The timer instance per queue is exclusive, and snd_seq_timer_open()
should have managed the concurrent accesses. It looks as if it's
checking the already existing timer instance at the beginning, but
it's not right, because there is no protection, hence any later
concurrent call of snd_seq_timer_open() may override the timer
instance easily. This may result in UAF, as the leftover timer
instance can keep running while the queue itself gets closed, as
spotted by syzkaller recently.
For avoiding the race, add a proper check at the assignment of
tmr->timeri again, and return -EBUSY if it's been already registered.
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the
SPI core's behavior if the ->setup() hook returns an error upon adding
an spi_device: Before, the ->cleanup() hook was invoked to free any
allocations that were made by ->setup(). With the commit, that's no
longer the case, so the ->setup() hook is expected to free the
allocations itself.
I've identified 5 drivers which depend on the old behavior and am fixing
them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c spi-pxa2xx.c
Importantly, ->setup() is not only invoked on spi_device *addition*:
It may subsequently be called to *change* SPI parameters. If changing
these SPI parameters fails, freeing memory allocations would be wrong.
That should only be done if the spi_device is finally destroyed.
I am therefore using a bool "initial_setup" in 4 of the affected drivers
to differentiate between the invocation on *adding* the spi_device and
any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c
In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device
addition, not any subsequent calls. It therefore doesn't need the bool.
It's worth noting that 5 other drivers already perform a cleanup if the
->setup() hook fails. Before c7299fea6769, they caused a double-free
if ->setup() failed on spi_device addition. Since the commit, they're
fine. These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c
spi-st-ssc4.c spi-tegra114.c
(spi-pxa2xx.c also already performs a cleanup, but only in one of
several error paths.)
When a spi device is unregistered and triggers a driver unbind, the
driver might need to access the spi device. So, don't have the
controller clean up the spi device before the driver is unbound. Clean
up the spi device after the driver is unbound.
Fixes: c7299fea6769 ("spi: Fix spi device unregister flow") Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210505164734.175546-1-saravanak@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Controller teardown flow may take some time in case it has many I/O
queues, and the host may not send us keep-alive during this period.
Hence reset the traffic based keep-alive timer so we don't trigger
a controller teardown as a result of a keep-alive expiration.
Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The third parameter of module_param() is permissions for the sysfs node
but it looks like it is being used as the initial value of the parameter
here. In fact, false here equates to omitting the file from sysfs and
does not affect the value of require_signatures.
Making the parameter writable is not simple because going from
false->true is fine but it should not be possible to remove the
requirement to verify a signature. But it can be useful to inspect the
value of this parameter from userspace, so change the permissions to
make a read-only file in sysfs.
Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When update the latest mainline kernel with the above two configs (1)
and (2), the kernel starts normally, but it still hangs when execute
the following command:
Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs
disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences
with function_graph tracer at the first glance.
I use ejtag to find out the epc address is related with preempt_enable()
in the file arch/mips/lib/mips-atomic.c, because function tracing can
trace the preempt_{enable,disable} calls that are traced, replace them
with preempt_{enable,disable}_notrace to prevent function tracing from
going into an infinite loop, and then it can fix the kernel hang issue.
By the way, it seems that this commit is a complement and improvement of
commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing
is enabled").
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Also enable phy errata workaround on 9567 since has the same errata as
the 9477 according to the manufacture's documentation.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.
We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.
Changed in v2:
- Use netif_running instead of its own flag
Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.
TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.
WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:
irqs allocated with devm_request_irq() should not be freed using
free_irq(). Doing so causes a dangling pointer and a subsequent double
free.
Link: https://lore.kernel.org/r/20210519130519.2661938-1-yangyingliang@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some commands (such as INQUIRY) may return less data than the initiator
requested. To avoid conducting useless information, set the right residual
count to make upper layer aware of this.
SFC driver can be configured via modparam to work using MSI-X, MSI or
legacy IRQ interrupts. In the last one, the interrupt was not properly
released on module remove.
It was not freed because the flag irqs_hooked was not set during
initialization in the case of using legacy IRQ.
Example of (trimmed) trace during module remove without this fix:
When TCP is used as transport and a program on the
system connects to RDS port 16385, connection is
accepted but denied per the rules of RDS. However,
RDS connections object is left in the list. Next
loopback connection will select that connection
object as it is at the head of list. The connection
attempt will hang as the connection object is set
to connect over TCP which is not allowed
The issue can be reproduced easily, use rds-ping
to ping a local IP address. After that use any
program like ncat to connect to the same IP
address and port 16385. This will hang so ctrl-c out.
Now try rds-ping, it will hang.
To fix the issue this patch adds checks to disallow
the connection object creation and destroys the
connection object.
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then
once this VCPU resumes it will see the new jiffies value, while it
may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this
VCPU and updates all the watchdogs via pvclock_touch_watchdogs().
There is a small chance of misreported WQ stalls in the meantime,
because new jiffies is time_after() old 'ts + thresh'.
Save jiffies at the beginning of this function and use that value
for stall detection. If VM gets suspended then we continue using
"old" jiffies value and old WQ touch timestamps. If IRQ at some
point restarts the stall detection cycle (pvclock_touch_watchdogs())
then old jiffies will always be before new 'ts + thresh'.
