dss_of_port_get_parent_device() leaks an OF node reference when i >= 2
and struct device_node *np is present. Since of_get_next_parent()
obtains a reference of the returned OF node, call of_node_put() before
returning NULL.
This was found by an experimental verifier that I am developing, and no
runtime test was able to be performed due to that lack of actual
devices.
Fix following validation error:
arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: cir@10013000: $nodename:0: 'cir@10013000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
Fixes: 91044f38dae7 ("arm: dts: mt7623: add ir nodes to the mt7623.dtsi file") Cc: linux-media@vger.kernel.org Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20240617094634.23173-1-zajec5@gmail.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SM8250 platform uses PM8150 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
Fixes: 9ff8b0591fcf ("arm64: dts: qcom: sm8250: use the right clock-freqency for sleep-clk") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241224-fix-board-clocks-v3-13-e9b08fbeadd3@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MSM8994 platform uses PM8994/6 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
The MSM8916 platform uses PM8916 to provide sleep clock. According to the
documentation, that clock has 32.7645 kHz frequency. Correct the sleep
clock definition.
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It is also not listed in the MT6397
regulator bindings. Having them present produces a whole bunch of
validation errors:
Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 689b937bedde ("arm64: dts: mediatek: add mt8173 elm and hana board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241211052427.4178367-4-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "regulator-compatible" property has been deprecated since 2012 in
commit 13511def87b9 ("regulator: deprecate regulator-compatible DT
property"), which is so old it's not even mentioned in the converted
regulator bindings YAML file. It is also not listed in the MT6397
regulator bindings. Having them present produces a whole bunch of
validation errors:
Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Drop the "regulator-compatible" property from the board dts. The
property values are the same as the node name, so everything should
continue to work.
Fixes: 16ea61fc5614 ("arm64: dts: mt8173-evb: Add PMIC support") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241211052427.4178367-3-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len + sizeof(struct
cpl_pass_accept_req) + sizeof(struct rss_header)" addition could have an
integer wrapping bug. Use size_add() to prevent this.
Fixes: 1cab775c3e75 ("RDMA/cxgb4: Fix LE hash collision bug for passive open connection") Link: https://patch.msgid.link/r/86b404e1-4a75-4a35-a34e-e3054fa554c7@stanley.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch generates the following false error report:
drivers/infiniband/hw/mlx4/main.c:393 mlx4_ib_del_gid() error: uninitialized symbol 'gids'.
Traditionally, we are not changing kernel code and asking people to fix
the tools. However in this case, the fix can be done by simply rearranging
the code to be more clear.
The Android DTB for the related MT8167 reserves 0x30000. This is likely
correct for MT8516 Android devices as well, and there's never any harm
in reserving 64KiB more.
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516") Signed-off-by: Val Packett <val@packett.cool> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241204190524.21862-5-val@packett.cool Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the clock-div property from the pumpkin board dtsi to the SoC's
since it belongs to the SoC itself and is required on other devices.
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516") Signed-off-by: Val Packett <val@packett.cool> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241204190524.21862-4-val@packett.cool Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The two clocks "main-source" and "main-sel" are not present in the
driver and not defined in the binding documentation. Remove them
as they are not used and not described in the documentation.
The GICv2 does not support EDGE_FALLING interrupts, so the watchdog
would refuse to attach due to a failing check coming from the GIC driver.
Fixes: 5236347bde42 ("arm64: dts: mediatek: add dtsi for MT8516") Signed-off-by: Val Packett <val@packett.cool> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20241204190524.21862-3-val@packett.cool Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Although the previous patch can avoid ps and ps UAF for _do_serial, it
can not avoid potential UAF issue for reorder_work. This issue can
happen just as below:
crypto_request crypto_request crypto_del_alg
padata_do_serial
...
padata_reorder
// processes all remaining
// requests then breaks
while (1) {
if (!padata)
break;
...
}
padata_do_serial
// new request added
list_add
// sees the new request
queue_work(reorder_work)
padata_reorder
queue_work_on(squeue->work)
...
<kworker context>
padata_serial_worker
// completes new request,
// no more outstanding
// requests
crypto_del_alg
// free pd
<kworker context>
invoke_padata_reorder
// UAF of pd
To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work'
into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish.
