Linus Torvalds [Sat, 6 Jun 2026 01:02:23 +0000 (18:02 -0700)]
Merge tag 'drm-fixes-2026-06-06' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, not contributing to things settling down
unfortunately. Lots of driver fixes for various bounds checks, leaks
and UAF type things, i915/xe probably the most sane, amdgpu has a mix
of fixes all over, then ethosu has lots of small fixes.
The problem of fixing thing in private has really hit us with the
change handle ioctl, and "Sima was right" and we should have disabled
the ioctl, since it was only introduced a couple of kernels ago and
failed to upstream it's tests in time.
The patch here fixes the problems Sima identified, but disables the
ioctl as well, with a list of known problems in it and a request for
proper tests to be written and upstreamed. It's a niche user ioctl
designed for CRIU with AMD ROCm, so I think it's fine to just disable
it.
Maybe this week will settle down.
core:
- disable the gem change handle ioctl for security reasons (plan to
fix it on list later with proper test coverage)
dumb-buffer:
- remove strict limits on buffer geometry
amdkfd:
- UAF race fix
- Fix a potential NULL pointer dereference
- GC 11 buffer overflow fix for SDMA
xe:
- Revert removing support for unpublished NVL-S GuC
- Suspend fixes related to multi-queue
i915:
- Fix color blob reference handling in intel_plane_state
- Revert "drm/i915/backlight: Remove try_vesa_interface"
ethosu:
- reject unsupported NPU_OP_RESIZE
- fix index of IFM region
- fix weight index
- fix overflows in DMA-size calculations
- reject DMA commands with uninitialized length
- fix OOB write in ethosu_gem_cmdstream_copy_and_validate
imx:
- fix kernel-doc warnings
ivpu:
- add overflow checks in firmware handling and get_info_ioctl
v3d:
- wait for pending L2T flush before cleaning caches
- fix leak of vaddr
- skip CSD when it has zeroed workgroups
- fix ref counting in performance monitoring"
* tag 'drm-fixes-2026-06-06' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/gem: Try to fix change_handle ioctl, attempt 4
Revert "drm/i915/backlight: Remove try_vesa_interface"
accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate()
accel/ethosu: reject DMA commands with uninitialized length
accel/ethosu: fix arithmetic issues in dma_length()
accel/ethosu: fix wrong weight index in NPU_SET_SCALE1_LENGTH on U85
accel/ethosu: reject NPU_OP_RESIZE commands from userspace
accel/ethosu: fix IFM region index out-of-bounds in command stream parser
drm/v3d: Fix global performance monitor reference counting
drm/xe/multi_queue: skip submit when primary queue is suspended
drm/xe: Clear pending_disable before signaling suspend fence
Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend"
drm/amd/pm: smu_v14_0_0: use SoftMin for gfxclk in set_soft_freq_limited_range
drm/amdgpu: Fix incorrect VRAM GART mappings on non-4K page size systems
drm/amdgpu/userq: move wptr_obj cleanup in mqd_destroy
drm/amdgpu: improve the userq seq BO free bit lookup
drm/amdgpu/userq: remove the vital queue unmap logging
drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11
drm/amdkfd: fix NULL dereference in get_queue_ids()
drm/amdgpu: set noretry=1 as default for GFX 10.1.x (Navi10/12/14)
...
Simona Vetter [Thu, 4 Jun 2026 19:44:37 +0000 (21:44 +0200)]
drm/gem: Try to fix change_handle ioctl, attempt 4
[airlied: just added some comments on how to reenable]
On-list because the cat is out of the bag and we're clearly not good
enough to figure this out in private. The story thus far:
5e28b7b94408 ("drm: Set old handle to NULL before prime swap in
change_handle") tried to fix a race condition between the gem_close and
gem_change_handle ioctls, but got a few things wrong:
- There's a confusion with the local variable handle, which is actually
the new handle, and so the two-stage trick was actually applied to the
wrong idr slot. 7164d78559b0 ("drm/gem: fix race between
change_handle and handle_delete") tried to fix that by adding yet
another code block, but forgot to add the error handling. Which meant
we now have two paths, both kinda wrong.
- dc366607c41c ("drm: Replace old pointer to new idr") tried to apply
another fix, but inconsistently, again because of the handle confusion
- this would be the right fix (kinda, somewhat, it's a mess) if we'd
do the two-stage approach for the new handle. Except that wasn't the
intent of the original fix.
We also didn't have an igt merged for the original ioctl, which is a big
no-go. This was attempted to address off-list in the original bugfix,
and amd QA people claimed the bug was fixed now. Very clearly that's not
the case. Here's my attempt to sort this out:
- Rename the local variable to new_handle, the old aliasing with
args->handle is just too dangerously confusing.
- Merge the gem obj lookup with the two-stage idr_replace so that we
avoid getting ourselves confused there.
- This means we don't have a surplus temporary reference anymore, only
an inherited from the idr. A concurrent gem_close on the new_handle
could steal that. Fix that with the same two-stage approach
create_tail uses. This is a bit overkill as documented in the comment,
but I also don't trust my ability to understand this all correctly, so
go with the established pattern we have from other ioctls instead for
maximum paranoia.
- Adjust error paths. I've tried to make the error and success paths
common, because they are identical except for which handle is removed
and on which we call idr_replace to (re)install the object again. But
that made things messier to read, so I've left it at the more verbose
version, which unfortunately hides the symmetry in the entire code
flow a bit.
- While at it, also replace the 7 space indent with 1 tab.
And finally, because I flat out don't trust my abilities here at all
anymore:
- Disable the ioctl until we have the igt situation and everything else
sorted out on-list and with full consensus.
v2:
Sashiko noticed that I didn't handle the error path for idr_replace
correctly, it must be checked with IS_ERR_OR_NULL like in
gem_handle_delete. So yeah, definitely should just the existing paths
1:1 because this is endless amounts of tricky.
Also add the Fixes: line for the original ioctl, I forgot that too.
Reported-by: DARKNAVY (@DarkNavyOrg) <vr@darknavy.com> Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> Fixes: dc366607c41c ("drm: Replace old pointer to new idr") Cc: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Cc: Edward Adam Davis <eadavis@qq.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") Cc: David Francis <David.Francis@amd.com> Cc: Puttimet Thammasaeng <pwn8official@gmail.com> Cc: Christian Koenig <Christian.Koenig@amd.com> Fixes: 7164d78559b0 ("drm/gem: fix race between change_handle and handle_delete") Cc: Zhenghang Xiao <kipreyyy@gmail.com> Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") Reviewed-by: David Francis <David.Francis@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260604194437.1725314-1-simona.vetter@ffwll.ch
Dave Airlie [Fri, 5 Jun 2026 22:37:21 +0000 (08:37 +1000)]
Merge tag 'drm-misc-fixes-2026-06-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
dumb-buffer:
- remove strict limits on buffer geometry
ethosu:
- reject unsupported NPU_OP_RESIZE
- fix index of IFM region
- fix weight index
- fix overflows in DMA-size calculations
- reject DMA commands with uninitialized length
- fix OOB write in ethosu_gem_cmdstream_copy_and_validate
imx:
- fix kernel-doc warnings
ivpu:
- add overflow checks in firmware handling and get_info_ioctl
v3d:
- wait for pending L2T flush before cleaning caches
- fix leak of vaddr
- skip CSD when it has zeroed workgroups
- fix ref counting in performance monitoring
Linus Torvalds [Fri, 5 Jun 2026 20:52:15 +0000 (13:52 -0700)]
Merge tag 'io_uring-7.1-20260605' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"A single fix for a missing flag mask when multishot is used with
an incrementally consumed buffer ring, potentially leading to
application confusion because of lack of IORING_CQE_F_BUF_MORE
consistency"
* tag 'io_uring-7.1-20260605' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries
Linus Torvalds [Fri, 5 Jun 2026 17:38:45 +0000 (10:38 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Correctly drop the ITS translation cache reference when it actually
gets invalidated
- Take the SRCU lock for SW page table walks
- Restore POR_EL0 access to host EL0, avoiding POR_EL0 becoming
inaccessible from EL0 after running a guest
- Reassign nested_mmus array behind mmu_lock, ensuring that vcpu init
and MMU notifiers are mutually exclusive
- Correctly handle FEAT_XNX at stage-2
s390:
- More fixes for the new page table management and nested
virtualization
x86:
- More fixes for GHCB issues:
- Read start/end indices of page size change requests exactly once
per vmexit
- Unmap and unpin the GHCB as needed on vCPU free"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits)
KVM: arm64: Correctly identify executable PTEs at stage-2
KVM: arm64: nv: Fix handling of XN[0] when !FEAT_XNX
KVM: arm64: Reassign nested_mmus array behind mmu_lock
KVM: arm64: Restore POR_EL0 access to host EL0
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
KVM: arm64: vgic-its: Drop the translation cache reference only for the erased entry
KVM: SEV: Unmap and unpin the GHCB as needed on vCPU free
KVM: SEV: Decouple the need to sync the GHCB SA from the need to free the SA
KVM: SEV: Move sev_free_vcpu() down below sev_es_unmap_ghcb()
KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying
KVM: SEV: Read start/end indices of PSC requests exactly once per #VMGEXIT
KVM: SEV: Add an anonymous "psc" struct to track current PSC metadata
KVM: SEV: Make it more obvious when KVM is writing back the current PSC index
KVM: s390: Remove ptep_zap_softleaf_entry()
KVM: s390: Fix possible reference leak in fault-in code
KVM: s390: Prevent memslots outside the ASCE range
KVM: s390: Lock pte when making page secure
KVM: s390: Fix fault-in code
KVM: s390: vsie: Fix rmap handling in _do_shadow_crste()
KVM: s390: Fix guest / virtual address confusion in _essa_clear_cbrl()
...
