The dev_err message is reporting an error about capture streams however
it is using the incorrect variable num_playback instead of num_capture.
Fix this by using the correct variable num_capture.
Fixes: a1d1e266b445 ("ASoC: SOF: Intel: Add Intel specific HDA stream operations") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20250902120639.2626861-1-colin.i.king@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 51b2bb3f2568 ("ASoC: wm8974: configure pll and mclk divider automatically") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250821082639.1301453-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 294833fc9eb4 ("ASoC: wm8940: Rewrite code to set proper clocks") Reported-by: Ankur Tyagi <ankur.tyagi85@gmail.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Ankur Tyagi <ankur.tyagi85@gmail.com> Link: https://patch.msgid.link/20250821082639.1301453-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
fc582cd26e88 ("io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU")
fixed an issue with not deferring freeing of io_kiocb structs that
msg_ring allocates to after the current RCU grace period. But this only
covers requests that don't end up in the allocation cache. If a request
goes into the alloc cache, it can get reused before it is sane to do so.
A recent syzbot report would seem to indicate that there's something
there, however it may very well just be because of the KASAN poisoning
that the alloc_cache handles manually.
Rather than attempt to make the alloc_cache sane for that use case, just
drop the usage of the alloc_cache for msg_ring request payload data.
When running task_work for an exiting task, rather than perform the
issue retry attempt, the task_work is canceled. However, this isn't
done for a ring that has been closed. This can lead to requests being
successfully completed post the ring being closed, which is somewhat
confusing and surprising to an application.
Rather than just check the task exit state, also include the ring
ref state in deciding whether or not to terminate a given request when
run from task_work.
When the taks that submitted a request is dying, a task work for that
request might get run by a kernel thread or even worse by a half
dismantled task. We can't just cancel the task work without running the
callback as the cmd might need to do some clean up, so pass a flag
instead. If set, it's not safe to access any task resources and the
callback is expected to cancel the cmd ASAP.
Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the failing scenarios (TCP -> MPTCP), the involved sockets are
actually plain TCP ones, as fallbacks for passive sockets at 2WHS time
cause the MPTCP listeners to actually create 'plain' TCP sockets.
Similar to commit 218cc166321f ("selftests: mptcp: avoid spurious errors
on disconnect"), the root cause is in the user-space bits: the test
program tries to disconnect as soon as all the pending data has been
spooled, generating an RST. If such option reaches the peer before the
connection has reached the closed status, the TCP socket will report an
error to the user-space, as per protocol specification, causing the
above failure. Note that it looks like this issue got more visible since
the "tcp: receiver changes" series from commit 06baf9bfa6ca ("Merge
branch 'tcp-receiver-changes'").
Address the issue by explicitly waiting for the TCP sockets (-t) to
reach a closed status before performing the disconnect. More precisely,
the test program now waits for plain TCP sockets or TCP subflows in
addition to the MPTCP sockets that were already monitored.
While at it, use 'ss' with '-n' to avoid resolving service names, which
is not needed here.
Fixes: 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-3-d40e77cbbf02@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IO errors were correctly printed to stderr, and propagated up to the
main loop for the server side, but the returned value was ignored. As a
consequence, the program for the listener side was no longer exiting
with an error code in case of IO issues.
Because of that, some issues might not have been seen. But very likely,
most issues either had an effect on the client side, or the file
transfer was not the expected one, e.g. the connection got reset before
the end. Still, it is better to fix this.
The main consequence of this issue is the error that was reported by the
selftests: the received and sent files were different, and the MIB
counters were not printed. Also, when such errors happened during the
'disconnect' tests, the program tried to continue until the timeout.
Now when an IO error is detected, the program exits directly with an
error.
When the MPTCP DATA FIN have been ACKed, there is no more MPTCP related
metadata to exchange, and all subflows can be safely shutdown.
Before this patch, the subflows were actually terminated at 'close()'
time. That's certainly fine most of the time, but not when the userspace
'shutdown()' a connection, without close()ing it. When doing so, the
subflows were staying in LAST_ACK state on one side -- and consequently
in FIN_WAIT2 on the other side -- until the 'close()' of the MPTCP
socket.
Now, when the DATA FIN have been ACKed, all subflows are shutdown. A
consequence of this is that the TCP 'FIN' flag can be set earlier now,
but the end result is the same. This affects the packetdrill tests
looking at the end of the MPTCP connections, but for a good reason.
Note that tcp_shutdown() will check the subflow state, so no need to do
that again before calling it.
Fixes: 3721b9b64676 ("mptcp: Track received DATA_FIN sequence number and add related helpers") Cc: stable@vger.kernel.org Fixes: 16a9a9da1723 ("mptcp: Add helper to process acks of DATA_FIN") Reviewed-by: Mat Martineau <martineau@kernel.org> Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-1-d40e77cbbf02@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to increment i_fastreg_wrs before we bail out from
rds_ib_post_reg_frmr().
We have a fixed budget of how many FRWR operations that can be
outstanding using the dedicated QP used for memory registrations and
de-registrations. This budget is enforced by the atomic_t
i_fastreg_wrs. If we bail out early in rds_ib_post_reg_frmr(), we will
"leak" the possibility of posting an FRWR operation, and if that
accumulates, no FRWR operation can be carried out.
Fixes: 1659185fb4d0 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode") Fixes: 3a2886cca703 ("net/rds: Keep track of and wait for FRWR segments in use upon shutdown") Cc: stable@vger.kernel.org Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20250911133336.451212-1-haakon.bugge@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from
device property") rfkill_find_type() gets called with the possibly
uninitialized "const char *type_name;" local variable.
On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752"
acpi_device, the rfkill->type is set based on the ACPI acpi_device_id:
rfkill->type = (unsigned)id->driver_data;
and there is no "type" property so device_property_read_string() will fail
and leave type_name uninitialized, leading to a potential crash.
rfkill_find_type() does accept a NULL pointer, fix the potential crash
by initializing type_name to NULL.
Note likely sofar this has not been caught because:
1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device
2. The stack happened to contain NULL where type_name is stored
Fixes: 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20250913113515.21698-1-hansg@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why&How]
As reported on https://gitlab.freedesktop.org/drm/amd/-/issues/3936,
SMU hang can occur if the interrupts are not enabled appropriately,
causing a vblank timeout.
This patch reverts commit 5009628d8509 ("drm/amd/display: Remove unnecessary
amdgpu_irq_get/put"), but only for RX6xxx & RX7700 GPUs, on which the
issue was observed.
This will re-enable interrupts regardless of whether the user space needed
it or not.
Fixes: 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3936 Suggested-by: Sun peng Li <sunpeng.li@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 95d168b367aa28a59f94fc690ff76ebf69312c6d) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3bbf3565f48c ("svm: Do not intercept CR8 when enable AVIC")
inhibited pre-VMRUN sync of TPR from LAPIC into VMCB::V_TPR in
sync_lapic_to_cr8() when AVIC is active.
