Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. However, it was never implemented in
__sock_cmsg_send thus breaking SO_TIMESTAMPING cmsg for platforms using
SO_TIMESTAMPING_NEW.
The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was
mis-applied to bnxt_cfg_ntp_filters() and should have been applied to
bnxt_sp_task().
Fixes: 19241368443f ("bnxt_en: Send PF driver unload notification to all VFs.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.
Fixes: 16626b0cc3d5 ("asix: Add a new driver for the AX88172A") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
During QoS scheduling testing with multiple strict priority flows, the
netdev tx watchdog timeout routine is invoked when a low priority QoS
queue doesn't get a chance to transmit the packets because other high
priority flows are completely subscribing the transmit link. The netdev
tx watchdog timeout routine will stop MAC RX and TX functionality in
otx2_stop() routine before cleanup of HW TX queues which results in SMQ
flush errors because the packets belonging to low priority queues will
never gets flushed since MAC TX is disabled. This patch fixes the issue
by re-enabling MAC TX to ensure the packets in HW pipeline gets flushed
properly.
Fixes: a7faa68b4e7f ("octeontx2-af: Start/Stop traffic in CGX along with NPC") Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the NIX TX link credits are initialized based on the max frame
size that can be transmitted on a link but when the MTU is changed, the
NIX TX link credits are reprogrammed by the SW based on the new MTU value.
Since SMQ max packet length is programmed to max frame size by default,
there is a chance that NIX TX may stall while sending a max frame sized
packet on the link with insufficient credits to send the packet all at
once. This patch avoids stall issue by not changing the link credits
dynamically when the MTU is changed.
Fixes: 1c74b89171c3 ("octeontx2-af: Wait for TX link idle for credits change") Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Nithin Kumar Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When number of LMACs active on a CGX/RPM are 3, then
current NIX link credit config based on per lmac fifo
length which inturn is calculated as
'lmac_fifo_len = total_fifo_len / 3', is incorrect. In HW
one of the LMAC gets half of the FIFO and rest gets 1/4th.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha Sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a0d9528f6daf ("octeontx2-af: Always configure NIX TX link credits based on max frame size") Signed-off-by: Sasha Levin <sashal@kernel.org>
Current implementation is such that 802.3x pause frames are
enabled by default. As CGX and RPM blocks support PFC
(priority flow control) also, instead of driver enabling one
between them enable them upon request from PF or its VFs.
Also add support to disable pause frames in driver unbind.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a0d9528f6daf ("octeontx2-af: Always configure NIX TX link credits based on max frame size") Signed-off-by: Sasha Levin <sashal@kernel.org>
When dma_alloc_coherent() fails, we should free qdev->lrg_buf
to prevent potential memleak.
Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue based on the MTU.") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231227070227.10527-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the Intel Software Manual for I225, Section 7.5.2.7,
hicredit should be multiplied by the constant link-rate value, 0x7736.
Currently, the old constant link-rate value, 0x7735, from the boards
supported on igb are being used, most likely due to a copy'n'paste, as
the rest of the logic is the same for both drivers.
Update hicredit accordingly.
Fixes: 1ab011b0bf07 ("igc: Add support for CBS offloading") Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Rodrigo Cataldo <rodrigo.cadore@l-acoustics.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability
register will be cleared. This can lead to issues when a VF is
assigned to a VM because in these cases the VF driver receives no
indication of the PF PCI error/reset and additionally it is incapable
of restoring the cleared flag in the hypervisor configuration space
without fully reinitializing the driver interrupt functionality.
Since the VF driver is unable to easily resolve this condition on its own,
restore the VF MSI-X flag during the PF PCI reset handling.
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
While the I2S mux gets this right the S/PDIF mux does not, fix the return
value.
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
We are checking if there has been a change and exiting early if not but we
are not providing the correct return value in the latter case, fix this.
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
Commit 3116f59c12bd ("i40e: fix use-after-free in
i40e_sync_filters_subtask()") avoided use-after-free issues,
by increasing refcount during update the VSI filter list to
the HW. However, it missed the unicast situation.
When deleting an unicast FDB entry, the i40e driver will release
the mac_filter, and i40e_service_task will concurrently request
firmware to add the mac_filter, which will lead to the following
use-after-free issue.
Fix again for both netdev->uc and netdev->mc.
BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379
Commit 86a7e0b69bd5 ("net: prevent rewrite of msg_name in
sock_sendmsg()") made sock_sendmsg save the incoming msg_name pointer
and restore it before returning, to insulate the caller against
msg_name being changed by the called code. If the address length
was also changed however, we may return with an inconsistent structure
where the length doesn't match the address, and attempts to reuse it may
lead to lost packets.
For example, a kernel that doesn't have commit 1c5950fc6fe9 ("udp6: fix
potential access to stale information") will replace a v4 mapped address
with its ipv4 equivalent, and shorten namelen accordingly from 28 to 16.
If the caller attempts to reuse the resulting msg structure, it will have
the original ipv6 (v4 mapped) address but an incorrect v4 length.
Fixes: 86a7e0b69bd5 ("net: prevent rewrite of msg_name in sock_sendmsg()") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the init path, nft_data_init() bumps the chain reference counter,
decrement it on error by following the error path which calls
nft_data_release() to restore it.
The flag DMA_TX_APPEND_CRC was only written to the first DMA descriptor
in the TX path, where each descriptor corresponds to a single skbuff
fragment (or the skbuff head). This led to packets with no FCS appearing
on the wire if the kernel allocated the packet in fragments, which would
always happen when using PACKET_MMAP/TPACKET (cf. tpacket_fill_skb() in
net/af_packet.c).
