Returning an undecorated integer is an age-old trope, but it's
not clear (even to previous experts in this code) that the only
valid return values are 1 and 0. These functions do not return
a negative errno, rpc_stat value, or a positive length.
Document there are only two valid return values by having
.pc_encode return only true or false.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR encoder, and can be removed.
Note also that there is a line in each encoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per encoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Currently nfs4svc_encode_compoundres() relies on the NFS
dispatcher to pass in the buffer location of the COMPOUND status.
Instead, save that buffer location in struct nfsd4_compoundres.
The compound tag follows immediately after.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Returning an undecorated integer is an age-old trope, but it's
not clear (even to previous experts in this code) that the only
valid return values are 1 and 0. These functions do not return
a negative errno, rpc_stat value, or a positive length.
Document there are only two valid return values by having
.pc_decode return only true or false.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR decoder, and can be removed.
Note also that there is a line in each decoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per decoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pointer ni is being initialized with plain integer zero. Fix
this by initializing with NULL.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Most of the fields in 'struct knfsd_fh' are 2 levels deep (a union and a
struct) and are accessed using macros like:
#define fh_FOO fh_base.fh_new.fb_FOO
This patch makes the union and struct anonymous, so that "fh_FOO" can be
a name directly within 'struct knfsd_fh' and the #defines aren't needed.
The file handle as a whole is sometimes accessed as "fh_base" or
"fh_base.fh_pad", neither of which are particularly helpful names.
As the struct holding the filehandle is now anonymous, we
cannot use the name of that, so we union it with 'fh_raw' and use that
where the raw filehandle is needed. fh_raw also ensure the structure is
large enough for the largest possible filehandle.
fh_raw is a 'char' array, removing any need to cast it for memcpy etc.
SVCFH_fmt() is simplified using the "%ph" printk format. This
changes the appearance of filehandles in dprintk() debugging, making
them a little more precise.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Filehandles not in the "new" or "version 1" format have not been handed
out for new mounts since Linux 2.4 which was released 20 years ago.
I think it is safe to say that no such file handles are still in use,
and that we can drop support for them.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A small part of the declaration concerning filehandle format are
currently in the "uapi" include directory:
include/uapi/linux/nfsd/nfsfh.h
There is a lot more to the filehandle format, including "enum fid_type"
and "enum nfsd_fsid" which are not exported via "uapi".
This small part of the filehandle definition is of minimal use outside
of the kernel, and I can find no evidence that an other code is using
it. Certainly nfs-utils and wireshark (The most likely candidates) do not
use these declarations.
So move it out of "uapi" by copying the content from
include/uapi/linux/nfsd/nfsfh.h
into
fs/nfsd/nfsfh.h
A few unnecessary "#include" directives are not copied, and neither is
the #define of fh_auth, which is annotated as being for userspace only.
The copyright claims in the uapi file are identical to those in the nfsd
file, so there is no need to copy those.
The "__u32" style integer types are only needed in "uapi". In
kernel-only code we can use the more familiar "u32" style.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
DRC bucket pruning is done by nfsd_cache_lookup(), which is part of
every NFSv2 and NFSv3 dispatch (ie, it's done while the client is
waiting).
I added a trace_printk() in prune_bucket() to see just how long
it takes to prune. Here are two ends of the spectrum:
prune_bucket: Scanned 1 and freed 0 in 90 ns, 62 entries remaining
prune_bucket: Scanned 2 and freed 1 in 716 ns, 63 entries remaining
...
prune_bucket: Scanned 75 and freed 74 in 34149 ns, 1 entries remaining
Pruning latency is noticeable on fast transports with fast storage.
By noticeable, I mean that the latency measured here in the worst
case is the same order of magnitude as the round trip time for
cached server operations.
We could do something like moving expired entries to an expired list
and then free them later instead of freeing them right in
prune_bucket(). But simply limiting the number of entries that can
be pruned by a lookup is simple and retains more entries in the
cache, making the DRC somewhat more effective.
Comparison with a 70/30 fio 8KB 12 thread direct I/O test:
Before:
write: IOPS=61.6k, BW=481MiB/s (505MB/s)(14.1GiB/30001msec); 0 zone resets
WRITE: 1848726 ops (30%)
avg bytes sent per op: 8340 avg bytes received per op: 136
backlog wait: 0.635158 RTT: 0.128525 total execute time: 0.827242 (milliseconds)
After:
write: IOPS=63.0k, BW=492MiB/s (516MB/s)(14.4GiB/30001msec); 0 zone resets
WRITE: 1891144 ops (30%)
avg bytes sent per op: 8340 avg bytes received per op: 136
backlog wait: 0.616114 RTT: 0.126842 total execute time: 0.805348 (milliseconds)
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: surface useful show_ macros so they can be shared between
the client and server trace code.
Additional clean up:
- Housekeeping: ensure the correct #include files are pulled in
and add proper TRACE_DEFINE_ENUM where they are missing
- Use a consistent naming scheme for the helpers
- Store values to be displayed symbolically as unsigned long, as
that is the type that the __print_yada() functions take
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For certain special cases, RPC-related tracepoints record a -1 as
the task ID or the client ID. It's ugly for a trace event to display
4 billion in these cases.
To help keep SUNRPC tracepoints consistent, create a macro that
defines the print format specifiers for tk_pid and cl_clid. At some
point in the future we might try tk_pid with a wider range of values
than 0..64K so this makes it easier to make that change.
Document the FAN_FS_ERROR event for user administrators and user space
developers.
Link: https://lore.kernel.org/r/20211025192746.66445-32-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Send a FS_ERROR message via fsnotify to a userspace monitoring tool
whenever a ext4 error condition is triggered. This follows the existing
error conditions in ext4, so it is hooked to the ext4_error* functions.
Link: https://lore.kernel.org/r/20211025192746.66445-30-krisman@collabora.com Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Acked-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Wire up the FAN_FS_ERROR event in the fanotify_mark syscall, allowing
user space to request the monitoring of FAN_FS_ERROR events.
These events are limited to filesystem marks, so check it is the
case in the syscall handler.