Fixes: bbefa1dd6a6d ("crypto: pcrypt - Avoid deadlock by using per-instance padata queues") Signed-off-by: Chen Ridong <chenridong@huawei.com> Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ Fixes: b128a3040935 ("padata: allocate workqueue internally") Signed-off-by: Chen Ridong <chenridong@huawei.com> Signed-off-by: Qu Zicheng <quzicheng@huawei.com> Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
BPF programs can execute in all kinds of contexts and when a program
running in a non-preemptible context uses the bpf_send_signal() kfunc,
it will cause issues because this kfunc can sleep.
Change `irqs_disabled()` to `!preemptible()`.
Recently we got a case where a kernel sample wasn't being resolved due
to a bug that was not setting the end address on kernel functions
implemented in assembly (see Link: tag), and then those were not being
found by machine__resolve() -> map__find_symbol().
padata_sysfs_store() was copied from padata_sysfs_show() but this check
was not adapted. Today there is no attribute which can fail this
check, but if there is one it may as well be correct.
Fixes: 5e017dc3f8bc ("padata: Added sysfs primitives to padata subsystem") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
If perf_env__insert_bpf_prog_info() returns false due to a duplicate bpf
prog info node insertion, the temporary info_node and info_linear memory
will leak. Add a check to ensure the memory is freed if the function
returns false.
Fixes: d56354dc49091e33 ("perf tools: Save bpf_prog_info and BTF of new BPF programs") Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20241205084500.823660-4-quic_zhonhan@quicinc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If libbpf isn't selected, no need for a bunch of related code, that were
not even being used, as code using these perf_env methods was also
enclosed in HAVE_LIBBPF_SUPPORT.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 03edb7020bb9 ("perf bpf: Fix two memory leakages when calling perf_env__insert_bpf_prog_info()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Function __perf_env__insert_bpf_prog_info() will return without inserting
bpf prog info node into perf env again due to a duplicate bpf prog info
node insertion, causing the temporary info_linear and info_node memory to
leak. Modify the return type of this function to bool and add a check to
ensure the memory is freed if the function returns false.
Fixes: 606f972b1361f477 ("perf bpf: Save bpf_prog_info information as headers to perf.data") Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20241205084500.823660-3-quic_zhonhan@quicinc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If __perf_env__insert_btf() returns false due to a duplicate btf node
insertion, the temporary node will leak. Add a check to ensure the memory
is freed if the function returns false.
Fixes: a70a1123174ab592 ("perf bpf: Save BTF information as headers to perf.data") Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20241205084500.823660-2-quic_zhonhan@quicinc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There have been intermittent issues with the SPDIF output on H3
and H2+ devices which has been fixed by setting the s_clk to 4
times the audio pll.
Add a quirk for the clock multiplier as not every supported SoC
requires it. Without the multiplier, the audio at normal sampling
rates was distorted and did not play at higher sampling rates.
Fixes: 1bd92af877ab ("ASoC: sun4i-spdif: Add support for the H3 SoC") Signed-off-by: George Lander <lander@jagmn.com> Signed-off-by: Marcus Cooper <codekipper@gmail.com> Link: https://patch.msgid.link/20241111165600.57219-2-codekipper@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit f803bcf9208a ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf9208a ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh") Signed-off-by: Marco Leogrande <leogrande@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of possible unpredictably large arguments passed to
rose_setsockopt() and multiplied by extra values on top of that,
integer overflows may occur.
Do the safest minimum and fix these issues by checking the
contents of 'opt' and returning -EINVAL if they are too large. Also,
switch to unsigned int and remove useless check for negative 'opt'
in ROSE_IDLE case.
When getting the IRQ we use k3_udma_glue_tx_get_irq() which returns
negative error value on error. So not NULL check is not sufficient
to deteremine if IRQ is valid. Check that IRQ is greater then zero
to ensure it is valid.
There is no issue at probe time but at runtime user can invoke
.set_channels which results in the following call chain.
am65_cpsw_set_channels()
am65_cpsw_nuss_update_tx_rx_chns()
am65_cpsw_nuss_remove_tx_chns()
am65_cpsw_nuss_init_tx_chns()
At this point if am65_cpsw_nuss_init_tx_chns() fails due to
k3_udma_glue_tx_get_irq() then tx_chn->irq will be set to a
negative value.
Then, at subsequent .set_channels with higher channel count we
will attempt to free an invalid IRQ in am65_cpsw_nuss_remove_tx_chns()
leading to a kernel warning.
The issue is present in the original commit that introduced this driver,
although there, am65_cpsw_nuss_update_tx_rx_chns() existed as
am65_cpsw_nuss_update_tx_chns().
