Linus Torvalds [Wed, 26 Nov 2025 21:16:22 +0000 (13:16 -0800)]
Merge tag 'trace-ringbuffer-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Do not allow mmapped ring buffer to be split
When the ring buffer VMA is split by a partial munmap or a MAP_FIXED,
the kernel calls vm_ops->close() on each portion. This causes the
ring_buffer_unmap() to be called multiple times. This causes
subsequent calls to return -ENODEV and triggers a warning.
There's no reason to allow user space to split up memory mapping of
the ring buffer. Have it return -EINVAL when that happens.
* tag 'trace-ringbuffer-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs
Linus Torvalds [Wed, 26 Nov 2025 20:38:05 +0000 (12:38 -0800)]
Merge tag 'mm-hotfixes-stable-2025-11-26-11-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"8 hotfixes. 4 are cc:stable, 7 are against mm/.
All are singletons - please see the respective changelogs for details"
* tag 'mm-hotfixes-stable-2025-11-26-11-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/filemap: fix logic around SIGBUS in filemap_map_pages()
mm/huge_memory: fix NULL pointer deference when splitting folio
MAINTAINERS: add test_kho to KHO's entry
mailmap: add entry for Sam Protsenko
selftests/mm: fix division-by-zero in uffd-unit-tests
mm/mmap_lock: reset maple state on lock_vma_under_rcu() retry
mm/memfd: fix information leak in hugetlb folios
mm: swap: remove duplicate nr_swap_pages decrement in get_swap_page_of_type()
Linus Torvalds [Wed, 26 Nov 2025 20:31:48 +0000 (12:31 -0800)]
Fix Intel Dollar Cove TI battery driver 32-bit build error
The driver is doing a 64-bit divide, rather than using the proper
helpers, causing link errors on i386 allyesconfig builds:
x86_64-linux-ld: drivers/power/supply/intel_dc_ti_battery.o: in function `dc_ti_battery_get_voltage_and_current_now':
intel_dc_ti_battery.c:(.text+0x5c): undefined reference to `__udivdi3'
x86_64-linux-ld: intel_dc_ti_battery.c:(.text+0x96): undefined reference to `__udivdi3'
and while fixing that, fix the double rounding: keep the timing
difference in nanoseconds ('ktime'), and then just convert to usecs at
the end.
Not because the timing precision is likely to matter, but because doing
it right also makes the code simpler.
Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Hans de Goede <hansg@kernel.org> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 26 Nov 2025 20:11:28 +0000 (12:11 -0800)]
Increase the default 32-bit build frame size warning limit to 1280 bytes
That was already the limit with KASAN enabled, and the 32-bit x86 build
ends up having a couple of drm cases that have stack frames _just_ over
1kB on my allmodconfig test. So the minimal fix for this build issue
for now is to just bump the limit and make it independent of KASAN.
[ Side note: XTENSA already used 1.5k and PARISC uses 2k, so 1280 is
still relatively conservative ]
Linus Torvalds [Wed, 26 Nov 2025 18:33:32 +0000 (10:33 -0800)]
Merge tag 'sound-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific and
trivial, mostly HD-audio and USB-audio quirks and fixups"
* tag 'sound-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add quirk for HP ProBook 450 G8
ALSA: usb-audio: fix uac2 clock source at terminal parser
ALSA: hda/realtek: add quirk for HP pavilion aero laptop 13z-be200
ALSA: hda/cirrus fix cs420x MacPro 6,1 inverted jack detection
ALSA: usb-audio: Add DSD quirk for LEAK Stereo 230
ALSA: au88x0: Fix incorrect error handling for PCI config reads
Linus Torvalds [Wed, 26 Nov 2025 18:17:10 +0000 (10:17 -0800)]
Merge tag 'acpi-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a commit that attempted to make the code in the ACPI processor
driver more straightforward, but it turned out to cause the kernel to
crash on at least one system, along with some further cleanups on top
of it"
* tag 'acpi-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: processor: idle: Optimize ACPI idle driver registration"
Revert "ACPI: processor: Remove unused empty stubs of some functions"
Revert "ACPI: processor: idle: Rearrange declarations in header file"
Revert "ACPI: processor: idle: Redefine two functions as void"
Revert "ACPI: processor: Do not expose global variable acpi_idle_driver"
Ilyas Gasanov [Tue, 25 Nov 2025 23:54:41 +0000 (03:54 +0400)]
ALSA: hda/realtek: Add quirk for HP ProBook 450 G8
My laptop, HP ProBook 450 G8 (32M40EA), has Realtek ALC236 codec on its
integrated sound card, and uses GPIO pins 0x2 and 0x1 for speaker mute
and mic mute LEDs correspondingly, as found out by me through hda-verb
invocations. This matches the GPIO masks used by the
alc236_fixup_hp_gpio_led() function.
PCI subsystem vendor and device IDs happen to be 0x103c and 0x8a75,
which has not been covered in the ALC2xx driver code yet.
Paulo Alcantara [Mon, 24 Nov 2025 20:00:36 +0000 (17:00 -0300)]
smb: client: fix memory leak in cifs_construct_tcon()
When having a multiuser mount with domain= specified and using
cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname,
so it needs to be freed before leaving cifs_construct_tcon().
This fixes the following memory leak reported by kmemleak:
Fixes: f2aee329a68f ("cifs: set domainName when a domain-key is used in multiuser") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Reviewed-by: David Howells <dhowells@redhat.com> Cc: Jay Shin <jaeshin@redhat.com> Cc: stable@vger.kernel.org Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs
When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel
calls vm_ops->close on each portion. For trace buffer mappings, this
results in ring_buffer_unmap() being called multiple times while
ring_buffer_map() was only called once.
This causes ring_buffer_unmap() to return -ENODEV on subsequent calls
because user_mapped is already 0, triggering a WARN_ON.
Trace buffer mappings cannot support partial mappings because the ring
buffer structure requires the complete buffer including the meta page.
Fix this by adding a may_split callback that returns -EINVAL to prevent
VMA splits entirely.
Cc: stable@vger.kernel.org Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer") Link: https://patch.msgid.link/20251119064019.25904-1-kartikey406@gmail.com Closes: https://syzkaller.appspot.com/bug?extid=a72c325b042aae6403c7 Tested-by: syzbot+a72c325b042aae6403c7@syzkaller.appspotmail.com Reported-by: syzbot+a72c325b042aae6403c7@syzkaller.appspotmail.com Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Tue, 25 Nov 2025 16:36:03 +0000 (08:36 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a revert due to one of the recent CCA commits breaking ACPI
firmware-based error reporting, a fix for a hard-lockup introduced by
a prior fix affecting non-default (CONFIG_EXPERT) configurations and
another ACPI fix for systems using MMIO-based timers.
