Rebinding 8250_omap in a loop will at some point produce a warning for
kernel/power/qos.c:296 cpu_latency_qos_update_request() with error
"cpu_latency_qos_update_request called for unknown object". Let's flush
the possibly pending PM QOS work scheduled from omap8250_runtime_suspend()
before we disable runtime PM.
On remove, we get an error for "Runtime PM usage count underflow!". I guess
this driver is mostly built-in, and this issue has gone unnoticed for a
while. Somehow I did not catch this issue with my earlier fix done with
commit 4e0f5cc65098 ("serial: 8250_omap: Fix probe and remove for PM
runtime").
Fixes: 4e0f5cc65098 ("serial: 8250_omap: Fix probe and remove for PM runtime") Signed-off-by: Tony Lindgren <tony@atomide.com>
Depends-on: dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") Link: https://lore.kernel.org/r/20221028105813.54290-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We were occasionally seeing the "Errata i202: timedout" on an AM335x
board when repeatedly opening and closing a UART connected to an active
sender. As new input may arrive at any time, it is possible to miss the
"RX FIFO empty" condition, forcing the loop to wait until it times out.
Nothing in the i202 Advisory states that such a wait is even necessary;
other FIFO clear functions like serial8250_clear_fifos() do not wait
either. For this reason, it seems safe to remove the wait, fixing the
mentioned issue.
There are cases where omap8250_set_mctrl() may get called after the
UART has already autoidled causing an asynchronous external abort.
This can happen on ttyport_open():
mem_serial_in from omap8250_set_mctrl+0x38/0xa0
omap8250_set_mctrl from uart_update_mctrl+0x4c/0x58
uart_update_mctrl from uart_dtr_rts+0x60/0xa8
uart_dtr_rts from tty_port_block_til_ready+0xd0/0x2a8
tty_port_block_til_ready from uart_open+0x14/0x1c
uart_open from ttyport_open+0x64/0x148
And on ttyport_close():
omap8250_set_mctrl from uart_update_mctrl+0x3c/0x48
uart_update_mctrl from uart_dtr_rts+0x54/0x9c
uart_dtr_rts from tty_port_shutdown+0x78/0x9c
tty_port_shutdown from tty_port_close+0x3c/0x74
tty_port_close from ttyport_close+0x40/0x58
It can also happen on disassociate_ctty() calling uart_shutdown()
that ends up calling omap8250_set_mctrl().
Let's fix the issue by adding missing PM runtime calls to
omap8250_set_mctrl(). To do this, we need to add __omap8250_set_mctrl()
that can be called from both omap8250_set_mctrl(), and from runtime PM
resume path when restoring the registers.
There's a special branch in the set_tdm_slot op for the case of nslots
being 1, but:
(1) That branch can never work (there's a check for tx_mask being
non-zero, later there's another check for it *being* zero; one or
the other always throws -EINVAL).
(2) The intention of the branch seems to be what the general other
branch reduces to in case of nslots being 1.
For those reasons remove the 'nslots being 1' special case.
Fixes: eae9f9ce181b ("ASoC: add tas2780 driver") Suggested-by: Jos Dehaes <jos.dehaes@gmail.com> Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20221027095800.16094-3-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There's a special branch in the set_tdm_slot op for the case of nslots
being 1, but:
(1) That branch can never work (there's a check for tx_mask being
non-zero, later there's another check for it *being* zero; one or
the other always throws -EINVAL).
(2) The intention of the branch seems to be what the general other
branch reduces to in case of nslots being 1.
For those reasons remove the 'nslots being 1' special case.
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Suggested-by: Jos Dehaes <jos.dehaes@gmail.com> Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20221027095800.16094-2-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There's a special branch in the set_tdm_slot op for the case of nslots
being 1, but:
(1) That branch can never work (there's a check for tx_mask being
non-zero, later there's another check for it *being* zero; one or
the other always throws -EINVAL).
(2) The intention of the branch seems to be what the general other
branch reduces to in case of nslots being 1.