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Lion Ackermann was able to create a UAF which can be abused for privilege
escalation with the following script
Step 1. create root qdisc
tc qdisc add dev lo root handle 1:0 drr
step2. a class for packet aggregation do demonstrate uaf
tc class add dev lo classid 1:1 drr
step3. a class for nesting
tc class add dev lo classid 1:2 drr
step4. a class to graft qdisc to
tc class add dev lo classid 1:3 drr
step5.
tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024
step6.
tc qdisc add dev lo parent 1:2 handle 3:0 drr
step7.
tc class add dev lo classid 3:1 drr
step 8.
tc qdisc add dev lo parent 3:1 handle 4:0 pfifo
step 9. Display the class/qdisc layout
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 limit 1000p
qdisc drr 3: dev lo parent 1:2
step10. trigger the bug <=== prevented by this patch
tc qdisc replace dev lo parent 1:3 handle 4:0
step 11. Redisplay again the qdiscs/classes
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 1:3 root leaf 4: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p
qdisc drr 3: dev lo parent 1:2
Observe that a) parent for 4:0 does not change despite the replace request.
There can only be one parent. b) refcount has gone up by two for 4:0 and
c) both class 1:3 and 3:1 are pointing to it.
Step 12. send one packet to plug
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001))
step13. send one packet to the grafted fifo
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003))
step14. lets trigger the uaf
tc class delete dev lo classid 1:3
tc class delete dev lo classid 1:1
The semantics of "replace" is for a del/add _on the same node_ and not
a delete from one node(3:1) and add to another node (1:3) as in step10.
While we could "fix" with a more complex approach there could be
consequences to expectations so the patch takes the preventive approach of
"disallow such config".
Joint work with Lion Ackermann <nnamrec@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250116013713.900000-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, mlxfw kernel module limits FW flash image size to be
10MB at most, preventing the ability to burn recent BlueField-3
FW that exceeds the said size limit.
Thus, drop the hard coded limit. Instead, rely on FW's
max_component_size threshold that is reported in MCQI register
as the size limit for FW image.
The following problem was encountered during stability test:
(NULL net_device): NAPI poll function process_backlog+0x0/0x530 \
returned 1, exceeding its budget of 0.
------------[ cut here ]------------
list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \
next=ffff88905f746e40.
WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \
__list_add_valid_or_report+0xf3/0x130
CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+
RIP: 0010:__list_add_valid_or_report+0xf3/0x130
Call Trace:
? __warn+0xcd/0x250
? __list_add_valid_or_report+0xf3/0x130
enqueue_to_backlog+0x923/0x1070
netif_rx_internal+0x92/0x2b0
__netif_rx+0x15/0x170
loopback_xmit+0x2ef/0x450
dev_hard_start_xmit+0x103/0x490
__dev_queue_xmit+0xeac/0x1950
ip_finish_output2+0x6cc/0x1620
ip_output+0x161/0x270
ip_push_pending_frames+0x155/0x1a0
raw_sendmsg+0xe13/0x1550
__sys_sendto+0x3bf/0x4e0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x5b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reproduction command is as follows:
sysctl -w net.core.dev_weight=0
ping 127.0.0.1
This is because when the napi's weight is set to 0, process_backlog() may
return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this
napi to be re-polled in net_rx_action() until __do_softirq() times out.
Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can
be retriggered in enqueue_to_backlog(), causing this issue.
Making the napi's weight always non-zero solves this problem.
Triggering this issue requires system-wide admin (setting is
not namespaced).
In wrpll_configure_for_rate() we try to determine the best PLL
configuration for a target rate. However, in the loop where we try
values of R, we should compare the derived `vco` with `target_vco_rate`.
However, we were in fact comparing it with `target_rate`, which is
actually after Q shift. This is incorrect, and sometimes can result in
suboptimal clock rates. Fix it.
Fixes: 7b9487a9a5c4 ("clk: analogbits: add Wide-Range PLL library") Signed-off-by: Bo Gan <ganboing@gmail.com> Link: https://lore.kernel.org/r/20240830061639.2316-1-ganboing@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In 'cfg80211_scan_6ghz()', an instances of 'struct cfg80211_colocated_ap'
are allocated as if they would have 'ssid' as trailing VLA member. Since
this is not so, extra IEEE80211_MAX_SSID_LEN bytes are not needed.
Briefly tested with KUnit.
When the scan parameters for a 6GHz scan specify a unicast
BSSID address, and the corresponding AP is found in the scan
list, add a corresponding entry in the collocated AP list,
so this AP would be directly probed even if it was not
advertised as a collocated AP.