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Adrian Cinal <adriancinal1@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231228135638.1339245-1-adriancinal1@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In efx_probe_filters, the channel->rps_flow_id is freed in a
efx_for_each_channel marco when success equals to 0.
However, after the following call chain:
Running a multi-arch kernel (multi_v7_defconfig) on a Raspberry Pi 3B+
with enabled CONFIG_UBSAN triggers the following warning:
UBSAN: array-index-out-of-bounds in arch/arm/mach-sunxi/mc_smp.c:810:29
index 2 is out of range for type 'sunxi_mc_smp_data [2]'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc6-00248-g5254c0cbc92d
Hardware name: BCM2835
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x40/0x4c
dump_stack_lvl from ubsan_epilogue+0x8/0x34
ubsan_epilogue from __ubsan_handle_out_of_bounds+0x78/0x80
__ubsan_handle_out_of_bounds from sunxi_mc_smp_init+0xe4/0x4cc
sunxi_mc_smp_init from do_one_initcall+0xa0/0x2fc
do_one_initcall from kernel_init_freeable+0xf4/0x2f4
kernel_init_freeable from kernel_init+0x18/0x158
kernel_init from ret_from_fork+0x14/0x28
Since the enabled method couldn't match with any entry from
sunxi_mc_smp_data, the value of the index shouldn't be used right after
the loop. So move it after the check of ret in order to have a valid
index.
When the feature was added it was enabled for SW timestamps only but
with current hardware the same out-of-order timestamps can be seen.
Let's expand the area for the feature to all types of timestamps.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 7f6ca95d16b9 ("net: Implement missing getsockopt(SO_TIMESTAMPING_NEW)") Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch calls into sock_cmsg_send() to parse the user supplied
control information into a struct sockcm_cookie. Then assign the
requested transmit time to the skb.
This makes it possible to use the Earliest TXTIME First (ETF) packet
scheduler with the CAN_RAW protocol. The user can send a CAN_RAW frame
with a TXTIME and the kernel (with the ETF scheduler) will take care
of sending it to the network interface.
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. Setting the option is handled in
sk_setsockopt(), querying it was not handled in sk_getsockopt(), though.
Following remarks on an earlier submission of this patch, keep the old
behavior of getsockopt(SO_TIMESTAMPING_OLD) which returns the active
flags even if they actually have been set through SO_TIMESTAMPING_NEW.
The new getsockopt(SO_TIMESTAMPING_NEW) is stricter, returning flags
only if they have been set through the same option.
Not sure if it's related, but those NICs have a BMC device at function
0:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Realtek RealManage BMC [10ec:816e] (rev 1a)
Trial and error shows that increase the loop wait on
rtl_ep_ocp_read_cond to 30 can eliminate the issue, so let
rtl8168ep_driver_start() to wait a bit longer.
Fixes: e6d6ca6e1204 ("r8169: Add support for another RTL8168FP") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
m->data needs to be freed when em_text_destroy is called.
Fixes: d675c989ed2d ("[PKT_SCHED]: Packet classification based on textsearch (ematch)") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Under heavy traffic, the BlueField Gigabit interface can
become unresponsive. This is due to a possible race condition
in the mlxbf_gige_rx_packet function, where the function exits
with producer and consumer indices equal but there are remaining
packet(s) to be processed. In order to prevent this situation,
read receive consumer index *before* the HW replenish so that
the mlxbf_gige_rx_packet function returns an accurate return
value even if a packet is received into just-replenished buffer
prior to exiting this routine. If the just-replenished buffer
is received and occupies the last RX ring entry, the interface
would not recover and instead would encounter RX packet drops
related to internal buffer shortages since the driver RX logic
is not being triggered to drain the RX ring. This patch will
address and prevent this "ring full" condition.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: b73d9e6225e8 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg") Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20231225080608.967953-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the driver accepts VLAN EtherType steering rules regardless of
the configured mask. And things might fail silently or with confusing error
messages to the user. The VLAN EtherType can only be matched by full
mask. Therefore, add a check for that.
For instance the following rule is invalid, but the driver accepts it and
ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops") Suggested-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.
There are two ways to handle the VLAN TCI mask:
1. Match on the PCP field using a VLAN prio filter
2. Match on complete TCI field using a flex filter
Therefore, add checks and code for that.
For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x0 mask: 0xffff
| VLAN: 0x1 mask: 0x1fff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 1
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Prevent VF from configuring filters with unsupported actions or use
REDIRECT action with invalid tc number. Current checks could cause
out of bounds access on PF side.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
llcp_sock_sendmsg() calls nfc_llcp_send_ui_frame() which in turn calls
nfc_alloc_send_skb(), which accesses the nfc_dev from the llcp_sock for
getting the headroom and tailroom needed for skb allocation.
Parallelly the nfc_dev can be freed, as the refcount is decreased via
nfc_free_device(), leading to a UAF reported by Syzkaller, which can
be summarized as follows:
When a reference to llcp_local is acquired, we do not acquire the same
for the nfc_dev. This leads to freeing even when the llcp_local is in
use, and this is the case with the UAF described above too.
Thus, when we acquire a reference to llcp_local, we should acquire a
reference to nfc_dev, and release the references appropriately later.
References for llcp_local is initialized in nfc_llcp_register_device()
(which is called by nfc_register_device()). Thus, we should acquire a
reference to nfc_dev there.
nfc_unregister_device() calls nfc_llcp_unregister_device() which in
turn calls nfc_llcp_local_put(). Thus, the reference to nfc_dev is
appropriately released later.
