Some buggy firmware implementations update VariableNameSize on success
such that it does not include the final NUL character which results in
garbage in the efivarfs name entries. Use kzalloc on the efivar_entry
(as is done in efivars.c) to ensure that the name is always
NUL-terminated.
The buggy firmware is:
BIOS Information
Vendor: Intel Corp.
Version: S1200RP.86B.02.02.0005.102320140911
Release Date: 10/23/2014
BIOS Revision: 4.6
System Information
Manufacturer: Intel Corporation
Product Name: S1200RP_SE
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Cc: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
skb_gso_segment has three possible return values:
1. a pointer to the first segmented skb
2. an errno value (IS_ERR())
3. NULL. This can happen when GSO is used for header verification.
However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL
and would oops when NULL is returned.
Note that these call sites should never actually see such a NULL return
value; all callers mask out the GSO bits in the feature argument.
However, there have been issues with some protocol handlers erronously not
respecting the specified feature mask in some cases.
It is preferable to get 'have to turn off hw offloading, else slow' reports
rather than 'kernel crashes'.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
There is an interesting bug in the vgic code, which manifests itself
when the KVM run loop has a signal pending or needs a vmid generation
rollover after having disabled interrupts but before actually switching
to the guest.
In this case, we flush the vgic as usual, but we sync back the vgic
state and exit to userspace before entering the guest. The consequence
is that we will be syncing the list registers back to the software model
using the GICH_ELRSR and GICH_EISR from the last execution of the guest,
potentially overwriting a list register containing an interrupt.
This showed up during migration testing where we would capture a state
where the VM has masked the arch timer but there were no interrupts,
resulting in a hung test.
Cc: Marc Zyngier <marc.zyngier@arm.com> Reported-by: Alex Bennee <alex.bennee@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
[ luis: backported to 3.16: used shannon's backport to 3.14 ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The kernel's pgd_index macro is designed to index a normal, page
sized array. KVM is a bit diffferent, as we can use concatenated
pages to have a bigger address space (for example 40bit IPA with
4kB pages gives us an 8kB PGD.
In the above case, the use of pgd_index will always return an index
inside the first 4kB, which makes a guest that has memory above
0x8000000000 rather unhappy, as it spins forever in a page fault,
whist the host happilly corrupts the lower pgd.
The obvious fix is to get our own kvm_pgd_index that does the right
thing(tm).
Tested on X-Gene with a hacked kvmtool that put memory at a stupidly
high address.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
[ luis: backported to 3.16: used shannon's backport to 3.14 ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Commit b856a59141b1 (arm/arm64: KVM: Reset the HCR on each vcpu
when resetting the vcpu) moved the init of the HCR register to
happen later in the init of a vcpu, but left out the fixup
done in kvm_reset_vcpu when preparing for a 32bit guest.
As a result, the 32bit guest is run as a 64bit guest, but the
rest of the kernel still manages it as a 32bit. Fun follows.
Moving the fixup to vcpu_reset_hcr solves the problem for good.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
It took about two years for someone to notice that the IPA passed
to TLBI IPAS2E1IS must be shifted by 12 bits. Clearly our reviewing
is not as good as it should be...
Paper bag time for me.
Reported-by: Mario Smarduch <m.smarduch@samsung.com> Tested-by: Mario Smarduch <m.smarduch@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
It is curently possible to run a VM with architected timers support
without creating an in-kernel VGIC, which will result in interrupts from
the virtual timer going nowhere.
To address this issue, move the architected timers initialization to the
time when we run a VCPU for the first time, and then only initialize
(and enable) the architected timers if we have a properly created and
initialized in-kernel VGIC.
When injecting interrupts from the virtual timer to the vgic, the
current setup should ensure that this never calls an on-demand init of
the VGIC, which is the only call path that could return an error from
kvm_vgic_inject_irq(), so capture the return value and raise a warning
if there's an error there.
We also change the kvm_timer_init() function from returning an int to be
a void function, since the function always succeeds.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
When the vgic initializes its internal state it does so based on the
number of VCPUs available at the time. If we allow KVM to create more
VCPUs after the VGIC has been initialized, we are likely to error out in
unfortunate ways later, perform buffer overflows etc.
Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Introduce a new function to unmap user RAM regions in the stage2 page
tables. This is needed on reboot (or when the guest turns off the MMU)
to ensure we fault in pages again and make the dcache, RAM, and icache
coherent.
Using unmap_stage2_range for the whole guest physical range does not
work, because that unmaps IO regions (such as the GIC) which will not be
recreated or in the best case faulted in on a page-by-page basis.
Call this function on secondary and subsequent calls to the
KVM_ARM_VCPU_INIT ioctl so that a reset VCPU will detect the guest
Stage-1 MMU is off when faulting in pages and make the caches coherent.
Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
When userspace resets the vcpu using KVM_ARM_VCPU_INIT, we should also
reset the HCR, because we now modify the HCR dynamically to
enable/disable trapping of guest accesses to the VM registers.
This is crucial for reboot of VMs working since otherwise we will not be
doing the necessary cache maintenance operations when faulting in pages
with the guest MMU off.
Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The implementation of KVM_ARM_VCPU_INIT is currently not doing what
userspace expects, namely making sure that a vcpu which may have been
turned off using PSCI is returned to its initial state, which would be
powered on if userspace does not set the KVM_ARM_VCPU_POWER_OFF flag.
Implement the expected functionality and clarify the ABI.
Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
If a VCPU was originally started with power off (typically to be brought
up by PSCI in SMP configurations), there is no need to clear the
POWER_OFF flag in the kernel, as this flag is only tested during the
init ioctl itself.
Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Instead of using kvm_is_mmio_pfn() to decide whether a host region
should be stage 2 mapped with device attributes, add a new static
function kvm_is_device_pfn() that disregards RAM pages with the
reserved bit set, as those should usually not be mapped as device
memory.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Some of the macros defined in kvm_arm.h are useful in assembly files, but are
not compatible with the assembler. Change any C language integer constant
definitions using appended U, UL, or ULL to the UL() preprocessor macro. Also,
add a preprocessor include of the asm/memory.h file which defines the UL()
macro.
Fixes build errors like these when using kvm_arm.h in assembly
source files:
Error: unexpected characters following instruction at operand 3 -- `and x0,x1,#((1U<<25)-1)'
Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
If we detect another vCPU is running we just exit and return 0 as if we
succesfully created the VGIC, but the VGIC wouldn't actual be created.
This shouldn't break in-kernel behavior because the kernel will not
observe the failed the attempt to create the VGIC, but userspace could
be rightfully confused.
Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Currently if using a 48-bit VA, tearing down the hyp page tables (which
can happen in the absence of a GICH or GICV resource) results in the
rather nasty splat below, evidently becasue we access a table that
doesn't actually exist.
Commit 38f791a4e499792e (arm64: KVM: Implement 48 VA support for KVM EL2
and Stage-2) added a pgd_none check to __create_hyp_mappings to account
for the additional level of tables, but didn't add a corresponding check
to unmap_range, and this seems to be the source of the problem.
This patch adds the missing pgd_none check, ensuring we don't try to
access tables that don't exist.
introduced some code in user_mem_abort that failed to compile if
STRICT_MM_TYPECHECKS was enabled.
This patch fixes up the failing comparison.
Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Kim Phillips <kim.phillips@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
When creating or moving a memslot, make sure the IPA space is within the
addressable range of the guest. Otherwise, user space can create too
large a memslot and KVM would try to access potentially unallocated page
table entries when inserting entries in the Stage-2 page tables.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
[ luis: backported to 3.16: used shannon's backport for 3.14 ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
On some platforms with no power management capabilities, the hotplug
implementation is allowed to return from a smp_ops.cpu_die() call as a
function return. Upon a CPU onlining event, the KVM CPU notifier tries
to reinstall the hyp stub, which fails on platform where no reset took
place following a hotplug event, with the message:
CPU1: smp_ops.cpu_die() returned, trying to resuscitate
CPU1: Booted secondary processor
Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x80409540
unexpected data abort in Hyp mode at: 0x80401fe8
unexpected HVC/SVC trap in Hyp mode at: 0x805c6170
since KVM code is trying to reinstall the stub on a system where it is
already configured.
To prevent this issue, this patch adds a check in the KVM hotplug
notifier that detects if the HYP stub really needs re-installing when a
CPU is onlined and skips the installation call if the stub is already in
place, which means that the CPU has not been reset.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The current aarch64 calculation for VTTBR_BADDR_MASK masks only 39 bits
and not all the bits in the PA range. This is clearly a bug that
manifests itself on systems that allocate memory in the higher address
space range.
[ Modified from Joel's original patch to be based on PHYS_MASK_SHIFT
instead of a hard-coded value and to move the alignment check of the
allocation to mmu.c. Also added a comment explaining why we hardcode
the IPA range and changed the stage-2 pgd allocation to be based on
the 40 bit IPA range instead of the maximum possible 48 bit PA range.
- Christoffer ]
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Joel Schopp <joel.schopp@amd.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The sgi values calculated in read_set_clear_sgi_pend_reg() and
write_set_clear_sgi_pend_reg() were horribly incorrectly multiplied by 4
with catastrophic results in that subfunctions ended up overwriting
memory not allocated for the expected purpose.
This showed up as bugs in kfree() and the kernel complaining a lot of
you turn on memory debugging.
This addresses: http://marc.info/?l=kvm&m=141164910007868&w=2
Reported-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
As it stands, nothing prevents userspace from injecting an interrupt
before the guest's GIC is actually initialized.
This goes unnoticed so far (as everything is pretty much statically
allocated), but ends up exploding in a spectacular way once we switch
to a more dynamic allocation (the GIC data structure isn't there yet).
The fix is to test for the "ready" flag in the VGIC distributor before
trying to inject the interrupt. Note that in order to avoid breaking
userspace, we have to ignore what is essentially an error.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
[ luis: backported to 3.16: used shannon's backport to 3.14 ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The ISS encoding for an exception from a Data Abort has a WnR
bit[6] that indicates whether the Data Abort was caused by a
read or a write instruction. While there are several fields
in the encoding that are only valid if the ISV bit[24] is set,
WnR is not one of them, so we can read it unconditionally.
Instead of fixing both implementations of kvm_is_write_fault()
in place, reimplement it just once using kvm_vcpu_dabt_iswrite(),
which already does the right thing with respect to the WnR bit.
Also fix up the callers to pass 'vcpu'
Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
[ luis: backported to 3.16: used shannon's backport to 3.14 ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
vgic_ioaddr_overlap claims to return a bool, but in reality it returns
an int. Shut sparse up by fixing the type signature.
Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
is_valid_cache returns true if the specified cache is valid.
Unfortunately, if the parameter passed it out of range, we return
-ENOENT, which ends up as true leading to potential hilarity.
This patch returns false on the failure path instead.
Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Running sparse results in a bunch of noisy address space mismatches
thanks to the broken __percpu annotation on kvm_get_running_vcpus.
This function returns a pcpu pointer to a pointer, not a pointer to a
pcpu pointer. This patch fixes the annotation, which kills the warnings
from sparse.
Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Sparse kicks up about a type mismatch for kvm_target_cpu:
arch/arm64/kvm/guest.c:271:25: error: symbol 'kvm_target_cpu' redeclared with different type (originally declared at ./arch/arm64/include/asm/kvm_host.h:45) - different modifiers
so fix this by adding the missing const attribute to the function
declaration.
Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
esr_el2 field of struct kvm_vcpu_fault_info has u32 type.
It should be stored as word. Current code works in LE case
because existing puts least significant word of x1 into
esr_el2, and it puts most significant work of x1 into next
field, which accidentally is OK because it is updated again
by next instruction. But existing code breaks in BE case.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
HSCTLR.EE is defined as bit[25] referring to arm manual
DDI0606C.b(p1590).
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Li Liu <john.liuli@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
I suspect this is a -ECUTPASTE fault from the initial implementation. If
we don't declare the register ID to be KVM_REG_ARM64 the KVM_GET_ONE_REG
implementation kvm_arm_get_reg() returns -EINVAL and hilarity ensues.
The kvm/api.txt document describes all arm64 registers as starting with
0x60xx... (i.e KVM_REG_ARM64).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
A userspace process can map device MMIO memory via VFIO or /dev/mem,
e.g., for platform device passthrough support in QEMU.
During early development, we found the PAGE_S2 memory type being used
for MMIO mappings. This patch corrects that by using the more strongly
ordered memory type for device MMIO mappings: PAGE_S2_DEVICE.
Signed-off-by: Kim Phillips <kim.phillips@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Currently when a KVM region is deleted or moved after
KVM_SET_USER_MEMORY_REGION ioctl, the corresponding
intermediate physical memory is not unmapped.
This patch corrects this and unmaps the region's IPA range
in kvm_arch_commit_memory_region using unmap_stage2_range.
Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
unmap_range() was utterly broken, to quote Marc, and broke in all sorts
of situations. It was also quite complicated to follow and didn't
follow the usual scheme of having a separate iterating function for each
level of page tables.
Address this by refactoring the code and introduce a pgd_clear()
function.
Reviewed-by: Jungseok Lee <jays.lee@samsung.com> Reviewed-by: Mario Smarduch <m.smarduch@samsung.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This is being reverted because it fixes a regression that was introduced
in 4.0 and does not affect 3.16 kernel.
Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Beata Michalska <b.michalska@samsung.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The incorrect ordering of operations during cpu dlpar add results in invalid
affinity for the cpu being added. The ibm,associativity property in the
device tree is populated with all zeroes for the added cpu which results in
invalid affinity mappings and all cpus appear to belong to node 0.
This occurs because rtas configure-connector is called prior to making the
rtas set-indicator calls. Phyp does not assign affinity information
for a cpu until the rtas set-indicator calls are made to set the isolation
and allocation state.
Correct the order of operations to make the rtas set-indicator
calls (done in dlpar_acquire_drc) before calling rtas configure-connector.
Fixes: 1a8061c46c46 ("powerpc/pseries: Add kernel based CPU DLPAR handling") Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Fixes: 9e311e7 ("net/mlx4_en: Use affinity hint") Acked-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact,
it is sent only at the end of a dump.
Libraries like libnl will wait forever for NLMSG_DONE.
Fixes: 37a393bc4932 ("bridge: notify mdb changes via netlink") CC: Cong Wang <amwang@redhat.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: bridge@lists.linux-foundation.org Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
fallocate() checks that the file is extent-based and returns
EOPNOTSUPP in case is not. Other tasks can convert from and to
indirect and extent so it's safe to check only after grabbing
the inode mutex.
Signed-off-by: Davide Italiano <dccitaliano@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Currently it is possible to lose whole file system block worth of data
when we hit the specific interaction with unwritten and delayed extents
in status extent tree.
The problem is that when we insert delayed extent into extent status
tree the only way to get rid of it is when we write out delayed buffer.
However there is a limitation in the extent status tree implementation
so that when inserting unwritten extent should there be even a single
delayed block the whole unwritten extent would be marked as delayed.
At this point, there is no way to get rid of the delayed extents,
because there are no delayed buffers to write out. So when a we write
into said unwritten extent we will convert it to written, but it still
remains delayed.
When we try to write into that block later ext4_da_map_blocks() will set
the buffer new and delayed and map it to invalid block which causes
the rest of the block to be zeroed loosing already written data.
For now we can fix this by simply not allowing to set delayed status on
written extent in the extent status tree. Also add WARN_ON() to make
sure that we notice if this happens in the future.
This problem can be easily reproduced by running the following xfs_io.
This can be theoretically also reproduced by at random by running fsx,
but it's not very reliable, though on machines with bigger page size
(like ppc) this can be seen more often (especially xfstest generic/127)
When we end I/O struct request with error, we need to pass
obj_request->length as @nr_bytes so that the entire obj_request worth
of bytes is completed. Otherwise block layer ends up confused and we
trip on
in rbd_img_obj_callback() due to more being true no matter what. We
already do it in most cases but we are missing some, in particular
those where we don't even get a chance to submit any obj_requests, due
to an early -ENOMEM for example.
A number of obj_request->xferred assignments seem to be redundant but
I haven't touched any of obj_request->xferred stuff to keep this small
and isolated.
Cc: Alex Elder <elder@linaro.org> Reported-by: Shawn Edwards <lesser.evil@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Looks like audigy emu10k2 (probably emu10k1 - sb live too) support two
modes for DMA. Second mode is useful for 64 bit os with more then 2 GB
of ram (fixes problems with big soundfont loading)
1) 32MB from 2 GB address space using 8192 pages (used now as default)
2) 16MB from 4 GB address space using 4096 pages
Mode is set using HCFG_EXPANDED_MEM flag in HCFG register.
Also format of emu10k2 page table is then different.
