expr.c (array_ref_element_size): Force aligned_size back to sizetype.
* expr.c (array_ref_element_size): Force aligned_size back to
sizetype.
(component_ref_field_offset): Similarly for aligned_offset.
* tree.c (recompute_tree_invarant_for_addr_expr): Mark raw
low-bound, element-size, field-offset fields rather than
computed values.
* c-tree.h (struct language_function): Add arg_info element.
* c-decl.c (current_function_arg_info): New.
(grokdeclarator, store_parm_decls): Use it instead of
DECL_ARGUMENTS.
(c_push_function_context, c_pop_function_context): Save and
restore it.
Tobias Schlüter [Mon, 30 Aug 2004 19:08:41 +0000 (21:08 +0200)]
gfortran.h (gfc_namespace): Add new field is_block_data.
fortran/
* gfortran.h (gfc_namespace): Add new field is_block_data.
* parse.c (accept_statement): Remove special handling for BLOCK DATA.
(parse_block_data): Record BLOCK DATA name, set is_block_data field.
* trans.c (gfc_generate_code): Handle BLOCK DATA units.
* trans.h (gfc_generate_block_data): Add prototype.
* trans-decl.c (gfc_generate_block_data): New function.
testsuite/
* gfortran.dg/blockdata_1.f90: New test.
c-typeck.c (build_unary_op): Don't expand ADDR_EXPR of a COMPONENT_REF to pointer arithmetic.
* c-typeck.c (build_unary_op): Don't expand ADDR_EXPR of a
COMPONENT_REF to pointer arithmetic.
* varasm.c (initializer_constant_valid_p): Allow "&(*c).f", for
constant "c" as a valid constant initializer. Allow narrowing of
differences against the same base object, for any base object.
* config/mips/mips.c (MIPS_FP_CONDITIONS): New macro.
(mips_fp_condition): New enum.
(mips_fp_conditions): New array.
(print_fcc_operand): Delete.
(print_operand): Remove %V, %v and %Q. Redefine %Z so that it prints
the operand and comma if and only if ISA_HAS_8CC. Add %Y.
(builtin_description): Add "cond" field.
(DIRECT_BUILTIN): Initialize it.
(CMP_{SCALAR,PS,4S}_BUILTINS, MOVTF_BUILTINS): Split INSN parameter
into INSN and CODE. Initialize the "cond" field.
(CMP_BUILTINS): Update accordingly.
(mips_bdesc): Use MIPS_FP_CONDITIONS to invoke CMP_BUILTINS.
(mips_expand_builtin_movtf, mips_expand_builtin_compare): Take the
mips_fp_condition as argument. Make it the final operand of the
comparison instruction.
(mips_expand_builtin): Update accordingly.
* config/mips/mips.md (UNSPEC_C_*, UNSPEC_CABS_*): Delete.
(UNSPEC_C, UNSPEC_CABS): New constants. Shuffle others to fill
the gaps.
* config/mips/mips-ps-3d.md (mips_cond_move_tf_ps, bc1any[24][ft]):
Don't use the 'Q' operand prefix; just print the operand normally.
(mips_cabs_*, mips_c_*): Delete, replacing with...
(mips_c_cond_{ps,4s}, mips_cabs_cond_{s,d,ps,4s}): ...these new
patterns. Split the 4s versions into 2 ps patterns after reload.
fold-const.c (tree_expr_nonzero_p): Use get_base_address before assuming an ADDR_EXPR is non-null.
* fold-const.c (tree_expr_nonzero_p): Use get_base_address before
assuming an ADDR_EXPR is non-null.
cp/
* class.c (fixed_type_or_null): Use get_base_address before
assuming an ADDR_EXPR is non-null.
Anthony Green [Mon, 30 Aug 2004 15:43:03 +0000 (15:43 +0000)]
Makefile.am: Add frv support.
2004-08-30 Anthony Green <green@redhat.com>
* Makefile.am: Add frv support.
* Makefile.in, testsuite/Makefile.in: Rebuilt.
* configure.ac: Read configure.host.
* configure, aclocal.m4: Rebuilt.
* configure.host: New file. frv-elf needs libgloss.
* include/ffi.h.in: Force ffi_closure to have a nice big (8)
alignment. This is needed to frv and should harm the others.