Reported-and-tested-by: syzbot+bbe84a4010eeea00982d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=bbe84a4010eeea00982d Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket") Reviewed-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Siddh Raman Pant <code@siddh.me> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
For aux reads, the value `msg->size` indicates the size of the buffer
provided by `msg->buffer`. We should never in any circumstances write
more bytes to the buffer since it may overflow the buffer.
In the ti-sn65dsi86 driver there is one code path that reads the
transfer length from hardware. Even though it's never been seen to be
a problem, we should make extra sure that the hardware isn't
increasing the length since doing so would cause us to overrun the
buffer.
On older devices (before unified image!) we can end up calling
stop_device from an rfkill interrupt. However, in stop_device
we attempt to synchronize IRQs, which then of course deadlocks.
Avoid this by checking the context, if running from the IRQ
thread then don't synchronize. This wouldn't be correct on a
new device since RSS is supported, but older devices only have
a single interrupt/queue.
Fixes: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI") Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael reported that when attempting to resume from suspend to RAM on ASUS
mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1), 08d0cc5f3426
("PCI/ASPM: Remove pcie_aspm_pm_state_change()") caused a 12-second delay
with no output, followed by a reboot.
Workarounds include:
- Reverting 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
- Booting with "pcie_aspm=off"
- Booting with "pcie_aspm.policy=performance"
- "echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm"
before suspending
- Connecting a USB flash drive
LEDs in 'HP ProBook 440 G6' laptop are controlled by ALC236 codec.
Enable already existing quirk 'ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF'
to fix mute and mic-mute LEDs.
Only call truncate_bdev_range() if the fallocate mode is supported. This
fixes a bug where data in the pagecache could be invalidated if the
fallocate() was called on the block device with an invalid mode.
Fixes: 25f4c41415e5 ("block: implement (some of) fallocate for block devices") Cc: stable@vger.kernel.org Reported-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Fixes: line? I've never seen those wrapped. Link: https://lore.kernel.org/r/20231011201230.750105-1-sarthakkukreti@chromium.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dns_resolver_preparse() function has a check on the size of the
payload for the basic header of the binary-style payload, but is missing
a check for the size of the V1 server-list payload header after
determining that's what we've been given.
Fix this by getting rid of the the pointer to the basic header and just
assuming that we have a V1 server-list payload and moving the V1 server
list pointer inside the if-statement. Dealing with other types and
versions can be left for when such have been defined.
This can be tested by doing the following with KASAN enabled:
BUG: KASAN: slab-out-of-bounds in dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127
Read of size 1 at addr ffff888028894084 by task syz-executor265/5069
...
Call Trace:
dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127
__key_create_or_update+0x453/0xdf0 security/keys/key.c:842
key_create_or_update+0x42/0x50 security/keys/key.c:1007
__do_sys_add_key+0x29c/0x450 security/keys/keyctl.c:134
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x62/0x6a
This patch was originally by Edward Adam Davis, but was modified by
Linus.
Fixes: b946001d3bb1 ("keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry") Reported-and-tested-by: syzbot+94bbb75204a05da3d89f@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/0000000000009b39bc060c73e209@google.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Cc: Edward Adam Davis <eadavis@qq.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jeffrey E Altman <jaltman@auristor.com> Cc: Wang Lei <wang840925@gmail.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: Steve French <sfrench@us.ibm.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jeffrey E Altman <jaltman@auristor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lee pointed out issue found by syscaller [0] hitting BUG in prog array
map poke update in prog_array_map_poke_run function due to error value
returned from bpf_arch_text_poke function.
There's race window where bpf_arch_text_poke can fail due to missing
bpf program kallsym symbols, which is accounted for with check for
-EINVAL in that BUG_ON call.
The problem is that in such case we won't update the tail call jump
and cause imbalance for the next tail call update check which will
fail with -EBUSY in bpf_arch_text_poke.
I'm hitting following race during the program load:
After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next
poke update fails on expected jump instruction check in bpf_arch_text_poke
with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run.
Similar race exists on the program unload.
Fixing this by moving the update to bpf_arch_poke_desc_update function which
makes sure we call __bpf_arch_text_poke that skips the bpf address check.
Each architecture has slightly different approach wrt looking up bpf address
in bpf_arch_text_poke, so instead of splitting the function or adding new
'checkip' argument in previous version, it seems best to move the whole
map_poke_run update as arch specific code.
Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") Reported-by: syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Cc: Lee Jones <lee@kernel.org> Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__bio_for_each_segment assumes that the first struct bio_vec argument
doesn't change - it calls "bio_advance_iter_single((bio), &(iter),
(bvl).bv_len)" to advance the iterator. Unfortunately, the dm-integrity
code changes the bio_vec with "bv.bv_len -= pos". When this code path
is taken, the iterator would be out of sync and dm-integrity would
report errors. This happens if the machine is out of memory and
"kmalloc" fails.
Fix this bug by making a copy of "bv" and changing the copy instead.
To synchronize the timestamps with the ring buffer reservation, there are
two timestamps that are saved in the buffer meta data.
1. before_stamp
2. write_stamp
When the two are equal, the write_stamp is considered valid, as in, it may
be used to calculate the delta of the next event as the write_stamp is the
timestamp of the previous reserved event on the buffer.
This is done by the following:
/*A*/ w = current position on the ring buffer
before = before_stamp
after = write_stamp
ts = read current timestamp
if (before != after) {
write_stamp is not valid, force adding an absolute
timestamp.