Linus Torvalds [Fri, 5 Jun 2026 17:33:32 +0000 (10:33 -0700)]
Merge tag 'probes-fixes-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing/probes fix from Masami Hiramatsu:
"Fix the eprobe event parser to point error position correctly"
* tag 'probes-fixes-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Point the error offset correctly for eprobe argument error
Zhou Yuhang [Wed, 20 May 2026 07:08:00 +0000 (15:08 +0800)]
kconfig: Fix repeated include selftest expectation
The err_repeated_inc test was added with an expected stderr fixture
that does not match the diagnostic printed by kconfig.
Running "make testconfig" currently fails in that test even though the
parser reports the duplicated include correctly:
[stderr]
Kconfig.inc1:4: error: repeated inclusion of Kconfig.inc3
Kconfig.inc2:3: note: location of first inclusion of Kconfig.inc3
The fixture expects "Repeated" and "Location" with capital letters, but
the diagnostic emitted by scripts/kconfig/util.c uses lowercase words.
Update the fixture to match the real message.
Fixes: 102d712ded3e ("kconfig: Error out on duplicated kconfig inclusion") Signed-off-by: Zhou Yuhang <zhouyuhang@kylinos.cn> Tested-by: Nicolas Schier <nsc@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20260520070800.2265479-1-zhouyuhang1010@163.com Signed-off-by: Nicolas Schier <nsc@kernel.org>
Linus Torvalds [Fri, 5 Jun 2026 15:34:32 +0000 (08:34 -0700)]
Merge tag 'xfs-fixes-7.1-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"A collection of fixes mostly for the RT device, including a small
refactor that has no functional change"
* tag 'xfs-fixes-7.1-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Remove mention of PageWriteback
xfs: abort mount if xfs_fs_reserve_ag_blocks fails
xfs: factor rtgroup geom write pointer reporting into a helper
xfs: drop the RTG reference later in xfs_ioc_rtgroup_geometry
xfs: fix rtgroup cleanup in CoW fork repair
xfs: fix error returns in CoW fork repair
xfs: fix overlapping extents returned for pNFS LAYOUTGET
xfs: fix use of uninitialized imap in xfs_fs_map_blocks error path
xfs: handle racing deletions in xfs_zone_gc_iter_irec
Linus Torvalds [Fri, 5 Jun 2026 15:28:10 +0000 (08:28 -0700)]
Merge tag 'erofs-for-7.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix a UAF of sbi->sync_decompress when compressed I/Os
race with unmount
- Fix a regression introduced this development cycle that
incorrectly rejects multiple-algorithm images
* tag 'erofs-for-7.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix EFSCORRUPTED on multi-algorithm images in z_erofs_map_sanity_check()
erofs: fix use-after-free on sbi->sync_decompress
Linus Torvalds [Fri, 5 Jun 2026 15:23:02 +0000 (08:23 -0700)]
Merge tag 'v7.1-rc7-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix use after free in SMB2_CANCEL
- Fix race in ksmbd_reopen_durable_fd
- Fix oplock and lease break potential NULL-dref
* tag 'v7.1-rc7-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL
ksmbd: fix durable reconnect double-bind race in ksmbd_reopen_durable_fd
ksmbd: fix NULL-deref of opinfo->conn in oplock/lease break notifiers
Oliver Upton [Tue, 2 Jun 2026 16:59:01 +0000 (09:59 -0700)]
KVM: arm64: Correctly identify executable PTEs at stage-2
KVM invalidates the I-cache before installing an executable PTE on
implementations without DIC. Unfortunately, support for FEAT_XNX
broke this check as KVM_PTE_LEAF_ATTR_HI_S2_XN was expanded to a
bitfield.
Fix it by reusing kvm_pgtable_stage2_pte_prot() and testing the abstract
permission bits instead.
Fixes: 2608563b466b ("KVM: arm64: Add support for FEAT_XNX stage-2 permissions") Reported-by: Sashiko (gemini/gemini-3.1-pro-preview) Signed-off-by: Oliver Upton <oupton@kernel.org> Reviewed-by: Wei-Lin Chang <weilin.chang@arm.com> Link: https://patch.msgid.link/20260602165901.52800-3-oupton@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org
Oliver Upton [Tue, 2 Jun 2026 16:59:00 +0000 (09:59 -0700)]
KVM: arm64: nv: Fix handling of XN[0] when !FEAT_XNX
XN has already been extracted from its bitfield position so using
FIELD_PREP() on the mask that clears XN[0] is completely broken, having
the effect of unconditionally granting execute permissions...
Fix the obvious mistake by manipulating the right bit.
Cc: stable@vger.kernel.org Fixes: d93febe2ed2e ("KVM: arm64: nv: Forward FEAT_XNX permissions to the shadow stage-2") Reviewed-by: Wei-Lin Chang <weilin.chang@arm.com> Signed-off-by: Oliver Upton <oupton@kernel.org> Link: https://patch.msgid.link/20260602165901.52800-2-oupton@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
Clément Léger [Thu, 4 Jun 2026 16:07:13 +0000 (09:07 -0700)]
io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries
When a bundle recv retries inside io_recv_finish(), the merge logic OR
the saved cflags from the previous iteration with the cflags returned by
the new iteration:
cflags = req->cqe.flags | (cflags & CQE_F_MASK);
Bits listed in CQE_F_MASK are inherited from the new iteration, and all
other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the
saved cflags. Before this change CQE_F_MASK covered only
IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE.
When using provided buffer rings (IOU_PBUF_RING_INC) with incremental
mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring
entry partially consumed, __io_put_kbufs() then sets
IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the
buffer ID will be reused for subsequent completions.
Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above
silently dropped it whenever the final retry iteration partially
consumed the buffer, and the subsequent req->cqe.flags = cflags &
~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the
carried-over cflags had one been present. Userspace would then
wrongfully advance it ring head past an entry the kernel still uses.
Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the
new iteration into the user-visible CQE and stripped from the saved
cflags between iterations.
kvm->arch.nested_mmus[] is walked under kvm->mmu_lock, including from the
MMU notifier path (kvm_unmap_gfn_range() -> kvm_nested_s2_unmap()), which
can run at any time. kvm_vcpu_init_nested() reallocates the array and frees
the old buffer while holding only kvm->arch.config_lock, so such a walker
can reference the freed array.
Allocate the new array outside of mmu_lock, as the allocation can sleep.
Under the lock, copy the existing entries, fix up the back pointers and
reassign the array. Free the old buffer after dropping the lock, as
kvfree() can sleep as well.