Other than that, we're looking pretty good.
- Avoid hardlockup when CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=n
- Fix regression in APEI/GHES error handling
- Fix MMIO timers when probed via ACPI"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Fix hard lockup when !MITIGATE_SPECTRE_BRANCH_HISTORY
ACPI: GTDT: Correctly number platform devices for MMIO timers
Revert "arm64: acpi: Enable ACPI CCEL support"
Revert commit 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle
driver registration") because it is reported to introduce a cpuidle
regression leading to a kernel crash on a platform using the ACPI idle
driver.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-by: Borislav Petkov <bp@alien8.de> Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Closes: https://lore.kernel.org/lkml/20251124200019.GIaSS5U9HhsWBotrQZ@fat_crate.local/
René Rebe [Tue, 25 Nov 2025 14:41:49 +0000 (15:41 +0100)]
ALSA: usb-audio: fix uac2 clock source at terminal parser
Since 8b3a087f7f65 ("ALSA: usb-audio: Unify virtual type units type to
UAC3 values") usb-audio is using UAC3_CLOCK_SOURCE instead of
bDescriptorSubtype, later refactored with e0ccdef9265 ("ALSA: usb-audio:
Clean up check_input_term()") into parse_term_uac2_clock_source().
This breaks the clock source selection for at least my
1397:0003 BEHRINGER International GmbH FCA610 Pro.
Fix by using UAC2_CLOCK_SOURCE in parse_term_uac2_clock_source().
Kiryl Shutsemau [Thu, 20 Nov 2025 16:14:11 +0000 (16:14 +0000)]
mm/filemap: fix logic around SIGBUS in filemap_map_pages()
Chris noticed that filemap_map_pages() calculates can_map_large only once
for the first page in the fault around range. The value is not valid for
the following pages in the range and must be recalculated.
Instead of recalculating can_map_large on each iteration, pass down
file_end to filemap_map_folio_range() and let it make the decision on what
can be mapped.
Link: https://lkml.kernel.org/r/20251120161411.859078-1-kirill@shutemov.name Fixes: 74207de2ba10 ("mm/memory: do not populate page table entries beyond i_size")h Signed-off-by: Kiryl Shutsemau <kas@kernel.org> Reported-by: Chris Mason <clm@meta.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Mason <clm@meta.com> Cc: Christian Brauner <brauner@kernel.org> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wei Yang [Wed, 19 Nov 2025 23:53:02 +0000 (23:53 +0000)]
mm/huge_memory: fix NULL pointer deference when splitting folio
Commit c010d47f107f ("mm: thp: split huge page to any lower order pages")
introduced an early check on the folio's order via mapping->flags before
proceeding with the split work.
This check introduced a bug: for shmem folios in the swap cache and
truncated folios, the mapping pointer can be NULL. Accessing
mapping->flags in this state leads directly to a NULL pointer dereference.
This commit fixes the issue by moving the check for mapping != NULL before
any attempt to access mapping->flags.
Link: https://lkml.kernel.org/r/20251119235302.24773-1-richard.weiyang@gmail.com Fixes: c010d47f107f ("mm: thp: split huge page to any lower order pages") Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pratyush Yadav [Tue, 18 Nov 2025 18:24:15 +0000 (19:24 +0100)]
MAINTAINERS: add test_kho to KHO's entry
Commit b753522bed0b7 ("kho: add test for kexec handover") introduced the
KHO test but missed adding it to KHO's MAINTAINERS entry. Add it so the
KHO maintainers can get patches for its test.
Link: https://lkml.kernel.org/r/20251118182416.70660-1-pratyush@kernel.org Fixes: b753522bed0b7 ("kho: add test for kexec handover") Signed-off-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Graf <graf@amazon.com> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Carlos Llamas [Thu, 13 Nov 2025 03:46:22 +0000 (03:46 +0000)]
selftests/mm: fix division-by-zero in uffd-unit-tests
Commit 4dfd4bba8578 ("selftests/mm/uffd: refactor non-composite global
vars into struct") moved some of the operations previously implemented in
uffd_setup_environment() earlier in the main test loop.
The calculation of nr_pages, which involves a division by page_size, now
occurs before checking that default_huge_page_size() returns a non-zero
This leads to a division-by-zero error on systems with !CONFIG_HUGETLB.
Fix this by relocating the non-zero page_size check before the nr_pages
calculation, as it was originally implemented.
Link: https://lkml.kernel.org/r/20251113034623.3127012-1-cmllamas@google.com Fixes: 4dfd4bba8578 ("selftests/mm/uffd: refactor non-composite global vars into struct") Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Ujwal Kundur <ujwal.kundur@gmail.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam R. Howlett [Tue, 11 Nov 2025 21:56:05 +0000 (16:56 -0500)]
mm/mmap_lock: reset maple state on lock_vma_under_rcu() retry
The retry in lock_vma_under_rcu() drops the rcu read lock before
reacquiring the lock and trying again. This may cause a use-after-free if
the maple node the maple state was using was freed.
The maple state is protected by the rcu read lock. When the lock is
dropped, the state cannot be reused as it tracks pointers to objects that
may be freed during the time where the lock was not held.
Any time the rcu read lock is dropped, the maple state must be
invalidated. Resetting the address and state to MA_START is the safest
course of action, which will result in the next operation starting from
the top of the tree.
Prior to commit 0b16f8bed19c ("mm: change vma_start_read() to drop RCU
lock on failure"), vma_start_read() would drop rcu read lock and return
NULL, so the retry would not have happened. However, now that
vma_start_read() drops rcu read lock on failure followed by a retry, we
may end up using a freed maple tree node cached in the maple state.
[surenb@google.com: changelog alteration] Link: https://lkml.kernel.org/r/CAJuCfpEWMD-Z1j=nPYHcQW4F7E2Wka09KTXzGv7VE7oW1S8hcw@mail.gmail.com Link: https://lkml.kernel.org/r/20251111215605.1721380-1-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Fixes: 0b16f8bed19c ("mm: change vma_start_read() to drop RCU lock on failure") Reported-by: syzbot+131f9eb2b5807573275c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=131f9eb2b5807573275c Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When allocating hugetlb folios for memfd, three initialization steps are
missing:
1. Folios are not zeroed, leading to kernel memory disclosure to userspace
2. Folios are not marked uptodate before adding to page cache
3. hugetlb_fault_mutex is not taken before hugetlb_add_to_page_cache()
The memfd allocation path bypasses the normal page fault handler
(hugetlb_no_page) which would handle all of these initialization steps.