}
/*B*/ before_stamp = ts
/*C*/ write = local_add_return(event length, position on ring buffer)
if (w == write - event length) {
/* Nothing interrupted between A and C */
/*E*/ write_stamp = ts;
delta = ts - after
/*
* If nothing interrupted again,
* before_stamp == write_stamp and write_stamp
* can be used to calculate the delta for
* events that come in after this one.
*/
} else {
/*
* The slow path!
* Was interrupted between A and C.
*/
This is the place that there's a bug. We currently have:
after = write_stamp
ts = read current timestamp
/*F*/ if (write == current position on the ring buffer &&
after < ts && cmpxchg(write_stamp, after, ts)) {
delta = ts - after;
} else {
delta = 0;
}
The assumption is that if the current position on the ring buffer hasn't
moved between C and F, then it also was not interrupted, and that the last
event written has a timestamp that matches the write_stamp. That is the
write_stamp is valid.
But this may not be the case:
If a task context event was interrupted by softirq between B and C.
And the softirq wrote an event that got interrupted by a hard irq between
C and E.
and the hard irq wrote an event (does not need to be interrupted)
We have:
/*B*/ before_stamp = ts of normal context
---> interrupted by softirq
/*B*/ before_stamp = ts of softirq context
---> interrupted by hardirq
/*B*/ before_stamp = ts of hard irq context
/*E*/ write_stamp = ts of hard irq context
/* matches and write_stamp valid */
<----
/*E*/ write_stamp = ts of softirq context
/* No longer matches before_stamp, write_stamp is not valid! */
<---
w != write - length, go to slow path
// Right now the order of events in the ring buffer is:
//
// |-- softirq event --|-- hard irq event --|-- normal context event --|
//
after = write_stamp (this is the ts of softirq)
ts = read current timestamp
if (write == current position on the ring buffer [true] &&
after < ts [true] && cmpxchg(write_stamp, after, ts) [true]) {
delta = ts - after [Wrong!]
The delta is to be between the hard irq event and the normal context
event, but the above logic made the delta between the softirq event and
the normal context event, where the hard irq event is between the two. This
will shift all the remaining event timestamps on the sub-buffer
incorrectly.
The write_stamp is only valid if it matches the before_stamp. The cmpxchg
does nothing to help this.
Instead, the following logic can be done to fix this:
before = before_stamp
ts = read current timestamp
before_stamp = ts
after = write_stamp
if (write == current position on the ring buffer &&
after == before && after < ts) {
delta = ts - after
} else {
delta = 0;
}
The above will only use the write_stamp if it still matches before_stamp
and was tested to not have changed since C.
As a bonus, with this logic we do not need any 64-bit cmpxchg() at all!
This means the 32-bit rb_time_t workaround can finally be removed. But
that's for a later time.
NFT_MSG_DELSET deactivates all elements in the set, skip
set->ops->commit() to avoid the unnecessary clone (for the pipapo case)
as well as the sync GC cycle, which could deactivate again expired
elements in such set.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Reported-by: Kevin Rich <kevinrich1337@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length,
ksmbd_check_message doesn't validate request buffer it correctly.
So slab-out-of-bounds warning from calling smb_strndup_from_utf16()
in smb2_open() could happen. If ->NameLength is non-zero, Set the larger
of the two sums (Name and CreateContext size) as the offset and length of
the data area.
Reported-by: Yang Chaoming <lometsj@live.com> Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When filtering is enabled, a temporary buffer is created to place the
content of the trace event output so that the filter logic can decide
from the trace event output if the trace event should be filtered out or
not. If it is to be filtered out, the content in the temporary buffer is
simply discarded, otherwise it is written into the trace buffer.
But if an interrupt were to come in while a previous event was using that
temporary buffer, the event written by the interrupt would actually go
into the ring buffer itself to prevent corrupting the data on the
temporary buffer. If the event is to be filtered out, the event in the
ring buffer is discarded, or if it fails to discard because another event
were to have already come in, it is turned into padding.
The update to the write_stamp in the rb_try_to_discard() happens after a
fix was made to force the next event after the discard to use an absolute
timestamp by setting the before_stamp to zero so it does not match the
write_stamp (which causes an event to use the absolute timestamp).
But there's an effort in rb_try_to_discard() to put back the write_stamp
to what it was before the event was added. But this is useless and
wasteful because nothing is going to be using that write_stamp for
calculations as it still will not match the before_stamp.
Remove this useless update, and in doing so, we remove another
cmpxchg64()!
Also update the comments to reflect this change as well as remove some
extra white space in another comment.
Link: https://lore.kernel.org/linux-trace-kernel/20231215081810.1f4f38fe@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Vincent Donnefort <vdonnefort@google.com> Fixes: b2dd797543cf ("ring-buffer: Force absolute timestamp on discard of event") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an application blocks on the snapshot or snapshot_raw files, expecting
to be woken up when a snapshot occurs, it will not happen. Or it may
happen with an unexpected result.
That result is that the application will be reading the main buffer
instead of the snapshot buffer. That is because when the snapshot occurs,
the main and snapshot buffers are swapped. But the reader has a descriptor
still pointing to the buffer that it originally connected to.
This is fine for the main buffer readers, as they may be blocked waiting
for a watermark to be hit, and when a snapshot occurs, the data that the
main readers want is now on the snapshot buffer.