This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix
too early usage of static_branch_disable()"). The commit 6041186a3258
("init: initialize jump labels before command line option parsing") has
moved the jump_label_init() before parse_args() which has made the
commit a3e72739b7a7 unnecessary. On the other hand there are
consequences of disabling the controllers later as there are subsystems
doing the controller checks for different decisions. One such incident
is reported [1] regarding the memory controller and its impact on memory
reclaim code.
We spotted a bug recently during a review where a driver was
unregistering a bus that wasn't registered, which would trigger this
BUG_ON(). Let's handle that situation more gracefully, and just print
a warning and return.
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzbot reports that in mac80211 we have a potential deadlock
between our "local->stop_queue_reasons_lock" (spinlock) and
netlink's nl_table_lock (rwlock). This is because there's at
least one situation in which we might try to send a netlink
message with this spinlock held while it is also possible to
take the spinlock from a hardirq context, resulting in the
following deadlock scenario reported by lockdep:
This seems valid, we can take the queue_stop_reason_lock in
any kind of context ("CPU0"), and call ieee80211_report_ack_skb()
with the spinlock held and IRQs disabled ("CPU1") in some
code path (ieee80211_do_stop() via ieee80211_free_txskb()).
Short of disallowing netlink use in scenarios like these
(which would be rather complex in mac80211's case due to
the deep callchain), it seems the only fix for this is to
disable IRQs while nl_table_lock is held to avoid hitting
this scenario, this disallows the "CPU0" portion of the
reported deadlock.
Note that the writer side (netlink_table_grab()) already
disables IRQs for this lock.
Unfortunately though, this seems like a huge hammer, and
maybe the whole netlink table locking should be reworked.
Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail,
then we call kobject_put() on the slave->kobj. This in turn calls
the release function slave_kobj_release() which will always try to
cancel_delayed_work_sync(&slave->notify_work), which shouldn't be
done on an uninitialized work struct.
Always initialize the work struct earlier to avoid problems here.
Syzbot bisected this down to a completely pointless commit, some
fault injection may have been at work here that caused the alloc
failure in the first place, which may interact badly with bisect.
Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
'nj_setup' in netjet.c might fail with -EIO and in this case
'card->irq' is initialized and is bigger than zero. A subsequent call to
'nj_release' will free the irq that has not been requested.
Fix this bug by deleting the previous assignment to 'card->irq' and just
keep the assignment before 'request_irq'.
Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Chipidea also need sync interrupt before unbind the udc while
gadget remove driver, otherwise setup irq handling may happen
while unbind, see below dump generated from android function
switch stress test:
MODULE_DEVICE_TABLE is used to extract the device information out of the
driver and builds a table when being compiled. If using this macro,
kernel can find the driver if available when the device is plugged in,
and then loads that driver and initializes the device.
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Today, the stacked call to vfio_ccw_sch_io_todo() does three things:
1) Update a solicited IRB with CP information, and release the CP
if the interrupt was the end of a START operation.
2) Copy the IRB data into the io_region, under the protection of
the io_mutex
3) Reset the vfio-ccw FSM state to IDLE to acknowledge that
vfio-ccw can accept more work.
The trouble is that step 3 is (A) invoked for both solicited and
unsolicited interrupts, and (B) sitting after the mutex for step 2.
This second piece becomes a problem if it processes an interrupt
for a CLEAR SUBCHANNEL while another thread initiates a START,
thus allowing the CP and FSM states to get out of sync. That is:
CPU 1 CPU 2
fsm_do_clear()
fsm_irq()
fsm_io_request()
vfio_ccw_sch_io_todo()
fsm_io_helper()
Since the FSM state and CP should be kept in sync, let's make a
note when the CP is released, and rely on that as an indication
that the FSM should also be reset at the end of this routine and
open up the device for more work.
When an I/O request is made, the fsm_io_request() routine
moves the FSM state from IDLE to CP_PROCESSING, and then
fsm_io_helper() moves it to CP_PENDING if the START SUBCHANNEL
received a cc0. Yet, the error case to go from CP_PROCESSING
back to IDLE is done after the FSM call returns.
Let's move this up into the FSM proper, to provide some
better symmetry when unwinding in this case.
The Lenovo Miix 3-830 tablet has only 1 speaker, has an internal analog
mic on IN1 and uses JD2 for jack-detect, add a quirk to automatically
apply these settings on Lenovo Miix 3-830 tablets.
Add a quirk for the Glavey TM800A550L tablet, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210508150146.28403-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable().
Signed-off-by: Jeimon <jjjinmeng.zhou@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
We can't currently allow to attach functions with variable arguments.
The problem is that we should save all the registers for arguments,
which is probably doable, but if caller uses more than 6 arguments,
we need stack data, which will be wrong, because of the extra stack
frame we do in bpf trampoline, so we could crash.
Also currently there's malformed trampoline code generated for such
functions at the moment as described in:
When an SPI device is unregistered, the spi->controller->cleanup() is
called in the device's release callback. That's wrong for a couple of
reasons:
1. spi_dev_put() can be called before spi_add_device() is called. And
it's spi_add_device() that calls spi_setup(). This will cause clean()
to get called without the spi device ever being setup.
2. There's no guarantee that the controller's driver would be present by
the time the spi device's release function gets called.