This is problematic especially for udmabuf use cases where folios are
pinned and directly accessed by userspace via DMA.
Fix by matching the initialization pattern used in hugetlb_no_page():
- Zero the folio using folio_zero_user() which is optimized for huge pages
- Mark it uptodate with folio_mark_uptodate()
- Take hugetlb_fault_mutex before adding to page cache to prevent races
The folio_zero_user() change also fixes a potential security issue where
uninitialized kernel memory could be disclosed to userspace through read()
or mmap() operations on the memfd.
Link: https://lkml.kernel.org/r/20251112145034.2320452-1-kartikey406@gmail.com Fixes: 89c1905d9c14 ("mm/gup: introduce memfd_pin_folios() for pinning memfd folios") Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Reported-by: syzbot+f64019ba229e3a5c411b@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/20251112031631.2315651-1-kartikey406@gmail.com/ Closes: https://syzkaller.appspot.com/bug?extid=f64019ba229e3a5c411b Suggested-by: Oscar Salvador <osalvador@suse.de> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: syzbot+f64019ba229e3a5c411b@syzkaller.appspotmail.com Acked-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> (v2) Cc: Christoph Hellwig <hch@lst.de> (v6) Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Youngjun Park [Sun, 2 Nov 2025 08:24:56 +0000 (17:24 +0900)]
mm: swap: remove duplicate nr_swap_pages decrement in get_swap_page_of_type()
After commit 4f78252da887, nr_swap_pages is decremented in
swap_range_alloc(). Since cluster_alloc_swap_entry() calls
swap_range_alloc() internally, the decrement in get_swap_page_of_type()
causes double-decrementing.
As a representative userspace-visible runtime example of the impact,
/proc/meminfo reports increasingly inaccurate SwapFree values. The
discrepancy grows with each swap allocation, and during hibernation
when large amounts of memory are written to swap, the reported value
can deviate significantly from actual available swap space, misleading
users and monitoring tools.
Remove the duplicate decrement.
Link: https://lkml.kernel.org/r/20251102082456.79807-1-youngjun.park@lge.com Fixes: 4f78252da887 ("mm: swap: move nr_swap_pages counter decrement from folio_alloc_swap() to swap_range_alloc()") Signed-off-by: Youngjun Park <youngjun.park@lge.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Barry Song <baohua@kernel.org> Reviewed-by: Kairui Song <kasong@tencent.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: <stable@vger.kernel.org> [6.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Mon, 24 Nov 2025 17:46:41 +0000 (09:46 -0800)]
Merge tag 'for-6.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-pcache fixes
- fix a regression with empty flush bios
- dm-verity: fix unreliable memory allocation with GFP_NOWAIT
* tag 'for-6.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-verity: fix unreliable memory allocation
dm: fix failure when empty flush's bi_sector points beyond the device end
dm-pcache: zero cache_info before default init
dm-pcache: reuse meta_addr in pcache_meta_find_latest
dm-pcache: allow built-in build and rename flush helper
Jonathan Marek [Mon, 17 Nov 2025 05:12:08 +0000 (00:12 -0500)]
arm64: proton-pack: Fix hard lockup when !MITIGATE_SPECTRE_BRANCH_HISTORY
The "drop print" commit removed the whole branch and not just the print.
For some ARM64 cpus, this leads to hard lockup when
CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not enabled.
Fixes: 62e72463ca71 ("arm64: proton-pack: Drop print when !CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Will Deacon <will@kernel.org>
Mauro reports that this breaks APEI notifications on his QEMU setup
because the "reserved for firmware" region still needs to be writable
by Linux in order to signal _back_ to the firmware after processing
the reported error:
This passes the address of the pointer "&punit_ipcdev" when the intent
was to pass the pointer itself "punit_ipcdev" (without the ampersand).
This means that the:
complete(&ipcdev->cmd_complete);
in intel_punit_ioc() will write to a wrong memory address corrupting it.
Fixes: fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aSCmoBipSQ_tlD-D@stanley.mountain Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Linus Torvalds [Sun, 23 Nov 2025 20:03:28 +0000 (12:03 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes for the Allwinner A523 clk driver:
- Lower the minimum rate for the A523 audio PLL to support
frequencies required by audio devices
- Mark a couple clks critical on A523 so that Linux doesn't turn them
off when they're used by other code like TF-A"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: sun55i-a523-ccu: Lower audio0 pll minimum rate
clk: sunxi-ng: sun55i-a523-r-ccu: Mark bus-r-dma as critical
clk: sunxi-ng: Mark A523 bus-r-cpucfg clock as critical
Linus Torvalds [Sun, 23 Nov 2025 16:23:30 +0000 (08:23 -0800)]
Merge tag 'timers-urgent-2025-11-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
- Fix a race in timer->function clearing in timer_shutdown_sync()
- Fix a timekeeper sysfs-setup resource leak in error paths
- Fix the NOHZ report_idle_softirq() syslog rate-limiting
logic to have no side effects on the return value
* tag 'timers-urgent-2025-11-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix NULL function pointer race in timer_shutdown_sync()
timekeeping: Fix resource leak in tk_aux_sysfs_init() error paths
tick/sched: Fix bogus condition in report_idle_softirq()
Yipeng Zou [Sat, 22 Nov 2025 09:39:42 +0000 (09:39 +0000)]
timers: Fix NULL function pointer race in timer_shutdown_sync()
There is a race condition between timer_shutdown_sync() and timer
expiration that can lead to hitting a WARN_ON in expire_timers().
The issue occurs when timer_shutdown_sync() clears the timer function
to NULL while the timer is still running on another CPU. The race
scenario looks like this:
CPU0 CPU1
<SOFTIRQ>
lock_timer_base()
expire_timers()
base->running_timer = timer;
unlock_timer_base()
[call_timer_fn enter]
mod_timer()
...
timer_shutdown_sync()
lock_timer_base()
// For now, will not detach the timer but only clear its function to NULL
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
[call_timer_fn exit]
lock_timer_base()
base->running_timer = NULL;
unlock_timer_base()
...
// Now timer is pending while its function set to NULL.