Fixes: 4f128f8e1aaac ("KVM: arm64: nv: Support multiple nested Stage-2 mmu structures") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Oliver Upton <oupton@kernel.org> Link: https://patch.msgid.link/aiKIVVeIr1aAB1yp@v4bel Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger,kernel.org
Joey Gouly [Thu, 4 Jun 2026 10:54:34 +0000 (11:54 +0100)]
KVM: arm64: Restore POR_EL0 access to host EL0
CPTR_EL2.E0POE was being cleared in __deactivate_cptr_traps_vhe(), which meant
that any accesses to POR_EL0 from host EL0 would trap and be reported to
userspace as an Illegal instruction. This would happen after running any VM,
regardless if it used POE or not.
Removing the try_vesa_interface gate caused a backlight regression on
panels whose VBT correctly reports INTEL_BACKLIGHT_DISPLAY_DDI and whose
PWM path is the actual backlight control, but whose DPCD optimistically
advertises DP_EDP_BACKLIGHT_AUX_ENABLE_CAP / _BRIGHTNESS_AUX_SET_CAP.
After the commit such panels silently bind to the VESA AUX backlight
funcs; AUX writes complete but the panel ignores them, leaving
brightness stuck (no-op backlight). Observed on at least KBL and TGL
eDP setups.
Hyunwoo Kim [Wed, 3 Jun 2026 12:09:33 +0000 (21:09 +0900)]
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
walk_s1() and kvm_walk_nested_s2() expect to be called while holding
kvm->srcu to guard against memslot changes. While this is generally
the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the
respective walkers without taking kvm->srcu.
Fix by acquiring kvm->srcu prior to the table walk in both instances.
Cc: stable@vger.kernel.org Fixes: 50f77dc87f13 ("KVM: arm64: Populate level on S1PTW SEA injection") Fixes: be04cebf3e78 ("KVM: arm64: nv: Add emulation of AT S12E{0,1}{R,W}") Suggested-by: Oliver Upton <oupton@kernel.org> Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Oliver Upton <oupton@kernel.org> Link: https://patch.msgid.link/aiAZfdeyanIvP8SD@v4bel Signed-off-by: Marc Zyngier <maz@kernel.org>
Hyunwoo Kim [Mon, 1 Jun 2026 14:53:26 +0000 (23:53 +0900)]
KVM: arm64: vgic-its: Drop the translation cache reference only for the erased entry
vgic_its_invalidate_cache() walks the per-ITS translation cache with
xa_for_each() and drops the cache's reference on each entry with
vgic_put_irq(). It puts the iterated pointer, though, rather than the
value returned by xa_erase().
The function is called from contexts that do not exclude one another: the
ITS command handlers hold its_lock, the GITS_CTLR write path holds
cmd_lock, and the path that clears EnableLPIs in a redistributor's
GICR_CTLR holds neither. Two or more of them can drain the same cache
concurrently, and if each one observes the same entry, erases it and then
puts it, the single reference the cache holds on that entry is dropped
more than once. The entry can then be freed while an ITE still maps it.
xa_erase() is atomic and returns the previous entry, so put only the entry
that this context actually removed. The cache reference is then dropped
exactly once per entry even when the invalidations run concurrently, and
the behavior is unchanged when only one context runs.
Fixes: 8201d1028caa ("KVM: arm64: vgic-its: Maintain a translation cache per ITS") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Oliver Upton <oupton@kernel.org> Link: https://patch.msgid.link/ah2c5lu4JbUg7dj-@v4bel Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org
Muhammad Bilal [Sat, 23 May 2026 19:08:43 +0000 (19:08 +0000)]
accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate()
The command stream parsing loop increments the index variable a second
time when a 64-bit command word is encountered (bit 14 set), but does
not re-check the loop bound before writing the second word:
for (i = 0; i < size / 4; i++) {
bocmds[i] = cmds[0];
if (cmd & 0x4000) {
i++;
bocmds[i] = cmds[1]; /* unchecked */
}
}
The buffer bocmds is backed by a DMA allocation of exactly size bytes
from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1].
When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is
set, bocmds[size/4-1] is written in bounds, i is then incremented to
size/4, and bocmds[size/4] writes four bytes past the end of the
allocation.
Userspace controls both the buffer contents and the size argument via
the ioctl, making this a userspace-triggerable heap out-of-bounds write.
Fix by checking the incremented index against the buffer bound before
the second write and returning -EINVAL if the buffer is too small to
contain the extended command.
Muhammad Bilal [Sun, 24 May 2026 13:03:19 +0000 (13:03 +0000)]
accel/ethosu: reject DMA commands with uninitialized length
cmd_state_init() initializes the command state with memset(0xff),
leaving dma->len at U64_MAX to signal missing setup. The only setter
is NPU_SET_DMA0_LEN; if userspace omits this command and issues
NPU_OP_DMA_START, dma->len remains U64_MAX.
In dma_length(), a positive stride added to U64_MAX wraps to a small
value. With size0 == 1, check_mul_overflow() does not trigger and
dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check
then passes, region_size[] stays 0, and the bounds check in
ethosu_job.c is bypassed, allowing hardware to execute DMA with stale
physical addresses.
Fix by checking for U64_MAX at the start of dma_length() before any
arithmetic, consistent with the sentinel value used throughout the
driver to detect uninitialized fields.
Muhammad Bilal [Sun, 24 May 2026 10:37:10 +0000 (10:37 +0000)]
accel/ethosu: fix arithmetic issues in dma_length()
dma_length() derives DMA region usage from command stream values and
updates region_size[]:
len = ((len + stride[0]) * size0 + stride[1]) * size1
region_size[region] = max(..., len + dma->offset)
Several arithmetic issues can corrupt the derived region size:
- signed stride values may underflow when added to len
- intermediate multiplications may overflow
- len + dma->offset may overflow during region_size updates
- dma_length() error returns were not validated by the caller
region_size[] is later used by ethosu_job.c to validate command stream
accesses against GEM buffer sizes. Arithmetic wraparound can therefore
under-report region usage and bypass the bounds validation.
Fix by validating signed additions, using overflow helpers for
multiplications and offset updates, and propagating dma_length()
failures to the caller.
Muhammad Bilal [Sat, 23 May 2026 21:07:53 +0000 (21:07 +0000)]
accel/ethosu: fix wrong weight index in NPU_SET_SCALE1_LENGTH on U85
On non-U65 hardware (e.g. U85), opcode 0x4093 is NPU_SET_WEIGHT2_LENGTH.
The BASE handler for the same opcode correctly assigns to
st.weight[2].base, but the LENGTH handler mistakenly assigns cmds[1]
to st.weight[1].length instead of st.weight[2].length.
This leaves weight[2].length at its initialised sentinel value of
0xffffffff and corrupts weight[1].length with the user-supplied value,
breaking the software bounds-check state for both weight buffers on U85.
Muhammad Bilal [Sat, 23 May 2026 21:07:52 +0000 (21:07 +0000)]
accel/ethosu: reject NPU_OP_RESIZE commands from userspace
NPU_OP_RESIZE is a U85-only command that the driver does not yet
implement. The existing WARN_ON(1) placeholder fires unconditionally
whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE,
causing unbounded kernel log spam.
If panic_on_warn is set the kernel panics, giving any unprivileged user
with access to the DRM device a trivial denial-of-service primitive.
Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl
rejects the command before it reaches hardware.
Muhammad Bilal [Sat, 23 May 2026 19:51:59 +0000 (19:51 +0000)]
accel/ethosu: fix IFM region index out-of-bounds in command stream parser
NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving
a maximum value of 127. However region_size[] and output_region[] in
struct ethosu_validated_cmdstream_info are both sized to
NPU_BASEP_REGION_MAX (8), giving valid indices [0..7].
Every other region assignment in the same switch uses param & 0x7:
NPU_SET_OFM_REGION: st.ofm.region = param & 0x7;
NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7;
NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7;
NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7;
The 0x7f mask on IFM is inconsistent and appears to be a typo.
feat_matrix_length() and calc_sizes() use the region index directly
as an array subscript into the kzalloc'd info struct:
info->region_size[fm->region] = max(...);
A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes
a write up to 127*8 = 1016 bytes past the start of region_size[],
corrupting adjacent kernel heap data.
Fix by applying the same & 0x7 mask used by all other region
assignments.