This is needed for handling a scan request that is intended
for a ML probe flow, where user space can requests a scan
to retrieve information for other links in the AP MLD.
intptr_t and uintptr_t are not big enough types on 32-bit architectures
when printing 64-bit values, resulting to the following incorrect
diagnostic output:
Commit 3c55e94c0ade ("cpufreq: ACPI: Extend frequency tables to cover
boost frequencies") introduced an assumption in acpi_cpufreq_cpu_init()
that the first entry in the P-state table was the nominal frequency.
This assumption is incorrect. The frequency corresponding to the P0
P-State need not be the same as the nominal frequency advertised via
CPPC.
Since the driver is using the CPPC.highest_perf and CPPC.nominal_perf
to compute the boost-ratio, it makes sense to use CPPC.nominal_freq to
compute the max-frequency. CPPC.nominal_freq is advertised on
platforms supporting CPPC revisions 3 or higher.
Hence, fallback to using the first entry in the P-State table only on
platforms that do not advertise CPPC.nominal_freq.
Fixes: 3c55e94c0ade ("cpufreq: ACPI: Extend frequency tables to cover boost frequencies") Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com> Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20250113044107.566-1-gautham.shenoy@amd.com
[ rjw: Retain reverse X-mas tree ordering of local variable declarations ]
[ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When initializing the network card, unplugging the device will
trigger an -EPROTO error, resulting in a flood of error messages
being printed frantically.
It will continue to print more than 2000 times for about 5 minutes,
causing the usb device to be unable to be disconnected. During this
period, the usb port cannot recognize the new device because the old
device has not disconnected.
There may be other operating methods that cause -EPROTO, but -EPROTO is
a low-level hardware error. It is unwise to repeat vendor requests
expecting to read correct data. It is a better choice to treat -EPROTO
and -ENODEV the same way.
Similar to commit 9b0f100c1970 ("mt76: usb: process URBs with status
EPROTO properly") do no schedule rx_worker for urb marked with status
set -EPROTO. I also reproduced this situation when plugging and
unplugging the device, and this patch is effective.
Just do not vendor request again for urb marked with status set -EPROTO.
When recvmsg with MSG_PEEK flag, the data will be copied to
user's buffer without advancing consume cursor and without
reducing the length of rx available data. Once the expected
peek length is larger than the value of bytes_to_rcv, in the
loop of do while in smc_rx_recvmsg, the first loop will copy
bytes_to_rcv bytes of data from the position local_tx_ctrl.cons,
the second loop will copy the min(bytes_to_rcv, read_remaining)
bytes from the position local_tx_ctrl.cons again because of the
lacking of process with advancing consume cursor and reducing
the length of available data. So do the subsequent loops. The
data copied in the second loop and the subsequent loops will
result in data error, as it should not be copied if no more data
arrives and it should be copied from the position advancing
bytes_to_rcv bytes from the local_tx_ctrl.cons if more data arrives.
This issue can be reproduce by the following python script:
server.py:
import socket
import time
server_ip = '0.0.0.0'
server_port = 12346
server_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server_socket.bind((server_ip, server_port))
server_socket.listen(1)
print('Server is running and listening for connections...')
conn, addr = server_socket.accept()
print('Connected by', addr)
while True:
data = conn.recv(1024)
if not data:
break
print('Received request:', data.decode())
conn.sendall(b'Hello, client!\n')
time.sleep(5)
conn.sendall(b'Hello, again!\n')
conn.close()
Fixes: 952310ccf2d8 ("smc: receive data from RMBE") Reported-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Link: https://patch.msgid.link/20250104143201.35529-1-guangguan.wang@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If firmware boot failes, runtime pm is put too often:
[12092.708099] wlcore: ERROR firmware boot failed despite 3 retries
[12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow!
Fix that by redirecting all error gotos before runtime_get so that runtime is
not put.
Fixes: c40aad28a3cf ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Michael Nemanov <michael.nemanov@ti.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
of_regulator_match() does not release the OF node reference in the error
path, resulting in an OF node leak. Therefore, call of_node_put() on the
obtained nodes before returning the EINVAL error.
Since it is possible that some drivers call this function and do not
exit on failure, such as s2mps11_pmic_driver, clear the init_data and
of_node in the error path.
This was reported by an experimental verification tool that I am
developing. As I do not have access to actual devices nor the QEMU board
configuration to test drivers that call this function, no runtime test
was able to be performed.
Fixes: 1c8fa58f4750 ("regulator: Add generic DT parsing for regulators") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Link: https://patch.msgid.link/20250104080453.2153592-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Prevent adding a device which is already a team device lower,
e.g. adding veth0 if vlan1 was already added and veth0 is a lower of
vlan1.
