When inetdev_valid_mtu fails, cork->opt should be freed if it is
allocated in ip_setup_cork. Otherwise there could be a memleak.
Fixes: 501a90c94510 ("inet: protect against too small mtu values.") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240129091017.2938835-1-alexious@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
- Disallow families other than NFPROTO_{IPV4,IPV6,INET}.
- Disallow layer 4 protocol with no ports, since destination port is a
mandatory attribute for this object.
syzbot reported an interesting trace [1] caused by a stale sk->sk_wq
pointer in a closed llc socket.
In commit ff7b11aa481f ("net: socket: set sock->sk to NULL after
calling proto_ops::release()") Eric Biggers hinted that some protocols
are missing a sock_orphan(), we need to perform a full audit.
In net-next, I plan to clear sock->sk from sock_orphan() and
amend Eric patch to add a warning.
[1]
BUG: KASAN: slab-use-after-free in list_empty include/linux/list.h:373 [inline]
BUG: KASAN: slab-use-after-free in waitqueue_active include/linux/wait.h:127 [inline]
BUG: KASAN: slab-use-after-free in sock_def_write_space_wfree net/core/sock.c:3384 [inline]
BUG: KASAN: slab-use-after-free in sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468
Read of size 8 at addr ffff88802f4fc880 by task ksoftirqd/1/27
The buggy address belongs to the object at ffff88802f4fc800
which belongs to the cache sock_inode_cache of size 1408
The buggy address is located 128 bytes inside of
freed 1408-byte region [ffff88802f4fc800, ffff88802f4fcd80)
Memory state around the buggy address: ffff88802f4fc780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88802f4fc800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88802f4fc880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff88802f4fc900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88802f4fc980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 43815482370c ("net: sock_def_readable() and friends RCU conversion") Reported-and-tested-by: syzbot+32b89eaa102b372ff76d@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240126165532.3396702-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On a parisc64 kernel I sometimes notice this kernel warning:
Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8
The address 0x40ff8814 points to the in6addr_linklocal_allrouters
variable and the warning simply means that some ipv6 function tries to
read a 64-bit word directly from the not-64-bit aligned
in6addr_linklocal_allrouters variable.
Unaligned accesses are non-critical as the architecture or exception
handlers usually will fix it up at runtime. Nevertheless it may trigger
a performance penality for some architectures. For details read the
"unaligned-memory-access" kernel documentation.
The patch below ensures that the ipv6 loopback and router addresses will
always be naturally aligned. This prevents the unaligned accesses for
all architectures.
Signed-off-by: Helge Deller <deller@gmx.de> Fixes: 034dfc5df99eb ("ipv6: export in6addr_loopback to modules") Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
All error handling paths, except this one, go to 'out' where
release_swfw_sync() is called.
This call balances the acquire_swfw_sync() call done at the beginning of
the function.
Branch to the error handling path in order to correctly release some
resources in case of error.
Fixes: ae14a1d8e104 ("ixgbe: Fix IOSF SB access issues") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently ixgbe driver is notified of overheating events
via internal IXGBE_ERR_OVERTEMP error code.
Change the approach for handle_lasi() to use freshly introduced
is_overtemp function parameter which set when such event occurs.
Change check_overtemp() to bool and return true if overtemp
event occurs.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 93ab6cc69162 ("tcp: implement mmap() for zero copy receive") Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/ Reported-and-bisected-by: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: linux-mm@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Refactor frag-is-remappable test for tcp receive zerocopy. This is
part of a patch set that introduces short-circuited hybrid copies
for small receive operations, which results in roughly 33% fewer
syscalls for small RPC scenarios.
Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 577e4432f3ac ("tcp: add sanity checks to rx zerocopy") Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host
lock every time for deciding if error handler kthread needs to be waken up.
This can be too heavy in case of recovery, such as:
- N hardware queues
- queue depth is M for each hardware queue
- each scsi_host_busy() iterates over (N * M) tag/requests
If recovery is triggered in case that all requests are in-flight, each
scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called
for the last in-flight request, scsi_host_busy() has been run for (N * M -
1) times, and request has been iterated for (N*M - 1) * (N * M) times.