Signed-off-by: Peter Zubaj <pzubaj@marticonet.sk> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This patch addresses the deadlock by reducing the rance taking
emux->register_mutex in snd_emux_open_seq_oss(). The lock is needed
for the refcount handling, so move it locally. The calls in
emux_seq.c are already with the mutex, thus they are replaced with the
version without mutex lock/unlock.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Maxburst was not set when doing the dma slave configuration. This value
is checked by the recently introduced xdmac. It causes an error when
doing the slave configuration and so prevents from using dma.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Do not probe all serial drivers by of_serial.c which are using
device_type = "serial"; property. Only drivers which have valid
compatible strings listed in the driver should be probed.
When PORT_UNKNOWN is setup probe will fail anyway.
Arnd quotation about driver historical background:
"when I wrote that driver initially, the idea was that it would
get used as a stub to hook up all other serial drivers but after
that, the common code learned to create platform devices from DT"
This patch fix the problem with on the system with xilinx_uartps and
16550a where of_serial failed to register for xilinx_uartps and because
of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking
for irq with request_irq() EINVAL is returned.
Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
For systems with CONFIG_SERIAL_OF_PLATFORM=y and device_type =
"serial"; property in DT of_serial.c driver maps and unmaps IRQ (because
driver probe fails). Then a driver is called but irq mapping is not
created that's why driver is failing again in again on request_irq().
Based on this use platform_get_irq() instead of platform_get_resource()
which is doing irq_desc allocation and driver itself can request IRQ.
Fix both xilinx serial drivers in the tree.
Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
It added some sanity checks to ignore potential garbage in CDC headers but
also introduced a potential infinite loop. This can happen at the first
loop iteration (elength = 0 in that case) if the description isn't a
DT_CS_INTERFACE or later if 'buffer[0]' is zero.
It should also be noted that the wrong length was being added to 'buffer'
in case 'buffer[1]' was not a DT_CS_INTERFACE descriptor, since elength was
assigned after that check in the loop.
A specially crafted USB device could be used to trigger this infinite loop.
Fixes: 7e860a6e7aa6 ("cdc-acm: add sanity checks") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> CC: Oliver Neukum <oneukum@suse.de> CC: Adam Lee <adam8157@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Wrongly release mutex lock during otg_statemachine may result in re-enter
otg_statemachine, which is not allowed, we should do next state transtition
after previous one completed.
Fixes: 826cfe751f3e ("usb: chipidea: add OTG fsm operation functions implementation") Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Testing has shown that ASM1053 devices do not work properly with transfers
larger than 240 sectors, so set max_sectors to 240 on these.
Reported-by: Steve Bangert <sbangert@frontier.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Steve Bangert <sbangert@frontier.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The usb-storage driver sets max_sectors = 240 in its scsi-host template,
for uas we do not want to do that for all devices, but testing has shown
that some devices need it.
This commit adds a US_FL_MAX_SECTORS_240 flag for such devices, and
implements support for it in uas.c, while at it it also adds support
for US_FL_MAX_SECTORS_64 to uas.c.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
uas_use_uas_driver may set some US_FL_foo flags during detection, currently
these are stored in a local variable and then throw away, but these may be
of interest to the caller, so add an extra parameter to (optionally) return
the detected flags, and use this in the uas driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The 3w-9xxx driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point. Also remove the dma mapping helpers
which have another inherent race due to the request_id index.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The 3w-xxxx driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point. Also remove the dma mapping helpers
which have another inherent race due to the request_id index.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The 3w-sas driver needs to tear down the dma mappings before returning
the command to the midlayer, as there is no guarantee the sglist and
count are valid after that point. Also remove the dma mapping helpers
which have another inherent race due to the request_id index.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Torsten Luettgert <ml-lkml@enda.eu> Tested-by: Bernd Kardatzki <Bernd.Kardatzki@med.uni-tuebingen.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This works around a issue with qnap iscsi targets not handling large IOs
very well.
The target returns:
VPD INQUIRY: Block limits page (SBC)
Maximum compare and write length: 1 blocks
Optimal transfer length granularity: 1 blocks
Maximum transfer length: 4294967295 blocks
Optimal transfer length: 4294967295 blocks
Maximum prefetch, xdread, xdwrite transfer length: 0 blocks
Maximum unmap LBA count: 8388607
Maximum unmap block descriptor count: 1
Optimal unmap granularity: 16383
Unmap granularity alignment valid: 0
Unmap granularity alignment: 0
Maximum write same length: 0xffffffff blocks
Maximum atomic transfer length: 0
Atomic alignment: 0
Atomic transfer length granularity: 0
and it is *sometimes* able to handle at least one IO of size up to 8 MB. We
have seen in traces where it will sometimes work, but other times it
looks like it fails and it looks like it returns failures if we send
multiple large IOs sometimes. Also it looks like it can return 2 different
errors. It will sometimes send iscsi reject errors indicating out of
resources or it will send invalid cdb illegal requests check conditions.
And then when it sends iscsi rejects it does not seem to handle retries
when there are command sequence holes, so I could not just add code to
try and gracefully handle that error code.
The problem is that we do not have a good contact for the company,
so we are not able to determine under what conditions it returns
which error and why it sometimes works.
So, this patch just adds a new black list flag to set targets like this to
the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19
caused this regression, so I also ccing stable.
Reported-by: Christian Hesse <list@eworm.de> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Basically snd_emux_detach_seq() doesn't need a protection of
emu->register_mutex as it's already being unregistered. So, we can
get rid of this for avoiding the deadlock.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Some models provide too long string for the shortname that has 32bytes
including the terminator, and it results in a non-terminated string
exposed to the user-space. This isn't too critical, though, as the
string is stopped at the succeeding longname string.
