Merge tag 'samsung-dt-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.18
1. Drop S3C2416 SoC from bindings, because it was removed from kernel
in 2023.
2. Add Ethernet attached via SROM controller (memory bus) on SMDK5250.
This wasn't tested, but code should work just like it is working on
Exynos5410-based boards.
* tag 'samsung-dt-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: smdk5250: add sromc node
ARM: dts: samsung: exynos5250: describe sromc bank memory map
ARM: dts: samsung: exynos5410: use multiple tuples for sromc ranges
dt-bindings: arm: samsung: Drop S3C2416
Merge tag 'samsung-dt64-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.18
1. Exynos850 e850 board: Enable Ethernet.
2. Exynos990: Enable watchdog and USB, add more clock controllers.
3. Exynos2200: Switch to 32-bit address space for blocks, because all
peripherals fit there. Add remaining serial engine (USI) nodes
(serial, I2C).
4. New Artpec ARTPEC-8 SoC with board. That's a design from Samsung,
sharing all basic blocks with other Samsung SoCs (busses, clock
controllers, pin controllers, PCIe, USB) and having media/video
related blocks from Axis.
Only basic support is added here: few clock controllers, pin
controller and UART.
5. Several cleanups.
* tag 'samsung-dt64-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos990: Enable PERIC0 and PERIC1 clock controllers
arm64: dts: axis: Add ARTPEC-8 Grizzly dts support
arm64: dts: exynos: axis: Add initial ARTPEC-8 SoC support
dt-bindings: arm: axis: Add ARTPEC-8 grizzly board
arm64: dts: exynos8895: Minor whitespace cleanup
dt-bindings: arm: Convert Axis board/soc bindings to json-schema
arm64: dts: exynos2200: Add default GIC address cells
arm64: dts: fsd: Add default GIC address cells
arm64: dts: google: gs101: Add default GIC address cells
arm64: dts: exynos5433: Add default GIC address cells
arm64: dts: exynos2200: define all usi nodes
arm64: dts: exynos2200: increase the size of all syscons
arm64: dts: exynos2200: use 32-bit address space for /soc
arm64: dts: exynos2200: fix typo in hsi2c23 bus pins label
arm64: dts: exynos990-r8s: Enable USB
arm64: dts: exynos990-c1s: Enable USB
arm64: dts: exynos990-x1s-common: Enable USB
arm64: dts: exynos990: Add USB nodes
arm64: dts: exynos990: Enable watchdog timer
arm64: dts: exynos: Add Ethernet node for E850-96 board
Merge tag 'socfpga_dts_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.18
- Add and enable gmac for Agilex5
* tag 'socfpga_dts_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: socfpga: agilex5: enable gmac2 on the Agilex5 dev kit
arm64: dts: Agilex5 Add gmac nodes to DTSI for Agilex5
Merge tag 'v6.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: FriendlyElec NanoPi Zero2, ArmSoM Sige1, Radxa ROCK 2A/2F,
HINLINK H66K / H68K .
Interesting new peripherals: I guess the most interesting one is likely
the NPU on RK3588. The rocket driver has been merged into both the DRM
tree as well as mainline Mesa.
Other stll interesting ones are DW-Displayport on RK3588, DSI on RK3576
(missing soc pwm-support to be useful on most boards), thermal support
and watchdog on RK3576.
The rest peripheral additions on a number of boards (Beelink A1,
Pine{phone,book}, rk3576-evb1-v10, Rock 5*, ...)
* tag 'v6.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX
arm64: dts: rockchip: Enable DisplayPort for rk3588s Cool Pi 4B
arm64: dts: rockchip: Add DP1 for rk3588
arm64: dts: rockchip: Add DP0 for rk3588
arm64: dts: rockchip: Add FriendlyElec NanoPi Zero2
dt-bindings: arm: rockchip: Add FriendlyElec NanoPi Zero2
arm64: dts: rockchip: Add ArmSoM Sige1
dt-bindings: arm: rockchip: Add ArmSoM Sige1
arm64: dts: rockchip: Add Radxa ROCK 2A/2F
dt-bindings: arm: rockchip: Add Radxa ROCK 2A/2F
dt-bindings: soc: rockchip: add missing clock reference for rk3576-dcphy syscon
arm64: dts: rockchip: add USB3 on Beelink A1
arm64: dts: rockchip: add SPDIF audio to Beelink A1
arm64: dts: rockchip: add IR receiver to rk3328-roc
arm64: dts: rockchip: Further describe the WiFi for the Pinephone Pro
arm64: dts: rockchip: Further describe the WiFi for the Pinebook Pro
arm64: dts: rockchip: Enable the NPU on NanoPi R6C/R6S
arm64: dts: rockchip: enable NPU on OPI5/5B
arm64: dts: rockchip: Add Bluetooth on rk3576-evb1-v10
arm64: dts: rockchip: Add WiFi on rk3576-evb1-v10
...
