Jonas Jelonek [Mon, 8 Jun 2026 09:37:29 +0000 (09:37 +0000)]
MIPS: smp: report dying CPU to RCU in stop_this_cpu()
smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function
marks the CPU offline for the scheduler via set_cpu_online(false) but
never informs RCU, so RCU keeps expecting a quiescent state from CPUs
that are now spinning forever with interrupts disabled.
As long as nothing waits for an RCU grace period after smp_send_stop()
this is harmless, which is why it went unnoticed. Since commit 91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
however, irq_work_sync() calls synchronize_rcu() on architectures without
an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns
false. That is the asm-generic default used by MIPS. Any irq_work_sync()
issued in the reboot/shutdown path after smp_send_stop() then blocks on
a grace period that can never complete, hanging the reboot:
WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on
...
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu: Offline CPU 1 blocking current GP.
rcu: Offline CPU 2 blocking current GP.
rcu: Offline CPU 3 blocking current GP.
This issue was noticed on several Realtek MIPS switch SoCs (MIPS
interAptiv) and came up during kernel bump downstream in OpenWrt from
6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable
branch. The patch also has been backported all the way back to 6.1.
Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the
generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs
and grace periods can still complete. MIPS shuts down all CPUs here
without going through the CPU-hotplug mechanism, so this report is not
otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug
offline path is not unprecedented: arm64 does the same in cpu_die_early().
There it is an exception for a CPU that was coming online and is aborting
bringup, rather than the default shutdown action as on MIPS.
Fixes: 91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT") CC: stable@vger.kernel.org Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This patch addresses a critical memory management flaw. When
CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer.
Consequently, sizeof(new_mask) evaluates to the pointer size, causing
copy_from_user() to clobber the mask pointer. Furthermore, the old
logic performed copy_from_user() before allocating the mask.
Fix this by allocating new_mask first. To handle variable-sized user
masks correctly, use cpumask_size() to truncate overly large user masks
or pad undersized masks with zeros before copying the data directly into
the allocated buffer.
Fixes: 295cbf6d63165 ("[MIPS] Move FPU affinity code into separate file.") Cc: stable@vger.kernel.org Signed-off-by: Aaron Tomlin <atomlin@atomlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Yadan Fan [Mon, 25 May 2026 04:04:36 +0000 (12:04 +0800)]
MIPS: mm: Fix out-of-bounds write in maar_res_walk()
maar_res_walk() uses wi->num_cfg as the index into the fixed-size
wi->cfg array, but checks whether the array is full only after it has
filled the selected entry. If walk_system_ram_range() reports more than
16 memory ranges, the overflow call writes one struct maar_config past
the end of the array before WARN_ON() prevents num_cfg from advancing.
Move the full-array check before taking the array slot and return non-zero
when the scratch array is full, so walk_system_ram_range() terminates the
walk instead of invoking the callback for further ranges.
Fixes: a5718fe8f70f ("MIPS: mm: Drop boot_mem_map") Signed-off-by: Yadan Fan <ydfan@suse.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Rosen Penev [Wed, 27 May 2026 22:25:04 +0000 (15:25 -0700)]
MIPS: ath79: reduce ARCH_DMA_MINALIGN
Currently, ath79 SoCs use the default ARCH_DMA_MINALIGN value of 128
bytes defined in mach-generic. This is excessive for these platforms
and leads to significant memory waste in kmalloc.
Override ARCH_DMA_MINALIGN to use L1_CACHE_BYTES, which is 32 bytes for
ath79 SoCs.
Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Rosen Penev [Mon, 8 Jun 2026 05:32:02 +0000 (22:32 -0700)]
mips: dts: ar9132: fix wdt node name
Fixes the following warning:
$nodename:0: 'wdt@18060008' does not match
'^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/watchdog/qca,ar7130-wdt.yaml#
Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: mm: remove comment referring to removed CONFIG_MIPS_CMP
CMP support was removed in commit 7fb6f7b0af67 ("MIPS: Remove
deprecated CONFIG_MIPS_CMP"), but a comment referring to it remained in
arch/mips/mm/c-r4k.c. Remove it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Dmitry Torokhov [Tue, 26 May 2026 16:40:37 +0000 (18:40 +0200)]
MIPS: alchemy: db1300: switch to static device properties
Convert "5way switch" gpio-keys device and smsc911x ethernet controller
to use static device properties instead of bespoke platform data
structures for configuration.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[Bartosz: use platform_device_info::swnode] Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Dmitry Torokhov [Tue, 26 May 2026 16:40:36 +0000 (18:40 +0200)]
MIPS: alchemy: gpr: switch to static device properties
Convert I2C-gpio device and GPIO-connected LEDs on GPR board to software
nodes/properties, so that support for platform data can be removed from
gpio-leds driver (which will rely purely on generic device properties
for configuration).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[Bartosz: use platform_device_info::swnode] Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Dmitry Torokhov [Tue, 26 May 2026 16:40:35 +0000 (18:40 +0200)]
MIPS: alchemy: db1000: use nodes attached to GPIO chips in properties
GPIO subsystem is switching the way it locates GPIO chip instances for
GPIO references in software nodes by doing identity matching instead of
matching on node names. Switch to using software nodes attached to gpio
chips instead of using freestanding software nodes.
Also stop supplying platform data for the spi-gpio controller since
spi-gpio driver can derive number of chipselect lines from device
properties.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Dmitry Torokhov [Tue, 26 May 2026 16:40:34 +0000 (18:40 +0200)]
MIPS: alchemy: mtx1: attach software nodes to GPIO chips
GPIO subsystem is switching the way it locates GPIO chip instances for
GPIO references in software nodes from matching on node names to
identity matching, which necessitates assigning firmware nodes
(software nodes) to GPIO chips.
Move the node definitions for alchemy-gpio1 and alchemy-gpio2 to
arch/misp/alchemy/common/gpiolib.c, register them there, and attach
them to gpio_chip instances. Adjust MTX1 board file to use these nodes.
Note that because nodes need to be registered before they can be used in
PROPERTY_ENTRY_GPIO() we have to do the registration at
postcore_initcall level, otherwise (due to the link order) MTX1 board
initialization code will run first.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[Bartosz: use platform_device_info::swnode] Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: alchemy: provide visible function prototypes to board files
Board files under arch/mips/alchemy/ define functions called from
db1xxx.c but their prototypes are only in that .c file instead of being
declared in a common header. This causes several build warnings about
missing prototypes. Provide these prototypes in a new header and include
it where necessary.
Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull in the platform.h header into platform.c to fix the following
warning:
arch/mips/alchemy/devboards/platform.c:68:12: warning: no previous prototype for ‘db1x_register_pcmcia_socket’ [-Wmissing-prototypes]
68 | int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/alchemy/devboards/platform.c:152:12: warning: no previous prototype for ‘db1x_register_norflash’ [-Wmissing-prototypes]
152 | int __init db1x_register_norflash(unsigned long size, int width,
| ^~~~~~~~~~~~~~~~~~~~~~
Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Johan Hovold [Fri, 24 Apr 2026 10:28:47 +0000 (12:28 +0200)]
MIPS: ip22-gio: fix device reference leak in probe
The gio probe function needlessly takes a device reference which is
never released and therefore prevents unbound gio devices from being
freed.
Fixes: e84de0c61905 ("MIPS: GIO bus support for SGI IP22/28") Cc: stable@vger.kernel.org # 3.3 Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Johan Hovold [Fri, 24 Apr 2026 10:28:46 +0000 (12:28 +0200)]
MIPS: ip22-gio: fix gio device memory leak
The gio device release callback was never wired up so gio devices are
not freed when the last reference is dropped.