This patch fixes such entries by dropping "SB" prefix (it's enough to
fit within 32 bytes, so far). Meanwhile, it also changes strcpy()
with strlcpy() to make sure that this kind of problem won't happen in
future, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Buffers allocated by dma_alloc_coherent() are always zeroed on Alpha,
ARM (32bit), MIPS, PowerPC, x86/x86_64 and probably other architectures.
It turned out that some drivers rely on this 'feature'. Allocated buffer
might be also exposed to userspace with dma_mmap() call, so clearing it
is desired from security point of view to avoid exposing random memory
to userspace. This patch unifies dma_alloc_coherent() behavior on ARM64
architecture with other implementations by unconditionally zeroing
allocated buffer.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
[ luis: backported to 3.16:
- dropped changes to __alloc_from_pool() which doesn't exist in 3.16 ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The mute-LED mode control has the fixed on/off states that are
supposed to remain on/off regardless of the master switch. However,
this doesn't work actually because the vmaster hook is called in the
vmaster code itself.
This patch fixes it by calling the hook indirectly after checking the
mute LED mode.
Reported-and-tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Whenever the check for a send in progress introduced in commit 521e0546c970 (btrfs: protect snapshots from deleting during send) is
hit, we return without unlocking inode->i_mutex. This is easy to see
with lockdep enabled:
[ +0.000059] ================================================
[ +0.000028] [ BUG: lock held when returning to user space! ]
[ +0.000029] 4.0.0-rc5-00096-g3c435c1 #93 Not tainted
[ +0.000026] ------------------------------------------------
[ +0.000029] btrfs/211 is leaving the kernel with locks still held!
[ +0.000029] 1 lock held by btrfs/211:
[ +0.000023] #0: (&type->i_mutex_dir_key){+.+.+.}, at: [<ffffffff8135b8df>] btrfs_ioctl_snap_destroy+0x2df/0x7a0
Make sure we unlock it in the error path.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The PLL output will be unstable in some cases. We can fix it by
setting some registers.
Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Correct small copy and paste error where autodisable was not being
enabled for the SOC_DAPM_SINGLE_TLV_AUTODISABLE control.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The only users of collect_mounts are in audit_tree.c
In audit_trim_trees and audit_add_tree_rule the path passed into
collect_mounts is generated from kern_path passed an audit_tree
pathname which is guaranteed to be an absolute path. In those cases
collect_mounts is obviously intended to work on mounted paths and
if a race results in paths that are unmounted when collect_mounts
it is reasonable to fail early.
The paths passed into audit_tag_tree don't have the absolute path
check. But are used to play with fsnotify and otherwise interact with
the audit_trees, so again operating only on mounted paths appears
reasonable.
Avoid having to worry about what happens when we try and audit
unmounted filesystems by restricting collect_mounts to mounts
that appear in the mount tree.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Running mtd-utils/tests/ubi-tests/io_basic.c could cause
soft lockup or watchdog reset. It is because *updatevol*
will perform ubi_check_volume() after updating finish
and this function will full scan the updated lebs if the
volume is initialized as STATIC_VOLUME.
This patch adds *cond_resched()* in the loop of lebs scan
to avoid soft lockup.
Helped by Richard Weinberger <richard@nod.at>
[ 2158.067096] INFO: rcu_sched self-detected stall on CPU { 1} (t=2101 jiffies g=1606 c=1605 q=56)
[ 2158.172867] CPU: 1 PID: 2073 Comm: io_basic Tainted: G O 3.10.53 #21
[ 2158.172898] [<c000f624>] (unwind_backtrace+0x0/0x120) from [<c000c294>] (show_stack+0x10/0x14)
[ 2158.172918] [<c000c294>] (show_stack+0x10/0x14) from [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660)
[ 2158.172936] [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) from [<c002b480>] (update_process_times+0x38/0x64)
[ 2158.172953] [<c002b480>] (update_process_times+0x38/0x64) from [<c005ff38>] (tick_sched_handle+0x54/0x60)
[ 2158.172966] [<c005ff38>] (tick_sched_handle+0x54/0x60) from [<c00601ac>] (tick_sched_timer+0x44/0x74)
[ 2158.172978] [<c00601ac>] (tick_sched_timer+0x44/0x74) from [<c003f348>] (__run_hrtimer+0xc8/0x1b8)
[ 2158.172992] [<c003f348>] (__run_hrtimer+0xc8/0x1b8) from [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4)
[ 2158.173007] [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) from [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30)
[ 2158.173022] [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) from [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124)
[ 2158.173036] [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) from [<c0082bd8>] (generic_handle_irq+0x20/0x30)
[ 2158.173049] [<c0082bd8>] (generic_handle_irq+0x20/0x30) from [<c000969c>] (handle_IRQ+0x64/0x8c)
[ 2158.173060] [<c000969c>] (handle_IRQ+0x64/0x8c) from [<c0008544>] (gic_handle_irq+0x3c/0x60)
[ 2158.173074] [<c0008544>] (gic_handle_irq+0x3c/0x60) from [<c02f0f80>] (__irq_svc+0x40/0x50)
[ 2158.173083] Exception stack(0xc4043c98 to 0xc4043ce0)
[ 2158.173092] 3c80: c4043ce400000019
[ 2158.173102] 3ca0: 1f8a865fc050ad101f8a864c00000031c04b59700003ebce00000000f3550000
[ 2158.173113] 3cc0: bf00bc68000008000003ebcec4043ce0c0186d14c0186cb880000013ffffffff
[ 2158.173130] [<c02f0f80>] (__irq_svc+0x40/0x50) from [<c0186cb8>] (read_current_timer+0x4/0x38)
[ 2158.173145] [<c0186cb8>] (read_current_timer+0x4/0x38) from [<1f8a865f>] (0x1f8a865f)
[ 2183.927097] BUG: soft lockup - CPU#1 stuck for 22s! [io_basic:2073]
[ 2184.002229] Modules linked in: nandflash(O) [last unloaded: nandflash]
Signed-off-by: Wang Kai <morgan.wang@huawei.com> Signed-off-by: hujianyang <hujianyang@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
A malicious signal handler / restorer can DOS the system by fudging the
user regs saved on stack, causing weird things such as sigreturn returning
to user mode PC but cpu state still being kernel mode....