Merge tag 'thead-dt-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt
T-HEAD Devicetrees for v6.18
Add a device tree node for the IMG BXM-4-64 GPU present in the T-HEAD
TH1520 SoC used by the Lichee Pi 4A board. This node enables support for
the GPU using the drm/imagination driver.
By adding this node, the kernel can recognize and initialize the GPU,
providing graphics acceleration capabilities on the Lichee Pi 4A and
other boards based on the TH1520 SoC. The display controller and HDMI
output are still a work in progress.
Also included is a MAINTAINERS patch that adds an entry for the T-Head
SoC patchwork.
Henrik Grimler [Mon, 8 Sep 2025 07:26:56 +0000 (09:26 +0200)]
ARM: dts: samsung: exynos5250: describe sromc bank memory map
According to public user manual for Exynos 5250 [1], the SROM
controller has 4 banks, at same addresses as for example Exynos
5410. Describe the bank memory map of the SoC.
Henrik Grimler [Mon, 8 Sep 2025 07:26:55 +0000 (09:26 +0200)]
ARM: dts: samsung: exynos5410: use multiple tuples for sromc ranges
Preferred style is to have comma separated tuples when multiple
addresses and sizes are defined in ranges. Therefore, change the
format to clarify the node.
Signed-off-by: Henrik Grimler <henrik@grimler.se> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
tmpv7708.dtsi:503.4-507.28: Warning (interrupt_map): /soc/pcie@28400000:interrupt-map:
Missing property '#address-cells' in node /soc/interrupt-controller@24001000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
alpine-v3.dtsi:342.4-349.33: Warning (interrupt_map): /soc/pcie@fbd00000:interrupt-map:
Missing property '#address-cells' in node /soc/interrupt-controller@f0800000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
alpine-v2.dtsi:138.4-139.33: Warning (interrupt_map): /soc/pci@fbc00000:interrupt-map:
Missing property '#address-cells' in node /soc/interrupt-controller@f0200000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
apm-storm.dtsi:636.4-639.42: Warning (interrupt_map): /soc/pcie@1f2b0000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@78010000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Document the Axis ARTPEC-8 SoC binding and the grizzly board
which uses ARTPEC-8 SoC.
Signed-off-by: SungMin Park <smn1196@coasia.com> Signed-off-by: SeonGu Kang <ksk4725@coasia.com> Signed-off-by: Ravi Patel <ravi.patel@samsung.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250901051926.59970-4-ravi.patel@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung S3C24xx family of SoCs was removed from the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
Andy Yan [Fri, 22 Aug 2025 06:39:54 +0000 (14:39 +0800)]
arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX
The HDMI0(Port next to Headphone Jack) is driven by DP1 on rk3588
via RA620(a dp2hdmi converter).
Add related dt nodes to enable it.
Note: ROCKCHIP_VOP2_EP_DP1 is defined as 11 in dt-binding header,
but it will trigger a dtc warning like "graph node unit address
error, expected "b"" if we use it directly after endpoint, so we
use "b" instead here.
Andy Yan [Fri, 22 Aug 2025 06:39:53 +0000 (14:39 +0800)]
arm64: dts: rockchip: Enable DisplayPort for rk3588s Cool Pi 4B
Enable the Mini DisplayPort on this board.
Note that ROCKCHIP_VOP2_EP_DP0 is defined as 10 in dt-binding header,
but it will trigger a dtc warning like "graph node unit address error,
expected "a"" if we use it directly after endpoint, so we use "a"
instead here.
Jonas Karlman [Thu, 17 Jul 2025 10:37:04 +0000 (10:37 +0000)]
arm64: dts: rockchip: Add Radxa ROCK 2A/2F
The ROCK 2A and ROCK 2F is a high-performance single board computer
developed by Radxa, based on the Rockchip RK3528A SoC.
Add initial device tree for the Radxa ROCK 2A and ROCK 2F boards.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Link: https://lore.kernel.org/r/20250717103720.2853031-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Merge tag 'sti-dt-for-v6.18-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt
STi dt fixes:
- Drop STiH407/10-B2120 DT boards and bindings.
- Remove remaining STiH415/6 reference from STi machine.
- Fix phy-names value for stih407-family.dtsi.
* tag 'sti-dt-for-v6.18-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: sti: drop B2120 board support
ARM: sti: removal of stih415/stih416 related entries
dt-bindings: arm: sti: drop B2120 board support
ARM: dts: sti: rename SATA phy-names
Merge tag 'renesas-dts-for-v6.18-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.18
- Add initial support for the RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs and their evaluation boards,
- Add SPI support for the RZ/V2H SoC,
- Add DMAC and I3C support for the RZ/G3E SoC,
- Add I3C support for the RZ/G3S SoCs,
- Miscellaneous fixes and improvements.
Merge tag 'ux500-dts-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt
Ux500 DTS changes for v6.18
- Fix a GPIO hog name.
- Move custom wakeup GPIO to a proper GPIO IRQ
line rising edge wakeup.