Linus Torvalds [Thu, 4 Jun 2026 21:35:55 +0000 (14:35 -0700)]
Merge tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
Linus Torvalds [Thu, 4 Jun 2026 20:38:42 +0000 (13:38 -0700)]
Merge tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- Fix CFI violation in probestub function
The probestub is a function to allow tprobes to hook to a tracepoint
to gain access to its parameters.
The function itself is only referenced by the tracepoint structure
which lives in the __tracepoint section. objtool explicitly ignores
that section and when processing functions in the kernel, if it
detects one that has no references it will seal it to have its ENDBR
stripped on boot up.
This means the probstub function will have its ENDBR stripped and if
a tprobe is attached to it with IBT enabled, it will go *boom*.
* tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix CFI violation in probestub being called by tprobes
Linus Torvalds [Thu, 4 Jun 2026 19:31:20 +0000 (12:31 -0700)]
Merge tag 's390-7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Enable IOMMUFD and VFIO cdev such that PCI pass-through to
QEMU/KVM can optionally utilize native IOMMUFD
- With HAVE_ARCH_BUG_FORMAT enabled the BUG infrastructure might
misinterpret flags or fault. Fix this by moving the "format"
field emission into __BUG_ENTRY()
- The generic version of _THIS_IP_ is known to be brittle and may
break with current and future GCC and Clang optimizations. Fix
it by overriding _THIS_IP_
* tag 's390-7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Implement _THIS_IP_ using inline asm
s390/bug: Always emit format word in __BUG_ENTRY
s390/configs: Enable IOMMUFD and VFIO cdev in defconfigs
Breno reports a lockdep warning in bnxt. During FW reset the driver
may end up calling netif_set_real_num_tx_queues() (if queue count
changes), so calls to bnxt_open() still require rtnl_lock.
Sechang Lim [Wed, 3 Jun 2026 16:27:33 +0000 (16:27 +0000)]
udp: clear skb->dev before running a sockmap verdict
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above.
Fixes: 965b57b469a5 ("net: Introduce a new proto_ops ->read_skb()") Cc: stable@vger.kernel.org Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260603162737.697215-1-rhkrqnwk98@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Wed, 3 Jun 2026 18:11:44 +0000 (14:11 -0400)]
sctp: purge outqueue on stale COOKIE-ECHO handling
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths.
Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Reported-by: Yuqi Xu <xuyq21@lenovo.com> Reported-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/94318159b9052907a6cbb7256aee8b5f8dfbfccb.1780510304.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These fields are updated asynchronously by the bonding state machine
in ad_churn_machine() while holding bond->mode_lock.
bond_info_show_slave() and bond_fill_slave_info() read them without
bond->mode_lock being held, we need to add READ_ONCE() and
WRITE_ONCE() annotations.
Note that AD_CHURN_MONITOR, AD_CHURN, and AD_NO_CHURN are defined
exclusively in (kernel private) include/net/bond_3ad.h header.
They should be moved to include/uapi/linux/if_bonding.h or userspace
tools will have to hardcode their values.
Fixes: 4916f2e2f3fc ("bonding: print churn state via netlink") Fixes: 14c9551a32eb ("bonding: Implement port churn-machine (AD standard 43.4.17).") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260603123514.388226-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yizhou Zhao [Wed, 3 Jun 2026 06:00:13 +0000 (14:00 +0800)]
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
In mrp_pdu_parse_vecattr(), vector attribute events are encoded three
per byte and valen tracks the number of events left to process.
The parser decrements valen after processing the first and second events
from each event byte, but not after processing the third one. When valen
is exactly a multiple of three, the loop continues after the last valid
event and consumes the next byte as a new event byte, applying a
spurious event to the MRP applicant state.
Additionally, when valen is zero the parser unconditionally consumes
attrlen bytes as FirstValue and advances the offset, even though per
IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of
zero and no FirstValue or Vector fields. This corrupts the offset for
subsequent PDU parsing.
Also, when valen exceeds three the loop crosses byte boundaries but
the attribute value is not incremented between the last event of one
byte and the first event of the next. This causes the first event of
the next byte to use the same attribute value as the third event
rather than the next consecutive value.
Decrement valen after processing the third event, skip FirstValue
consumption when valen is zero, and increment the attribute value at
the end of each loop iteration.
Fixes: febf018d2234 ("net/802: Implement Multiple Registration Protocol (MRP)") Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Link: https://patch.msgid.link/20260603060016.21522-1-zhaoyz24@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Lai [Wed, 3 Jun 2026 06:18:16 +0000 (14:18 +0800)]
rtase: Avoid sleeping in get_stats64()
The .ndo_get_stats64 callback must not sleep because it can be
called when reading /proc/net/dev.
rtase_get_stats64() calls rtase_dump_tally_counter(), which polls
the tally counter dump bit with read_poll_timeout(). This may
sleep while waiting for the hardware counter dump to complete.
Use read_poll_timeout_atomic() instead to avoid sleeping in the
get_stats64() path.
Eric Dumazet [Wed, 3 Jun 2026 07:29:55 +0000 (07:29 +0000)]
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
The aoe driver (or similar) generates a non-IPv6 packet
(e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit()
on a 6LoWPAN interface (configured by the user or test case).
Since the packet is not IPv6, the 6LoWPAN header_ops->create function
(lowpan_header_create or header_create) returns early without initializing
the lowpan_addr_info structure in the skb headroom.
In the transmit function (lowpan_xmit), the driver calls lowpan_header
(or setup_header) which unconditionally copies and uses the lowpan_addr_info
from the headroom, which contains uninitialized data.
Fix this by dropping non IPv6 packets.
A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit().
Ido Schimmel [Wed, 3 Jun 2026 10:18:11 +0000 (13:18 +0300)]
ipv6: mcast: Fix use-after-free when processing MLD queries
When processing an MLD query, a pointer to the multicast group address
is retrieved when initially parsing the packet. This pointer is later
dereferenced without being reloaded despite the fact that the skb header
might have been reallocated following the pskb_may_pull() calls, leading
to a use-after-free [1].
Fix by copying the multicast group address when the packet is initially
parsed.
[1]
BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)
Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118
When a vxlan device has vnifilter enabled, userspace observers
(e.g., bridge monitor vni) miss VNI add events and see spurious
notifications on no-op VNI re-adds.
Patch 1 fixes the missing notification on VNI add: vxlan_vni_add()
guarded the notification on a 'changed' flag that vxlan_vni_update_group()
only sets when a multicast group or remote is supplied, so VNIs added
without a group (e.g., L3 VXLAN) were silently created.
Patch 2 fixes the spurious notification on VNI update: vxlan_vni_update()
tested 'if (changed)' against a bool pointer instead of dereferencing it,
so every re-add produced a notification regardless of whether anything
actually changed.
Patch 3 adds a selftest covering both bugs along with a few related
cases (add with remote, remote update, delete-nonexistent).
====================
Andy Roulin [Tue, 2 Jun 2026 18:51:38 +0000 (11:51 -0700)]
selftests: net: add vxlan vnifilter notification test
Add a selftest for VXLAN vnifilter netlink notifications that verifies
RTM_NEWTUNNEL and RTM_DELTUNNEL are sent correctly when VNIs are added,
deleted, or updated, and that no spurious notifications are sent when
a VNI is re-added with the same attributes.
Andy Roulin [Tue, 2 Jun 2026 18:51:37 +0000 (11:51 -0700)]
vxlan: vnifilter: fix spurious notification on VNI update
When a VNI is re-added with the same attributes (e.g. same group or no
group), vxlan_vni_update() sends a spurious RTM_NEWTUNNEL notification
even though nothing changed.
The bug is that 'if (changed)' tests whether the pointer is non-NULL,
not the bool value it points to. Since every caller passes a valid
pointer, the condition is always true and the notification fires
unconditionally.
Fix by dereferencing the pointer: 'if (*changed)'.
Reproducer:
# ip link add vxlan100 type vxlan dstport 4789 local 10.0.0.1 \
nolearning external vnifilter
# ip link set vxlan100 up
# bridge monitor vni &
# bridge vni add vni 1000 dev vxlan100
# bridge vni add vni 1000 dev vxlan100 # spurious notification
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Signed-off-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20260602185138.253265-3-aroulin@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andy Roulin [Tue, 2 Jun 2026 18:51:36 +0000 (11:51 -0700)]
vxlan: vnifilter: send notification on VNI add
When a new VNI is added to a vxlan device with vnifilter enabled,
no RTM_NEWTUNNEL notification is sent to userspace. This means
'bridge monitor vni' never shows VNI add events, even though
VNI delete events are reported correctly.