AVIC does automatically sync between these two fields, however it does
so only on explicit guest writes to one of these fields, not on a bare
VMRUN.
This meant that when AVIC is enabled host changes to TPR in the LAPIC
state might not get automatically copied into the V_TPR field of VMCB.
This is especially true when it is the userspace setting LAPIC state via
KVM_SET_LAPIC ioctl() since userspace does not have access to the guest
VMCB.
Practice shows that it is the V_TPR that is actually used by the AVIC to
decide whether to issue pending interrupts to the CPU (not TPR in TASKPRI),
so any leftover value in V_TPR will cause serious interrupt delivery issues
in the guest when AVIC is enabled.
Fix this issue by doing pre-VMRUN TPR sync from LAPIC into VMCB::V_TPR
even when AVIC is enabled.
Fixes: 3bbf3565f48c ("svm: Do not intercept CR8 when enable AVIC") Cc: stable@vger.kernel.org Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org> Link: https://lore.kernel.org/r/c231be64280b1461e854e1ce3595d70cde3a2e9d.1756139678.git.maciej.szmigiero@oracle.com
[sean: tag for stable@] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The q6i2s_set_fmt() function was defined but never linked into the
I2S DAI operations, resulting DAI format settings is being ignored
during stream setup. This change fixes the issue by properly linking
the .set_fmt handler within the DAI ops.
Fixes: 30ad723b93ade ("ASoC: qdsp6: audioreach: add q6apm lpass dai support") Cc: stable@vger.kernel.org Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Message-ID: <20250908053631.70978-3-mohammad.rafi.shaik@oss.qualcomm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If earlier opening of source graph fails (e.g. ADSP rejects due to
incorrect audioreach topology), the graph is closed and
"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink
graph continues though and next call to q6apm_lpass_dai_prepare()
receives dai_data->graph[dai->id]=NULL leading to NULL pointer
exception:
qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd
qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
...
Call trace:
q6apm_graph_media_format_pcm+0x48/0x120 (P)
q6apm_lpass_dai_prepare+0x110/0x1b4
snd_soc_pcm_dai_prepare+0x74/0x108
__soc_pcm_prepare+0x44/0x160
dpcm_be_dai_prepare+0x124/0x1c0
Fixes: 30ad723b93ad ("ASoC: qdsp6: audioreach: add q6apm lpass dai support") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250904101849.121503-2-krzysztof.kozlowski@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix missing lpaif_type configuration for the I2S interface.
The proper lpaif interface type required to allow DSP to vote
appropriate clock setting for I2S interface.
[BUG]
Inside check_inode_ref(), we need to make sure every structure,
including the btrfs_inode_extref header, is covered by the item. But
our code is incorrectly using "sizeof(iref)", where @iref is just a
pointer.
This means "sizeof(iref)" will always be "sizeof(void *)", which is much
smaller than "sizeof(struct btrfs_inode_extref)".
This will allow some bad inode extrefs to sneak in, defeating tree-checker.
[FIX]
Fix the typo by calling "sizeof(*iref)", which is the same as
"sizeof(struct btrfs_inode_extref)", and will be the correct behavior we
want.
Fixes: 71bf92a9b877 ("btrfs: tree-checker: Add check for INODE_REF") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AMD IOMMU host page table implementation supports dynamic page table levels
(up to 6 levels), starting with a 3-level configuration that expands based on
IOVA address. The kernel maintains a root pointer and current page table level
to enable proper page table walks in alloc_pte()/fetch_pte() operations.
The IOMMU IOVA allocator initially starts with 32-bit address and onces its
exhuasted it switches to 64-bit address (max address is determined based
on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU
driver increases page table level.
But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads
pgtable->[root/mode] without lock. So its possible that in exteme corner case,
when increase_address_space() is updating pgtable->[root/mode], fetch_pte()
reads wrong page table level (pgtable->mode). It does compare the value with
level encoded in page table and returns NULL. This will result is
iommu_unmap ops to fail and upper layer may retry/log WARN_ON.
CPU 0 CPU 1
------ ------
map pages unmap pages
alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte()
pgtable->root = pte (new root value)
READ pgtable->[mode/root]
Reads new root, old mode
Updates mode (pgtable->mode += 1)
Since Page table level updates are infrequent and already synchronized with a
spinlock, implement seqcount to enable lock-free read operations on the read path.
switch_to_super_page() assumes the memory range it's working on is aligned
to the target large page level. Unfortunately, __domain_mapping() doesn't
take this into account when using it, and will pass unaligned ranges
ultimately freeing a PTE range larger than expected.
Take for example a mapping with the following iov_pfn range [0x3fe400,
0x4c0600), which should be backed by the following mappings:
iov_pfn [0x3fe400, 0x3fffff] covered by 2MiB pages
iov_pfn [0x400000, 0x4bffff] covered by 1GiB pages
iov_pfn [0x4c0000, 0x4c05ff] covered by 2MiB pages
Under this circumstance, __domain_mapping() will pass [0x400000, 0x4c05ff]
to switch_to_super_page() at a 1 GiB granularity, which will in turn
free PTEs all the way to iov_pfn 0x4fffff.
Mitigate this by rounding down the iov_pfn range passed to
switch_to_super_page() in __domain_mapping()
to the target large page level.
Additionally add range alignment checks to switch_to_super_page.
Fixes: 9906b9352a35 ("iommu/vt-d: Avoid duplicate removing in __domain_mapping()") Signed-off-by: Eugene Koira <eugkoira@amazon.com> Cc: stable@vger.kernel.org Reviewed-by: Nicolas Saenz Julienne <nsaenz@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20250826143816.38686-1-eugkoira@amazon.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARCH_STRICT_ALIGN is used for hardware without UAL, now it only control
the -mstrict-align flag. However, ACPI structures are packed by default
so will cause unaligned accesses.
To avoid this, define ACPI_MISALIGNMENT_NOT_SUPPORTED in asm/acenv.h to
align ACPI structures if ARCH_STRICT_ALIGN enabled.
Add a NULL-pointer check after the kcalloc() call in init_vdso(). If
allocation fails, return -ENOMEM to prevent a possible dereference of
vdso_info.code_mapping.pages when it is NULL.
Cc: stable@vger.kernel.org Fixes: 2ed119aef60d ("LoongArch: Set correct size for vDSO code mapping") Signed-off-by: Guangshuo Li <202321181@mail.sdu.edu.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When testing the kernel live patching with "modprobe livepatch-sample",
there is a timeout over 15 seconds from "starting patching transition"
to "patching complete". The dmesg command shows "unreliable stack" for
user tasks in debug mode, here is one of the messages:
livepatch: klp_try_switch_task: bash:1193 has an unreliable stack
The "unreliable stack" is because it can not unwind from do_syscall()
to its previous frame handle_syscall(). It should use fp to find the
original stack top due to secondary stack in do_syscall(), but fp is
not used for some other functions, then fp can not be restored by the
next frame of do_syscall(), so it is necessary to save fp if task is
not current, in order to get the stack top of do_syscall().