* tag 'ux500-dts-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ste-ux500-samsung: dts bluetooth wakeup interrupt
ARM: dts: st: ste-nomadik: Align GPIO hog name with bindings
Merge tag 'nuvoton-arm-6.18-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
Early Nuvoton ARM devicetree updates for 6.18
So far we have just the one fix from Krzysztof that switches some nodes to use
generic names, as recommended by the spec.
* tag 'nuvoton-arm-6.18-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: nuvoton: Use generic "ethernet" as node name
Merge tag 'aspeed-6.18-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
Early ASPEED devicetree updates for 6.18
Notable changes:
- Meta's Wedge400 and Fuji boards have had parallel devicetrees added for a
transition to a new static flash layout. The original layout is deprecated and
I anticipate removing related devicetrees in future releases.
New platforms:
- Darwin (Meta)
Darwin is Meta's rack switch platform with an AST2600 BMC integrated for
health monitoring purpose.
Updates and fixes:
- GB200NVL (Nvidia): Networking, I2C, regulators, GPIOs
- Wedge400, Fuji (Meta): Fix warnings from devicetree bindings
- Use fixed-layout for NVMEM on Asrock platforms
- Various: minor fixes for warnings from FSI devicetree bindings
Merge tag 'apple-soc-dt-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/dt
Apple SoC device tree changes for v6.18, part 1
- Added SMC nodes for M1 and M2 including the PMU GPIO controller and
reboot sub-nodes. This now allows to reboot these systems and is
required to later enable the power GPIO line for the WiFi board.
- Added i2c nodes for A7 - A11 SoCs
Documentation/process: maintainer-soc: Use "DTS" instead of "devicetree"
Devicetree is a data structure and it is a bit generic term, because
some treat Devicetree bindings as Devicetree. What the SoC maintainers
profile is mentioning in ABI stability are the Devicetree sources, so
DTS files. It is also more common during reviews to refer to these as
per "DTS" instead "devicetree".
Clarify that by using "DTS" name in few more places.
Linus Torvalds [Sun, 31 Aug 2025 16:20:17 +0000 (09:20 -0700)]
Merge tag 'x86_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Convert the SSB mitigation to the attack vector controls which got
forgotten at the time
- Prevent the CPUID topology hierarchy detection on AMD from
overwriting the correct initial APIC ID
- Fix the case of a machine shipping without microcode in the BIOS, in
the AMD microcode loader
- Correct the Pentium 4 model range which has a constant TSC
* tag 'x86_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add attack vector controls for SSB
x86/cpu/topology: Use initial APIC ID from XTOPOLOGY leaf on AMD/HYGON
x86/microcode/AMD: Handle the case of no BIOS microcode
x86/cpu/intel: Fix the constant_tsc model check for Pentium 4
Linus Torvalds [Sun, 31 Aug 2025 16:13:00 +0000 (09:13 -0700)]
Merge tag 'sched_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a stall on the CPU offline path due to mis-counting a deadline
server task twice as part of the runqueue's running tasks count
- Fix a realtime tasks starvation case where failure to enqueue a timer
whose expiration time is already in the past would cause repeated
attempts to re-enqueue a deadline server task which leads to starving
the former, realtime one
- Prevent a delayed deadline server task stop from breaking the
per-runqueue bandwidth tracking
- Have a function checking whether the deadline server task has
stopped, return the correct value
* tag 'sched_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Don't count nr_running for dl_server proxy tasks
sched/deadline: Fix RT task potential starvation when expiry time passed
sched/deadline: Always stop dl-server before changing parameters
sched/deadline: Fix dl_server_stopped()
Linus Torvalds [Sun, 31 Aug 2025 16:07:37 +0000 (09:07 -0700)]
Merge tag 'irq_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Remove unnecessary and noisy WARN_ONs in gic-v5's init path
- Avoid a kmemleak false positive for the gic-v5's L2 IST table entries
- Fix a retval check in mvebu-gicp's probe function
- Fix a wrong conversion to guards in atmel-aic[5] irqchip
* tag 'irq_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v5: Remove undue WARN_ON()s in the IRS affinity parsing
irqchip/gic-v5: Fix kmemleak L2 IST table entries false positives
irqchip/mvebu-gicp: Fix an IS_ERR() vs NULL check in probe()
irqchip/atmel-aic[5]: Fix incorrect lock guard conversion
Linus Torvalds [Sun, 31 Aug 2025 15:56:45 +0000 (08:56 -0700)]
Merge tag 'hardening-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- ARM: stacktrace: include asm/sections.h in asm/stacktrace.h (Arnd
Bergmann)
- ubsan: Fix incorrect hand-side used in handle (Junhui Pei)
- hardening: Require clang 20.1.0 for __counted_by (Nathan Chancellor)
* tag 'hardening-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
hardening: Require clang 20.1.0 for __counted_by
ARM: stacktrace: include asm/sections.h in asm/stacktrace.h
ubsan: Fix incorrect hand-side used in handle
Linus Torvalds [Sun, 31 Aug 2025 15:49:55 +0000 (08:49 -0700)]
Merge tag 'gpio-fixes-for-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an off-by-one bug in interrupt handling in gpio-timberdale
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change Altera-PIO driver maintainer
gpio: timberdale: fix off-by-one in IRQ type boundary check
Ravi Patel [Mon, 25 Aug 2025 11:44:32 +0000 (17:14 +0530)]
dt-bindings: arm: Convert Axis board/soc bindings to json-schema
Convert Axis SoC bindings to DT schema format using json-schema.
