KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
Claudio Imbrenda [Thu, 26 Mar 2026 13:17:19 +0000 (14:17 +0100)]
KVM: s390: Fix KVM_S390_VCPU_FAULT ioctl
A previous commit changed the behaviour of the KVM_S390_VCPU_FAULT
ioctl. The current (wrong) implementation will trigger a guest
addressing exception if the requested address lies outside of a
memslot, unless the VM is UCONTROL.
Restore the previous behaviour by open coding the fault-in logic.
Fixes: 3762e905ec2e ("KVM: s390: use __kvm_faultin_pfn()") Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Claudio Imbrenda [Thu, 26 Mar 2026 13:17:18 +0000 (14:17 +0100)]
KVM: s390: vsie: Fix guest page tables protection
When shadowing, the guest page tables are write-protected, in order to
trap changes and properly unshadow the shadow mapping for the nested
guest. Already shadowed levels are skipped, so that only the needed
levels are write protected.
Currently the levels that get write protected are exactly one level too
deep: the last level (nested guest memory) gets protected in the wrong
way, and will be protected again correctly a few lines afterwards; most
importantly, the highest non-shadowed level does *not* get write
protected.
Moreover, if the nested guest is running in a real address space, there
are no DAT tables to shadow.
Write protect the correct levels, so that all the levels that need to
be protected are protected, and avoid double protecting the last level;
skip attempting to shadow the DAT tables when the nested guest is
running in a real address space.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap") Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Claudio Imbrenda [Thu, 26 Mar 2026 13:17:17 +0000 (14:17 +0100)]
KVM: s390: vsie: Fix unshadowing while shadowing
If shadowing causes the shadow gmap to get unshadowed, exit early to
prevent an attempt to dereference the parent pointer, which at this
point is NULL.
Opportunistically add some more checks to prevent NULL parents.
Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Fixes: e5f98a6899bd ("KVM: s390: Add some helper functions needed for vSIE") Fixes: e38c884df921 ("KVM: s390: Switch to new gmap") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Claudio Imbrenda [Thu, 26 Mar 2026 13:17:14 +0000 (14:17 +0100)]
KVM: s390: Correctly handle guest mappings without struct page
Introduce a new special softbit for large pages, like already presend
for normal pages, and use it to mark guest mappings that do not have
struct pages.
Whenever a leaf DAT entry becomes dirty, check the special softbit and
only call SetPageDirty() if there is an actual struct page.
Move the logic to mark pages dirty inside _gmap_ptep_xchg() and
_gmap_crstep_xchg_atomic(), to avoid needlessly duplicating the code.
Fixes: 5a74e3d93417 ("KVM: s390: KVM-specific bitfields and helper functions") Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Claudio Imbrenda [Thu, 26 Mar 2026 13:17:13 +0000 (14:17 +0100)]
KVM: s390: Fix gmap_link()
The slow path of the fault handler ultimately called gmap_link(), which
assumed the fault was a major fault, and blindly called dat_link().
In case of minor faults, things were not always handled properly; in
particular the prefix and vsie marker bits were ignored.
Move dat_link() into gmap.c, renaming it accordingly. Once moved, the
new _gmap_link() function will be able to correctly honour the prefix
and vsie markers.
This will cause spurious unshadows in some uncommon cases.
Claudio Imbrenda [Thu, 26 Mar 2026 13:17:12 +0000 (14:17 +0100)]
KVM: s390: vsie: Fix check for pre-existing shadow mapping
When shadowing a nested guest, a check is performed and no shadowing is
attempted if the nested guest is already shadowed.
The existing check was incomplete; fix it by also checking whether the
leaf DAT table entry in the existing shadow gmap has the same protection
as the one specified in the guest DAT entry.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap") Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Claudio Imbrenda [Thu, 26 Mar 2026 13:17:10 +0000 (14:17 +0100)]
KVM: s390: vsie: Fix dat_split_ste()
If the guest misbehaves and puts the page tables for its nested guest
inside the memory of the nested guest itself, and the guest and nested
guest are being mapped with large pages, the shadow mapping will
lose synchronization with the actual mapping, since this will cause the
large page with the vsie notification bit to be split, but the
vsie notification bit will not be propagated to the resulting small
pages.
Fix this by propagating the vsie_notif bit from large pages to normal
pages when splitting a large page.
Linus Torvalds [Thu, 26 Mar 2026 01:41:35 +0000 (18:41 -0700)]
Merge tag 'erofs-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Mark I/Os as failed when encountering short reads on file-backed
mounts
- Label GFP_NOIO in the BIO completion when the completion is in the
process context, and directly call into the decompression to avoid
deadlocks
- Improve Kconfig descriptions to better highlight the overall efforts
- Fix .fadvise() for page cache sharing
* tag 'erofs-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix .fadvise() for page cache sharing
erofs: update the Kconfig description
erofs: add GFP_NOIO in the bio completion if needed
erofs: set fileio bio failed in short read case
Linus Torvalds [Thu, 26 Mar 2026 01:14:19 +0000 (18:14 -0700)]
Merge tag 'rcu-fixes.v7.0-20260325a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fixes from Boqun Feng:
"Fix a regression introduced by commit c27cea4416a3 ("rcu: Re-implement
RCU Tasks Trace in terms of SRCU-fast"): BPF contexts can run with
preemption disabled or scheduler locks held, so call_srcu() must work
in all such contexts.
Fix this by converting SRCU's spinlocks to raw spinlocks and avoiding
scheduler lock acquisition in call_srcu() by deferring to an irq_work
(similar to call_rcu_tasks_generic()), for both tree SRCU and tiny
SRCU.
Also fix a follow-on lockdep splat caused by srcu_node allocation
under the newly introduced raw spinlock by deferring the allocation to
grace-period worker context"
* tag 'rcu-fixes.v7.0-20260325a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
srcu: Use irq_work to start GP in tiny SRCU
rcu: Use an intermediate irq_work to start process_srcu()
srcu: Push srcu_node allocation to GP when non-preemptible
srcu: Use raw spinlocks so call_srcu() can be used under preempt_disable()
Linus Torvalds [Wed, 25 Mar 2026 21:47:18 +0000 (14:47 -0700)]
Merge tag 'hardening-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- fix required Clang version for CC_HAS_COUNTED_BY_PTR (Nathan
Chancellor)
- update Coccinelle script used for kmalloc_obj
* tag 'hardening-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
init/Kconfig: Require a release version of clang-22 for CC_HAS_COUNTED_BY_PTR
coccinelle: kmalloc_obj: Remove default GFP_KERNEL arg
Linus Torvalds [Wed, 25 Mar 2026 21:43:06 +0000 (14:43 -0700)]
Merge tag 'platform-drivers-x86-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New HW Support. The trivial drop of unused gz_chain_head is
not exactly fixes material but it allows other work to avoid problems
so I decided to take it in along with the fixes.
- amd/hsmp: Fix typo in error message
- asus-armoury: Add support for G614FP, GA503QM, GZ302EAC, and GZ302EAC
- asus-nb-wmi: Add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
- hp-wmi: Support for Omen 16-k0xxx, 16-wf1xxx, 16-xf0xxx
- intel-hid: Disable wakeup_mode during hibernation
- ISST:
- Check HWP support before MSR access
- Correct locked bit width
- lenovo: wmi-gamezone: Drop unused gz_chain_head
- olpc-xo175-ec: Fix overflow error message"
* tag 'platform-drivers-x86-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Correct locked bit width
platform/x86: intel-hid: disable wakeup_mode during hibernation
platform/x86: asus-armoury: add support for GZ302EA and GZ302EAC
platform/x86: asus-nb-wmi: add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
platform/x86/amd/hsmp: Fix typo in error message
platform/olpc: olpc-xo175-ec: Fix overflow error message to print inlen
platform/x86: lenovo: wmi-gamezone: Drop gz_chain_head
platform/x86: ISST: Check HWP support before MSR access
platform/x86: hp-wmi: Add support for Omen 16-k0xxx (8A4D)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C76)
platform/x86: hp-wmi: Add Omen 16-xf0xxx (8BCA) support
platform/x86: asus-armoury: add support for G614FP
platform/x86: asus-armoury: add support for GA503QM
MAINTAINERS: change email address of Denis Benato
Boqun Feng [Thu, 19 Mar 2026 00:56:21 +0000 (17:56 -0700)]
rcu: Use an intermediate irq_work to start process_srcu()
Since commit c27cea4416a3 ("rcu: Re-implement RCU Tasks Trace in terms
of SRCU-fast") we switched to SRCU in BPF. However as BPF instrument can
happen basically everywhere (including where a scheduler lock is held),
call_srcu() now needs to avoid acquiring scheduler lock because
otherwise it could cause deadlock [1]. Fix this by following what the
previous RCU Tasks Trace did: using an irq_work to delay the queuing of
the work to start process_srcu().