// next timer trigger
<SOFTIRQ>
expire_timers()
WARN_ON_ONCE(!fn) // hit
...
lock_timer_base()
// Now timer will detach
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
The problem is that timer_shutdown_sync() clears the timer function
regardless of whether the timer is currently running. This can leave a
pending timer with a NULL function pointer, which triggers the
WARN_ON_ONCE(!fn) check in expire_timers().
Fix this by only clearing the timer function when actually detaching the
timer. If the timer is running, leave the function pointer intact, which is
safe because the timer will be properly detached when it finishes running.
Fixes: 0cc04e80458a ("timers: Add shutdown mechanism to the internal functions") Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251122093942.301559-1-zouyipeng@huawei.com
Linus Torvalds [Sat, 22 Nov 2025 19:53:53 +0000 (11:53 -0800)]
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix another KMSAN warning that made it in while KMSAN wasn't working
reliably"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: tests: Fix KMSAN warning in test_sha256_finup_2x()
Linus Torvalds [Sat, 22 Nov 2025 18:16:21 +0000 (10:16 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One target driver fix and one scsi-generic one. The latter is 10 lines
because the problem lock has to be dropped and re-taken around the
call causing the sleep in atomic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: Do not sleep in atomic context
scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show()
Linus Torvalds [Sat, 22 Nov 2025 17:58:41 +0000 (09:58 -0800)]
Merge tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003
Linus Torvalds [Sat, 22 Nov 2025 17:44:50 +0000 (09:44 -0800)]
Merge tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Correct the MIPS RISC-V/JEDEC vendor ID
- Fix the system shutdown behavior in the legacy case where
CONFIG_RISCV_SBI_V01 is set, but the firmware implementation
doesn't support the older v0.1 system shutdown method
- Align some tools/ macro definitions with the corresponding
kernel headers
* tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
tools: riscv: Fixed misalignment of CSR related definitions
riscv: sbi: Prefer SRST shutdown over legacy
riscv: Update MIPS vendor id to 0x127
Linus Torvalds [Sat, 22 Nov 2025 17:24:36 +0000 (09:24 -0800)]
Merge tag 'selinux-pr-20251121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Three SELinux patches for v6.18 to fix issues around accessing the
per-task decision cache that we introduced in v6.16 to help reduce
SELinux overhead on path walks. The problem was that despite the cache
being located in the SELinux "task_security_struct", the parent struct
wasn't actually tied to the task, it was tied to a cred.
Historically SELinux did locate the task_security_struct in the
task_struct's security blob, but it was later relocated to the cred
struct when the cred work happened, as it made the most sense at the
time.
Unfortunately we never did the task_security_struct to
cred_security_struct rename work (avoid code churn maybe? who knows)
because it didn't really matter at the time. However, it suddenly
became a problem when we added a per-task cache to a per-cred object
and didn't notice because of the old, no-longer-correct struct naming.
Thanks to KCSAN for flagging this, as the silly humans running things
forgot that the task_security_struct was a big lie.
This contains three patches, only one of which actually fixes the
problem described above and moves the SELinux decision cache from the
per-cred struct to a newly (re)created per-task struct.
The other two patches, which form the bulk of the diffstat, take care
of the associated renaming tasks so we can hopefully avoid making the
same stupid mistake in the future.
For the record, I did contemplate sending just a fix for the cache,
leaving the renaming patches for the upcoming merge window, but the
type/variable naming ended up being pretty awful and would have made
v6.18 an outlier stuck between the "old" names and the "new" names in
v6.19. The renaming patches are also fairly mechanical/trivial and
shouldn't pose much risk despite their size.
TLDR; naming things may be hard, but if you mess it up bad things
happen"
* tag 'selinux-pr-20251121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: rename the cred_security_struct variables to "crsec"
selinux: move avdcache to per-task security struct
selinux: rename task_security_struct to cred_security_struct
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that struct iommufd_vevent is a flexible
structure, this is a structure that contains a flexible-array
member.
Fix the following warning:
drivers/iommu/iommufd/iommufd_private.h:621:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://patch.msgid.link/r/aRHOAwpATIE0oajj@kspp Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Fixes: e36ba5ab808e ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC") Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd/driver: Fix counter initialization for counted_by annotation
One of the requirements for counted_by annotations is that the counter
member must be initialized before the first reference to the
flexible-array member.
Move the vevent->data_len = data_len; initialization to before the
first access to flexible array vevent->event_data.
Link: https://patch.msgid.link/r/aRL7ZFFqM5bRTd2D@kspp Cc: stable@vger.kernel.org Fixes: e8e1ef9b77a7 ("iommufd/viommu: Add iommufd_viommu_report_event helper") Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Linus Torvalds [Fri, 21 Nov 2025 19:16:14 +0000 (11:16 -0800)]
Merge tag 'loongarch-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Use UAPI types in ptrace UAPI header to fix nolibc ptrace.
Fix CPU name display, NUMA node parsing, kexec/kdump, PCI init and BPF
trampoline"
* tag 'loongarch-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: BPF: Disable trampoline for kernel module function trace
LoongArch: Don't panic if no valid cache info for PCI
LoongArch: Mask all interrupts during kexec/kdump
LoongArch: Fix NUMA node parsing with numa_memblks
LoongArch: Consolidate CPU names in /proc/cpuinfo
LoongArch: Use UAPI types in ptrace UAPI header
Linus Torvalds [Fri, 21 Nov 2025 19:14:21 +0000 (11:14 -0800)]
Merge tag 'v6.18-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix potential memory leak in mount
- Add some missing read tracepoints
- Fix locking issue with directory leases
* tag 'v6.18-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add the smb3_read_* tracepoints to SMB1
cifs: fix memory leak in smb3_fs_context_parse_param error path
smb: client: introduce close_cached_dir_locked()
Linus Torvalds [Fri, 21 Nov 2025 19:09:57 +0000 (11:09 -0800)]
Merge tag 'io_uring-6.18-20251120' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix for a mixup of arguments for the skb_queue_splice()
call, in the io_uring timestamp retrieval code"
* tag 'io_uring-6.18-20251120' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/cmd_net: fix wrong argument types for skb_queue_splice()
Linus Torvalds [Fri, 21 Nov 2025 18:59:35 +0000 (10:59 -0800)]
Merge tag 'block-6.18-20251120' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
"NVMe pull request via Keith:
- Admin queue use-after-free fix (Keith)
- Target authentication fix (Alistar)
- Multipath lockdeup fix (Shin'ichiro)
- FC transport teardown fixes (Ewan)"
* tag 'block-6.18-20251120' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()
nvme: nvme-fc: move tagset removal to nvme_fc_delete_ctrl()
nvme-multipath: fix lockdep WARN due to partition scan work
nvmet-auth: update sc_c in target host hash calculation
nvme: fix admin request_queue lifetime
Linus Torvalds [Fri, 21 Nov 2025 18:53:23 +0000 (10:53 -0800)]
Merge tag 'ata-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add a missing refcount decrement in ata_scsi_dev_rescan() when
the device or its queue is not running.