Existing bindings supports ARTPEC-6 SoC and board.
Signed-off-by: SungMin Park <smn1196@coasia.com> Signed-off-by: SeonGu Kang <ksk4725@coasia.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Ravi Patel <ravi.patel@samsung.com> Link: https://lore.kernel.org/r/20250825114436.46882-7-ravi.patel@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add missing address-cells 0 to the PCI interrupt node to silence W=1
warning:
uniphier-pxs3.dtsi:915.4-918.29: Warning (interrupt_map): /soc@0/pcie@66000000:interrupt-map:
Missing property '#address-cells' in node /soc@0/pcie@66000000/legacy-interrupt-controller, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Add missing address-cells 0 to the PCI interrupt node to silence W=1
warning:
uniphier-ld20.dtsi:941.4-944.29: Warning (interrupt_map): /soc@0/pcie@66000000:interrupt-map:
Missing property '#address-cells' in node /soc@0/pcie@66000000/legacy-interrupt-controller, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Matthew Gerlach [Mon, 18 Aug 2025 16:39:33 +0000 (09:39 -0700)]
arm64: dts: socfpga: agilex5: enable gmac2 on the Agilex5 dev kit
Enable gmac2 on the Agilex5 SOCFGPA Development Kit. The MAC is connected
to a RGMII PHY on a daughter card. There are no RGMII clock delays
implemented the on PCB.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Mun Yew Tham [Mon, 18 Aug 2025 16:39:32 +0000 (09:39 -0700)]
arm64: dts: Agilex5 Add gmac nodes to DTSI for Agilex5
Add the base device tree nodes for gmac0, gmac1, and gmac2 to the DTSI
for the Agilex5 SOCFPGA. Agilex5 has three Ethernet controllers based on
Synopsys DWC XGMAC IP version 2.10.
Signed-off-by: Mun Yew Tham <mun.yew.tham@altera.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Linus Torvalds [Sat, 30 Aug 2025 17:43:53 +0000 (10:43 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- CFI failure due to kpti_ng_pgd_alloc() signature mismatch
- Underallocation bug in the SVE ptrace kselftest
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: Don't open code SVE_PT_SIZE() in fp-ptrace
arm64: mm: Fix CFI failure due to kpti_ng_pgd_alloc function signature
Peter Robinson [Fri, 29 Aug 2025 11:38:24 +0000 (12:38 +0100)]
arm64: dts: rockchip: Further describe the WiFi for the Pinephone Pro
Update the wake-up pin and associated interupt details for the
Pinephone Pro WiFi module. Details obtained from the published
PinephonePro-Schematic-V1.0-20211127.pdf page 19.
Mark Brown [Tue, 12 Aug 2025 14:49:27 +0000 (15:49 +0100)]
kselftest/arm64: Don't open code SVE_PT_SIZE() in fp-ptrace
In fp-trace when allocating a buffer to write SVE register data we open
code the addition of the header size to the VL depeendent register data
size, which lead to an underallocation bug when we cut'n'pasted the code
for FPSIMD format writes. Use the SVE_PT_SIZE() macro that the kernel
UAPI provides for this.
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
exynos5433-tm2-common.dtsi:1000.2-41: Warning (interrupt_map): /soc@0/pcie@15700000:interrupt-map:
Missing property '#address-cells' in node /soc@0/interrupt-controller@11001000, using 0 as fallbac
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0).
Ivaylo Ivanov [Fri, 15 Aug 2025 07:05:00 +0000 (10:05 +0300)]
arm64: dts: exynos2200: define all usi nodes
Universal Serial Interface (USI) supports three types of serial
interfaces - uart, i2c and spi. Each protocol can work independently
and configured using external configuration inputs.
As each USI instance has access to 4 pins, there are multiple possible
configurations:
- the first 2 and the last 2 pins can be i2c (sda/scl) or uart (rx/tx)
- the 4 pins can be used for 4 pin uart or spi
For each group of 4 pins, there is one usi instance that can access all
4 pins, and a second usi instance that can be used to set the last 2
pins in i2c mode. Such configuration can be achieved by setting the
mode property of usiX and usiX_i2c nodes correctly - if usiX is set
to take up 2 pins, then usiX_i2c can be set to take the other 2.
If usiX is set for 4 pins, then usiX_i2c should be left disabled.
Define all the USI nodes from peric0 (usi4), peric1 (usi7-10), peric2
(usi0-6, usi11) and cmgp (usi0-6_cmgp, 2 pin usi7_cmgp) blocks, as well
as their respective uart and i2c subnodes. Suffix labels for blocks
in CMGP instances with _cmgpX, and follow the naming conventions from
the vendor kernel to avoid confusion.