This is not useful in practice and can lead to recursive locking:
$ ip link add veth0 type veth peer name veth1
$ ip link set veth0 up
$ ip link set veth1 up
$ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1
$ ip link add team0 type team
$ ip link set veth0.1 down
$ ip link set veth0.1 master team0
team0: Port device veth0.1 added
$ ip link set veth0 down
$ ip link set veth0 master team0
============================================
WARNING: possible recursive locking detected 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted
--------------------------------------------
ip/7684 is trying to acquire lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
but task is already holding lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977)
other info that might help us debug this:
Possible unsafe locking scenario:
The CLKOUTn may be fed from PLL1/2/3, but the PLL1/2/3 has to be enabled
first by setting PLL_CLKE bit 11 in CCM_ANALOG_SYS_PLLn_GEN_CTRL register.
The CCM_ANALOG_SYS_PLLn_GEN_CTRL bit 11 is modeled by plln_out clock. Fix
the clock tree and place the clkout1/2 under plln_sel instead of plain plln
to let the clock subsystem correctly control the bit 11 and enable the PLL
in case the CLKOUTn is supplied by PLL1/2/3.
Fixes: 43896f56b59e ("clk: imx8mp: add clkout1/2 support") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20241112013718.333771-1-marex@denx.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A redundant frequency update is only truly needed when there is a policy
limits change with a driver that specifies CPUFREQ_NEED_UPDATE_LIMITS.
In spite of that, drivers specifying CPUFREQ_NEED_UPDATE_LIMITS receive a
frequency update _all the time_, not just for a policy limits change,
because need_freq_update is never cleared.
Furthermore, ignore_dl_rate_limit()'s usage of need_freq_update also leads
to a redundant frequency update, regardless of whether or not the driver
specifies CPUFREQ_NEED_UPDATE_LIMITS, when the next chosen frequency is the
same as the current one.
Fix the superfluous updates by only honoring CPUFREQ_NEED_UPDATE_LIMITS
when there's a policy limits change, and clearing need_freq_update when a
requisite redundant update occurs.
This is neatly achieved by moving up the CPUFREQ_NEED_UPDATE_LIMITS test
and instead setting need_freq_update to false in sugov_update_next_freq().
Fixes: 600f5badb78c ("cpufreq: schedutil: Don't skip freq update when limits change") Signed-off-by: Sultan Alsawaf (unemployed) <sultan@kerneltoast.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/20241212015734.41241-2-sultan@kerneltoast.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
netxbig_leds_get_of_pdata() does not release the OF node obtained by
of_parse_phandle() when of_find_device_by_node() fails. Add an
of_node_put() call to fix the leak.
This bug was found by an experimental static analysis tool that I am
developing.
Commit 'cpupower: Make TSC read per CPU for Mperf monitor' (c2adb1877b7)
changes TSC counter reads per cpu, but left time diff global (from start
of all cpus to end of all cpus), thus diff(time) is too large for a
cpu's tsc counting, resulting in far less than acutal TSC_Mhz and thus
`cpupower monitor` showing far less than actual cpu realtime frequency.
Fixes: c2adb1877b76 ("cpupower: Make TSC read per CPU for Mperf monitor") Signed-off-by: He Rongguang <herongguang@linux.alibaba.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
At probe error path, the firmware loading work may have already been
queued. In such a case, it will try to access memory allocated by the probe
function, which is about to be released. In such paths, wait for the
firmware worker to finish before releasing memory.
When init_sw_vars fails, rtl_deinit_core should not be called, specially
now that it destroys the rtl_wq workqueue.
And call rtl_pci_deinit and deinit_sw_vars, otherwise, memory will be
leaked.
Remove pci_set_drvdata call as it will already be cleaned up by the core
driver code and could lead to memory leaks too. cf. commit 8d450935ae7f
("wireless: rtlwifi: remove unnecessary pci_set_drvdata()") and
commit 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory").
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241206173713.3222187-4-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
rtl_wq is allocated at rtl_init_core, so it makes more sense to destroy it
at rtl_deinit_core. In the case of USB, where _rtl_usb_init does not
require anything to be undone, that is fine. But for PCI, rtl_pci_init,
which is called after rtl_init_core, needs to deallocate data, but only if
it has been called.
That means that destroying the workqueue needs to be done whether
rtl_pci_init has been called or not. And since rtl_pci_deinit was doing it,
it has to be moved out of there.