Link: https://lore.kernel.org/r/20211025192746.66445-29-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The error info is a record sent to users on FAN_FS_ERROR events
documenting the type of error. It also carries an error count,
documenting how many errors were observed since the last reporting.
Link: https://lore.kernel.org/r/20211025192746.66445-28-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Plumb the pieces to add a FID report to error records. Since all error
event memory must be pre-allocated, we pre-allocate the maximum file
handle size possible, such that it should always fit.
For errors that don't expose a file handle, report it with an invalid
FID. Internally we use zero-length FILEID_ROOT file handle for passing
the information (which we report as zero-length FILEID_INVALID file
handle to userspace) so we update the handle reporting code to deal with
this case correctly.
struct fanotify_error_event, at least, is preallocated and isn't able to
to handle arbitrarily large file handles. Future-proof the code by
complaining loudly if a handle larger than MAX_HANDLE_SZ is ever found.
Link: https://lore.kernel.org/r/20211025192746.66445-26-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that there is an event that reports FID records even for a zeroed
file handle, wrap the logic that deides whether to issue the records
into helper functions. This shouldn't have any impact on the code, but
simplifies further patches.
Link: https://lore.kernel.org/r/20211025192746.66445-24-krisman@collabora.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
fanotify_error_event would duplicate this sequence of declarations that
already exist elsewhere with a slight different size. Create a helper
macro to avoid code duplication.
Link: https://lore.kernel.org/r/20211025192746.66445-23-krisman@collabora.com Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Error events (FAN_FS_ERROR) against the same file system can be merged
by simply iterating the error count. The hash is taken from the fsid,
without considering the FH. This means that only the first error object
is reported.
Link: https://lore.kernel.org/r/20211025192746.66445-22-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Once an error event is triggered, enqueue it in the notification group,
similarly to what is done for other events. FAN_FS_ERROR is not
handled specially, since the memory is now handled by a preallocated
mempool.
For now, make the event unhashed. A future patch implements merging of
this kind of event.
Link: https://lore.kernel.org/r/20211025192746.66445-21-krisman@collabora.com Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pre-allocate slots for file system errors to have greater chances of
succeeding, since error events can happen in GFP_NOFS context. This
patch introduces a group-wide mempool of error events, shared by all
FAN_FS_ERROR marks in this group.
Link: https://lore.kernel.org/r/20211025192746.66445-20-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
FAN_FS_ERROR allows reporting of event type FS_ERROR to userspace, which
is a mechanism to report file system wide problems via fanotify. This
commit preallocate userspace visible bits to match the FS_ERROR event.
Link: https://lore.kernel.org/r/20211025192746.66445-19-krisman@collabora.com Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Expose a new type of fsnotify event for filesystems to report errors for
userspace monitoring tools. fanotify will send this type of
notification for FAN_FS_ERROR events. This also introduce a helper for
generating the new event.
Link: https://lore.kernel.org/r/20211025192746.66445-18-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Like inode events, FAN_FS_ERROR will require fid mode. Therefore,
convert the verification during fanotify_mark(2) to require fid for any
non-fd event. This means fid_mode will not only be required for inode
events, but for any event that doesn't provide a descriptor.
Link: https://lore.kernel.org/r/20211025192746.66445-17-krisman@collabora.com Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Instead of failing, encode an invalid file handle in fanotify_encode_fh
if no inode is provided. This bogus file handle will be reported by
FAN_FS_ERROR for non-inode errors.
Link: https://lore.kernel.org/r/20211025192746.66445-16-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Allow passing a NULL hash to fanotify_encode_fh and avoid calculating
the hash if not needed.
Link: https://lore.kernel.org/r/20211025192746.66445-15-krisman@collabora.com Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
FAN_FS_ERROR doesn't support DFID, but this function is still called for
every event. The problem is that it is not capable of handling null
inodes, which now can happen in case of superblock error events. For
this case, just returning dir will be enough.
Link: https://lore.kernel.org/r/20211025192746.66445-14-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For group-wide mempool backed events, like FS_ERROR, the free_event
callback will need to reference the group's mempool to free the memory.
Wire that argument into the current callers.
Link: https://lore.kernel.org/r/20211025192746.66445-13-krisman@collabora.com Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
FAN_FS_ERROR allows events without inodes - i.e. for file system-wide
errors. Even though fsnotify_handle_inode_event is not currently used
by fanotify, this patch protects other backends from cases where neither
inode or dir are provided. Also document the constraints of the
interface (inode and dir cannot be both NULL).
Link: https://lore.kernel.org/r/20211025192746.66445-12-krisman@collabora.com Suggested-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Some file system events (i.e. FS_ERROR) might not be associated with an
inode or directory. For these, we can retrieve the super block from the
data field. But, since the super_block is available in the data field
on every event type, simplify the code to always retrieve it from there,
through a new helper.
Link: https://lore.kernel.org/r/20211025192746.66445-11-krisman@collabora.com Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
fsnotify_add_event is growing in number of parameters, which in most
case are just passed a NULL pointer. So, split out a new
fsnotify_insert_event function to clean things up for users who don't
need an insert hook.
Link: https://lore.kernel.org/r/20211025192746.66445-10-krisman@collabora.com Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Similarly to fanotify_is_perm_event and friends, provide a helper
predicate to say whether a mask is of an overflow event.
Link: https://lore.kernel.org/r/20211025192746.66445-9-krisman@collabora.com Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
"FS_IN_IGNORED is completely internal to inotify and there is no need
to set it in i_fsnotify_mask at all, so if we remove the bit from the
output of inotify_arg_to_mask() no functionality will change and we will
be able to overload the event bit for FS_ERROR."
This is done in preparation to overload FS_ERROR with the notification
mechanism in fanotify.
Link: https://lore.kernel.org/r/20211025192746.66445-8-krisman@collabora.com Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
FAN_FS_ERROR will require fsid, but not necessarily require the
filesystem to expose a file handle. Split those checks into different
functions, so they can be used separately when setting up an event.
While there, update a comment about tmpfs having 0 fsid, which is no
longer true.