Ivaylo Ivanov [Fri, 15 Aug 2025 07:04:59 +0000 (10:04 +0300)]
arm64: dts: exynos2200: increase the size of all syscons
As IP cores are aligned by 0x10000, increase the size of all system
register instances to the maximum (0x10000) to allow using accessing
registers over the currently set limit.
Suggested-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20250815070500.3275491-4-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Linus Torvalds [Fri, 29 Aug 2025 20:54:26 +0000 (13:54 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly handle 'invariant' system registers for protected VMs
- Improved handling of VNCR data aborts, including external aborts
- Fixes for handling of FEAT_RAS for NV guests, providing a sane
fault context during SEA injection and preventing the use of
RASv1p1 fault injection hardware
- Ensure that page table destruction when a VM is destroyed gives an
opportunity to reschedule
- Large fix to KVM's infrastructure for managing guest context loaded
on the CPU, addressing issues where the output of AT emulation
doesn't get reflected to the guest
- Fix AT S12 emulation to actually perform stage-2 translation when
necessary
- Avoid attempting vLPI irqbypass when GICv4 has been explicitly
disabled for a VM
- Minor KVM + selftest fixes
RISC-V:
- Fix pte settings within kvm_riscv_gstage_ioremap()
- Fix comments in kvm_riscv_check_vcpu_requests()
- Fix stack overrun when setting vlenb via ONE_REG
x86:
- Use array_index_nospec() to sanitize the target vCPU ID when
handling PV IPIs and yields as the ID is guest-controlled.
- Drop a superfluous cpumask_empty() check when reclaiming SEV
memory, as the common case, by far, is that at least one CPU will
have entered the VM, and wbnoinvd_on_cpus_mask() will naturally
handle the rare case where the set of have_run_cpus is empty.
Selftests (not KVM):
- Rename the is_signed_type() macro in kselftest_harness.h to
is_signed_var() to fix a collision with linux/overflow.h. The
collision generates compiler warnings due to the two macros having
different meaning"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits)
KVM: arm64: nv: Fix ATS12 handling of single-stage translation
KVM: arm64: Remove __vcpu_{read,write}_sys_reg_{from,to}_cpu()
KVM: arm64: Fix vcpu_{read,write}_sys_reg() accessors
KVM: arm64: Simplify sysreg access on exception delivery
KVM: arm64: Check for SYSREGS_ON_CPU before accessing the 32bit state
RISC-V: KVM: fix stack overrun when loading vlenb
RISC-V: KVM: Correct kvm_riscv_check_vcpu_requests() comment
RISC-V: KVM: Fix pte settings within kvm_riscv_gstage_ioremap()
KVM: arm64: selftests: Sync ID_AA64MMFR3_EL1 in set_id_regs
KVM: arm64: Get rid of ARM64_FEATURE_MASK()
KVM: arm64: Make ID_AA64PFR1_EL1.RAS_frac writable
KVM: arm64: Make ID_AA64PFR0_EL1.RAS writable
KVM: arm64: Ignore HCR_EL2.FIEN set by L1 guest's EL2
KVM: arm64: Handle RASv1p1 registers
arm64: Add capability denoting FEAT_RASv1p1
KVM: arm64: Reschedule as needed when destroying the stage-2 page-tables
KVM: arm64: Split kvm_pgtable_stage2_destroy()
selftests: harness: Rename is_signed_type() to avoid collision with overflow.h
KVM: SEV: don't check have_run_cpus in sev_writeback_caches()
KVM: arm64: Correctly populate FAR_EL2 on nested SEA injection
...
After an innocuous change in -next that modified a structure that
contains __counted_by, clang-19 start crashing when building certain
files in drivers/gpu/drm/xe. When assertions are enabled, the more
descriptive failure is:
clang: clang/lib/AST/RecordLayoutBuilder.cpp:3335: const ASTRecordLayout &clang::ASTContext::getASTRecordLayout(const RecordDecl *) const: Assertion `D && "Cannot get layout of forward declarations!"' failed.
According to a reverse bisect, a tangential change to the LLVM IR
generation phase of clang during the LLVM 20 development cycle [1]
resolves this problem. Bump the version of clang that enables
CONFIG_CC_HAS_COUNTED_BY to 20.1.0 to ensure that this issue cannot be
hit.