It makes more sense to move it to rtl_deinit_core and have it done in both
cases, USB and PCI.
Since this is a requirement for a followup memory leak fix, mark this as
fixing such memory leak.
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241206173713.3222187-3-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 2461c7d60f9f ("rtlwifi: Update header file") introduced a global
list of private data structures.
Later on, commit 26634c4b1868 ("rtlwifi Modify existing bits to match
vendor version 2013.02.07") started adding the private data to that list at
probe time and added a hook, check_buddy_priv to find the private data from
a similar device.
However, that function was never used.
Besides, though there is a lock for that list, it is never used. And when
the probe fails, the private data is never removed from the list. This
would cause a second probe to access freed memory.
Remove the unused hook, structures and members, which will prevent the
potential race condition on the list and its corruption during a second
probe when probe fails.
Fixes: 26634c4b1868 ("rtlwifi Modify existing bits to match vendor version 2013.02.07") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241206173713.3222187-2-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Drop unused 'dualmac_easyconcurrent_retrytimer' of 'struct rtl_works',
corresponding 'rtl_easy_concurrent_retrytimer_callback()' handler,
'dualmac_easy_concurrent' function pointer of 'struct rtl_hal_ops'
and related call to 'timer_setup()' in '_rtl_init_deferred_work()'.
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
The term "slot ID" has nothing to do with the SDIO function number
which is specified in the reg property of the subnodes, rephrase
the description to be more accurate.
Fixes: f9b7989859dd ("dt-bindings: mmc: Add YAML schemas for the generic MMC options") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20241128-topic-amlogic-arm32-upstream-bindings-fixes-convert-meson-mx-sdio-v4-1-11d9f9200a59@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
rtl_init_core creates a workqueue that is then assigned to rtl_wq.
rtl_deinit_core does not destroy it. It is left to rtl_usb_deinit, which
must be called in the probe error path.
Fixes: 2ca20f79e0d8 ("rtlwifi: Add usb driver") Fixes: 851639fdaeac ("rtlwifi: Modify some USB de-initialize code.") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-6-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If ieee80211_register_hw fails, the memory allocated for the firmware will
not be released. Call deinit_sw_vars as the function that undoes the
allocationes done by init_sw_vars.
Fixes: cefe3dfdb9f5 ("rtl8192cu: Call ieee80211_register_hw from rtl_usb_probe") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-5-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
At probe error path, the firmware loading work may have already been
queued. In such a case, it will try to access memory allocated by the probe
function, which is about to be released. In such paths, wait for the
firmware worker to finish before releasing memory.
Fixes: a7f7c15e945a ("rtlwifi: rtl8192cu: Free ieee80211_hw if probing fails") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-4-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Variable err is assigned -ENODEV followed by an error return path
via label error_out that does not access the variable and returns
with the -ENODEV error return code. The assignment to err is
redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210327230014.25554-1-colin.king@canonical.com
Stable-dep-of: b4b26642b31e ("wifi: rtlwifi: wait for firmware loading before releasing memory") Signed-off-by: Sasha Levin <sashal@kernel.org>
Just like in commit 4dfde294b979 ("rtlwifi: rise completion at the last
step of firmware callback"), only signal completion once the function is
finished. Otherwise, the module removal waiting for the completion could
free the memory that the callback will still use before returning.
Fixes: b0302aba812b ("rtlwifi: Convert to asynchronous firmware load") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241107133322.855112-3-cascardo@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1b57d91b969c ("irqchip/gic-v2, v3: Prevent SW resends entirely")
sett the flag which enforces interrupt handling in interrupt context and
prevents software base resends for ARM GIC v2/v3.
But it missed that the helper function which checks the flag was hidden
behind CONFIG_GENERIC_PENDING_IRQ, which is not set by ARM[64].
Make the helper unconditionally available so that the enforcement actually
works.
The function atomctrl_get_smc_sclk_range_table() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to
retrieve SMU_Info table, it returns NULL which is later dereferenced.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In practice this should never happen as this code only gets called
on polaris chips and the vbios data table will always be present on
those chips.
Fixes: a23eefa2f461 ("drm/amd/powerplay: enable dpm for baffin.") Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the etnaviv_gem_vmap_impl() function, the driver vmap whatever buffers
with write combine(WC) page property, this is incorrect. Cached buffers
should be mapped with the cached page property and uncached buffers should
be mapped with the uncached page property.