[boqun: Apply Joel's feedback]
[boqun: Apply Andrea's test feedback]
Reported-by: Andrea Righi <arighi@nvidia.com> Closes: https://lore.kernel.org/all/abjzvz_tL_siV17s@gpd4/ Fixes: commit c27cea4416a3 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast") Link: https://lore.kernel.org/rcu/3c4c5a29-24ea-492d-aeee-e0d9605b4183@nvidia.com/ Suggested-by: Zqiang <qiang.zhang@linux.dev> Tested-by: Andrea Righi <arighi@nvidia.com> Tested-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Boqun Feng <boqun@kernel.org>
Paul E. McKenney [Sat, 21 Mar 2026 03:29:20 +0000 (20:29 -0700)]
srcu: Push srcu_node allocation to GP when non-preemptible
When the srcutree.convert_to_big and srcutree.big_cpu_lim kernel boot
parameters specify initialization-time allocation of the srcu_node
tree for statically allocated srcu_struct structures (for example, in
DEFINE_SRCU() at build time instead of init_srcu_struct() at runtime),
init_srcu_struct_nodes() will attempt to dynamically allocate this tree
at the first run-time update-side use of this srcu_struct structure,
but while holding a raw spinlock. Because the memory allocator can
acquire non-raw spinlocks, this can result in lockdep splats.
This commit therefore uses the same SRCU_SIZE_ALLOC trick that is used
when the first run-time update-side use of this srcu_struct structure
happens before srcu_init() is called. The actual allocation then takes
place from workqueue context at the ends of upcoming SRCU grace periods.
[boqun: Adjust the sha1 of the Fixes tag]
Fixes: 175b45ed343a ("srcu: Use raw spinlocks so call_srcu() can be used under preempt_disable()") Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Boqun Feng <boqun@kernel.org>
Paul E. McKenney [Sat, 14 Mar 2026 11:12:58 +0000 (04:12 -0700)]
srcu: Use raw spinlocks so call_srcu() can be used under preempt_disable()
Tree SRCU has used non-raw spinlocks for many years, motivated by a desire
to avoid unnecessary real-time latency and the absence of any reason to
use raw spinlocks. However, the recent use of SRCU in tracing as the
underlying implementation of RCU Tasks Trace means that call_srcu()
is invoked from preemption-disabled regions of code, which in turn
requires that any locks acquired by call_srcu() or its callees must be
raw spinlocks.
This commit therefore converts SRCU's spinlocks to raw spinlocks.
[boqun: Add Fixes tag]
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Fixes: c27cea4416a3 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast") Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Boqun Feng <boqun@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Gao Xiang [Tue, 24 Mar 2026 15:54:07 +0000 (23:54 +0800)]
erofs: fix .fadvise() for page cache sharing
Currently, .fadvise() doesn't work well if page cache sharing is on
since shared inodes belong to a pseudo fs generated with init_pseudo(),
and sb->s_bdi is the default one &noop_backing_dev_info.
Then, generic_fadvise() will just behave as a no-op if sb->s_bdi is
&noop_backing_dev_info, but as the bdev fs (the bdev fs changes
inode_to_bdi() instead), it's actually NOT a pure memfs.
Let's generate a real bdi for erofs_ishare_mnt instead.
Fixes: d86d7817c042 ("erofs: implement .fadvise for page cache share") Reviewed-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Linus Torvalds [Tue, 24 Mar 2026 19:41:29 +0000 (12:41 -0700)]
Merge tag 'cxl-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) fixes from Dave Jiang:
- Adjust the startup priority of cxl_pmem to be higher than that of
cxl_acpi
- Use proper endpoint validity check upon sanitize
- Avoid incorrect DVSEC fallback when HDM decoders are enabled
- Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatch
- Fix leakage in __construct_region()
- Fix use after free of parent_port in cxl_detach_ep()
* tag 'cxl-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Adjust the startup priority of cxl_pmem to be higher than that of cxl_acpi
cxl/mbox: Use proper endpoint validity check upon sanitize
cxl/hdm: Avoid incorrect DVSEC fallback when HDM decoders are enabled
cxl/acpi: Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatch
cxl/region: Fix leakage in __construct_region()
cxl/port: Fix use after free of parent_port in cxl_detach_ep()
Linus Torvalds [Tue, 24 Mar 2026 16:12:45 +0000 (09:12 -0700)]
Merge tag 'mm-hotfixes-stable-2026-03-23-17-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"6 hotfixes. 2 are cc:stable. All are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-23-17-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/stat: monitor all System RAM resources
mm/zswap: add missing kunmap_local()
mailmap: update email address for Muhammad Usama Anjum
zram: do not slot_free() written-back slots
mm/damon/core: avoid use of half-online-committed context
mm/rmap: clear vma->anon_vma on error
Linus Torvalds [Tue, 24 Mar 2026 15:58:38 +0000 (08:58 -0700)]
Merge tag 'perf-tools-fixes-for-v7.0-2-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix parsing 'overwrite' in command line event definitions in
big-endian machines by writing correct union member
- Fix finding default metric in 'perf stat'
- Fix relative paths for including headers in 'perf kvm stat'
- Sync header copies with the kernel sources: msr-index.h, kvm,
build_bug.h
* tag 'perf-tools-fixes-for-v7.0-2-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers: Synchronize linux/build_bug.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf kvm stat: Fix relative paths for including headers
perf parse-events: Fix big-endian 'overwrite' by writing correct union member
perf metricgroup: Fix metricgroup__has_metric_or_groups()
tools headers: Skip arm64 cputype.h check
Linus Torvalds [Tue, 24 Mar 2026 04:30:14 +0000 (21:30 -0700)]
Merge tag 'xsa482-7.0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Restrict the xen privcmd driver in unprivileged domU to only allow
hypercalls to target domain when using secure boot"
* tag 'xsa482-7.0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: add boot control for restricted usage in domU
xen/privcmd: restrict usage in unprivileged domU
SeongJae Park [Mon, 16 Mar 2026 23:51:17 +0000 (16:51 -0700)]
mm/damon/stat: monitor all System RAM resources
DAMON_STAT usage document (Documentation/admin-guide/mm/damon/stat.rst)
says it monitors the system's entire physical memory. But, it is
monitoring only the biggest System RAM resource of the system. When there
are multiple System RAM resources, this results in monitoring only an
unexpectedly small fraction of the physical memory. For example, suppose
the system has a 500 GiB System RAM, 10 MiB non-System RAM, and 500 GiB
System RAM resources in order on the physical address space. DAMON_STAT
will monitor only the first 500 GiB System RAM. This situation is
particularly common on NUMA systems.
Select a physical address range that covers all System RAM areas of the
system, to fix this issue and make it work as documented.
Commit e2c3b6b21c77 ("mm: zswap: use SG list decompression APIs from
zsmalloc") updated zswap_decompress() to use the scatterwalk API to copy
data for uncompressed pages.
In doing so, it mapped kernel memory locally for 32-bit kernels using
kmap_local_folio(), however it never unmapped this memory.
This resulted in the linked syzbot report where a BUG_ON() is triggered
due to leaking the kmap slot.