If both N and M are big enough, hard lockup can be triggered on acquiring
host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169).
Fix the issue by calling scsi_host_busy() outside the host lock. We don't
need the host lock for getting busy count because host the lock never
covers that.
[mkp: Drop unnecessary 'busy' variables pointed out by Bart]
Cc: Ewan Milne <emilne@redhat.com> Fixes: 6eb045e092ef ("scsi: core: avoid host-wide host_busy counter for scsi_mq") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20240112070000.4161982-1-ming.lei@redhat.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com> Tested-by: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Improve readability of the code in the SCSI core by introducing an
enumeration type for the values used internally that decide how to continue
processing a SCSI command. The eh_*_handler return values have not been
changed because that would involve modifying all SCSI drivers.
The output of the following command has been inspected to verify that no
out-of-range values are assigned to a variable of type enum
scsi_disposition:
KCFLAGS=-Wassign-enum make CC=clang W=1 drivers/scsi/
Link: https://lore.kernel.org/r/20210415220826.29438-6-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler") Signed-off-by: Sasha Levin <sashal@kernel.org>
Some pending include file cleanups produced this error:
In file included from include/linux/kernel.h:27,
from drivers/gpu/ipu-v3/ipu-dp.c:7:
include/drm/drm_color_mgmt.h: In function 'drm_color_lut_extract':
include/drm/drm_color_mgmt.h:45:46: error: implicit declaration of function 'mul_u32_u32' [-Werror=implicit-function-declaration]
45 | return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(user_input, (1 << bit_precision) - 1),
| ^~~~~~~~~~~
Replace rcu_dereference() with rcu_access_pointer() since we hold
the lock here (and aren't in an RCU critical section).
Fixes: 32af9a9e1069 ("wifi: cfg80211: free beacon_ies when overridden from hidden BSS") Reported-and-tested-by: syzbot+864a269c27ee06b58374@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Link: https://msgid.link/tencent_BF8F0DF0258C8DBF124CDDE4DD8D992DCF07@qq.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas reported that commit 652ffc2104ec ("perf/core: Fix narrow
startup race when creating the perf nr_addr_filters sysfs file") made
the entire attribute group vanish, instead of only the nr_addr_filters
attribute.
Additionally a stray return.
Insufficient coffee was involved with both writing and merging the
patch.
Fixes: 652ffc2104ec ("perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file") Reported-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lkml.kernel.org/r/20231122100756.GP8262@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
In function 'amdgpu_device_need_post(struct amdgpu_device *adev)' -
'adev->pm.fw' may not be released before return.
Using the function release_firmware() to release adev->pm.fw.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1571 amdgpu_device_need_post() warn: 'adev->pm.fw' from request_firmware() not released on lines: 1554.
Cc: Monk Liu <Monk.Liu@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In 'struct phm_ppm_table *ptr' allocation using kzalloc, an incorrect
structure type is passed to sizeof() in kzalloc, larger structure types
were used, thus using correct type 'struct phm_ppm_table' fixes the
below:
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/process_pptables_v1_0.c:203 get_platform_power_management_table() warn: struct type mismatch 'phm_ppm_table vs _ATOM_Tonga_PPM_Table'
Cc: Eric Huang <JinHuiEric.Huang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered
with the following blk_mq_get_driver_tag() in case of getting driver
tag failure.
Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe
the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime
blk_mq_mark_tag_wait() can't get driver tag successfully.
This issue can be reproduced by running the following test in loop, and
fio hang can be observed in < 30min when running it on my test VM
in laptop.