For those reasons remove the 'nslots being 1' special case.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") Suggested-by: Jos Dehaes <jos.dehaes@gmail.com> Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20221027095800.16094-1-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
To support the deeper cluster idle state for sm8250 platforms, some
additional synchronization is needed between the rpmh-rsc device and the
CPU cluster PM domain. Until that is supported, let's disable the cluster
idle state.
This fixes a problem that has been reported for the Qcom RB5 platform (see
below), but most likely other sm8250 platforms suffers from similar issues,
so let's make the fix generic for sm8250.
vreg_l11c_3p3: failed to enable: -ETIMEDOUT
qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
BUG: KASAN: use-after-free in device_del+0xb5b/0xc60
Read of size 8 at addr ffff888008655050 by task rmmod/387
CPU: 2 PID: 387 Comm: rmmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl+0x79/0x9a
print_report+0x17f/0x47b
kasan_report+0xbb/0xf0
device_del+0xb5b/0xc60
platform_device_del.part.0+0x24/0x200
platform_device_unregister+0x2e/0x40
snd_soc_exit+0xa/0x22 [snd_soc_core]
__do_sys_delete_module.constprop.0+0x34f/0x5b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
</TASK>
It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail,
but its ret is ignored, which makes soc_dummy_dev unregistered twice.
snd_soc_init()
snd_soc_util_init()
platform_device_register_simple(soc_dummy_dev)
platform_driver_register() # fail
platform_device_unregister(soc_dummy_dev)
platform_driver_register() # success
...
snd_soc_exit()
snd_soc_util_exit()
# soc_dummy_dev will be unregistered for second time
To fix it, handle error and stop snd_soc_init() when util_init() fail.
Also clean debugfs when util_init() or driver_register() fail.
Fixes: fb257897bf20 ("ASoC: Work around allmodconfig failure") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Link: https://lore.kernel.org/r/20221028031603.59416-1-chenzhongjin@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The original fix "spi: stm32: Rate-limit the 'Communication suspended' message"
still leads to "stm32h7_spi_irq_thread: 1696 callbacks suppressed" spew in the
kernel log. Since this 'Communication suspended' message is a debug print, add
RATELIMIT_MSG_ON_RELEASE flag to inhibit the "callbacks suspended" part during
normal operation and only print summary at the end.
Fixes: ea8be08cc9358 ("spi: stm32: Rate-limit the 'Communication suspended' message") Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20221018183513.206706-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The size of the UFS PHY serdes register region is 0x1c8 and the
corresponding 'reg' property should specifically not include the
adjacent regions that are defined in the child node (e.g. tx and rx).
The first UFS host controller fails to start on the SA8540P automotive
board (QDrive3) due to the following errors:
ufshcd-qcom 1d84000.ufs: ufshcd_query_flag: Sending flag query for idn 18 failed, err = 253
ufshcd-qcom 1d84000.ufs: ufshcd_query_flag: Sending flag query for idn 18 failed, err = 253
ufshcd-qcom 1d84000.ufs: ufshcd_query_flag: Sending flag query for idn 18 failed, err = 253
ufshcd-qcom 1d84000.ufs: ufshcd_query_flag_retry: query attribute, opcode 5, idn 18, failed
with error 253 after 3 retries
The system eventually fails to boot with the warning:
gcc_ufs_phy_axi_clk status stuck at 'off'
This issue can be worked around by adding clk_ignore_unused to the
kernel command line since the system firmware sets up this clock for us.
Let's fix this issue by updating the ref clock on ufs_mem_phy. Note
that the downstream MSM 5.4 sources list this as ref_clk_parent. With
this patch, the SA8540P is able to be booted without clk_ignore_unused.
Signed-off-by: Brian Masney <bmasney@redhat.com> Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221006145529.755521-1-bmasney@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The GCC_UFS_REF_CLKREF_CLK must be enabled or the second UFS controller
fails to enumerate on sa8295p-adp.