This patch fixes the issue by explicitly unmapping the established kmap.
Also, add flush_dcache_folio() after the kunmap_local() call
I had assumed that a new folio here combined with the flush that is done at
the point of setting the PTE would suffice, but it doesn't seem that's
actually the case, as update_mmu_cache() will in many archtectures only
actually flush entries where a dcache flush was done on a range previously.
I had also wondered whether kunmap_local() might suffice, but it doesn't
seem to be the case.
Some arches do seem to actually dcache flush on unmap, parisc does it if
CONFIG_HIGHMEM is not set by setting ARCH_HAS_FLUSH_ON_KUNMAP and calling
kunmap_flush_on_unmap() from __kunmap_local(), otherwise non-CONFIG_HIGHMEM
callers do nothing here.
Otherwise arch_kmap_local_pre_unmap() is called which does:
* sparc - flush_cache_all()
* arm - if VIVT, __cpuc_flush_dcache_area()
* otherwise - nothing
Also arch_kmap_local_post_unmap() is called which does:
But this is only if it's high memory, and doesn't cover all architectures,
so is presumably intended to handle other cache consistency concerns.
In any case, VIPT is problematic here whether low or high memory (in spite
of what the documentation claims, see [0] - 'the kernel did write to a page
that is in the page cache page and / or in high memory'), because dirty
cache lines may exist at the set indexed by the kernel direct mapping,
which won't exist in the set indexed by any subsequent userland mapping,
meaning userland might read stale data from L2 cache.
Even if the documentation is correct and low memory is fine not to be
flushed here, we can't be sure as to whether the memory is low or high
(kmap_local_folio() will be a no-op if low), and this call should be
harmless if it is low.
VIVT would require more work if the memory were shared and already mapped,
but this isn't the case here, and would anyway be handled by the dcache
flush call.
In any case, we definitely need this flush as far as I can tell.
And we should probably consider updating the documentation unless it turns
out there's somehow dcache synchronisation that happens for low
memory/64-bit kernels elsewhere?
[ljs@kernel.org: add flush_dcache_folio() after the kunmap_local() call] Link: https://lkml.kernel.org/r/13e09a99-181f-45ac-a18d-057faf94bccb@lucifer.local Link: https://lkml.kernel.org/r/20260316140122.339697-1-ljs@kernel.org Link: https://docs.kernel.org/core-api/cachetlb.html Fixes: e2c3b6b21c77 ("mm: zswap: use SG list decompression APIs from zsmalloc") Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org> Reported-by: syzbot+fe426bef95363177631d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/69b75e2c.050a0220.12d28.015a.GAE@google.com Acked-by: Yosry Ahmed <yosry@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: SeongJae Park <sj@kernel.org> Acked-by: Yosry Ahmed <yosry@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mailmap: update email address for Muhammad Usama Anjum
Add updated email address.
Link: https://lkml.kernel.org/r/20260310171757.3970390-1-usama.anjum@arm.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Carlos Bilbao <carlos.bilbao@kernel.org> Cc: Hans Verkuil <hverkuil@kernel.org> Cc: Jakub Kacinski <kuba@kernel.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Shannon Nelson <sln@onemain.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Schwartz [Thu, 12 Mar 2026 21:22:46 +0000 (14:22 -0700)]
platform/x86: asus-nb-wmi: add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
The ASUS ROG Flow Z13-KJP GZ302EAC model uses sys_vendor name ASUS
rather than ASUSTeK COMPUTER INC., but it needs the same folio quirk as
the other ROG Flow Z13. To keep things simple, just match on sys_vendor
ASUS since it covers both.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Denis Benato <denis.benato@linux.dev> Link: https://patch.msgid.link/20260312212246.1608080-1-matthew.schwartz@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Alok Tiwari [Tue, 10 Mar 2026 13:01:35 +0000 (06:01 -0700)]
platform/olpc: olpc-xo175-ec: Fix overflow error message to print inlen
The command length check validates inlen (> 5), but the error message
incorrectly printed resp_len. Print inlen so the log reflects the
actual command length.
Fixes: 0c3d931b3ab9e ("Platform: OLPC: Add XO-1.75 EC driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20260310130138.700687-1-alok.a.tiwari@oracle.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: lenovo: wmi-gamezone: Drop gz_chain_head
The gz_chain_head variable has been unused since the driver's initial
addition to the tree. Its use was eliminated between v3 and v4 during
development but due to the reference of gz_chain_head's wait_list
member, the compiler could not warn that it was unused.
After a (tip) commit ("locking/rwsem: Remove the list_head from struct
rw_semaphore"), which removed a reference to the variable passed to
__RWSEM_INITIALIZER(), certain configurations show an unused variable
warning from the Lenovo wmi-gamezone driver:
drivers/platform/x86/lenovo/wmi-gamezone.c:34:31: warning: 'gz_chain_head' defined but not used [-Wunused-variable]
34 | static BLOCKING_NOTIFIER_HEAD(gz_chain_head);
| ^~~~~~~~~~~~~
include/linux/notifier.h:119:39: note: in definition of macro 'BLOCKING_NOTIFIER_HEAD'
119 | struct blocking_notifier_head name = \
| ^~~~
Remove the variable to prevent the warning from showing up.
Fixes: 22024ac5366f ("platform/x86: Add Lenovo Gamezone WMI Driver") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://patch.msgid.link/20260313-lenovo-wmi-gamezone-remove-gz_chain_head-v1-1-ce5231f0c6fa@kernel.org
[ij: reorganized the changelog] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Li RongQing [Tue, 3 Mar 2026 07:46:35 +0000 (02:46 -0500)]
platform/x86: ISST: Check HWP support before MSR access
On some systems, HWP can be explicitly disabled in the BIOS settings
When HWP is disabled by firmware, the HWP CPUID bit is not set, and
attempting to read MSR_PM_ENABLE will result in a General Protection
(GP) fault.
Krishna Chomal [Mon, 2 Mar 2026 07:35:25 +0000 (13:05 +0530)]
platform/x86: hp-wmi: Add support for Omen 16-k0xxx (8A4D)
The HP Omen 16-k0xxx (board ID: 8A4D) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Create a new quirk omen_v1_legacy_thermal_params which allows a board to
use Omen V1 thermal values, but rely on the older legacy
HP_OMEN_EC_THERMAL_PROFILE_OFFSET. Add the DMI board name to
victus_s_thermal_profile_boards[] table and map it to the newly added
quirk.
Testing on board 8A4D confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Krishna Chomal [Fri, 27 Feb 2026 15:41:06 +0000 (21:11 +0530)]
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C76)
The HP Omen 16-wf1xxx (board ID: 8C76) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to board 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8C76 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Raed [Wed, 11 Mar 2026 13:13:38 +0000 (18:43 +0530)]
platform/x86: hp-wmi: Add Omen 16-xf0xxx (8BCA) support
The HP Omen 16-xf0xxx board 8BCA uses the same Victus-S fan and
thermal WMI path as other recently supported Omen/Victus boards,
but it requires Omen v1 thermal profile parameters for correct
platform profile behavior.
Add board 8BCA to victus_s_thermal_profile_boards[] and map it
to omen_v1_thermal_params.
Validated on HP Omen 16-xf0xxx (board 8BCA):
- /sys/firmware/acpi/platform_profile exposes
low-power/balanced/performance
- fan RPM reporting works (fan1_input/fan2_input)
- manual fan control works through hp-wmi hwmon (pwm1/pwm1_enable)
tools headers: Synchronize linux/build_bug.h with the kernel sources
To pick up the changes in:
6ffd853b0b10e1e2 ("build_bug.h: correct function parameters names in kernel-doc")
That just add some comments, addressing this perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/build_bug.h include/linux/build_bug.h
Please take a look at tools/include/uapi/README for further info on this
synchronization process.
Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ian Rogers <irogers@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mikko Perttunen [Tue, 3 Mar 2026 04:32:11 +0000 (13:32 +0900)]
i2c: tegra: Don't mark devices with pins as IRQ safe
I2C devices with associated pinctrl states (DPAUX I2C controllers)
will change pinctrl state during runtime PM. This requires taking
a mutex, so these devices cannot be marked as IRQ safe.
Linus Torvalds [Sun, 22 Mar 2026 18:16:06 +0000 (11:16 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix how linked registers track zero extension of subregisters (Daniel
Borkmann)
- Fix unsound scalar fork for OR instructions (Daniel Wade)
- Fix exception exit lock check for subprogs (Ihor Solodrai)
- Fix undefined behavior in interpreter for SDIV/SMOD instructions
(Jenny Guanni Qu)
- Release module's BTF when module is unloaded (Kumar Kartikeya
Dwivedi)
- Fix constant blinding for PROBE_MEM32 instructions (Sachin Kumar)
- Reset register ID for END instructions to prevent incorrect value
tracking (Yazhou Tang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a test cases for sync_linked_regs regarding zext propagation
bpf: Fix sync_linked_regs regarding BPF_ADD_CONST32 zext propagation
selftests/bpf: Add tests for maybe_fork_scalars() OR vs AND handling
bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR
selftests/bpf: Add tests for sdiv32/smod32 with INT_MIN dividend
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
selftests/bpf: Add tests for bpf_throw lock leak from subprogs
bpf: Fix exception exit lock checking for subprogs
bpf: Release module BTF IDR before module unload
selftests/bpf: Fix pkg-config call on static builds
bpf: Fix constant blinding for PROBE_MEM32 stores
selftests/bpf: Add test for BPF_END register ID reset
bpf: Reset register ID for BPF_END value tracking
Linus Torvalds [Sun, 22 Mar 2026 18:10:31 +0000 (11:10 -0700)]
Merge tag 'trace-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Revert "tracing: Remove pid in task_rename tracing output"
A change was made to remove the pid field from the task_rename event
because it was thought that it was always done for the current task
and recording the pid would be redundant. This turned out to be
incorrect and there are a few corner case where this is not true and
caused some regressions in tooling.
- Fix the reading from user space for migration
The reading of user space uses a seq lock type of logic where it uses
a per-cpu temporary buffer and disables migration, then enables
preemption, does the copy from user space, disables preemption,
enables migration and checks if there was any schedule switches while
preemption was enabled. If there was a context switch, then it is
considered that the per-cpu buffer could be corrupted and it tries
again. There's a protection check that tests if it takes a hundred
tries, it issues a warning and exits out to prevent a live lock.
This was triggered because the task was selected by the load balancer
to be migrated to another CPU, every time preemption is enabled the
migration task would schedule in try to migrate the task but can't
because migration is disabled and let it run again. This caused the
scheduler to schedule out the task every time it enabled preemption
and made the loop never exit (until the 100 iteration test
triggered).
Fix this by enabling and disabling preemption and keeping migration
enabled if the reading from user space needs to be done again. This
will let the migration thread migrate the task and the copy from user
space will likely pass on the next iteration.
- Fix trace_marker copy option freeing
The "copy_trace_marker" option allows a tracing instance to get a
copy of a write to the trace_marker file of the top level instance.
This is managed by a link list protected by RCU. When an instance is
removed, a check is made if the option is set, and if so
synchronized_rcu() is called.
The problem is that an iteration is made to reset all the flags to
what they were when the instance was created (to perform clean ups)
was done before the check of the copy_trace_marker option and that
option was cleared, so the synchronize_rcu() was never called.
Move the clearing of all the flags after the check of
copy_trace_marker to do synchronize_rcu() so that the option is still
set if it was before and the synchronization is performed.
- Fix entries setting when validating the persistent ring buffer
When validating the persistent ring buffer on boot up, the number of
events per sub-buffer is added to the sub-buffer meta page. The
validator was updating cpu_buffer->head_page (the first sub-buffer of
the per-cpu buffer) and not the "head_page" variable that was
iterating the sub-buffers. This was causing the first sub-buffer to
be assigned the entries for each sub-buffer and not the sub-buffer
that was supposed to be updated.
- Use "hash" value to update the direct callers
When updating the ftrace direct callers, it assigned a temporary
callback to all the callback functions of the ftrace ops and not just
the functions represented by the passed in hash. This causes an
unnecessary slow down of the functions of the ftrace_ops that is not
being modified. Only update the functions that are going to be
modified to call the ftrace loop function so that the update can be
made on those functions.
* tag 'trace-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Use hash argument for tmp_ops in update_ftrace_direct_mod
ring-buffer: Fix to update per-subbuf entries of persistent ring buffer
tracing: Fix trace_marker copy link list updates
tracing: Fix failure to read user space from system call trace events
tracing: Revert "tracing: Remove pid in task_rename tracing output"
Linus Torvalds [Sun, 22 Mar 2026 18:05:34 +0000 (11:05 -0700)]
Merge tag 'i2c-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix broken I2C communication on Armada 3700 with recovery
- fix device_node reference leak in probe (fsi)
- fix NULL-deref when serial string is missing (cp2615)
* tag 'i2c-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pxa: defer reset on Armada 3700 when recovery is used
i2c: fsi: Fix a potential leak in fsi_i2c_probe()
i2c: cp2615: fix serial string NULL-deref at probe
Linus Torvalds [Sun, 22 Mar 2026 17:54:12 +0000 (10:54 -0700)]
Merge tag 'x86-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Improve Qemu MCE-injection behavior by only using AMD SMCA MSRs if
the feature bit is set
- Fix the relative path of gettimeofday.c inclusion in vclock_gettime.c
- Fix a boot crash on UV clusters when a socket is marked as
'deconfigured' which are mapped to the SOCK_EMPTY node ID by
the UV firmware, while Linux APIs expect NUMA_NO_NODE.
The difference being (0xffff [unsigned short ~0]) vs [int -1]
* tag 'x86-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Handle deconfigured sockets
x86/entry/vdso: Fix path of included gettimeofday.c
x86/mce/amd: Check SMCA feature bit before accessing SMCA MSRs
Linus Torvalds [Sun, 22 Mar 2026 17:31:51 +0000 (10:31 -0700)]
Merge tag 'perf-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
- Fix a PMU driver crash on AMD EPYC systems, caused by
a race condition in x86_pmu_enable()
- Fix a possible counter-initialization bug in x86_pmu_enable()
- Fix a counter inheritance bug in inherit_event() and
__perf_event_read()
- Fix an Intel PMU driver branch constraints handling bug
found by UBSAN
- Fix the Intel PMU driver's new Off-Module Response (OMR)
support code for Diamond Rapids / Nova lake, to fix a snoop
information parsing bug
* tag 'perf-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix OMR snoop information parsing issues
perf/x86/intel: Add missing branch counters constraint apply
perf: Make sure to use pmu_ctx->pmu for groups
x86/perf: Make sure to program the counter value for stopped events on migration
perf/x86: Move event pointer setup earlier in x86_pmu_enable()
Linus Torvalds [Sun, 22 Mar 2026 17:17:50 +0000 (10:17 -0700)]
Merge tag 'objtool-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix three more livepatching related build environment bugs, and a
false positive warning with Clang jump tables"
* tag 'objtool-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix Clang jump table detection
livepatch/klp-build: Fix inconsistent kernel version
objtool/klp: fix mkstemp() failure with long paths
objtool/klp: fix data alignment in __clone_symbol()
Linus Torvalds [Sun, 22 Mar 2026 16:57:20 +0000 (09:57 -0700)]
Merge tag 'locking-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a sparse build error regression in <linux/local_lock_internal.h>
caused by the locking context-analysis changes"
* tag 'locking-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
include/linux/local_lock_internal.h: Make this header file again compatible with sparse
Linus Torvalds [Sun, 22 Mar 2026 16:55:58 +0000 (09:55 -0700)]
Merge tag 'irq-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a mailbox channel leak in the riscv-rpmi-sysmsi irqchip driver"
* tag 'irq-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-rpmi-sysmsi: Fix mailbox channel leak in rpmi_sysmsi_probe()
slot_free() basically completely resets the slots by clearing all of
its flags and attributes. While zram_writeback_complete() restores
some of flags back (those that are necessary for async read
decompression) we still lose a lot of slot's metadata. For example,
slot's ac-time, or ZRAM_INCOMPRESSIBLE.
