The TDG.VP.INFO TDCALL provides the guest with various details about
the TDX system that the guest needs to run. Only one field is currently
used: 'gpa_width' which tells the guest which PTE bits mark pages shared
or private.
A second field is now needed: the guest "TD attributes" to tell if
virtualization exceptions are configured in a way that can harm the guest.
Make the naming and calling convention more generic and discrete from the
mask-centric one.
Thanks to Sathya for the inspiration here, but there's no code, comments
or changelogs left from where he started.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When expanding a file system using online resize, various fields in
the superblock (e.g., s_blocks_count, s_inodes_count, etc.) change.
To update the backup superblocks, the online resize uses the function
update_backups() in fs/ext4/resize.c. This function was not updating
the checksum field in the backup superblocks. This wasn't a big deal
previously, because e2fsck didn't care about the checksum field in the
backup superblock. (And indeed, update_backups() goes all the way
back to the ext3 days, well before we had support for metadata
checksums.)
However, there is an alternate, more general way of updating
superblock fields, ext4_update_primary_sb() in fs/ext4/ioctl.c. This
function does check the checksum of the backup superblock, and if it
doesn't match will mark the file system as corrupted. That was
clearly not the intent, so avoid to aborting the resize when a bad
superblock is found.
In addition, teach update_backups() to properly update the checksum in
the backup superblocks. We will eventually want to unify
updapte_backups() with the infrasture in ext4_update_primary_sb(), but
that's for another day.
Note: The problem has been around for a while; it just didn't really
matter until ext4_update_primary_sb() was added by commit bbc605cdb1e1
("ext4: implement support for get/set fs label"). And it became
trivially easy to reproduce after commit 827891a38acc ("ext4: update
the s_overhead_clusters in the backup sb's when resizing") in v6.0.
The rec_len field in the directory entry has to be a multiple of 4. A
corrupted filesystem image can be used to hit a BUG() in
ext4_rec_len_to_disk(), called from make_indexed_dir().
Avoid that the hardware path is shown twice in the kernel log, and clean
up the output of the version numbers to show up in the same order as
they are listed in the hardware database in the hardware.c file.
Additionally, optimize the memory footprint of the hardware database
and mark some code as init code.
Although the name of the driver 8250_gsc.c suggests that it handles
only serial ports on the GSC bus, it does handle serial ports listed
in the parisc machine inventory as well, e.g. the serial ports in a
C8000 PCI-only workstation.
Change the dependency to CONFIG_PARISC, so that the driver gets included
in the kernel even if CONFIG_GSC isn't set.
Without this only the client initiated tcp sockets have SOCK_SUPPORT_ZC.
The listening socket on the server also has it, but the accepted
connections didn't, which meant IORING_OP_SEND[MSG]_ZC will always
fails with -EOPNOTSUPP.
Fixes: e993ffe3da4b ("net: flag sockets supporting msghdr originated zerocopy") Cc: <stable@vger.kernel.org> # 6.0 CC: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/io-uring/20221024141503.22b4e251@kernel.org/T/#m38aa19b0b825758fb97860a38ad13122051f9dda Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The intel_pebs_isolation quirk checks both model number and stepping.
Cooper Lake has a different stepping (11) than the other Skylake Xeon.
It cannot benefit from the optimization in commit 9b545c04abd4f
("perf/x86/kvm: Avoid unnecessary work in guest filtering").
Add the stepping of Cooper Lake into the isolation_ucodes[] table.
Fix our design flaw in supply voltage distribution on the Quad and QuadPlus
based boards.
The problem is that we supply the SoC cache (VDD_CACHE_CAP) from VDD_PU
instead of VDD_SOC. The VDD_PU internal regulator can be disabled by PM
if VPU or GPU is not used. If that happens the system freezes. To prevent
that configure the reg_pu regulator to be always on.
The cortex_a76_erratum_1463225_debug_handler() function is called when
handling debug exceptions (and synchronous exceptions from BRK
instructions), and so is called when a probed function executes. If the
compiler does not inline cortex_a76_erratum_1463225_debug_handler(), it
can be probed.
If cortex_a76_erratum_1463225_debug_handler() is probed, any debug
exception or software breakpoint exception will result in recursive
exceptions leading to a stack overflow. This can be triggered with the
ftrace multiple_probes selftest, and as per the example splat below.
... which removed the NOKPROBE_SYMBOL() annotation associated with the
function.
My intent was that cortex_a76_erratum_1463225_debug_handler() would be
inlined into its caller, el1_dbg(), which is marked noinstr and cannot
be probed. Mark cortex_a76_erratum_1463225_debug_handler() as
__always_inline to ensure this.
Example splat prior to this patch (with recursive entries elided):
Commit 8a254d90a775 ("efi: efivars: Fix variable writes without
query_variable_store()") addressed an issue that was introduced during
the EFI variable store refactor, where alternative implementations of
the efivars layer that lacked query_variable_store() would no longer
work.