3. It also causes "sleeping in atomic context" stack dump[1] when device
link deletion code does a put_device() on the spi device.
Fix these issues by simply moving the cleanup from the device release
callback to the actual spi_unregister_device() function.
p = subprocess.Popen(["aplay -t raw -D plughw:1,0 /dev/zero"], shell=True)
subprocess.call(["arecord -Dhw:1,0 --dump-hw-params"], shell=True)
subprocess.call(["arecord -Dhw:1,0 -fdat -d1 /dev/null"], shell=True)
p.kill()
Handling ACP global external interrupt enable register
causing this issue.
This register got updated wrongly when there is active
stream causing interrupts disabled for active stream.
Refactored code to handle enabling and disabling external interrupts.
The ni1/ni2 ratio formula [1] uses the pclk which is the prescaled mclk.
The max98088 datasheet [2] has no such formula but table-12 equals so
we can assume that it is the same for both devices.
Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
tried to make sure that there could not be a confusion between the opener of
a /proc/$pid/attr/ file and the writer. It used struct cred to make sure
the privileges didn't change. However, there were existing cases where a more
privileged thread was passing the opened fd to a differently privileged thread
(during container setup). Instead, use mm_struct to track whether the opener
and writer are still the same process. (This is what several other proc files
already do, though for different reasons.)
Reported-by: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: Andrea Righi <andrea.righi@canonical.com> Tested-by: Andrea Righi <andrea.righi@canonical.com> Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to
fill up the neighbour table with enough entries that it will overflow for
valid connections after that.
This behaviour is more prevalent after commit 58956317c8de ("neighbor:
Improve garbage collection") is applied, as it prevents removal from
entries that are not NUD_FAILED, unless they are more than 5s old.
Fixes: 58956317c8de (neighbor: Improve garbage collection) Reported-by: Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do this in order to prevent the task from being freed if the thread
returns (which can be triggered by the frontend) before the call to
kthread_stop done as part of the backend tear down. Not taking the
reference will lead to a use-after-free in that scenario. Such
reference was taken before but dropped as part of the rework done in 2ac061ce97f4.
Reintroduce the reference taking and add a comment this time
explaining why it's needed.
Mark bus as suspended during system suspend to block the future
transfers. Implement geni_i2c_resume_noirq() to resume the bus.
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LZ4 final literal copy could be overlapped when doing
in-place decompression, so it's unsafe to just use memcpy()
on an optimized memcpy approach but memmove() instead.
Upstream LZ4 has updated this years ago [1] (and the impact
is non-sensible [2] plus only a few bytes remain), this commit
just synchronizes LZ4 upstream code to the kernel side as well.
It can be observed as EROFS in-place decompression failure
on specific files when X86_FEATURE_ERMS is unsupported,
memcpy() optimization of commit 59daa706fbec ("x86, mem:
Optimize memcpy by avoiding memory false dependece") will
be enabled then.
Currently most modern x86-CPUs support ERMS, these CPUs just
use "rep movsb" approach so no problem at all. However, it can
still be verified with forcely disabling ERMS feature...
We didn't observe any strange on arm64/arm/x86 platform before
since most memcpy() would behave in an increasing address order
("copy upwards" [3]) and it's the correct order of in-place
decompression but it really needs an update to memmove() for sure
considering it's an undefined behavior according to the standard
and some unique optimization already exists in the kernel.
Crash shutdown handler only disables kvmclock and steal time, other PV
features remain active so we risk corrupting memory or getting some
side-effects in kdump kernel. Move crash handler to kvm.c and unify
with CPU offline.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210414123544.1060604-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currenly, we disable kvmclock from machine_shutdown() hook and this
only happens for boot CPU. We need to disable it for all CPUs to
guard against memory corruption e.g. on restore from hibernate.
Note, writing '0' to kvmclock MSR doesn't clear memory location, it
just prevents hypervisor from updating the location so for the short
while after write and while CPU is still alive, the clock remains usable
and correct so we don't need to switch to some other clocksource.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210414123544.1060604-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Various PV features (Async PF, PV EOI, steal time) work through memory
shared with hypervisor and when we restore from hibernation we must
properly teardown all these features to make sure hypervisor doesn't
write to stale locations after we jump to the previously hibernated kernel
(which can try to place anything there). For secondary CPUs the job is
already done by kvm_cpu_down_prepare(), register syscore ops to do
the same for boot CPU.
Krzysztof:
This fixes memory corruption visible after second resume from
hibernation:
Commit 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on
reset") flipped the register number to 0 for all the debug registers
in the sysreg table, hereby indicating that these registers live
in a separate shadow structure.
However, the author of this patch failed to realise that all the
accessors are using that particular index instead of the register
encoding, resulting in all the registers hitting index 0. Not quite
a valid implementation of the architecture...
Address the issue by fixing all the accessors to use the CRm field
of the encoding, which contains the debug register index.
Fixes: 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on reset") Reported-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop bits 63:32 on loads/stores to/from DRs and CRs when the vCPU is not
in 64-bit mode. The APM states bits 63:32 are dropped for both DRs and
CRs:
In 64-bit mode, the operand size is fixed at 64 bits without the need
for a REX prefix. In non-64-bit mode, the operand size is fixed at 32
bits and the upper 32 bits of the destination are forced to 0.
