res_rtp_asterisk: Make P2P bridge Asymmetric codec aware
Introduce a new property to rtp-engine to make it aware of
the desire for assymetric codecs or not. If asymmetric codecs
is not allowed, the bridge will compare read/write formats
and shut down the p2p bridge if needed
Joshua Colp [Sat, 5 Aug 2017 11:36:49 +0000 (11:36 +0000)]
res_pjsip_session: Release media resources on session end quicker.
A change was made long ago where the session was kept around
until the underlying INVITE session had been destroyed. This
had the side effect of also keeping the underlying media resources
around for this time as well.
This change ensures that when we are told to terminate the
session we immediately release any media sessions associated
with it.
Joshua Colp [Sun, 6 Aug 2017 16:15:34 +0000 (16:15 +0000)]
bridge: Fix stream topology/participant locking and video misrouting.
This change fixes a few locking issues and some video misrouting.
1. When accessing the stream topology of a channel the channel lock
must be held to guarantee the topology remains valid.
2. When a channel was joined to a bridge the bridge specific
implementation for stream mapping was not invoked, causing video
to be misrouted for a brief period of time.
Kevin Harwell [Fri, 4 Aug 2017 21:47:30 +0000 (16:47 -0500)]
res_pjsip_session/_sdp_rtp: Handling of 'msid' is incorrect
Currently, the handling of the msid attribute is not quite right. According to
the spec the msid's between the offer/answer are not dependent upon one another.
Meaning the same msid's given in an offer do not have to be returned in the
answer for a given stream. And they probably shouldn't be (copied/reused) since
this can potentially cause some browser side confusion.
This patch generates new msids when both an offer and answer are sent from
Asterisk. However, Asterisk does reuse the original msid it sent out for a
reinvite. Also audio+video streams are paired together by sharing the same
stream id, but a different track id.
Corey Farrell [Fri, 4 Aug 2017 01:58:25 +0000 (21:58 -0400)]
Correct some leaks in unit tests.
* chan_sip: channel in test_sip_rtpqos_1.
* test_config: config hook, config info and global config holder.
* test_core_format: format in format_attribute_set_without_interface.
* test_stream: unneeded frame duplication.
* test_taskprocessor: task_data.
When the "webrtc" option was added in res_pjsip it was not added to the alembic
scripts. This patch adds the option for alembic.
Also, changed the sorcery configuration type to an OPT_YESNO_T value instead of
an OPT_BOOL_T so if this field is ever written to a database it will write out
the correct value.
res_pjsip_session: Release media resources on session end quicker.
A change was made long ago where the session was kept around
until the underlying INVITE session had been destroyed. This
had the side effect of also keeping the underlying media resources
around for this time as well.
This change ensures that when we know the session is ending we
release the media resources immediately.
Sean Bright [Wed, 26 Jul 2017 13:48:29 +0000 (09:48 -0400)]
res_pjsip_pidf_eyebeam_body_supplement: Correct status presentation
This change fixes PIDF content generation when the underlying device
state is considered in use. Previously it was incorrectly marked
as closed meaning they were offline/unavailable. The code now
correctly marks them as open.
Additionally:
* Generate an XML element for our activity instead of a using a text
node.
* Consider every extension state other than "unavailable" to be 'open'
status.
* Update the XML namespaces and structure to reflect those
documented in RFC 4480
* Use 'on-the-phone' (defined in RFC 4880) instead of 'busy' as the
"in use" activity. This change results in eyeBeam using the
appropriate icon for the watched user.
This was tested on eyeBeam 1.5.20.2 build 59030 on Windows.
ASTERISK-26659 #close
Reported by: Abraham Liebsch
patches:
ASTERISK-26659.diff submitted by snuffy (license 5024)
res_pjsip: Add support for dnsmgr to external_media_address.
The "external_media_address" option on transports is now
resolved using dnsmgr. This allows it to be automatically
refreshed regularly if refreshes are enabled in dnsmgr.
If the system is using a dynamic IP address a dynamic DNS
hostname can be provided to keep the IP address up to
date.
GCC 7 has added capability to produce warnings, this fixes most of those
warnings. The specific warnings are disabled in a few places:
* app_voicemail.c: truncation of paths more than 4096 chars in many places.
* chan_mgcp.c: callid truncated to 80 chars.
* cdr.c: two userfields are combined to cdr copy, fix would break ABI.