The bug is in vxlan_vni_add(), where the notification is guarded by
'if (changed)'. The 'changed' flag is set by vxlan_vni_update_group()
only when the multicast group or remote IP is modified, but for a
new VNI added without a group (e.g. in L3 VxLAN interface scenarios),
the function returns early without setting changed=true. Since this
is a new VNI, the notification should be sent unconditionally.
The notification is not guarded by the return value of
vxlan_vni_update_group() because, at this point, the VNI has already
been inserted into the hash table and list with no rollback on error.
The VNI will be visible in 'bridge vni show' regardless, so userspace
should be informed. This is consistent with vxlan_vni_del() which also
notifies unconditionally.
The 'if (changed)' guard remains correct in vxlan_vni_update(), which
handles the case where a VNI already exists and is being re-added --
there, we only want to notify if the group/remote actually changed.
Reproducer:
# ip link add vxlan100 type vxlan dstport 4789 local 10.0.0.1 \
nolearning external vnifilter
# ip link set vxlan100 up
# bridge monitor vni &
# bridge vni add vni 1000 dev vxlan100 # no notification
# bridge vni delete vni 1000 dev vxlan100 # notification received
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Reported-by: Chirag Shah <chirag@nvidia.com> Signed-off-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20260602185138.253265-2-aroulin@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
Use the CPT-aware NIX channel mask in the npc_install_flow path so that
when the host PF installs steering rules in kernel for a VF used from
userspace (e.g. DPDK), MCAM entries see the same channel mask semantics as
other RX paths.
Fixes: 56bcef528bd8 ("octeontx2-af: Use npc_install_flow API for promisc and broadcast entries") Cc: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Link: https://patch.msgid.link/20260602045853.1558530-1-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Tue, 2 Jun 2026 01:06:06 +0000 (21:06 -0400)]
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
When a listening SCTP server processes a COOKIE_ECHO chunk, the cached
peer INIT chunk embedded after the cookie is parsed and its parameters
are later walked by sctp_process_init() using sctp_walk_params().
However, the chunk header length of this cached INIT chunk was not
validated against the remaining buffer in the COOKIE_ECHO payload. If
the length field is inflated, the parameter walk can run beyond the
actual received data, leading to out-of-bounds reads and potential
memory corruption during later parameter handling (e.g. STATE_COOKIE
processing and kmemdup() copies).
Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT
chunk length does not exceed the available data in the COOKIE_ECHO
buffer before it is used.
Rajat Gupta [Sun, 31 May 2026 12:32:21 +0000 (08:32 -0400)]
net/sched: fix pedit partial COW leading to page cache corruption
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable") Reported-by: Yiming Qian <yimingqian591@gmail.com> Reported-by: Keenan Dong <keenanat2000@gmail.com> Reported-by: Han Guidong <2045gemini@gmail.com> Reported-by: Zhang Cen <rollkingzzc@gmail.com> Reviewed-by: Han Guidong <2045gemini@gmail.com> Tested-by: Han Guidong <2045gemini@gmail.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Tested-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com> Link: https://patch.msgid.link/20260531123221.48732-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maíra Canal [Sun, 31 May 2026 20:18:55 +0000 (17:18 -0300)]
drm/v3d: Fix global performance monitor reference counting
In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on
the perfmon it returns, but v3d_perfmon_set_global_ioctl() and
v3d_perfmon_delete() fail to release that reference on several paths:
1. v3d_perfmon_set_global_ioctl() leaks the reference on its error
paths.
2. CLEAR_GLOBAL leaks both the find reference and the reference
previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl
that configured it.
3. Destroying a perfmon that is the current global perfmon leaks the
reference stashed by the SET_GLOBAL ioctl.
drm/xe: Clear pending_disable before signaling suspend fence
In the schedule-disable done path for suspend, we
signal the suspend fence before clearing pending_disable.
That wakeup can let suspend_wait complete and resume be queued
immediately. The resume path may then reach enable_scheduling()
while pending_disable is still set and hit the
!exec_queue_pending_disable(q) assertion.
Fix this by clearing pending_disable before signaling
the suspend fence, so any resumed transition observes a
consistent state.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
Fixes: 8533051ce920 ("drm/xe: Skip exec queue schedule toggle if queue is idle during suspend") Cc: stable@vger.kernel.org # v7.0+ Suggested-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patch.msgid.link/20260603065217.3131066-2-tilak.tirumalesh.tangudu@intel.com
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Raf Dickson [Tue, 26 May 2026 10:43:56 +0000 (10:43 +0000)]
vsock/vmci: fix sk_ack_backlog leak on failed handshake
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path.
ZhaoJinming [Mon, 1 Jun 2026 08:56:49 +0000 (16:56 +0800)]
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check.
Eva Kurchatova [Wed, 3 Jun 2026 15:31:42 +0000 (18:31 +0300)]
tracing: Fix CFI violation in probestub being called by tprobes
The probestub is a function to allow tprobes to hook to a tracepoint to
gain access to its parameters. The function itself is only referenced by
the tracepoint structure which lives in the __tracepoint section. objtool
explicitly ignores that section and when processing functions in the
kernel, if it detects one that has no references it will seal it to have
its ENDBR stripped on boot up.
This means when a tprobe is attached to the sched_wakeup tracepoint, when it
is triggered it will call __probestub_sched_wakeup and due to the missing
ENDBR on a CFI-enabled machine it will take a #CP exception.
Fix this by adding CFI_NOSEAL annotation to probestub declaration.
Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://patch.msgid.link/20260603153147.573589-1-eva.kurchatova@virtuozzo.com Fixes: d5173f753750 ("objtool: Exclude __tracepoints data from ENDBR checks") Signed-off-by: Eva Kurchatova <eva.kurchatova@virtuozzo.com>
[ Updated change log ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Antoine Tenart [Fri, 29 May 2026 14:47:00 +0000 (16:47 +0200)]
geneve: fix length used in GRO hint UDP checksum adjustment
In geneve_post_decap_hint the length used for adjusting the UDP checksum
should be 'skb->len - gro_hint->nested_tp_offset' (UDP length) instead
of 'skb->len - gro_hint->nested_nh_offset' (IP length).
Fixes: fd0dd796576e ("geneve: use GRO hint option in the RX path") Cc: Paolo Abeni <pabeni@redhat.com> Reported-by: Sashiko <sashiko-bot@kernel.org> Closes: https://sashiko.dev/#/patchset/20260521131436.748832-1-jhs%40mojatatu.com Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260529144713.780938-1-atenart@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
Fix use-after-free in metadata dst teardown in airoha_eth and mtk_eth_soc drivers
airoha_metadata_dst_free() and mtk_free_dev() call metadata_dst_free()
which frees the metadata_dst with kfree() immediately, bypassing the RCU
grace period.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path and runs call_rcu_hurry() if refcount goes to
zero.
====================
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst
with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, a use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed.
net: airoha: Fix use-after-free in metadata dst teardown
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed.