More importantly, restoring flags/attrs requires extra attention as
some of the flags are directly affecting zram device stats. And the
original code did not pay that attention. Namely ZRAM_HUGE slots
handling in zram_writeback_complete(). The call to slot_free() would
decrement ->huge_pages, however when zram_writeback_complete() restored
the slot's ZRAM_HUGE flag, it would not get reflected in an incremented
->huge_pages. So when the slot would finally get freed, slot_free()
would decrement ->huge_pages again, leading to underflow.
Fix this by open-coding the required memory free and stats updates in
zram_writeback_complete(), rather than calling the destructive
slot_free(). Since we now preserve the ZRAM_HUGE flag on written-back
slots (for the deferred decompression path), we also update slot_free()
to skip decrementing ->huge_pages if ZRAM_WB is set.
SeongJae Park [Thu, 19 Mar 2026 14:52:17 +0000 (07:52 -0700)]
mm/damon/core: avoid use of half-online-committed context
One major usage of damon_call() is online DAMON parameters update. It is
done by calling damon_commit_ctx() inside the damon_call() callback
function. damon_commit_ctx() can fail for two reasons: 1) invalid
parameters and 2) internal memory allocation failures. In case of
failures, the damon_ctx that attempted to be updated (commit destination)
can be partially updated (or, corrupted from a perspective), and therefore
shouldn't be used anymore. The function only ensures the damon_ctx object
can safely deallocated using damon_destroy_ctx().
The API callers are, however, calling damon_commit_ctx() only after
asserting the parameters are valid, to avoid damon_commit_ctx() fails due
to invalid input parameters. But it can still theoretically fail if the
internal memory allocation fails. In the case, DAMON may run with the
partially updated damon_ctx. This can result in unexpected behaviors
including even NULL pointer dereference in case of damos_commit_dests()
failure [1]. Such allocation failure is arguably too small to fail, so
the real world impact would be rare. But, given the bad consequence, this
needs to be fixed.
Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving
the damon_commit_ctx() failure on the damon_ctx object. For this,
introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it
when it is failed. kdamond_call() checks if the field is set after each
damon_call_control->fn() is executed. If it is set, ignore remaining
callback requests and return. All kdamond_call() callers including
kdamond_fn() also check the maybe_corrupted field right after
kdamond_call() invocations. If the field is set, break the kdamond_fn()
main loop so that DAMON sill doesn't use the context that might be
corrupted.
Commit 542eda1a8329 ("mm/rmap: improve anon_vma_clone(),
unlink_anon_vmas() comments, add asserts") alters the way errors are
handled, but overlooked one important aspect of clean up.
When a VMA encounters an error state in anon_vma_clone() (that is, on
attempted allocation of anon_vma_chain objects), it cleans up partially
established state in cleanup_partial_anon_vmas(), before returning an
error.
However, this occurs prior to anon_vma->num_active_vmas being incremented,
and it also fails to clear the VMA's vma->anon_vma field, which remains in
place.
This is immediately an inconsistent state, because
anon_vma->num_active_vmas is supposed to track the number of VMAs whose
vma->anon_vma field references that anon_vma, and now that count is
off-by-negative-1 for each VMA for which this error state has occurred.
When VMAs are unlinked from this anon_vma, unlink_anon_vmas() will
eventually underflow anon_vma->num_active_vmas, which will trigger a
warning.
This will always eventually happen, as we unlink anon_vma's at process
teardown.
It could also cause maybe_reuse_anon_vma() to incorrectly permit the reuse
of an anon_vma which has active VMAs attached, which will lead to a
persistently invalid state.
The solution is to clear the VMA's anon_vma field when we clean up partial
state, as the fact we are doing so indicates clearly that the VMA is not
correctly integrated into the anon_vma tree and thus this field is
invalid.
Linus Torvalds [Sat, 21 Mar 2026 23:59:09 +0000 (16:59 -0700)]
Merge tag 'driver-core-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Generalize driver_override in the driver core, providing a common
sysfs implementation and concurrency-safe accessors for bus
implementations
- Do not use driver_override as IRQ name in the hwmon axi-fan driver
- Remove an unnecessary driver_override check in sh platform_early
- Migrate the platform bus to use the generic driver_override
infrastructure, fixing a UAF condition caused by accessing the
driver_override field without proper locking in the platform_match()
callback
* tag 'driver-core-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: platform: use generic driver_override infrastructure
sh: platform_early: remove pdev->driver_override check
hwmon: axi-fan: don't use driver_override as IRQ name
docs: driver-model: document driver_override
driver core: generalize driver_override in struct device
Jiri Olsa [Thu, 12 Mar 2026 12:37:38 +0000 (13:37 +0100)]
ftrace: Use hash argument for tmp_ops in update_ftrace_direct_mod
The modify logic registers temporary ftrace_ops object (tmp_ops) to trigger
the slow path for all direct callers to be able to safely modify attached
addresses.
At the moment we use ops->func_hash for tmp_ops filter, which represents all
the systems attachments. It's faster to use just the passed hash filter, which
contains only the modified sites and is always a subset of the ops->func_hash.
Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Menglong Dong <menglong8.dong@gmail.com> Cc: Song Liu <song@kernel.org> Link: https://patch.msgid.link/20260312123738.129926-1-jolsa@kernel.org Fixes: e93672f770d7 ("ftrace: Add update_ftrace_direct_mod function") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ring-buffer: Fix to update per-subbuf entries of persistent ring buffer
Since the validation loop in rb_meta_validate_events() updates the same
cpu_buffer->head_page->entries, the other subbuf entries are not updated.
Fix to use head_page to update the entries field, since it is the cursor
in this loop.
Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Ian Rogers <irogers@google.com> Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events") Link: https://patch.msgid.link/177391153882.193994.17158784065013676533.stgit@mhiramat.tok.corp.google.com Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Wed, 18 Mar 2026 22:55:12 +0000 (18:55 -0400)]
tracing: Fix trace_marker copy link list updates
When the "copy_trace_marker" option is enabled for an instance, anything
written into /sys/kernel/tracing/trace_marker is also copied into that
instances buffer. When the option is set, that instance's trace_array
descriptor is added to the marker_copies link list. This list is protected
by RCU, as all iterations uses an RCU protected list traversal.
When the instance is deleted, all the flags that were enabled are cleared.
This also clears the copy_trace_marker flag and removes the trace_array
descriptor from the list.
The issue is after the flags are called, a direct call to
update_marker_trace() is performed to clear the flag. This function
returns true if the state of the flag changed and false otherwise. If it
returns true here, synchronize_rcu() is called to make sure all readers
see that its removed from the list.
But since the flag was already cleared, the state does not change and the
synchronization is never called, leaving a possible UAF bug.
Move the clearing of all flags below the updating of the copy_trace_marker
option which then makes sure the synchronization is performed.
Also use the flag for checking the state in update_marker_trace() instead
of looking at if the list is empty.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260318185512.1b6c7db4@gandalf.local.home Fixes: 7b382efd5e8a ("tracing: Allow the top level trace_marker to write into another instances") Reported-by: Sasha Levin <sashal@kernel.org> Closes: https://lore.kernel.org/all/20260225133122.237275-1-sashal@kernel.org/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Mon, 16 Mar 2026 17:07:34 +0000 (13:07 -0400)]
tracing: Fix failure to read user space from system call trace events
The system call trace events call trace_user_fault_read() to read the user
space part of some system calls. This is done by grabbing a per-cpu
buffer, disabling migration, enabling preemption, calling
copy_from_user(), disabling preemption, enabling migration and checking if
the task was preempted while preemption was enabled. If it was, the buffer
is considered corrupted and it tries again.