The following test case reproduces an issue of wrongly freeing in-use
blocks on the readonly seed device when fstrim is called on the rw sprout
device. As shown below.
Create a seed device and add a sprout device to it:
$ mkfs.btrfs -fq -dsingle -msingle /dev/loop0
$ btrfstune -S 1 /dev/loop0
$ mount /dev/loop0 /btrfs
$ btrfs dev add -f /dev/loop1 /btrfs
BTRFS info (device loop0): relocating block group 290455552 flags system
BTRFS info (device loop0): relocating block group 1048576 flags system
BTRFS info (device loop0): disk added /dev/loop1
$ umount /btrfs
Mount the sprout device and run fstrim:
$ mount /dev/loop1 /btrfs
$ fstrim /btrfs
$ umount /btrfs
Now try to mount the seed device, and it fails:
$ mount /dev/loop0 /btrfs
mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
Block 5292032 is missing on the readonly seed device:
Currently DPU driver scales bandwidth and core clock for sc7180 only,
while the rest of chips get static bandwidth votes. Make all chipsets
scale bandwidth and clock per composition requirements like sc7180 does.
Drop old voting path completely.
The userfaultfd hugetlb tests cause a resv_huge_pages underflow. This
happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on
an index for which we already have a page in the cache. When this
happens, we allocate a second page, double consuming the reservation,
and then fail to insert the page into the cache and return -EEXIST.
To fix this, we first check if there is a page in the cache which
already consumed the reservation, and return -EEXIST immediately if so.
There is still a rare condition where we fail to copy the page contents
AND race with a call for hugetlb_no_page() for this index and again we
will underflow resv_huge_pages. That is fixed in a more complicated
patch not targeted for -stable.
Test:
Hacked the code locally such that resv_huge_pages underflows produce a
warning, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the test runs number
of free/resv hugepages is correct.
[mike.kravetz@oracle.com: changelog fixes]
Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com Fixes: 8fb5debc5fcd ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are a few cases where cloning an inline extent requires copying data
into a page of the destination inode. For these cases we are allocating
the required data and metadata space while holding a leaf locked. This can
result in a deadlock when we are low on available space because allocating
the space may flush delalloc and two deadlock scenarios can happen:
1) When starting writeback for an inode with a very small dirty range that
fits in an inline extent, we deadlock during the writeback when trying
to insert the inline extent, at cow_file_range_inline(), if the extent
is going to be located in the leaf for which we are already holding a
read lock;
2) After successfully starting writeback, for non-inline extent cases,
the async reclaim thread will hang waiting for an ordered extent to
complete if the ordered extent completion needs to modify the leaf
for which the clone task is holding a read lock (for adding or
replacing file extent items). So the cloning task will wait forever
on the async reclaim thread to make progress, which in turn is
waiting for the ordered extent completion which in turn is waiting
to acquire a write lock on the same leaf.
So fix this by making sure we release the path (and therefore the leaf)
every time we need to copy the inline extent's data into a page of the
destination inode, as by that time we do not need to have the leaf locked.
Fixes: 05a5a7621ce66c ("Btrfs: implement full reflink support for inline extents") CC: stable@vger.kernel.org # 5.10+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error injection stress uncovered a problem where we'd leave a dangling
inode ref if we failed during a rename_exchange. This happens because
we insert the inode ref for one side of the rename, and then for the
other side. If this second inode ref insert fails we'll leave the first
one dangling and leave a corrupt file system behind. Fix this by
aborting if we did the insert for the first inode ref.
CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
while (1) {
ret = whatever();
if (ret)
goto out;
}
ret = 0
out:
return ret;
However several places in this while loop we simply break; when there's
a problem, thus clearing the return value, and in one case we do a
return -EIO, and leak the memory for the path.
Fix this by re-arranging the loop to deal with ret == 1 coming from
btrfs_search_slot, and then simply delete the
ret = 0;
out:
bit so everybody can break if there is an error, which will allow for
proper error handling to occur.
CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are unconditionally returning 0 in cleanup_ref_head, despite the fact
that btrfs_del_csums could fail. We need to return the error so the
transaction gets aborted properly, fix this by returning ret from
btrfs_del_csums in cleanup_ref_head.
Reviewed-by: Qu Wenruo <wqu@suse.com> CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error injection stress would sometimes fail with checksums on disk that
did not have a corresponding extent. This occurred because the pattern
in btrfs_del_csums was
while (1) {
ret = btrfs_search_slot();
if (ret < 0)
break;
}
ret = 0;
out:
btrfs_free_path(path);
return ret;
If we got an error from btrfs_search_slot we'd clear the error because
we were breaking instead of goto out. Instead of using goto out, simply
handle the cases where we may leave a random value in ret, and get rid
of the
ret = 0;
out:
pattern and simply allow break to have the proper error reporting. With
this fix we properly abort the transaction and do not commit thinking we
successfully deleted the csum.
Reviewed-by: Qu Wenruo <wqu@suse.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While doing error injection testing I saw that sometimes we'd get an
abort that wouldn't stop the current transaction commit from completing.
This abort was coming from finish ordered IO, but at this point in the
transaction commit we should have gotten an error and stopped.