* include/ffi_common.h (ALIGN_DOWN): New macro.
* src/frv/ffi.c, src/frv/ffitarget.h, src/frv/eabi.S: New files.
Paolo Bonzini [Mon, 30 Aug 2004 13:32:57 +0000 (13:32 +0000)]
Makefile.in (machname.h): Remove.
2004-08-30 Paolo Bonzini <bonzini@gnu.org>
* fixinc/Makefile.in (machname.h): Remove.
(fixincl.x): Do not pass $@ to genfixes.
* fixinc/genfixes: Remove code to produce machname.h.
* fixinc/fixincl.sh: Move it here instead.
* fixinc/fixlib.c: Do not conditionalize on MN_NAME_PAT's presence,
instead check if pz_mn_name_pat is NULL. Make mn_get_regexps
return a bool indicating whether pz_mn_name_pat is NULL.
* fixinc/fixlib.h: Do not conditionalize on MN_NAME_PAT's presence.
Declare extern C variables for the ENV_TABLE.
* fixinc/fixfixes.c: Do not conditionalize on MN_NAME_PAT's presence,
instead use the result of mn_get_regexps.
* fixinc/fixtests.c: Likewise.
Casey Marshall [Mon, 30 Aug 2004 13:06:48 +0000 (13:06 +0000)]
Author e-mail updated for all files.
2004-08-30 Casey Marshall <csm@gnu.org>
Author e-mail updated for all files.
* gnu/java/security/OID.java (equals): Test if the aurgment is an
instance of OID.
(compareTo): Use `equals'.
* gnu/java/security/der/BitString.java (equals): Test if the
argument is an instance of BitString.
* gnu/java/security/der/DERReader.java: Removed NIO imports. Made
class final. Made fields private.
(<init>): New constructor.
(skip): New method.
(makeString): Made static; don't use NIO.
(fromIso88591, fromUtf16Be, fromUtf8): New methods.
* gnu/java/security/der/DERWriter.java: Fixed imports.
(writeString): Don't use NIO.
(toIso88591, toUtf16Be, toUtf8): New methods.
* gnu/java/security/der/DERValue.java: Formatting changes only.
* gnu/java/security/der/DER.java: Likewise.
Paolo Carlini [Mon, 30 Aug 2004 11:33:54 +0000 (11:33 +0000)]
re PR libstdc++/17215 ([3.4 only] __basic_file<char>::close ignores errors)
2004-08-30 Paolo Carlini <pcarlini@suse.de>
Kenneth C. Schalk <ken@xorian.net>
PR libstdc++/17215
* config/io/basic_file_stdio.cc (__basic_file<char>::close()):
Check the return value of fclose/sync, loop on EINTR.
(__basic_file<char>::sys_open): Likewise, for sync.
Co-Authored-By: Kenneth C. Schalk <ken@xorian.net>
From-SVN: r86756
* config/mips/mips.md (UNSPEC_{RSQRT,RECIP}[12]_{S,D,PS}): Delete.
(UNSPEC_{RSQRT,RECIP}[12]): New constants.
(UNSPEC_MOVE_TF_PS): Renumber to avoid gaps.
* config/mips/mips-ps-3d.md (*movcc_v2sf_[sd]i): Use :GPR.
(mips_{rsqrt,recip}[12]_{s,d,ps}): Use :ANYF.
Richard Earnshaw [Sun, 29 Aug 2004 22:10:44 +0000 (22:10 +0000)]
flow.c (REVERSE_CONDEXEC_PREDICATES_P): Use the whole comparison, not just the codes, call reversed_comparison_code ().
* flow.c (REVERSE_CONDEXEC_PREDICATES_P): Use the whole comparison, not
just the codes, call reversed_comparison_code ().
(ior_reg_cond): Update arguments to REVERSE_CONDEXEC_PREDICATES_P.
(not_reg_cond): Use reversed_comparison_code.
(and_reg_cond): Likewise.
* ifcvt.c (cond_exec_process_if_block): Likewise.
* doc/tm.texi (REVERSE_CONDEXEC_PREDICATES_P): Update documentation.
Richard Earnshaw [Sun, 29 Aug 2004 21:07:37 +0000 (21:07 +0000)]
sched-deps.c (get_condition): Rewrite using jump support functions.