Link: https://lore.kernel.org/r/20211025192746.66445-7-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Every time this function is invoked, it is immediately added to
FAN_EVENT_METADATA_LEN, since there is no need to just calculate the
length of info records. This minor clean up folds the rest of the
calculation into the function, which now operates in terms of events,
returning the size of the entire event, including metadata.
Link: https://lore.kernel.org/r/20211025192746.66445-6-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Some events, like the overflow event, are not mergeable, so they are not
hashed. But, when failing inside fsnotify_add_event for lack of space,
fsnotify_add_event() still calls the insert hook, which adds the
overflow event to the merge list. Add a check to prevent any kind of
unmergeable event to be inserted in the hashtable.
Fixes: 94e00d28a680 ("fsnotify: use hash table for faster events merge") Link: https://lore.kernel.org/r/20211025192746.66445-5-krisman@collabora.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clarify argument names and contract for fsnotify_create() and
fsnotify_mkdir() to reflect the anomaly of kernfs, which leaves dentries
negavite after mkdir/create.
Remove the WARN_ON(!inode) in audit code that were added by the Fixes
commit under the wrong assumption that dentries cannot be negative after
mkdir/create.
Define a new data type to pass for event - FSNOTIFY_EVENT_DENTRY.
Use it to pass the dentry instead of it's ->d_inode where available.
This is needed in preparation to the refactor to retrieve the super
block from the data field. In some cases (i.e. mkdir in kernfs), the
data inode comes from a negative dentry, such that no super block
information would be available. By receiving the dentry itself, instead
of the inode, fsnotify can derive the super block even on these cases.
Link: https://lore.kernel.org/r/20211025192746.66445-3-krisman@collabora.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
[Expand explanation in commit message] Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Align the arguments of fsnotify_name() to those of fsnotify().
Link: https://lore.kernel.org/r/20211025192746.66445-2-krisman@collabora.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Where 0x35d is a static call site that's turned into a conditional
tail-call using the Jcc class of instructions.
Teach the in-line static call text patching about this.
Notably, since there is no conditional-ret, in that case patch the Jcc
to point at an empty stub function that does the ret -- or the return
thunk when needed.
Reported-by: "Erhard F." <erhard_f@mailbox.org>
Change-Id: I99c8fc3f721e5d1c74f06710b38d4bac5230303a Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://lore.kernel.org/r/Y9Kdg9QjHkr9G5b5@hirez.programming.kicks-ass.net
[cascardo: __static_call_validate didn't have the bool tramp argument] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to re-write Jcc.d32 instructions text_poke_bp() needs to be
taught about them.
The biggest hurdle is that the whole machinery is currently made for 5
byte instructions and extending this would grow struct text_poke_loc
which is currently a nice 16 bytes and used in an array.
However, since text_poke_loc contains a full copy of the (s32)
displacement, it is possible to map the Jcc.d32 2 byte opcodes to
Jcc.d8 1 byte opcode for the int3 emulation.
This then leaves the replacement bytes; fudge that by only storing the
last 5 bytes and adding the rule that 'length == 6' instruction will
be prefixed with a 0x0f byte.
Change-Id: Ie3f72c6b92f865d287c8940e5a87e59d41cfaa27 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20230123210607.115718513@infradead.org
[cascardo: there is no emit_call_track_retpoline] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mitigation for RFDS requires RFDS_CLEAR capability which is enumerated
by MSR_IA32_ARCH_CAPABILITIES bit 27. If the host has it set, export it
to guests so that they can deploy the mitigation.
RFDS_NO indicates that the system is not vulnerable to RFDS, export it
to guests so that they don't deploy the mitigation unnecessarily. When
the host is not affected by X86_BUG_RFDS, but has RFDS_NO=0, synthesize
RFDS_NO to the guest.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RFDS is a CPU vulnerability that may allow userspace to infer kernel
stale data previously used in floating point registers, vector registers
and integer registers. RFDS only affects certain Intel Atom processors.
Intel released a microcode update that uses VERW instruction to clear
the affected CPU buffers. Unlike MDS, none of the affected cores support
SMT.
Add RFDS bug infrastructure and enable the VERW based mitigation by
default, that clears the affected buffers just before exiting to
userspace. Also add sysfs reporting and cmdline parameter
"reg_file_data_sampling" to control the mitigation.
For details see:
Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
[ pawan: - Resolved conflicts in sysfs reporting.
- s/ATOM_GRACEMONT/ALDERLAKE_N/ATOM_GRACEMONT is called
ALDERLAKE_N in 6.6. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently MMIO Stale Data mitigation for CPUs not affected by MDS/TAA is
to only deploy VERW at VMentry by enabling mmio_stale_data_clear static
branch. No mitigation is needed for kernel->user transitions. If such
CPUs are also affected by RFDS, its mitigation may set
X86_FEATURE_CLEAR_CPU_BUF to deploy VERW at kernel->user and VMentry.
This could result in duplicate VERW at VMentry.
Fix this by disabling mmio_stale_data_clear static branch when
X86_FEATURE_CLEAR_CPU_BUF is enabled.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During VMentry VERW is executed to mitigate MDS. After VERW, any memory
access like register push onto stack may put host data in MDS affected
CPU buffers. A guest can then use MDS to sample host data.
Although likelihood of secrets surviving in registers at current VERW
callsite is less, but it can't be ruled out. Harden the MDS mitigation
by moving the VERW mitigation late in VMentry path.
Note that VERW for MMIO Stale Data mitigation is unchanged because of
the complexity of per-guest conditional VERW which is not easy to handle
that late in asm with no GPRs available. If the CPU is also affected by
MDS, VERW is unconditionally executed late in asm regardless of guest
having MMIO access.
Use EFLAGS.CF instead of EFLAGS.ZF to track whether to use VMRESUME versus
VMLAUNCH. Freeing up EFLAGS.ZF will allow doing VERW, which clobbers ZF,
for MDS mitigations as late as possible without needing to duplicate VERW
for both paths.
[ pawan: resolved merge conflict in __vmx_vcpu_run in backport. ]
Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-5-a6216d83edb7%40linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VERW mitigation at exit-to-user is enabled via a static branch
mds_user_clear. This static branch is never toggled after boot, and can
be safely replaced with an ALTERNATIVE() which is convenient to use in
asm.
Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user
path. Also remove the now redundant VERW in exc_nmi() and
arch_exit_to_user_mode().
Mitigation for MDS is to use VERW instruction to clear any secrets in
CPU Buffers. Any memory accesses after VERW execution can still remain
in CPU buffers. It is safer to execute VERW late in return to user path
to minimize the window in which kernel data can end up in CPU buffers.
There are not many kernel secrets to be had after SWITCH_TO_USER_CR3.
Add support for deploying VERW mitigation after user register state is
restored. This helps minimize the chances of kernel data ending up into
CPU buffers after executing VERW.
Note that the mitigation at the new location is not yet enabled.
Corner case not handled
=======================
Interrupts returning to kernel don't clear CPUs buffers since the
exit-to-user path is expected to do that anyways. But, there could be
a case when an NMI is generated in kernel after the exit-to-user path
has cleared the buffers. This case is not handled and NMI returning to
kernel don't clear CPU buffers because:
1. It is rare to get an NMI after VERW, but before returning to user.
2. For an unprivileged user, there is no known way to make that NMI
less rare or target it.
3. It would take a large number of these precisely-timed NMIs to mount
an actual attack. There's presumably not enough bandwidth.
4. The NMI in question occurs after a VERW, i.e. when user state is
restored and most interesting data is already scrubbed. Whats left
is only the data that NMI touches, and that may or may not be of
any interest.
[ pawan: resolved conflict for hunk swapgs_restore_regs_and_return_to_usermode ]
MDS mitigation requires clearing the CPU buffers before returning to
user. This needs to be done late in the exit-to-user path. Current
location of VERW leaves a possibility of kernel data ending up in CPU
buffers for memory accesses done after VERW such as:
1. Kernel data accessed by an NMI between VERW and return-to-user can
remain in CPU buffers since NMI returning to kernel does not
execute VERW to clear CPU buffers.
2. Alyssa reported that after VERW is executed,
CONFIG_GCC_PLUGIN_STACKLEAK=y scrubs the stack used by a system
call. Memory accesses during stack scrubbing can move kernel stack
contents into CPU buffers.
3. When caller saved registers are restored after a return from
function executing VERW, the kernel stack accesses can remain in
CPU buffers(since they occur after VERW).
To fix this VERW needs to be moved very late in exit-to-user path.
In preparation for moving VERW to entry/exit asm code, create macros
that can be used in asm. Also make VERW patching depend on a new feature
flag X86_FEATURE_CLEAR_CPU_BUF.
[pawan: - Runtime patch jmp instead of verw in macro CLEAR_CPU_BUFFERS
due to lack of relative addressing support for relocations
in kernels < v6.5.
- Add UNWIND_HINT_EMPTY to avoid warning:
arch/x86/entry/entry.o: warning: objtool: mds_verw_sel+0x0: unreachable instruction]
Reported-by: Alyssa Milburn <alyssa.milburn@intel.com> Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-1-a6216d83edb7%40linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a macro _ASM_RIP() to add a (%rip) suffix on 64 bits only. This is
useful for immediate memory references where one doesn't want gcc
to possibly use a register indirection as it may in the case of an "m"
constraint.
[ pawan: resolved merged conflict for __ASM_REGPFX ]
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Link: https://lkml.kernel.org/r/20210910195910.2542662-3-hpa@zytor.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Presently stage2_apply_range() works on a batch of memory addressed by a
stage 2 root table entry for the VM. Depending on the IPA limit of the
VM and PAGE_SIZE of the host, this could address a massive range of
memory. Some examples:
4 level, 4K paging -> 512 GB batch size
3 level, 64K paging -> 4TB batch size
Unsurprisingly, working on such a large range of memory can lead to soft
lockups. When running dirty_log_perf_test:
Use the largest supported block mapping for the configured page size as
the batch granularity. In so doing the walker is guaranteed to visit a
leaf only once.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221007234151.461779-3-oliver.upton@linux.dev Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Work out the minimum page table level where KVM supports block mappings
at compile time. While at it, rewrite the comment around supported block
mappings to directly describe what KVM supports instead of phrasing in
terms of what it does not.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221007234151.461779-2-oliver.upton@linux.dev Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When about to transmit the function imx_uart_start_tx is called and in
some RS485 configurations this function will call imx_uart_stop_rx. The
problem is that imx_uart_stop_rx will enable loopback in order to
release the RS485 bus, but when loopback is enabled transmitted data
will just be looped to RX.
This patch fixes the above problem by not enabling loopback when about
to transmit.
This driver now works well when used for RS485 half duplex master
configurations.
Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") Cc: stable <stable@kernel.org> Signed-off-by: Rickard x Andersson <rickaran@axis.com> Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Link: https://lore.kernel.org/r/20240221115304.509811-1-rickaran@axis.com Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
console_trylock_spinning() may takeover the console lock from a
schedulable context. Update @console_may_schedule to make sure it
reflects a trylock acquire.
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com> Closes: https://lore.kernel.org/lkml/20240222090538.23017-1-quic_mojha@quicinc.com Fixes: dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes") Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/875xybmo2z.fsf@jogness.linutronix.de Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The swiotlb does not support a mapping size > swiotlb_max_mapping_size().
On the other hand, with a 64KB PAGE_SIZE configuration, it's observed that
an NVME device can map a size between 300KB~512KB, which certainly failed
the swiotlb mappings, though the default pool of swiotlb has many slots:
systemd[1]: Started Journal Service.
=> nvme 0000:00:01.0: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 32 (slots)
note: journal-offline[392] exited with irqs disabled
note: journal-offline[392] exited with preempt_count 1
Since untrusted devices might go down the swiotlb pathway with dma-iommu,
these devices should not map a size larger than swiotlb_max_mapping_size.
To fix this bug, add iommu_dma_max_mapping_size() for untrusted devices to
take into account swiotlb_max_mapping_size() v.s. iova_rcache_range() from
the iommu_dma_opt_mapping_size().