Unfortunately, there is another case to consider here, which was missed:
if the efivars layer is backed by the EFI runtime services as usual, but
the EFI implementation predates the introduction of QueryVariableInfo(),
we will return EFI_UNSUPPORTED, and this is no longer being dealt with
correctly.
So let's fix this, and while at it, clean up the code a bit, by merging
the check_var_size() routines as well as their callers.
EFI runtime services data is guaranteed to be preserved by the OS,
making it a suitable candidate for the EFI random seed table, which may
be passed to kexec kernels as well (after refreshing the seed), and so
we need to ensure that the memory is preserved without support from the
OS itself.
However, runtime services data is intended for allocations that are
relevant to the implementations of the runtime services themselves, and
so they are unmapped from the kernel linear map, and mapped into the EFI
page tables that are active while runtime service invocations are in
progress. None of this is needed for the RNG seed.
So let's switch to EFI 'ACPI reclaim' memory: in spite of the name,
there is nothing exclusively ACPI about it, it is simply a type of
allocation that carries firmware provided data which may or may not be
relevant to the OS, and it is left up to the OS to decide whether to
reclaim it after having consumed its contents.
Given that in Linux, we never reclaim these allocations, it is a good
choice for the EFI RNG seed, as the allocation is guaranteed to survive
kexec reboots.
One additional reason for changing this now is to align it with the
upcoming recommendation for EFI bootloader provided RNG seeds, which
must not use EFI runtime services code/data allocations.
We no longer need at least 64 bytes of random seed to permit the early
crng init to complete. The RNG is now based on Blake2s, so reduce the
EFI seed size to the Blake2s hash size, which is sufficient for our
purposes.
While at it, drop the READ_ONCE(), which was supposed to prevent size
from being evaluated after seed was unmapped. However, this cannot
actually happen, so READ_ONCE() is unnecessary here.
The only (forced) static test binary doesn't depend on libcap. Because
using -lcap on systems that don't have such static library would fail
(e.g. on Arch Linux), let's be more specific and require only dynamic
libcap linking.
There's a race in fuse's readdir cache that can result in an uninitilized
page being read. The page lock is supposed to prevent this from happening
but in the following case it doesn't:
Two fuse_add_dirent_to_cache() start out and get the same parameters
(size=0,offset=0). One of them wins the race to create and lock the page,
after which it fills in data, sets rdc.size and unlocks the page.
In the meantime the page gets evicted from the cache before the other
instance gets to run. That one also creates the page, but finds the
size to be mismatched, bails out and leaves the uninitialized page in the
cache.
Fix by marking a filled page uptodate and ignoring non-uptodate pages.
In cap_inode_getsecurity(), we will use vfs_getxattr_alloc() to
complete the memory allocation of tmpbuf, if we have completed
the memory allocation of tmpbuf, but failed to call handler->get(...),
there will be a memleak in below logic:
|-- ret = (int)vfs_getxattr_alloc(mnt_userns, ...)
| /* ^^^ alloc for tmpbuf */
|-- value = krealloc(*xattr_value, error + 1, flags)
| /* ^^^ alloc memory */
|-- error = handler->get(handler, ...)
| /* error! */
|-- *xattr_value = value
| /* xattr_value is &tmpbuf (memory leak!) */
So we will try to free(tmpbuf) after vfs_getxattr_alloc() fails to fix it.
Cc: stable@vger.kernel.org Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Serge Hallyn <serge@hallyn.com>
[PM: subject line and backtrace tweaks] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The C standard says that memcmp() must treat the buffers as consisting
of "unsigned chars". If char happens to be unsigned, the casts are ok,
but then obviously the c1 variable can never contain a negative
value. And when char is signed, the casts are wrong, and there's still
a problem with using an 8-bit quantity to hold the difference, because
that can range from -255 to +255.
For example, assuming char is signed, comparing two 1-byte buffers,
one containing 0x00 and another 0x80, the current implementation would
return -128 for both memcmp(a, b, 1) and memcmp(b, a, 1), whereas one
of those should of course return something positive.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some machines the number of listed CPUs may be bigger than the actual
CPUs that exist. The tracing subsystem allocates a per_cpu directory with
access to the per CPU ring buffer via a cpuX file. But to save space, the
ring buffer will only allocate buffers for online CPUs, even though the
CPU array will be as big as the nr_cpu_ids.
With the addition of waking waiters on the ring buffer when closing the
file, the ring_buffer_wake_waiters() now needs to make sure that the
buffer is allocated (with the irq_work allocated with it) before trying to
wake waiters, as it will cause a NULL pointer dereference.
While debugging this, I added a NULL check for the buffer itself (which is
OK to do), and also NULL pointer checks against buffer->buffers (which is
not fine, and will WARN) as well as making sure the CPU number passed in
is within the nr_cpu_ids (which is also not fine if it isn't).
In aggregate kprobe case, when arm_kprobe failed,
we need set the kp->flags with KPROBE_FLAG_DISABLED again.