Note that the vendor kernel enables both GCC_UFS_REF_CLKREF_CLK and
GCC_UFS_1_CARD_CLKREF_CLK and it is possible that the former should be
modelled as a parent of the latter. The clock driver also has a
GCC_UFS_CARD_CLKREF_CLK clock which the firmware appears to enable on
the ADP.
The usual lack of documentation for Qualcomm SoCs makes this a highly
annoying guessing game, but as the second controller works on the ADP
without either card reference clock enabled, only enable
GCC_UFS_REF_CLKREF_CLK for now.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221005143305.388-1-johan+linaro@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220829094903.v2.5.Ie446d5183d8b1e9ec4e32228ca300e604e3315eb@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
NOTE: while here, let's also remove the nonsensical
"regulator-allow-set-load" on the fixed regulator "vreg_s4a_1p8".
APCS DTS addition that was merged, was not supposed to get merged as it
was part of patch series that was superseded by 2 more patch series
that resolved issues with this one and greatly simplified things.
Since it already got merged, start by correcting the register space
size as APCS will not be providing regmap for PLL and it will conflict
with the standalone A53 PLL node.
Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.
With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.
To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.
Cc: stable@vger.kernel.org Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Suggested-by: Jim Mattson <jmattson@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Allow access to the percpu area via the GS segment base, which is
needed in order to access the saved host spec_ctrl value. In linux-next
FILL_RETURN_BUFFER also needs to access percpu data.
For simplicity, the physical address of the save area is added to struct
svm_cpu_data.
Cc: stable@vger.kernel.org Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reported-by: Nathan Chancellor <nathan@kernel.org> Analyzed-by: Andrew Cooper <andrew.cooper3@citrix.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The svm_data percpu variable is a pointer, but it is allocated via
svm_hardware_setup() when KVM is loaded. Unlike hardware_enable()
this means that it is never NULL for the whole lifetime of KVM, and
static allocation does not waste any memory compared to the status quo.
It is also more efficient and more easily handled from assembly code,
so do it and don't look back.
Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: e287bd005ad9 ("KVM: SVM: restore host save area from assembly") Signed-off-by: Sasha Levin <sashal@kernel.org>
The "cpu" field of struct svm_cpu_data has been write-only since commit 4b656b120249 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05).
Remove it.
Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: e287bd005ad9 ("KVM: SVM: restore host save area from assembly") Signed-off-by: Sasha Levin <sashal@kernel.org>
This change is very similar to the change that was made for shmem [1], and
it solves the same problem but for HugeTLBFS instead.
Currently, when poison is found in a HugeTLB page, the page is removed
from the page cache. That means that attempting to map or read that
hugepage in the future will result in a new hugepage being allocated
instead of notifying the user that the page was poisoned. As [1] states,
this is effectively memory corruption.
The fix is to leave the page in the page cache. If the user attempts to
use a poisoned HugeTLB page with a syscall, the syscall will fail with
EIO, the same error code that shmem uses. For attempts to map the page,
the thread will get a BUS_MCEERR_AR SIGBUS.
remove_huge_page removes a hugetlb page from the page cache. Change to
hugetlb_delete_from_page_cache as it is a more descriptive name.
huge_add_to_page_cache is global in scope, but only deals with hugetlb
pages. For consistency and clarity, rename to hugetlb_add_to_page_cache.
Link: https://lkml.kernel.org/r/20220914221810.95771-4-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 8625147cafaa ("hugetlbfs: don't delete error page from pagecache") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 2e8cff0a0eee87b2 ("arm64: fix rodata=full") addressed a couple of
issues with the rodata= kernel command line option, which is not a
simple boolean on arm64, and inadvertently got broken due to changes in
the generic bool handling.
Unfortunately, the resulting code never clears the rodata_full boolean
variable if it defaults to true and rodata=on or rodata=off is passed,
as the generic code is not aware of the existence of this variable.
Given the way this code is plumbed together, clearing rodata_full when
returning false from arch_parse_debug_rodata() may result in
inconsistencies if the generic code decides that it cannot parse the
right hand side, so the best way to deal with this is to only take
rodata_full in account if rodata_enabled is also true.