When compiling with LLVM and CONFIG_RUST is set, there exists the
following objtool warning:
rust/compiler_builtins.o: warning: objtool: __rust__unordsf2(): unexpected end of section .text.unlikely.
objdump shows that the end of section .text.unlikely is an atomic
instruction:
amswap.w $zero, $ra, $zero
According to the LoongArch Reference Manual, if the amswap.w atomic
memory access instruction has the same register number as rd and rj,
the execution will trigger an Instruction Non-defined Exception, so
mark the above instruction as INSN_BUG type to fix the warning.
Loongson-3A6000 and 3C6000 CPUs also support unaligned memory access, so
the current description is out of date to some extent.
Actually, all of Loongson-3 series processors based on LoongArch support
unaligned memory access, this hardware capability is indicated by the bit
20 (UAL) of CPUCFG1 register, update the help info to reflect the reality.
In the current implementation of longterm pin_user_pages(), we invoke
collect_longterm_unpinnable_folios(). This function iterates through the
list to check whether each folio belongs to the "longterm_unpinnabled"
category. The folios in this list essentially correspond to a contiguous
region of userspace addresses, with each folio representing a physical
address in increments of PAGESIZE.
If this userspace address range is mapped with large folio, we can
optimize the performance of function collect_longterm_unpinnable_folios()
by reducing the using of READ_ONCE() invoked in
pofs_get_folio()->page_folio()->_compound_head().
Also, we can simplify the logic of collect_longterm_unpinnable_folios().
Instead of comparing with prev_folio after calling pofs_get_folio(), we
can check whether the next page is within the same folio.
The performance test results, based on v6.15, obtained through the
gup_test tool from the kernel source tree are as follows. We achieve an
improvement of over 66% for large folio with pagesize=2M. For small
folio, we have only observed a very slight degradation in performance.
Without this patch:
[root@localhost ~] ./gup_test -HL -m 8192 -n 512
TAP version 13
1..1
# PIN_LONGTERM_BENCHMARK: Time: get:14391 put:10858 us#
ok 1 ioctl status 0
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
[root@localhost ~]# ./gup_test -LT -m 8192 -n 512
TAP version 13
1..1
# PIN_LONGTERM_BENCHMARK: Time: get:130538 put:31676 us#
ok 1 ioctl status 0
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
With this patch:
[root@localhost ~] ./gup_test -HL -m 8192 -n 512
TAP version 13
1..1
# PIN_LONGTERM_BENCHMARK: Time: get:4867 put:10516 us#
ok 1 ioctl status 0
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
[root@localhost ~]# ./gup_test -LT -m 8192 -n 512
TAP version 13
1..1
# PIN_LONGTERM_BENCHMARK: Time: get:131798 put:31328 us#
ok 1 ioctl status 0
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
[lizhe.67@bytedance.com: whitespace fix, per David] Link: https://lkml.kernel.org/r/20250606091917.91384-1-lizhe.67@bytedance.com Link: https://lkml.kernel.org/r/20250606023742.58344-1-lizhe.67@bytedance.com Signed-off-by: Li Zhe <lizhe.67@bytedance.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dev Jain <dev.jain@arm.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's a possible integer overflow in stripe_io_hints if we have too
large chunk size. Test if the overflow happened, and if it did, don't set
limits->io_min and limits->io_opt;
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Suggested-by: Dongsheng Yang <dongsheng.yang@linux.dev> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are fuel gauges in the bq27xxx series (e.g. bq27z561) which may in some
cases report 0xff as the value of BQ27XXX_REG_FLAGS that should not be
interpreted as "no battery" like for a disconnected battery with some built
in bq27000 chip.
So restrict the no-battery detection originally introduced by
as soon as user-space is finding a /sys entry and trying to read the
"status" property.
It turns out that the offending commit changes the logic to now return the
value of cache.flags if it is <0. This is likely under the assumption that
it is an error number. In normal errors from bq27xxx_read() this is indeed
the case.
But there is special code to detect if no bq27000 is installed or accessible
through hdq/1wire and wants to report this. In that case, the cache.flags
are set historically by
to constant -1 which did make reading properties return -ENODEV. So everything
appeared to be fine before the return value was passed upwards.
Now the -1 is returned as -EPERM instead of -ENODEV, triggering the error
condition in power_supply_format_property() which then floods the console log.
So we change the detection of missing bq27000 battery to simply set
cache.flags = -ENODEV
instead of -1.
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy") Cc: Jerry Lv <Jerry.Lv@axis.com> Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/692f79eb6fd541adb397038ea6e750d4de2deddf.1755945297.git.hns@goldelico.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing.
Fixes: 8ff590903d5 ("crypto: algif_skcipher - User-space interface for skcipher operations") Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg> Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the kobject of the kset for /sys/fs/nilfs2 is initialized, its ktype
is set to kset_ktype, which has a ->sysfs_ops of kobj_sysfs_ops. When
nilfs_feature_attr_group is added to that kobject via
sysfs_create_group(), the kernfs_ops of each files is sysfs_file_kfops_rw,
which will call sysfs_kf_seq_show() when ->seq_show() is called.
sysfs_kf_seq_show() in turn calls kobj_attr_show() through
->sysfs_ops->show(). kobj_attr_show() casts the provided attribute out to
a 'struct kobj_attribute' via container_of() and calls ->show(), resulting
in the CFI violation since neither nilfs_feature_revision_show() nor
nilfs_feature_README_show() match the prototype of ->show() in 'struct
kobj_attribute'.
Resolve the CFI violation by adjusting the second parameter in
nilfs_feature_{revision,README}_show() from 'struct attribute' to 'struct
kobj_attribute' to match the expected prototype.
If data_offset and data_length of smb_direct_data_transfer struct are
invalid, out of bounds issue could happen.
This patch validate data_offset and data_length field in recv_done.
Cc: stable@vger.kernel.org Fixes: 2ea086e35c3d ("ksmbd: add buffer validation for smb direct") Reviewed-by: Stefan Metzmacher <metze@samba.org> Reported-by: Luigino Camastra, Aisle Research <luigino.camastra@aisle.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The perf_fuzzer found a hard-lockup crash on a RaptorLake machine:
Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000
CPU: 23 UID: 0 PID: 0 Comm: swapper/23
Tainted: [W]=WARN
Hardware name: Dell Inc. Precision 9660/0VJ762
RIP: 0010:native_read_pmc+0x7/0x40
Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ...
RSP: 000:fffb03100273de8 EFLAGS: 00010046
....
