Rene Hollander [Sat, 27 May 2023 11:33:37 +0000 (13:33 +0200)]
networkd/dhcpserver: Save and expose the client hostname sent when requesting a DHCP lease.
DHCP clients often send their own hostname in option 12. It can be useful
to store it with the lease so it can be shown to a human to easily identify
which lease belongs to which device.
Frantisek Sumsal [Wed, 31 May 2023 13:40:33 +0000 (15:40 +0200)]
test: skip the test early if we're built without systemd-homed
We check for homed stuff in the test itself, but this is way too late,
since we already started a unit that Requires=systemd-homed.service
(testsuite-46.service). For now this doesn't matter, but with #27852
the offending transaction is dropped from the job queue, making the test
fail.
I thought the commit does not cause any severe regression. However,
drivers for network interfaces may be loaded later. So, we should wait
if no network interface is found.
units: pull in local-fs-pre.target from systemd-tmpfiles-setup-dev.service
local-fs-pre.target is a passive unit, which means that it is supposed to be
pulled in by everything that is ordered before it. We had
Before=local-fs-pre.target, so add Wants= too.
I don't expect this to change anything. Instead, just make things follow the
docs so it's easier to reason about the dependency set.
Daan De Meyer [Tue, 30 May 2023 12:48:43 +0000 (14:48 +0200)]
mkosi: Blacklist vmw_vmci to avoid issues with vsock in Github Actions
If this module is loaded, sending readiness notifications from the
VM will fail with "no route to host" so let's blacklist the module
to prevent that from happening.
Daan De Meyer [Tue, 30 May 2023 08:11:23 +0000 (10:11 +0200)]
repart: Add --architecture option
This option allows overriding the architecture that's used for the
architecture specific partition types. This is useful to allow
reusing the same repart configuration to produce the same image for
different architectures.
Daan De Meyer [Sun, 26 Mar 2023 16:20:41 +0000 (18:20 +0200)]
label: Introduce LabelOps to do pre/post labelling operations
By default, label_ops is initialized with a NULL pointer which translates
to noop labelling operations. In mac_selinux_init() and the new mac_smack_init(),
we initialize label_ops with a MAC specific LabelOps pointer.
We also introduce mac_init() to initialize any configured MACs and replace all
usages of mac_selinux_init() with mac_init().
All users of loopback_setup() ignore the return values (with the notable
exception of the test cases). Hence let's adjust the log messaging to
always log at LOG_WARNING level at most, and suffix messages with ",
ignoring", to make clear these failures are ignored.
find-esp: change "unprivileged_mode" parameter to be tristate
Previously, unprivileged mode for find_esp_and_warn() and
find_xbootldr_and_warn() could be enabled or disabled. With this change
it can also be set to negative in which case the functions will enable
it automatically if found to be executing without privileges.
This just moves te geteuid() check we often do for the param inside of
the functions.
At the same time internally in the functions we also pass around the
VerifyESPFlags field across the various functions instead of booleans.
Both changes are just refactoring. No changes in behaviour.
In b6033b706028a64e9affb79050ced1ad9a4f5b43 support was added to create
{/etc|/run}/credstore{|.encrypted} via tmpfiles.d with perms 0000. These
perms are so restrictive that not even root can access them unless it
has CAP_DAC_OVERRIDE capability. This is creates the dirs at boot time
1. creates both /etc/credstore *and* /etc/credstore.encrypted in both
places (the build system still won't create them in /run/, since
that's pointless since not shipped, and the runtime won't create the
dirs below /usr/lib/, since that's not generically writable anyway).
2. Both at runtime and at build time we'll create the dirs with mode
0700. This is easier for packaging tools to handle since they
generally react pretty negatively on dirs they can't enumerate.
Arian van Putten [Tue, 30 May 2023 17:12:36 +0000 (19:12 +0200)]
bootctl: Print version number of detected binaries
In 9b9f6aa41204c995b7a3b3e99c50e92b0a8b3dde (#27069)
we changed get_file_version to return 0 instead of 1 on success.
