Richard Mudgett [Thu, 1 Oct 2009 19:48:58 +0000 (19:48 +0000)]
Prevent deadlock if chan_dahdi attempts to change PRI channel names.
The PRI channels can no longer change the channel name if a different B
channel is selected during call negotiation. To prevent using the channel
name to infer what B channel a call is using and to avoid name collisions,
the channel name format is changed.
The new channel naming for PRI channels is:
DAHDI/ISDN-<span>-<sequence-number>
Remove ability to control T.38 FAX error correction from udptl.conf.
chan_sip has had the ability to control T.38 FAX error correction mode on a per-peer
(or global) basis for a couple of releases now, which is where it should have been
all along. This patch removes the ability to configure it in udptl.conf, but issues
a warning if the user tries to do, telling them to look at sip.conf.sample for how
to configure it now. For any SIP peers that are T.38 enabled in sip.conf, there is
already a default for FEC error correction even if the user does not specify any mode,
so this change will not turn off error correction by default, it will have the same
default value that has been in the udptl.conf sample file.
Fix SRV lookup and Request-URI generation in chan_sip.
This patch adds a new field "portinuri" to the sip dialog struct and the sip peer struct. That field is used during RURI generation to determine if the port should be included in the RURI. It is also used in some places to determine if an SRV lookup should occur.
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Allow locks to be inherited through a masquerade without causing starvation.
(closes issue #14859)
Reported by: atis
Patches:
20090821__issue14859.diff.txt uploaded by tilghman (license 14)
20090925__issue14859__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: atis, tilghman
Mark Michelson [Tue, 29 Sep 2009 21:28:04 +0000 (21:28 +0000)]
Fix channel reference leak.
ast_cel_report_event would geet a reference to the
bridged channel. However, certain return paths, such
as if CEL was not enabled, would result in a reference
leak. All return paths now properly unref the channel.
Reduce CPU usage related to building a peer merely for devicestates.
This fixes a 100% CPU problem in the SIP driver, found by profiling
the driver while the problem was occurring.
(closes issue #14309)
Reported by: pkempgen
Patches:
20090924__issue14309.diff.txt uploaded by tilghman (license 14)
Tested by: pkempgen, vrban
........
Jeff Peeler [Tue, 29 Sep 2009 16:58:29 +0000 (16:58 +0000)]
Make deletion of temporary greetings work properly with IMAP_STORAGE
When imapgreetings was set to yes, the message was being deleted but wasn't
actually being expunged. When imapgreetings was set to no, the file based
message was not being deleted at all. All good now!
(closes issue #14949)
Reported by: noahisaac
Patches:
vm_tempgreeting_removal.patch uploaded by noahisaac (license 748),
modified by me
When selecting DONT_OPTIMIZE in menuselect, explicitly pass -O0 to the compiler
so we override any default optimization levels for a particular install.
........
Jeff Peeler [Mon, 28 Sep 2009 19:10:10 +0000 (19:10 +0000)]
Fix building of registration entry in build_peer when using callbackextension
Check for remotesecret option was unintentionally always true, which therefore
caused the secret option to never be used. Thanks to dvossel for pointing out
the exact fix.
Kevin P. Fleming [Fri, 25 Sep 2009 14:38:41 +0000 (14:38 +0000)]
Don't use hash-based lookups for ast_channel_get_by_name_prefix().
ast_channel_get_full() tries to use OBJ_POINTER to optimize name-based
channel lookups, but this will not work properly when the channel's full
name was not supplied; for name-prefix searches, there is no value in
doing a hash-based lookup, and in fact doing so could result in many
channels being skipped.
Philippe Sultan [Fri, 25 Sep 2009 10:54:42 +0000 (10:54 +0000)]
Add JABBER_RECEIVE as a dialplan function, implement SendText in Jingle channels
JABBER_RECEIVE (along with JabberSend) makes Asterisk interact with users over
XMPP to process calls.
SendText can be used instead of JabberSend in the context of XMPP based voice
channels (chan_gtalk and chan_jingle).
Jeff Peeler [Thu, 24 Sep 2009 20:29:51 +0000 (20:29 +0000)]
Add bridge related dial flags to the bridge app
Most of the functionality here is gained simply by setting the feature flag
on the bridge config. However, the dial limit functionality has been moved from
app_dial to the features code and has been made public so both app_dial and
the bridge app can use it.
(closes issue #13165)
Reported by: tim_ringenbach
Patches:
app_bridge_options_r138998.diff uploaded by tim ringenbach (license 540),
modified by me
Implicitly sending a progress signal breaks some applications.
Call Progress() in your dialplan if you explicitly want progress to be sent.
(Reverts change 216430, closes issue #15957)
Reported by: Pavel Troller on the Asterisk-Dev mailing list
http://lists.digium.com/pipermail/asterisk-dev/2009-September/039897.html
........
Fix two possible crashes, one only in 1.6.1 and one in 1.6.1 forward.
(closes issue #15739)
Reported by: DLNoah, jeffg
Patches:
20090914__issue15739.diff.txt uploaded by tilghman (license 14)
20090922__issue15739.diff.txt uploaded by tilghman (license 14)
Tested by: DLNoah, jeffg
Add support for 'setvar=' for MGCP device lines, like other channel drivers provide.
(closes issue #14818)
Reported by: alea-soluciones
Patches:
chan_mgcp-setvars-svn-trunk-r219899.patch uploaded by alea (license 514)
Update fax number to the legal fax, not the generic fax.