But for waiters of the snapshot buffer, they are waiting for an event to
occur that will trigger the snapshot and they can then consume it quickly
to save the snapshot before the next snapshot occurs. But to do this, they
need to read the new snapshot buffer, not the old one that is now
receiving new data.
Also, it does not make sense to have a watermark "buffer_percent" on the
snapshot buffer, as the snapshot buffer is static and does not receive new
data except all at once.
Link: https://lore.kernel.org/linux-trace-kernel/20231228095149.77f5b45d@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: debdd57f5145f ("tracing: Make a snapshot feature available from userspace") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tracefs file "buffer_percent" is to allow user space to set a
water-mark on how much of the tracing ring buffer needs to be filled in
order to wake up a blocked reader.
0 - is to wait until any data is in the buffer
1 - is to wait for 1% of the sub buffers to be filled
50 - would be half of the sub buffers are filled with data
100 - is not to wake the waiter until the ring buffer is completely full
There is two issues with the above when full == 100.
1. dirty * 100 > 100 * nr_pages will never be true
That is, the above is basically saying that if the user sets
buffer_percent to 100, more pages need to be dirty than exist in the
ring buffer!
2. The page that the writer is on is never considered dirty, as dirty
pages are only those that are full. When the writer goes to a new
sub-buffer, it clears the contents of that sub-buffer.
That is, even if the check was ">=" it would still not be equal as the
most pages that can be considered "dirty" is nr_pages - 1.
To fix this, add one to dirty and use ">=" in the compare.
isize = i_size_read(inode) // 4096
// Read the latest isize 4096, but without smp_rmb(), there may be
// Load-Load disorder resulting in the data in the 2048-4096 range
// in the page is not up-to-date.
copy_page_to_iter
// copyout 4096
In the concurrency above, we read the updated i_size, but there is no read
barrier to ensure that the data in the page is the same as the i_size at
this point, so we may copy the unsynchronized page out. Hence adding the
missing read memory barrier to fix this.
This is a Load-Load reordering issue, which only occurs on some weak
mem-ordering architectures (e.g. ARM64, ALPHA), but not on strong
mem-ordering architectures (e.g. X86). And theoretically the problem
doesn't only happen on ext4, filesystems that call filemap_read() but
don't hold inode lock (e.g. btrfs, f2fs, ubifs ...) will have this
problem, while filesystems with inode lock (e.g. xfs, nfs) won't have
this problem.
Link: https://lkml.kernel.org/r/20231213062324.739009-1-libaokun1@huawei.com Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: yangerkun <yangerkun@huawei.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This can cause a race with bt_sock_ioctl() because
bt_sock_recvmsg() gets the skb from sk->sk_receive_queue
and then frees it without holding lock_sock.
A use-after-free for a skb occurs with the following flow.
```
bt_sock_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
bt_sock_ioctl() -> skb_peek()
```
Add lock_sock to bt_sock_recvmsg() to fix this issue.
Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A small CIFS buffer (448 bytes) isn't big enough to hold
SMB2_QUERY_INFO request along with user's input data from
CIFS_QUERY_INFO ioctl. That is, if the user passed an input buffer >
344 bytes, the client will memcpy() off the end of @req->Buffer in
SMB2_query_info_init() thus causing the following KASAN splat:
BUG: KASAN: slab-out-of-bounds in SMB2_query_info_init+0x242/0x250 [cifs]
Write of size 1023 at addr ffff88801308c5a8 by task a.out/1240
Fix this by increasing size of SMB2_QUERY_INFO request buffers and
validating input length to prevent other callers from overflowing @req
in SMB2_query_info_init() as well.
Fixes: f5b05d622a3e ("cifs: add IOCTL for QUERY_INFO passthrough to userspace") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This prevents the warning message "SPI driver has no spi_device_id for..."
when registering the driver. More importantly, it makes sure that
module autoloading works as spi relies on spi: modaliases and not of.
While at it, move the of_device_id table to it's natural place.
Fixes: fff7352bf7a3c ("iio: imu: Add support for adis16475") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231102125258.3284830-1-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The proposed spi_get_device_match_data() helper is for retrieving
a driver data associated with the ID in an ID table. First, it tries
to get driver data of the device enumerated by firmware interface
(usually Device Tree or ACPI). If none is found it falls back to
the SPI ID table matching.
When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the disconnecting status is enabled.
cc: <stable@vger.kernel.org> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
- Check if wol is supported on reset instead of everytime get_wol
is called.
- Save wolopts in private data instead of relying on the HW to save it.
- Defer enabling WoL until suspend instead of enabling it everytime
set_wol is called.
Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: aef05e349bfd ("net: usb: ax88179_178a: avoid failed operations when device is disconnected") Signed-off-by: Sasha Levin <sashal@kernel.org>
This big patch sprinkles const on local variables and
function arguments which may refer to netdev->dev_addr.
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Some of the changes here are not strictly required - const
is sometimes cast off but pointer is not used for writing.
It seems like it's still better to add the const in case
the code changes later or relevant -W flags get enabled
for the build.
Here "temp" is the number of characters that we have written and "size"
is the size of the buffer. The intent was clearly to say that if we have
written to the end of the buffer then stop.
However, for that to work the comparison should have been done on the
original "size" value instead of the "size -= temp" value. Not only
will that not trigger when we want to, but there is a small chance that
it will trigger incorrectly before we want it to and we break from the
loop slightly earlier than intended.
This code was recently changed from using snprintf() to scnprintf(). With
snprintf() we likely would have continued looping and passed a negative
size parameter to snprintf(). This would have triggered an annoying
WARN(). Now that we have converted to scnprintf() "size" will never
drop below 1 and there is no real need for this test. We could change
the condition to "if (temp <= 1) goto done;" but just deleting the test
is cleanest.