Paolo Bonzini [Fri, 29 Aug 2025 16:57:31 +0000 (12:57 -0400)]
Merge tag 'kvmarm-fixes-6.17-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, take #2
- Correctly handle 'invariant' system registers for protected VMs
- Improved handling of VNCR data aborts, including external aborts
- Fixes for handling of FEAT_RAS for NV guests, providing a sane
fault context during SEA injection and preventing the use of
RASv1p1 fault injection hardware
- Ensure that page table destruction when a VM is destroyed gives an
opportunity to reschedule
- Large fix to KVM's infrastructure for managing guest context loaded
on the CPU, addressing issues where the output of AT emulation
doesn't get reflected to the guest
- Fix AT S12 emulation to actually perform stage-2 translation when
necessary
- Avoid attempting vLPI irqbypass when GICv4 has been explicitly
disabled for a VM
Paolo Bonzini [Fri, 29 Aug 2025 16:57:18 +0000 (12:57 -0400)]
Merge tag 'kvm-riscv-fixes-6.17-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 6.17, take #1
- Fix pte settings within kvm_riscv_gstage_ioremap()
- Fix comments in kvm_riscv_check_vcpu_requests()
- Fix stack overrun when setting vlenb via ONE_REG
Linus Torvalds [Fri, 29 Aug 2025 16:15:46 +0000 (09:15 -0700)]
Merge tag 'efi-fixes-for-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Assorted fixes for the OP-TEE based pseudo-EFI variable store
- Fix for an OOB access when looking up the same non-existing efivarfs
entry multiple times in parallel
* tag 'efi-fixes-for-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare
efi: stmm: Drop unneeded null pointer check
efi: stmm: Drop unused EFI error from setup_mm_hdr arguments
efi: stmm: Do not return EFI_OUT_OF_RESOURCES on internal errors
efi: stmm: Fix incorrect buffer allocation method
Linus Torvalds [Fri, 29 Aug 2025 15:09:34 +0000 (08:09 -0700)]
Merge tag 'xfs-fixes-6.17-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"The highlight I'd like to point here is related to the XFS_RT
Kconfig, which has been updated to be enabled by default now if
CONFIG_BLK_DEV_ZONED is enabled.
This also contains a few fixes for zoned devices support in XFS,
specially related to swapon requests in inodes belonging to the zoned
FS.
A null-ptr dereference fix in the xattr data, due to a mishandling of
medium errors generated by block devices is also included"
* tag 'xfs-fixes-6.17-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: do not propagate ENODATA disk errors into xattr code
xfs: reject swapon for inodes on a zoned file system earlier
xfs: kick off inodegc when failing to reserve zoned blocks
xfs: remove xfs_last_used_zone
xfs: Default XFS_RT to Y if CONFIG_BLK_DEV_ZONED is enabled
Linus Torvalds [Fri, 29 Aug 2025 14:37:21 +0000 (07:37 -0700)]
Merge tag 'regulator-fix-v6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple fix for the pm8008 driver for poor error handling,
switching to use a helper which does the right thing in the
affected case"
* tag 'regulator-fix-v6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pm8008: fix probe failure due to negative voltage selector
Linus Torvalds [Fri, 29 Aug 2025 14:29:17 +0000 (07:29 -0700)]
Merge tag 'ata-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix the type of return values to be signed in the ahci_xgen driver
(Qianfeng)
- Add the mask_port_ext module parameter to the ahci driver.
This is to allow a user to ignore ports that are advertized as
external (hotplug capable) in favor of lower link power management
policies instead of the default max_performance for these ports.
This is useful to allow e.g. laptops to go into low power states when
hooked up to docking station with sata slots, connected with an
external port for hotplug (me)
* tag 'ata-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci_xgene: Use int type for 'rc' to store error codes
ata: ahci: Allow ignoring the external/hotplug capability of ports
Linus Walleij [Fri, 22 Aug 2025 17:56:16 +0000 (19:56 +0200)]
ARM: dts: Add ixp4xx Actiontec MI424WR device trees
The Actiontex MI424WR is a pretty widespread home router, made
in many different revisions.
Revisions A, C and D are based on IXP42x. We add a device tree
for the A/C variant and one for the D variant as these differ in
the location of the WAN PHY on the MDIO bus, and the ethernet
interfaces for the WAN PHY and the DSA switch are switched around.
Linus Torvalds [Fri, 29 Aug 2025 02:56:32 +0000 (19:56 -0700)]
Merge tag 'drm-fixes-2025-08-29' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, feels a bit big.
The major piece is msm fixes, then the usual amdgpu/xe along with some
mediatek and nouveau fixes and a tegra revert.