Call Trace:
<TASK>
icl_update_topdown_event+0x165/0x190
? ktime_get+0x38/0xd0
intel_pmu_read_event+0xf9/0x210
__perf_event_read+0xf9/0x210
CPUs 16-23 are E-core CPUs that don't support the perf metrics feature.
The icl_update_topdown_event() should not be invoked on these CPUs.
It's a regression of commit:
f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read")
The bug introduced by that commit is that the is_topdown_event() function
is mistakenly used to replace the is_topdown_count() call to check if the
topdown functions for the perf metrics feature should be invoked.
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug.
Fixes: 2958d17a8984 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug.
The expression `(conf->instr_type == 64) << iq_no` can overflow because
`iq_no` may be as high as 64 (`CN23XX_MAX_RINGS_PER_PF`). Casting the
operand to `u64` ensures correct 64-bit arithmetic.
Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit d24341740fe48add8a227a753e68b6eedf4b385a.
It causes errors when trying to configure QoS, as well as
loss of L2 connectivity (on multi-host devices).
Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/20250910170011.70528106@kernel.org Fixes: d24341740fe4 ("net/mlx5e: Update and set Xon/Xoff upon port speed set") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Normally we wait for the socket to buffer up the whole record
before we service it. If the socket has a tiny buffer, however,
we read out the data sooner, to prevent connection stalls.
Make sure that we abort the connection when we find out late
that the record is actually invalid. Retrying the parsing is
fine in itself but since we copy some more data each time
before we parse we can overflow the allocated skb space.
Constructing a scenario in which we're under pressure without
enough data in the socket to parse the length upfront is quite
hard. syzbot figured out a way to do this by serving us the header
in small OOB sends, and then filling in the recvbuf with a large
normal send.
Make sure that tls_rx_msg_size() aborts strp, if we reach
an invalid record there's really no way to recover.
Reported-by: Lee Jones <lee@kernel.org> Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser") Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250917002814.1743558-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk
in the TCP_ESTABLISHED state. [0]
syzbot reused the server-side TCP Fast Open socket as a new client before
the TFO socket completes 3WHS:
1. accept()
2. connect(AF_UNSPEC)
3. connect() to another destination
As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes
it to TCP_CLOSE and makes connect() possible, which restarts timers.
Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the
retransmit timer triggered the warning and the intended packet was not
retransmitted.
Let's call reqsk_fastopen_remove() in tcp_disconnect().
Currently, VF MAC address info is not updated when the MAC address is
configured from VF, and it is not cleared when the VF is removed. This
leads to stale or missing MAC information in the PF, which may cause
incorrect state tracking or inconsistencies when VFs are hot-plugged
or reassigned.
Fix this by:
- storing the VF MAC address in the PF when it is set from VF
- clearing the stored VF MAC address when the VF is removed
This ensures that the PF always has correct VF MAC state.
Fixes: cde29af9e68e ("octeon_ep: add PF-VF mailbox communication") Signed-off-by: Sathesh B Edara <sedara@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250916133207.21737-1-sedara@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unlike IPv4, IPv6 routing strictly requires the source address to be valid
on the outgoing interface. If the NS target is set to a remote VLAN interface,
and the source address is also configured on a VLAN over a bond interface,
setting the oif to the bond device will fail to retrieve the correct
destination route.
Fix this by not setting the oif to the bond device when retrieving the NS
target destination. This allows the correct destination device (the VLAN
interface) to be determined, so that bond_verify_device_path can return the
proper VLAN tags for sending NS messages.
Reported-by: David Wilder <wilder@us.ibm.com> Closes: https://lore.kernel.org/netdev/aGOKggdfjv0cApTO@fedora/ Suggested-by: Jay Vosburgh <jv@jvosburgh.net> Tested-by: David Wilder <wilder@us.ibm.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20250916080127.430626-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1757939074-617281-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When igc_led_setup() fails, igc_probe() fails and triggers kernel panic
in free_netdev() since unregister_netdev() is not called. [1]
This behavior can be tested using fault-injection framework, especially
the failslab feature. [2]
Since LED support is not mandatory, treat LED setup failures as
non-fatal and continue probe with a warning message, consequently
avoiding the kernel panic.
i40e has a feature which writes to memory location last descriptor
successfully sent. Memory barrier in i40e_clean_tx_irq() was used to
avoid forward-reading descriptor fields in case DD bit was not set.
Having mentioned feature in place implies that such situation will not
happen as we know in advance how many descriptors HW has dealt with.
Besides, this barrier placement was wrong. Idea is to have this
protection *after* reading DD bit from HW descriptor, not before.
Digging through git history showed me that indeed barrier was before DD
bit check, anyways the commit introducing i40e_get_head() should have
wiped it out altogether.
Also, there was one commit doing s/read_barrier_depends/smp_rmb when get
head feature was already in place, but it was only theoretical based on
ixgbe experiences, which is different in these terms as that driver has
to read DD bit from HW descriptor.
Fixes: 1943d8ba9507 ("i40e/i40evf: enable hardware feature head write back") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each
buffer in the current frame. This function was introduced as part of
handling multi-buffer XDP support in the ice driver.
It works by iterating over the buffers from first_desc up to 1 plus the
total number of fragments in the frame, cached from before the XDP program
was executed.
If the hardware posts a descriptor with a size of 0, the logic used in
ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added
as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a
fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't
call ice_put_rx_buf().
Because we don't call ice_put_rx_buf(), we don't attempt to re-use the
page or free it. This leaves a stale page in the ring, as we don't
increment next_to_alloc.
The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented
properly, and that it always points to a buffer with a NULL page. Since
this function doesn't check, it will happily recycle a page over the top
of the next_to_alloc buffer, losing track of the old page.
Note that this leak only occurs for multi-buffer frames. The
ice_put_rx_mbuf() function always handles at least one buffer, so a
single-buffer frame will always get handled correctly. It is not clear
precisely why the hardware hands us descriptors with a size of 0 sometimes,
but it happens somewhat regularly with "jumbo frames" used by 9K MTU.
To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on
all buffers between first_desc and next_to_clean. Borrow the logic of a
similar function in i40e used for this same purpose. Use the same logic
also in ice_get_pgcnts().
Instead of iterating over just the number of fragments, use a loop which
iterates until the current index reaches to the next_to_clean element just
past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does
call ice_put_rx_buf() on the last buffer of the frame indicating the end of
packet.
For non-linear (multi-buffer) frames, we need to take care when adjusting
the pagecnt_bias. An XDP program might release fragments from the tail of
the frame, in which case that fragment page is already released. Only
update the pagecnt_bias for the first descriptor and fragments still
remaining post-XDP program. Take care to only access the shared info for
fragmented buffers, as this avoids a significant cache miss.
The xdp_xmit value only needs to be updated if an XDP program is run, and
only once per packet. Drop the xdp_xmit pointer argument from
ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function
directly. This avoids needing to pass the argument and avoids an extra
bit-wise OR for each buffer in the frame.