KFENCE requires linear map to be mapped at page granularity, so that it
is possible to protect/unprotect single pages, just like with
rodata_full and DEBUG_PAGEALLOC.
Instead of repating
can_set_direct_map() || IS_ENABLED(CONFIG_KFENCE)
make can_set_direct_map() handle the KFENCE case.
This also prevents potential false positives in kernel_page_present()
that may return true for non-present page if CONFIG_KFENCE is enabled.
There are two spelling mistakes in codec routing description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20221019071639.1003730-1-colin.i.king@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
smb sessions and tcons currently hang off primary channel only.
Secondary channels have the lists as empty. Whenever there's a
need to iterate sessions or tcons, we should use the list in the
corresponding primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
These servers are all on the public versions of the roadmap. The model
numbers for Grand Ridge, Granite Rapids, and Sierra Forest were included
in the September 2022 edition of the Instruction Set Extensions document.
l2cap_global_chan_by_psm shall not return fixed channels as they are not
meant to be connected by (S)PSM.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
Fix for some of the tool reported modes for FCLK
P-state deviations and UCLK P-state deviations that
are coming from DSC terms and/or Scaling terms
causing MinActiveFCLKChangeLatencySupported
and MaxActiveDRAMClockChangeLatencySupported
incorrectly calculated in DML for these configurations.
Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
The DST_after_scaler value that DML spreadsheet outputs is
generally the driver value round up to the nearest int.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
DSC config is calculated separately from DML calculations.
DML should use these separately calculated DSC params. The issue is
that the calculated bpp is not properly propagated into DML.
[How]
Correctly used forced_bpp value in DML.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
DCN32 DSC delay calculation had an unintentional integer division,
resulting in a mismatch against the DML spreadsheet.
[How]
Cast numerator to double before performing the division.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a system does not have swap and memory is under 100% usage,
amdgpu will fail to evict resources. Currently the suspend
carries on proceeding to reset the GPU:
At this point if the suspend actually succeeded I think that amdgpu
would have recovered because the GPU would have power cut off and
restored. However the kernel fails to continue the suspend from the
memory pressure and amdgpu fails to run the "resume" from the aborted
suspend.
```
ACPI: PM: Preparing to enter system sleep state S3
SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO)
cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0
node 0: slabs: 22, objs: 1122, free: 0
ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651)
To avoid this series of unfortunate events, fail amdgpu's suspend
when the memory eviction fails. This will let the system gracefully
recover and the user can try suspend again when the memory pressure
is relieved.
Reported-by: post@davidak.de Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch to fix the gdm3 start failure with virual display:
/usr/libexec/gdm-x-session[1711]: (II) AMDGPU(0): Setting screen physical size to 270 x 203
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument
/usr/libexec/gdm-x-session[1711]: (WW) AMDGPU(0): Failed to set mode on CRTC 0
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to enable any CRTC
gnome-shell[1840]: Running GNOME Shell (using mutter 42.2) as a X11 window and compositing manager
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument
vkms doesn't have modifiers support, set fb_modifiers_not_supported to bring the gdm back.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Missed enabling timing sync on DCN32 because DCN32 has a different DML
param.
Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Several places in the qgroup self tests follow the pattern of freeing the
ulist pointer they passed to btrfs_find_all_roots() if the call to that
function returned an error. That is pointless because that function always
frees the ulist in case it returns an error.
Also In some places like at test_multiple_refs(), after a call to
btrfs_qgroup_account_extent() we also leave "old_roots" and "new_roots"
pointing to ulists that were freed, because btrfs_qgroup_account_extent()
has freed those ulists, and if after that the next call to
btrfs_find_all_roots() fails, we call ulist_free() on the "old_roots"
ulist again, resulting in a double free.
So remove those calls to reduce the code size and avoid double ulist
free in case of an error.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The mode_valid field in drm_connector_helper_funcs is expected to be of
type:
enum drm_mode_status (* mode_valid) (struct drm_connector *connector,
struct drm_display_mode *mode);
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of imx_tve_connector_mode_valid should be changed from
int to enum drm_mode_status.