It turns out the abort came from finish ordered io while trying to write
out the free space cache. It occurred to me that any failure inside of
finish_ordered_io isn't actually raised to the person doing the writing,
so we could have any number of failures in this path and think the
ordered extent completed successfully and the inode was fine.
Fix this by marking the ordered extent with BTRFS_ORDERED_IOERR, and
marking the mapping of the inode with mapping_set_error, so any callers
that simply call fdatawait will also get the error.
With this we're seeing the IO error on the free space inode when we fail
to do the finish_ordered_io.
CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When checking if the probed instruction is the suffix of a prefixed
instruction, we access the instruction at the previous word. If the
probed instruction is the very first word of a module, we can end up
trying to access an invalid page.
Fix this by skipping the check for all instructions at the beginning of
a page. Prefixed instructions cannot cross a 64-byte boundary and as
such, we don't expect to encounter a suffix as the very first word in a
page for kernel text. Even if there are prefixed instructions crossing
a page boundary (from a module, for instance), the instruction will be
illegal, so preventing probing on the suffix of such prefix instructions
isn't worthwhile.
PIC interrupts do not support affinity setting and they can end up on
any online CPU. Therefore, it's required to mark the associated vectors
as system-wide reserved. Otherwise, the corresponding irq descriptors
are copied to the secondary CPUs but the vectors are not marked as
assigned or reserved. This works correctly for the IO/APIC case.
When the IO/APIC is disabled via config, kernel command line or lack of
enumeration then all legacy interrupts are routed through the PIC, but
nothing marks them as system-wide reserved vectors.
As a consequence, a subsequent allocation on a secondary CPU can result in
allocating one of these vectors, which triggers the BUG() in
apic_update_vector() because the interrupt descriptor slot is not empty.
Imran tried to work around that by marking those interrupts as allocated
when a CPU comes online. But that's wrong in case that the IO/APIC is
available and one of the legacy interrupts, e.g. IRQ0, has been switched to
PIC mode because then marking them as allocated will fail as they are
already marked as system vectors.
Stay consistent and update the legacy vectors after attempting IO/APIC
initialization and mark them as system vectors in case that no IO/APIC is
available.
Fixes: 69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment") Reported-by: Imran Khan <imran.f.khan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210519233928.2157496-1-imran.f.khan@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Releasing pinned BOs is illegal now. UVD 6 was missing from:
commit 2f40801dc553 ("drm/amdgpu: make sure we unpin the UVD BO")
Fixes: 2f40801dc553 ("drm/amdgpu: make sure we unpin the UVD BO") Cc: stable@vger.kernel.org Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On QUERY2 IOCTL don't query counts of correctable
and uncorrectable errors, since when RAS is
enabled and supported on Vega20 server boards,
this takes insurmountably long time, in O(n^3),
which slows the system down to the point of it
being unusable when we have GUI up.
Fixes: ae363a212b14 ("drm/amdgpu: Add a new flag to AMDGPU_CTX_OP_QUERY_STATE2") Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's possible to trigger NULL pointer dereference by local unprivileged
user, when calling getsockname() after failed bind() (e.g. the bind
fails because LLCP_SAP_MAX used as SAP):
The first two bits of the CPUID leaf 0x8000001F EAX indicate whether SEV
or SME is supported, respectively. It's better to check whether SEV or
SME is actually supported before accessing the MSR_AMD64_SEV to check
whether SEV or SME is enabled.
This is both a bare-metal issue and a guest/VM issue. Since the first
generation Hygon Dhyana CPU doesn't support the MSR_AMD64_SEV, reading that
MSR results in a #GP - either directly from hardware in the bare-metal
case or via the hypervisor (because the RDMSR is actually intercepted)
in the guest/VM case, resulting in a failed boot. And since this is very
early in the boot phase, rdmsrl_safe()/native_read_msr_safe() can't be
used.
So check the CPUID bits first, before accessing the MSR.
Fixes: eab696d8e8b9 ("x86/sev: Do not require Hypervisor CPUID bit for SEV guests") Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@vger.kernel.org> # v5.10+ Link: https://lkml.kernel.org/r/20210602070207.2480-1-puwen@hygon.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While digesting the XSAVE-related horrors which got introduced with
the supervisor/user split, the recent addition of ENQCMD-related
functionality got on the radar and turned out to be similarly broken.
update_pasid(), which is only required when X86_FEATURE_ENQCMD is
available, is invoked from two places:
1) From switch_to() for the incoming task
2) Via a SMP function call from the IOMMU/SMV code
#1 is half-ways correct as it hacks around the brokenness of get_xsave_addr()
by enforcing the state to be 'present', but all the conditionals in that
code are completely pointless for that.
Also the invocation is just useless overhead because at that point
it's guaranteed that TIF_NEED_FPU_LOAD is set on the incoming task
and all of this can be handled at return to user space.
#2 is broken beyond repair. The comment in the code claims that it is safe
to invoke this in an IPI, but that's just wishful thinking.
FPU state of a running task is protected by fregs_lock() which is
nothing else than a local_bh_disable(). As BH-disabled regions run
usually with interrupts enabled the IPI can hit a code section which
modifies FPU state and there is absolutely no guarantee that any of the
assumptions which are made for the IPI case is true.