With subtle timings changes, we can now sometimes get an external abort on
non-linefetch error booting am3 devices at sysc_reset(). This is because
of a missing reset delay needed for the usb target module.
Looks like we never enabled the delay earlier for am3, although a similar
issue was seen earlier with a similar usb setup for dm814x as described in
commit ebf244148092 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x").
Cc: stable@vger.kernel.org Fixes: 0782e8572ce4 ("ARM: dts: Probe am335x musb with ti-sysc") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When client send SMB2_CREATE_ALLOCATION_SIZE create context, ksmbd update
old size to ->AllocationSize in smb2 create response. ksmbd_vfs_getattr()
should be called after it to get updated stat result.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If client send different parent key, different client guid, or there is
no parent lease key flags in create context v2 lease, ksmbd send lease
break to client.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
RWH(Read + Write + Handle) caching state is not supported for directory.
ksmbd downgrade it to RH for directory if client send RWH caching lease
state.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Namjae Jeon [Wed, 27 Dec 2023 10:25:58 +0000 (19:25 +0900)]
ksmbd: have a dependency on cifs ARC4
Omitted the change that has a dependency on cifs ARC4 from backporting
commit f9929ef6a2a5("ksmbd: add support for key exchange").
This patch make ksmbd have a dependeny on cifs ARC4.
Fixes: c5049d2d73b2 ("ksmbd: add support for key exchange") Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fuse submounts do not perform a lookup for the nodeid that they inherit
from their parent. Instead, the code decrements the nlookup on the
submount's fuse_inode when it is instantiated, and no forget is
performed when a submount root is evicted.
Trouble arises when the submount's parent is evicted despite the
submount itself being in use. In this author's case, the submount was
in a container and deatched from the initial mount namespace via a
MNT_DEATCH operation. When memory pressure triggered the shrinker, the
inode from the parent was evicted, which triggered enough forgets to
render the submount's nodeid invalid.
Since submounts should still function, even if their parent goes away,
solve this problem by sharing refcounted state between the parent and
its submount. When all of the references on this shared state reach
zero, it's safe to forget the final lookup of the fuse nodeid.
That's not really correct because the synchronization should happen before
interrupts are re-enabled to ensure that a pending interrupt observes the
complete update of the opcodes.
It's not entirely clear whether the interrupt entry provides enough
serialization already, but moving the sync_core() invocation into interrupt
disabled region does no harm and is obviously correct.
Fixes: 6fffacb30349 ("x86/alternatives, jumplabel: Use text_poke_early() before mm_init()") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When failing to create a vcpu because (for example) it has a
duplicate vcpu_id, we destroy the vcpu. Amusingly, this leaves
the redistributor registered with the KVM_MMIO bus.
This is no good, and we should properly clean the mess. Force
a teardown of the vgic vcpu interface, including the RD device
before returning to the caller.
A refcount issue can appeared in __fwnode_link_del() due to the
pr_debug() call:
WARNING: CPU: 0 PID: 901 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110
Call Trace:
<TASK>
...
of_node_get+0x1e/0x30
of_fwnode_get+0x28/0x40
fwnode_full_name_string+0x34/0x90
fwnode_string+0xdb/0x140
...
vsnprintf+0x17b/0x630
...
__fwnode_link_del+0x25/0xa0
fwnode_links_purge+0x39/0xb0
of_node_release+0xd9/0x180
...
Indeed, an fwnode (of_node) is being destroyed and so, of_node_release()
is called because the of_node refcount reached 0.
From of_node_release() several function calls are done and lead to
a pr_debug() calls with %pfwf to print the fwnode full name.
The issue is not present if we change %pfwf to %pfwP.
To print the full name, %pfwf iterates over the current node and its
parents and obtain/drop a reference to all nodes involved.
In order to allow to print the full name (%pfwf) of a node while it is
being destroyed, do not obtain/drop a reference to this current node.
Fixes: a92eb7621b9f ("lib/vsprintf: Make use of fwnode API to obtain node names and separators") Cc: stable@vger.kernel.org Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20231114152655.409331-1-herve.codina@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the hardware implementation of the I2C HID driver based on DesignWare
GPIO IRQ chip, when the user continues to use the I2C HID device in the
suspend process, the I2C HID interrupt will be masked after the resume
process is finished.
This is because the disable_irq()/enable_irq() of the DesignWare GPIO
driver does not synchronize the IRQ mask register state. In normal use
of the I2C HID procedure, the GPIO IRQ irq_mask()/irq_unmask() functions
are called in pairs. In case of an exception, i2c_hid_core_suspend()
calls disable_irq() to disable the GPIO IRQ. With low probability, this
causes irq_unmask() to not be called, which causes the GPIO IRQ to be
masked and not unmasked in enable_irq(), raising an exception.
Add synchronization to the masked register state in the
dwapb_irq_enable()/dwapb_irq_disable() function. mask the GPIO IRQ
before disabling it. After enabling the GPIO IRQ, unmask the IRQ.
Fixes: 7779b3455697 ("gpio: add a driver for the Synopsys DesignWare APB GPIO block") Cc: stable@kernel.org Co-developed-by: Riwen Lu <luriwen@kylinos.cn> Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Signed-off-by: xiongxin <xiongxin@kylinos.cn> Acked-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before
reset") caused a regression reproducable on omap4 duovero where the ISS
target module can produce interconnect errors on boot. Turns out the
registers are not accessible until after a delay for devices needing
a ti,sysc-delay-us value.