If not, the 'kp' kprobe will been considered as enabled
but it actually not enabled.
test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak
when there is no failure. Move kfree(buf) from fail path to common path
to prevent the memleak. The same reason and solution in
test_gen_kretprobe_cmd().
Check if fp->rethook succeeded to be allocated. Otherwise, if
rethook_alloc() fails, then we end up dereferencing a NULL pointer in
rethook_add_node().
Since commit ab51e15d535e ("fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag
for fprobe") introduced fprobe_kprobe_handler() for fprobe::ops::func,
unregister_fprobe() fails to unregister the registered if user specifies
FPROBE_FL_KPROBE_SHARED flag.
Moreover, __register_ftrace_function() is possible to change the
ftrace_ops::func, thus we have to check fprobe::ops::saved_func instead.
To check it correctly, it should confirm the fprobe::ops::saved_func is
either fprobe_handler() or fprobe_kprobe_handler().
KASAN reported a use-after-free with ftrace ops [1]. It was found from
vmcore that perf had registered two ops with the same content
successively, both dynamic. After unregistering the second ops, a
use-after-free occurred.
In ftrace_shutdown(), when the second ops is unregistered, the
FTRACE_UPDATE_CALLS command is not set because there is another enabled
ops with the same content. Also, both ops are dynamic and the ftrace
callback function is ftrace_ops_list_func, so the
FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value
of 'command' will be 0 and ftrace_shutdown() will skip the rcu
synchronization.
However, ftrace may be activated. When the ops is released, another CPU
may be accessing the ops. Add the missing synchronization to fix this
problem.
[1]
BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468
When programming port decode targets, the algorithm wants to ensure that
two devices are compatible to be programmed as peers beneath a given
port. A compatible peer is a target that shares the same dport, and
where that target's interleave position also routes it to the same
dport. Compatibility is determined by the device's interleave position
being >= to distance. For example, if a given dport can only map every
Nth position then positions less than N away from the last target
programmed are incompatible.
The @distance for the host-bridge's cxl_port in a simple dual-ported
host-bridge configuration with 2 direct-attached devices is 1, i.e. An
x2 region divided by 2 dports to reach 2 region targets.
An x4 region under an x2 host-bridge would need 2 intervening switches
where the @distance at the host bridge level is 2 (x4 region divided by
2 switches to reach 4 devices).
However, the distance between peers underneath a single ported
host-bridge is always zero because there is no limit to the number of
devices that can be mapped. In other words, there are no decoders to
program in a passthrough, all descendants are mapped and distance only
starts matters for the intervening descendant ports of the passthrough
port.
Add tracking for the number of dports mapped to a port, and use that to
detect the passthrough case for calculating @distance.
When a region is deleted any targets that have been previously assigned
to that region hold references to it. Trigger those references to
drop by detaching all targets at unregister_region() time.
Otherwise that region object will leak as userspace has lost the ability
to detach targets once region sysfs is torn down.
Cc: <stable@vger.kernel.org> Fixes: b9686e8c8e39 ("cxl/region: Enable the assignment of endpoint decoders to regions") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/166752183055.947915.17681995648556534844.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
store_targetN+0x655/0x1740:
alloc_region_ref at drivers/cxl/core/region.c:676
(inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850
(inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290
(inlined by) attach_target at drivers/cxl/core/region.c:1410
(inlined by) store_targetN at drivers/cxl/core/region.c:1453
Cc: <stable@vger.kernel.org> Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders") Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166752182461.947915.497032805239915067.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an intermediate port's decoders have been exhausted by existing
regions, and creating a new region with the port in question in it's
hierarchical path is attempted, cxl_port_attach_region() fails to find a
port decoder (as would be expected), and drops into the failure / cleanup
path.
However, during cleanup of the region reference, a sanity check attempts
to dereference the decoder, which in the above case didn't exist. This
causes a NULL pointer dereference BUG.
To fix this, refactor the decoder allocation and de-allocation into
helper routines, and in this 'free' routine, check that the decoder,
@cxld, is valid before attempting any operations on it.
Cc: <stable@vger.kernel.org> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders") Link: https://lore.kernel.org/r/20221101074100.1732003-1-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a cxl_nvdimm object goes through a ->remove() event (device
physically removed, nvdimm-bridge disabled, or nvdimm device disabled),
then any associated regions must also be disabled. As highlighted by the
cxl-create-region.sh test [1], a single device may host multiple
regions, but the driver was only tracking one region at a time. This
leads to a situation where only the last enabled region per nvdimm
device is cleaned up properly. Other regions are leaked, and this also
causes cxl_memdev reference leaks.
Fix the tracking by allowing cxl_nvdimm objects to track multiple region
associations.
The ACPI CEDT.CFMWS indicates a range of possible address where new CXL
regions can appear. Each range is associated with a QTG id (QoS
Throttling Group id). For each range + QTG pair that is not covered by a proximity
domain in the SRAT, Linux creates a new NUMA node. However, the commit
that added the new ranges missed updating the node_possible mask which
causes memory_group_register() to fail. Add the new nodes to the
nodes_possible mask.