Also the IPI is sent to all CPUs in mm_cpumask(mm), but the IPI is
invoked with a NULL pointer argument, so it can hit a completely
unrelated task and unconditionally force an update for nothing.
Worse, it can hit a kernel thread which operates on a user space
address space and set a random PASID for it.
The offending commit does not cleanly revert, but it's sufficient to
force disable X86_FEATURE_ENQCMD and to remove the broken update_pasid()
code to make this dysfunctional all over the place. Anything more
complex would require more surgery and none of the related functions
outside of the x86 core code are blatantly wrong, so removing those
would be overkill.
As nothing enables the PASID bit in the IA32_XSS MSR yet, which is
required to make this actually work, this cannot result in a regression
except for related out of tree train-wrecks, but they are broken already
today.
Fixes: 20f0afd1fb3d ("x86/mmu: Allocate/free a PASID") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/87mtsd6gr9.ffs@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently we found that there is a lot MemFree left in /proc/meminfo
after do a lot of pages soft offline, it's not quite correct.
Before Oscar's rework of soft offline for free pages [1], if we soft
offline free pages, these pages are left in buddy with HWPoison flag,
and NR_FREE_PAGES is not updated immediately. So the difference between
NR_FREE_PAGES and real number of available free pages is also even big
at the beginning.
However, with the workload running, when we catch HWPoison page in any
alloc functions subsequently, we will remove it from buddy, meanwhile
update the NR_FREE_PAGES and try again, so the NR_FREE_PAGES will get
more and more closer to the real number of available free pages.
(regardless of unpoison_memory())
Now, for offline free pages, after a successful call
take_page_off_buddy(), the page is no longer belong to buddy allocator,
and will not be used any more, but we missed accounting NR_FREE_PAGES in
this situation, and there is no chance to be updated later.
Do update in take_page_off_buddy() like rmqueue() does, but avoid double
counting if some one already set_migratetype_isolate() on the page.
[1]: commit 06be6ff3d2ec ("mm,hwpoison: rework soft offline for free pages")
Link: https://lkml.kernel.org/r/20210526075247.11130-1-dinghui@sangfor.com.cn Fixes: 06be6ff3d2ec ("mm,hwpoison: rework soft offline for free pages") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Suggested-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In pmd/pud_advanced_tests(), the vaddr is aligned up to the next pmd/pud
entry, and so it does not match the given pmdp/pudp and (aligned down)
pfn any more.
For s390, this results in memory corruption, because the IDTE
instruction used e.g. in xxx_get_and_clear() will take the vaddr for
some calculations, in combination with the given pmdp. It will then end
up with a wrong table origin, ending on ...ff8, and some of those
wrongly set low-order bits will also select a wrong pagetable level for
the index addition. IDTE could therefore invalidate (or 0x20) something
outside of the page tables, depending on the wrongly picked index, which
in turn depends on the random vaddr.
As result, we sometimes see "BUG task_struct (Not tainted): Padding
overwritten" on s390, where one 0x5a padding value got overwritten with
0x7a.
Fix this by aligning down, similar to how the pmd/pud_aligned pfns are
calculated.
When fallocate punches holes out of inode size, if original isize is in
the middle of last cluster, then the part from isize to the end of the
cluster will be zeroed with buffer write, at that time isize is not yet
updated to match the new size, if writeback is kicked in, it will invoke
ocfs2_writepage()->block_write_full_page() where the pages out of inode
size will be dropped. That will cause file corruption. Fix this by
zero out eof blocks when extending the inode size.
Running the following command with qemu-image 4.2.1 can get a corrupted
coverted image file easily.
Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During boot, kernel_init_freeable() initializes `cad_pid` to the init
task's struct pid. Later on, we may change `cad_pid` via a sysctl, and
when this happens proc_do_cad_pid() will increment the refcount on the
new pid via get_pid(), and will decrement the refcount on the old pid
via put_pid(). As we never called get_pid() when we initialized
`cad_pid`, we decrement a reference we never incremented, can therefore
free the init task's struct pid early. As there can be dangling
references to the struct pid, we can later encounter a use-after-free
(e.g. when delivering signals).
This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to
have been around since the conversion of `cad_pid` to struct pid in
commit 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid") from the
pre-KASAN stone age of v2.6.19.
Fix this by getting a reference to the init task's struct pid when we
assign it to `cad_pid`.
Full KASAN splat below.
==================================================================
BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline]
BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273
Memory state around the buggy address: ffff23794dd9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff23794dd9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff23794dda0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff23794dda0080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff23794dda0100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Link: https://lkml.kernel.org/r/20210524172230.38715-1-mark.rutland@arm.com Fixes: 9ec52099e4b8678a ("[PATCH] replace cad_pid by a struct pid") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Christian Brauner <christian@brauner.io> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phil Elwell [Tue, 8 Jun 2021 12:00:49 +0000 (13:00 +0100)]
usb: dwc2: Fix build in periphal-only mode
In branches to which 24d209dba5a3 ("usb: dwc2: Fix hibernation between
host and device modes.") has been back-ported, the bus_suspended member
of struct dwc2_hsotg is only present in builds that support host-mode.
To avoid having to pull in several more non-Fix commits in order to
get it to compile, wrap the usage of the member in a macro conditional.