"
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=]
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~
In function ‘virtnet_find_vqs’,
inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534]
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~~~~~~~~~
drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=]
4552 | sprintf(vi->sq[i].name, "output.%d", i);
| ^~
In function ‘virtnet_find_vqs’,
inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534]
4552 | sprintf(vi->sq[i].name, "output.%d", i);
| ^~~~~~~~~~~
drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16
4552 | sprintf(vi->sq[i].name, "output.%d", i);
uniq() will write one command name over another causing the overwritten
string to be leaked. Fix by doing a pass that removes duplicates and a
second that removes the holes.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chenyuan Mi <cymi20@fudan.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231208000515.1693746-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a device with AER detects an error, it logs error information in its
own AER Error Status registers. It may send an Error Message to the Root
Port (RCEC in the case of an RCiEP), which logs the fact that an Error
Message was received (Root Error Status) and the Requester ID of the
message source (Error Source Identification).
aer_print_port_info() prints the Requester ID from the Root Port Error
Source in the usual Linux "bb:dd.f" format, but when find_source_device()
finds no error details in the hierarchy below the Root Port, it printed the
raw Requester ID without decoding it.
Decode the Requester ID in the usual Linux format so it matches other
messages.
Sample message changes:
- pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5
- pcieport 0000:00:1c.5: AER: can't find device of ID00e5
+ pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
+ pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5
Handling of S_ISGID is usually done by inode_init_owner() in all other
filesystems, but kernfs doesn't use that function. In kernfs, struct
kernfs_node is the primary data structure, and struct inode is only
created from it on demand. Therefore, inode_init_owner() can't be
used and we need to imitate its behavior.
S_ISGID support is useful for the cgroup filesystem; it allows
subtrees managed by an unprivileged process to retain a certain owner
gid, which then enables sharing access to the subtree with another
unprivileged process.
The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root
users to checkpoint and restore processes as non-root with CRIU.
This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option
'--shell-job' as non-root. CRIU's man-page describes the '--shell-job'
option like this:
Allow one to dump shell jobs. This implies the restored task will
inherit session and process group ID from the criu itself. This option
also allows to migrate a single external tty connection, to migrate
applications like top.
TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and
this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE.
With this change it is possible to checkpoint and restore processes
which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is
set.
Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Adrian Reber <areber@redhat.com> Acked-by: Andrei Vagin <avagin@gmail.com> Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A PCI device hot removal may occur while stdev->cdev is held open. The call
to stdev_release() then happens during close or exit, at a point way past
switchtec_pci_remove(). Otherwise the last ref would vanish with the
trailing put_device(), just before return.
At that later point in time, the devm cleanup has already removed the
stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted
one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause
a fatal page fault, and the subsequent dma_free_coherent(), if reached,
would pass a stale &stdev->pdev->dev pointer.
Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after
stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent
future accidents.
Reproducible via the script at
https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com
By running a Van Gogh device (Steam Deck), the following message
was noticed in the kernel log:
pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci
Effectively this means the quirk executed but changed nothing, since the
class of this device was already the proper one (likely adjusted by newer
firmware versions).
DO NOT access the underlying struct page of an sg table exported
by DMA-buf in dmabuf_imp_to_refs(), this is not allowed.
Please see drivers/dma-buf/dma-buf.c:mangle_sg_table() for details.
Fortunately, here (for special Xen device) we can avoid using
pages and calculate gfns directly from dma addresses provided by
the sg table.
Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://lore.kernel.org/r/20240107103426.2038075-1-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As per the Cadence IP document fixed the I2C clock divider value limit from
16 bits instead of 10 bits. Without this change setting up the I2C clock to
low frequencies will not work as the prescaler value might be greater than
10 bit number.
I3C clock divider value is 10 bits only. Updating the macro names for both.
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
warning in clang aims to catch these at compile time, which reveals:
arch/um/drivers/net_kern.c:353:21: warning: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Wincompatible-function-pointer-types-strict]
353 | .ndo_start_xmit = uml_net_start_xmit,
| ^~~~~~~~~~~~~~~~~~
1 warning generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of uml_net_start_xmit()
to match the prototype's to resolve the warning. While UML does not
currently implement support for kCFI, it could in the future, which
means this warning becomes a fatal CFI failure at run time.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310031340.v1vPh207-lkp@intel.com/ Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
The threads allocated inside the kernel have only a single page of
stack. Unfortunately, the vfprintf function in standard glibc may use
too much stack-space, overflowing it.