* sched-deps.c (get_condition): Rewrite using jump support functions.
Use reversed_comparison_code.
(conditions_mutex_p): Use reversed_comparison_code.
* config/mips/mips.h (mips_builtins, mips_cmp_choice): Delete.
(mips_function_type): Move to mips.c.
* config/mips/mips.c (mips_builtin_type): New enum.
(builtin_description): Replace code and ftype with builtin_type
and function_type.
(DIRECT_BUILTIN, CMP_SCALAR_BUILTINS, CMP_PS_BUILTINS, CMP_4S_BUILTINS)
(MOVTF_BUILTINS, CMP_BUILTINS): New macros.
(CODE_FOR_mips_abs_ps): Define.
(mips_bdesc): Use new macros.
(mips_expand_builtin): Use builtin_type. Update calls to subroutines.
(mips_init_builtins): Use the mips_bdesc[] index as the function code.
(mips_expand_builtin_direct): New function.
(mips_expand_builtin_movtf): Renamed from mips_expand_ps_cond_move_
builtin. Replace boolean parameter with builtin_type.
(mips_expand_compare_builtin, mips_expand_scalar_compare_builtin)
(mips_expand_4s_compare_builtin): Delete, replacing with...
(mips_expand_builtin_compare): ...this new function.
AbstractCollection.java, [...]: Added additional exceptions to documentation...
2004-08-29 Andrew John Hughes <gnu_andrew@member.fsf.org>
* java/util/AbstractCollection.java, java/util/AbstractList.java,
java/util/AbstractMap.java, java/util/AbstractSequentialList.java,
java/util/ArrayList.java, java/util/Arrays.java,
java/util/BitSet.java, java/util/Calendar.java,
java/util/Collection.java, java/util/ListIterator.java,
java/util/Map.java, java/util/SortedSet.java:
Added additional exceptions to documentation, along
with some additions and corrections.
* config/mips/mips.md (divide_condition): New mode attribute.
(div[sd]f3, *div[sd]f3): Use it. Redefine using :SCALARF.
(sqrt[sd]f3): Redefine using SCALARF.
(*recip[sd]f3, *rsqrt<mode>[ab]): Likewise. Name formerly unnamed
patterns.
* config/mips/mips.h (MIPS_CMP_MOVT, MIPS_CMP_MOVF): Delete.
* config/mips/mips.c (mips_prepare_builtin_arg): New function.
(mips_prepare_builtin_target): New function.
(mips_expand_builtin): Use them. Update calls to subroutines.
(mips_expand_ps_cond_move_builtin): Use the new functions. Replace
cmp_choice with a boolean argument to select between movt and movf.
Take the comparison's icode as an argument, not the function's fcode.
(mips_expand_compare_builtin): New function. Rename existing function
to mips_expand_scalar_compare_builtin.
(mips_expand_scalar_compare_builtin, mips_expand_4s_compare_builtin)
(mips_expand_ps_compare_builtin): Use the new functions. Take the
comparison's icode as an argument, not the builtin's fcode.
* config/mips/mips.c (print_operand): Remove '%Y' and '%y'.
(mips_expand_4s_compare_builtin): Redefine CCV4 to be 0 if all
registers are false and -1 if all registers are true.
(mips_expand_ps_compare_builtin): Likewise CCV2. Use subregs for
MIPS_CMP_UPPER and MIPS_CMP_LOWER.
* config/mips/mips.md (mips_cond_move_tf_ps): Use %Q rather than %y.
(bc1any4t, bc1any4f): Adjust for new CCV4 interpretation.
(bc1any2t, bc1any2f): Likewise CCV2.
(bc1upper2t, bc1lower2t, bc1upper2f, bc1lower2f): Delete.
* config/mips/mips.md (UNSPEC_MOVE_TF_PS): New.
* config/mips/mips-ps-3d.md (mips_cond_move_tf_ps): Express as an
UNSPEC rather than an IF_THEN_ELSE.
* config/mips/mips.c (mips_expand_ps_cond_move_builtin): Emit
mips_cond_move_tf_ps by name.