Fixes: e84de0c61905 ("MIPS: GIO bus support for SGI IP22/28") Cc: stable@vger.kernel.org # 3.3 Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Both have the same prompt, depends, default, and help text. Since
arch/mips/mobileye/Kconfig is sourced from arch/mips/Kconfig, both
definitions are parsed and the symbol ends up with two prompts.
The symbol was first introduced in commit 101bd58fde10 ("MIPS: Add
support for Mobileye EyeQ5") directly in
arch/mips/Kconfig. Three months later, commit fbe0fae601b7 ("MIPS:
mobileye: Add EyeQ6H support") created the
arch/mips/mobileye/Kconfig sub-file to organize the growing Mobileye
platform code and added the MACH_EYEQ5/MACH_EYEQ6H choice along with
a copy of FIT_IMAGE_FDT_EPM5. However, the original definition in
arch/mips/Kconfig was not removed at that time, leaving a duplicate.
Remove the definition from arch/mips/Kconfig, keeping the one in
arch/mips/mobileye/Kconfig where it belongs alongside the related
MACH_EYEQ5 machine type definition that it depends on.
Qingfang Deng [Tue, 28 Apr 2026 08:25:40 +0000 (16:25 +0800)]
MIPS: ralink: reduce ARCH_DMA_MINALIGN
Currently, Ralink SoCs use the default ARCH_DMA_MINALIGN value of 128
bytes defined in mach-generic. This is excessive for these platforms
and leads to significant memory waste in kmalloc.
Override ARCH_DMA_MINALIGN to use L1_CACHE_BYTES, which is 16 bytes for
RT288X and 32 bytes for other Ralink SoCs.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Costa Shulyupin [Fri, 15 May 2026 18:50:41 +0000 (21:50 +0300)]
include: Remove unused jz4740-battery.h
The last user was removed in commit aea12071d6fc
("power/supply: Drop obsolete JZ4740 driver") and replaced by
a self-contained IIO-based driver. No file includes this header.
Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Costa Shulyupin [Fri, 15 May 2026 18:42:23 +0000 (21:42 +0300)]
include: Remove unused jz4740-adc.h
The last user was the JZ4740 MFD ADC driver, removed in commit ff71266aa490 ("mfd: Drop obsolete JZ4740 driver") and replaced
by a self-contained IIO driver. No file includes or references
this header.
Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Rosen Penev [Thu, 7 May 2026 23:23:23 +0000 (16:23 -0700)]
mips: cps: Assemble jr.hb with an R2 ISA level
A MIPS allmodconfig built with LLVM can select CPU_MIPS32_R1 together
with MIPS_MT_SMP. In that configuration clang invokes the integrated
assembler with -march=mips32, and the MIPS MT path in cps-vec.S fails
to assemble two jr.hb instructions:
arch/mips/kernel/cps-vec.S:376:2: error: instruction requires
a CPU feature not currently enabled
arch/mips/kernel/cps-vec.S:490:4: error: instruction requires
a CPU feature not currently enabled
The earlier jr.hb in the same file is already assembled inside a .set
MIPS_ISA_LEVEL_RAW scope. The two failing sites are reached after
popping back to the file's base ISA level, so LLVM correctly rejects
them for an R1 target.
Wrap those jr.hb instructions in the same ISA-level push/pop used by
the working site. This keeps the MT code unchanged while making the
required R2 hazard-branch encoding explicit to the assembler.
Assisted-by: Codex:GPT-5.5 Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: DEC: Prevent initial console buffer from landing in XKPHYS
In 64-bit configurations calling the initial console output handler from
a kernel thread other than the initial one will result in a situation
where the stack has been placed in the XKPHYS 64-bit memory segment and
consequently so has been the buffer allocated there that is used as the
argument corresponding to the `%s' output conversion specifier for the
firmware's printf() entry point.
This 64-bit address will then be truncated by 32-bit firmware, resulting
in an attempt to access the wrong memory location, which in turn will
cause all kinds of unpredictable behaviour, such as a kernel crash:
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception in interrupt
KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8)
>>
In this case the pointer in $4 was truncated from 0x980000000203bd00 to
0x000000000203bd00.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started.
Fix the issue by making the buffer static and initdata, and therefore
placed in the CKSEG0 32-bit compatibility segment, observing that the
console output handler is called with the console lock held, implying
no need for this code to be reentrant. Add an assertion to verify the
buffer actually has been placed in a compatibility segment.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf()
In 64-bit configurations calling any firmware entry points from a kernel
thread other than the initial one will result in a situation where the
stack has been placed in the XKPHYS 64-bit memory segment.
Consequently the stack pointer is no longer a 32-bit value and when the
32-bit firmware code called uses 32-bit ALU operations to manipulate the
stack pointer, the calculated result is incorrect (in fact in the 64-bit
MIPS ISA almost all 32-bit ALU operations will produce an unpredictable
result when executed on 64-bit data) and control goes astray.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap, or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started, and the kernel will hang at:
pid_max: default: 32768 minimum: 301
or somewhat later, but always before:
cblist_init_generic: Setting adjustable number of callback queues.
has been printed.
It seems that only the prom_printf() entry point is affected. Of all
the other entry points wired only rex_slot_address() and rex_gettcinfo()
are called from a kernel thread other than the initial one, specifically
kernel_init(), and they are leaf functions that do no business with the
stack, having worked with no issue ever since 64-bit support was added
for the platform back in 2002.
To address this issue then, arrange for the stack to be switched in the
o32 wrapper as required for prom_printf() only, by supplying call_o32()
with a pointer to a chunk of initdata space, which is placed in the
CKSEG0 32-bit compatibility segment, observing that prom_printf() is
only called from console output handler and therefore with the console
lock held, implying no need for this code to be reentrant.
Other firmware entry points may be called with interrupts enabled and no
lock held, and may therefore require that call_o32() be reentrant. They
trigger no issue at this point and "if it ain't broke, don't fix it," so
just leave them alone.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: DEC: Remove IRQF_ONESHOT reference for IOASIC DMA error IRQs
There is no need for IOASIC DMA error interrupts to use the IRQF_ONESHOT
flag, because while they do need to have the source cleared only at the
conclusion of handling, the action handler supplied is either run in the
hardirq context with interrupts disabled at the CPU level or, where IRQ
threading has been forced, the primary handler has the IRQF_ONESHOT flag
implicitly added and therefore the original action handler, now run as
the thread handler and with interrupts enabled in the CPU, is executed
with the originating interrupt line masked. Therefore no interrupt will
retrigger regardless until the original request has been handled.
Link: https://lore.kernel.org/r/20260127135334.qUEaYP9G@linutronix.de/ Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove a bunch of compilation warnings for halt/reset handlers:
arch/mips/dec/reset.c:22:17: warning: no previous prototype for 'dec_machine_restart' [-Wmissing-prototypes]
22 | void __noreturn dec_machine_restart(char *command)
| ^~~~~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:27:17: warning: no previous prototype for 'dec_machine_halt' [-Wmissing-prototypes]
27 | void __noreturn dec_machine_halt(void)
| ^~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:32:17: warning: no previous prototype for 'dec_machine_power_off' [-Wmissing-prototypes]
32 | void __noreturn dec_machine_power_off(void)
| ^~~~~~~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:38:13: warning: no previous prototype for 'dec_intr_halt'
[-Wmissing-prototypes]
38 | irqreturn_t dec_intr_halt(int irq, void *dev_id)
| ^~~~~~~~~~~~~
(which get promoted to compilation errors with CONFIG_WERROR), by moving
the local prototypes from arch/mips/dec/setup.c to a dedicated header
for arch/mips/dec/reset.c to use as well. No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
As from commit 8f99a1626535 ("MIPS: Tracing: Add IRQENTRY_EXIT section
for MIPS") do_IRQ() is not a macro anymore and can be invoked directly
from assembly code, as a tail call. Remove the dec_irq_dispatch() stub
then and the indirection previously introduced with commit 187933f23679
("[MIPS] do_IRQ cleanup"), improving performance by reducing the number
of control flow changes and the overall instruction count, while fixing
a compiler's complaint about a missing prototype for said stub:
arch/mips/dec/setup.c:780:25: warning: no previous prototype for 'dec_irq_dispatch' [-Wmissing-prototypes]
780 | asmlinkage unsigned int dec_irq_dispatch(unsigned int irq)
| ^~~~~~~~~~~~~~~~
(which gets promoted to a compilation error with CONFIG_WERROR).