Let's fix this by flushing the posted write only after the reset delay.
We do flushing also for ti,sysc-delay-us using devices as that should
trigger an interconnect error if the delay is not properly configured.
Let's also add some comments while at it.
Fixes: 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before reset") Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The synth_event_gen_test module can be built in, if someone wants to run
the tests at boot up and not have to load them.
The synth_event_gen_test_init() function creates and enables the synthetic
events and runs its tests.
The synth_event_gen_test_exit() disables the events it created and
destroys the events.
If the module is builtin, the events are never disabled. The issue is, the
events should be disable after the tests are run. This could be an issue
if the rest of the boot up tests are enabled, as they expect the events to
be in a known state before testing. That known state happens to be
disabled.
When CONFIG_SYNTH_EVENT_GEN_TEST=y and CONFIG_EVENT_TRACE_STARTUP_TEST=y
a warning will trigger:
This is because the synth_event_gen_test_init() left the synthetic events
that it created enabled. By having it disable them after testing, the
other selftests will run fine.
Link: https://lore.kernel.org/linux-trace-kernel/20231220111525.2f0f49b0@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 9fe41efaca084 ("tracing: Add synth event generation test module") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reported-by: Alexander Graf <graf@amazon.com> Tested-by: Alexander Graf <graf@amazon.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 8930a6c20791 ("scsi: core: add support for request batching") the
block layer bd->last flag was mapped to SCMD_LAST and used as an indicator
to send the batch for the drivers that implement this feature. However, the
error handling code was not updated accordingly.
scsi_send_eh_cmnd() is used to send error handling commands and request
sense. The problem is that request sense comes as a single command that
gets into the batch queue and times out. As a result the device goes
offline after several failed resets. This was observed on virtio_scsi
during a device resize operation.
To fix this always set SCMD_LAST flag in scsi_send_eh_cmnd() and
scsi_reset_ioctl().
Fixes: 8930a6c20791 ("scsi: core: add support for request batching") Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Atanasov <alexander.atanasov@virtuozzo.com> Link: https://lore.kernel.org/r/20231215121008.2881653-1-alexander.atanasov@virtuozzo.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a bug in the ks8851 Ethernet driver that more data is written
to the hardware TX buffer than actually available. This is caused by
wrong accounting of the free TX buffer space.
The driver maintains a tx_space variable that represents the TX buffer
space that is deemed to be free. The ks8851_start_xmit_spi() function
adds an SKB to a queue if tx_space is large enough and reduces tx_space
by the amount of buffer space it will later need in the TX buffer and
then schedules a work item. If there is not enough space then the TX
queue is stopped.
The worker function ks8851_tx_work() dequeues all the SKBs and writes
the data into the hardware TX buffer. The last packet will trigger an
interrupt after it was send. Here it is assumed that all data fits into
the TX buffer.
In the interrupt routine (which runs asynchronously because it is a
threaded interrupt) tx_space is updated with the current value from the
hardware. Also the TX queue is woken up again.
Now it could happen that after data was sent to the hardware and before
handling the TX interrupt new data is queued in ks8851_start_xmit_spi()
when the TX buffer space had still some space left. When the interrupt
is actually handled tx_space is updated from the hardware but now we
already have new SKBs queued that have not been written to the hardware
TX buffer yet. Since tx_space has been overwritten by the value from the
hardware the space is not accounted for.
Now we have more data queued then buffer space available in the hardware
and ks8851_tx_work() will potentially overrun the hardware TX buffer. In
many cases it will still work because often the buffer is written out
fast enough so that no overrun occurs but for example if the peer
throttles us via flow control then an overrun may happen.
This can be fixed in different ways. The most simple way would be to set
tx_space to 0 before writing data to the hardware TX buffer preventing
the queuing of more SKBs until the TX interrupt has been handled. I have
chosen a slightly more efficient (and still rather simple) way and
track the amount of data that is already queued and not yet written to
the hardware. When new SKBs are to be queued the already queued amount
of data is honoured when checking free TX buffer space.
I tested this with a setup of two linked KS8851 running iperf3 between
the two in bidirectional mode. Before the fix I got a stall after some
minutes. With the fix I saw now issues anymore after hours.
Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver") Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231214181112.76052-1-rwahl@gmx.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the undefined usage of the GPIO consumer API after retrieving the
GPIO description with GPIO_ASIS. The API documentation mentions that
GPIO_ASIS won't set a GPIO direction and requires the user to set a
direction before using the GPIO.
This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer
able to enabled/disable a device, presumably because the GPIO controller
was never configured for the output direction.
Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe") Cc: stable@vger.kernel.org Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If some of p9pdu_readf() calls inside case 'T' in p9pdu_vreadf() fails,
the error path is not handled properly. *wnames or members of *wnames
array may be left uninitialized and invalidly freed.
Initialize *wnames to NULL in beginning of case 'T'. Initialize the first
*wnames array element to NULL and nullify the failing *wnames element so
that the error path freeing loop stops on the first NULL element and
doesn't proceed further.
Found by Linux Verification Center (linuxtesting.org).
Fixes: ace51c4dd2f9 ("9p: add new protocol support code") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Message-ID: <20231206200913.16135-1-pchelkin@ispras.ru> Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key
down on first press and a key up on 2nd press. Therefor the switch event
is used here. Besides this behaviour it uses the HID usage-id 0xc6
(Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but
since neither 0xc6 nor 0xc8 are currently implemented at all in
soc_button_array this not to standard behaviour is not put behind a quirk
for the moment.