However we did not update the printing of the version number to
handle this change so we would never print the version number.
Frantisek Sumsal [Tue, 30 May 2023 10:40:19 +0000 (12:40 +0200)]
core,shared: add a couple of asserts
To appease the LTO overlords:
In file included from ../../../../src/basic/macro.h:446,
from ../../../../src/shared/blockdev-util.h:8,
from ../../../../src/shared/creds-util.c:11:
../../../../src/shared/creds-util.c: In function 'get_credential_host_secret':
../../../../src/shared/creds-util.c:379:52: error: '%s' directive argument is null [-Werror=format-overflow=]
379 | log_debug_errno(r, "Credential secret %s/%s appeared while we were creating it, rereading.",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../../../src/basic/log.h:214:86: note: in definition of macro 'log_full_errno_zerook'
214 | ? log_internal(_level, _e, PROJECT_FILE, __LINE__, __func__, __VA_ARGS__) \
| ^~~~~~~~~~~
../../../../src/basic/log.h:250:41: note: in expansion of macro 'log_full_errno'
250 | #define log_debug_errno(error, ...) log_full_errno(LOG_DEBUG, error, __VA_ARGS__)
| ^~~~~~~~~~~~~~
../../../../src/shared/creds-util.c:379:33: note: in expansion of macro 'log_debug_errno'
379 | log_debug_errno(r, "Credential secret %s/%s appeared while we were creating it, rereading.",
| ^~~~~~~~~~~~~~~
../../../../src/shared/creds-util.c:379:74: note: format string is defined here
379 | log_debug_errno(r, "Credential secret %s/%s appeared while we were creating it, rereading.",
| ^~
cc1: some warnings being treated as errors
../../../../src/core/transaction.c: In function 'transaction_verify_order_one':
../../../../src/core/transaction.c:338:38: error: '%s' directive argument is null [-Werror=format-overflow=]
338 | sprintf(ans + size, "%s%s", unit_log_field, *unit_id);
| ^~
cc1: some warnings being treated as errors
Daan De Meyer [Sat, 27 May 2023 10:21:19 +0000 (12:21 +0200)]
test-udev: Skip running in container
Containers generally don't have permission to mknod() which is
required by test-udev so let's skip the test as well if we detect
we're running in a container.
Daan De Meyer [Mon, 22 May 2023 21:17:49 +0000 (23:17 +0200)]
repart: Allow target directory excludes
Currently, ExcludeFiles= supports excluding directories on the host
from being copied. Let's extend this to also support preventing files
from being copied into specific directories in the partition by adding
a new option ExcludeFilesTarget=. An example where this is useful is
when setting up btrfs subvolumes in the top level that are intended to
be mounted into specific locations, so /usr would be stored in @usr,
/home in @home, .... To accomplish this, we need to copy /usr to @usr
and prevent any files from being copied into /usr in the partition,
which with this commit, we'd be able to do as follows:
shared/loop-util: use longer delay when waiting for loop device
The kernel may be syncing a file system or doing something else that requires
more time. So make the delay a bit longer, but provide some feedback and also
grow the delay exponentially (though with a long exponent). If the kernel is
doing something else, no need to repeat so often. With 38 attempts, we get a
total of slightly above 5000 ms.
I wrote this when I thought that the the delay is not long enough. It turned
out that we were blocking the file system on the loop device, so waiting longer
wasn't helpful. But I think it's nicer to do it this way anyway.
The man page is reference documentation, so we shouldn't write too much
duplicate things here, but we can make the text a bit more approachable. This
rewords and extends the documentation as requested and suggested in #24231 and
adds some hints for the user.
The text is reworded a bit too. In particular, it's "partitions" that are not
reordered, not "partition table slots". If we were reordering things, we'd move
the partitions between slots. The slots themselves are not moveable.