Fixes: 24d209dba5a3 ("usb: dwc2: Fix hibernation between host and device modes.") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running generic/527 with fast_commit configuration, the following
issue is seen on Power. With fast_commit, during ext4_fc_replay()
(which can be called from ext4_fill_super()), if inode eviction
happens then it can access an uninitialized percpu counter variable.
This patch adds the check before accessing the counters in
ext4_free_inode() path.
[ 321.165371] run fstests generic/527 at 2021-04-29 08:38:43
[ 323.027786] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: block_validity. Quota mode: none.
[ 323.618772] BUG: Unable to handle kernel data access on read at 0x1fbd80000
[ 323.619767] Faulting instruction address: 0xc000000000bae78c
cpu 0x1: Vector: 300 (Data Access) at [c000000010706ef0]
pc: c000000000bae78c: percpu_counter_add_batch+0x3c/0x100
lr: c0000000006d0bb0: ext4_free_inode+0x780/0xb90
pid = 5593, comm = mount
ext4_free_inode+0x780/0xb90
ext4_evict_inode+0xa8c/0xc60
evict+0xfc/0x1e0
ext4_fc_replay+0xc50/0x20f0
do_one_pass+0xfe0/0x1350
jbd2_journal_recover+0x184/0x2e0
jbd2_journal_load+0x1c0/0x4a0
ext4_fill_super+0x2458/0x4200
mount_bdev+0x1dc/0x290
ext4_mount+0x28/0x40
legacy_get_tree+0x4c/0xa0
vfs_get_tree+0x4c/0x120
path_mount+0xcf8/0xd70
do_mount+0x80/0xd0
sys_mount+0x3fc/0x490
system_call_exception+0x384/0x3d0
system_call_common+0xec/0x278
Fast commit recovery data on disk may not be aligned. So, when the
recovery code reads it, this patch makes sure that fast commit info
found on-disk is first memcpy-ed into an aligned variable before
accessing it. As a consequence of it, we also remove some macros that
could resulted in unaligned accesses.
This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable). Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Buffer head references must be released before calling kill_bdev();
otherwise the buffer head (and its page referenced by b_data) will not
be freed by kill_bdev, and subsequently that bh will be leaked.
If blocksizes differ, sb_set_blocksize() will kill current buffers and
page cache by using kill_bdev(). And then super block will be reread
again but using correct blocksize this time. sb_set_blocksize() didn't
fully free superblock page and buffer head, and being busy, they were
not freed and instead leaked.
This can easily be reproduced by calling an infinite loop of:
systemctl start <ext4_on_lvm>.mount, and
systemctl stop <ext4_on_lvm>.mount
... since systemd creates a cgroup for each slice which it mounts, and
the bh leak get amplified by a dying memory cgroup that also never
gets freed, and memory consumption is much more easily noticed.
Fixes: ce40733ce93d ("ext4: Check for return value from sb_set_blocksize") Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3") Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.com Signed-off-by: Alexey Makhalov <amakhalov@vmware.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
While no instability or problems are currently observed, the regulators
should be fully described in DT and that description should fully match
the hardware, else this might lead to unforseen issues later. Fix this.
Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FEC does not have a PHY so it should not have a phy-handle. It is
connected to the switch at RGMII level so we need a fixed-link sub-node
on both ends.
This was not a problem until the qca8k.c driver was converted to PHYLINK
by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of
PHYLIB"). That commit revealed the FEC configuration was not correct.
Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards") Cc: stable@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch_realtek.c needs to check if the power_state.event equals
PM_EVENT_SUSPEND, after using the direct-complete, the suspend() and
resume() will be skipped if the codec is already rt_suspended, in this
case, the patch_realtek.c will always get PM_EVENT_ON even the system
is really resumed from S3.
We could set power_state to PMSG_SUSPEND in the prepare(), if other
PM functions are called before complete(), those functions will
override power_state; if no other PM functions are called before
complete(), we could know the suspend() and resume() are skipped since
only S3 pm functions could be skipped by direct-complete, in this case
set power_state to PMSG_RESUME in the complete(). This could guarantee
the first time of calling hda_codec_runtime_resume() after complete()
has the correct power_state.
Fixes: 215a22ed31a1 ("ALSA: hda: Refactor codec PM to use direct-complete optimization") Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210602145424.3132-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the HP Pavilion 15-CK0xx, with audio subsystem ID 0x103c:0x841c,
adding a line in patch_realtek.c to apply the ALC269_FIXUP_HP_MUTE_LED_MIC3
fix activates the mute key LED.
snd_timer_notify1() calls the notification to each slave for a master
event, but it passes a wrong event number. It should be +10 offset,
corresponding to SNDRV_TIMER_EVENT_MXXX, but it's incorrectly with
+100 offset. Casually this was spotted by UBSAN check via syzkaller.
Before this patch, in the unlikely event that gfs2_glock_dq encountered
a withdraw, it would do a wait_on_bit to wait for its journal to be
recovered, but it never released the glock's spin_lock, which caused a
scheduling-while-atomic error.
This patch unlocks the lockref spin_lock before waiting for recovery.