Jakub Kicinski [Thu, 4 Jun 2026 02:07:46 +0000 (19:07 -0700)]
Merge tag 'for-net-2026-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: fix memory leak in error path of hci_alloc_dev()
- hci_sync: reject oversized Broadcast Announcement prepend
- MGMT: Fix backward compatibility with userspace
- MGMT: validate advertising TLV before type checks
- L2CAP: reject BR/EDR signaling packets over MTUsig
- RFCOMM: validate skb length in MCC handlers
- RFCOMM: hold listener socket in rfcomm_connect_ind()
- ISO: Fix not releasing hdev reference on iso_conn_big_sync
- ISO: Fix a use-after-free of the hci_conn pointer
- ISO: Fix data-race on iso_pi fields in hci_get_route calls
- SCO: Fix data-race on sco_pi fields in sco_connect
- BNEP: reject short frames before parsing
* tag 'for-net-2026-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix backward compatibility with userspace
Bluetooth: SCO: Fix data-race on sco_pi fields in sco_connect
Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls
Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer
Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Bluetooth: bnep: reject short frames before parsing
Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
Bluetooth: RFCOMM: validate skb length in MCC handlers
Bluetooth: MGMT: validate advertising TLV before type checks
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
====================
Jakub Kicinski [Thu, 4 Jun 2026 02:07:34 +0000 (19:07 -0700)]
Merge tag 'wireless-2026-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Things are finally quieting down:
- iwlwifi:
- FW reset handshake removal for older devices
- NIC access fix in fast resume
- avoid too large command for some BIOSes
- fix TX power constraints in AP mode
- cfg80211:
- fix netlink parse overflow
- fix potential 6 GHz scan memory leak
- enforce HE/EHT consistency to avoid mac80211 crash
- mac80211: guard radiotap antenna parsing
* tag 'wireless-2026-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: enforce HE/EHT cap/oper consistency
wifi: fix leak if split 6 GHz scanning fails
wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap
wifi: nl80211: reject oversized EMA RNR lists
wifi: iwlwifi: pcie: simplify the resume flow if fast resume is not used
wifi: iwlwifi: mvm: avoid oversized UATS command copy
wifi: iwlwifi: mld: send tx power constraints before link activation
wifi: iwlwifi: mvm: don't support the reset handshake for old firmwares
====================
Jakub Kicinski [Thu, 4 Jun 2026 02:04:46 +0000 (19:04 -0700)]
Merge branch 'mptcp-misc-fixes-for-v7-1-rc7'
Matthieu Baerts says:
====================
mptcp: misc fixes for v7.1-rc7
Here are various unrelated fixes:
- Patch 1: fix missing wakeups when multiple threads are reading from
the same fd. A fix for v5.7.
- Patch 2: fix retransmission loop when MPTCP checksum is enabled. A fix
for v5.14.
- Patch 3: fix a TOCTOU race while computing rcv_wnd. A fix for v5.11.
- Patch 4: allow subflows receive window to shrink if needed. A fix for
v5.19.
- Patches 5-6: avoid 'extra_subflows' to underflow with the userspace
PM. A fix for v5.19.
- Patch 7: report errors if one subflow cannot set SO_TIMESTAMPING. A
fix for v5.14.
- Patch 8: try to set TCP_MAXSEG on all subflows, before reporting
errors, if any. A fix for v6.17.
- Patch 9: check desc->count in read_sock, to act as expected. A fix
for v7.0.
- Patch 10: fix an uninit value in mptcp_established_options, reported
by syzbot. A fix for v7.1-rc1.
- Patch 11: fix a similar issue than the previous patch, exposed by the
same modification from v7.1-rc1, but was already causing issues since
v5.15.
====================
When an ADD_ADDR needs to be sent, it could be prepared if there is
enough remaining space and even if the packet is not a pure ACK. But it
would be dropped soon after.
Indeed, in mptcp_pm_add_addr_signal(), there is enough space to fit a
DSS of 20 octets and an ADD_ADDR echo containing an IPv4 address on 8
octets for example. In this case, the packet would be prepared, the
MPTCP_ADD_ADDR_ECHO bit would be removed from pm->addr_signal, but the
option would be silently dropped in mptcp_established_options_add_addr()
not to override DSS info in the union from 'struct mptcp_out_options',
and also because mptcp_write_options() will enforce mutually exclusion
with DSS.
Instead, don't even try to send an ADD_ADDR if it is not a pure ACK.
Retry for each new packet until a pure-ACK is emitted. That's fine to do
that, because each time an ADD_ADDR (echo) is scheduled, a pure ACK is
queued.
This also simplifies the code, and the skb checks can be done earlier,
before the lock.
Note: also, since commit 6d0060f600ad ("mptcp: Write MPTCP DSS headers
to outgoing data packets"), opts->ahmac would not have been set to 0
when other suboptions were not dropped, and when sending an ADD_ADDR
echo. That would have resulted in sending an ADD_ADDR using garbage
info, where there was not enough space, instead of an echo one without
the ADD_ADDR HMAC.
Local variable opts created at:
__tcp_transmit_skb+0x4d/0x5fe0 net/ipv4/tcp_output.c:1536
__tcp_send_ack+0x967/0xad0 net/ipv4/tcp_output.c:4499
The output path currently omits initializing the mptcp extension
`use_map` flag in a few corner cases.
Address the issue always zeroing all the extensions flags before
eventually initializing the individual bits. To that extent, introduce
and use a struct_group to avoid multiple bitwise operations.
Gang Yan [Tue, 2 Jun 2026 12:14:16 +0000 (22:14 +1000)]
mptcp: check desc->count in read_sock
__tcp_read_sock() checks desc->count after each skb is consumed and
breaks the loop when it reaches 0. The MPTCP variant lacks this check.
This is a functional bug, other subsystems also rely on this check:
TLS strparser sets desc->count to 0 once a full TLS record is assembled
and depends on this break to stop reading.
Add the same desc->count check to __mptcp_read_sock(), mirroring
__tcp_read_sock().
The mptcp_setsockopt_all_sf(), currently used only with TCP_MAXSEG,
stopped when one subflow returned an error.
Even if it is not wrong, this is different from the other helpers trying
to set the option on all subflows, and then returning an error if at
least one of them had an issue.
Follow this behaviour, for a question of uniformity.
sock_set_timestamping() can fail for different reasons. The returned
value should then be checked.
If sock_set_timestamping() fails for at least one subflow, the first
error is now reported to the userspace, similar to what is done with
other socket options.
Fixes: 9061f24bf82e ("mptcp: sockopt: propagate timestamp request to subflows") Cc: stable@vger.kernel.org Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Closes: https://lore.kernel.org/willemdebruijn.kernel.178a41a53d041@gmail.com Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-7-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tao Cui [Tue, 2 Jun 2026 12:14:13 +0000 (22:14 +1000)]
selftests: mptcp: add test for extra_subflows underflow on userspace PM
Add a test to verify that when userspace PM fails to create a subflow
(e.g. using an unreachable address), the extra_subflows counter is not
decremented below zero.
Fixes: 77e4b94a3de6 ("mptcp: update userspace pm infos") Cc: stable@vger.kernel.org Signed-off-by: Tao Cui <cuitao@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-6-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tao Cui [Tue, 2 Jun 2026 12:14:12 +0000 (22:14 +1000)]
mptcp: pm: fix extra_subflows underflow on userspace PM subflow creation
The userspace PM increments extra_subflows after __mptcp_subflow_connect()
succeeds, but __mptcp_subflow_connect() calls mptcp_pm_close_subflow()
on failure to roll back the pre-increment done by the kernel PM's fill_*()
helpers. Because the userspace PM hasn't incremented yet at that point,
this decrement is spurious and causes extra_subflows to underflow.
Fix it by aligning the userspace PM with the kernel PM: increment
extra_subflows before calling __mptcp_subflow_connect(), so the existing
error path in subflow.c correctly rolls it back on failure. Also simplify
the error handling by taking pm.lock only when needed for cleanup.
Fixes: 77e4b94a3de6 ("mptcp: update userspace pm infos") Cc: stable@vger.kernel.org Signed-off-by: Tao Cui <cuitao@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-5-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 2 Jun 2026 12:14:11 +0000 (22:14 +1000)]
mptcp: allow subflow rcv wnd to shrink
In MPTCP connection, the `window` field in the TCP header refers to the
MPTCP-level rcv_nxt and it's right edge should not move backward. Such
constraint is enforced at DSS option generation time.
At the same time, the TCP stack ensures independently that the TCP-level
rcv wnd right's edge does not move backward. That in turn causes artificial
inflating of the MPTCP rcv window when the incoming data is acked at the
TCP level and is OoO in the MPTCP sequence space (or lands in the backlog).
As a consequence, the incoming traffic can exceed the receiver rcvbuf size
even when the sender is not misbehaving.
Prevent such scenario forcibly allowing the TCP subflow to shrink the
TCP-level rcv wnd regardless of the current netns setting.
Fixes: f3589be0c420 ("mptcp: never shrink offered window") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-4-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 2 Jun 2026 12:14:10 +0000 (22:14 +1000)]
mptcp: close TOCTOU race while computing rcv_wnd
The MPTCP output path access locklessly the MPTCP-level ack_seq
in multiple times, using possibly different values for the data_ack
in the DSS option and to compute the announced rcv wnd for the same
packet.