(closes issue #15946)
Reported by: jtodd
Patches:
leif-is-a-wuss.txt uploaded by jtodd (license 870)
Tested by: jparker, tilghman, jtodd, russellb, mmichelson, seanbright, kpfleming, and the rest of the usual suspects
This commit adds the doxygen changes that I've made to describe the Mantis
work flow documentation for the open source issue tracker. This should make
it easier to determine the flow of issues through the issue tracker, and what
those statuses mean.
When IMAP variables were changed during a reload, Voicemail did not use the new values.
This change introduces a configuration version variable, which ensures that
connections with the old values are not reused but are allowed to expire
normally.
(closes issue #15934)
Reported by: viniciusfontes
Patches:
20090922__issue15934.diff.txt uploaded by tilghman (license 14)
Tested by: viniciusfontes
........
The iax frame's retrans sched id was written over right
before iax2_frame_free was called. In iax2_frame_free that
retrans id is used to delete the sched item. By writing over
the retrans field before the sched item could be deleted, it was
possible for a retransmit to occur on a freed frame.
........
via-header branches not updated correctly on INVITE
INVITE requests must always contain a new unique branch id. When
a new branch id is created for an INVITE, the dialog's invite_branch
variable must be updated so CANCEL requests use the correct branch id.
Missing value setting line for maxsecs/maxmessage
(closes issue #15696)
Reported by: fhackenberger
Patches:
maxsecs.patch uploaded by fhackenberger (license 592)
This patch cleans up the locking logic in chan_sip.c's
handle_invite_replaces() function as well as making use
of ast_do_masquerade() rather than forcing the masquerade
on an ast_read(). The code had several redundant unlocks
that would result in 'freed more times than we've locked!'
errors. I cleaned these up as well as moving all the unlock
logic to the end of the function. This patch should also
resolve the issue people were having with the replacecall
channel never being unlocked with one legged calls.
Prevent a potential race condition and crash when hanging up a channel by removing the channel from the channel list before begining channel tear down.
This fix may potentially cause problems with CDR backends that access the channel a CDR is associated with via the channel list. This fix makes the channel unavabile at the time when the CDR backend is invoked. This has been documented in include/asterisk/cdr.h.
Add the 'E' option to exit ChanSpy, once the single channel it spied upon hangs up.
In addition, there's a bit of cleanup to the arguments and documentation, in which
I discovered that the last feature added to this application duplicated an option
(oops!) and changed that option so that it now works.
(closes issue #14909)
Reported by: junky
Patches:
__20090901-spy_hangup_trunk.diff uploaded by lmadsen (license 10)
Tested by: amilcar, junky, flujan, lmadsen
Detect whether we actually have the long double type, before looking for those functions.
(closes issue #15017)
Reported by: tzafrir
Patches:
20090916__issue15017.diff.txt uploaded by tilghman (license 14)
Tested by: tzafrir
Fixes CID pattern matching behavior to mirror that of extension pattern matching.
Pattern matching for extensions uses a type of scoring system, giving values for
specificity to each character in the pattern. Unfortunately, this is done character
by character, in order. This does lead to some less specific patterns being first
in line for matching, but it will usually get the job done.
This patch merely brings CID matching to the same level as extension matching.
This patch does not attempt to tackle the problem shared by extension matching.
The firmware can now be found on downloads.digium.com, where the rest of our
binary downloads live. This was the last part of our Asterisk tarballs that
was considered non-free by Debian. :-)
If the user enters the same password as before, don't signal an error when the change does nothing.
(closes issue #15492)
Reported by: cbbs70a
Patches:
20090713__issue15492.diff.txt uploaded by tilghman (license 14)
........
Ensure FollowMe sets language in channels it creates.
Also, not in the original bug report, but related fields are accountcode and
musicclass, and the inheritance of datastores.
(closes issue #15372)
Reported by: Romik
Patches:
20090828__issue15372.diff.txt uploaded by tilghman (license 14)
Tested by: cervajs
........
Fix handling of DAHDI_EVENT_REMOVED event to prevent crash in do_monitor.
After talking to rmudgett about some of his recent iflist locking changes, it
was determined that the only place that would destroy a channel without being
explicitly to do so was in handle_init_event. The loop to walk the interface
list has been modified to wait to destroy the channel until the dahdi_pvt of
the channel to be destroyed is no longer needed.
Make calltoken support work with realtime users and peers.
In the course of this, I also found that the results of ast_gethostbyname
were being used incorrectly in both chan_iax2 and chan_sip, so both have
been fixed.
Richard Mudgett [Thu, 10 Sep 2009 22:31:12 +0000 (22:31 +0000)]
Cleaned up chan_dahdi iflist handling and locking.
* Fixed walking the iflist so it is always done with the iflock locked.
* Simplified iflist walking routines.
* Created chan_dahdi iflist insertion and extraction routines.
* Fixed duplicate_pseudo() malloc fail handling.
* Fixed infinite loop in action_dahdishowchannels() when showing a single channel.
The IAX2 Call Token security patch inadvertently broke the use of
encryption due to the reorganization of code in the socket_process()
function. When encryption is used, an incoming full frame must first
be decrypted before the information elements can be parsed. The
security release mistakenly moved IE parsing before decryption in
order to process the new Call Token IE. To resolve this, decryption
of full frames is once again done before looking into the frame. This
involves searching for an existing callno, checking the pvt to see if
encryption is turned on, and decrypting the packet before the internal
fields of the full frame are accessed.
projects / thirdparty / asterisk.git / log