To make os_info safe to be used by helper threads, use the kernel
vscnprintf function into a smallish buffer and write out the information
to stderr.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Return value of container_of(...) can't be null, so null check is not
required for 'fence'. Hence drop its NULL check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c:93 to_amdgpu_amdkfd_fence() warn: can 'fence' even be NULL?
Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the rules for amdgpu_sync_resv to let KFD synchronize with VM
fences on page table reservations. This fixes intermittent memory
corruption after evictions when using amdgpu_vm_handle_moved to update
page tables for VM mappings managed through render nodes.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786.
Some motherboards require this bit to be set to 1 (= PCICLK mode),
otherwise the watchdog functionality gets broken. The BIOS of those
motherboards sets WDTCTRL bit 3 already to 1.
Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep
bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps
the status as set by the BIOS of the motherboard.
Watchdog tests have been successful with this patch with the following
systems:
IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2)
IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2)
IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L)
In cases where mapping of mpmu/apmu/apbc registers fails, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'pxa_unit' before returning.
In cases where kcalloc() fails for the 'clk_data->clks' allocation, the
code path does not handle the failure gracefully, potentially leading
to a memory leak. This fix ensures proper cleanup by freeing the
allocated memory for 'clk_data' before returning.
Releasing the `priv->lock` while iterating the `priv->multicast_list` in
`ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to
remove the items while in the middle of iteration. If the mcast is removed
while the lock was dropped, the for loop spins forever resulting in a hard
lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel):
Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below)
-----------------------------------+-----------------------------------
ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work)
spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...)
list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev)
&priv->multicast_list, list) |
ipoib_mcast_join(dev, mcast) |
spin_unlock_irq(&priv->lock) |
| spin_lock_irqsave(&priv->lock, flags)
| list_for_each_entry_safe(mcast, tmcast,
| &priv->multicast_list, list)
| list_del(&mcast->list);
| list_add_tail(&mcast->list, &remove_list)
| spin_unlock_irqrestore(&priv->lock, flags)
spin_lock_irq(&priv->lock) |
| ipoib_mcast_remove_list(&remove_list)
(Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast,
`priv->multicast_list` and we keep | remove_list, list)
spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done)
the other thread which is blocked |
and the list is still valid on |
it's stack.)
Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent
eventual sleeps.
Unfortunately we could not reproduce the lockup and confirm this fix but
based on the code review I think this fix should address such lockups.
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using 32 bit RGB formats, the RGA on the rk3568 produces wrong
colors as the wrong color channels are read or written. The reason is
that the format description for the channel swizzeling is wrong and the
wrong bits are configured. For example, when converting ARGB32 to NV12,
the alpha channel is used as blue channel.. This doesn't happen if the
color format is the same on both sides.
Fix the color_swap settings of the formats to correctly handle 32 bit
RGB formats.
For RGA_COLOR_FMT_XBGR8888, the RGA_COLOR_ALPHA_SWAP bit doesn't have an
effect. Thus, it isn't possible to handle the V4L2_PIX_FMT_XRGB32. Thus,
it is removed from the list of supported formats.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function stk1160_dbg gets called too many times, which causes
the output to get flooded with messages. Since stk1160_dbg uses
printk, it is now replaced with printk_ratelimited.
Suggested-by: Phillip Potter <phil@philpotter.co.uk> Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
After reading the code, I think this is what happens:
We have a DSI host defined in the device tree and a DSI peripheral under
that host (i.e. an i2c device using the DSI as data bus doesn't exhibit
this behavior).
The host driver calls mipi_dsi_host_register(), which causes (via a few
functions) mipi_dsi_device_add() to be called for the DSI peripheral. So
now we have a DSI device under the host, but attach hasn't been called.
Normally the probing of the devices continues, and eventually the DSI
peripheral's driver will call mipi_dsi_attach(), attaching the
peripheral.