Refactor the cote to avoid inconsistencies which may confuse the
peer. Also ensure that the MPTCP level rcv wnd is updated only when
the egress packet actually contains a DSS ack.
Fixes: fa3fe2b15031 ("mptcp: track window announced to peer") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-3-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 2 Jun 2026 12:14:09 +0000 (22:14 +1000)]
mptcp: fix retransmission loop when csum is enabled
Sashiko noted that retransmission with csum enabled can actually
transmit new data, but currently the relevant code does not update
accordingly snd_nxt.
The may cause incoming ack drop and an endless retransmission loop.
Paolo Abeni [Tue, 2 Jun 2026 12:14:08 +0000 (22:14 +1000)]
mptcp: fix missing wakeups in edge scenarios
The mptcp_recvmsg() can fill MPTCP socket receive queue via
mptcp_move_skbs(), but currently does not try to wakeup any listener,
because the same process is going to check the receive queue soon.
When multiple threads are reading from the same fd, the above can
cause stall. Add the missing wakeup.
Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-1-856831229976@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kurt Kanzenbach [Fri, 29 May 2026 17:11:47 +0000 (19:11 +0200)]
ptp: vclock: Switch from RCU to SRCU
The usage of PTP vClocks leads immediately to the following issues with
ptp4l with LOCKDEP and DEBUG_ATOMIC_SLEEP enabled: "BUG: sleeping function
called from invalid context".
ptp_convert_timestamp() acquires a mutex_t within a RCU read section. This
is illegal, because acquiring a mutex_t can result in voluntary scheduling
request which is not allowed within a RCU read section.
Replace the RCU usage with SRCU where sleeping is allowed.
Reported-by: Florian Zeitz <florian.zeitz@schettke.com> Closes: https://lore.kernel.org/all/00a8cce8-410e-4038-98af-49be6d93d7bd@schettke.com/ Fixes: 67d93ffc0f3c ("ptp: vclock: use mutex to fix "sleep on atomic" bug") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20260529-vclock_rcu-v2-1-02a5531fab92@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 2 Jun 2026 16:15:47 +0000 (16:15 +0000)]
ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Tamir Shahar <tamirthesis@gmail.com> Reported-by: Amit Klein <aksecurity@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260602161547.2642155-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianyu Li [Mon, 1 Jun 2026 11:36:40 +0000 (19:36 +0800)]
af_unix: Add test for SCM_INQ on partial read
Add test to verify that when a skb is partially consumed,
unix_inq_len() return correct remaining byte count.
Before:
# RUN scm_inq.stream.partial_read ...
# scm_inq.c:165:partial_read:Expected remain (512) == *(int *)CMSG_DATA(cmsg) (768)
# partial_read: Test terminated by assertion
# FAIL scm_inq.stream.partial_read
not ok 2 scm_inq.stream.partial_read
After:
# RUN scm_inq.stream.partial_read ...
# OK scm_inq.stream.partial_read
ok 2 scm_inq.stream.partial_read
Jianyu Li [Mon, 1 Jun 2026 11:36:39 +0000 (19:36 +0800)]
af_unix: Fix inq_len update problem in partial read
Currently inq_len is updated only when the whole skb is consumed.
If only part of the data is read, following SIOCINQ query would
get value greater than what actually left.
This change update inq_len timely in unix_stream_read_generic(),
and adjust unix_stream_read_skb() accordingly to prevent
repetitive update.
Fixes: f4e1fb04c123 ("af_unix: Use cached value for SOCK_STREAM in unix_inq_len().") Signed-off-by: Jianyu Li <jianyu.li@mediatek.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260601113640.231897-2-jianyu.li@mediatek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Suman Ghosh [Fri, 29 May 2026 11:37:05 +0000 (17:07 +0530)]
octeontx2-af: Fix initialization of mcam's entry2target_pffunc field
NPC mcam entry stores a mapping between mcam entry and target pcifunc.
During initialization of this field, API kmalloc_array has been used which
caused some junk values to array. Whereas, the array is expected to be
initialized by 0. This patch fixes the same by using kcalloc instead of
kmalloc_array.
Fixes: 55307fcb9258 ("octeontx2-af: Add mbox messages to install and delete MCAM rules") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1780054625-17090-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geetha sowjanya [Fri, 29 May 2026 11:37:57 +0000 (17:07 +0530)]
octeontx2-pf: Fix NDC sync operation errors
On system reboot "rvu_nicpf 0002:03:00.0: NDC sync operation failed"
error messages are shown, even if the operations is successful.
This is due to wrong if error check in ndc_syc() function.
Fixes: 42c45ac1419c ("octeontx2-af: Sync NIX and NPA contexts from NDC to LLC/DRAM") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1780054677-17249-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yizhou Zhao [Fri, 29 May 2026 10:50:16 +0000 (18:50 +0800)]
appletalk: aarp: zero-initialize aarp_entry to prevent heap info leak
aarp_alloc() allocates struct aarp_entry without zeroing it, but only
initializes refcnt and packet_queue. When an unresolved AARP entry is
created, hwaddr[ETH_ALEN] is left uninitialized.
aarp_seq_show() later prints this field with %pM when users read
/proc/net/atalk/arp. This can expose 6 bytes of stale heap data for
each unresolved entry.
Fix this by zero-initializing struct aarp_entry at allocation time.
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260529105017.81531-1-zhaoyz24@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Jelonek [Thu, 28 May 2026 20:52:40 +0000 (20:52 +0000)]
net: sfp: initialize i2c_block_size at adapter configure time
sfp->i2c_block_size is only assigned in sfp_sm_mod_probe(), which runs
from the state machine timer after SFP_F_PRESENT has been set. Between
those two points, sfp_module_eeprom() (the ethtool -m callback) gates
only on SFP_F_PRESENT and can be entered with i2c_block_size still at
its kzalloc'd value of 0.
On a pure-I2C adapter, sfp_i2c_read() then issues an i2c_transfer()
with msgs[1].len = 0 inside a loop that subtracts this_len from len
each iteration; on adapters that succeed a zero-length read the loop
never advances, spinning while holding rtnl_lock.
This was previously addressed by initializing i2c_block_size in
sfp_alloc() (commit 813c2dd78618), but the initialization was dropped
when i2c_block_size was split from i2c_max_block_size.
Initialize sfp->i2c_block_size from sfp->i2c_max_block_size in
sfp_i2c_configure(), so the field is valid as soon as the adapter is
known. sfp_sm_mod_probe() still reassigns it on each module insertion
to recover from a per-module clamp to 1 (sfp_id_needs_byte_io).
Jason Xing [Sat, 30 May 2026 04:26:30 +0000 (12:26 +0800)]
xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees.
Closes: https://lore.kernel.org/all/20260503200927.73EA1C2BCB4@smtp.kernel.org/ Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Fixes: 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support") Link: https://patch.msgid.link/20260530042630.80626-1-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Priya Hosur [Thu, 7 May 2026 08:01:37 +0000 (13:31 +0530)]
drm/amd/pm: smu_v14_0_0: use SoftMin for gfxclk in set_soft_freq_limited_range
In smu_v14_0_0_set_soft_freq_limited_range(), the gfxclk floor is
programmed via SetHardMinGfxClk together with SetSoftMaxGfxClk. Under
power_dpm_force_performance_level=high this pins HardMin to peak gfxclk.
In PMFW arbitration HardMin has higher priority than SoftMax, so the
firmware thermal/PPT throttler cannot clamp gfxclk via SoftMax once
HardMin is set to peak. Replace SetHardMinGfxClk with SetSoftMinGfxclk
so the driver still requests peak performance but the firmware
throttler retains the ability to clamp gfxclk under thermal/PPT
pressure. SoftMax handling is unchanged and no other clock domains
are affected.
Signed-off-by: Priya Hosur <Priya.Hosur@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ea273267fd29cbf6d83ee72329f59eb5042605b) Cc: stable@vger.kernel.org
Donet Tom [Wed, 27 May 2026 13:19:31 +0000 (18:49 +0530)]
drm/amdgpu: Fix incorrect VRAM GART mappings on non-4K page size systems
When mapping VRAM pages into the GART page table,
amdgpu_gart_map_vram_range() assumes that the system page size is the
same as the GPU page size.