Dell Vostro 5568 laptop has lis3lv02d, but its i2c address is not known
to the kernel. Add this address.
Output of "cat /sys/devices/platform/lis3lv02d/position" on Dell Vostro
5568 laptop:
- Horizontal: (-18,0,1044)
- Front elevated: (522,-18,1080)
- Left elevated: (-18,-360,1080)
- Upside down: (36,108,-1134)
Signed-off-by: Nam Cao <namcaov@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the I2C controllers are running in DMA mode, it is the DMA engine
that performs the memory accesses rather than the I2C controller. Pass
the DMA engine's struct device pointer to the DMA API to make sure the
correct DMA operations are used.
This fixes an issue where the DMA engine's SMMU stream ID needs to be
misleadingly set for the I2C controllers in device tree.
Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
SCMI transports based on shared memory, at start of transmissions, have
to wait for the shared Tx channel area to be eventually freed by the
SCMI platform before accessing the channel. In fact the channel is owned
by the SCMI platform until marked as free by the platform itself and,
as such, cannot be used by the agent until relinquished.
As a consequence a badly misbehaving SCMI platform firmware could lock
the channel indefinitely and make the kernel side SCMI stack loop
forever waiting for such channel to be freed, possibly hanging the
whole boot sequence.
Add a timeout to the existent Tx waiting spin-loop so that, when the
system ends up in this situation, the SCMI stack can at least bail-out,
nosily warn the user, and abort the transmission.
Platform drivers .remove callbacks are not supposed to fail and report
errors. Such errors are indeed ignored by the core platform drivers
and the driver unbind process is anyway completed.
The SCMI core platform driver as it is now, instead, bails out reporting
an error in case of an explicit unbind request.
Fix the removal path by adding proper device links between the core SCMI
device and the SCMI protocol devices so that a full SCMI stack unbind is
triggered when the core driver is removed. The remove process does not
bail out anymore on the anomalous conditions triggered by an explicit
unbind but the user is still warned.
blk_mq_flush_plug_list() empties ->mq_list and request we'd peeked there
before that call is gone; in any case, we are not dealing with a mix
of requests for different queues now - there's no requests left in the
plug.
There's a build failure for Book3E without AltiVec:
Error: cc1: error: AltiVec not supported in this target
make[6]: *** [/linux/scripts/Makefile.build:250:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o] Error 1
This happens because the amdgpu build is only gated by
PPC_LONG_DOUBLE_128, but that symbol can be enabled even though AltiVec
is disabled.
The only user of PPC_LONG_DOUBLE_128 is amdgpu, so just add a dependency
on AltiVec to that symbol to fix the build.
0Day/LKP observed that the kselftest blocks forever since one of the
pidfd_wait doesn't terminate in 1 of 30 runs. After digging into
the source, we found that it blocks at:
ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WCONTINUED, NULL), 0);
wait_states has below testing flow:
CHILD PARENT
---------------+--------------
1 STOP itself
2 WAIT for CHILD STOPPED
3 SIGNAL CHILD to CONT
4 CONT
5 STOP itself
5' WAIT for CHILD CONT
6 WAIT for CHILD STOPPED
The problem is that the kernel cannot ensure the order of 5 and 5', once
5 goes first, the test will fail.
we can reproduce it by:
$ while true; do make run_tests -C pidfd; done
Introduce a blocking read in child process to make sure the parent can
check its WCONTINUED.
CC: Philip Li <philip.li@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The vop2 driver needs to explicitly disable the planes if the crtc is
disabled. Unless the planes are explicitly disabled, the address of the
last framebuffer is kept in the registers of the VOP2. When re-enabling
the encoder after it has been disabled by the driver, the VOP2 will
start and read the framebuffer that has been freed but is still pointed
to by the register. The iommu will catch these read accesses and print
errors.
Explicitly disable the planes when the crtc is disabled to reset the
registers.
If the vop2_plane_atomic_disable function is called with NULL as a
state, accessing the old_pstate runs into a null pointer exception.