Fixes: 8f99a1626535 ("MIPS: Tracing: Add IRQENTRY_EXIT section for MIPS") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: Make do_IRQ() available for assembly callers
As from commit 8f99a1626535 ("MIPS: Tracing: Add IRQENTRY_EXIT section
for MIPS") do_IRQ() is not a macro anymore and can be invoked directly
from assembly code again, however its `asmlinkage' annotation has never
been brought back from the previous removal of the function with commit 187933f23679 ("[MIPS] do_IRQ cleanup").
Since calling the function directly from assembly code has a performance
advantage, add the annotation back so that the DEC platform can make use
of this again.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: Fix big-endian stack argument fetching in o32 wrapper
Fix an issue in call_o32() where the upper 32-bit half of incoming n64
stack arguments is fetched and used for outgoing o32 stack arguments on
big-endian platforms.
This code was adapted from arch/mips/dec/prom/call_o32.S which was meant
for a little-endian platform only and therefore using 32-bit loads from
64-bit stack slot locations holding incoming stack arguments resulted in
correct values being retrieved for data that is expected to be 32-bit.
This works on little-endian platforms where the lower 32-bit half of the
64-bit value is located at every 64-bit stack slot location. However on
big-endian platforms the lower 32-bit half is instead located at offset
4 from every 64-bit stack slot location.
So to fix the issue the offset of 4 would have to be used on big-endian
platforms only, or alternatively a 64-bit load from the 64-bit stack
slot location can be used across the board, as the subsequent 32-bit
store to the corresponding outgoing stack argument slot will correctly
truncate the value and cause no unpredictable result. We already take
advantage of this architectural feature for the incoming arguments held
in $a6 and $a7 registers, since the o32 wrapper does not know how many
incoming arguments there are and consequently propagates incoming data
which may not be 32-bit.
Since this code is generally supposed to be used with the stack located
in cached memory there is no extra overhead expected for 64-bit loads as
opposed to 32-bit ones, so pick this variant for code simplicity.
Fixes: 231a35d37293 ("[MIPS] RM: Collected changes") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: RB532: attach the software node to its target GPIO controller
GPIOLIB wants to remove the software node's name matching against GPIO
controller's label that is going on behind the scenes in software node
lookup. To that end, we need to convert all existing users to using
software nodes actually attached to the GPIO devices they represent.
In order to use an attached software node with the GPIO controller on
rb532: convert the GPIO module into a real platform device, provide
platform device info for it in device.c and assign the software node
using its swnode field.
The software node will get inherited by the GPIO chip from the parent
platform device in devm_gpiochip_add_data() as we don't set the fwnode
using any other of the mechanisms.
Linus Torvalds [Sun, 24 May 2026 19:50:36 +0000 (12:50 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Fix ITS EventID sanitisation when restoring an interrupt
translation table.
- Fix PPI memory leak when failing to initialise a vcpu.
- Correctly return an error when the validation of a hypervisor trace
descriptor fails, and limit this validation to protected mode only.
RISC-V:
- Fix invalid HVA warning in steal-time recording
- Return SBI_ERR_FAILURE to guest upon OOM in pmu_event_info() and
pmu_snapshot_set_shmem()
- Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
- Fix sign extension of value for MMIO loads
s390:
- Fix bugs in vSIE (nested virtualization) and UCONTROL, caused by
the page table rewrite.
x86:
- Apply erratum #1235 workaround (disable AVIC IPI virtualization) on
Hygon Family 18h, just like on AMD Family 17h.
- When KVM_CAP_X86_APIC_BUS_CYCLES_NS is queried on a specific VM,
return the VM's configured APIC bus frequency instead of the
default. This is less confusing (read: not wrong) and makes it
easier to fill in CPUID information that communicates the APIC bus
frequency to the guest.
Selftests:
- Do not include glibc-internal <bits/endian.h>; it worked by chance
and broke building KVM selftests with musl"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235)
KVM: selftests: Verify that KVM returns the configured APIC cycle length
KVM: x86: Return the VM's configured APIC bus frequency when queried
KVM: selftests: elf: Include <endian.h> instead of <bits/endian.h>
KVM: s390: Properly reset zero bit in PGSTE
KVM: s390: vsie: Fix redundant rmap entries
KVM: s390: vsie: Fix unshadowing logic
KVM: s390: Fix leaking kvm_s390_mmu_cache in case of errors
KVM: s390: vsie: Fix memory leak when unshadowing
KVM: arm64: Fix nVHE/pKVM hyp tracing error on invalid desc
KVM: arm64: vgic: Free private_irqs when init fails after allocation
KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits
RISC-V: KVM: Fix sign extension for MMIO loads
RISC-V: KVM: Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
riscv: kvm: return SBI_ERR_FAILURE for pmu_event_info() when OOM
riscv: kvm: return SBI_ERR_FAILURE for pmu_snapshot_set_shmem() when OOM
RISC-V: KVM: Fix invalid HVA warning in steal-time recording
Linus Torvalds [Sun, 24 May 2026 18:00:45 +0000 (11:00 -0700)]
Merge tag 'x86-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- On SEV guests, handle set_memory_{encrypted,decrypted}() failures
more conservatively by assuming that all affected pages are
unencrypted (Carlos López)
- Disable broadcast TLB flush when PCID is disabled (Tom Lendacky)
- Fix VMX vs. hrtimer_rearm_deferred() regression (Peter Zijlstra)
- Move IRQ/NMI dispatch code from KVM into x86 core, to prepare for a
KVM x2apic fix (Peter Zijlstra)
* tag 'x86-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sev-guest: Explicitly leak pages in unknown state
x86/mm: Disable broadcast TLB flush when PCID is disabled
x86/kvm/vmx: Fix VMX vs hrtimer_rearm_deferred()
x86/kvm/vmx: Move IRQ/NMI dispatch from KVM into x86 core
x86/vdso: Fix incorrect size in munmap() on map_vdso() failure
Linus Torvalds [Sun, 24 May 2026 17:55:21 +0000 (10:55 -0700)]
Merge tag 'irq-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irqchip driver fixes from Ingo Molnar:
- Fix the hardware probing error path of the renesas-rzt2h
irqchip driver
- Fix the exynos-combiner irqchip driver on -rt kernels
by turning the IRQ controller spinlock into a raw spinlock
* tag 'irq-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzt2h: Use pm_runtime_put_sync() in probe error path
irqchip/exynos-combiner: Switch to raw_spinlock
Linus Torvalds [Sun, 24 May 2026 17:48:55 +0000 (10:48 -0700)]
Merge tag 'core-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fix from Ingo Molnar::
- Fix debugobjects regression on -rt kernels: don't fill the pool
(which uses a coarse lock) if ->pi_blocked_on, because that messes up
the priority inheritance of callers
* tag 'core-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Do not fill_pool() if pi_blocked_on
Linus Torvalds [Sun, 24 May 2026 17:37:55 +0000 (10:37 -0700)]
Merge tag 'hwmon-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- adm1266: Various fixes from Abdurrahman Hussain
The fixed issues were reported by Sashiko as part of a code review of
a functional change in the driver.