gpuvm:
- fix some typos
xe:
- Fix user-fence race issue
- Couple xe_vm fixes
- Don't trigger rebind on initial dma-buf validation
- Fix a build issue related to basename() posix vs gnu discrepancy
nouveau:
- fix linear modifier
- remove some dead code
msm:
- Core/GPU:
- fix comment doc warning in gpuvm
- fix build with KMS disabled
- fix pgtable setup/teardown race
- global fault counter fix
- various error path fixes
- GPU devcoredump snapshot fixes
- handle in-place VM_BIND remaps to solve turnip vm update race
- skip re-emitting IBs for unusable VMs
- Don't use %pK through printk
- moved display snapshot init earlier, fixing a crash
- DPU:
- Fixed crash in virtual plane checking code
- Fixed mode comparison in virtual plane checking code
- DSI:
- Adjusted width of resulution-related registers
- Fixed locking issue on 14nm PLLs
- UBWC (per Bjorn's ack)
- Added UBWC configuration for several missing platforms (fixing
regression)
mediatek:
- Add error handling for old state CRTC in atomic_disable
- Fix DSI host and panel bridge pre-enable order
- Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
- mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
tegra:
- revert dma-buf change"
* tag 'drm-fixes-2025-08-29' of https://gitlab.freedesktop.org/drm/kernel: (56 commits)
drm/mediatek: mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
drm/amdgpu/userq: fix error handling of invalid doorbell
drm/amdgpu: update firmware version checks for user queue support
drm/amd/amdgpu: disable hwmon power1_cap* for gfx 11.0.3 on vf mode
Revert "drm/amdgpu: fix incorrect vm flags to map bo"
drm/amdgpu/gfx12: set MQD as appriopriate for queue types
drm/amdgpu/gfx11: set MQD as appriopriate for queue types
drm/xe: switch to local xbasename() helper
drm/xe: Don't trigger rebind on initial dma-buf validation
drm/xe/vm: Clear the scratch_pt pointer on error
drm/xe/vm: Don't pin the vm_resv during validation
drm/xe/xe_sync: avoid race during ufence signaling
Revert "drm/tegra: Use dma_buf from GEM object instance"
soc: qcom: use no-UBWC config for MSM8956/76
soc: qcom: add configuration for MSM8929
soc: qcom: ubwc: add more missing platforms
soc: qcom: ubwc: use no-uwbc config for MSM8917
drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset
dt-bindings: display/msm: qcom,mdp5: drop lut clock
drm/gpuvm: fix various typos in .c and .h gpuvm file
...
Linus Torvalds [Fri, 29 Aug 2025 01:51:28 +0000 (18:51 -0700)]
Merge tag 'block-6.17-20250828' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix a lockdep spotted issue on recursive locking for zoned writes, in
case of errors
- Update bcache MAINTAINERS entry address for Coly
- Fix for a ublk release issue, with selftests
- Fix for a regression introduced in this cycle, where it assumed
q->rq_qos was always set if the bio flag indicated that
- Fix for a regression introduced in this cycle, where loop retrieving
block device sizes got broken
* tag 'block-6.17-20250828' of git://git.kernel.dk/linux:
bcache: change maintainer's email address
ublk selftests: add --no_ublk_fixed_fd for not using registered ublk char device
ublk: avoid ublk_io_release() called after ublk char dev is closed
block: validate QoS before calling __rq_qos_done_bio()
blk-zoned: Fix a lockdep complaint about recursive locking
loop: fix zero sized loop for block special file
Linus Torvalds [Fri, 29 Aug 2025 01:41:53 +0000 (18:41 -0700)]
Merge tag 'io_uring-6.17-20250828' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Use the proper type for min_t() in getting the min of the leftover
bytes and the buffer length.
- As good practice, use READ_ONCE() consistently for reading ring
provided buffer lengths. Additionally, stop looping for incremental
commits if a zero sized buffer is hit, as no further progress can be
made at that point.
* tag 'io_uring-6.17-20250828' of git://git.kernel.dk/linux:
io_uring/kbuf: always use READ_ONCE() to read ring provided buffer lengths
io_uring/kbuf: fix signedness in this_len calculation
Linus Torvalds [Fri, 29 Aug 2025 00:35:51 +0000 (17:35 -0700)]
Merge tag 'net-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - regressions:
- ipv4: fix regression in local-broadcast routes
- vsock: fix error-handling regression introduced in v6.17-rc1
Previous releases - regressions:
- bluetooth:
- mark connection as closed during suspend disconnect
- fix set_local_name race condition
- eth:
- ice: fix NULL pointer dereference on reset
- mlx5: fix memory leak in hws_pool_buddy_init error path
- bnxt_en: fix stats context reservation logic
- hv: fix loss of receive events from host during channel open
Previous releases - always broken:
- page_pool: fix incorrect mp_ops error handling
- sctp: initialize more fields in sctp_v6_from_sk()
- eth:
- octeontx2-vf: fix max packet length errors
- idpf: fix Tx flow scheduling to avoid Tx timeouts
- bnxt_en: fix memory corruption during ifdown
- ice: fix incorrect counter for buffer allocation failures
- mlx5: fix lockdep assertion on sync reset unload event
- fbnic: fixup rtnl_lock and devl_lock handling
- xgmac: do not enable RX FIFO overflow interrupts
- phy: mscc: fix when PTP clock is register and unregister
Misc:
- add Telit Cinterion LE910C4-WWX new compositions"
* tag 'net-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
net: ipv4: fix regression in local-broadcast routes
net: macb: Disable clocks once
fbnic: Move phylink resume out of service_task and into open/close
fbnic: Fixup rtnl_lock and devl_lock handling related to mailbox code
net: rose: fix a typo in rose_clear_routes()
l2tp: do not use sock_hold() in pppol2tp_session_get_sock()
sctp: initialize more fields in sctp_v6_from_sk()
MAINTAINERS: rmnet: Update email addresses
net: rose: include node references in rose_neigh refcount
net: rose: convert 'use' field to refcount_t
net: rose: split remove and free operations in rose_remove_neigh()
net: hv_netvsc: fix loss of early receive events from host during channel open.