There's a safety mechanism that will fail out of this loop if it fails 100
times (with a warning). That warning message was triggered in some
pi_futex stress tests. Enabling the sched_switch trace event and
traceoff_on_warning, showed the problem:
What happened was the task 1375 was flagged to be migrated. When
preemption was enabled, the migration thread woke up to migrate that task,
but failed because migration for that task was disabled. This caused the
loop to fail to exit because the task scheduled out while trying to read
user space.
Every time the task enabled preemption the migration thread would schedule
in, try to migrate the task, fail and let the task continue. But because
the loop would only enable preemption with migration disabled, it would
always fail because each time it enabled preemption to read user space,
the migration thread would try to migrate it.
To solve this, when the loop fails to read user space without being
scheduled out, enabled and disable preemption with migration enabled. This
will allow the migration task to successfully migrate the task and the
next loop should succeed to read user space without being scheduled out.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260316130734.1858a998@gandalf.local.home Fixes: 64cf7d058a005 ("tracing: Have trace_marker use per-cpu data to read user space") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The commit says that the tracepoint only deals with the current task,
however the following case is not current task:
comm_write() {
p = get_proc_task(inode);
if (!p)
return -ESRCH;
if (same_thread_group(current, p))
set_task_comm(p, buffer);
}
where set_task_comm() calls __set_task_comm() which records
the update of p and not current.
So revert the patch to show pid.
Cc: <mhiramat@kernel.org> Cc: <mathieu.desnoyers@efficios.com> Cc: <elver@google.com> Cc: <kees@kernel.org> Link: https://patch.msgid.link/20260306075954.4533-1-xuewen.yan@unisoc.com Fixes: e3f6a42272e0 ("tracing: Remove pid in task_rename tracing output") Reported-by: Guohua Yan <guohua.yan@unisoc.com> Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Daniel Borkmann [Thu, 19 Mar 2026 21:15:07 +0000 (22:15 +0100)]
selftests/bpf: Add a test cases for sync_linked_regs regarding zext propagation
Add multiple test cases for linked register tracking with alu32 ops:
- Add a test that checks sync_linked_regs() regarding reg->id (the linked
target register) for BPF_ADD_CONST32 rather than known_reg->id (the
branch register).
- Add a test case for linked register tracking that exposes the cross-type
sync_linked_regs() bug. One register uses alu32 (w7 += 1, BPF_ADD_CONST32)
and another uses alu64 (r8 += 2, BPF_ADD_CONST64), both linked to the
same base register.
- Add a test case that exercises regsafe() path pruning when two execution
paths reach the same program point with linked registers carrying
different ADD_CONST flags (BPF_ADD_CONST32 from alu32 vs BPF_ADD_CONST64
from alu64). This particular test passes with and without the fix since
the pruning will fail due to different ranges, but it would still be
useful to carry this one as a regression test for the unreachable div
by zero.
Jenny reported that in sync_linked_regs() the BPF_ADD_CONST32 flag is
checked on known_reg (the register narrowed by a conditional branch)
instead of reg (the linked target register created by an alu32 operation).
Example case with reg:
1. r6 = bpf_get_prandom_u32()
2. r7 = r6 (linked, same id)
3. w7 += 5 (alu32 -- r7 gets BPF_ADD_CONST32, zero-extended by CPU)
4. if w6 < 0xFFFFFFFC goto safe (narrows r6 to [0xFFFFFFFC, 0xFFFFFFFF])
5. sync_linked_regs() propagates to r7 but does NOT call zext_32_to_64()
6. Verifier thinks r7 is [0x100000001, 0x100000004] instead of [1, 4]
Since known_reg above does not have BPF_ADD_CONST32 set above, zext_32_to_64()
is never called on alu32-derived linked registers. This causes the verifier
to track incorrect 64-bit bounds, while the CPU correctly zero-extends the
32-bit result.
The code checking known_reg->id was correct however (see scalars_alu32_wrap
selftest case), but the real fix needs to handle both directions - zext
propagation should be done when either register has BPF_ADD_CONST32, since
the linked relationship involves a 32-bit operation regardless of which
side has the flag.
Example case with known_reg (exercised also by scalars_alu32_wrap):
Hence, fix it by checking for (reg->id | known_reg->id) & BPF_ADD_CONST32.
Moreover, sync_linked_regs() also has a soundness issue when two linked
registers used different ALU widths: one with BPF_ADD_CONST32 and the
other with BPF_ADD_CONST64. The delta relationship between linked registers
assumes the same arithmetic width though. When one register went through
alu32 (CPU zero-extends the 32-bit result) and the other went through
alu64 (no zero-extension), the propagation produces incorrect bounds.
Example:
r6 = bpf_get_prandom_u32() // fully unknown
if r6 >= 0x100000000 goto out // constrain r6 to [0, U32_MAX]
r7 = r6
w7 += 1 // alu32: r7.id = N | BPF_ADD_CONST32
r8 = r6
r8 += 2 // alu64: r8.id = N | BPF_ADD_CONST64
if r7 < 0xFFFFFFFF goto out // narrows r7 to [0xFFFFFFFF, 0xFFFFFFFF]
At the branch on r7, sync_linked_regs() runs with known_reg=r7
(BPF_ADD_CONST32) and reg=r8 (BPF_ADD_CONST64). The delta path
computes:
Then, because known_reg->id has BPF_ADD_CONST32, zext_32_to_64(r8) is
called, truncating r8 to [0, 0]. But r8 used a 64-bit ALU op -- the
CPU does NOT zero-extend it. The actual CPU value of r8 is
0xFFFFFFFE + 2 = 0x100000000, not 0. The verifier now underestimates
r8's 64-bit bounds, which is a soundness violation.
Fix sync_linked_regs() by skipping propagation when the two registers
have mixed ALU widths (one BPF_ADD_CONST32, the other BPF_ADD_CONST64).
Lastly, fix regsafe() used for path pruning: the existing checks used
"& BPF_ADD_CONST" to test for offset linkage, which treated
BPF_ADD_CONST32 and BPF_ADD_CONST64 as equivalent.
Fixes: 7a433e519364 ("bpf: Support negative offsets, BPF_SUB, and alu32 for linked register tracking") Reported-by: Jenny Guanni Qu <qguanni@gmail.com> Co-developed-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20260319211507.213816-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
====================
bpf: Fix unsound scalar forking for BPF_OR
maybe_fork_scalars() unconditionally sets the pushed path dst register
to 0 for both BPF_AND and BPF_OR. For AND this is correct (0 & K == 0),
but for OR it is wrong (0 | K == K, not 0). This causes the verifier to
track an incorrect value on the pushed path, leading to a verifier/runtime
divergence that allows out-of-bounds map value access.
v4: Use block comment style for multi-line comments in selftests (Amery Hung)
Add Reviewed-by/Acked-by tags
v3: Use single-line comment style in selftests (Alexei Starovoitov)
v2: Use push_stack(env, env->insn_idx, ...) to re-execute the insn
on the pushed path (Eduard Zingerman)
====================
Daniel Wade [Sat, 14 Mar 2026 02:15:21 +0000 (13:15 +1100)]
selftests/bpf: Add tests for maybe_fork_scalars() OR vs AND handling
Add three test cases to verifier_bounds.c to verify that
maybe_fork_scalars() correctly tracks register values for BPF_OR
operations with constant source operands:
1. or_scalar_fork_rejects_oob: After ARSH 63 + OR 8, the pushed
path should have dst = 8. With value_size = 8, accessing
map_value + 8 is out of bounds and must be rejected.
2. and_scalar_fork_still_works: Regression test ensuring AND
forking continues to work. ARSH 63 + AND 4 produces pushed
dst = 0 and current dst = 4, both within value_size = 8.
3. or_scalar_fork_allows_inbounds: After ARSH 63 + OR 4, the
pushed path has dst = 4, which is within value_size = 8
and should be accepted.
These tests exercise the fix in the previous patch, which makes the
pushed path re-execute the ALU instruction so it computes the correct
result for BPF_OR.