- lenovo-ec-sensors: Convert to devm_request_region() to fix
release_region cleanup, and fix EC "MCHP" signature validation logic,
from Kean Ren
* tag 'hwmon-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/adm1266) serialize sequencer_state debugfs read with pmbus_lock
hwmon: (pmbus/adm1266) serialize NVMEM blackbox read with pmbus_lock
hwmon: (pmbus/adm1266) serialize GPIO PMBus accesses with pmbus_lock
hwmon: (pmbus/adm1266) register the nvmem device after pmbus_do_probe()
hwmon: (pmbus/adm1266) register the gpio_chip after pmbus_do_probe()
hwmon: (pmbus/adm1266) reject short block-read responses in the GPIO accessors
hwmon: (pmbus/adm1266) don't clobber GPIO bits before PDIO read in get_multiple
hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR
hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer
hwmon: (pmbus/adm1266) include adapter number in GPIO line label
hwmon: (pmbus/adm1266) include PEC byte in pmbus_block_xfer read buffer
hwmon: (pmbus/adm1266) reject implausible blackbox record_count
hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX
hwmon: (pmbus/adm1266) seed timestamp from the real-time clock
hwmon: (lenovo-ec-sensors): Fix EC "MCHP" signature validation logic
hwmon: (lenovo-ec-sensors): Convert to devm_request_region()
drm/msm: Restore second parameter name in purge() and evict()
After commit 3392291fc509 ("drm/msm: Fix shrinker deadlock"), all
supported versions of clang warn (or error with CONFIG_WERROR=y):
drivers/gpu/drm/msm/msm_gem_shrinker.c:105:58: error: omitting the parameter name in a function definition is a C23 extension [-Werror,-Wc23-extensions]
105 | purge(struct drm_gem_object *obj, struct ww_acquire_ctx *)
| ^
drivers/gpu/drm/msm/msm_gem_shrinker.c:117:58: error: omitting the parameter name in a function definition is a C23 extension [-Werror,-Wc23-extensions]
117 | evict(struct drm_gem_object *obj, struct ww_acquire_ctx *)
| ^
2 errors generated.
With older but supported versions of GCC, this is an unconditional hard error:
drivers/gpu/drm/msm/msm_gem_shrinker.c: In function 'purge':
drivers/gpu/drm/msm/msm_gem_shrinker.c:105:35: error: parameter name omitted
purge(struct drm_gem_object *obj, struct ww_acquire_ctx *)
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gem_shrinker.c: In function 'evict':
drivers/gpu/drm/msm/msm_gem_shrinker.c:117:35: error: parameter name omitted
evict(struct drm_gem_object *obj, struct ww_acquire_ctx *)
^~~~~~~~~~~~~~~~~~~~~~~
Restore the parameter name to clear up the warnings, renaming it
"unused" to make it clear it is only needed to satisfy the prototype of
drm_gem_lru_scan().
Linus Torvalds [Sun, 24 May 2026 16:53:17 +0000 (09:53 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix bpf_throw() and global subprog combination (Kumar Kartikeya
Dwivedi)
- Fix out of bounds access in BPF interpreter (Yazhou Tang)
- Fix potential out of bounds access in inner per-cpu array map
(Guannan Wang)
- Reject NULL data/sig in bpf_verify_pkcs7_signature (KP Singh)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: fix off-by-one in emit_signature_match jump offset
bpf: Reject NULL data/sig in bpf_verify_pkcs7_signature
selftests/bpf: Cover global subprog exception leaks
bpf: Check global subprog exception paths
bpf: make bpf_session_is_return() reference optional
bpf: Use array_map_meta_equal for percpu array inner map replacement
selftests/bpf: Add test for large offset bpf-to-bpf call
bpf: Fix s16 truncation for large bpf-to-bpf call offsets
bpf: Fix out-of-bounds read in bpf_patch_call_args()
Linus Torvalds [Sat, 23 May 2026 23:59:02 +0000 (16:59 -0700)]
Merge tag 'v7.1-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix for creating tmpfiles
- fix durable reconnect error path
- validate SID in security descriptor when inheriting DACL
* tag 'v7.1-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
smb/server: promote S_DEL_ON_CLS to S_DEL_PENDING when close
ksmbd: validate SID in parent security descriptor during ACL inheritance
ksmbd: fix durable reconnect error path file lifetime
Linus Torvalds [Sat, 23 May 2026 23:54:48 +0000 (16:54 -0700)]
Merge tag 'for-7.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A batch of fixes to simple quotas:
- add conditional rescheduling point not dependent on the lock during
inode iterations to avoid delays with PREEMPT_NONE enabled
- fix subvolume deletion so it does not break the squota invariants
- properly handle enabling squota, tracking extents in the initial
transaction
- catch and warn about underflows, clamp to zero to avoid further
problems
And one fix to inode size handling:
- fix handling of preallocated extents beyond i_size when not using
the no-holes feature"
* tag 'for-7.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: swallow btrfs_record_squota_delta() ENOENT
btrfs: clamp to avoid squota underflow
btrfs: fix squota accounting during enable generation
btrfs: check for subvolume before deleting squota qgroup
btrfs: always drop root->inodes lock before cond_resched()
btrfs: mark file extent range dirty after converting prealloc extents
Linus Torvalds [Sat, 23 May 2026 23:51:22 +0000 (16:51 -0700)]
Merge tag 'xfs-fixes-7.1-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Carlos Maiolino:
"A single fix for a race in xfs buffer cache which may lead to
filesystem shutdown due to inconsistent metadata if the buffer
lookup happens to find an old dead buffer still in the cache"
* tag 'xfs-fixes-7.1-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix a buffer lookup against removal race
Linus Torvalds [Sat, 23 May 2026 16:21:08 +0000 (09:21 -0700)]
Merge tag 'nios2_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux
Pull nios2 fixes from Dinh Nguyen:
- Implement _THIS_IP_ for inline asm
- Add Simon Schuster as a maintainer and mark the NIOS2 as Supported
* tag 'nios2_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: Implement _THIS_IP_ using inline asm
MAINTAINERS: arch/nios2: Add Simon Schuster as co-maintainer
Linus Torvalds [Sat, 23 May 2026 16:13:00 +0000 (09:13 -0700)]
Merge tag 'loongarch-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Rework KASLR to avoid initrd overlap, remove some unused code to avoid
a build warning, fix some bugs in kprobes and KVM"
* tag 'loongarch-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Move some variable declarations to paravirt.h
LoongArch: kprobes: Fix handling of fatal unrecoverable recursions
LoongArch: kprobes: Use larch_insn_text_copy() to patch instructions
LoongArch: Remove unused code to avoid build warning
LoongArch: Avoid initrd overlap during kernel relocation
LoongArch: Skip relocation-time KASLR if already applied
efi/loongarch: Randomize kernel preferred address for KASLR
KP Singh [Fri, 22 May 2026 21:53:36 +0000 (23:53 +0200)]
libbpf: fix off-by-one in emit_signature_match jump offset
The offset for the cleanup-label jump is computed before the MOV R7
instruction is emitted, but the JMP lands after it. Account for the
extra insn in the offset calculation (-2 instead of -1). Drop the
redundant self-loop in the else branch; gen->error = -ERANGE already
marks the generation as failed.