Move the increment of the ntc local variable to ensure its updated *before*
all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic
requires the index of the element just after the current frame.
Now that we use an index pointer in the ring to identify the packet, we no
longer need to track or cache the number of fragments in the rx_ring.
Cc: Christoph Petrausch <christoph.petrausch@deepl.com> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Closes: https://lore.kernel.org/netdev/CAK8fFZ4hY6GUJNENz3wY9jaYLZXGfpr7dnZxzGMYoE44caRbgw@mail.gmail.com/ Fixes: 743bbd93cf29 ("ice: put Rx buffers after being done with current frame") Tested-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Tested-by: Priya Singh <priyax.singh@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The max_frame and rx_buf_len fields of the VSI set the maximum frame size
for packets on the wire, and configure the size of the Rx buffer. In the
hardware, these are per-queue configuration. Most VSI types use a simple
method to determine the size of the buffers for all queues.
However, VFs may potentially configure different values for each queue.
While the Linux iAVF driver does not do this, it is allowed by the virtchnl
interface.
The current virtchnl code simply sets the per-VSI fields inbetween calls to
ice_vsi_cfg_single_rxq(). This technically works, as these fields are only
ever used when programming the Rx ring, and otherwise not checked again.
However, it is confusing to maintain.
The Rx ring also already has an rx_buf_len field in order to access the
buffer length in the hotpath. It also has extra unused bytes in the ring
structure which we can make use of to store the maximum frame size.
Drop the VSI max_frame and rx_buf_len fields. Add max_frame to the Rx ring,
and slightly re-order rx_buf_len to better fit into the gaps in the
structure layout.
Change the ice_vsi_cfg_frame_size function so that it writes to the ring
fields. Call this function once per ring in ice_vsi_cfg_rxqs(). This is
done over calling it inside the ice_vsi_cfg_rxq(), because
ice_vsi_cfg_rxq() is called in the virtchnl flow where the max_frame and
rx_buf_len have already been configured.
Change the accesses for rx_buf_len and max_frame to all point to the ring
structure. This has the added benefit that ice_vsi_cfg_rxq() no longer has
the surprise side effect of updating ring->rx_buf_len based on the VSI
field.
Update the virtchnl ice_vc_cfg_qs_msg() function to set the ring values
directly, and drop references to the removed VSI fields.
This now makes the VF logic clear, as the ring fields are obviously
per-queue. This reduces the required cognitive load when reasoning about
this logic.
Note that removing the VSI fields does leave a 4 byte gap, but the ice_vsi
structure has many gaps, and its layout is not as critical in the hot path.
The structure may benefit from a more thorough repacking, but no attempt
was made in this change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 84bf1ac85af8 ("ice: fix Rx page leak on multi-buffer frames") Signed-off-by: Sasha Levin <sashal@kernel.org>
`netif_rx()` already increments `rx_dropped` core stat when it fails.
The driver was also updating `ndev->stats.rx_dropped` in the same path.
Since both are reported together via `ip -s -s` command, this resulted
in drops being counted twice in user-visible stats.
Keep the driver update on `if (unlikely(!skb))`, but skip it after
`netif_rx()` errors.
Fixes: caf586e5f23c ("net: add a core netdev->rx_dropped counter") Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250913060135.35282-3-yyyynoom@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes several issues in the error reporting of the MPTCP sockopt
selftest:
1. Fix diff not printed: The error messages for counter mismatches had
the actual difference ('diff') as argument, but it was missing in the
format string. Displaying it makes the debugging easier.
2. Fix variable usage: The error check for 'mptcpi_bytes_acked' incorrectly
used 'ret2' (sent bytes) for both the expected value and the difference
calculation. It now correctly uses 'ret' (received bytes), which is the
expected value for bytes_acked.
3. Fix off-by-one in diff: The calculation for the 'mptcpi_rcv_delta' diff
was 's.mptcpi_rcv_delta - ret', which is off-by-one. It has been
corrected to 's.mptcpi_rcv_delta - (ret + 1)' to match the expected
value in the condition above it.
The previous commit adds the MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 flag. Make
sure it is correctly announced by the other peer when it has been
received.
pm_nl_ctl will now display 'deny_join_id0:1' when monitoring the events,
and when this flag was set by the other peer.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
When a SYN containing the 'C' flag (deny join id0) was received, this
piece of information was not propagated to the path-manager.
Even if this flag is mainly set on the server side, a client can also
tell the server it cannot try to establish new subflows to the client's
initial IP address and port. The server's PM should then record such
info when received, and before sending events about the new connection.
After commit 5c3bf6cba791 ("bonding: assign random address if device
address is same as bond"), bonding will erroneously randomize the MAC
address of the first interface added to the bond if fail_over_mac =
follow.
Correct this by additionally testing for the bond being empty before
randomizing the MAC.
Fixes: 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") Reported-by: Qiuling Ren <qren@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20250910024336.400253-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the protection override dump path, the firmware can return far too
many GRC elements, resulting in attempting to write past the end of the
previously-kmalloc'ed dump buffer.
This will result in a kernel panic with reason:
BUG: unable to handle kernel paging request at ADDRESS
where "ADDRESS" is just past the end of the protection override dump
buffer. The start address of the buffer is:
p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf
and the size of the buffer is buf_size in the same data structure.
The panic can be arrived at from either the qede Ethernet driver path:
A NULL pointer dereference can occur in tcp_ao_finish_connect() during a
connect() system call on a socket with a TCP-AO key added and TCP_REPAIR
enabled.
The function is called with skb being NULL and attempts to dereference it
on tcp_hdr(skb)->seq without a prior skb validation.
Fix this by checking if skb is NULL before dereferencing it.
The commentary is taken from bpf_skops_established(), which is also called
in the same flow. Unlike the function being patched,
bpf_skops_established() validates the skb before dereferencing it.
int main(void){
struct sockaddr_in sockaddr;
struct tcp_ao_add tcp_ao;
int sk;
int one = 1;
Starting with commit c50e7475961c ("dpaa2-switch: Fix error checking in
dpaa2_switch_seed_bp()"), the probing of a second DPSW object errors out
like below.
fsl_dpaa2_switch dpsw.1: fsl_mc_driver_probe failed: -12
fsl_dpaa2_switch dpsw.1: probe with driver fsl_dpaa2_switch failed with error -12
The aforementioned commit brought to the surface the fact that seeding
buffers into the buffer pool destined for control traffic is not
successful and an access violation recoverable error can be seen in the
MC firmware log:
This happens because the driver incorrectly used the ID of the DPBP
object instead of the hardware buffer pool ID when trying to release
buffers into it.
This is because any DPSW object uses two buffer pools, one managed by
the Linux driver and destined for control traffic packet buffers and the
other one managed by the MC firmware and destined only for offloaded
traffic. And since the buffer pool managed by the MC firmware does not
have an external facing DPBP equivalent, any subsequent DPBP objects
created after the first DPSW will have a DPBP id different to the
underlying hardware buffer ID.