Cc: <stable@vger.kernel.org> Fixes: fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT") Cc: Alison Schofield <alison.schofield@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/166631003537.1167078.9373680312035292395.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After allocation 'dip' is tested instead of 'dip->csums'. Fix it.
Fixes: 642c5d34da53 ("btrfs: allocate the btrfs_dio_private as part of the iomap dio bio") CC: stable@vger.kernel.org # 5.19+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[BUG]
There are two reports (the earliest one from LKP, a more recent one from
kernel bugzilla) that we can have some chunks with 0 as sub_stripes.
This will cause divide-by-zero errors at btrfs_rmap_block, which is
introduced by a recent kernel patch ac0677348f3c ("btrfs: merge
calculations for simple striped profiles in btrfs_rmap_block"):
[CAUSE]
From the more recent report, it has been proven that we have some chunks
with 0 as sub_stripes, mostly caused by older mkfs.
It turns out that the mkfs.btrfs fix is only introduced in 6718ab4d33aa
("btrfs-progs: Initialize sub_stripes to 1 in btrfs_alloc_data_chunk")
which is included in v5.4 btrfs-progs release.
So there would be quite some old filesystems with such 0 sub_stripes.
[FIX]
Just don't trust the sub_stripes values from disk.
We have a trusted btrfs_raid_array[] to fetch the correct sub_stripes
numbers for each profile and that are fixed.
By this, we can keep the compatibility with older filesystems while
still avoid divide-by-zero bugs.
Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Viktor Kuzmin <kvaster@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216559 Fixes: ac0677348f3c ("btrfs: merge calculations for simple striped profiles in btrfs_rmap_block") CC: stable@vger.kernel.org # 6.0 Reviewed-by: Su Yue <glass@fydeos.io> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The type of parameter generation has been u32 since the beginning,
however all callers pass a u64 generation, so unify the types to prevent
potential loss.
CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
switch (tm->op) {
case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING:
BUG_ON(tm->slot < n);
This occurs because we replay the nodes in order that they happened, and
when we do a REPLACE we will log a REMOVE_WHILE_FREEING for every slot,
starting at 0. 'n' here is the number of items in this block, which in
this case was 1, but we had 2 REMOVE_WHILE_FREEING operations.
The actual root cause of this was that we were replaying operations for
a block that shouldn't have been replayed. Consider the following
sequence of events
1. We have an already modified root, and we do a btrfs_get_tree_mod_seq().
2. We begin removing items from this root, triggering KEY_REPLACE for
it's child slots.
3. We remove one of the 2 children this root node points to, thus triggering
the root node promotion of the remaining child, and freeing this node.
4. We modify a new root, and re-allocate the above node to the root node of
this other root.
The tree mod log looks something like this
logical 0 op KEY_REPLACE (slot 1) seq 2
logical 0 op KEY_REMOVE (slot 1) seq 3
logical 0 op KEY_REMOVE_WHILE_FREEING (slot 0) seq 4
logical 4096 op LOG_ROOT_REPLACE (old logical 0) seq 5
logical 8192 op KEY_REMOVE_WHILE_FREEING (slot 1) seq 6
logical 8192 op KEY_REMOVE_WHILE_FREEING (slot 0) seq 7
logical 0 op LOG_ROOT_REPLACE (old logical 8192) seq 8
>From here the bug is triggered by the following steps
1. Call btrfs_get_old_root() on the new_root.
2. We call tree_mod_log_oldest_root(btrfs_root_node(new_root)), which is
currently logical 0.
3. tree_mod_log_oldest_root() calls tree_mod_log_search_oldest(), which
gives us the KEY_REPLACE seq 2, and since that's not a
LOG_ROOT_REPLACE we incorrectly believe that we don't have an old
root, because we expect that the most recent change should be a
LOG_ROOT_REPLACE.
4. Back in tree_mod_log_oldest_root() we don't have a LOG_ROOT_REPLACE,
so we don't set old_root, we simply use our existing extent buffer.
5. Since we're using our existing extent buffer (logical 0) we call
tree_mod_log_search(0) in order to get the newest change to start the
rewind from, which ends up being the LOG_ROOT_REPLACE at seq 8.
6. Again since we didn't find an old_root we simply clone logical 0 at
it's current state.
7. We call tree_mod_log_rewind() with the cloned extent buffer.
8. Set n = btrfs_header_nritems(logical 0), which would be whatever the
original nritems was when we COWed the original root, say for this
example it's 2.
9. We start from the newest operation and work our way forward, so we
see LOG_ROOT_REPLACE which we ignore.
10. Next we see KEY_REMOVE_WHILE_FREEING for slot 0, which triggers the
BUG_ON(tm->slot < n), because it expects if we've done this we have a
completely empty extent buffer to replay completely.
The correct thing would be to find the first LOG_ROOT_REPLACE, and then
get the old_root set to logical 8192. In fact making that change fixes
this particular problem.