Ensure that in sigreturn path status32 always has U bit; any other bogosity
(gargbage PC etc) will be taken care of by normal user mode exceptions mechanisms.
It appears that the BayTrail-T class of hardware requires EFI in order
to powerdown and reboot and no other reliable method exists.
This quirk is generally applicable to all hardware that has the ACPI
Hardware Reduced bit set, since usually ACPI would be the preferred
method.
Cc: Len Brown <len.brown@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk>
[ luis: backported to 3.16:
- move changes from quirks.c into efi.c
- adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Not only can EfiResetSystem() be used to reboot, it can also be used to
power down machines.
By and large, this functionality doesn't work very well across the range
of EFI machines in the wild, so it should definitely only be used as a
last resort. In an ideal world, this wouldn't be needed at all.
Unfortunately, we're starting to see machines where EFI is the *only*
reliable way to power down, and nothing else, not PCI, not ACPI, works.
efi_poweroff_required() should be implemented on a per-architecture
basis, since exactly when we should be using EFI runtime services is a
platform-specific decision. There's no analogue for reboot because each
architecture handles reboot very differently - the x86 code in
particular is pretty complex.
Patches to enable this for specific classes of hardware will be
submitted separately.
Tested-by: Mark Salter <msalter@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Implement efi_reboot(), which is really just a wrapper around the
EfiResetSystem() EFI runtime service, but it does at least allow us to
funnel all callers through a single location.
It also simplifies the callsites since users no longer need to check to
see whether EFI_RUNTIME_SERVICES are enabled.
Cc: Tony Luck <tony.luck@intel.com> Tested-by: Mark Salter <msalter@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
When system is out of memory, refilling of RX buffers fails while
the driver continue to pass the received packets to the kernel stack.
At some point, when all RX buffers deplete, driver may fall into a
sleep, and not recover when memory for new RX buffers is once again
availible. This is because hardware does not have valid descriptors,
so no interrupt will be generated for the driver to return to work
in napi context. Fix it by schedule the napi poll function from
stats_task delayed workqueue, as long as the allocations fail.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
By default, the number of tx queues is limited by the number of online cpus
in mlx4_en_get_profile(). However, this limit no longer holds after the
ethtool .set_channels method has been called. In that situation, the driver
may access invalid bits of certain cpumask variables when queue_index >=
nr_cpu_ids.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Acked-by: Ido Shamay <idos@mellanox.com> Fixes: d03a68f ("net/mlx4_en: Configure the XPS queue mapping on driver load") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
If we don't do that, then the poison value is left in the ->pprev
backlink.
This can cause crashes if we do a disconnect, followed by a connect().
Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Wen Xu <hotdog3645@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Currently there is a bug in zero range code which causes zero range
calls to only allocate block aligned portion of the range, while
ignoring the rest in some cases.
In some cases, namely if the end of the range is past i_size, we do
attempt to preallocate the last nonaligned block. However this might
cause kernel to BUG() in some carefully designed zero range requests
on setups where page size > block size.
Fix this problem by first preallocating the entire range, including
the nonaligned edges and converting the written extents to unwritten
in the next step. This approach will also give us the advantage of
having the range to be as linearly contiguous as possible.
Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
We accidently aliased EXT4_EX_NOCACHE and EXT4_GET_CONVERT_UNWRITTEN
falgs, which apparently was hiding a bug that was unmasked when this
flag aliasing issue was addressed (see the subsequent commit). The
reproduction case was:
... which would cause fsx to report corruption in the data file.
The fix we have is a bit of an overkill, but I'd much rather be
conservative for now, and we can optimize ZERO_RANGE_FL handling
later. The fact that we need to zap the extent_status cache for the
inode is unfortunate, but correctness is far more important than
performance.
Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Commit b8a8684502a0f introduced an accidental flag aliasing between
EXT4_EX_NOCACHE and EXT4_GET_BLOCKS_CONVERT_UNWRITTEN.
Fortunately, this didn't introduce any untorward side effects --- we
got lucky. Nevertheless, fix this and leave a warning to hopefully
avoid this from happening in the future.
Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The Fujitsu H730 does not work with crc_enabled = 0, even though the
crc_enabled bit in the firmware version indicated it would. When switching
this value to crc_enabled to 1, the touchpad works. This patch uses DMI to
detect H730.
Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The root cause is a race conditon -- cpufreq core and acpi-cpufreq driver
were initiated, but cpufreq_governor wasn't and _PPC changed notification
happened, __cpufreq_governor() was called within acpi_os_execute_deferred
kernel thread context.
To fix this panic issue, add pointer checking code in __cpufreq_governor()
before pointer policy->governor is to be dereferenced.
Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Since commit ee0778a30153
("tools/power: turbostat: make Makefile a bit more capable")
turbostat's Makefile is using
[...]
BUILD_OUTPUT := $(PWD)
[...]
which obviously causes trouble when building "turbostat" with
make -C /usr/src/linux/tools/power/x86/turbostat ARCH=x86 turbostat
because GNU make does not update nor guarantee that $PWD is set.