Chao-ying Fu [Sun, 29 Aug 2004 09:19:34 +0000 (09:19 +0000)]
mips-modes.def (V2SF, CCV2, CCV4): New modes.
2004-08-29 Chao-ying Fu <fu@mips.com>
James E Wilson <wilson@specifixinc.com>
* config/mips/mips-modes.def (V2SF, CCV2, CCV4): New modes. Give CCV2
8 byte size and alignment. Give CCV4 16 byte size and alignment.
* config/mips/mips-ps-3d.md: New file.
* config/mips/mips.c (TARGET_VECTOR_MODE_SUPPORTED_P,
TARGET_INIT_BUILTINS, TARGET_EXPAND_BUILTIN): Define.
(mips_const_insns): Handle CONST_VECTOR the same as CONST_DOUBLE.
(mips_output_move): Emit "mov.ps" for V2SFmode.
(mips_arg_info): Add checks for VECTOR_FLOAT_TYPE_P and
MODE_VECTOR_FLOAT.
(override_options): Check if TARGET_MIPS3D and there was an explicit
!TARGET_PAIRED_SINGLE_FLOAT. Set MASK_PAIRED_SINGLE, if TARGET_MIPS3D.
Check if TARGET_FLOAT64 and TARGET_HARD_FLOAT are both true, when
TARGET_PAIRED_SINGLE_FLOAT is true. Check if the ISA supports
TARGET_PAIRED_SINGLE_FLOAT. Allow MODE_VECTOR_FLOAT in fp registers,
and allow CCV2 and CCV4 to occupy two and four CC registers.
(print_fcc_operand): New function.
(print_operand): Add %Y, %y, %V, %v, %Q for CCV2, CCV4, CC. Modify
%Z to call print_fcc_operand.
(mips_function_value): Handle MODE_VECTOR_FLOAT.
(mips_class_max_nregs): Check for ST_REGS, and handle CCmodes.
(mips_vector_mode_supported_p): New function.
(mips_hard_regno_nregs): Check for ST_REG_P, and handle CCmodes.
(builtin_description): New struct.
(mips_bdesc): New array of struct builtin_description.
(mips_expand_builtin, mips_init_builtins,
mips_expand_ps_cond_move_builtin, mips_expand_4s_compare_builtin,
mips_expand_compare_builtin, mips_expand_ps_compare_builtin): New
functions.
* config/mips/mips.h (MASK_PAIRED_SINGLE, MASK_MIPS3D): New defines.
(TARGET_PAIRED_SINGLE_FLOAT, TARGET_MIPS3D): New defines.
(TARGET_CPU_CPP_BUILTINS): Add __mips_paired_single_float.
(TARGET_SWITCHES): Added "-mpaired-single", "-mno-paired-single",
"-mips3d", and "-mno-mips3d".
(ASM_SPEC): Map -mips3d to -mips3d in gas.
(EXTRA_CONSTRAINT_Y): New macro.
(EXTRA_CONSTRAINT_STR): Renamed from EXTRA_CONSTRAINT. Add new
multi-letter constraint 'Y'.
(CONSTRAINT_LEN): New macro.
(enum mips_builtins): New for MIPS builtin functions.
(enum mips_function_type): New for the types of MIPS builtin functions.
(enum mips_cmp_choice): New for the MIPS comparison builtin functions.
* config/mips/mips.md: New constants for paired single and MIPS-3D
instructions. Include the new mips-ps-3d.md file.
(addv2sf3, subv2sf3, mulv2sf3, absv2sf2, negv2sf2, movv2sf,
movv2sf_hardfloat_64bit): New named patterns.
(madd.ps, msub.ps, nmaddv2sf, nmaddv2sf_fastmath, nmsubv2sf,
nmsubv2sf_fastmath, ldxc1_v2sf_si, ldxc1_v2sf_di, sdxc1_v2sf_si,
sdxc1_v2sf_di): New unnamed patterns.
* config/mips/predicates.md (const_0_operand, const_1_operand): Add
const_vector support.
(const_0_or_1_operand): New predicate.
* doc/invoke.texi (MIPS Options): Add -mpaired-single and -mips3d.