However consider the much more complicated case. We have a child node
in this tree and the above situation. In the above case we freed one
of the child blocks at the seq 3 operation. If this block was also
re-allocated and got new tree mod log operations we would have a
different problem. btrfs_search_old_slot(orig root) would get down to
the logical 0 root that still pointed at that node. However in
btrfs_search_old_slot() we call tree_mod_log_rewind(buf) directly. This
is not context aware enough to know which operations we should be
replaying. If the block was re-allocated multiple times we may only
want to replay a range of operations, and determining what that range is
isn't possible to determine.
We could maybe solve this by keeping track of which root the node
belonged to at every tree mod log operation, and then passing this
around to make sure we're only replaying operations that relate to the
root we're trying to rewind.
However there's a simpler way to solve this problem, simply disallow
reallocations if we have currently running tree mod log users. We
already do this for leaf's, so we're simply expanding this to nodes as
well. This is a relatively uncommon occurrence, and the problem is
complicated enough I'm worried that we will still have corner cases in
the reallocation case. So fix this in the most straightforward way
possible.
Fixes: bd989ba359f2 ("Btrfs: add tree modification log functions") CC: stable@vger.kernel.org # 3.3+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When doing a direct IO write using a iocb with nowait and dsync set, we
end up not syncing the file once the write completes.
This is because we tell iomap to not call generic_write_sync(), which
would result in calling btrfs_sync_file(), in order to avoid a deadlock
since iomap can call it while we are holding the inode's lock and
btrfs_sync_file() needs to acquire the inode's lock. The deadlock happens
only if the write happens synchronously, when iomap_dio_rw() calls
iomap_dio_complete() before it returns. Instead we do the sync ourselves
at btrfs_do_write_iter().
For a nowait write however we can end up not doing the sync ourselves at
at btrfs_do_write_iter() because the write could have been queued, and
therefore we get -EIOCBQUEUED returned from iomap in such case. That makes
us skip the sync call at btrfs_do_write_iter(), as we don't do it for
any error returned from btrfs_direct_write(). We can't simply do the call
even if -EIOCBQUEUED is returned, since that would block the task waiting
for IO, both for the data since there are bios still in progress as well
as potentially blocking when joining a log transaction and when syncing
the log (writing log trees, super blocks, etc).
So let iomap do the sync call itself and in order to avoid deadlocks for
the case of synchronous writes (without nowait), use __iomap_dio_rw() and
have ourselves call iomap_dio_complete() after unlocking the inode.
A test case will later be sent for fstests, after this is fixed in Linus'
tree.
Fixes: 51bd9563b678 ("btrfs: fix deadlock due to page faults during direct IO reads and writes") Reported-by: Марк Коренберг <socketpair@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAEmTpZGRKbzc16fWPvxbr6AfFsQoLmz-Lcg-7OgJOZDboJ+SGQ@mail.gmail.com/ CC: stable@vger.kernel.org # 6.0+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On R-Car V4H, all PLLs except PLL5 support Spread Spectrum and/or
Fractional Multiplication to reduce electromagnetic interference.
Add the SASYNCPER and SASYNCPERD[124] clocks, which are used as clock
sources for modules that must not be affected by Spread Spectrum and/or
Fractional Multiplication.
Commit d7e7b9af104c ("fscrypt: stop using keyrings subsystem for
fscrypt_master_key") moved the keyring destruction from __put_super() to
generic_shutdown_super() so that the filesystem's block device(s) are
still available. Unfortunately, this causes a memory leak in the case
where a mount is attempted with the test_dummy_encryption mount option,
but the mount fails after the option has already been processed.
To fix this, attempt the keyring destruction in both places.
Reported-by: syzbot+104c2a89561289cec13e@syzkaller.appspotmail.com Fixes: d7e7b9af104c ("fscrypt: stop using keyrings subsystem for fscrypt_master_key") Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20221011213838.209879-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The approach of fs/crypto/ internally managing the fscrypt_master_key
structs as the payloads of "struct key" objects contained in a
"struct key" keyring has outlived its usefulness. The original idea was
to simplify the code by reusing code from the keyrings subsystem.
However, several issues have arisen that can't easily be resolved:
- When a master key struct is destroyed, blk_crypto_evict_key() must be
called on any per-mode keys embedded in it. (This started being the
case when inline encryption support was added.) Yet, the keyrings
subsystem can arbitrarily delay the destruction of keys, even past the
time the filesystem was unmounted. Therefore, currently there is no
easy way to call blk_crypto_evict_key() when a master key is
destroyed. Currently, this is worked around by holding an extra
reference to the filesystem's request_queue(s). But it was overlooked
that the request_queue reference is *not* guaranteed to pin the
corresponding blk_crypto_profile too; for device-mapper devices that
support inline crypto, it doesn't. This can cause a use-after-free.
- When the last inode that was using an incompletely-removed master key
is evicted, the master key removal is completed by removing the key
struct from the keyring. Currently this is done via key_invalidate().