Fixes: 82612d66d51d ("iommu: Allow the dma-iommu api to use bounce buffers") Link: https://lore.kernel.org/r/ee51a3a5c32cf885b18f6416171802669f4a718a.1707851466.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
[will: Drop redundant is_swiotlb_active(dev) check] Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add the IOMMU callback for DMA mapping API dma_opt_mapping_size(), which
allows the drivers to know the optimal mapping limit and thus limit the
requested IOVA lengths.
This value is based on the IOVA rcache range limit, as IOVAs allocated
above this limit must always be newly allocated, which may be quite slow.
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: afc5aa46ed56 ("iommu/dma: Force swiotlb_max_mapping_size on an untrusted device") Signed-off-by: Sasha Levin <sashal@kernel.org>
Streaming DMA mapping involving an IOMMU may be much slower for larger
total mapping size. This is because every IOMMU DMA mapping requires an
IOVA to be allocated and freed. IOVA sizes above a certain limit are not
cached, which can have a big impact on DMA mapping performance.
Provide an API for device drivers to know this "optimal" limit, such that
they may try to produce mapping which don't exceed it.
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: afc5aa46ed56 ("iommu/dma: Force swiotlb_max_mapping_size on an untrusted device") Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolin reports that swiotlb buffer allocations fail for an NVME device
behind an IOMMU using 64KiB pages. This is because we end up with a
minimum allocation alignment of 64KiB (for the IOMMU to map the buffer
safely) but a minimum DMA alignment mask corresponding to a 4KiB NVME
page (i.e. preserving the 4KiB page offset from the original allocation).
If the original address is not 4KiB-aligned, the allocation will fail
because swiotlb_search_pool_area() erroneously compares these unmasked
bits with the 64KiB-aligned candidate allocation.
Tweak swiotlb_search_pool_area() so that the DMA alignment mask is
reduced based on the required alignment of the allocation.
Fixes: 82612d66d51d ("iommu: Allow the dma-iommu api to use bounce buffers") Link: https://lore.kernel.org/r/cover.1707851466.git.nicolinc@nvidia.com Reported-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Patch series "minmax: Relax type checks in min() and max()", v4.
The min() (etc) functions in minmax.h require that the arguments have
exactly the same types.
However when the type check fails, rather than look at the types and fix
the type of a variable/constant, everyone seems to jump on min_t(). In
reality min_t() ought to be rare - when something unusual is being done,
not normality.
The orginal min() (added in 2.4.9) replaced several inline functions and
included the type - so matched the implicit casting of the function call.
This was renamed min_t() in 2.4.10 and the current min() added. There is
no actual indication that the conversion of negatve values to large
unsigned values has ever been an actual problem.
A quick grep shows 5734 min() and 4597 min_t(). Having the casts on
almost half of the calls shows that something is clearly wrong.
If the wrong type is picked (and it is far too easy to pick the type of
the result instead of the larger input) then significant bits can get
discarded.
Pretty much the worst example is in the derived clamp_val(), consider:
unsigned char x = 200u;
y = clamp_val(x, 10u, 300u);
I also suspect that many of the min_t(u16, ...) are actually wrong. For
example copy_data() in printk_ringbuffer.c contains:
data_size = min_t(u16, buf_size, len);
Here buf_size is 'unsigned int' and len 'u16', pass a 64k buffer (can you
prove that doesn't happen?) and no data is returned. Apparantly it did -
and has since been fixed.
The only reason that most of the min_t() are 'fine' is that pretty much
all the values in the kernel are between 0 and INT_MAX.
Patch 1 adds umin(), this uses integer promotions to convert both
arguments to 'unsigned long long'. It can be used to compare a signed
type that is known to contain a non-negative value with an unsigned type.
The compiler typically optimises it all away. Added first so that it can
be referred to in patch 2.
Patch 2 replaces the 'same type' check with a 'same signedness' one. This
makes min(unsigned_int_var, sizeof()) be ok. The error message is also
improved and will contain the expanded form of both arguments (useful for
seeing how constants are defined).
Patch 3 just fixes some whitespace.
Patch 4 allows comparisons of 'unsigned char' and 'unsigned short' to
signed types. The integer promotion rules convert them both to 'signed
int' prior to the comparison so they can never cause a negative value be
converted to a large positive one.
Patch 5 (rewritted for v4) allows comparisons of unsigned values against
non-negative constant integer expressions. This makes
min(unsigned_int_var, 4) be ok.
The only common case that is still errored is the comparison of signed
values against unsigned constant integer expressions below __INT_MAX__.
Typcally min(int_val, sizeof (foo)), the real fix for this is casting the
constant: min(int_var, (int)sizeof (foo)).
With all the patches applied pretty much all the min_t() could be replaced
by min(), and most of the rest by umin(). However they all need careful
inspection due to code like:
sz = min_t(unsigned char, sz - 1, LIM - 1) + 1;
which converts 0 to LIM.
This patch (of 6):
umin() and umax() can be used when min()/max() errors a signed v unsigned
compare when the signed value is known to be non-negative.
Unlike min_t(some_unsigned_type, a, b) umin() will never mask off high
bits if an inappropriate type is selected.
The '+ 0u + 0ul + 0ull' may look strange.
The '+ 0u' is needed for 'signed int' on 64bit systems.
The '+ 0ul' is needed for 'signed long' on 32bit systems.
The '+ 0ull' is needed for 'signed long long'.
Link: https://lkml.kernel.org/r/b97faef60ad24922b530241c5d7c933c@AcuMS.aculab.com Link: https://lkml.kernel.org/r/41d93ca827a248698ec64bf57e0c05a5@AcuMS.aculab.com Signed-off-by: David Laight <david.laight@aculab.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 51b30ecb73b4 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present") Signed-off-by: Sasha Levin <sashal@kernel.org>
When a probe is registered at the trace_sys_enter() tracepoint, and that
probe changes the system call number, the old system call still gets
executed. This worked correctly until commit b6ec41346103 ("core/entry:
Report syscall correctly for trace and audit"), which removed the
re-evaluation of the syscall number after the trace point.