* tcptls.c: ignore use of deprecated method SSLv3_client_method().
Sean Bright [Wed, 26 Jul 2017 14:27:00 +0000 (10:27 -0400)]
app_queue: Add announce-position-only-up option
Setting this option will cause the Queue application to only announce
the caller's position if it has improved since the last time that we
announced it.
George Joseph [Thu, 27 Jul 2017 11:35:51 +0000 (05:35 -0600)]
bundled_pjproject: Improve SSL/TLS error handling
OpenSSL has 2 levels or error processing. It's possible for the
top layer to return SSL_ERROR_SYSCALL but the lower layer return
no error, in which case processing should continue. Only the top
layer was being examined though so connections were being torn
down when they didn't need to be. This patch adds the examination
of the lower level codes, and if they return no errors, allows
processing to continue.
ASTERISK-27001 Reported-by: Ian Gilmour
patches:
pjproject-2.6.patch submitted by Ian Gilmour (license 6889)
Updated-by: George Joseph and Sauw Ming (Teluu)
Merged to upstream pjproject on 7/27/2017 (commit 5631)
bridge_softmix / res_rtp_asterisk: Fix packet loss and renegotiation issues.
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
The tests were noting the start of the vm-incorrect-mailbox prompt and
immediately sending the mailbox for the next login attempt. Since the
invalid message playback had to complete before the digits were
recognized, the test passed for the wrong reason and added approximately
20 seconds to the test times.
* Allow the vm-incorrect-mailbox prompt to get interrupted by the mailbox
digits like the initial vm-login prompt so the tests are able to enter the
intended mailbox.
Rusty Newton [Fri, 21 Jul 2017 19:20:10 +0000 (14:20 -0500)]
Sounds: Update Makefile for Extra sounds 1.5.1 release
Incrementing version for the Extra sounds release. 1.5.1 Extra sounds
removes two prompts that were moved into the Core packages in the 1.6 Core
sounds release.
Rusty Newton [Fri, 14 Jul 2017 18:47:50 +0000 (13:47 -0500)]
say.c: Fix file locations for second, seconds, minute, minutes files
The seconds and minutes files have always existed in the base language
directory of the Core package. So say.c has always been calling the wrong
location (under digits/) for those two files and in the case of second and
minute they didn't exist in the Core packages at all.
The 1.6 sounds release moves the second and minute files into Core from
Extra for the languages that already had them. A future release will include
the second and minute files for languages that didn't already have them.
This patch just changes all the target locations for second, seconds,
minute, and minutes that were under the digits subdir to be under the root of
sounds instead. Which is where the sounds will be for some languages after 1.6
sounds and for all languages after a future release.
ASTERISK-25810 #close
Change-Id: I05d9d4bee6a7237030530a46e7eb3df15f13f702 Reported-by: Nicolas Riendeau
Corey Farrell [Mon, 19 Jun 2017 00:24:04 +0000 (20:24 -0400)]
Core: Add support for systemd socket activation.
This change adds support for socket activation of certain SOCK_STREAM
listeners in Asterisk:
* AMI / AMI over TLS
* CLI
* HTTP / HTTPS
Example systemd units are provided. This support extends to any socket
which is initialized using ast_tcptls_server_start, so any unknown
modules using this function will support socket activation.
Asterisk continues to function as normal if socket activation is not
enabled or if systemd development headers are not available during
build.
bridge_softmix: Don't reorder streams on participant leaving.
When a participant leaves a bridge while operating in SFU mode
their respective stream on every other participant needs to be
removed. Leaving the stream out of the new topology results in
every stream after it being moved and reordered. This causes
problems with clients. Instead simply mark the stream as removed
which leaves it in place in the SDP and doesn't reorder or touch
any other streams.
bridge_softmix: Use removed stream spots when renegotiating.
Streams are never truly removed in SDP, they still occupy
a location within the SDP. This location can be reused by
another stream if it so chooses.
This change takes advantage of this such that if a new stream
is needing to be added for a new participant any removed streams
are instead replaced first. This reduces the size of the SDP
and the number of streams.
app_confbridge: Make sure name recordings are always removed from the filesystem
This commit fixes two possible scenarios:
* When recording name and if during recording you hangup, file is never
removed. This is due to the fact file location is nulled.
* When recording name and if you hangup during thank-you prompt, file
is never removed.