This patch changes the Makefile to use $CURDIR instead, which GNU make
guarantees to set and update (i.e. when using "make -C ...") and also
adds support for the O= option (see "make help" in your root of your
kernel source tree for more details).
Link: https://bugs.gentoo.org/show_bug.cgi?id=533918 Fixes: ee0778a30153 ("tools/power: turbostat: make Makefile a bit more capable") Signed-off-by: Thomas D. <whissi@whissi.de> Cc: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Using the indenting we can see the curly braces were obviously intended.
This is a static checker fix, but my guess is that we don't read enough
bytes, because we don't calculate "t_len" correctly.
Fixes: f1d82698029b ('memstick: use fully asynchronous request processing') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Commit 2473238eac95 ("ihex: add support for CS:IP/EIP records") removes
the "default:" statement in the switch block, making the "return
usage();" line dead code and ihex2fw silently ignoring unknown options.
Restore this statement.
This bug was found by building with HOSTCC=clang and adding
-Wunreachable-code-return to HOSTCFLAGS.
Fixes: 2473238eac95 ("ihex: add support for CS:IP/EIP records") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
On Wed, Apr 15, 2015 at 05:41:26PM +0200, Nicolas Dichtel wrote:
> Le 15/04/2015 15:57, Herbert Xu a écrit :
> >On Wed, Apr 15, 2015 at 06:22:29PM +0800, Herbert Xu wrote:
> [snip]
> >Subject: skbuff: Do not scrub skb mark within the same name space
> >
> >The commit ea23192e8e577dfc51e0f4fc5ca113af334edff9 ("tunnels:
> Maybe add a Fixes tag?
> Fixes: ea23192e8e57 ("tunnels: harmonize cleanup done on skb on rx path")
>
> >harmonize cleanup done on skb on rx path") broke anyone trying to
> >use netfilter marking across IPv4 tunnels. While most of the
> >fields that are cleared by skb_scrub_packet don't matter, the
> >netfilter mark must be preserved.
> >
> >This patch rearranges skb_scurb_packet to preserve the mark field.
> nit: s/scurb/scrub
>
> Else it's fine for me.
Sure.
PS I used the wrong email for James the first time around. So
let me repeat the question here. Should secmark be preserved
or cleared across tunnels within the same name space? In fact,
do our security models even support name spaces?
---8<---
The commit ea23192e8e577dfc51e0f4fc5ca113af334edff9 ("tunnels:
harmonize cleanup done on skb on rx path") broke anyone trying to
use netfilter marking across IPv4 tunnels. While most of the
fields that are cleared by skb_scrub_packet don't matter, the
netfilter mark must be preserved.
This patch rearranges skb_scrub_packet to preserve the mark field.
Fixes: ea23192e8e57 ("tunnels: harmonize cleanup done on skb on rx path") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
If CONFIG_ARCH_DMA_ADDR_T_64BIT enabled for x86 systems and physical
memory is more than 4GB, dma_map_page may return a valid memory
address which greater than 0xffffffff. As a result, the mlx5 device page
allocator RB tree will be initialized with valid addresses greater than
0xfffffff.
However, (addr & PAGE_MASK) set the high four bytes to zeros. So, it's
impossible for the function, free_4k, to release the pages whose
addresses greater than 4GB. Memory leaks. And mlx5_ib module can't
release the pages when user try to remove the module, as a result,
system hang.
[root@rdma05 root]# dmesg | grep addr | head
addr = 3fe384000
addr & PAGE_MASK = fe384000
[root@rdma05 root]# rmmod mlx5_ib <---- hang on
---------------------- cosnole log -----------------
mlx5_ib 0000:04:00.0: irq 138 for MSI/MSI-X
alloc irq_desc for 139 on node -1
alloc kstat_irqs on node -1
mlx5_ib 0000:04:00.0: irq 139 for MSI/MSI-X
0000:04:00.0:free_4k:221:(pid 1519): page not found
0000:04:00.0:free_4k:221:(pid 1519): page not found
0000:04:00.0:free_4k:221:(pid 1519): page not found
0000:04:00.0:free_4k:221:(pid 1519): page not found
---------------------- cosnole log -----------------
Fixes: bf0bf77f6519 ('mlx5: Support communicating arbitrary host page size to firmware') Signed-off-by: Honggang Li <honli@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The current code decreases from the mss size (which is the gso_size
from the kernel skb) the size of the packet headers.
It shouldn't do that because the mss that comes from the stack
(e.g IPoIB) includes only the tcp payload without the headers.
The result is indication to the HW that each packet that the HW sends
is smaller than what it could be, and too many packets will be sent
for big messages.
An easy way to demonstrate one more aspect of the problem is by
configuring the ipoib mtu to be less than 2*hlen (2*56) and then
run app sending big TCP messages. This will tell the HW to send packets
with giant (negative value which under unsigned arithmetics becomes
a huge positive one) length and the QP moves to SQE state.
Fixes: b832be1e4007 ('IB/mlx4: Add IPoIB LSO support') Reported-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Current -next fails to link an ARM allmodconfig because drivers that use
the core recovery functions can be built as modules but those functions
are not exported:
Fixes: 5f9296ba21b3c (i2c: Add bus recovery infrastructure) Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
This problem appears to have been introduced in 2.6.29 by commit 93197a36a9c1 "Rewrite sysfs processor cache info code".
This caused lscpu to error out on at least e500v2 devices, eg:
error: cannot open /sys/devices/system/cpu/cpu0/cache/index2/size: No such file or directory
Some embedded powerpc systems use cache-size in DTS for the unified L2
cache size, not d-cache-size, so we need to allow for both DTS names.
Added a new CACHE_TYPE_UNIFIED_D cache_type_info structure to handle
this.