Restore the original semantics by re-evaluating the system call number
after trace_sys_enter().
The performance impact of this re-evaluation is minimal because it only
takes place when a trace point is active, and compared to the actual trace
point overhead the read from a cache hot variable is negligible.
Fixes: b6ec41346103 ("core/entry: Report syscall correctly for trace and audit") Signed-off-by: André Rösti <an.roesti@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240311211704.7262-1-an.roesti@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The prescaler in the "Global Timer Control Register bit assignments" is
documented to use bits [15:8], which means that the maximum prescaler
register value is 0xff.
To align with ACPI 6.3+, since bit_width can be any 8-bit value, it
cannot be depended on to be always on a clean 8b boundary. This was
uncovered on the Cobalt 100 platform.
Instead, use access_width to determine the size and use the offset and
width to shift and mask the bits to read/write out. Make sure to add a
check for system memory since pcc redefines the access_width to
subspace id.
If access_width is not set, then fall back to using bit_width.
Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
[ rjw: Subject and changelog edits, comment adjustments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ eahariha: Backport to v5.15 by dropping SystemIO bits as
commit a2c8f92bea5f is not present ] Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
shutdown_pirq and startup_pirq are not taking the
irq_mapping_update_lock because they can't due to lock inversion. Both
are called with the irq_desc->lock being taking. The lock order,
however, is first irq_mapping_update_lock and then irq_desc->lock.
This opens multiple races:
- shutdown_pirq can be interrupted by a function that allocates an event
channel:
Assume here event channel e refers here to the same event channel
number.
After this race the evtchn_to_irq mapping for e is invalid (-1).
- __startup_pirq races with __unbind_from_irq in a similar way. Because
__startup_pirq doesn't take irq_mapping_update_lock it can grab the
evtchn that __unbind_from_irq is currently freeing and cleaning up. In
this case even though the event channel is allocated, its mapping can
be unset in evtchn_to_irq.
The fix is to first cleanup the mappings and then close the event
channel. In this way, when an event channel gets allocated it's
potential previous evtchn_to_irq mappings are guaranteed to be unset already.
This is also the reverse order of the allocation where first the event
channel is allocated and then the mappings are setup.
On a 5.10 kernel prior to commit 3fcdaf3d7634 ("xen/events: modify internal
[un]bind interfaces"), we hit a BUG like the following during probing of NVMe
devices. The issue is that during nvme_setup_io_queues, pci_free_irq
is called for every device which results in a call to shutdown_pirq.
With many nvme devices it's therefore likely to hit this race during
boot because there will be multiple calls to shutdown_pirq and
startup_pirq are running potentially in parallel.
If registering the platform device fails, the lookup table is
removed in the error path. On module removal we would try to
remove the lookup table again. Fix this by setting priv->lookup
only if registering the platform device was successful.
In addition free the memory allocated for the lookup table in
the error path.
The first kiocb_set_cancel_fn() argument may point at a struct kiocb
that is not embedded inside struct aio_kiocb. With the current code,
depending on the compiler, the req->ki_ctx read happens either before
the IOCB_AIO_RW test or after that test. Move the req->ki_ctx read such
that it is guaranteed that the IOCB_AIO_RW test happens first.
Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: Benjamin LaHaise <ben@communityfibre.ca> Cc: Eric Biggers <ebiggers@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Avi Kivity <avi@scylladb.com> Cc: Sandeep Dhavale <dhavale@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: stable@vger.kernel.org Fixes: b820de741ae4 ("fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240304235715.3790858-1-bvanassche@acm.org Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the same issue that was fixed for the VGA text buffer in commit 39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the
buffer"). The cure is also the same i.e. replace memcpy() with memmove()
due to the overlaping buffers.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/sn184on2-3p0q-0qrq-0218-895349s4753o@syhkavp.arg Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the remote uart device is not connected or not enabled after booting
up, the CTS line is high by default. At this time, if we enable the flow
control when opening the device(for example, using “stty -F /dev/ttyLP4
crtscts” command), there will be a pending idle preamble(first writing 0
and then writing 1 to UARTCTRL_TE will queue an idle preamble) that
cannot be sent out, resulting in the uart port fail to close(waiting for
TX empty), so the user space stty will have to wait for a long time or
forever.
This is an LPUART IP bug(idle preamble has higher priority than CTS),
here add a workaround patch to enable TX CTS after enabling UARTCTRL_TE,
so that the idle preamble does not get stuck due to CTS is deasserted.
Unused USB ports may have bogus location data in ACPI PLD tables.
This causes port peering failures as these unused USB2 and USB3 ports
location may match.
Due to these failures the driver prints a
"usb: port power management may be unreliable" warning, and
unnecessarily blocks port power off during runtime suspend.
This was debugged on a couple DELL systems where the unused ports
all returned zeroes in their location data.
Similar bugreports exist for other systems.
Don't try to peer or match ports that have connect type set to
USB_PORT_NOT_USED.
While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX
set to 65536, it has been observed that we receive short packets,
which come at interval of 5-10 seconds sometimes and have block
length zero but still contain 1-2 valid datagrams present.
According to the NCM spec:
"If wBlockLength = 0x0000, the block is terminated by a
short packet. In this case, the USB transfer must still
be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If
exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent,
and the size is a multiple of wMaxPacketSize for the
given pipe, then no ZLP shall be sent.
wBlockLength= 0x0000 must be used with extreme care, because
of the possibility that the host and device may get out of
sync, and because of test issues.
wBlockLength = 0x0000 allows the sender to reduce latency by
starting to send a very large NTB, and then shortening it when
the sender discovers that there’s not sufficient data to justify
sending a large NTB"
However, there is a potential issue with the current implementation,
as it checks for the occurrence of multiple NTBs in a single
giveback by verifying if the leftover bytes to be processed is zero
or not. If the block length reads zero, we would process the same
NTB infintely because the leftover bytes is never zero and it leads
to a crash. Fix this by bailing out if block length reads zero.