net: stmmac: Set CIC bit only for TX queues with COE
net: stmmac: xgmac: Correct supported speed modes
net: stmmac: xgmac: Do not enable RX FIFO Overflow interrupts
net/mlx5e: Set local Xoff after FW update
net/mlx5e: Update and set Xon/Xoff upon port speed set
net/mlx5e: Update and set Xon/Xoff upon MTU set
net/mlx5: Prevent flow steering mode changes in switchdev mode
net/mlx5: Nack sync reset when SFs are present
...
1. Add error handling for old state CRTC in atomic_disable
2. Fix DSI host and panel bridge pre-enable order
3. Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
4. mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
Linus Torvalds [Thu, 28 Aug 2025 23:34:32 +0000 (16:34 -0700)]
Merge tag 'pm-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Add missing locking annotations to two recently introduced
list_for_each_entry_rcu() loops in the core device suspend/resume
code (Johannes Berg)"
* tag 'pm-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: annotate RCU list iterations
drm/mediatek: mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
In mtk_hdmi driver, a recent change replaced custom register access
function calls by regmap ones, but two replacements by regmap_update_bits
were done incorrectly, because original offset and mask parameters were
inverted, so fix them.
Linus Torvalds [Thu, 28 Aug 2025 23:04:14 +0000 (16:04 -0700)]
Merge tag 'dma-mapping-6.17-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- another small fix for arm64 systems with memory encryption (Shanker
Donthineni)
- fix for arm32 systems with non-standard CMA configuration (Oreoluwa
Babatunde)
* tag 'dma-mapping-6.17-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/pool: Ensure DMA_DIRECT_REMAP allocations are decrypted
of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()
Linus Torvalds [Thu, 28 Aug 2025 22:46:06 +0000 (15:46 -0700)]
Merge tag 'fixes-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
- printk cleanups in memblock and numa_memblks
- update kernel-doc for MEMBLOCK_RSRV_NOINIT to be more accurate and
detailed
* tag 'fixes-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix kernel-doc for MEMBLOCK_RSRV_NOINIT
mm: numa,memblock: Use SZ_1M macro to denote bytes to MB conversion
mm/numa_memblks: Use pr_debug instead of printk(KERN_DEBUG)
Dave Airlie [Thu, 28 Aug 2025 22:44:10 +0000 (08:44 +1000)]
Merge tag 'drm-misc-fixes-2025-08-28' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Several nouveau fixes to remove unused code, fix an error path and be
less restrictive with the formats it accepts. A fix for amdgpu to pin
vmapped dma-buf, and a revert for tegra for a regression in the dma-buf
/ GEM code.
Linus Torvalds [Thu, 28 Aug 2025 22:39:06 +0000 (15:39 -0700)]
Merge tag 'powerpc-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Merge two CONFIG_POWERPC64_CPU entries in Kconfig.cputype
- Replace extra-y to always-y in Makefile
- Cleanup to use dev_fwnode helper
- Fix misleading comment in kvmppc_prepare_to_enter()
- misc cleanup and fixes
Thanks to Amit Machhiwal, Andrew Donnellan, Christophe Leroy, Gautam
Menghani, Jiri Slaby (SUSE), Masahiro Yamada, Shrikanth Hegde, Stephen
Rothwell, Venkat Rao Bagalkote, and Xichao Zhao
* tag 'powerpc-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/boot/install.sh: Fix shellcheck warnings
powerpc/prom_init: Fix shellcheck warnings
powerpc/kvm: Fix ifdef to remove build warning
powerpc: unify two CONFIG_POWERPC64_CPU entries in the same choice block
powerpc: use always-y instead of extra-y in Makefiles
powerpc/64: Drop unnecessary 'rc' variable
powerpc: Use dev_fwnode()
KVM: PPC: Fix misleading interrupts comment in kvmppc_prepare_to_enter()
Marc Zyngier [Sat, 9 Aug 2025 14:48:10 +0000 (15:48 +0100)]
KVM: arm64: nv: Fix ATS12 handling of single-stage translation
Volodymyr reports that using a Xen DomU as a nested guest (where
HCR_EL2.E2H == 0), ATS12 results in a translation that stops at
the L2's S1, which isn't something you'd normally expects.
Comparing the code against the spec proves to be illuminating,
and suggests that the author of such code must have been tired,
cross-eyed, drunk, or maybe all of the above.
The gist of it is that, apart from HCR_EL2.VM or HCR_EL2.DC being
0, only the use of the EL2&0 translation regime limits the walk
to S1 only, and that we must finish the S2 walk in any other case.
Which solves the above issue, as E2H==0 indicates that ATS12 walks
the EL1&0 translation regime.
projects / thirdparty / linux.git / log