The issue was not caught earlier because these two numbers can be
identical when all DPBP objects are created before the DPSW objects are.
This is the case when the DPL file is used to describe the entire DPAA2
object layout and objects are created at boot time and it's also true
for the first DPSW being created dynamically using ls-addsw.
Fix this by using the buffer pool ID instead of the DPBP id when
releasing buffers into the pool.
Fixes: 2877e4f7e189 ("staging: dpaa2-switch: setup buffer pool and RX path rings") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://patch.msgid.link/20250910144825.2416019-1-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When register_virtio_device() fails in virtio_uml_probe(),
the code sets vu_dev->registered = 1 even though
the device was not successfully registered.
This can lead to use-after-free or other issues.
Fixes: 04e5b1fb0183 ("um: virtio: Remove device on disconnect") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The offset for an extref item's key is not the object ID of the parent
dir, otherwise we would not need the extref item and would use plain ref
items. Instead the offset is the result of a hash computation that uses
the object ID of the parent dir and the name associated to the entry.
So fix this by setting the key offset at replay_one_name() to be the
result of calling btrfs_extref_hash().
Fixes: 725af92a6251 ("btrfs: Open-code name_in_log_ref in replay_one_name") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A hung task can occur during [1] LTP cgroup testing when repeatedly
mounting/unmounting perf_event and net_prio controllers with
systemd.unified_cgroup_hierarchy=1. The hang manifests in
cgroup_lock_and_drain_offline() during root destruction.
Related case:
cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event
cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio
CPU0 CPU1
mount perf_event umount net_prio
cgroup1_get_tree cgroup_kill_sb
rebind_subsystems // root destruction enqueues
// cgroup_destroy_wq
// kill all perf_event css
// one perf_event css A is dying
// css A offline enqueues cgroup_destroy_wq
// root destruction will be executed first
css_free_rwork_fn
cgroup_destroy_root
cgroup_lock_and_drain_offline
// some perf descendants are dying
// cgroup_destroy_wq max_active = 1
// waiting for css A to die
Problem scenario:
1. CPU0 mounts perf_event (rebind_subsystems)
2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work
3. A dying perf_event CSS gets queued for offline after root destruction
4. Root destruction waits for offline completion, but offline work is
blocked behind root destruction in cgroup_destroy_wq (max_active=1)
Solution:
Split cgroup_destroy_wq into three dedicated workqueues:
cgroup_offline_wq – Handles CSS offline operations
cgroup_release_wq – Manages resource release
cgroup_free_wq – Performs final memory deallocation
This separation eliminates blocking in the CSS free path while waiting for
offline operations to complete.
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via platform_driver_probe(). Make this explicit
to prevent the following section mismatch warning
The variable ret is declared as a u32 type, but it is assigned a value
of -EOPNOTSUPP. Since unsigned types cannot correctly represent negative
values, the type of ret should be changed to int.
Currently the S1G capability element is not taken into account
for the scan_ies_len, which leads to a buffer length validation
failure in ieee80211_prep_hw_scan() and subsequent WARN in
__ieee80211_start_scan(). This prevents hw scanning from functioning.
To fix ensure we accommodate for the S1G capability length.
The ALSA HwDep character device of the firewire-motu driver incorrectly
returns EPOLLOUT in poll(2), even though the driver implements no operation
for write(2). This misleads userspace applications to believe write() is
allowed, potentially resulting in unnecessarily wakeups.
This issue dates back to the driver's initial code added by a commit 71c3797779d3 ("ALSA: firewire-motu: add hwdep interface"), and persisted
when POLLOUT was updated to EPOLLOUT by a commit a9a08845e9ac ('vfs: do
bulk POLL* -> EPOLL* replacement("").').
I recently ran into an issue where the PI generated using the block layer
integrity code differs from that from a kernel using the PRACT fallback
when the block layer integrity code is disabled, and I tracked this down
to us using PRACT incorrectly.
The NVM Command Set Specification (section 5.33 in 1.2, similar in older
versions) specifies the PRACT insert behavior as:
Inserted protection information consists of the computed CRC for the
protection information format (refer to section 5.3.1) in the Guard
field, the LBAT field value in the Application Tag field, the LBST
field value in the Storage Tag field, if defined, and the computed
reference tag in the Logical Block Reference Tag.
Where the computed reference tag is defined as following for type 1 and
type 2 using the text below that is duplicated in the respective bullet
points:
the value of the computed reference tag for the first logical block of
the command is the value contained in the Initial Logical Block
Reference Tag (ILBRT) or Expected Initial Logical Block Reference Tag
(EILBRT) field in the command, and the computed reference tag is
incremented for each subsequent logical block.
So we need to set ILBRT field, but we currently don't. Interestingly
this works fine on my older type 1 formatted SSD, but Qemu trips up on
this. We already set ILBRT for Write Same since commit aeb7bb061be5
("nvme: set the PRACT bit when using Write Zeroes with T10 PI").
To ease this, move the PI type check into nvme_set_ref_tag.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the following copy overflow warning identified by Smatch checker.
drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame()
error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537)
This patch introduces size check before accessing the memory buffer.
The checks are base on the WID type of received data from the firmware.
For WID string configuration, the size limit is determined by individual
element size in 'struct wilc_cfg_str_vals' that is maintained in 'len' field
of 'struct wilc_cfg_str'.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/aLFbr9Yu9j_TQTey@stanley.mountain Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Link: https://patch.msgid.link/20250829225829.5423-1-ajay.kathat@microchip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
x86_64-linux-ld: kernel image bigger than KERNEL_IMAGE_SIZE
Bisect points to commit 6f110a5e4f99 ("Disable SLUB_TINY for build
testing") as the responsible commit. Reverting that patch does indeed fix
the problem. Further analysis shows that disabling SLUB_TINY enables
KASAN, and that KASAN is responsible for the image size increase.
Solve the build problem by disabling the image size check for test
builds.
Commit b61badd20b44 ("drm/amdgpu: fix usage slab after free")
reordered when amdgpu_fence_driver_sw_fini() was called after
that patch, amdgpu_fence_driver_sw_fini() effectively became
a no-op as the sched entities we never freed because the
ring pointers were already set to NULL. Remove the NULL
setting.
Reported-by: Lin.Cao <lincao12@amd.com> Cc: Vitaly Prosyak <vitaly.prosyak@amd.com> Cc: Christian König <christian.koenig@amd.com> Fixes: b61badd20b44 ("drm/amdgpu: fix usage slab after free") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a525fa37aac36c4591cc8b07ae8957862415fbd5) Cc: stable@vger.kernel.org
[ Adapt to conditional check ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
for_each_set_bit() expects size to be in bits, not bytes. The abox mask
iteration uses bytes, but it works by coincidence, because the local
variable holding the mask is unsigned long, and the mask only ever has
bit 2 as the highest bit. Using a smaller type could lead to subtle and
very hard to track bugs.