If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.
Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.
SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5F:5C:07:37:47:D5 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5E:03:1C:00:38:21 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
Store hint: Yes (0x01)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
Cc: stable@vger.kernel.org Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L2CAP/COS/CED/BI-02-C PTS test send a malformed L2CAP signaling packet
with 2 commands in it (a connection request and an unknown command) and
expect to get a connection response packet and a command reject packet.
The second is currently not sent.
Cc: stable@vger.kernel.org Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.
Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file for the new certificate (Chen-Yu Tsai's) didn't
end with a comma, so depending on the file order in the
build rule, we'd end up with invalid C when concatenating
the (now two) certificates. Fix that.
Cc: stable@vger.kernel.org Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: fb768d3b13ff ("wifi: cfg80211: Add my certificate") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As announced [1][2], I have taken over maintainership of the
wireless-regdb project.
Add my certificate so that newer releases are valid to the kernel.
Seth's certificate should be kept around for awhile, at least until
a few new releases by me happen.
This should also be applied to stable trees so that stable kernels
can utilize newly released database binaries.
Increase the quirk delay from 2 seconds to 4 seconds. This reflects a
change in the Windows driver in which the delay was increased to about
3.7 seconds. The larger delay fixes an issue where the device fails to
work unless it was powered up early during boot.
Also clarify in the quirk comment that the quirk is only applied to
older devices (USB ID 07fd:0008).
Commit ee708e6baacd ("iio: buffer: introduce support for attaching more
IIO buffers") introduced support for multiple buffers per indio_dev but
left indio_dev->buffer for a few legacy use cases.
In the case of the triggered buffer, iio_triggered_buffer_cleanup()
still assumes that indio_dev->buffer points to the buffer allocated by
iio_triggered_buffer_setup_ext(). However, since
iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer()
to attach the buffer, indio_dev->buffer will only point to the buffer
allocated by iio_device_attach_buffer() if it the first buffer attached.
This adds a check to make sure that no other buffer has been attached
yet to ensure that indio_dev->buffer will be assigned when
iio_device_attach_buffer() is called.
As per discussion in the review thread, we may want to deal with multiple
triggers per device, but this is a fix for the issue in the meantime and
any such support would be unlikely to be suitable for a backport.
Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers") Signed-off-by: David Lechner <dlechner@baylibre.com> Acked-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix wrong handling of a DMA request where the probing only failed
if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV
value is returned. This makes DMAs explicitly optional. Even if the
DMA request is unsuccessfully, the ADC can still work properly.
We do also handle the defer probe case by making use of dev_err_probe().
The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are
associated to an index that is used to select the right measurement
resolution and its corresponding measurement time. The current
implementation selects the measurement resolution and the temperature
measurement time properly, but it does not select the right humidity
measurement time in all cases.
In summary, the 40 and 70 humidity measurement times are swapped.
The reason for that is probably the unusual coding for the measurement
resolution. According to the datasheet, the bits [7,0] of the "user
register" are used as follows to select the bit resolution:
--------------------------------------------------
| Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) |
--------------------------------------------------
| 0 | 0 | 12 | 14 | 16000 | 50000 |
--------------------------------------------------
| 0 | 1 | 8 | 12 | 3000 | 13000 |
--------------------------------------------------
| 1 | 0 | 10 | 13 | 5000 | 25000 |
--------------------------------------------------
| 1 | 1 | 11 | 11 | 8000 | 7000 |
--------------------------------------------------
*This table is available in the official datasheet, page 13/21. I have
just appended the times provided in the humidity/temperature tables,
pages 3/21, 5/21. Note that always a pair of resolutions is selected.
The sampling frequencies [20, 40, 70, 120] are assigned to a linear
index [0..3] which is then coded as follows [1]:
That is done that way because the temperature measurements are being
used as the reference for the sampling frequency (the frequencies and
the temperature measurement times are correlated), so increasing the
index always reduces the temperature measurement time and its
resolution. Therefore, the temperature measurement time array is as
simple as [50000, 25000, 13000, 7000]
On the other hand, the humidity resolution cannot follow the same
pattern because of the way it is coded in the "user register", where
both resolutions are selected at the same time. The humidity measurement
time array is the following: [16000, 3000, 5000, 8000], which defines
the following assignments:
The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0],
which is not the case for the reason explained above.
So a simple modification is required to obtain the right humidity
measurement time array, swapping the values in the positions 1 and 2.
The right table should be the following: [16000, 5000, 3000, 8000]
Fix the humidity measurement time array with the right idex/value
coding.
[1] The actual code that makes this coding and assigns it to the current
value of the "user register" is the following:
config_reg &= 0x7E;
config_reg |= ((i & 1) << 7) + ((i & 2) >> 1);
Fixes: d574a87cc311 ("Add meas-spec sensors common part") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb_share_check() already drops the reference to the skb when returning
NULL. Using kfree_skb() in the error handling path leads to an skb double
free.
Fix this by removing the variable tmp_skb, and return directly when
skb_share_check() returns NULL.
Fixes: 01a4cc4d0cd6 ("bnx2fc: do not add shared skbs to the fcoe_rx_list") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20221114110626.526643-1-weiyongjun@huaweicloud.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check the return value of i2c_add_adapter. Static analysis revealed that
the function did not properly handle potential failures of
i2c_add_adapter, which could lead to partial initialization of the I2C
adapter and unstable operation.
Signed-off-by: Haoran Liu <liuhaoran14@163.com> Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com Fixes: d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