Linus Torvalds [Sat, 23 May 2026 14:49:05 +0000 (07:49 -0700)]
Merge tag 'driver-core-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Remove the software node on platform device release(); without this,
the software node remains registered after the device is gone and a
subsequent platform_device_register_full() reusing the same node
fails with -EBUSY
- In sysfs_update_group(), do not remove a pre-existing directory when
create_files() fails; the previous code would silently destroy a
sysfs group that the caller did not create
- Set fwnode->secondary to NULL in fwnode_init() to avoid dereferencing
uninitialized memory (e.g. in dev_to_swnode()) when the firmware node
is allocated on the stack or via a non-zeroing allocator
* tag 'driver-core-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
device property: set fwnode->secondary to NULL in fwnode_init()
sysfs: don't remove existing directory on update failure
driver core: platform: remove software node on release()
Linus Torvalds [Sat, 23 May 2026 14:17:27 +0000 (07:17 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- syzbot triggred crash in rxe due to concurrent plug/unplug
- Possible non-zero'd memory exposed to userspace in bnxt_re
- Malicous 'magic packet' with SIW causes a buffer overflow
- Tighten the new uAPI validation code to not crash in debugging prints
and have the right module dependencies in drivers
- mana was missing the max_msg_sz report to userspace
- UAF in rtrs on an error path
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rtrs: Fix use-after-free in path file creation cleanup
RDMA/mana_ib: Report max_msg_sz in mana_ib_query_port
RDMA/core: Do not read wild stack memory in uverbs_get_handler_fn()
RDMA/core: Move the _ib_copy_validate_udata* functions to ib_core_uverbs
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
RDMA/bnxt_re: zero shared page before exposing to userspace
selftests/rdma: explicitly skip tests when required modules are missing
RDMA/nldev: Add mutual exclusion in nldev_dellink()
Tina Zhang [Fri, 22 May 2026 04:00:14 +0000 (12:00 +0800)]
KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235)
Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and
share the same erratum #1235: hardware may read a stale IsRunning=1 bit
during ICR write emulation and silently fail to generate an
AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU.
The absence of the VM-Exit causes KVM to miss the required wakeup of
blocking target vCPUs, leading to hung vCPUs and unbounded delays in
guest execution.
Extend the existing AMD Family 17h erratum #1235 workaround to also cover
Hygon Family 18h. With IPI virtualization disabled, KVM never sets
IsRunning=1 in the Physical ID table, so every non-self IPI generates a
VM-Exit and is correctly emulated.
Fixes: 8de4a1c8164e ("KVM: SVM: Disable (x2)AVIC IPI virtualization if CPU has erratum #1235") Cc: <stable@vger.kernel.org> Signed-off-by: Tina Zhang <zhang_wei@open-hieco.net>
Message-ID: <20260522040014.3380201-1-zhang_wei@open-hieco.net>
KVM: selftests: Verify that KVM returns the configured APIC cycle length
Add checks in the APIC bus clock test to verify that querying
KVM_CAP_X86_APIC_BUS_CYCLES_NS on the VM after changing the frequency
returns the VM's actual APIC cycle length, not KVM's default. For
giggles, verify that KVM still returns its default frequency for the
system-scoped check.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260522173526.3539407-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Return the VM's configured APIC bus frequency when queried
When KVM_CAP_X86_APIC_BUS_CYCLES_NS is queried on a specific VM, return the
VM's configured APIC bus frequency, not KVM's default. Aside from the fact
that returning the default frequency is blatantly wrong if userspace has
changed the frequency, returning the configured frequency means userspace
can blindly trust the result, e.g. when filling PV CPUID information that
communicates the APIC bus frequency to the guest.
Fixes: 6fef518594bc ("KVM: x86: Add a capability to configure bus frequency for APIC timer") Reported-by: David Woodhouse <dwmw2@infradead.org> Closes: https://lore.kernel.org/all/ab84153e33fbe7c25667f595c56b310d4d5a93ef.camel@infradead.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260522173526.3539407-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 23 May 2026 08:04:35 +0000 (10:04 +0200)]
Merge tag 'kvm-riscv-fixes-7.1-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 7.1, take #1
- Fix invalid HVA warning in steal-time recording
- Return SBI_ERR_FAILURE to guest upon OOM in pmu_event_info()
and pmu_snapshot_set_shmem()
- Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
- Fix sign extension of value for MMIO loads
Linus Torvalds [Fri, 22 May 2026 23:43:33 +0000 (16:43 -0700)]
Merge tag 'sched_ext-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Spurious WARN in ops_dequeue() racing with concurrent dispatch
- Self-deadlock between scheduler disable and a concurrent sub-sched
enable
* tag 'sched_ext-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix spurious WARN on stale ops_state in ops_dequeue()
sched_ext: Fix deadlock between scx_root_disable() and concurrent forks
Linus Torvalds [Fri, 22 May 2026 23:28:47 +0000 (16:28 -0700)]
Merge tag 'cgroup-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Two rstat fixes:
- Out-of-bounds access in the css_rstat_updated() BPF kfunc when
called with an unchecked user-supplied cpu
- Over-strict NMI guard after the recent switch to try_cmpxchg left
sparc and ppc64 unable to queue rstat updates from NMI"
* tag 'cgroup-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: rstat: relax NMI guard after switch to try_cmpxchg
cgroup/rstat: validate cpu before css_rstat_cpu() access
Linus Torvalds [Fri, 22 May 2026 23:15:32 +0000 (16:15 -0700)]
Merge tag 'drm-fixes-2026-05-23' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes pull, amdgpu/xe being the usual, with bonus msm content
to bulk things out, otherwise it has the usual scattered changes, with
amdxdna dropping a badly thought out userspace api.
gem:
- clean up LRU locking
msm:
- Core:
- Fixed bindings for SM8650, SM8750 and Eliza
- Don't use UTS_RELEASE directly
- Fix typo in clock-names property
- DPU:
- Fixed CWB description on Kaanapali
- Fixed scanline strides for YUV UBWC formats
- Stopped DSI register dumping to access past the end of region
- DSI:
- Fix dumping unaligned regions
- GPU:
- Fix GMEM_BASE for a6xx gen3
- Fix userspace reachable crash on a2xx-a4xx
- Fix sysprof_active for counter collection with IFPC enabled GPUs
- Fix shrinker lockdep
xe:
- SRIOV related fixes
- Fix leak and double-free
- Multi-cast register fixes
- Multi-queue fix
i915:
- Fix joiner color pipeline selection [display]
- Fix readback for target_rr in Adaptive Sync SDP [dp]
- Apply Intel DPCD workaround when SDP on prior line used [psr]
amdxdna:
- remove mmap and export for ubuf
bridge:
- chipone-icn6211: managed bridge cleanup
- lt66121: acquire reset GPIO
- megachips: fix clean up on failed IRQ requests
v3d:
- fix UAF in error code paths
- release GEM-object ref on free'd jobs
virtio:
- use uninterruptible resv locking in plane updates
mediatek:
- fix sparse warnings"
* tag 'drm-fixes-2026-05-23' of https://gitlab.freedesktop.org/drm/kernel: (78 commits)
drm/xe/oa: Fix exec_queue leak on width check in stream open
drm/virtio: use uninterruptible resv lock for plane updates
drm/amdgpu: fix handling in amdgpu_userq_create
drm/radeon/evergreen_cs: Add missing NULL prefix check in surface check
drm/amdgpu: userq_va_mapped should remain true once done
drm/amdgpu: avoid integer overflow in VA range check
drm/amd/ras: Fix UMC error address allocation leak
drm/amdgpu: unmap all user mappings of framebuffer and doorbell before mode1 reset
drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async
drm/amd/display: Validate GPIO pin LUT table size before iterating
drm/amd/display: Fix integer overflow in bios_get_image()
drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
drm/amdgpu: use atomic operation to achieve lockless serialization
drm/amdkfd: Check bounds on allocate_doorbell
drm/amdgpu/vce3: Fix VCE 3 firmware size and offsets
drm/amdgpu/vce2: Fix VCE 2 firmware size and offsets
drm/amdgpu/vce1: Stop using amdgpu_vce_resume
drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets
drm/amdgpu/vce1: Don't repeat GTT MGR node allocation
drm/amdgpu/vce1: Check if VRAM address is lower than GART.