Co-Authored-By: James E Wilson <wilson@specifixinc.com>
From-SVN: r86713
Paolo Carlini [Sun, 29 Aug 2004 09:04:33 +0000 (09:04 +0000)]
locale_facets.tcc (time_get<>::_M_extract_via_format, case 'S'): Allow for at least one leap-second (as per C99...
2004-08-29 Paolo Carlini <pcarlini@suse.de>
* include/bits/locale_facets.tcc (time_get<>::_M_extract_via_format,
case 'S'): Allow for at least one leap-second (as per C99, 7.23.1
and 7.23.3.5), two if !_GLIBCXX_USE_C99.
* testsuite/22_locale/time_get/get_time/char/4.cc: New.
* testsuite/22_locale/time_get/get_time/wchar_t/4.cc: Likewise.
* Makefile.in (OBJS-common): Add tree-ssa-propagate.o
(tree-ssa-propagate.o): New rule.
(GTFILES): Add tree-ssa-propagate.c.
* tree-flow.h (struct stmt_ann_d): Remove field
in_ccp_worklist.
* tree-ssa-propagate.c: New file.
* tree-ssa-propagate.h: New file.
* tree-ssa-ccp.c: Re-write to use the routines from
tree-ssa-propagate.c.
Ziemowit Laski [Sat, 28 Aug 2004 20:58:56 +0000 (20:58 +0000)]
c-common.h: Update comments about ObjC/ObjC++ entry points.
[gcc/ChangeLog]
2004-08-28 Ziemowit Laski <zlaski@apple.com>
* c-common.h: Update comments about ObjC/ObjC++ entry points.
(objc_is_reserved_word): New prototype.
(get_current_scope, objc_mark_locals_volatile): Move prototypes to
separate section; these are call-backs.
* c-lex.c (c_lex_with_flags): Call objc_is_reserved_word() to detect
ObjC/ObjC++ "@" keywords.
* c-tree.h (get_current_scope, objc_mark_locals_volatile): Remove
prototypes; they already live in c-common.h.
* stub-objc.c: Update copyright notice.
(objc_is_reserved_word): New stub.
[gcc/cp/ChangeLog]
2004-08-28 Ziemowit Laski <zlaski@apple.com>
* Make-lang.in (CXX_OBJS): Split up into CXX_OBJS and
CXX_AND_OBJCXX_OBJS.
(CXX_C_OBJS): Include in CXX_AND_OBJCXX_OBJS instead of listing
separately on the link line.
[gcc/objc/ChangeLog]
2004-08-28 Ziemowit Laski <zlaski@apple.com>
* objc-act.c (objc_is_reserved_word): New function.
Paul Brook [Sat, 28 Aug 2004 19:48:02 +0000 (19:48 +0000)]
re PR libfortran/17195 (Infinite loop in output_float in libgfortran/io/write.c)
PR libfortran/17195
* libgfortran.h (rtoa): Remove prototype.
* runtime/error.c (rtoa): Remove.
* io/write.c (calculate_G_format): Don't add blanks if E format is
used. Add correct number of blanks when exponent width is specified.
(output_float): Rewrite.
testsuite/
* gfortran.dg/edit_real_1.f90: New test.
Tobias Schlüter [Sat, 28 Aug 2004 14:07:03 +0000 (16:07 +0200)]
error.c (gfc_error_init_1): Remove blank line in front of function body.
* error.c (gfc_error_init_1): Remove blank line in front of
function body. Add missing blank.
(gfc_buffer_error, error_char, error_string): Remove blank line in
front of function body.
(show_locus): Add comma in comment.
(gfc_clear_warning, gfc_warning_check, gfc_clear_error,
gfc_push_error, gfc_pop_error): Remove blank line in front of
function body.
(gfc_get_errors): Typo fix in comment in front of function. Remove
blank line in front of function body.
Jason Merrill [Sat, 28 Aug 2004 02:33:54 +0000 (22:33 -0400)]
re PR c++/13684 (local static object variable constructed once but ctors and dtors called multiple times on same memory when called in multiple threads)
PR c++/13684
* cp/decl.c (expand_static_init): Use thread-safety API.
(register_dtor_fn): Return the call, don't expand it.
* cp/tree.c (add_stmt_to_compound): New fn.
(stabilize_call): Use it.
* gimplify.c (gimplify_cleanup_point_expr): Handle CLEANUP_EH_ONLY.