Fixes: 62afef2811e4 ("drm/i915/rkl: RKL uses ABOX0 for pixel transfers") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org # v5.9+ Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://lore.kernel.org/r/20250905104149.1144751-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 7ea3baa6efe4bb93d11e1c0e6528b1468d7debf6) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
[ adapted struct intel_display *display parameters to struct drm_i915_private *dev_priv ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
reset_gpio is claimed in mdiobus_register_device(), but it is not
released in mdiobus_unregister_device(). It is instead only
released when the whole MDIO bus is unregistered.
When a device uses the reset_gpio property, it becomes impossible
to unregister it and register it again, because the GPIO remains
claimed.
This patch resolves that issue.
Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") # see notes Reviewed-by: Andrew Lunn <andrew@lunn.ch> Cc: Csókás Bence <csokas.bence@prolan.hu>
[ csokas.bence: Resolve rebase conflict and clarify msg ] Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ csokas.bence: Use the v1 patch on top of 6.12, as specified in notes ] Signed-off-by: Bence Csókás <csokas.bence@prolan.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support for parsing the topology on AMD/Hygon processors using CPUID leaf 0xb
was added in
3986a0a805e6 ("x86/CPU/AMD: Derive CPU topology from CPUID function 0xB when available").
In an effort to keep all the topology parsing bits in one place, this commit
also introduced a pseudo dependency on the TOPOEXT feature to parse the CPUID
leaf 0xb.
The TOPOEXT feature (CPUID 0x80000001 ECX[22]) advertises the support for
Cache Properties leaf 0x8000001d and the CPUID leaf 0x8000001e EAX for
"Extended APIC ID" however support for 0xb was introduced alongside the x2APIC
support not only on AMD [1], but also historically on x86 [2].
Similar to 0xb, the support for extended CPU topology leaf 0x80000026 too does
not depend on the TOPOEXT feature.
The support for these leaves is expected to be confirmed by ensuring
leaf <= {extended_}cpuid_level
and then parsing the level 0 of the respective leaf to confirm EBX[15:0]
(LogProcAtThisLevel) is non-zero as stated in the definition of
"CPUID_Fn0000000B_EAX_x00 [Extended Topology Enumeration]
(Core::X86::Cpuid::ExtTopEnumEax0)" in Processor Programming Reference (PPR)
for AMD Family 19h Model 01h Rev B1 Vol1 [3] Sec. 2.1.15.1 "CPUID Instruction
Functions".
This has not been a problem on baremetal platforms since support for TOPOEXT
(Fam 0x15 and later) predates the support for CPUID leaf 0xb (Fam 0x17[Zen2]
and later), however, for AMD guests on QEMU, the "x2apic" feature can be
enabled independent of the "topoext" feature where QEMU expects topology and
the initial APICID to be parsed using the CPUID leaf 0xb (especially when
number of cores > 255) which is populated independent of the "topoext" feature
flag.
Unconditionally call cpu_parse_topology_ext() on AMD and Hygon processors to
first parse the topology using the XTOPOLOGY leaves (0x80000026 / 0xb) before
using the TOPOEXT leaf (0x8000001e).
While at it, break down the single large comment in parse_topology_amd() to
better highlight the purpose of each CPUID leaf.
Make sure to drop the references taken to the PMC OF node and device by
of_parse_phandle() and of_find_device_by_node() during probe.
Note the holding a reference to the PMC device does not prevent the
PMC regmap from going away (e.g. if the PMC driver is unbound) so there
is no need to keep the reference.
Fixes: 2d1021487273 ("phy: tegra: xusb: Add wake/sleepwalk for Tegra210") Cc: stable@vger.kernel.org # 5.14 Cc: JC Kuo <jckuo@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250724131206.2211-2-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we don't have a clock specified in the device tree, we have no way to
ensure the BAM is on. This is often the case for remotely-controlled or
remotely-powered BAM instances. In this case, we need to read num-channels
from the DT to have all the necessary information to complete probing.
However, at the moment invalid device trees without clock and without
num-channels still continue probing, because the error handling is missing
return statements. The driver will then later try to read the number of
channels from the registers. This is unsafe, because it relies on boot
firmware and lucky timing to succeed. Unfortunately, the lack of proper
error handling here has been abused for several Qualcomm SoCs upstream,
causing early boot crashes in several situations [1, 2].
Avoid these early crashes by erroring out when any of the required DT
properties are missing. Note that this will break some of the existing DTs
upstream (mainly BAM instances related to the crypto engine). However,
clearly these DTs have never been tested properly, since the error in the
kernel log was just ignored. It's safer to disable the crypto engine for
these broken DTBs.
The EP-IN of MIDI2 (altset 1) wasn't initialized in
f_midi2_create_usb_configs() as it's an INT EP unlike others BULK
EPs. But this leaves rather the max packet size unchanged no matter
which speed is used, resulting in the very slow access.
And the wMaxPacketSize values set there look legit for INT EPs, so
let's initialize the MIDI2 EP-IN there for achieving the equivalent
speed as well.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver") Cc: stable <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20250905133240.20966-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gadget card driver forgot to call snd_ump_update_group_attrs()
after adding FBs, and this leaves the UMP group attributes
uninitialized. As a result, -ENODEV error is returned at opening a
legacy rawmidi device as an inactive group.
This patch adds the missing call to address the behavior above.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver") Cc: stable <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20250904153932.13589-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcpm_handle_vdm_request delivers messages to the partner altmode or the
cable altmode depending on the SVDM response type, which is incorrect.
The partner or cable should be chosen based on the received message type
instead.
Also add this filter to ADEV_NOTIFY_USB_AND_QUEUE_VDM, which is used when
the Enter Mode command is responded to by a NAK on SOP or SOP' and when
the Exit Mode command is responded to by an ACK on SOP.
Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250821203759.1720841-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yunseong Kim and the syzbot fuzzer both reported a problem in
RT-enabled kernels caused by the way dummy-hcd mixes interrupt
management and spin-locking. The pattern was:
The code was written this way because usb_gadget_giveback_request()
needs to be called with interrupts disabled and the private lock not
held.
While this pattern works fine in non-RT kernels, it's not good when RT
is enabled. RT kernels handle spinlocks much like mutexes; in particular,
spin_lock() may sleep. But sleeping is not allowed while local
interrupts are disabled.
To fix the problem, rewrite the code to conform to the pattern used
elsewhere in dummy-hcd and other UDC drivers:
Suspend-resume cycle test revealed a memory leak in 6.17-rc3
Turns out the slot_id race fix changes accidentally ends up calling
xhci_free_virt_device() with an incorrect vdev parameter.
The vdev variable was reused for temporary purposes right before calling
xhci_free_virt_device().
Fix this by passing the correct vdev parameter.