Yet, key_invalidate() takes the key semaphore. This can deadlock when
called from the shrinker, since in fscrypt_ioctl_add_key(), memory is
allocated with GFP_KERNEL under the same semaphore.
- More generally, the fact that the keyrings subsystem can arbitrarily
delay the destruction of keys (via garbage collection delay, or via
random processes getting temporary key references) is undesirable, as
it means we can't strictly guarantee that all secrets are ever wiped.
- Doing the master key lookups via the keyrings subsystem results in the
key_permission LSM hook being called. fscrypt doesn't want this, as
all access control for encrypted files is designed to happen via the
files themselves, like any other files. The workaround which SELinux
users are using is to change their SELinux policy to grant key search
access to all domains. This works, but it is an odd extra step that
shouldn't really have to be done.
The fix for all these issues is to change the implementation to what I
should have done originally: don't use the keyrings subsystem to keep
track of the filesystem's fscrypt_master_key structs. Instead, just
store them in a regular kernel data structure, and rework the reference
counting, locking, and lifetime accordingly. Retain support for
RCU-mode key lookups by using a hash table. Replace fscrypt_sb_free()
with fscrypt_sb_delete(), which releases the keys synchronously and runs
a bit earlier during unmount, so that block devices are still available.
A side effect of this patch is that neither the master keys themselves
nor the filesystem keyrings will be listed in /proc/keys anymore.
("Master key users" and the master key users keyrings will still be
listed.) However, this was mostly an implementation detail, and it was
intended just for debugging purposes. I don't know of anyone using it.
This patch does *not* change how "master key users" (->mk_users) works;
that still uses the keyrings subsystem. That is still needed for key
quotas, and changing that isn't necessary to solve the issues listed
above. If we decide to change that too, it would be a separate patch.
I've marked this as fixing the original commit that added the fscrypt
keyring, but as noted above the most important issue that this patch
fixes wasn't introduced until the addition of inline encryption support.
Based on the probed device type, piix4_add_adapters_sb800() or single
piix4_add_adapter() will be called.
For the former case, piix4_adapter_count is set as the number of adapters,
while for antoher case it is not set and kept default *zero*.
When piix4 is removed, piix4_remove() removes the adapters added in
piix4_probe(), basing on the piix4_adapter_count value.
Because the count is zero for the single adapter case, the adapter won't
be removed and makes the sources allocated for adapter leaked, such as
the i2c client and device.
These sources can still be accessed by i2c or bus and cause problems.
An easily reproduced case is that if a new adapter is registered, i2c
will get the leaked adapter and try to call smbus_algorithm, which was
already freed:
When thermnal zones are defined, trip points definitions are mandatory.
Define a couple of critical trip points for monitoring of existing
PMIC and SOC thermal zones.
This was lost between txt to yaml conversion and was re-enforced recently
via the commit 8c596324232d ("dt-bindings: thermal: Fix missing required property")
Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: devicetree@vger.kernel.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Fixes: f7b636a8d83c ("arm64: dts: juno: add thermal zones for scpi sensors") Link: https://lore.kernel.org/r/20221028140833.280091-8-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent changes to the thermal framework has made the trip
points (trips) for thermal zones compulsory, which made
the Ux500 DTS files break validation and also stopped
probing because of similar changes to the code.
Fix this by adding an "outer bounding box": battery thermal
zones should not get warmer than 70 degress, then we will
shut down.
That is because q->ma_ops is set to NULL before blk_release_queue is
called.
blk_mq_init_queue_data
blk_mq_init_allocated_queue
blk_mq_realloc_hw_ctxs
for (i = 0; i < set->nr_hw_queues; i++) {
old_hctx = xa_load(&q->hctx_table, i);
if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1]
if (!old_hctx)
break;
blk_put_queue
blk_release_queue
if (queue_is_mq(q)) [5]
blk_mq_release(q);
[1]: blk_mq_alloc_and_init_hctx failed at i != 0.
[2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and
will be cleaned up in blk_mq_release.
[3]: q->nr_hw_queues is 0.
[4]: Set q->mq_ops to NULL.
[5]: queue_is_mq returns false due to [4]. And blk_mq_release
will not be called. The hctxs in q->unused_hctx_list are leaked.
To fix it, call blk_release_queue in exception path.
Fixes: 2f8f1336a48b ("blk-mq: always free hctx after request queue is freed") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20221031031242.94107-1-chenjun102@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
So rq_qos_exit() is called to free the rq_wb memory for wbt_init().
However in the error path of device_add_disk(), only
blk_unregister_queue() is called and make rq_wb memory leaked.
UBLK_F_URING_CMD_COMP_IN_TASK needs to be set and returned to userspace
if ublk driver is built as module, otherwise userspace may get wrong
flags shown.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221029010432.598367-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
swiotlb_max_segment used to return either the maximum size that swiotlb
could bounce, or for Xen PV PAGE_SIZE even if swiotlb could bounce buffer
larger mappings. This made i915 on Xen PV work as it bypasses the
coherency aspect of the DMA API and can't cope with bounce buffering
and this avoided bounce buffering for the Xen/PV case.
