improvement is small. Thus, comparision of CPU load with and without
inlining of small fragments did not show any significant difference.
With this optimization less DMA reads will be done, which decreases the
load of the interconnect.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b3ca9eef6646 ("tsnep: fix timestamping with a stacked DSA driver") Signed-off-by: Sasha Levin <sashal@kernel.org>
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser") Signed-off-by: Pengtao He <hept.hept.hept@gmail.com> Link: https://patch.msgid.link/20250514132013.17274-1-hept.hept.hept@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver only offloads neighbors that are constructed on top of net
devices registered by it or their uppers (which are all Ethernet). The
device supports GRE encapsulation and decapsulation of forwarded
traffic, but the driver will not offload dummy neighbors constructed on
top of GRE net devices as they are not uppers of its net devices:
# ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1
# ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 NOARP
(Note that the neighbor is not marked with 'offload')
When the driver is reloaded and the existing configuration is replayed,
the driver does not perform the same check regarding existing neighbors
and offloads the previously added one:
# devlink dev reload pci/0000:01:00.0
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 offload NOARP
If the neighbor is later deleted, the driver will ignore the
notification (given the GRE net device is not its upper) and will
therefore keep referencing freed memory, resulting in a use-after-free
[1] when the net device is deleted:
# ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1
# ip link del dev gre1
Fix by skipping neighbor replay if the net device for which the replay
is performed is not our upper.
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type.
Reported-by: syzbot+4bcdddd48bb6f0be0da1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/680fd171.050a0220.2b69d1.045e.GAE@google.com/ Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/20250509184641.work.542-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since MTK_ESW_BIT is a bit number rather than a bitmap, it causes
MTK_HAS_CAPS to produce incorrect results. This leads to the ETH
driver not declaring MAC capabilities correctly for the MT7988 ESW.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC") Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/b8b37f409d1280fad9c4d32521e6207f63cd3213.1747110258.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
max20086_parse_regulators_dt() calls of_regulator_match() using an
array of struct of_regulator_match allocated on the stack for the
matches argument.
of_regulator_match() calls devm_of_regulator_put_matches(), which calls
devres_alloc() to allocate a struct devm_of_regulator_matches which will
be de-allocated using devm_of_regulator_put_matches().
struct devm_of_regulator_matches is populated with the stack allocated
matches array.
If the device fails to probe, devm_of_regulator_put_matches() will be
called and will try to call of_node_put() on that stack pointer,
generating the following dmesg entries:
max20086 6-0028: Failed to read DEVICE_ID reg: -121
kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet
kobject_put() is being called.
Followed by a stack trace matching the call flow described above.
Switch to allocating the matches array using devm_kcalloc() to
avoid accessing the stack pointer long after it's out of scope.
This also has the advantage of allowing multiple max20086 to probe
without overriding the data stored inside the global of_regulator_match.
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver") Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory
allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is
not freed. Fix that by jumping to the error path that frees them, by
calling qlcnic_free_mbx_args(). This was found using static analysis.
Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
MACsec offload is not supported in switchdev mode for uplink
representors. When switching to the uplink representor profile, the
MACsec offload feature must be cleared from the netdevice's features.
If left enabled, attempts to add offloads result in a null pointer
dereference, as the uplink representor does not support MACsec offload
even though the feature bit remains set.
Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features().
The only reason nvme_pci_npages_prp() could be used as a compile-time
known result in BUILD_BUG_ON() is because the compiler was always choosing
to inline the function. Under special circumstances (sanitizer coverage
functions disabled for __init functions on ARCH=um), the compiler decided
to stop inlining it:
drivers/nvme/host/pci.c: In function 'nvme_init':
include/linux/compiler_types.h:557:45: error: call to '__compiletime_assert_678' declared with attribute error: BUILD_BUG_ON failed: nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:538:25: note: in definition of macro '__compiletime_assert'
538 | prefix ## suffix(); \
| ^~~~~~
include/linux/compiler_types.h:557:9: note: in expansion of macro '_compiletime_assert'
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:50:9: note: in expansion of macro 'BUILD_BUG_ON_MSG'
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
drivers/nvme/host/pci.c:3804:9: note: in expansion of macro 'BUILD_BUG_ON'
3804 | BUILD_BUG_ON(nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS);
| ^~~~~~~~~~~~
Force it to be __always_inline to make sure it is always available for
use with BUILD_BUG_ON().
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505061846.12FMyRjj-lkp@intel.com/ Fixes: c372cdd1efdf ("nvme-pci: iod npages fits in s8") Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
It has been reported that when under a bridge with stp_state=1, the logs
get spammed with this message:
[ 251.734607] fsl_dpaa2_eth dpni.5 eth0: Couldn't decode source port
Further debugging shows the following info associated with packets:
source_port=-1, switch_id=-1, vid=-1, vbid=1
In other words, they are data plane packets which are supposed to be
decoded by dsa_tag_8021q_find_port_by_vbid(), but the latter (correctly)
refuses to do so, because no switch port is currently in
BR_STATE_LEARNING or BR_STATE_FORWARDING - so the packet is effectively
unexpected.
The error goes away after the port progresses to BR_STATE_LEARNING in 15
seconds (the default forward_time of the bridge), because then,
dsa_tag_8021q_find_port_by_vbid() can correctly associate the data plane
packets with a plausible bridge port in a plausible STP state.
Re-reading IEEE 802.1D-1990, I see the following:
"4.4.2 Learning: (...) The Forwarding Process shall discard received
frames."
IEEE 802.1D-2004 further clarifies:
"DISABLED, BLOCKING, LISTENING, and BROKEN all correspond to the
DISCARDING port state. While those dot1dStpPortStates serve to
distinguish reasons for discarding frames, the operation of the
Forwarding and Learning processes is the same for all of them. (...)
LISTENING represents a port that the spanning tree algorithm has
selected to be part of the active topology (computing a Root Port or
Designated Port role) but is temporarily discarding frames to guard
against loops or incorrect learning."
Well, this is not what the driver does - instead it sets
mac[port].ingress = true.
To get rid of the log spam, prevent unexpected data plane packets to
be received by software by discarding them on ingress in the LISTENING
state.
In terms of blame attribution: the prints only date back to commit d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based
on the VBID"). However, the settings would permit a LISTENING port to
forward to a FORWARDING port, and the standard suggests that's not OK.
Fixes: 640f763f98c2 ("net: dsa: sja1105: Add support for Spanning Tree Protocol") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250509113816.2221992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