Cc: stable@vger.kernel.org Fixes: 427694cfaafa ("usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20240228115441.2105585-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values
in the ATA ID information to calculate cylinder and head values when
creating a CDB for READ or WRITE commands. The calculation involves
division and modulus operations, which will cause a crash if either of
these values is 0. While this never happens with a genuine device, it
could happen with a flawed or subversive emulation, as reported by the
syzbot fuzzer.
Protect against this possibility by refusing to bind to the device if
either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID
information is 0. This requires isd200_Initialization() to return a
negative error code when initialization fails; currently it always
returns 0 (even when there is an error).
Error in mmu_interval_notifier_insert() can leave a NULL
notifier.mm pointer. Catch that and return early.
Fixes: ed29c2691188 ("drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7.") Cc: <stable@vger.kernel.org> # v5.13+
[tursulin: Added Fixes and cc stable.] Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Shawn Lee <shawn.c.lee@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219125047.28906-1-nirmoy.das@intel.com Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit db7bbd13f08774cde0332c705f042e327fe21e73) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .release() function does not get called until all readers of a file
descriptor are finished.
If a thread is blocked on reading a file descriptor in ring_buffer_wait(),
and another thread closes the file descriptor, it will not wake up the
other thread as ring_buffer_wake_waiters() is called by .release(), and
that will not get called until the .read() is finished.
The issue originally showed up in trace-cmd, but the readers are actually
other processes with their own file descriptors. So calling close() would wake
up the other tasks because they are blocked on another descriptor then the
one that was closed(). But there's other wake ups that solve that issue.
When a thread is blocked on a read, it can still hang even when another
thread closed its descriptor.
This is what the .flush() callback is for. Have the .flush() wake up the
readers.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202432.107909457@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linke li <lilinke99@qq.com> Cc: Rabin Vincent <rabin@rab.in> Fixes: f3ddb74ad0790 ("tracing: Wake up ring buffer waiters on closing of the file") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do the cache flush of converted pages in svm_register_enc_region() before
dropping kvm->lock to fix use-after-free issues where region and/or its
array of pages could be freed by a different task, e.g. if userspace has
__unregister_enc_region_locked() already queued up for the region.
Note, the "obvious" alternative of using local variables doesn't fully
resolve the bug, as region->pages is also dynamically allocated. I.e. the
region structure itself would be fine, but region->pages could be freed.
Flushing multiple pages under kvm->lock is unfortunate, but the entire
flow is a rare slow path, and the manual flush is only needed on CPUs that
lack coherency for encrypted memory.
Fixes: 19a23da53932 ("Fix unsynchronized access to sev members through svm_register_enc_region") Reported-by: Gabe Kirkpatrick <gkirkpatrick@google.com> Cc: Josh Eads <josheads@google.com> Cc: Peter Gonda <pgonda@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20240217013430.2079561-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a couple recent changes in LLVM, there is a warning (or error with
CONFIG_WERROR=y or W=e) from the compile time fortify source routines,
specifically the memset() in copy_to_user_tmpl().
In file included from net/xfrm/xfrm_user.c:14:
...
include/linux/fortify-string.h:438:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
438 | __write_overflow_field(p_size_field, size);
| ^
1 error generated.
While ->xfrm_nr has been validated against XFRM_MAX_DEPTH when its value
is first assigned in copy_templates() by calling validate_tmpl() first
(so there should not be any issue in practice), LLVM/clang cannot really
deduce that across the boundaries of these functions. Without that
knowledge, it cannot assume that the loop stops before i is greater than
XFRM_MAX_DEPTH, which would indeed result a stack buffer overflow in the
memset().
To make the bounds of ->xfrm_nr clear to the compiler and add additional
defense in case copy_to_user_tmpl() is ever used in a path where
->xfrm_nr has not been properly validated against XFRM_MAX_DEPTH first,
add an explicit bound check and early return, which clears up the
warning.
The VMBUS_RING_SIZE macro adds space for a ring buffer header to the
requested ring buffer size. The header size is always 1 page, and so
its size varies based on the PAGE_SIZE for which the kernel is built.
If the requested ring buffer size is a large power-of-2 size and the header
size is small, the resulting size is inefficient in its use of memory.
For example, a 512 Kbyte ring buffer with a 4 Kbyte page size results in
a 516 Kbyte allocation, which is rounded to up 1 Mbyte by the memory
allocator, and wastes 508 Kbytes of memory.
In such situations, the exact size of the ring buffer isn't that important,
and it's OK to allocate the 4 Kbyte header at the beginning of the 512
Kbytes, leaving the ring buffer itself with just 508 Kbytes. The memory
allocation can be 512 Kbytes instead of 1 Mbyte and nothing is wasted.
Update VMBUS_RING_SIZE to implement this approach for "large" ring buffer
sizes. "Large" is somewhat arbitrarily defined as 8 times the size of
the ring buffer header (which is of size PAGE_SIZE). For example, for
4 Kbyte PAGE_SIZE, ring buffers of 32 Kbytes and larger use the first
4 Kbytes as the ring buffer header. For 64 Kbyte PAGE_SIZE, ring buffers
of 512 Kbytes and larger use the first 64 Kbytes as the ring buffer
header. In both cases, smaller sizes add space for the header so
the ring size isn't reduced too much by using part of the space for
the header. For example, with a 64 Kbyte page size, we don't want
a 128 Kbyte ring buffer to be reduced to 64 Kbytes by allocating half
of the space for the header. In such a case, the memory allocation
is less efficient, but it's the best that can be done.
While the new algorithm slightly changes the amount of space allocated
for ring buffers by drivers that use VMBUS_RING_SIZE, the devices aren't
known to be sensitive to small changes in ring buffer size, so there
shouldn't be any effect.
Fixes: c1135c7fd0e9 ("Drivers: hv: vmbus: Introduce types of GPADL") Fixes: 6941f67ad37d ("hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218502 Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Tested-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Link: https://lore.kernel.org/r/20240229004533.313662-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240229004533.313662-1-mhklinux@outlook.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This set combination is weird: it allows for elements to be
added/deleted, but once bound to the rule it cannot be updated anymore.
Eventually, all elements expire, leading to an empty set which cannot
be updated anymore. Reject this flags combination.