In the case where the device is running, the recount is already
decremented properly (Yihang Li)
- Generate the proper sense code for a Security locked device.
There was a regression caused by a recent change of how sense
data is generated for commands that did not provide any sense
data. This broke system suspend for Security locked devices.
Generate the sense data that the SCSI disk driver expects for a
Security locked device so that system suspend works again (me)
- Set capacity to zero for a Security locked device.
All I/O commands will be aborted by a Security locked device.
Thus, the block layer disk partition scanning will result in
a bunch of, for the user, confusing I/O errors in dmesg during
boot.
Since a Security locked device is unusable anyway, set the capacity
to zero, to avoid the disk partition scanning during boot. We still
create the block device in /dev such that the user may unlock the
device using e.g. hdparm (me)
* tag 'ata-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Set capacity to zero for a security locked drive
ata: libata-scsi: Fix system suspend for a security locked drive
ata: libata-scsi: Add missing scsi_device_put() in ata_scsi_dev_rescan()
Linus Torvalds [Fri, 21 Nov 2025 18:47:24 +0000 (10:47 -0800)]
Merge tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
Linus Torvalds [Fri, 21 Nov 2025 18:43:58 +0000 (10:43 -0800)]
Merge tag 'gpio-fixes-for-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a use-after-free bug in GPIO character device code
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: update my email address
gpio: cdev: make sure the cdev fd is still active before emitting events
Eric Biggers [Fri, 21 Nov 2025 03:34:31 +0000 (19:34 -0800)]
lib/crypto: tests: Fix KMSAN warning in test_sha256_finup_2x()
Fully initialize *ctx, including the buf field which sha256_init()
doesn't initialize, to avoid a KMSAN warning when comparing *ctx to
orig_ctx. This KMSAN warning slipped in while KMSAN was not working
reliably due to a stackdepot bug, which has now been fixed.
Linus Torvalds [Fri, 21 Nov 2025 17:55:55 +0000 (09:55 -0800)]
Merge tag 'drm-fixes-2025-11-21' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"A range of small fixes across the board, the i915 display
disambiguation is probably the biggest otherwise amdgpu and xe as
usual with tegra, nouveau, radeon and a core atomic fix.
Looks mostly normal.
atomic:
- Return error codes on failed blob creation for planes
nouveau:
- Fix memory leak
tegra:
- Fix device ref counting
- Fix pid ref counting
- Revert booting on Pixel C
xe:
- Fix out-of-bounds access with BIT()
- Fix kunit test checking wrong condition
- Drop duplicate kconfig select
- Fix guc2host irq handler with MSI-X
i915:
- Wildcat Lake and Panther Lake detangled for display fixes
* tag 'drm-fixes-2025-11-21' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/amdgpu: Add sriov vf check for VCN per queue reset support.
drm/amdgpu/ttm: Fix crash when handling MMIO_REMAP in PDE flags
drm/amdgpu/vm: Check PRT uAPI flag instead of PTE flag
drm/amdgpu: Skip emit de meta data on gfx11 with rs64 enabled
drm/amd: Skip power ungate during suspend for VPE
drm/plane: Fix create_in_format_blob() return value
drm/xe/irq: Handle msix vector0 interrupt
drm/xe: Remove duplicate DRM_EXEC selection from Kconfig
drm/xe/kunit: Fix forcewake assertion in mocs test
drm/xe: Prevent BIT() overflow when handling invalid prefetch region
drm/radeon: delete radeon_fence_process in is_signaled, no deadlock
drm/amd/display: Fix pbn to kbps Conversion
drm/amd/display: Clear the CUR_ENABLE register on DCN20 on DPP5
drm/amd/display: Add an HPD filter for HDMI
drm/amd/display: Increase DPCD read retries
drm/amd/display: Move sleep into each retry for retrieve_link_cap()
drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched
drm/i915/xe3: Restrict PTL intel_encoder_is_c10phy() to only PHY A
drm/i915/display: Add definition for wcl as subplatform
drm/pcids: Split PTL pciids group to make wcl subplatform
...
Linus Torvalds [Fri, 21 Nov 2025 17:29:02 +0000 (09:29 -0800)]
samples: work around glibc redefining some of our defines wrong
Apparently as of version 2.42, glibc headers define AT_RENAME_NOREPLACE
and some of the other flags for renameat2() and friends in <stdio.h>.
Which would all be fine, except for inexplicable reasons glibc decided
to define them _differently_ from the kernel definitions, which then
makes some of our sample code that includes both kernel headers and user
space headers unhappy, because the compiler will (correctly) complain
about redefining things.
Now, mixing kernel headers and user space headers is always a somewhat
iffy proposition due to namespacing issues, but it's kind of inevitable
in our sample and selftest code. And this is just glibc being stupid.
Those defines come from the kernel, glibc is exposing the kernel
interfaces, and glibc shouldn't make up some random new expressions for
these values.
It's not like glibc headers changed the actual result values, but they
arbitrarily just decided to use a different expression to describe those
values. The kernel just does
instead. Same value in the end, but very different macro definition.
For absolutely no reason.
This has since been fixed in the glibc development tree, so eventually
we'll end up with the canonical expressions and no clashes. But in the
meantime the broken headers are in the glibc-2.42 release and have made
it out into distributions.
Do a minimal work-around to make the samples build cleanly by just
undefining the affected macros in between the user space header include
and the kernel header includes.
platform: arm64: thinkpad-t14s-ec: sleep after EC access
The ACPI ECRD and ECWR functions have a 10ms sleep at the end. It turns
out, that this is sometimes needed to avoid I2C transmission failures,
especially for functions doing regmap_update_bits (and thus read + write
shortly after each other). This fixes problems like the following
appearing in the kernel log:
leds platform::micmute: Setting an LED's brightness failed (-6)
leds platform::kbd_backlight: Setting an LED's brightness failed (-6)
The ACPI QEVT function used to read the interrupt status register also
has a 10ms sleep at the end. Without that there are problems with
reading multiple events following directly after each other resulting
in the following error message being logged:
Fix a race condition, that an input key related interrupt might be
triggered before the input handler has been registered, which results
in a NULL pointer dereference. This can happen if the user enables
the keyboard backlight shortly before the driver is being probed.