Kevin Harwell [Mon, 10 Jul 2017 23:17:44 +0000 (18:17 -0500)]
res_pjsip: Add "webrtc" configuration option
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
core: Add PARSE_TIMELEN support to ast_parse_arg and ACO.
This adds support for parsing timelen values from config files. This
includes support for all flags which apply to PARSE_INT32. Support for
this parser is added to ACO via the OPT_TIMELEN_T option type.
Fixes an issue where extra characters provided to ast_app_parse_timelen
were ignored, they now cause an error.
Joshua Colp [Fri, 30 Jun 2017 18:55:57 +0000 (18:55 +0000)]
res_rtp_asterisk / res_pjsip: Add support for BUNDLE.
BUNDLE is a specification used in WebRTC to allow multiple
streams to use the same underlying transport. This reduces
the number of ICE and DTLS negotiations that has to occur
to 1 normally.
This change implements this by adding support for it to
the RTP SDP module in PJSIP. BUNDLE can be turned on using
the "bundle" option and on an offer we will offer to
bundle streams together. On an answer we will accept any
bundle groups provided. Once accepted each stream is bundled
to another RTP instance for transport.
For the res_rtp_asterisk changes the ability to bundle
an RTP instance to another based on the SSRC received
from the remote side has been added. For outgoing traffic
if an RTP instance is bundled to another we will use the
other RTP instance for any transport related things. For
incoming traffic received from the transport instance we
look up the correct instance based on the SSRC and use it
for any non-transport related data.
res/res_stasis_snoop: generate silence when audiohook returns null
Currently when rtp is paused, no packets are written to the
recorded audio file, causing the silence to be skipped and recording
not properly time aligned. The read handler as been adapted to
return a silence frame of the correct size.
core: Add digit filtering to ast_waitfordigit_full
This adds a parameter to ast_waitfordigit_full which can be used to only
stop waiting when certain expected digits are received. Any unexpected
DTMF digits are simply ignored.
This also creates a new dialplan application WaitDigit.
bridge/core_unreal: Fix SFU bugs with forwarding frames.
This change fixes a few things uncovered during SFU testing.
1. Unreal channels incorrectly forwarded video frames when
no video stream was present on them. This caused a crash when
they were read as the core requires a stream to exist for the
underlying media type. The Unreal channel will now ensure a
stream exists for the media type before forwarding the frame
and if no stream exists then the frame is dropped.
2. Mapping of frames during bridging from the stream number of
the underlying channel to the stream number of the bridge was
done in the wrong location. This resulted in the frame getting
dropped. This mapping now occurs on reading of the frame from
the channel.
3. Bridging was using the wrong ast_read function resulting in
it living in a non-multistream world.
4. In bridge_softmix when adding new streams to existing channels
the wrong stream topology was copied resulting in no streams
being added.
George Joseph [Tue, 11 Jul 2017 12:26:27 +0000 (06:26 -0600)]
res_musiconhold: Add kill_escalation_delay, kill_method to class
By default, when res_musiconhold reloads or unloads, it sends a HUP
signal to custom applications (and all descendants), waits 100ms,
then sends a TERM signal, waits 100ms, then finally sends a KILL
signal. An application which is interacting with an external
device and/or spawns children of its own may not be able to exit
cleanly in the default times, expecially if sent a KILL signal, or
if it's children are getting signals directly from
res_musiconhoild.
* To allow extra time, the 'kill_escalation_delay'
class option can be used to set the number of milliseconds
res_musiconhold waits before escalating kill signals, with the
default being the current 100ms.
* To control to whom the signals are sent, the "kill_method" class
option can be set to "process_group" (the default, existing
behavior), which sends signals to the application and its
descendants directly, or "process" which sends signals only to the
application itself.
When performing the "Queues" action via AMI, it outputs the same
text that the Asterisk CLI outputs when running a "queue show"
command, which does not conform with the AMI spec. "QueueStatus"
already does what the "Queues" action should do, so instead of
correcting the output, the "Queues" action will be removed and
"QueueStatus" should be used instead.
George Joseph [Wed, 5 Jul 2017 20:31:43 +0000 (14:31 -0600)]
http.c: Reduce log spam
Messages like "fwrite() failed: Connection reset by peer" are no
help whatsoever, especially since they can be caused simply by a
client disconnecting.
* Make those WARNINGs DEBUGs.
* Check the return from ast_iostream_printf of headers.
projects / thirdparty / asterisk.git / log