...
Linus Torvalds [Fri, 22 May 2026 23:08:06 +0000 (16:08 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small fixes, two in drivers and the remaining a sign conversion probem
in sd with no user visible consequences (non-zero is error)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: tcm_loop: Fix NULL ptr dereference
scsi: isci: Fix use-after-free in device removal path
scsi: sd: Fix return code handling in sd_spinup_disk()
- hp-wmi:
- Add thermal support for Omen 16-c0xxx (board 8902)
- intel/vsec:
- Fix enable_cnt imbalance due to PCIe error recovery
- surface/aggregator_registry:
- Remove battery & AC nodes on Surface Laptop 7 to avoid duplicated
devices
- uniwill-laptop:
- Handle uninitialized and invalid charging threshold values
- Accept charging threshold of 0 through power supply sysfs ABI and
clamp it to 1
- Make 'force' parameter to work also when device descriptor is
found
- Do not enable charging limit despite the 'force' parameter to
avoid permanent damage to battery
* tag 'platform-drivers-x86-v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (35 commits)
platform/x86: bitland-mifs-wmi: add CONFIG_LEDS_CLASS dependency
platform/x86: wireless-hotkey: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_haps: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_bluetooth: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_acpi: Check ACPI_COMPANION() against NULL
platform/x86: system76: Check ACPI_COMPANION() against NULL
platform/x86: sony-laptop: Check ACPI_COMPANION() against NULL
platform/x86: panasonic-laptop: Check ACPI_COMPANION() against NULL
platform/x86: lg-laptop: Check ACPI_COMPANION() against NULL
platform/x86: intel/smartconnect: Check ACPI_HANDLE() against NULL
platform/x86: intel/rst: Check ACPI_COMPANION() against NULL
platform/x86: fujitsu-tablet: Check ACPI_COMPANION() against NULL
platform/x86: fujitsu: Check ACPI_COMPANION() against NULL
platform/x86: eeepc-laptop: Check ACPI_COMPANION() against NULL
platform/x86: dell/dell-rbtn: Check ACPI_COMPANION() against NULL
platform/x86: asus-laptop: Check ACPI_COMPANION() against NULL
platform/x86: acer-wireless: Check ACPI_COMPANION() against NULL
platform/x86: asus-armoury: add support for GU605CP
platform/x86: asus-armoury: add support for FA401EA
platform/x86: asus-armoury: add support for G614FR
...
Linus Torvalds [Fri, 22 May 2026 20:19:41 +0000 (13:19 -0700)]
Merge tag 'spi-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Another batch of driver fixes from Johan fixing error handling paths,
plus another from Felix. We also have a new device ID added in the DT
bindings for SpacemiT K3"
* tag 'spi-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: fsl-qspi: support SpacemiT K3
spi: ti-qspi: fix use-after-free after DMA setup failure
spi: sprd: fix error pointer deref after DMA setup failure
spi: qup: fix error pointer deref after DMA setup failure
spi: mtk-snfi: Fix resource leak in mtk_snand_read_page_cache()
spi: ep93xx: fix error pointer deref after DMA setup failure
Linus Torvalds [Fri, 22 May 2026 20:17:29 +0000 (13:17 -0700)]
Merge tag 'regulator-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes here, one very minor Kconfig fix and a fix for a
nasty issue with error reporting in the tps65219 driver"
* tag 'regulator-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65219: fix irq_data.rdev not being assigned
regulator: Kconfig: fix a typo in help
Linus Torvalds [Fri, 22 May 2026 19:28:47 +0000 (12:28 -0700)]
Merge tag 'gpio-fixes-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- propagate the error code from regulator_enable() in resume path in
gpio-pca953x
- take the device lock when calling device_is_bound() in virtual GPIO
drivers
- fix software node leak in remove path in gpio-aggregator
- fix a potential use-after-free in gpio-aggregator
- harden the GPIO character device uAPI: check that line config
attributes are correctly zeroed
* tag 'gpio-fixes-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: lock device when calling device_is_bound()
gpio: aggregator: lock device when calling device_is_bound()
gpio: sim: lock device when calling device_is_bound()
gpio: aggregator: remove the software node when deactivating the aggregator
gpio: aggregator: fix a potential use-after-free
gpio: cdev: check if uAPI v2 config attributes are correctly zeroed
gpio: pca953x: propagate regulator_enable() error from resume
Linus Torvalds [Fri, 22 May 2026 19:22:22 +0000 (12:22 -0700)]
Merge tag 'sound-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As expected, we still continue receiving lots of small fixes.
One major change is about HD-audio pending IRQ handling, but this
would influence only on odd machines or slow VMs. There are a few
other fixes for the core part, but most of them are not-too-serious
UAF fixes, while the rest are mostly device-specific fixes and quirks.
ALSA Core:
- Fix for PCM silencing with bogus iov_iter
- Fixes for past-the-end iterators in timer and seq
- Serialization of UMP output teardown
- Rate-limit ELD parsing errors
HD-audio:
- Fixes for IRQ work handling and SSID matching
- Various Realtek quirks for HP and ASUS laptops, including LED fixes
ASoC:
- Intel: ACPI match table updates for PTL, NVL, and ARL platforms
- Cirrus Logic: Fixes for cs-amp-lib and cs35l56 codecs
- Various platform fixes for AMD, FSL SAI, TI OMAP, and Qualcomm
- DT-binding fix for MediaTek
Others:
- USB ua101: Reject too-short USB descriptors
- Scarlett2: Fix for flash writes
- ASIHPI: Fix for potential OOB access
- AMD SPI: Fix for bus number in ACPI probe
MAINTAINERS:
- Updates for SOF and TI maintainers"
* tag 'sound-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (47 commits)
ASoC: codecs: pcm512x: fix null-ptr dereference in pcm512x_overclock_xxx_put()
ASoC: Intel: soc-acpi-intel-ptl-match: Remove unnecessary cs42l43 match
ASoC: soc-acpi-intel-ptl-match: Make Chrome matches conditional
ASoC: Intel: soc-acpi: Add entry for sof_es8336 in NVL match table.
ASoC: Intel: sof_sdw: Add support for nvlrvp in NVL platform
ASoC: cs-amp-lib: Fix typo in error message: write -> read
ASoC: cs-amp-lib: Fix missing dput() after debugfs_lookup()
ASoC: cs-amp-lib: Fix wrong sizeof() in _cs_amp_set_efi_calibration_data()
ASoC: cs35l56: Fix flushing of IRQ work in cs35l56_sdw_remove()
MAINTAINERS: ASoC: Intel/SOF: Remove Ranjani Sridharan as maintainer
ALSA: seq: Serialize UMP output teardown with event_input
ALSA: scarlett2: Allow flash writes ending at segment boundary
ALSA: hda/realtek: Add LED quirk for HP ProBook 430 G6
ALSA: hda/intel: Make sure to cancel irq-pending work at closing PCM stream
ALSA: hda: Move irq pending work into hda-intel stream
ASoC: soc-utils: Add missing va_end in snd_soc_ret()
ALSA: ua101: Reject too-short USB descriptors
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP 16 Piston OmniBook X
ALSA: seq: avoid past-the-end iterator in snd_seq_create_port()
ALSA: timer: avoid past-the-end iterator in snd_timer_dev_register()
...