Fixes: 601ef0d52e96 ("gfs2: Force withdraw to replay journals and wait for it to finish") Cc: stable@vger.kernel.org # v5.7+ Reported-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This effectively changes collection_is_mt from
contact ID in report->field
to
(device is Win8 => collection is finger) && contact ID in report->field
Some devices erroneously report Pen for fingers, and Win8 stylus-on-touchscreen
devices report contact ID, but mark the accompanying touchscreen device's
collection correctly
Commit 9d7b18668956 ("HID: magicmouse: add support for Apple Magic
Trackpad 2") added a sanity check for an Apple trackpad but returned
success instead of -ENODEV when the check failed. This means that the
remove callback will dereference the never-initialised driver data
pointer when the driver is later unbound (e.g. on USB disconnect).
Reported-by: syzbot+ee6f6e2e68886ca256a8@syzkaller.appspotmail.com Fixes: 9d7b18668956 ("HID: magicmouse: add support for Apple Magic Trackpad 2") Cc: stable@vger.kernel.org # 4.20 Cc: Claudio Mettler <claudio@ponyfleisch.ch> Cc: Marek Wyborski <marek.wyborski@emwesoft.com> Cc: Sean O'Brien <seobrien@chromium.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For ELAN touchscreen, we found our boot code of IC was not flexible enough
to receive and handle this command.
Once the FW main code of our controller is crashed for some reason,
the controller could not be enumerated successfully to be recognized
by the system host. therefore, it lost touch functionality.
Add quirk for skip send power-on command after reset.
It will impact to ELAN touchscreen and touchpad on HID over I2C projects.
Fixes: 43b7029f475e ("HID: i2c-hid: Send power-on command after reset"). Cc: stable@vger.kernel.org Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com> Reviewed-by: Harry Cutts <hcutts@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error.
Fixes: 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface") Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error
Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+7ec324747ce876a29db6@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
caif_enroll_dev() can fail in some cases. Ingnoring
these cases can lead to memory leak due to not assigning
link_support pointer to anywhere.
Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll") Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When removing single nodes, it's possible that that node's parent is an
empty intermediate node, in which case, it too should be removed.
Otherwise the trie fills up and never is fully emptied, leading to
gradual memory leaks over time for tries that are modified often. There
was originally code to do this, but was removed during refactoring in
2016 and never reworked. Now that we have proper parent pointers from
the previous commits, we can implement this properly.
In order to reduce branching and expensive comparisons, we want to keep
the double pointer for parent assignment (which lets us easily chain up
to the root), but we still need to actually get the parent's base
address. So encode the bit number into the last two bits of the pointer,
and pack and unpack it as needed. This is a little bit clumsy but is the
fastest and less memory wasteful of the compromises. Note that we align
the root struct here to a minimum of 4, because it's embedded into a
larger struct, and we're relying on having the bottom two bits for our
flag, which would only be 16-bit aligned on m68k.
The existing macro-based helpers were a bit unwieldy for adding the bit
packing to, so this commit replaces them with safer and clearer ordinary
functions.
We add a test to the randomized/fuzzer part of the selftests, to free
the randomized tries by-peer, refuzz it, and repeat, until it's supposed
to be empty, and then then see if that actually resulted in the whole
thing being emptied. That combined with kmemcheck should hopefully make
sure this commit is doing what it should. Along the way this resulted in
various other cleanups of the tests and fixes for recent graphviz.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous commit moved from O(n) to O(1) for removal, but in the
process introduced an additional pointer member to a struct that
increased the size from 60 to 68 bytes, putting nodes in the 128-byte
slab. With deployed systems having as many as 2 million nodes, this
represents a significant doubling in memory usage (128 MiB -> 256 MiB).
Fix this by using our own kmem_cache, that's sized exactly right. This
also makes wireguard's memory usage more transparent in tools like
slabtop and /proc/slabinfo.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Matthew Wilcox <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, deleting peers would require traversing the entire trie in
order to rebalance nodes and safely free them. This meant that removing
1000 peers from a trie with a half million nodes would take an extremely
long time, during which we're holding the rtnl lock. Large-scale users
were reporting 200ms latencies added to the networking stack as a whole
every time their userspace software would queue up significant removals.
That's a serious situation.
This commit fixes that by maintaining a double pointer to the parent's
bit pointer for each node, and then using the already existing node list
belonging to each peer to go directly to the node, fix up its pointers,
and free it with RCU. This means removal is O(1) instead of O(n), and we
don't use gobs of stack.
The removal algorithm has the same downside as the code that it fixes:
it won't collapse needlessly long runs of fillers. We can enhance that
in the future if it ever becomes a problem. This commit documents that
limitation with a TODO comment in code, a small but meaningful
improvement over the prior situation.
Currently the biggest flaw, which the next commit addresses, is that
because this increases the node size on 64-bit machines from 60 bytes to
68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up
using twice as much memory per node, because of power-of-two
allocations, which is a big bummer. We'll need to figure something out
there.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The randomized trie tests weren't initializing the dummy peer list head,
resulting in a NULL pointer dereference when used. Fix this by
initializing it in the randomized trie test, just like we do for the
static unit test.
While we're at it, all of the other strings like this have the word
"self-test", so add it to the missing place here.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some distros may enable strict rp_filter by default, which will prevent
vethc from receiving the packets with an unrouteable reverse path address.
Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