Daniel Wade [Sat, 14 Mar 2026 02:15:20 +0000 (13:15 +1100)]
bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR
maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the
source operand is a constant. When dst has signed range [-1, 0], it
forks the verifier state: the pushed path gets dst = 0, the current
path gets dst = -1.
For BPF_AND this is correct: 0 & K == 0.
For BPF_OR this is wrong: 0 | K == K, not 0.
The pushed path therefore tracks dst as 0 when the runtime value is K,
producing an exploitable verifier/runtime divergence that allows
out-of-bounds map access.
Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to
push_stack(), so the pushed path re-executes the ALU instruction with
dst = 0 and naturally computes the correct result for any opcode.
Fixes: bffacdb80b93 ("bpf: Recognize special arithmetic shift in the verifier") Signed-off-by: Daniel Wade <danjwade95@gmail.com> Reviewed-by: Amery Hung <ameryhung@gmail.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20260314021521.128361-2-danjwade95@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
====================
bpf: Fix abs(INT_MIN) undefined behavior in interpreter sdiv/smod
The BPF interpreter's signed 32-bit division and modulo handlers use
abs() on s32 operands, which is undefined for S32_MIN. This causes
the interpreter to compute wrong results, creating a mismatch with
the verifier's range tracking.
For example, INT_MIN / 2 returns 0x40000000 instead of the correct
0xC0000000. The verifier tracks the correct range, so a crafted BPF
program can exploit the mismatch for out-of-bounds map value access
(confirmed by KASAN).
Patch 1 introduces abs_s32() which handles S32_MIN correctly and
replaces all 8 abs((s32)...) call sites. s32 is the only affected
case -- the s64 handlers do not use abs().
Patch 2 adds selftests covering sdiv32 and smod32 with INT_MIN
dividend to prevent regression.
Changes since v4:
- Renamed __safe_abs32() to abs_s32() and dropped inline keyword
per Alexei Starovoitov's feedback
Changes since v3:
- Fixed stray blank line deletion in the file header
- Improved comment per Yonghong Song's suggestion
- Added JIT vs interpreter context to selftest commit message
Changes since v2:
- Simplified to use -(u32)x per Mykyta Yatsenko's suggestion
Changes since v1:
- Moved helper above kerneldoc comment block to fix build warnings
====================
selftests/bpf: Add tests for sdiv32/smod32 with INT_MIN dividend
Add tests to verify that signed 32-bit division and modulo operations
produce correct results when the dividend is INT_MIN (0x80000000).
The bug fixed in the previous commit only affects the BPF interpreter
path. When JIT is enabled (the default on most architectures), the
native CPU division instruction produces the correct result and these
tests pass regardless. With bpf_jit_enable=0, the interpreter is used
and without the previous fix, INT_MIN / 2 incorrectly returns
0x40000000 instead of 0xC0000000 due to abs(S32_MIN) undefined
behavior, causing these tests to fail.
Test cases:
- SDIV32 INT_MIN / 2 = -1073741824 (imm and reg divisor)
- SMOD32 INT_MIN % 2 = 0 (positive and negative divisor)
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs().
Fixes: ec0e2da95f72 ("bpf: Support new signed div/mod instructions.") Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Mykyta Yatsenko <yatsenko@meta.com> Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com> Link: https://lore.kernel.org/r/20260311011116.2108005-2-qguanni@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ihor Solodrai [Fri, 20 Mar 2026 00:08:09 +0000 (17:08 -0700)]
selftests/bpf: Add tests for bpf_throw lock leak from subprogs
Add test cases to ensure the verifier correctly rejects bpf_throw from
subprogs when RCU, preempt, or IRQ locks are held:
* reject_subprog_rcu_lock_throw: subprog acquires bpf_rcu_read_lock and
then calls bpf_throw
* reject_subprog_throw_preempt_lock: always-throwing subprog called while
caller holds bpf_preempt_disable
* reject_subprog_throw_irq_lock: always-throwing subprog called while
caller holds bpf_local_irq_save
Ihor Solodrai [Fri, 20 Mar 2026 00:08:08 +0000 (17:08 -0700)]
bpf: Fix exception exit lock checking for subprogs
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
Wolfram Sang [Sat, 21 Mar 2026 18:52:12 +0000 (19:52 +0100)]
Merge tag 'i2c-host-fixes-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-fixes for v7.0-rc5
pxa: fix broken I2C communication on Armada 3700 with recovery
fsi: fix device_node reference leak in probe
cp2615: fix NULL-deref when serial string is missing
* tag 'hwmon-for-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max6639) Fix pulses-per-revolution implementation
hwmon: (pmbus/isl68137) Fix unchecked return value and use sysfs_emit()
hwmon: (pmbus/ina233) Add error check for pmbus_read_word_data() return value
hwmon: (pmbus/mp2869) Check pmbus_read_byte_data() before using its return value
hwmon: (pmbus/mp2975) Add error check for pmbus_read_word_data() return value
hwmon: (pmbus/hac300s) Add error check for pmbus_read_word_data() return value
Linus Torvalds [Sat, 21 Mar 2026 15:46:13 +0000 (08:46 -0700)]
Merge tag 'bootconfig-fixes-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- Check error code of xbc_init_node() in override value path in
xbc_parse_kv()
- Fix fd leak in load_xbc_file() on fstat failure
* tag 'bootconfig-fixes-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/bootconfig: fix fd leak in load_xbc_file() on fstat failure
lib/bootconfig: check xbc_init_node() return in override path
Linus Torvalds [Sat, 21 Mar 2026 15:42:17 +0000 (08:42 -0700)]
Merge tag 'for-7.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Another batch of fixes for problems that have been identified by tools
analyzing code or by fuzzing. Most of them are short, two patches fix
the same thing in many places so the diffs are bigger.
- handle potential NULL pointer errors after attempting to read
extent and checksum trees
- prevent ENOSPC when creating many qgroups by ioctls in the same
transaction
- encoded write ioctl fixes (with 64K page and 4K block size):
- fix unexpected bio length
- do not let compressed bios and pages interfere with page cache
- compression fixes on setups with 64K page and 4K block size: fix
folio length assertions (zstd and lzo)
- remap tree fixes:
- make sure to hold block group reference while moving it
- handle early exit when moving block group to unused list
- handle deleted subvolumes with inconsistent state of deletion
progress"
* tag 'for-7.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: reject root items with drop_progress and zero drop_level
btrfs: check block group before marking it unused in balance_remap_chunks()
btrfs: hold block group reference during entire move_existing_remap()
btrfs: fix an incorrect ASSERT() condition inside lzo_decompress_bio()
btrfs: fix an incorrect ASSERT() condition inside zstd_decompress_bio()
btrfs: do not touch page cache for encoded writes
btrfs: fix a bug that makes encoded write bio larger than expected
btrfs: reserve enough transaction items for qgroup ioctls
btrfs: check for NULL root after calls to btrfs_csum_root()
btrfs: check for NULL root after calls to btrfs_extent_root()
Linus Torvalds [Sat, 21 Mar 2026 01:21:27 +0000 (18:21 -0700)]
Merge tag 'drm-fixes-2026-03-21' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular weekly pull request, from sunny San Diego. Usual suspects in
xe/i915/amdgpu with small fixes all over, then some minor fixes across
a few other drivers. It's probably a bit on the heavy side, but most
of the fix seem well contained,
core:
- drm_dev_unplug UAF fix
pagemap:
- lock handling fix
xe:
- A number of teardown fixes
- Skip over non-leaf PTE for PRL generation
- Fix an uninitialized variable
- Fix a missing runtime PM reference
i915/display:
- Fix #15771: Screen corruption and stuttering on P14s w/ 3K display
- Fix for PSR entry setup frames count on rejected commit
- Fix OOPS if firmware is not loaded and suspend is attempted
- Fix unlikely NULL deref due to DC6 on probe
* tag 'drm-fixes-2026-03-21' of https://gitlab.freedesktop.org/drm/kernel: (40 commits)
drm/xe: Fix missing runtime PM reference in ccs_mode_store
drm/xe: Open-code GGTT MMIO access protection
drm/xe/lrc: Fix uninitialized new_ts when capturing context timestamp
drm/xe/oa: Allow reading after disabling OA stream
drm/xe: Skip over non leaf pte for PRL generation
drm/xe/guc: Ensure CT state transitions via STOP before DISABLED
drm/xe: Trigger queue cleanup if not in wedged mode 2
drm/xe: Forcefully tear down exec queues in GuC submit fini
drm/xe: Always kill exec queues in xe_guc_submit_pause_abort
drm/xe/guc: Fail immediately on GuC load error
drm/i915/gt: Check set_default_submission() before deferencing
drm/radeon: apply state adjust rules to some additional HAINAN vairants
drm/amdgpu: apply state adjust rules to some additional HAINAN vairants
drm/amdgpu: rework how we handle TLB fences
drm/bridge: dw-hdmi-qp: fix multi-channel audio output
drm: Fix use-after-free on framebuffers and property blobs when calling drm_dev_unplug
drm/amdgpu: Fix ISP segfault issue in kernel v7.0
drm/amdgpu/gmc9.0: add bounds checking for cid
drm/amdgpu/mmhub4.2.0: add bounds checking for cid
drm/amdgpu/mmhub4.1.0: add bounds checking for cid
...