However, if the host driver's probe encounters an error after calling
mipi_dsi_host_register(), and before the peripheral has called
mipi_dsi_attach(), the host driver will do cleanups and return an error
from its probe function. The cleanups include calling
mipi_dsi_host_unregister().
mipi_dsi_host_unregister() will call two functions for all its DSI
peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister().
The latter makes sense, as the device exists, but the former may be
wrong as attach has not necessarily been done.
To fix this, track the attached state of the peripheral, and only detach
from mipi_dsi_host_unregister() if the peripheral was attached.
Note that I have only tested this with a board with an i2c DSI
peripheral, not with a "pure" DSI peripheral.
However, slightly related, the unregister machinery still seems broken.
E.g. if the DSI host driver is unbound, it'll detach and unregister the
DSI peripherals. After that, when the DSI peripheral driver unbound
it'll call detach either directly or using the devm variant, leading to
a crash. And probably the driver will crash if it happens, for some
reason, to try to send a message via the DSI bus.
But that's another topic.
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921-dsi-detach-fix-v1-1-d0de2d1621d9@ideasonboard.com Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/gpu/drm/drm_framebuffer.c:654 drm_mode_getfb2_ioctl() error: uninitialized symbol 'ret'.
'ret' is possibly not set when there are no errors, causing the error
above. I can't say if that ever happens in real-life, but in any case I
think it is good to initialize 'ret' to 0.
drivers/gpu/drm/drm_file.c:967 drm_show_memory_stats() error: uninitialized symbol 'supported_status'.
'supported_status' is only set in one code path. I'm not familiar with
the code to say if that path will always be ran in real life, but
whether that is the case or not, I think it is good to initialize
'supported_status' to 0 to silence the warning (and possibly fix a bug).
If refcount is less than 1, we should just warn, unlock dentry and
return true, so that the caller doesn't try to do anything else.
Taking care of that leaves the rest of "lockref_put_return() has
failed" case equivalent to "decrement refcount and rejoin the
normal slow path after the point where we grab ->d_lock".
NOTE: lockref_put_return() is strictly a fastpath thing - unlike
the rest of lockref primitives, it does not contain a fallback.
Caller (and it looks like fast_dput() is the only legitimate one
in the entire kernel) has to do that itself. Reasons for
lockref_put_return() failures:
* ->d_lock held by somebody
* refcount <= 0
* ... or an architecture not supporting lockref use of
cmpxchg - sparc, anything non-SMP, config with spinlock debugging...
We could add a fallback, but it would be a clumsy API - we'd have
to distinguish between:
(1) refcount > 1 - decremented, lock not held on return
(2) refcount < 1 - left alone, probably no sense to hold the lock
(3) refcount is 1, no cmphxcg - decremented, lock held on return
(4) refcount is 1, cmphxcg supported - decremented, lock *NOT* held
on return.
We want to return with no lock held in case (4); that's the whole point of that
thing. We very much do not want to have the fallback in case (3) return without
a lock, since the caller might have to retake it in that case.
So it wouldn't be more convenient than doing the fallback in the caller and
it would be very easy to screw up, especially since the test coverage would
suck - no way to test (3) and (4) on the same kernel build.
Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The virtual widget example makes use of an undefined SND_SOC_DAPM_NOPM
argument passed to SND_SOC_DAPM_MIXER(). Replace with the correct
SND_SOC_NOPM definition.
In a couple of loops over the all streams, we check the bitmap against
the loop counter. A more correct reference would be, however, the
index of each stream, instead.
This patch corrects the check of bitmaps to the stream index.
Note that this change doesn't fix anything for now; all existing
drivers set up the stream indices properly, hence the loop count is
always equal with the stream index. That said, this change is only
for consistency.
Let's check return value of f2fs_reserve_new_block() in do_recover_data()
rather than letting it fails silently.
Also refactoring check condition on return value of f2fs_reserve_new_block()
as below:
- trigger f2fs_bug_on() only for ENOSPC case;
- use do-while statement to avoid redundant codes;
Currently, if a VF is disabled using the
'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still
able to receive traffic.
Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable'
to completely shutdown the VF's queues making it entirely disabled and
not able to receive or send any traffic.
Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable'
command to make a VF do reinitialization bringing the queues back up.
Co-developed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of an incomplete command or a command with a null identifier 2
reject packets will be sent, one with the identifier and one with 0.
Consuming the data of the command will prevent it.
This allows to send a reject packet for each corrupted command in a
multi-command packet.
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Set both WIDEBAND_SPEECH_SUPPORTED and VALID_LE_STATES quirks
for QCA2066.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is a more of a cosmetic fix. The branch will only be taken if
proberesp_ies is set, which implies that beacon_ies is not set unless we
are connected to an AP that just did a channel switch. And, in that case
we should have found the BSS in the internal storage to begin with.
Upon assembling the array, both kernel and mdadm allow the devices to have event
counter difference of 1, and still consider them as up-to-date.
However, a device whose event count is behind by 1, may in fact not be up-to-date,
and array resync with such a device may cause data corruption.
To avoid this, consult the superblock of the freshest device about the status
of a device, whose event counter is behind by 1.
mv88e6xxx_get_stats, which collects stats from various sources,
expects all callees to return the number of stats read. If an error
occurs, 0 should be returned.
Prevent future mishaps of this kind by updating the return type to
reflect this contract.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'.
Change it to fix the following dt-schema warning.
imx28-apf28.dtb: dma-apbx@80024000: $nodename:0: 'dma-apbx@80024000' does not match '^dma-controller(@.*)?$'
from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#
The 'gpios' property to describe the SDA and SCL GPIOs is considered
deprecated according to i2c-gpio.yaml.
Switch to the preferred 'sda-gpios' and 'scl-gpios' properties.
This fixes the following schema warnings:
imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
Per leds-gpio.yaml, the led names should start with 'led'.
Change it to fix the following dt-schema warning:
imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
Per display-timings.yaml, the 'timing' pattern should be used to
describe the display timings.
Change it accordingly to fix the following dt-schema warning:
imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
Per imx-iim.yaml, the compatible string should only contain a single
entry.
Use it as "fsl,imx25-iim" to fix the following dt-schema warning:
imx25-karo-tx25.dtb: efuse@53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long
from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#
Since "dev_search_path" can technically be as large as PATH_MAX,
there was a risk of truncation when copying it and a second string
into "full_path" since it was also PATH_MAX sized. The W=1 builds were
reporting this warning:
drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra':
drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~
In function 'rnbd_srv_get_full_path',
inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
617 | dev_search_path, dev_name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
To fix this, unconditionally check for truncation (as was already done
for the case where "%SESSNAME%" was present).
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312100355.lHoJPgKy-lkp@intel.com/ Cc: Md. Haris Iqbal <haris.iqbal@ionos.com> Cc: Jack Wang <jinpu.wang@ionos.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <linux-block@vger.kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20231212214738.work.169-kees@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Per sram.yaml, address-cells, size-cells and ranges are mandatory.
The node name should be sram.
Change the node name and pass the required properties to fix the
following dt-schema warnings:
imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?'
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern.
Change it to 'flash@0,0' to fix the following dt-schema warning:
imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#
Node names should be generic. Use 'rtc' as node name to fix
the following dt-schema warning:
imx25-eukrea-mbimxsd25-baseboard.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#
generic_map_{delete,update}_batch() doesn't set uattr->batch.count as
zero before it tries to allocate memory for key. If the memory
allocation fails, the value of uattr->batch.count will be incorrect.
Fix it by setting uattr->batch.count as zero beore batched update or
deletion.
We should set the status to FC_TIMED_OUT when a timeout error is passed to
fc_fcp_rec_error().
Signed-off-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20231129165832.224100-3-hare@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current FC error recovery is sending up to three REC (recovery) frames
in 10 second intervals, and as a final step sending an ABTS after 30
seconds for the command itself. Unfortunately sending an ABTS is also the
action for the SCSI abort handler, and the default timeout for SCSI
commands is also 30 seconds. This causes two ABTS to be scheduled, with the
libfc one slightly earlier. The ABTS scheduled by SCSI EH then sees the
command to be already aborted, and will always return with a 'GOOD' status
irrespective on the actual result from the first ABTS. This causes the
SCSI EH abort handler to always succeed, and SCSI EH never to be engaged.