This fixes the following backtrace visible in dmesg:
Commit 69896119dc9d ("MIPS: vdso: Switch to generic storage
implementation") switches to a generic vdso storage, which increases
the number of data pages from 1 to 4. But there is only one page
reserved, which causes segementation faults depending where the VDSO
area is randomized to. To fix this use the same size of reservation
and allocation of the VDSO data pages.
Fixes: 69896119dc9d ("MIPS: vdso: Switch to generic storage implementation") Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS: mm: Prevent a TLB shutdown on initial uniquification
Depending on the particular CPU implementation a TLB shutdown may occur
if multiple matching entries are detected upon the execution of a TLBP
or the TLBWI/TLBWR instructions. Given that we don't know what entries
we have been handed we need to be very careful with the initial TLB
setup and avoid all these instructions.
Therefore read all the TLB entries one by one with the TLBR instruction,
bypassing the content addressing logic, and truncate any large pages in
place so as to avoid a case in the second step where an incoming entry
for a large page at a lower address overlaps with a replacement entry
chosen at another index. Then preinitialize the TLB using addresses
outside our usual unique range and avoiding clashes with any entries
received, before making the usual call to local_flush_tlb_all().
This fixes (at least) R4x00 cores if TLBP hits multiple matching TLB
entries (SGI IP22 PROM for examples sets up all TLBs to the same virtual
address).
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 35ad7e181541 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init") Cc: stable@vger.kernel.org Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # Boston I6400, M5150 sim Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Mikulas Patocka [Mon, 17 Nov 2025 20:42:02 +0000 (21:42 +0100)]
dm-verity: fix unreliable memory allocation
GFP_NOWAIT allocation may fail anytime. It needs to be changed to
GFP_NOIO. There's no need to handle an error because mempool_alloc with
GFP_NOIO can't fail.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Jacob Zhong [Fri, 21 Nov 2025 01:57:12 +0000 (09:57 +0800)]
ALSA: hda/realtek: add quirk for HP pavilion aero laptop 13z-be200
The laptop uses ALC287 chip (as shown in /proc/asound/card1/codec#0).
It seems that every HP pavilion laptop in the table uses the same quirk,
so I just copied them. I have verified that the mute LED on my laptop
works with this patch.
Paul Moore [Tue, 18 Nov 2025 22:27:58 +0000 (17:27 -0500)]
selinux: rename the cred_security_struct variables to "crsec"
Along with the renaming from task_security_struct to cred_security_struct,
rename the local variables to "crsec" from "tsec". This both fits with
existing conventions and helps distinguish between task and cred related
variables.
No functional changes.
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
Stephen Smalley [Thu, 13 Nov 2025 20:23:14 +0000 (15:23 -0500)]
selinux: move avdcache to per-task security struct
The avdcache is meant to be per-task; move it to a new
task_security_struct that is duplicated per-task.
Cc: stable@vger.kernel.org Fixes: 5d7ddc59b3d89b724a5aa8f30d0db94ff8d2d93f ("selinux: reduce path walk overhead") Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: line length fixes] Signed-off-by: Paul Moore <paul@paul-moore.com>
Stephen Smalley [Thu, 13 Nov 2025 20:23:13 +0000 (15:23 -0500)]
selinux: rename task_security_struct to cred_security_struct
Before Linux had cred structures, the SELinux task_security_struct was
per-task and although the structure was switched to being per-cred
long ago, the name was never updated. This change renames it to
cred_security_struct to avoid confusion and pave the way for the
introduction of an actual per-task security structure for SELinux. No
functional change.
Cc: stable@vger.kernel.org Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
Linus Torvalds [Thu, 20 Nov 2025 19:04:37 +0000 (11:04 -0800)]
Merge tag 'sched_ext-for-6.18-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
"One low risk and obvious fix: scx_enable() was dereferencing an error
pointer on helper kthread creation failure. Fixed"
* tag 'sched_ext-for-6.18-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix scx_enable() crash on helper kthread creation failure
Mikulas Patocka [Thu, 20 Nov 2025 11:08:47 +0000 (12:08 +0100)]
dm: fix failure when empty flush's bi_sector points beyond the device end
An empty flush bio can have arbitrary bi_sector. The commit 2b1c6d7a890a
introduced a regression that device mapper would fail an empty flush bio
with -EIO if the sector pointed beyond the end of the device.
The commit introduced an optimization, that optimization would pass
flushes to __split_and_process_bio and __split_and_process_bio is not
prepared to handle empty bios. Fix this bug by passing only non-empty
flushes to __split_and_process_bio - non-empty flushes must have valid
bi_sector. Empty bios will go through __send_empty_flush, as they did
before the optimization.
This problem can be reproduced by running the lvm2 test:
make check_local T=lvconvert-thin.sh LVM_TEST_PREFER_BRD=0
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 2b1c6d7a890a ("dm: optimize REQ_PREFLUSH with data when using the linear target") Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org>
kthread_run_worker() returns an ERR_PTR() on failure rather than NULL,
but the current code in scx_alloc_and_add_sched() only checks for a NULL
helper. Incase of failure on SIGQUIT, the error is not handled in
scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an
error pointer.
Error handling is fixed in scx_alloc_and_add_sched() to propagate
PTR_ERR() into ret, so that scx_enable() jumps to the existing error
path, avoiding random dereference on failure.
Jens Axboe [Thu, 20 Nov 2025 18:40:15 +0000 (11:40 -0700)]
io_uring/cmd_net: fix wrong argument types for skb_queue_splice()
If timestamp retriving needs to be retried and the local list of
SKB's already has entries, then it's spliced back into the socket
queue. However, the arguments for the splice helper are transposed,
causing exactly the wrong direction of splicing into the on-stack
list. Fix that up.