(gimple_push_cleanup): Add eh_only parm.
(gimplify_target_expr): Pass it.
* c.opt (-fno-threadsafe-statics): New option.
* c-opts.c (c_common_handle_option): Handle it.
* c-common.h (flag_threadsafe_statics): Declare it.
* c-common.c (flag_threadsafe_statics): Record it.
* doc/invoke.texi: Document it.
* tsystem.h (_GNU_SOURCE): Define.
* gthr-posix.h (__gthread_recursive_mutex_t): New typedef.
(__GTHREAD_RECURSIVE_MUTEX_INIT): New macro.
(__GTHREAD_RECURSIVE_MUTEX_INIT_FUNCTION): New macro.
(__gthread_recursive_mutex_init_function): New fn.
(__gthread_recursive_mutex_lock): New fn.
(__gthread_recursive_mutex_trylock): New fn.
(__gthread_recursive_mutex_unlock): New fn.
* gthr-solaris.h, gthr-single.h, gthr-dce.h: Likewise.
* gthr-win32.h, gthr-vxworks.h: Likewise.
* gthr.h: Document.
* libsupc++/guard.cc (static_mutex): Internal class implementing a
recursive mutex which controls initialization of local statics.
(__gnu_cxx::recursive_init): New exception class.
(__cxa_guard_acquire): Deal with locking and recursion detection.
(acquire_1, __cxa_guard_abort, __cxa_guard_release): Likewise.
Hans Boehm [Sat, 28 Aug 2004 00:45:56 +0000 (00:45 +0000)]
configure.ac: Handle --enable-gc-debug.
* configure.ac: Handle --enable-gc-debug.
* configure: Regenerate.
* include/config.h.in (LIBGCJ_GC_DEBUG): Add.
* boehm.cc: Include gc_mark.h, javaxfc.h, but no GC private files.
Rearrange include file order.
(GC_DEBUG): Set if LIBGCJ_GC_DEBUG is set.
(GC_finalize_all, GC_debug_generic_malloc): Don't declare.
(disable_gc_mutex): Delete along with all references.
(_Jv_MarkObj, _Jv_MarkArray): Use public types,
adjust for debug header size.
(_Jv_AllocObj, _Jv_allocPtrFreeObj): Define out of line for
debug case.
(_Jv_AllocArray): Declare min_heap_addr only if needed.
(gcj_describe_type_fn): New.
(_Jv_InitGC): Use GC_new_free_list, GC_new_proc, and GC_new_kind.
Register gcj_describe_type_fn.
* include/boehm-gc.h:
(_Jv_AllocObj, _Jv_allocPtrFreeObj):
Don't define, but declare, for debug case.
* java/lang/natObject.cc:
(GC_DEBUG): Define if LIBGCJ_GC_DEBUG is set.
* cp-tree.def (OFFSETOF_EXPR): New.
* parser.c (cp_parser_builtin_offsetof): Either built an
OFFSETOF_EXPR, or call fold_offsetof immediately.
* pt.c (tsubst_expr): Handle OFFSETOF_EXPR.
Matthias Klose [Fri, 27 Aug 2004 19:58:15 +0000 (19:58 +0000)]
baseline_symbols.txt: New.
2004-08-27 Matthias Klose <doko@debian.org>
* config/abi/arm-linux-gnu/baseline_symbols.txt: New.
* config/abi/mips-linux-gnu/baseline_symbols.txt: Update to 3.4.0.
* configure.host: Set abi_baseline_pair for arm*-*-linux* and
mips*-*-linux*.
David Edelsohn [Fri, 27 Aug 2004 18:29:52 +0000 (18:29 +0000)]
rs6000.c (rs6000_override_options): Increase maximum skip to 15.
* config/rs6000/rs6000.c (rs6000_override_options): Increase
maximum skip to 15. Set function alignment, jump alignment, and
loop alignment to 16 for processors that form dispatch groups.
(rs6000_rtx_costs): Outer code is used.
* rtl.h (read_rtx): Change prototype.
* read-rtl.c (read_rtx): Provide the caller with both an rtx and a
line number. Return true on success.
* gensupport.c (process_include, init_md_reader_args_cb): Adjust
callers accordingly.