Richard Phibel [Mon, 29 May 2023 22:45:09 +0000 (00:45 +0200)]
Fix failing test
In test-execute, only the unit was started, not the slice. Because of
that the slice cgroup was pruned even if it was still needed. From what
I can tell, this is because, in the test, we don't have all the
mechanics that starts the slice for a service. To fix the issue the
slice is started manually.
Yu Watanabe [Mon, 29 May 2023 03:56:30 +0000 (12:56 +0900)]
network: do not request dynamic addressing protocols finished when at least one static address is configured
The setting IPv6AcceptRA= is defaults to yes, hence, even if a .network
file for an interface has static IP address configuration, it may takes
few seconds for the interface being configured state, as NDisc for the
interface needs to be finished. That makes wait-online.service
needlessly slow. Typically, such delay is not necessary for statically
configured networks.
Let's make the required condition slightly relaxed; if a .network file
has static IP address configurations, then let's make the matching
interface enter the 'configured' state soon after the static addresses
configured on the interface.
Note, this does not change the default for IPv6AcceptRA=, hence, NDisc
still runs on interfaces by default. So, addresses, routes, DNS servers,
and so on based on RA will be assigned on interfaces later.
Strictly speaking, this breaks backward compatibility, but the previous
behavior is not clearly documented. If a user requested both static
IPv4 address and IPv6 SLAAC address configured before an interface being
entered to the 'configured' state, then '--ipv6' for wait-online can be
used. So, the behavior change should not cause severe regression.
Dmitry V. Levin [Mon, 29 May 2023 08:00:00 +0000 (08:00 +0000)]
man: mention that udevadm verify also checks for udev rules style issues
Starting with commit acc1954a0394, udevadm verify also checks token
delimiters, which are not necessarily a matter of udev rules syntax,
but rather a question of style and readability. Mention that in the
documentation to avoid confusion.
Suggested-by: Martin Wilck <mwilck@suse.com>
Complements: acc1954a0394 ("udev-rules: check token delimiters")
There is really no reason to go out of our way to create the config files as
the unprivileged user. And in the logs, the runas calls are quite verbose,
distracting from the interesting stuff. Also add .defs/.imgs/.root to the
temporary paths to make them easier to distinguish in the logs.
KERNEL_APPEND="systemd.unit=multi-user.target" is not very useful, because the
machine will still shut down as soon as the tests succeeds or fails. But
INTERACTIVE_DEBUG=1 works great, so let's simplify the instructions and
recommend that.
Russell Harmon [Mon, 29 May 2023 01:51:36 +0000 (18:51 -0700)]
Support no-journal for dm-integrity devices.
As documented in integritysetup.8, dm-integrity devices support running
without a journal whatsoever. This change allows the
CRYPT_ACTIVATE_NO_JOURNAL flag (the same as is used with `integritysetup
--integrity-no-journal`) to be passed in during dmsetup by specifying
the `no-journal` option in integritytab.5.
Yu Watanabe [Tue, 30 May 2023 05:50:17 +0000 (14:50 +0900)]
network: rewrite dynamic addressing protocol checkers in link_check_ready()
Notable change is,
- UseAddress=no in [DHCPv6],
- Assign=no in [DHCPPrefixDelegation], and
- UseAutonomousPrefix=no in [IPv6AcceptRA]
are gracefully handled now.
Frantisek Sumsal [Mon, 29 May 2023 18:28:34 +0000 (20:28 +0200)]
home: move the assert back to the intended place
98d81cf974 moved the assertion at the beginning of home_dispatch_acquire(),
which is however before we even check for any ongoing operation, hence we
might hit it even in legitimate cases.
Let's move it back to after we check for any possibly ongoing operation, to
make it once again a safety check.
Follow-up to 98d81cf974.
Resolves: #22443 and #24036
projects / thirdparty / systemd.git / log