However, the drm_atomic_helper_disable_planes_on_crtc function calls the
atomic_disable callback with state NULL.
Allow to disable a plane without passing a plane state by checking the
old_pstate only if a state is passed.
commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
Julius Brockmann reports that Inspiron 16 5625 suffers that same symptoms.
Add this other system to the list as well.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440 Reported-and-tested-by: Julius Brockmann <mail@juliusbrockmann.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a zero length is passed to kmalloc() it returns 0x10, which is
not a valid address. gss_unwrap_resp_integ() subsequently crashes
when it attempts to dereference that pointer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There's a small window where a LOCK sent during a delegation return can
race with another OPEN on client, but the open stateid has not yet been
updated. In this case, the client doesn't handle the OLD_STATEID error
from the server and will lose this lock, emitting:
"NFS: nfs4_handle_delegation_recall_error: unhandled error -10024".
Fix this by sending the task through the nfs4 error handling in
nfs4_lock_done() when we may have to reconcile our stateid with what the
server believes it to be. For this case, the result is a retry of the
LOCK operation with the updated stateid.
Reported-by: Gonzalo Siero Humet <gsierohu@redhat.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In raid56_alloc_missing_rbio(), if we can not determine where the
missing device is inside the full stripe, we just BUG_ON().
This is not necessary especially the only caller inside scrub.c is
already properly checking the return value, and will treat it as a
memory allocation failure.
Fix the error handling by:
- Add an extra warning for the reason
Although personally speaking it may be better to be an ASSERT().
A bug in the LSA code resulted in transfers slightly larger
than the mailbox size. Let us make it easier to catch similar
issues in future by adding a low level check.
Some x86/ACPI laptops with MIPI cameras have a LATT2021 ACPI device
in the _DEP dependency list of the ACPI devices for the camera-sensors
(which have flags.honor_deps set).
The _DDN for the LATT2021 device is "Lattice FW Update Client Driver",
suggesting that this is used for firmware updates of something. There
is no Linux driver for this and if Linux gets support for updates it
will likely be in userspace through fwupd.
For now add the LATT2021 HID to acpi_ignore_dep_ids[] so that
acpi_dev_ready_for_enumeration() will return true once the other _DEP
dependencies are met.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using a device based on DCN32/321,
we have an issue where a second
4k@60Hz display does not light up,
and the system becomes unresponsive
for a few minutes. In the debug process,
it was possible to see a hang
in the function dcn20_post_unlock_program_front_end
in this part:
The hubp_is_flip_pending always returns positive
for waiting pending flips which is a symptom of
pipe hang. Additionally, the dmesg log shows
this message after a few minutes:
This confirmed the hypothesis that we had a pipe
hanging somewhere. Next, after checking the
ftrace entries, we have the below weird
sequence:
[..]
2) | dcn10_lock_all_pipes [amdgpu]() {
2) 0.120 us | optc1_is_tg_enabled [amdgpu]();
2) | dcn20_pipe_control_lock [amdgpu]() {
2) | dc_dmub_srv_clear_inbox0_ack [amdgpu]() {
2) 0.121 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.551 us | }
2) | dc_dmub_srv_send_inbox0_cmd [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.511 us | }
2) | dc_dmub_srv_wait_for_inbox0_ack [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
[..]
We are not expected to read from dmub register
so many times and for so long. From the trace log,
it was possible to identify that the function
dcn20_pipe_control_lock was triggering the dmub
operation when it was unnecessary and causing
the hang issue. This commit drops the unnecessary
dmub code and, consequently, fixes the second display not
lighting up the issue.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
thinkpad_acpi was reporting 2 fans on a ThinkPad T14s gen 1, even though
the laptop has only 1 fan.
The second, not present fan always reads 65535 (-1 in 16 bit signed),
ignore fans which report 65535 to avoid reporting the non present fan.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com> Link: https://lore.kernel.org/r/20221019194751.5392-1-jvanderwaa@redhat.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Lenovo Thinkbook 14+ 2022 (ThinkBook 14 G4+ ARA) uses Ryzen
6000 processor, and has the same microphone problem as other
ThinkPads with AMD Ryzen 6000 series CPUs, which has been
listed in https://bugzilla.kernel.org/show_bug.cgi?id=216267.