So instead of adding this hack back, check for Xen/PV directly in i915
for the Xen case and otherwise use the proper DMA API helper to query
the maximum mapping size.
Replace swiotlb_max_segment() calls with dma_max_mapping_size().
In i915_gem_object_get_pages_internal() no longer consider max_segment
only if CONFIG_SWIOTLB is enabled. There can be other (iommu related)
causes of specific max segment sizes.
Fixes: a2daa27c0c61 ("swiotlb: simplify swiotlb_max_segment") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
[hch: added the Xen hack, rewrote the changelog] Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221020110308.1582518-1-hch@lst.de
(cherry picked from commit 78a07fe777c42800bd1adaec12abe5dcee43919e) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When switching to the generic fbdev infrastructure, it was missed that
framebuffers were created with the alloc_kmap parameter to
rockchip_gem_create_object() set to true. The generic infrastructure
calls this via the .dumb_create() driver operation and thus creates a
buffer without an associated kmap.
alloc_kmap only makes a difference on devices without an IOMMU, but when
it is missing rockchip_gem_prime_vmap() fails and the framebuffer cannot
be used.
Detect the case where a buffer is being allocated for the framebuffer
and ensure a kernel mapping is created in this case.
Fixes: 24af7c34b290 ("drm/rockchip: use generic fbdev setup") Reported-by: Johan Jonker <jbx6244@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221020181248.2497065-1-john@metanate.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When the avdd-0v9 or avdd-1v8 supply are not yet available, EPROBE_DEFER
is returned by rockchip_hdmi_parse_dt(). This causes the following error
message to be printed multiple times:
dwhdmi-rockchip fe0a0000.hdmi: [drm:dw_hdmi_rockchip_bind [rockchipdrm]] *ERROR* Unable to parse OF data
Fix that by not printing the message when rockchip_hdmi_parse_dt()
returns -EPROBE_DEFER.
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Per bindings/mmc/fsl-imx-esdhc.yaml, the clock order is ipg, ahb, per,
otherwise warning: "
mmc@5b020000: clock-names:1: 'ahb' was expected
mmc@5b020000: clock-names:2: 'per' was expected "
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
pgc_otg1 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1 power domain
to the usb phy node.
Fixes: ea2b5af58ab2 ("arm64: dts: imx8mn: put USB controller into power-domains") Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
pgc_otg1/2 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1/2 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1/2 power domain
to the usb phy node.
Fixes: 01df28d80859 ("arm64: dts: imx8mm: put USB controllers into power-domains") Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The GPIO signaling ctrl_sleep_moci is currently handled as a gpio hog.
But the gpio-hog node is made a child of the wrong gpio controller.
Move it to the node representing gpio4 so that it actually works.
Without this carrier board components jumpered to use the signal are
unconditionally switched off.
Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are few GPU clocks which are powering up the memories
and thus enable the FORCE_MEM_PERIPH always for these clocks
to force the periph_on signal to remain active during halt
state of the clock.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280") Fixes: 3e0f01d6c7e7 ("clk: qcom: Add graphics clock controller driver for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Link: https://lore.kernel.org/r/1666159535-6447-1-git-send-email-quic_c_skakit@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As serial communication requires a clean clock signal, the High Speed
Serial Communication Interfaces with FIFO (HSCIF) is clocked by a clock
that is not affected by Spread Spectrum or Fractional Multiplication.
Hence change the parent clocks for the HSCIF modules from the S0D3_PER
clock to the SASYNCPERD1 clock (which has the same clock rate), cfr.
R-Car V4H Hardware User's Manual rev. 0.54.
memblock_reserve() expects a physical address, but the address being
passed for the TPM final events log is what was returned from
early_memremap(). This results in something like the following:
Add custom I2C accessors to this driver, since the regular I2C regmap ones
do not generate the exact I2C transfers required by the chip. On I2C write,
it is mandatory to send transfer length first, on read the chip returns the
transfer length in first byte. Instead of always reading back 8 bytes, which
is the default and also the size of the entire register file, set BCP register
to 1 to read out 1 byte which is less wasteful.
Fixes: 892e0ddea1aa ("clk: rs9: Add Renesas 9-series PCIe clock generator driver") Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220929195521.284497-1-marex@denx.de Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
bio_put() with REQ_ALLOC_CACHE assumes that it's executed not from
an irq context. Let's add a warning if the invariant is not respected,
especially since there is a couple of places removing REQ_POLLED by hand
without also clearing REQ_ALLOC_CACHE.
Kingston SSDs do support NVMe Write_Zeroes cmd but take long time to
process. The firmware version is locked by these SSDs, we can not expect
firmware improvement, so disable Write_Zeroes cmd.
Signed-off-by: Xander Li <xander_li@kingston.com.tw> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
If mes is not dequeued during fini, mes will be in an uncleaned state
during reload, then mes couldn't receive some commands which leads to
reload failure.