The valid range for the pulses-per-revolution devicetree property is
1..4. The current code checks for a range of 1..5. Fix it.
Declare the variable used to retrieve pulses per revolution from
devicetree as u32 (unsigned) to match the of_property_read_u32() API.
The current code uses a postfix decrement when writing the pulses per
resolution into the chip. This has no effect since the value is evaluated
before it is decremented. Fix it by decrementing before evaluating the
value.
Fixes: 7506ebcd662b ("hwmon: (max6639) : Configure based on DT property") Cc: Naresh Solanki <naresh.solanki@9elements.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* tag 'execve-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fs/tests: exec: Remove bad test vector
binfmt_elf_fdpic: fix AUXV size calculation for ELF_HWCAP3 and ELF_HWCAP4
init/Kconfig: Require a release version of clang-22 for CC_HAS_COUNTED_BY_PTR
Commit 150a04d817d8 ("compiler_types.h: Attributes: Add __counted_by_ptr
macro") used Clang 22.0.0 as a minimum supported version for
__counted_by_ptr, which made sense while 22.0.0 was the version of
LLVM's main branch to allow developers to easily test and develop uses
of __counted_by_ptr in their code. However, __counted_by_ptr requires a
change [1] merged towards the end of the 22 development cycle to avoid
errors when applied to void pointers.
In file included from fs/xfs/xfs_attr_inactive.c:18:
fs/xfs/libxfs/xfs_attr.h:59:2: error: 'counted_by' cannot be applied to a pointer with pointee of unknown size because 'void' is an incomplete type
59 | void *buffer __counted_by_ptr(bufsize);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is disruptive for deployed prerelease clang-22 builds (such as
Android LLVM) or when bisecting between llvmorg-21-init and the fix.
Require a released version of clang-22 (i.e., 21.1.0 or newer) to
enabled __counted_by_ptr to ensure all fixes needed for proper support
are present.
Remove any GFP_KERNEL arguments found in the new kmalloc_obj-family
helpers. This captures the script used in commit 189f164e573e ("Convert
remaining multi-line kmalloc_obj/flex GFP_KERNEL uses").
Linus Torvalds [Fri, 20 Mar 2026 16:58:56 +0000 (09:58 -0700)]
Merge tag 'io_uring-7.0-20260320' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- A bit of a work-around for AF_UNIX recv multishot, as the in-kernel
implementation doesn't properly signal EOF. We'll likely rework this
one going forward, but the fix is sufficient for now
- Two fixes for incrementally consumed buffers, for non-pollable files
and for 0 byte reads
* tag 'io_uring-7.0-20260320' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/kbuf: propagate BUF_MORE through early buffer commit path
io_uring/kbuf: fix missing BUF_MORE for incremental buffers at EOF
io_uring/poll: fix multishot recv missing EOF on wakeup race
Linus Torvalds [Fri, 20 Mar 2026 16:54:40 +0000 (09:54 -0700)]
Merge tag 'spi-fix-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's a couple of core fixes here from Johan, fixing a race
condition and an error handling path, plus a bunch of driver specific
fixups.
The Qualcomm issues could be nasty if you ran into them, especially
the DMA ordering one"
* tag 'spi-fix-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: geni-qcom: Check DMA interrupts early in ISR
spi: fix statistics allocation
spi: fix use-after-free on controller registration failure
spi: geni-qcom: Fix CPHA and CPOL mode change detection
spi: axiado: Fix double-free in ax_spi_probe()
spi: amlogic-spisg: Fix memory leak in aml_spisg_probe()
spi: amlogic: spifc-a4: Remove redundant clock cleanup
Linus Torvalds [Fri, 20 Mar 2026 16:52:45 +0000 (09:52 -0700)]
Merge tag 'regulator-fix-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Just one fix here from Hugo Villeneuve, the documentation for some of
the regulator DT properties had been cut'n'pasted so that if anyone
actually read it they'd be informed that those properties had
completely incorrect meanings"
* tag 'regulator-fix-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: fix typos in regulator-uv-* descriptions
Linus Torvalds [Fri, 20 Mar 2026 16:46:15 +0000 (09:46 -0700)]
Merge tag 'pmdomain-v7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- bcm: increase ASB control timeout for bcm2835
- mediatek: fix power domain count
* tag 'pmdomain-v7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: bcm: bcm2835-power: Increase ASB control timeout
pmdomain: mediatek: Fix power domain count
Linus Torvalds [Fri, 20 Mar 2026 16:38:12 +0000 (09:38 -0700)]
Merge tag 'ata-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- ADATA SU680 SSDs are causing command timeouts when LPM is enabled.
Enable the ATA_QUIRK_NOLPM quirk to prevent LPM from being enabled
on these devices (Damien)
- When receiving a REPORT SUPPORTED OPERATION CODES command with an
invalid REPORTING OPTIONS format, sense data should have the field
pointer set to byte 2 (the location of the REPORTING OPTIONS field)
instead of incorrectly pointing to byte 1 (Damien)
* tag 'ata-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: report correct sense field pointer in ata_scsiop_maint_in()
ata: libata-core: disable LPM on ADATA SU680 SSD
Linus Torvalds [Fri, 20 Mar 2026 16:34:32 +0000 (09:34 -0700)]
Merge tag 'mtd/fixes-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
- In SPI NOR, there was an issue with the RDCR capability, leading to
several platforms no longer capable of using it for wrong reasons
(the follow-up commit renames the helper to avoid future confusion)
- NAND controller drivers needed to be improved to fix some timings, a
locking schenario and avoid certain operations during panic writes
- The Spear600 DT binding conversion was done partially, leading to
several warnings which have individually been fixed
- Tudor gets replaced by Takahiro for the SPI NOR maintainance
- Plus two more misc fixes
* tag 'mtd/fixes-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: pl353: make sure optimal timings are applied
mtd: spi-nor: Rename spi_nor_spimem_check_op()
mtd: spi-nor: Fix RDCR controller capability core check
mtd: rawnand: brcmnand: skip DMA during panic write
mtd: rawnand: serialize lock/unlock against other NAND operations
dt-bindings: mtd: st,spear600-smi: Fix example
dt-bindings: mtd: st,spear600-smi: #address/size-cells is mandatory
dt-bindings: mtd: st,spear600-smi: Fix description
mtd: rawnand: cadence: Fix error check for dma_alloc_coherent() in cadence_nand_init()
mtd: Avoid boot crash in RedBoot partition table parser
MAINTAINERS: add Takahiro Kuwano as SPI NOR reviewer
MAINTAINERS: remove Tudor Ambarus as SPI NOR maintainer
projects / thirdparty / linux.git / log