Fix this by not issuing an ABTS when a SCSI command is present for the
exchange, but rather wait for the abort scheduled from SCSI EH. And warn
if an abort is already scheduled to avoid similar errors in the future.
Signed-off-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20231129165832.224100-2-hare@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
map is the pointer of outer map, and need_defer needs some explanation.
need_defer tells the implementation to defer the reference release of
the passed element and ensure that the element is still alive before
the bpf program, which may manipulate it, exits.
The following three cases will invoke map_fd_put_ptr() and different
need_defer values will be passed to these callers:
1) release the reference of the old element in the map during map update
or map deletion. The release must be deferred, otherwise the bpf
program may incur use-after-free problem, so need_defer needs to be
true.
2) release the reference of the to-be-added element in the error path of
map update. The to-be-added element is not visible to any bpf
program, so it is OK to pass false for need_defer parameter.
3) release the references of all elements in the map during map release.
Any bpf program which has access to the map must have been exited and
released, so need_defer=false will be OK.
These two parameters will be used by the following patches to fix the
potential use-after-free problem for map-in-map.
Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug
occurs when txs->cnt, data from a URB provided by a USB device, is
bigger than the size of the array txs->txstatus, which is
HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug
handling code after the check. Make the function return if that is the
case.
Found by a modified version of syzkaller.
UBSAN: array-index-out-of-bounds in htc_drv_txrx.c
index 13 is out of range for type '__wmi_event_txstatus [12]'
Call Trace:
ath9k_htc_txstatus
ath9k_wmi_event_tasklet
tasklet_action_common
__do_softirq
irq_exit_rxu
sysvec_apic_timer_interrupt
nand-controller.yaml bindings says #size-cells shall be set to 0.
Fixes the dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: nand-controller@33002000:
#size-cells:0:0: 0 was expected
from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
imx7d-lcdif is compatible to imx6sx-lcdif. MXSFB_V6 supports overlay
by using LCDC_AS_CTRL register. This registers used by overlay plane:
* LCDC_AS_CTRL
* LCDC_AS_BUF
* LCDC_AS_NEXT_BUF
are listed in i.MX7D RM as well.
imx7d uses two ports for 'in-ports', so the syntax port@<num> has to
be used. imx7d has both port and port@1 nodes present, raising these
error:
funnel@30041000: in-ports: More than one condition true in oneOf schema
funnel@30041000: Unevaluated properties are not allowed
('in-ports' was unexpected)
If failed to allocate "tags" or could not find the final upper device from
start_dev's upper list in bond_verify_device_path(), only the loopback
detection of the current upper device should be affected, and the system is
no need to be panic.
So return -ENOMEM in alb_upper_dev_walk to stop walking, print some warn
information when failed to allocate memory for vlan tags in
bond_verify_device_path.
I also think that the following function calls
netdev_walk_all_upper_dev_rcu
---->>>alb_upper_dev_walk
---------->>>bond_verify_device_path
From this way, "end device" can eventually be obtained from "start device"
in bond_verify_device_path, IS_ERR(tags) could be instead of
IS_ERR_OR_NULL(tags) in alb_upper_dev_walk.
Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a
reset (i.e., they advertise NoSoftRst-). However, this transition does
not have any effect on the device: It continues to be operational and
network ports remain up. Advertising this support makes it seem as if a
PM reset is viable for these devices. Mark it as unavailable to skip it
when testing reset methods.
Before:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
pm bus
After:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
bus
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Because file_name and phba->ModelName are both declared a size 80 bytes,
the extra ".grp" file extension could cause an overflow into file_name.
Define a ELX_FW_NAME_SIZE macro with value 84. 84 incorporates the 4 extra
characters from ".grp". file_name is changed to be declared as a char and
initialized to zeros i.e. null chars.
Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20231031191224.150862-3-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