Fixes: a0a5ab3e99b8 ("drm/etnaviv: call correct function when trying to vmap a DMABUF") Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a pair of bugs in the fallback handling for the YFS.RemoveFile2 RPC
call:
(1) Fix the abort code check to also look for RXGEN_OPCODE. The lack of
this masks the second bug.
(2) call->server is now not used for ordinary filesystem RPC calls that
have an operation descriptor. Fix to use call->op->server instead.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/109541.1736865963@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On powerpc/32s, user_read_access_begin/end() are no-ops, but the
failure path has a user_access_end() instead of user_read_access_end()
which means an access end without any prior access begin.
Replace that user_access_end() by user_read_access_end().
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index csi is already used. This fix adds an
error check of the return value of xa_store() in nvme_get_effects_log().
Fixes: 1cf7a12e09aa ("nvme: use an xarray to lookup the Commands Supported and Effects log") Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:
nbd_genl_disconnect
nbd_disconnect_and_put
nbd_disconnect
flush_workqueue(nbd->recv_workq)
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
nbd_config_put
-> due to step 1), reference is still not zero
The AFS directory format structure, union afs_xdr_dir_block::meta, has too
many alloc counter slots declared and so pushes the hash table along and
over the data. This doesn't cause a problem at the moment because I'm
currently ignoring the hash table and only using the correct number of
alloc_ctrs in the code anyway. In future, however, I should start using
the hash table to try and speed up afs_lookup().
Fix this by using the correct constant to declare the counter array.
Fixes: 4ea219a839bf ("afs: Split the directory content defs into a header") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-14-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
AFS servers pass back a code indicating EEXIST when they're asked to remove
a directory that is not empty rather than ENOTEMPTY because not all the
systems that an AFS server can run on have the latter error available and
AFS preexisted the addition of that error in general.
Fix afs_rmdir() to translate EEXIST to ENOTEMPTY.
Fixes: 260a980317da ("[AFS]: Add "directory write" support.") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-13-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9734fd7a2777 ("xhci: use pm_ptr() instead of #ifdef for CONFIG_PM
conditionals") did not quite work properly in the 5.15.y branch where it was
applied to fix a build error when CONFIG_PM was set as it left the following
build errors still present:
A recent patch caused an unused-function warning in builds with
CONFIG_PM disabled, after the function became marked 'static':
drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function]
91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
| ^~~~~~~~~~~~~~~~~~~
This could be solved by adding another #ifdef, but as there is
a trend towards removing CONFIG_PM checks in favor of helper
macros, do the same conversion here and use pm_ptr() to get
either a function pointer or NULL but avoid the warning.
As the hidden functions reference some other symbols, make
sure those are visible at compile time, at the minimal cost of
a few extra bytes for 'struct usb_device'.
Fixes: 9abe15d55dcc ("xhci: Move xhci MSI sync function to to xhci-pci") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL
after job completion"), we introduced a change to assign the job pointer
to NULL after completing a job, indicating job completion.
However, this approach created a race condition between the DRM
scheduler workqueue and the IRQ execution thread. As soon as the fence is
signaled in the IRQ execution thread, a new job starts to be executed.
This results in a race condition where the IRQ execution thread sets the
job pointer to NULL simultaneously as the `run_job()` function assigns
a new job to the pointer.
This race condition can lead to a NULL pointer dereference if the IRQ
execution thread sets the job pointer to NULL after `run_job()` assigns
it to the new job. When the new job completes and the GPU emits an
interrupt, `v3d_irq()` is triggered, potentially causing a crash.
Fix the crash by assigning the job pointer to NULL before signaling the
fence. This ensures that the job pointer is cleared before any new job
starts execution, preventing the race condition and the NULL pointer
dereference crash.
Cc: stable@vger.kernel.org Fixes: e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Tested-by: Phil Elwell <phil@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250123012403.20447-1-mcanal@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although it mimics the Microsoft's VendorID, it is in fact a clone.
Taking into account that the original Microsoft Receiver is not being
manufactured anymore, this drive can solve dpad issues encontered by
those who still use the original 360 Wireless controller
but are using a receiver clone.
Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.
Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.
MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.
This patch addresses a null-ptr-deref in qt2_process_read_urb() due to
an incorrect bounds check in the following:
if (newport > serial->num_ports) {
dev_err(&port->dev,
"%s - port change to invalid port: %i\n",
__func__, newport);
break;
}
The condition doesn't account for the valid range of the serial->port
buffer, which is from 0 to serial->num_ports - 1. When newport is equal
to serial->num_ports, the assignment of "port" in the
following code is out-of-bounds and NULL:
serial_priv->current_port = newport;
port = serial->port[serial_priv->current_port];
The fix checks if newport is greater than or equal to serial->num_ports
indicating it is out-of-bounds.