The slot_id race fix that caused this regression was targeted for stable,
so this needs to be applied there as well.
Fixes: 2eb03376151b ("usb: xhci: Fix slot_id resource race conflict") Reported-by: David Wang <00107082@163.com> Closes: https://lore.kernel.org/linux-usb/20250829181354.4450-1-00107082@163.com Suggested-by: Michal Pecio <michal.pecio@gmail.com> Suggested-by: David Wang <00107082@163.com> Cc: stable@vger.kernel.org Tested-by: David Wang <00107082@163.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250902105306.877476-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In file included from ./include/linux/sched/task_stack.h:12,
from ./arch/riscv/include/asm/compat.h:12,
from ./arch/riscv/include/asm/pgtable.h:115,
from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:30,
from arch/riscv/kernel/asm-offsets.c:8:
./include/linux/kasan.h:50:37: error: ‘MAX_PTRS_PER_PTE’ undeclared here (not in a function); did you mean ‘PTRS_PER_PTE’?
50 | extern pte_t kasan_early_shadow_pte[MAX_PTRS_PER_PTE + PTE_HWTABLE_PTRS];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PTE
./include/linux/kasan.h:51:8: error: unknown type name ‘pmd_t’; did you mean ‘pgd_t’?
51 | extern pmd_t kasan_early_shadow_pmd[MAX_PTRS_PER_PMD];
| ^~~~~
| pgd_t
./include/linux/kasan.h:51:37: error: ‘MAX_PTRS_PER_PMD’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
51 | extern pmd_t kasan_early_shadow_pmd[MAX_PTRS_PER_PMD];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
./include/linux/kasan.h:52:8: error: unknown type name ‘pud_t’; did you mean ‘pgd_t’?
52 | extern pud_t kasan_early_shadow_pud[MAX_PTRS_PER_PUD];
| ^~~~~
| pgd_t
./include/linux/kasan.h:52:37: error: ‘MAX_PTRS_PER_PUD’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
52 | extern pud_t kasan_early_shadow_pud[MAX_PTRS_PER_PUD];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
./include/linux/kasan.h:53:8: error: unknown type name ‘p4d_t’; did you mean ‘pgd_t’?
53 | extern p4d_t kasan_early_shadow_p4d[MAX_PTRS_PER_P4D];
| ^~~~~
| pgd_t
./include/linux/kasan.h:53:37: error: ‘MAX_PTRS_PER_P4D’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
53 | extern p4d_t kasan_early_shadow_p4d[MAX_PTRS_PER_P4D];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
Attach the power good gpio to the regulator device devres instead of the
parent device to fix problems if probe is run multiple times
(rmmod/insmod or some deferral).
Fixes: 8c485bedfb785 ("regulator: sy7636a: Initial commit") Signed-off-by: Andreas Kemnade <akemnade@kernel.org> Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20250906-sy7636-rsrc-v1-2-e2886a9763a7@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a critical memory allocation bug in edma_setup_from_hw() where
queue_priority_map was allocated with insufficient memory. The code
declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8),
but allocated memory using sizeof(s8) instead of the correct size.
This caused out-of-bounds memory writes when accessing:
queue_priority_map[i][0] = i;
queue_priority_map[i][1] = i;
The bug manifested as kernel crashes with "Oops - undefined instruction"
on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the
memory corruption triggered kernel hardening features on Clang.
Change the allocation to use sizeof(*queue_priority_map) which
automatically gets the correct size for the 2D array structure.
Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20250830094953.3038012-1-anders.roxell@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The clean up in idxd_setup_wqs() has had a couple bugs because the error
handling is a bit subtle. It's simpler to just re-write it in a cleaner
way. The issues here are:
1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when
"conf_dev" hasn't been initialized.
2) If kzalloc_node() fails then again "conf_dev" is invalid. It's
either uninitialized or it points to the "conf_dev" from the
previous iteration so it leads to a double free.
It's better to free partial loop iterations within the loop and then
the unwinding at the end can handle whole loop iterations. I also
renamed the labels to describe what the goto does and not where the goto
was located.
Fixes: 3fd2f4bc010c ("dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs") Reported-by: Colin Ian King <colin.i.king@gmail.com> Closes: https://lore.kernel.org/all/20250811095836.1642093-1-colin.i.king@gmail.com/ Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/aJnJW3iYTDDCj9sk@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A recent refactor introduced a misplaced put_device() call, resulting in a
reference count underflow during module unload.
There is no need to add additional put_device() calls for idxd groups,
engines, or workqueues. Although the commit claims: "Note, this also
fixes the missing put_device() for idxd groups, engines, and wqs."
It appears no such omission actually existed. The required cleanup is
already handled by the call chain:
idxd_unregister_devices() -> device_unregister() -> put_device()
Extend idxd_cleanup() to handle the remaining necessary cleanup and
remove idxd_cleanup_internals(), which duplicates deallocation logic
for idxd, engines, groups, and workqueues. Memory management is also
properly handled through the Linux device model.
Fixes: a409e919ca32 ("dmaengine: idxd: Refactor remove call with idxd_cleanup() helper") Signed-off-by: Yi Sun <yi.sun@intel.com> Tested-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20250729150313.1934101-3-yi.sun@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The call to idxd_free() introduces a duplicate put_device() leading to a
reference count underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
Call Trace:
<TASK>
idxd_remove+0xe4/0x120 [idxd]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x197/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
idxd_exit_module+0x34/0x7a0 [idxd]
__do_sys_delete_module.constprop.0+0x183/0x280
do_syscall_64+0x54/0xd70
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The idxd_unregister_devices() which is invoked at the very beginning of
idxd_remove(), already takes care of the necessary put_device() through the
following call path:
idxd_unregister_devices() -> device_unregister() -> put_device()
In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may
trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is
called immediately after, it can result in a use-after-free.
Remove the improper idxd_free() to avoid both the refcount underflow and
potential memory corruption during module unload.
Fixes: d5449ff1b04d ("dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call") Signed-off-by: Yi Sun <yi.sun@intel.com> Tested-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20250729150313.1934101-2-yi.sun@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
hsr_port_get_hsr() iterates over ports using hsr_for_each_port(),
but many of its callers do not hold the required RCU lock.
Switch to hsr_for_each_port_rtnl(), since most callers already hold
the rtnl lock. After review, all callers are covered by either the rtnl
lock or the RCU lock, except hsr_dev_xmit(). Fix this by adding an
RCU read lock there.
Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250905091533.377443-3-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
hsr_for_each_port is called in many places without holding the RCU read
lock, this may trigger warnings on debug kernels. Most of the callers
are actually hold rtnl lock. So add a new helper hsr_for_each_port_rtnl
to allow callers in suitable contexts to iterate ports safely without
explicit RCU locking.
This patch only fixed the callers that is hold rtnl lock. Other caller
issues will be fixed in later patches.
Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250905091533.377443-2-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