[How]
Perform MES dequeue via MMIO after all the unmap jobs are done by mes
and before kiq fini.
v2: Move the dequeue operation inside kiq_hw_fini.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Clang's kernel Control Flow Integrity (kCFI) makes sure that all
indirect call targets have a type that exactly matches the function
pointer prototype. In this case, hqd_destroy()'s third parameter,
reset_type, should have a type of 'uint32_t' but every implementation of
this callback has a third parameter type of 'enum kfd_preempt_type'.
Update the function pointer prototype to match reality so that there is
no more CFI violation.
For asic with VF MMIO access protection avoid using CPU for VM table updates.
CPU pagetable updates have issues with HDP flush as VF MMIO access protection
blocks write to mmBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register
during sriov runtime.
v3: introduce virtualization capability flag AMDGPU_VF_MMIO_ACCESS_PROTECT
which indicates that VF MMIO write access is not allowed in sriov runtime
Signed-off-by: Danijel Slivka <danijel.slivka@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Userspace can currently write to sysfs to transition sdev_state to RUNNING
or OFFLINE from any source state. This causes issues because proper
transitioning out of some states involves steps besides just changing
sdev_state, so allowing userspace to change sdev_state regardless of the
source state can result in inconsistencies; e.g. with ISCSI we can end up
with sdev_state == SDEV_RUNNING while the device queue is quiesced. Any
task attempting I/O on the device will then hang, and in more recent
kernels, iscsid will hang as well.
More detail about this bug is provided in my first attempt:
We should not be completing requests from a task context that has already
undergone io_uring cancellations, i.e. __io_uring_cancel(), as there are
some assumptions, e.g. around cached task refs draining. Remove
iopolling from io_ring_ctx_wait_and_kill() as it can be called later
after PF_EXITING is set with the last task_work run.
Rather than busy looping, yield back to the scheduler and sleep for a
bit in the event that there's no data. This should hopefully prevent the
stalls that Mark reported:
<6>[ 3.362859] Freeing initrd memory: 16196K
<3>[ 23.160131] rcu: INFO: rcu_sched self-detected stall on CPU
<3>[ 23.166057] rcu: 0-....: (2099 ticks this GP) idle=03b4/1/0x40000002 softirq=28/28 fqs=1050
<4>[ 23.174895] (t=2101 jiffies g=-1147 q=2353 ncpus=4)
<4>[ 23.180203] CPU: 0 PID: 49 Comm: hwrng Not tainted 6.0.0 #1
<4>[ 23.186125] Hardware name: BCM2835
<4>[ 23.189837] PC is at bcm2835_rng_read+0x30/0x6c
<4>[ 23.194709] LR is at hwrng_fillfn+0x71/0xf4
<4>[ 23.199218] pc : [<c07ccdc8>] lr : [<c07cb841>] psr: 40000033
<4>[ 23.205840] sp : f093df70 ip : 00000000 fp : 00000000
<4>[ 23.211404] r10: c3c7e800 r9 : 00000000 r8 : c17e6b20
<4>[ 23.216968] r7 : c17e6b64 r6 : c18b0a74 r5 : c07ccd99 r4 : c3f171c0
<4>[ 23.223855] r3 : 000fffff r2 : 00000040 r1 : c3c7e800 r0 : c3f171c0
<4>[ 23.230743] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none
<4>[ 23.238426] Control: 50c5387d Table: 0020406a DAC: 00000051
<4>[ 23.244519] CPU: 0 PID: 49 Comm: hwrng Not tainted 6.0.0 #1
Link: https://lore.kernel.org/all/Y0QJLauamRnCDUef@sirena.org.uk/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change num_ghes from int to unsigned int, preventing an overflow
and causing subsequent vmalloc() to fail.
The overflow happens in ghes_estatus_pool_init() when calculating
len during execution of the statement below as both multiplication
operands here are signed int:
len += (num_ghes * GHES_ESOURCE_PREALLOC_MAX_SIZE);
The following call trace is observed because of this bug:
The state argument for the functions for obtaining various parts of the
state is NULL if it is called by drivers for active state. Fail graciously
in that case instead of dereferencing a NULL pointer.
Suggested-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/media/dvb-frontends/drxk_hard.c: In function 'drxk_read_ucblocks':
drivers/media/dvb-frontends/drxk_hard.c:6673:21: warning: 'err' may be used uninitialized [-Wmaybe-uninitialized]
6673 | *ucblocks = (u32) err;
| ^~~~~~~~~
drivers/media/dvb-frontends/drxk_hard.c:6663:13: note: 'err' was declared here
6663 | u16 err;
| ^~~
The local sd_fmt variable in rkisp1_capture_link_validate() has
uninitialized fields, which causes random failures when calling the
subdev .get_fmt() operation. Fix it by initializing the variable when
declaring it, which zeros all other fields.
projects / thirdparty / kernel / stable.git / log