Linus Torvalds [Fri, 22 May 2026 19:06:23 +0000 (12:06 -0700)]
Merge tag 'block-7.1-20260522' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix memory leak for peer-to-peer addresses
- Fix dma map leaks on resource errors
- Another bio integrity fix, fixing a recent regression
- Fix for an issue with the request pre-allocation and caching when IO
is queued, where if a bio split occurred and ended up blocking, the
list could be corrupted
* tag 'block-7.1-20260522' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: avoid use-after-free in disk_free_zone_resources()
blk-mq: pop cached request if it is usable
nvme-pci: fix dma mapping leak on data setup error
nvme-pci: fix dma_vecs leak on p2p memory
bio-integrity-fs: pass data iter to bio_integrity_verify()
Linus Torvalds [Fri, 22 May 2026 18:53:28 +0000 (11:53 -0700)]
Merge tag 'io_uring-7.1-20260522' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix for an issue with IORING_OP_NOP and using injection results
- Fix for an issue in IORING_OP_WAITID, where the info state was
assumed cleared by the lower level syscall handler, but for some
cases it is not. Just clear the data upfront, so that non-initialized
data isn't copied back to userspace
- Fix for a lockdep reported issue, where IORING_OP_BIND enters file
create and hence hits mnt_want_write(), which creates a three part
lockdep cycle between the super lock, io_uring's uring_lock, and the
cred mutex
- Fix a regression introduced in this cycle with how linked timeouts
are deleted
- Ensure that the ->opcode nospec indexing on the opcode issue side
covers all the cases
* tag 'io_uring-7.1-20260522' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/nop: pass all errors to userspace
io_uring/timeout: splice timed out link in timeout handler
io_uring: propagate array_index_nospec opcode into req->opcode
io_uring/waitid: clear waitid info before copying it to userspace
io_uring/net: punt IORING_OP_BIND async if it needs file create
Linus Torvalds [Fri, 22 May 2026 17:52:26 +0000 (10:52 -0700)]
Merge tag 'v7.1-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix missing lock
- Fix dentry in use after unmounting
- cifs.upcall security fix
- require CAP_NET_ADMIN for swn netlink
- change allocation in DUP_CTX_STR to GFP_KERNEL
- minor smbdirect debug fix
- handle_read_data() folio fix
* tag 'v7.1-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: change allocation requirements in DUP_CTX_STR macro
smb: client: require net admin for CIFS SWN netlink
smb: smbdirect: divide, not multiply, milliseconds by 1000
cifs: Fix busy dentry used after unmounting
smb: client: use data_len for SMB2 READ encrypted folioq copy
smb: client: reject userspace cifs.spnego descriptions
smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked()
Linus Torvalds [Fri, 22 May 2026 14:13:13 +0000 (07:13 -0700)]
Merge tag 'pm-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix maximum frequency computation in the intel_pstate driver for
two processor models, update its documentation and fix issues related
to the dynamic EPP support (added during the current development
cycle) in the amd-pstate driver:
- Fix maximum frequency computation in the intel_pstate driver for
Raptor Lake-E and Bartlett Lake that are SMP platforms derived from
hybrid ones (Rafael Wysocki, Henry Tseng)
- Fix the description of asymmetric packing with SMT in the
intel_pstate driver documentation (Ricardo Neri)
- Fix multiple amd-pstate driver issues related to dynamic EPP
support added recently, including making it opt-in only (K Prateek
Nayak, Mario Limonciello)"
* tag 'pm-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Drop Kconfig option for dynamic EPP
cpufreq: intel_pstate: Use HYBRID_SCALING_FACTOR_ADL for Bartlett Lake
cpufreq: intel_pstate: Use correct scaling factor on Raptor Lake-E
Documentation: intel_pstate: Fix description of asymmetric packing with SMT
cpufreq/amd-pstate-ut: Drop policy reference before driver switch
cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled
cpufreq/amd-pstate: Reorder notifier unregistration and floor perf reset
cpufreq/amd-pstate: Allow writes to dynamic_epp when state isn't modified
cpufreq/amd-pstate: Return -ENOMEM on failure to allocate profile_name
cpufreq/amd-pstate: Grab "amd_pstate_driver_lock" when toggling dynamic_epp
Linus Torvalds [Fri, 22 May 2026 14:06:21 +0000 (07:06 -0700)]
Merge tag 'acpi-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fix from Rafael Wysocki:
"Unbreak system wakeup on critical battery status in the ACPI battery
driver inadvertently broken during the 7.0 development cycle"
* tag 'acpi-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: battery: Fix system wakeup on critical battery status
Damien Le Moal [Fri, 22 May 2026 11:56:22 +0000 (20:56 +0900)]
block: avoid use-after-free in disk_free_zone_resources()
The function disk_update_zone_resources() may call
disk_free_zone_resources() in case of error, and following this,
blk_revalidate_disk_zones() will again calls disk_free_zone_resources() if
disk_update_zone_resources() failed. If a zone worker thread is being used
(which is the default for a rotational media zoned device),
disk_free_zone_resources() will try to stop the zone worker thread twice
because disk->zone_wplugs_worker is not reset to NULL when the worker
thread is stopped the first time.
In disk_free_zone_resources(), fix this by correctly clearing
disk->zone_wplugs_worker to NULL when the worker thread is stopped.
And while at it, since disk_free_zone_resources() is always called after a
failed call to disk_update_zone_resources(), remove the unnecessary call
to disk_free_zone_resources() in disk_update_zone_resources().
Fixes: 1365b6904fd0 ("block: allow submitting all zone writes from a single context") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://patch.msgid.link/20260522115622.588535-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 22 May 2026 13:53:11 +0000 (06:53 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Handle probe on hinted conditional branch instructions.
BC.cond instructions can be simulated in the same way as B.cond
instructions, so extend the decode mask for B.cond to cover BC.cond
- Flush the walk cache when unsharing PMD tables. Recent changes to
huge_pmd_unshare() introduced mmu_gather::unshared_tables but the
arm64 code was still treating the TLB flushing as only targeting leaf
entries (TLBI VALE1IS).
Fix it by using non-leaf-only instructions (TLBI VAE1IS) when
tlb->unshared_tables is set
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Flush walk cache when unsharing PMD tables
arm64: probes: Handle probes on hinted conditional branch instructions
Linus Torvalds [Fri, 22 May 2026 13:40:31 +0000 (06:40 -0700)]
Merge tag 's390-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix PAI NNPA mismatch between counting and recording, where sampling
reports twice the value
- Fix loss of PAI counter increments during recording on systems with
many CPUs under heavy load, while counting is not affected
- On some supported machines, CHSC cannot access memory outside the DMA
zone, causing CHSC command failures. Restore GFP_DMA flag when
allocating memory for CHSC control blocks
- Align the numbering scheme for higher-level topology structures like
socket, book, drawer with other hardware identifiers e.g. in sysfs,
procfs and tools like lscpu
* tag 's390-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/topology: Use zero-based numbering for containing entities
s390/cio: Restore GFP_DMA for CHSC allocation
s390/pai: Fix missing PAI counter increments under heavy load
s390/pai: Disable duplicate read of kernel PAI counter value
Linus Torvalds [Fri, 22 May 2026 13:23:56 +0000 (06:23 -0700)]
Merge tag 'slab-for-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix for a missing cpus_read_lock in one of the cpu sheaves
flushing paths (Qing Wang)
* tag 'slab-for-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: hold cpus_read_lock around flush_rcu_sheaves_on_cache()
Linus Torvalds [Fri, 22 May 2026 13:16:00 +0000 (06:16 -0700)]
Merge tag 'dma-mapping-7.1-2026-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two minor updates for the DMA-mapping code, mainly fixing some rare
corner cases (Petr Tesarik, Jianpeng Chang)"
* tag 'dma-mapping-7.1-2026-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: move dma_map_resource() sanity check into debug code
dma-direct: fix use of max_pfn
Linus Torvalds [Fri, 22 May 2026 13:09:58 +0000 (06:09 -0700)]
Merge tag 'trace-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Avoid NULL return from hist_field_name()
The function hist_field_name() is directly passed to a strcat() which
does not handle "NULL" characters. Return a zero length string when
size is greater than the limit.