Cc: stable@vger.kernel.org Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the rhashtable set gc runs asynchronously, a race allows it to
collect elements from anonymous sets with timeouts while it is being
released from the commit path.
Mingi Cho originally reported this issue in a different path in 6.1.x
with a pipapo set with low timeouts which is not possible upstream since 7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set
element timeout").
Fix this by setting on the dead flag for anonymous sets to skip async gc
in this case.
According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on
transaction abort"), Florian plans to accelerate abort path by releasing
objects via workqueue, therefore, this sets on the dead flag for abort
path too.
Cc: stable@vger.kernel.org Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Reported-by: Mingi Cho <mgcho.minic@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpufreq: brcmstb-avs-cpufreq: fix up "add check for cpufreq_cpu_get's return value"
In commit d951cf510fb0 ("cpufreq: brcmstb-avs-cpufreq: add check for
cpufreq_cpu_get's return value"), build warnings occur because a
variable is created after some logic, resulting in:
drivers/cpufreq/brcmstb-avs-cpufreq.c: In function 'brcm_avs_cpufreq_get':
drivers/cpufreq/brcmstb-avs-cpufreq.c:486:9: error: ISO C90 forbids mixed
declarations and code [-Werror=declaration-after-statement]
486 | struct private_data *priv = policy->driver_data;
| ^~~~~~
cc1: all warnings being treated as errors
make[2]: *** [scripts/Makefile.build:289:
drivers/cpufreq/brcmstb-avs-cpufreq.o] Error 1
make[1]: *** [scripts/Makefile.build:552: drivers/cpufreq] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1907: drivers] Error 2
7ee18d677989 ("x86/power: Make restore_processor_context() sane")
kmemleak reports this issue:
unreferenced object 0xf68241e0 (size 32):
comm "swapper/0", pid 1, jiffies 4294668610 (age 68.432s)
hex dump (first 32 bytes):
00 cc cc cc 29 10 01 c0 00 00 00 00 00 00 00 00 ....)...........
00 42 82 f6 cc cc cc cc cc cc cc cc cc cc cc cc .B..............
backtrace:
[<461c1d50>] __kmem_cache_alloc_node+0x106/0x260
[<ea65e13b>] __kmalloc+0x54/0x160
[<c3858cd2>] msr_build_context.constprop.0+0x35/0x100
[<46635aff>] pm_check_save_msr+0x63/0x80
[<6b6bb938>] do_one_initcall+0x41/0x1f0
[<3f3add60>] kernel_init_freeable+0x199/0x1e8
[<3b538fde>] kernel_init+0x1a/0x110
[<938ae2b2>] ret_from_fork+0x1c/0x28
Which is a false positive.
Reproducer:
- Run rsync of whole kernel tree (multiple times if needed).
- start a kmemleak scan
- Note this is just an example: a lot of our internal tests hit these.
The root cause is similar to the fix in:
b0b592cf0836 x86/pm: Fix false positive kmemleak report in msr_build_context()
ie. the alignment within the packed struct saved_context
which has everything unaligned as there is only "u16 gs;" at start of
struct where in the past there were four u16 there thus aligning
everything afterwards. The issue is with the fact that Kmemleak only
searches for pointers that are aligned (see how pointers are scanned in
kmemleak.c) so when the struct members are not aligned it doesn't see
them.
Testing:
We run a lot of tests with our CI, and after applying this fix we do not
see any kmemleak issues any more whilst without it we see hundreds of
the above report. From a single, simple test run consisting of 416 individual test
cases on kernel 5.10 x86 with kmemleak enabled we got 20 failures due to this,
which is quite a lot. With this fix applied we get zero kmemleak related failures.
[Why]
When mode switching is triggered there is momentary noise visible on
some HDMI TV or displays.
[How]
Wait for 2 frames to make sure we have enough time to send out AV mute
and sink receives a full frame.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Otherwise after the GTT bo is released, the GTT and gart space is freed
but amdgpu_ttm_backend_unbind will not clear the gart page table entry
and leave valid mapping entry pointing to the stale system page. Then
if GPU access the gart address mistakely, it will read undefined value
instead page fault, harder to debug and reproduce the real issue.
Cc: stable@vger.kernel.org Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Previously, patches have been added to limit the reported count of SATA
ports for asm1064 and asm1166 SATA controllers, as those controllers do
report more ports than physically having.
While it is allowed to report more ports than physically having in CAP.NP,
it is not allowed to report more ports than physically having in the PI
(Ports Implemented) register, which is what these HBAs do.
(This is a AHCI spec violation.)
Unfortunately, it seems that the PMP implementation in these ASMedia HBAs
is also violating the AHCI and SATA-IO PMP specification.
What these HBAs do is that they do not report that they support PMP
(CAP.SPM (Supports Port Multiplier) is not set).
Instead, they have decided to add extra "virtual" ports in the PI register
that is used if a port multiplier is connected to any of the physical
ports of the HBA.
Enumerating the devices behind the PMP as specified in the AHCI and
SATA-IO specifications, by using PMP READ and PMP WRITE commands to the
physical ports of the HBA is not possible, you have to use the "virtual"
ports.
This is of course bad, because this gives us no way to detect the device
and vendor ID of the PMP actually connected to the HBA, which means that
we can not apply the proper PMP quirks for the PMP that is connected to
the HBA.
Limiting the port map will thus stop these controllers from working with
SATA Port Multipliers.
This patch reverts both patches for asm1064 and asm1166, so old behavior
is restored and SATA PMP will work again, but it will also reintroduce the
(minutes long) extra boot time for the ASMedia controllers that do not
have a PMP connected (either on the PCIe card itself, or an external PMP).
However, a longer boot time for some, is the lesser evil compared to some
other users not being able to detect their drives at all.
Fixes: 0077a504e1a4 ("ahci: asm1166: correct count of reported ports") Fixes: 9815e3961754 ("ahci: asm1064: correct count of reported ports") Cc: stable@vger.kernel.org Reported-by: Matt <cryptearth@googlemail.com> Signed-off-by: Conrad Kostecki <conikost@gentoo.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[cassel: rewrote commit message] Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