Adding 21D0 to quirks table solves this microphone problem
for ThinkBook 14 G4+ ARA.
Don't use the test-specific header files as source files to force a
target dependency, as clang will complain if more than one source file
is used for a compile command with a single '-o' flag.
Use the proper Makefile variables instead as defined in
tools/testing/selftests/lib.mk.
Line In Bypass control is used as Master Capture at the moment
this is completely incorrect.
Current control routed to Mixer instead of ADC, thus can't affect
Capture path. ADC control shall be used instead.
ADC volume control parameters are different, so the patch fixes that
as well. Manual says (16.6.3.2 Programmable input attenuation amplifier:
PGATM) that gain varies in range 0dB..22.5dB with 1.5dB step.
DAC volume control is the Master Playback Volume at the moment
and it reports wrong levels in alsamixer and other alsa apps.
The patch fixes that, as stated in manual on the jz4725b SoC
(16.6.3.4 Programmable attenuation: GOD) the ctl range varies
from -22.5dB to 0dB with 1.5dB step.
According to documentation, the 64K erase opcode is located in VSCC
range [16:23] instead of [8:15].
Use the proper value to shift the mask over the correct range.
In wm8962 driver, the WM8962_ADDITIONAL_CONTROL_4 is used as a volatile
register, but this register mixes a bunch of volatile status bits and a
bunch of non-volatile control bits. The dapm widgets TEMP_HP and
TEMP_SPK leverages the control bits in this register. After the wm8962
probe, the regmap will bet set to cache only mode, then a read error
like below would be triggered when trying to read the initial power
state of the dapm widgets TEMP_HP and TEMP_SPK.
wm8962 0-001a: ASoC: error at soc_component_read_no_lock
on wm8962.0-001a: -16
In order to fix this issue, we add event handler to actually power
up/down these widgets. With this change, we also need to explicitly
power off these widgets in the wm8962 probe since they are enabled
by default.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Tested-by: Adam Ford <aford173@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221010092014.2229246-1-xiaolei.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It would be better to keep the pm_runtime enables before the
IRQ and component stuff. Both of those could start triggering
PM runtime events.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221008140522.134912-1-zhangqilong3@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Return value should be updated to zero in combined sequence routine
if transfer is completed successfully. Currently it holds timeout value
resulting in errors.
In adreno_unbind, we should clean up gpu device's drvdata to avoid
accessing a stale pointer during system suspend. Also, check for NULL
ptr in both system suspend/resume callbacks.
With use_codeword_fixup enabled, any return from
mtd_device_parse_register gets overwritten. Aside from the clear bug, this
is also problematic as a parser can EPROBE_DEFER and because this is not
correctly handled, the nand is never rescanned later in the bootup
process.
An example of this problem is when smem requires additional time to be
probed and nandc use qcomsmempart as parser. Parser will return
EPROBE_DEFER but in the current code this ret gets overwritten by
qcom_nand_host_parse_boot_partitions and qcom_nand_host_init_and_register
return 0.
Correctly handle the return code from mtd_device_parse_register so that
any error from this function is not ignored.
Fixes: 862bdedd7f4b ("mtd: nand: raw: qcom_nandc: add support for unprotected spare data pages") Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221021165304.19991-1-ansuelsmth@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The latest fix for the non-contiguous memalloc helper changed the
allocation method for a non-IOMMU system to use only the fallback
allocator. This should have worked, but it caused a problem sometimes
when too many non-contiguous pages are allocated that can't be treated
by HD-audio controller.
As a quirk workaround, go back to the original strategy: use
dma_alloc_noncontiguous() at first, and apply the fallback only when
it fails, but only for non-IOMMU case.
We'll need a better fix in the fallback code as well, but this
workaround should paper over most cases.
projects / thirdparty / kernel / stable.git / log