Fixes: 93197a36a9c1 ("powerpc: Rewrite sysfs processor cache info code") Signed-off-by: Dave Olson <olson@cumulusnetworks.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
kvm_write_guest_cached() does not mark all written pages as dirty and
code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot
with cross page accesses. Fix all the easy way.
The check is '<= 1' to have the same result for 'len = 0' cache anywhere
in the page. (nr_pages_needed is 0 on page boundary.)
Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <20150408121648.GA3519@potion.brq.redhat.com> Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
The patch to add it_page_shift incorrectly changed the increment of
uaddr to use it_page_shift, rather then (1 << it_page_shift).
This broke booting on at least some Cell blades, as the iommu was
basically non-functional.
Fixes: 3a553170d35d ("powerpc/iommu: Add it_page_shift field to determine iommu page size") Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
When the kernel deleted a vti6 interface, this interface was not removed from
the tunnels list. Thus, when the ip6_vti module was removed, this old interface
was found and the kernel tried to delete it again. This was leading to a kernel
panic.
Fixes: 61220ab34948 ("vti6: Enable namespace changing") Signed-off-by: Yao Xiwei <xiwei.yao@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Looking over the implementation for jhash2 and comparing it to jhash_3words
I realized that the two hashes were in fact very different. Doing a bit of
digging led me to "The new jhash implementation" in which lookup2 was
supposed to have been replaced with lookup3.
In reviewing the patch I noticed that jhash2 had originally initialized a
and b to JHASH_GOLDENRATIO and c to initval, but after the patch a, b, and
c were initialized to initval + (length << 2) + JHASH_INITVAL. However the
changes in jhash_3words simply replaced the initialization of a and b with
JHASH_INITVAL.
This change corrects what I believe was an oversight so that a, b, and c in
jhash_3words all have the same value added consisting of initval + (length
<< 2) + JHASH_INITVAL so that jhash2 and jhash_3words will now produce the
same hash result given the same inputs.
Fixes: 60d509c823cca ("The new jhash implementation") Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Normally, when a CPU wants to clear a cache line to zero in the external
L2 cache, it would generate bus cycles to write each word as it would do
with any other data access.
However, a Cortex A9 connected to a L2C-310 has a specific feature where
the CPU can detect this operation, and signal that it wants to zero an
entire cache line. This feature, known as Full Line of Zeros (FLZ),
involves a non-standard AXI signalling mechanism which only the L2C-310
can properly interpret.
There are separate enable bits in both the L2C-310 and the Cortex A9 -
the L2C-310 needs to be enabled and have the FLZ enable bit set in the
auxiliary control register before the Cortex A9 has this feature
enabled.
Unfortunately, the suspend code was not respecting this - it's not
obvious from the code:
swsusp_arch_suspend()
cpu_suspend() /* saves the Cortex A9 auxiliary control register */
arch_save_image()
soft_restart() /* turns off FLZ in Cortex A9, and disables L2C */
cpu_resume() /* restores the Cortex A9 registers, inc auxcr */
At this point, we end up with the L2C disabled, but the Cortex A9 with
FLZ enabled - which means any memset() or zeroing of a full cache line
will fail to take effect.
A similar issue exists in the resume path, but it's slightly more
complex:
swsusp_arch_suspend()
cpu_suspend() /* saves the Cortex A9 auxiliary control register */
arch_save_image() /* image with A9 auxcr saved */
...
swsusp_arch_resume()
call_with_stack()
arch_restore_image() /* restores image with A9 auxcr saved above */
soft_restart() /* turns off FLZ in Cortex A9, and disables L2C */
cpu_resume() /* restores the Cortex A9 registers, inc auxcr */
Again, here we end up with the L2C disabled, but Cortex A9 FLZ enabled.
There's no need to turn off the L2C in either of these two paths; there
are benefits from not doing so - for example, the page copies will be
faster with the L2C enabled.
Hence, fix this by providing a variant of soft_restart() which can be
used without turning the L2 cache controller off, and use it in both
of these paths to keep the L2C enabled across the respective resume
transitions.
Fixes: 8ef418c7178f ("ARM: l2c: trial at enabling some Cortex-A9 optimisations") Reported-by: Sean Cross <xobs@kosagi.com> Tested-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
For cases where total length of an input SGs is not same as
length of the input data for encryption, omap-aes driver
crashes. This happens in the case when IPsec is trying to use
omap-aes driver.
To avoid this, we copy all the pages from the input SG list
into a contiguous buffer and prepare a single element SG list
for this buffer with length as the total bytes to crypt, which is
similar thing that is done in case of unaligned lengths.
Fixes: 6242332ff2f3 ("crypto: omap-aes - Add support for cases of unaligned lengths") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
If a provider advertizes a zero max_fast_reg_page_list_len, FRWR
depth detection loops forever. Instead of just failing the mount,
try other memory registration modes.
Fixes: 0fc6c4e7bb28 ("xprtrdma: mind the device's max fast . . .") Reported-by: Devesh Sharma <Devesh.Sharma@Emulex.Com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com> Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com> Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[ luis: backported to 3.16:
- devattr struct isn't a pointer ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
time_init invokes timer64_init (which is __init annotation)
since all of these are invoked at init time, lets maintain
consistency by ensuring time_init is marked appropriately
as well.
This fixes the following warning with CONFIG_DEBUG_SECTION_MISMATCH=y
WARNING: vmlinux.o(.text+0x3bfc): Section mismatch in reference from the function time_init() to the function .init.text:timer64_init()
The function time_init() references
the function __init timer64_init().
This is often because time_init lacks a __init
annotation or the annotation of timer64_init is wrong.
Fixes: 546a39546c64 ("C6X: time management") Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
projects / thirdparty / kernel / stable.git / log