Cc: stable@vger.kernel.org Reported-by: Google Big Sleep <big-sleep-vuln-reports+bigsleep-462435176@google.com> Fixes: 9e4ed359b8ef ("io_uring/netcmd: add tx timestamping cmd support") Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 20 Nov 2025 17:46:52 +0000 (09:46 -0800)]
Merge tag 'pm-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a regression introduced during the 6.16 development cycle that may
cause runtime PM to be enabled by mistake for devices that do not
support it (which may lead to some serious trouble) if there is a
system wakeup event during the "late suspend" phase of system suspend"
* tag 'pm-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Fix runtime PM enabling in device_resume_early()
Linus Torvalds [Thu, 20 Nov 2025 17:44:27 +0000 (09:44 -0800)]
Merge tag 'acpi-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes EINJV2 support introduced during the 6.17 cycle by
unbreaking the initialization broken by a previous attempted fix,
adding sanity checks for data coming from the platform firmware, and
updating the code to handle injecting legacy error types on an EINJV2
capable systems properly (Tony Luck)"
* tag 'acpi-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: APEI: EINJ: Fix EINJV2 initialization and injection
Linus Torvalds [Thu, 20 Nov 2025 17:39:34 +0000 (09:39 -0800)]
Merge tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"This one has lots of new HW entries which adds to the size in diffstat
but the individual changes are simple.
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant
entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI
whitelist
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support"
* tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
platform/x86: acer-wmi: Ignore backlight event
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
platform/x86/intel/hid: Add Nova Lake support
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile
platform/x86: msi-wmi-platform: Fix typo in WMI GUID
platform/x86: msi-wmi-platform: Only load on MSI devices
platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list
platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally
platform/x86/amd/pmc: Add support for Van Gogh SoC
platform/x86: alienware-wmi-wmax: Add support for the whole "G" family
platform/x86: alienware-wmi-wmax: Add support for the whole "X" family
platform/x86: alienware-wmi-wmax: Add support for the whole "M" family
platform/x86: alienware-wmi-wmax: Drop redundant DMI entries
platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order
platform/x86: ISST: isst_if.h: fix all kernel-doc warnings
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support
platform/x86: huawei-wmi: add keys for HONOR models
...
Linus Torvalds [Thu, 20 Nov 2025 16:52:07 +0000 (08:52 -0800)]
Merge tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
timekeeping: Fix resource leak in tk_aux_sysfs_init() error paths
tk_aux_sysfs_init() returns immediately on error during the auxiliary clock
initialization loop without cleaning up previously allocated kobjects and
sysfs groups.
If kobject_create_and_add() or sysfs_create_group() fails during loop
iteration, the parent kobjects (tko and auxo) and any previously created
child kobjects are leaked.
Fix this by adding proper error handling with goto labels to ensure all
allocated resources are cleaned up on failure. kobject_put() on the
parent kobjects will handle cleanup of their children.
Michal Luczaj [Wed, 19 Nov 2025 14:02:59 +0000 (15:02 +0100)]
vsock: Ignore signal/timeout on connect() if already established
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
Andrey Vatoropin [Wed, 19 Nov 2025 10:51:12 +0000 (10:51 +0000)]
be2net: pass wrb_params in case of OS2BMC
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit bc0c3405abbb ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
* tag 'nvme-6.18-2025-11-20' of git://git.infradead.org/nvme:
nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()
nvme: nvme-fc: move tagset removal to nvme_fc_delete_ctrl()
nvme-multipath: fix lockdep WARN due to partition scan work
nvmet-auth: update sc_c in target host hash calculation
nvme: fix admin request_queue lifetime
Niklas Cassel [Wed, 19 Nov 2025 14:13:15 +0000 (15:13 +0100)]
ata: libata-core: Set capacity to zero for a security locked drive
For Security locked drives (drives that have Security enabled, and have
not been Security unlocked by boot firmware), the automatic partition
scanning will result in the user being spammed with errors such as:
ata5.00: failed command: READ DMA
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
sd 4:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 4:0:0:0: [sda] tag#7 Sense Key : Aborted Command [current]
sd 4:0:0:0: [sda] tag#7 Add. Sense: No additional sense information
during boot, because most commands except for IDENTIFY will be aborted by
a Security locked drive.
For a Security locked drive, set capacity to zero, so that no automatic
partition scanning will happen.
If the user later unlocks the drive using e.g. hdparm, the close() by the
user space application should trigger a revalidation of the drive.
Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Niklas Cassel [Wed, 19 Nov 2025 14:13:14 +0000 (15:13 +0100)]
ata: libata-scsi: Fix system suspend for a security locked drive
Commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status
handling") fixed ata_to_sense_error() to properly generate sense key
ABORTED COMMAND (without any additional sense code), instead of the
previous bogus sense key ILLEGAL REQUEST with the additional sense code
UNALIGNED WRITE COMMAND, for a failed command.
However, this broke suspend for Security locked drives (drives that have
Security enabled, and have not been Security unlocked by boot firmware).
The reason for this is that the SCSI disk driver, for the Synchronize
Cache command only, treats any sense data with sense key ILLEGAL REQUEST
as a successful command (regardless of ASC / ASCQ).
After commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error()
status handling") the code that treats any sense data with sense key
ILLEGAL REQUEST as a successful command is no longer applicable, so the
command fails, which causes the system suspend to be aborted:
sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5
sd 1:0:0:0: PM: failed to suspend async: error -5
PM: Some devices failed to suspend, or early wake event detected
To make suspend work once again, for a Security locked device only,
return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense
data which a real SCSI device would have returned if locked.
The SCSI disk driver treats this sense data as a successful command.
Cc: stable@vger.kernel.org Reported-by: Ilia Baryshnikov <qwelias@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704 Fixes: cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling") Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Paolo Abeni [Thu, 20 Nov 2025 12:02:00 +0000 (13:02 +0100)]
Merge tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless-2025-11-20
A single fix for scanning on some rtw89 devices.
* tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: rtw89: hw_scan: Don't let the operating channel be last
====================
David Bauer [Tue, 18 Nov 2025 00:16:18 +0000 (01:16 +0100)]
l2tp: reset skb control buffer on xmit
The L2TP stack did not reset the skb control buffer before sending the
encapsulated package.
In a setup with an ath10k radio and batman-adv over an L2TP tunnel
massive fragmentations happen sporadically if the L2TP tunnel is
established over IPv4.
L2TP might reset some of the fields in the IP control buffer, but L2TP
assumes the type of the control buffer to be of an IPv4 packet.
In case the L2TP interface is used as a batadv hardif or the packet is
an IPv6 packet, this assumption breaks.
Clear the entire control buffer to avoid such mishaps altogether.
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the
new delay value. This caused the new value to be bitwise-OR'd with the
existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the
intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was
incorrectly OR'd with the default 0x1B (from register value 0xDA3),
leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the
correct delay value is written. Physical measurements on the RGMII TX
lines confirm the fix, showing the delay changing from ~1ns (before
change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing
tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa3f ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================
On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:
(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.
Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.
In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that.
Cc: stable@vger.kernel.org # v6.10 Fixes: 2651923d8d8db0 ("xfs: online repair of symbolic links") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Dapeng Mi [Wed, 12 Nov 2025 08:05:26 +0000 (16:05 +0800)]
perf: Fix 0 count issue of cpu-clock
Currently cpu-clock event always returns 0 count, e.g.,
perf stat -e cpu-clock -- sleep 1
Performance counter stats for 'sleep 1':
0 cpu-clock # 0.000 CPUs utilized
1.002308394 seconds time elapsed
The root cause is the commit 'bc4394e5e79c ("perf: Fix the throttle
error of some clock events")' adds PERF_EF_UPDATE flag check before
calling cpu_clock_event_update() to update the count, however the
PERF_EF_UPDATE flag is never set when the cpu-clock event is stopped in
counting mode (pmu->dev() -> cpu_clock_event_del() ->
cpu_clock_event_stop()). This leads to the cpu-clock event count is
never updated.
To fix this issue, force to set PERF_EF_UPDATE flag for cpu-clock event
just like what task-clock does.
Fixes: bc4394e5e79c ("perf: Fix the throttle error of some clock events") Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://patch.msgid.link/20251112080526.3971392-1-dapeng1.mi@linux.intel.com
David Howells [Fri, 24 Oct 2025 15:33:43 +0000 (16:33 +0100)]
cifs: Add the smb3_read_* tracepoints to SMB1
Add the smb3_read_* tracepoints to SMB1's cifs_async_readv() and
cifs_readv_callback().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Shaurya Rane [Tue, 18 Nov 2025 15:02:57 +0000 (20:32 +0530)]
cifs: fix memory leak in smb3_fs_context_parse_param error path
Add proper cleanup of ctx->source and fc->source to the
cifs_parse_mount_err error handler. This ensures that memory allocated
for the source strings is correctly freed on all error paths, matching
the cleanup already performed in the success path by
smb3_cleanup_fs_context_contents().
Pointers are also set to NULL after freeing to prevent potential
double-free issues.
This change fixes a memory leak originally detected by syzbot. The
leak occurred when processing Opt_source mount options if an error
happened after ctx->source and fc->source were successfully
allocated but before the function completed.
The specific leak sequence was:
1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory
2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory
3. A subsequent error jumps to cifs_parse_mount_err
4. The old error handler freed passwords but not the source strings,
causing the memory to leak.
This issue was not addressed by commit e8c73eb7db0a ("cifs: client:
fix memory leak in smb3_fs_context_parse_param"), which only fixed
leaks from repeated fsconfig() calls but not this error path.
Patch updated with minor change suggested by kernel test robot
Reported-by: syzbot+87be6809ed9bf6d718e3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=87be6809ed9bf6d718e3 Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in> Signed-off-by: Steve French <stfrench@microsoft.com>
Replace close_cached_dir() calls under cfid_list_lock with a new
close_cached_dir_locked() variant that uses kref_put() instead of
kref_put_lock() to avoid recursive locking when dropping references.
While the existing code works if the refcount >= 2 invariant holds,
this area has proven error-prone. Make deadlocks impossible and WARN
on invariant violations.
Cc: stable@vger.kernel.org Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Johannes Berg [Thu, 20 Nov 2025 08:43:24 +0000 (09:43 +0100)]
Merge tag 'rtw-2025-11-20' of https://github.com/pkshih/rtw
Ping-Ke Shih says:
==================
rtw patches for v6.18-rc7
Fix firmware goes wrong and causes device unusable after scanning. This
issue presents under certain regulatory domain reported from end users.
==================
Vincent Li [Thu, 20 Nov 2025 06:42:05 +0000 (14:42 +0800)]
LoongArch: BPF: Disable trampoline for kernel module function trace
The current LoongArch BPF trampoline implementation is incompatible
with tracing functions in kernel modules. This causes several severe
and user-visible problems:
* The `bpf_selftests/module_attach` test fails consistently.
* Kernel lockup when a BPF program is attached to a module function [1].
* Critical kernel modules like WireGuard experience traffic disruption
when their functions are traced with fentry [2].
Given the severity and the potential for other unknown side-effects, it
is safest to disable the feature entirely for now. This patch prevents
the BPF subsystem from allowing trampoline attachments to kernel module
functions on LoongArch.
This is a temporary mitigation until the core issues in the trampoline
code for kernel module handling can be identified and fixed.
Huacai Chen [Thu, 20 Nov 2025 06:42:05 +0000 (14:42 +0800)]
LoongArch: Don't panic if no valid cache info for PCI
If there is no valid cache info detected (may happen in virtual machine)
for pci_dfl_cache_line_size, kernel shouldn't panic. Because in the PCI
core it will be evaluated to (L1_CACHE_BYTES >> 2).
Cc: <stable@vger.kernel.org> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Thu, 20 Nov 2025 06:42:05 +0000 (14:42 +0800)]
LoongArch: Mask all interrupts during kexec/kdump
If the default state of the interrupt controllers in the first kernel
don't mask any interrupts, it may cause the second kernel to potentially
receive interrupts (which were previously allocated by the first kernel)
immediately after a CPU becomes online during its boot process. These
interrupts cannot be properly routed, leading to bad IRQ issues.
This patch calls machine_kexec_mask_interrupts() to mask all interrupts
during the kexec/kdump process.
Bibo Mao [Thu, 20 Nov 2025 06:42:05 +0000 (14:42 +0800)]
LoongArch: Fix NUMA node parsing with numa_memblks
On physical machine, NUMA node id comes from high bit 44:48 of physical
address. However it is not true on virt machine. With general method, it
comes from ACPI SRAT table.
Here the common function numa_memblks_init() is used to parse NUMA node
information with numa_memblks.
Cc: <stable@vger.kernel.org> Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Thomas Weißschuh [Thu, 20 Nov 2025 06:42:05 +0000 (14:42 +0800)]
LoongArch: Use UAPI types in ptrace UAPI header
The kernel UAPI headers already contain fixed-width integer types, there
is no need to rely on the libc types. There may not be a libc available
or the libc may not provides the <stdint.h>, like for example on nolibc.
This also aligns the header with the rest of the LoongArch UAPI headers.
Fixes: 803b0fc5c3f2 ("LoongArch: Add process management") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
projects / thirdparty / linux.git / log