This is used only to output already created histograms and no field
currently is greater than the limit. But it should still not return
NULL.
- Do not call map->ops->elt_free() on allocation failure
When elt_alloc() fails, it should not call the map->ops->elt_free()
function if it exists, as that function may not be able to handle the
free on allocation failures. The ->elt_free() should only be called
when elt_alloc() succeeds.
* tag 'trace-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not call map->ops->elt_free() if elt_alloc() fails
tracing: Avoid NULL return from hist_field_name() on truncation
The newly added driver requires the LED classdev support
and causes a link failure when that is disabled:
x86_64-linux-ld: vmlinux.o: in function `bitland_mifs_wmi_probe':
bitland-mifs-wmi.c:(.text+0xede02a): undefined reference to `devm_led_classdev_register_ext'
Fixes: dc1ec4fa86b2 ("platform/x86: bitland-mifs-wmi: Add new Bitland MIFS WMI driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20260519202804.1339581-1-arnd@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
device property: set fwnode->secondary to NULL in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitalized memory which likely will
be neither NULL nor IS_ERR() and so may end up being dereferenced (for
example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization.
Cc: stable <stable@kernel.org> Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://patch.msgid.link/20260506115701.23035-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zeng Heng [Thu, 21 May 2026 07:30:11 +0000 (15:30 +0800)]
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only |
Claudio Imbrenda [Tue, 19 May 2026 15:01:14 +0000 (17:01 +0200)]
KVM: s390: Properly reset zero bit in PGSTE
In case of memory pressure, it's possible that a guest page gets freed
and then almost immediately reused by the guest. If CMMA is enabled,
_essa_clear_cbrl() will discard all pages that are either unused or
zero. If a discarded page is reused before _essa_clear_cbrl() is called,
and the pgste.zero bit is not cleared, the page will be discarded
despite not being unused.
When calling _gmap_ptep_xchg(), always clear the pgste.zero bit. This
prevents the page from being accidentally discarded when not unused.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Claudio Imbrenda [Tue, 19 May 2026 15:01:13 +0000 (17:01 +0200)]
KVM: s390: vsie: Fix redundant rmap entries
The address passed to the gmap rmap was not being masked. As a
consequence several different (but functionally equivalent) rmap
entries were being created for each shadowed table.
Fix this by properly masking the address depending on the table level.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Claudio Imbrenda [Tue, 19 May 2026 15:01:12 +0000 (17:01 +0200)]
KVM: s390: vsie: Fix unshadowing logic
In some cases (i.e. under extreme memory pressure on the host),
attempting to shadow memory will result in the same memory being
unshadowed, causing a loop.
Add a PGSTE bit to distinguish between shadowed memory and shadowed DAT
tables, fix the unshadowing logic in _gmap_ptep_xchg() to prevent
unnecessary unshadowing and perform better checks.
Also fix the unshadowing logic in _gmap_crstep_xchg_atomic() which did
not unshadow properly when the large page would become unprotected.
Opportunistically add a check in gmap_protect_rmap() to make sure it
won't be called with level == TABLE_TYPE_PAGE_TABLE.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Bibo Mao [Fri, 22 May 2026 07:05:12 +0000 (15:05 +0800)]
LoongArch: KVM: Move some variable declarations to paravirt.h
Some variables relative with paravirt feature are declared in the header
file asm/qspinlock.h, however this file can be included only when option
CONFIG_SMP is on. There is compiling warnings if CONFIG_SMP is off since
variables are not declared.
Move these variable declarations to header file asm/paravirt.h to avoid
compiling warnings.
Fixes: c43dce6f13fb ("LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202605061313.O8Hswm2b-lkp@intel.com/ Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tiezhu Yang [Fri, 22 May 2026 07:05:07 +0000 (15:05 +0800)]
LoongArch: kprobes: Fix handling of fatal unrecoverable recursions
KPROBE_HIT_SS and KPROBE_REENTER are two types of fatal recursions that
can not be safely recovered in kprobes.
KPROBE_HIT_SS means that a kprobe is hit during single-stepping. At
this point, the architecture-specific single-step context is already
active. Nested single-stepping would corrupt the state, as the kprobe
control block (kcb) and hardware registers cannot safely store multiple
levels of stepping state.
KPROBE_REENTER means that a third-level recursion occurs when a probe
is hit while the system is already handling a nested probe (second-
level). The kcb only provides a single slot (prev_kprobe) to backup the
state. When a third probe is hit, there is no more space to save the
state without corrupting the first-level backup.
Kprobes work by replacing instructions with breakpoints. In order to
execute the original instruction and continue, it must be moved to a
temporary "single-step" slot. Since there is no backup space left to
set up this slot safely, the CPU would be forced to return to the same
original breakpoint address, triggering an endless loop.
Currently, the code only prints a warning and returns. This leads to
an infinite re-entry loop as the CPU repeatedly hits the same trap and
a "stuck" CPU core because preemption was disabled at the start of the
handler and never re-enabled in this early return path.
Fix the logic by:
1. Merging KPROBE_HIT_SS and KPROBE_REENTER cases, as both represent
fatal recursions that cannot be safely recovered.
2. Replacing WARN_ON_ONCE() with BUG() to terminate the system. This
aligns LoongArch with other architectures (x86, arm64, riscv) and
prevents stack overflow while providing diagnostic information.
Tiezhu Yang [Fri, 22 May 2026 07:05:07 +0000 (15:05 +0800)]
LoongArch: kprobes: Use larch_insn_text_copy() to patch instructions
On SMP systems, kprobe handlers would occasionally fail to execute on
certain CPU cores. The issue is hard to reproduce and typically occurs
randomly under high system load.
The root cause is a software-side instruction hazard. According to the
LoongArch Reference Manual, while the cache coherency is maintained by
hardware, software must explicitly use the "IBAR" instruction to ensure
the instruction fetch unit (IFU) observes the effects of recent stores.
The current arch_arm_kprobe() and arch_disarm_kprobe() only execute the
"IBAR" barrier (via flush_insn_slot -> local_flush_icache_range) on the
local CPU. This leaves a vulnerable window where remote CPU cores may
continue executing stale instructions from their pipelines or prefetch
buffers, as they have not executed an "IBAR" since the code modification.
Switch to larch_insn_text_copy() to fix this:
1. Synchronization: It uses stop_machine_cpuslocked() to synchronize all
online CPUs, ensuring no CPU is executing the target code area during
modification.
2. Visibility: By passing cpu_online_mask to stop_machine_cpuslocked(),
the callback text_copy_cb() is executed on all online cores. Each CPU
core invokes local_flush_icache_range() to execute "IBAR", clearing
instruction hazards system-wide and ensuring the "break" instruction
is visible to the fetch units of all cores.
3. Robustness: It properly manages memory write permissions (ROX/RW) for
the kernel text segment during patching, ensuring compatibility with
CONFIG_STRICT_KERNEL_RWX.
Takashi Iwai [Fri, 22 May 2026 06:25:18 +0000 (08:25 +0200)]
Merge tag 'asoc-fix-v7.1-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.1
A bigger batch of fixes than usual due to -next not happeing last week,
this is mostly stuff for laptops - a lot of quirks and small fixes,
mainly for x86 and SoundWire. Nothing too big or exciting individually,
just two week's worth.
projects / thirdparty / linux.git / log