On systems with non-4K page sizes, multiple GPU pages can exist within
a single CPU page. As a result, the mappings are created incorrectly
because fewer page table entries are programmed than required.
Fix this by programming the mappings correctly for non-4K page size
systems.
Fixes: 237d623ae659 ("drm/amdgpu/gart: Add helper to bind VRAM pages (v2)") Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a8f0bc22388f74e0cf4ed8b7d1846c580eaf44cc) Cc: stable@vger.kernel.org
Sunil Khatri [Mon, 25 May 2026 04:26:23 +0000 (09:56 +0530)]
drm/amdgpu/userq: move wptr_obj cleanup in mqd_destroy
In case when queue_create fails and mqd has already been
allocated and hence wptr_obj is not cleaned up.
So moving that cleanup part to mqd_destroy so it takes
care of all the cases of clean up and during tear down of
the queue.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 43355f62cd2ef5386c2693df537c232ea0f2ce6c)
Prike Liang [Tue, 26 May 2026 02:25:26 +0000 (10:25 +0800)]
drm/amdgpu: improve the userq seq BO free bit lookup
Use find_next_zero_bit() to locate the next free seq slot bit
instead of the current walk, for more efficient bitmap scanning.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ff905a9b6228de9eedd0db71ecb1bdde91fb898d)
Sunil Khatri [Mon, 25 May 2026 07:48:00 +0000 (13:18 +0530)]
drm/amdgpu/userq: remove the vital queue unmap logging
Mesa userqueues free does not wait for the free to complete and go ahead
in unmapping the vital bos while kernel is still in queue free and
corresponding cleanup.
So ideally we don't need the logging for that and hence remove the warn
message as this is expected behaviour and functionally, we are making
sure to wait for the required fences before unmap.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 758a868043dcb07eca923bc451c16da3e73dc47c)
Andrew Martin [Thu, 28 May 2026 16:54:39 +0000 (12:54 -0400)]
drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11
The v11 MQD manager incorrectly assigned the CP-compute variants of
checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions
use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct
v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.
During CRIU checkpoint of an SDMA queue on Navi3x:
- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer,
leaking 1536 bytes of adjacent GTT memory to userspace
During CRIU restore:
- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer,
corrupting 1536 bytes of adjacent GTT memory (often the ring buffer
or neighboring MQDs)
This is a copy-paste regression unique to v11. All other ASIC backends
(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.
Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly
handle the smaller v11_sdma_mqd structure, matching the pattern used in
other MQD managers.
Fixes: cc009e613de6 ("drm/amdkfd: Add KFD support for soc21 v3") Assisted-by: Claude:Sonnet 4-5 Signed-off-by: Andrew Martin <andrew.martin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c) Cc: stable@vger.kernel.org
Muhammad Bilal [Sat, 23 May 2026 16:56:46 +0000 (16:56 +0000)]
drm/amdkfd: fix NULL dereference in get_queue_ids()
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
Fixes: a70a93fa568b ("drm/amdkfd: add debug suspend and resume process queues operation") Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) Cc: stable@vger.kernel.org
Vitaly Prosyak [Fri, 29 May 2026 17:50:38 +0000 (13:50 -0400)]
drm/amdgpu: set noretry=1 as default for GFX 10.1.x (Navi10/12/14)
Problem:
While developing the amd_close_race IGT test (which intentionally triggers
execute permission faults by removing VM_PAGE_EXECUTABLE from GPU page table
entries), we discovered that on Navi10 (GFX 10.1.x) these faults produce
zero diagnostic output. The GPU simply hangs silently for ~10s until the
scheduler timeout fires. There is no way to distinguish an execute
permission fault from any other type of GPU hang.
Root cause:
GFX 10.1.x defaults to noretry=0, which sets
RETRY_PERMISSION_OR_INVALID_PAGE_FAULT=1 in the GFXHUB UTCL2 registers
(gfxhub_v2_0.c line 313). With this bit set, permission faults (valid PTE,
wrong R/W/X bits) are handled entirely within the UTCL1/UTCL2 hardware
loop: UTCL2 returns an XNACK to UTCL1, and UTCL1 re-requests the
translation indefinitely, expecting software to eventually fix the
permission bits (as happens in SVM/HMM recovery). No interrupt of any kind
reaches the IH ring.
This is different from invalid-page faults (V=0) which DO generate a retry
fault interrupt that the driver can escalate to a no-retry fault. Permission
faults with valid PTEs loop silently forever in hardware.
GFX 10.3+ already defaults to noretry=1, which makes permission faults
generate immediate L2 protection fault interrupts. GFX 10.1.x was
inadvertently left out of this default.
Fix:
Change the noretry=1 threshold from IP_VERSION(10, 3, 0) to
IP_VERSION(10, 1, 0) in amdgpu_gmc_noretry_set(). This is a one-line
change that aligns GFX 10.1.x behavior with GFX 10.3+ and all newer
generations.
With noretry=1, the existing non-retry fault handler
(gmc_v10_0_process_interrupt) already decodes and prints the full
GCVM_L2_PROTECTION_FAULT_STATUS register including PERMISSION_FAULTS,
faulting address, VMID, PASID, and process name. No additional logging
code is needed — the fix is purely routing permission faults to the
existing, fully-capable non-retry interrupt handler.
v2: Dropped GFX10-specific logging from gmc_v10_0.c and
kfd_int_process_v10.c (Felix Kuehling). v1 added logging in the retry
fault handler, but with noretry=1 permission faults take the non-retry
path — the v1 retry handler code was dead and would never execute.
Tested on Navi10 (GFX 10.1.10):
- Execute permission faults now produce immediate, clear output:
[gfxhub] page fault (src_id:0 ring:64 vmid:4 pasid:592)
Process amd_close_race pid 13380 thread amd_close_race pid 13384
in page at address 0x40001000 from client 0x1b (UTCL2)
GCVM_L2_PROTECTION_FAULT_STATUS:0x00700881
PERMISSION_FAULTS: 0x8
- No regressions with properly-mapped GPU workloads
Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit eb21edd24c40d81066753f8ac6f23bce15745395) Cc: stable@vger.kernel.org
Timur Kristóf [Mon, 25 May 2026 11:45:02 +0000 (13:45 +0200)]
drm/amdgpu/gfxhub: Program CRASH_ON_*_FAULT bits to 0 as needed
When the fault stop mode isn't AMDGPU_VM_FAULT_STOP_ALWAYS,
these bits should be programmed to 0.
Program CRASH_ON_NO_RETRY_FAULT and CRASH_ON_RETRY_FAULT
always, to make sure to clear the bits when we don't want
to crash.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d0cd99e73090700b7a942b98a3327ec966597d0a)
Yang Wang [Mon, 11 May 2026 08:33:37 +0000 (16:33 +0800)]
drm/amd/pm: zero unused SMU argument registers
SMU messages may use fewer arguments than the available argument registers,
the previous code only wrote used registers and left the rest unchanged,
so stale values from a prior message could persist.
Write all argument registers for each message and zero the unused tail
to keep command arguments deterministic and avoid unintended carry-over.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e03b635f61f77ebd5107ef82f48e3221cb695856)
Yang Wang [Fri, 29 May 2026 03:47:31 +0000 (11:47 +0800)]
drm/amd/pm: mark metrics.energy_accumulator is invalid for smu 14.0.2
EnergyAccumulator is unsupported on SMU 14.0.2, mark it invalid.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 646b05043eeed04b51c14aad22a400a8250af4b7) Cc: stable@vger.kernel.org
Yang Wang [Tue, 19 May 2026 03:18:12 +0000 (11:18 +0800)]
drm/amd/pm: fix smu13 power limit default/cap calculation
smu_v13_0_0_get_power_limit() and smu_v13_0_7_get_power_limit() mix
runtime power_limit with PP table limits when reporting default/min/max.
When current power limit query succeeds, default_power_limit was set to the
runtime value instead of the PP table default, and min/max could be derived
from inconsistent bases (MsgLimits/runtime), leading to incorrect cap info.
Use SocketPowerLimitAc/Dc as the PP default base (pp_limit), keep
current_power_limit as runtime value, and derive min/max from pp_limit with
OD percentages.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5227 Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1eaf26db95901ca70737503a89b831dd763c8453) Cc: stable@vger.kernel.org
projects / thirdparty / kernel / linux.git / log