Reported-by: syzbot <syzbot+506479ebf12fe435d01a@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=506479ebf12fe435d01a Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: <stable@vger.kernel.org> # 3.5 Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Validate index before access iwl_rate_mcs to keep rate->index
inside the valid boundaries. Use MCS_0_INDEX if index is less
than MCS_0_INDEX and MCS_9_INDEX if index is greater then
MCS_9_INDEX.
The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.
Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].
[1]
WARNING: suspicious RCU usage 6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
count and offset are passed from user space and not checked, only
offset is capped to 40 bits, which can be used to read/write out of
bounds of the device.
Fixes: 6e3f26456009 (“vfio/platform: read and write support for the device fd”) Cc: stable@vger.kernel.org Reported-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Tested-by: Mostafa Saleh <smostafa@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the fpsp040 code when copyin or copyout fails call
force_sigsegv(SIGSEGV) instead of do_exit(SIGSEGV).
This solves a couple of problems. Because do_exit embeds the ptrace
stop PTRACE_EVENT_EXIT a complete stack frame needs to be present for
that to work correctly. There is always the information needed for a
ptrace stop where get_signal is called. So exiting with a signal
solves the ptrace issue.
Further exiting with a signal ensures that all of the threads in a
process are killed not just the thread that malfunctioned. Which
avoids confusing userspace.
To make force_sigsegv(SIGSEGV) work in fpsp040_die modify the code to
save all of the registers and jump to ret_from_exception (which
ultimately calls get_signal) after fpsp040_die returns.
v2: Updated the branches to use gas's pseudo ops that automatically
calculate the best branch instruction to use for the purpose.
We get there when sigreturn has performed obscene acts on kernel stack;
in particular, the location of pt_regs has shifted. We are about to call
syscall_trace(), which might stop for tracer. If that happens, we'd better
have task_pt_regs() returning correct result...
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: bd6f56a75bb2 ("m68k: Missing syscall_trace() on sigreturn") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/YP2dMWeV1LkHiOpr@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haowei Yan <g1042620637@gmail.com> found that ets_class_from_arg() can
index an Out-Of-Bound class in ets_class_from_arg() when passed clid of
0. The overflow may cause local privilege escalation.
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc") Reported-by: Haowei Yan <g1042620637@gmail.com> Suggested-by: Haowei Yan <g1042620637@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250111145740.74755-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag:
depending on that flag, the pages in the address space will either use
buffer heads or iomap_folio_state structs, and we cannot mix the two.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When switching to selects for MFD_WM8994 a dependency should have also
been added for I2C, as the dependency on MFD_WM8994 will not be
considered by the select.
Fixes: fd55c6065bec ("ASoC: samsung: Add missing selects for MFD_WM8994") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501082020.2bpGGVTW-lkp@intel.com/ Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250108134828.246570-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some boards with Allwinner SoCs connect the PMIC's IRQ pin to the SoC's NMI
pin instead of a normal GPIO. Since the power key is connected to the PMIC,
and people expect to wake up a suspended system via this key, the NMI IRQ
controller must stay alive when the system goes into suspend.
Add the SKIP_WAKE flag to prevent the sunxi NMI controller from going to
sleep, so that the power key can wake up those systems.
The ISCSI_UEVENT_GET_HOST_STATS request is already handled in
iscsi_get_host_stats(). This fix ensures that redundant responses are
skipped in iscsi_if_rx().
- On success: send reply and stats from iscsi_get_host_stats()
within if_recv_msg().
- On error: fall through.
Signed-off-by: Xiang Zhang <hawkxiang.cpp@gmail.com> Link: https://lore.kernel.org/r/20250107022432.65390-1-hawkxiang.cpp@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using !CONFIG_SECCOMP with CONFIG_GENERIC_ENTRY, the
randconfig bots found the following snag:
kernel/entry/common.c: In function 'syscall_trace_enter':
>> kernel/entry/common.c:52:23: error: implicit declaration
of function '__secure_computing' [-Wimplicit-function-declaration]
52 | ret = __secure_computing(NULL);
| ^~~~~~~~~~~~~~~~~~
Since generic entry calls __secure_computing() unconditionally,
fix this by moving the stub out of the ifdef clause for
CONFIG_HAVE_ARCH_SECCOMP_FILTER so it's always available.
projects / thirdparty / kernel / stable.git / log
